Post on 22-Mar-2022
KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de
MITSUBISHI FX 20
Wire EDM machine
Manufacturer MITSUBISHI Model FX 20 Manufacture year 1998 Control MITSUBISHI Machine number 57E20596 Travels X – 500 mm / Y – 350 mm / Z – 300 mm / U+V – 32 mm Table clamping surface 780 x 630 mm
2 - MITSUBISHI FX 20
TECHNICAL DATA
Basic machine Max. workpiece size (W x D x H) 1.050 x 800 x 295 mm
Max. workpiece weight 800 kg
Table dimensions 780 x 630 mm
Travels (X / Y / Z) 500 x 350 x 300 mm
Max. table feed 1.300 mm/min
Wire diameter Ø 0.2 ~ 0.3 mm
Max. wire feed 250 mm/sec
Wire tensions 2 ~ 25 N
Total dimensions (W x D x H), approx. 1.810 x 2.310 x 2.050 mm
Machine weight, approx. 2.550 kg Filtration device Tank capacity 635 l
Flow trough filter 30 l/min
Filter fineness 3 μm
Filtration paper filter (2 pieces)
Electric conductance regulation (0.5 – 20) x 104 Ω/cm
Total dimensions (W x D x H), approx. 800 x 1.700 x 1.720 mm
Weight, empty, approx. 230 kg Machining power supply Power unit transistors output stage
Max. working current 50 A
Generator settings:
Open-circuit voltage 16 settings
Working current 18 settings
Pulse interval 16 settings
Stabilizing circuit A / B / C / E 8 / 16 / 3 / 5 settings
Power supply mode AE 2 settings
Control Input facilities Keyboard, Floppy disk drive 3,5‘‘, RS-232C
Display 14‘‘/37 cm – Colour screen
Controlled axes X, Y, U, V, Z, max. 5 simultaneously
Manual feed Rapid, medium, low, creep speed, gradual (1/5) μm
Manual positioning Input of the coordinates on the screen
Record store 0 – 99 999
Cutting path control High speed drawing
Basic menus on the color screen 9
RS-232C-Interface Code control type (incl. DC1, DC3) / set control type
Maintenance functions Display consumables (hour counter), diagnostic library
Data-hand input (MDI) 100.000 symbols (=260 m NC-punch tapes), 1MB (2.400 m)
Battery backup approx. 1 month
Total dimensions, approx. 650 x 600 x 1.450 mm
Weight, approx. 390 kg
Technical data of the machine
Total power consumption 3-phases 220/220 VAC ± 10%, 50/60 Hz
13,5 kVA
EQUIPMENT
Water bath Automatic wire threading Ejected wire Coolant Wire alignment block User manual / Documentation Machine parameters
3 - MITSUBISHI FX 20
4 - MITSUBISHI FX 20
Machine
5 - MITSUBISHI FX 20
Table
MACHINE PICTURES
6 - MITSUBISHI FX 20
7 - MITSUBISHI FX 20
FLOOR PLAN
8 - MITSUBISHI FX 20
9 - MITSUBISHI FX 20
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*
Thank you very much for your interest
KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de