Post on 25-Sep-2019
Edelstahl - 243 - stainless steel
Kugelhähne Ball Valves
Technische Informationen Technical Information
1. Werden nur aus rost- undsäurebeständigen Edelstählengefertigt.
2. Dadurch größte Einsatz-möglichkeit in allenIndustriezweigen.
3. Durch Vollstromquer-schnittekeine Druckverluste.
4. Leichte Schaltbarkeit auch unterhohem Druck.
5. Durch auswechselbareDichtungen lange Lebensdauer.
6. Einzelprüfungen vor Verlassendes Werkes.
1. Made only from rust proof andacid resistant stainless steel.
2. For a wide range of applications in all industries.
3. No pressure drop due to full flowbore.
4. Easy operation, even under highpressure.
5. Long life due to exchange seals.
6. Individually works tested.
Edelstahl - 244 - stainless steel
Kugelhähne Ball Valves
Zur Auswahl der richtigen Armatur werdenfolgende Angaben mindestens benötigt :
- Betriebsdruck - Betriebstemperatur - Medium
KonstruktionsaufbauAlle Körper der EXMAR-Hochdruck Kugelhähne werden aus 1.4571 gefertigt. DieKugel als drehbares Absperrelement ist“schwimmend“ gelagert mit Vorspannungzwischen Dichtschalen aus POM oder ausanderen Werkstoffen.Das Medium drückt in Fließrichtung beigeschlossener Stellung gegen die Kugel undpresst diese gegen die druckabgewandteDichtschale. Die Dauerdichtheit wird dadurchunterstützt.
Lagerung und EinbauDie Kugelhähne sollen in Offenstellung mitSchutzkappen gelagert werden.Sie sollen auch in Offenstellung eingebautwerden und vor Betätigungen müssen dieLeitungen durchgespült werden, damitRückstände in den Leitungen die Dicht- schalen nicht beschädigen.Die Kugelhähne öffnen und schließen durchDrehung des Schaltgriffes um jeweils 90 °.Zwischenstellungen bewirken eine nichtgewünschte Drosselung des Durchflusses. Der Kugelhahn soll daher stets geschlossen oder bis zum Anschlag geöffnet sein.
PrüfungenEXMAR-Hochdruck Kugelhähne werden aufGehäusefestigkeit und Dichtheit geprüft.Hierbei gelten die Anforderungen nachDIN EN 12266-1.
WerkszeugnisseAuf Wunsch werden Werksbescheinigungenoder Werkszeugnisse nach DIN EN 10204erstellt.
Allgemeine HinweiseDie angegebenen Nenndrücke gelten für einemax. Betriebstemperatur bis zu100 °C für normale Bedingungen bei statischer Druckbelastung.
For orders / inquiries we need the followinginformations :
- working pressure- working temperature- media
Design PrincipleAll EXMAR high pressure ball valves are madeof stainless steel.The ball, as a rotatable close-off unit, ispretensioned and ”floats” in a shell seal madefrom POM or other suitable material.In the closed position the medium pressureacts against the ball in the flow direction, andpresses it against the pressure free side of theshell seal. The continuous leak-free function isthereby enhanced.
Storage and InstallationThe ball valves should be stored in the openposition with dust caps fitted.They should also be installed in the openposition, and, in order to prevent damage tothe shell seals by residue in the piping system,the system should be flushed before operatingthe valves. The ball valves open and close by turning the valve key through 90 °.An inbetween position results in an undesirableflow restriction. A ball valve should thereforebe either fully closed or opened to the stop.
TestsEXMAR high pressure ball valves are testedfor valve body strength and leakage.The requirements of DIN EN 12266-1 apply.
CertificationOn request a works certificate or release notecan be issued according to DIN EN 10204.
General InformationThe given nominal pressures are for normalconditions under static loading at operatingtemperatures of up to 100 °C max.
Edelstahl - 245 - stainless steel
Kugelhähne Ball Valves
Hochdruck Kugelhahn PN 500 High Pressure Ball Valve PN 500
Bei Bestellungen vonHochdruck-Kugelhähnen mitSonderdichtschalen ausWerkstoff PEEK ist an dieCode-Bezeichnung der Zusatz “ PEEK “ erforderlich.
Orders for High Pressure ballvalves with special sealingbushes in material „PEEK“has to add „PEEK“ to theorder-code for the standardvalves.
BauteilPart
Werkstoff Material
1 GehäuseBody
Edelstahl 1.4571stainless steel AISI 316ti
2 KugelBall
Edelstahl 1.4571stainless steel AISI 316ti
3 DichtschaleSealing bush
Pom ( Delrin ) Sonderausführung PEEKauf AnfragePom ( Delrin ) Special Sealing PEEKon request
4 DichtungSealing
O-Ring FPM ( Viton )O-Ring FPM ( Viton )
5 SpindelflachdichtungStem sealing
PTFEPTFE
6 HebelHandle
Druckgußpressure casting
Kugelhähne und Ventile Ball- and Needle Valves
Hochdruck Kugelhahn PN 500 High Pressure Ball Valve PN 500
HKM -G HKM -Gbeidseitig Muffengewinde BSP nach DIN - ISO 228/1,einseitig andere Anschlußart möglich
both sides BSP female thread to DIN - ISO 228/1,different sided connections possible
PN D G L L1 H R SW Typ/Type
500 6 1/8 80 40,0 50 80 22 HKM-G1.8
500 6 1/4 80 40,0 50 80 22 HKM-G1.4
500 10 3/8 80 42,0 74 112 27 HKM-G3.8
500 14 1/2 110 58,8 64 130 32 HKM-G1.2
400 19 3/4 120 64,0 71 130 41 HKM-G3.4
315 24 1/1 140 78,0 83 160 50 HKM-G1.1
Edelstahl - 246 - stainless steel
Kugelhähne und Ventile Ball- and Needle Valves
Hochdruck Kugelhahn PN 500 High Pressure Ball Valve PN 500
HKM - NPT HKM - NPTbeidseitig Muffengewinde NPT nach ANSI B 1.20.1 -1983, einseitig andere Anschlußart möglich
both sides NPT female thread to ANSI B 1.20.1 -1983, different sided connections possible
PN D NPT L L1 H R SW Typ/Type
500 6 1/8 80 40,0 50 80 22 HKM-1.8NPT
500 6 1/4 80 40,0 50 80 22 HKM-1.4NPT
500 10 3/8 80 42,0 74 112 27 HKM-3.8NPT
500 14 1/2 110 58,8 64 130 32 HKM-1.2NPT
400 19 3/4 120 64,0 71 130 41 HKM-3.4NPT
315 24 1 140 78,0 83 160 50 HKM-1.1NPT
Edelstahl - 247 - stainless steel
Kugelhähne und Ventile Ball- and Needle Valves
Hochdruck Kugelhahn PN 500 High Pressure Ball Valve PN 500
HKS HKSbeidsetig Schneidring Anschluß nach DIN 2353,einseitig andere Anschlußart möglich
both sides cutting ring connection to DIN 2353,different sided connections possible
PN D RA L L1 H R SW Typ/Type
315 6 6 76 40 74 112 22 HKS-06L
315 6 8 76 40 74 112 22 HKS-08L
315 10 10 80 42,0 74 112 27 HKS-10L
315 10 12 80 42,0 74 112 27 HKS-12L
315 12 15 110 58,8 64 130 32 HKS-15L
315 14 18 110 58,8 64 130 32 HKS-18L
160 19 22 110 64,0 71 130 41 HKS-22L
160 24 28 140 78,0 83 160 50 HKS-28L
160 24 35 140 78,0 83 160 50 HKS-35L
500 4 6 80 40,0 50 80 22 HKS-06S
500 5 8 80 40,0 50 80 22 HKS-08S
500 6 10 80 40,0 50 80 22 HKS-10S
500 8 12 80 42,0 74 112 27 HKS-12S
500 10 14 80 42,0 74 112 27 HKS-14S
400 13 16 110 58,8 64 130 32 HKS-16S
400 14 20 110 58,8 64 130 32 HKS-20S
400 19 25 110 64,0 71 130 41 HKS-25S
315 24 30 140 78,0 83 160 50 HKS-30S
Edelstahl - 248 - stainless steel
Edelstahl - 249 - stainless steel
Kugelhähne Ball-Valves
Druck-Temperatur-DiagrammHochdruck KugelhahnPOM / Delrin + PEEK
Pressure-Temperature-DiagramHigh pressure ball valvePOM / Delrin + PEEK
Achtung : Bei Bestellungen von Hochdruck-Kugelhähnenmit Sonderdichtschalen aus Werkstoff PEEKist an die Code-Bezeichnung der Zusatz “ PEEK “ erforderlich.
Anmerkung : Der maximal mögliche Betriebsdruck PN kannauf Grund der Anschlüsse unter dem alsmaximal angegebenen Nenndruck PN liegen.
Attention : Orders for High Pressure ball valves withspecial sealing bushes in material „PEEK“ hasto add „PEEK“ to the order-code fort thestandard valves.
Remark: The maximum possible working pressure PNcan lie considerable under the maximum givennominal pressure PN due to the attachment.
Edelstahl - 250 - stainless steel
Kugelhähne Ball-Valves
Niederdruck Kugelhahn PN 130 Low Pressure Ball Valve PN 130
Druck-Temperatur-DiagrammNiederdruck Kugelhahn PTFE
Pressure / temperature diagramLow pressure ball valves PTFE
2-teiligVoller Durchgang,InnengewindeDIN – ISO 228/1Druck 130 bar / ¼ “ – 1 “ Druck 105 bar / 1 ¼ “ – 2 “ Dichtung : PTFE + 15% GF*Temperatur : - 50 °C - 180 °C
2 piecesfull bore, f/f threadDIN – ISO 228/1pressure 130 bar / 2000 psi¼ “ – 1 “ pressure 105 bar / 1500 psi1 ¼ “ – 2 “ PTFE seals + 15% GF*temperature – 50°C up to180°C( - 60 °F up to 360°F )
* Glasfaserverstärkt* Fiber-glass reinforced
1 GehäuseBody
Edelstahl 1.4408AISI 316
2 KugelBall
Edelstahl 1.4408AISI 316
3 DichtungSeal
PTFE + 15 % GF*PTFE + 15 % GF*
4 SpindeldichtungStem sealing
PTFEPTFE
5 StopfbuchseGland
Edelstahl 1.4301AISI 304
6 HebelHandle
Edelstahl 1.4301AISI 304
Kugelhähne und Ventile Ball- and Needle Valves
Niederdruck Kugelhahn PN 130 Low Pressure Ball Valve PN 130
NKM - G PN 130 NKM - G PN 130beidseitig Muffengewinde BSP nach DIN - ISO 228/1,einseitig andere Anschlußart möglich
both sides BSP female thread to DIN - ISO 228/1,different sided connections possible
G (BSP) DN L1 H R Typ/Type
1/4 11,6 60 53 95 NKM-G1.4 - 130
3/8 12,7 60 53 95 NKM-G3.8 - 130
1/2 15,0 63 53 95 NKM-G1.2 - 130
3/4 20,0 77 60 110 NKM-G3.4 - 130
1 25,4 90 74 135 NKM-G1.1 - 130
1 1/4 32,0 100 80 135 NKM-G5.4 - 105
1 1/2 38,0 118 92 165 NKM-G3.2 - 105
2 50,8 138 101 165 NKM-G4.2 - 105
Edelstahl - 251 - stainless steel
Kugelhähne und Ventile Ball- and Needle Valves
Niederdruck Kugelhahn PN 130 Low Pressure Ball Valve PN 130
NKS - PN 130 NKS - PN 130beidseitig Schneidring Anschluß nach DIN 2353,einseitig andere Anschlußart möglich
both sides cutting ring connection to DIN 2353,different sided connections possible
PN DN RA L L1 H R SW Typ/Type
140 4 6 94 60 53 95 19 NKS-06L - 130
140 5 8 94 60 53 95 19 NKS-08L - 130
140 7 10 96 60 53 95 19 NKS-10L - 130
140 9 12 99 60 53 95 19 NKS-12L - 130
140 11 15 108 63 53 95 24 NKS-15L - 130
140 14 18 121 77 60 110 27 NKS-18L - 130
140 18 22 121 77 60 110 32 NKS-22L - 130
140 25 28 138 90,0 74 135 41 NKS-28L - 130
105 32 35 134 100 80 135 46 NKS-35L - 105
105 38 42 142 100 80 135 55 NKS-42L - 105
Edelstahl - 252 - stainless steel
Edelstahl - 253 - stainless steel
Kugelhähne Ball-Valves
Niederdruck Kugelhahn PN 70 Low Pressure Ball Valves PN 70
Druck-Temperatur-DiagrammNiederdruck Kugelhahn PTFE
Pressure / temperature diagramLow pressure ball valves PTFE
2teiligVoller Durchgang,InnengewindeDIN – ISO 228/1 oder NPTDruck 70 bar / ¼ “ – 2 “ Dichtung : PTFETemperatur : - 50 °C - 180 °C
2 piecesfull bore, f/f threadDIN – ISO 228/1 or NPTpressure 70 bar / 1000 psi¼ “ – 2 “ PTFE seats and sealstemperature – 50°C up to235°C( - 60 °F up to 360°F )
1 GehäuseBody
Edelstahl 1.4408AISI 316
2 KugelBall
Edelstahl 1.4408AISI 316
3 DichtungSeal
PTFEPTFE
4 SpindeldichtungStem sealing
PTFEPTFE
5 StopfbuchseGland
Edelstahl 1.4301AISI 304
6 HebelHandle
Edelstahl 1.4301AISI 304
Kugelhähne und Ventile Ball- and Needle Valves
Niederdruck Kugelhahn PN 70 Low Pressure Ball Valve PN 70
NKM - G PN 70 NKM - G PN 70beidseitig Muffengewinde BSP nach DIN - ISO 228/1 both sides BSP female thread to DIN - ISO 228/1
PN G (BSP) DN L H R Typ/Type
70 1/4 11,6 45 51 95 NKM-G1.4
70 3/8 12,7 45 51 95 NKM-G3.8
70 1/2 15,0 57 53 95 NKM-G1.2
70 3/4 20,0 65 60 110 NKM-G3.4
70 1 25,0 76 73 135 NKM-G1.1
70 1 1/4 32,0 88 79 135 NKM-G5.4
70 1 1/2 38,0 102 91 165 NKM-G3.2
70 2 50,0 123 99 165 NKM-G4.2
Edelstahl - 254 - stainless steel
Kugelhähne und Ventile Ball- and Needle Valves
Niederdruck Kugelhahn PN 70 Low Pressure Ball Valve PN 70
NKM - NPT PN 70 NKM - NPT PN 70beidseitig Muffengewinde NPT nach ANSI B 1.20.1 -1983
both sides NPT female thread to ANSI B 1.20.1 - 1983
PN NPT DN L1 H R Typ/Type
70 1/4 11,6 44,5 51 95 NKM-1.4NPT*
70 3/8 12,7 44,5 51 95 NKM-3.8NPT*
70 1/2 15,0 57,0 53 95 NKM-1.2NPT*
70 3/4 20,0 65,0 60 110 NKM-3.4NPT*
70 1 25,0 76,0 73 135 NKM-1.1NPT*
70 1 1/4 32,0 87,5 79 135 NKM-5.4NPT*
70 1 1/2 38,0 102,0 91 165 NKM-3.2NPT*
70 2 50,8 123,0 99 165 NKM-4.2NPT*
*) auf Anfrage
Ebenfalls auf Anfrage PN 130 erhältlich.
*) on request
On request PN 130 is also available.
Edelstahl - 255 - stainless steel
Kugelhähne und Ventile Ball- and Needle Valves
Niederdruck Kugelhahn PN 70 Low Pressure Ball Valve PN 70
NKS PN 70 NKS PN 70beidseitig Schneidring Anschluß nach DIN 2353,einseitig andere Anschlußart möglich
both sides cutting ring connection to DIN 2353,different sided connections possible
PN DN RA L L1 H R SW Typ/Type
70 4 6 79 45 51 95 19 NKS-06L
70 6 8 79 45 51 95 19 NKS-08L
70 7 10 81 45 51 95 19 NKS-10L
70 9 12 96 57 53 95 19 NKS-12L
70 11 15 102 57 53 95 24 NKS-15L
70 14 18 109 65 60 110 27 NKS-18L
70 18 22 109 65 60 110 32 NKS-22L
70 23 28 136 88 79 135 41 NKS-28L
70 23 35 122 88 79 135 46 NKS-35L
70 23 42 130 88 79 135 55 NKS-42L
Edelstahl - 256 - stainless steel
Edelstahl - 257 - stainless steel
Kugelhähne Ball-Valves
Technischer Anhang
Diese Dichtwerkstoffübersicht gilt für dieNormalausführung von EXMAR Kugelhähnenaus Edelstahl.
Die genannten Druck- undTemperaturangaben gelten für normaleBetriebsbedingungen bei statischer Druckbelastung.
Bei Schneidringanschluss Druckstufen nachDIN 2353.
Die Anwendungsgrenzen der Dichtwerkstoffewerden durch Zusammenwirken vonBetriebsdruck und Betriebstemperatur desMediums bestimmt.
In Grenzfällen empfehlen wir Versuche – auchmit anderen Dichtwerkstoffen – mit einemMuster-Kugelhahn durchzuführen.
Technical Appendix
This seal material reference is relevant forstandard EXMAR stainless steel ball valves.
The stated pressure and temperatureinformation is for normal operating conditionsunder static loading.
Pressure levels for cutting ring connectionsaccording to DIN 2353.
The application limits of a seal material aredictated by the interaction between theoperating pressure and temperature of themedia.
In critical cases it is recommended to conducttests with a sample ball valve, and also withvarious seal materials if necessary.
Werkstoff BezeichnungMaterial – Description
HandelsnameTrade Name
Temperatur °CTemperature
EigenschaftenCharacteristics
Polyacetal POM Delrin -30 bis +100 Druck und abriebsfest, geringe Wasser-aufnahme, besonders verwendbar beiHydraulikölen bis 500 bar.Pressure and abraison resistant, lowwater absorbtion, specially suitable for use with hydraulic oils up to 500 bar.
PolytetrafluoräthylenPTFE
Teflon -30 bis +180 Optimale chemische Beständigkeitgegen fast alle Medien, guteGleiteigenschaften, keineWasseraufnahme, bis max. 70 bar.Optimal chemical resistance againstalmost all media, good frictionalproperties, non-water absorbing, up to70 bar.
PolytetrafluoräthylenPTFE + 15% GF
Teflon -30 bis +180 Optimale chemische Beständigkeitgegen fast alle Medien, guteGleiteigenschaften, keineWasseraufnahme, bis max. 140 bar.Optimal chemical resistance againstalmost all media, good frictionalproperties, non-water absorbing, up to140 bar
Polyaryletheretherketon PEEK -40 bis +250 Optimale chemische Beständigkeitgegen fast alle Medien, guteGleiteigenschaften, keineWasseraufnahme, bis max. 500 bar.Optimal chemical resistance againstalmost all media, good frictionalproperties, non-water absorbing, up to500 bar.
Edelstahl - 258 - stainless steel
Kugelhähne Ball-Valves
Automatisierung
Für Kugelhähne :Anschluss: Innengewinde, Außengewinde,Schneidringanschluss, Bördelanschluss,Flanschanschluss, Anschweißenden usw.
Elektrisch12 V, 24 V AC / DC220 V AC, 380 V
PneumatischDoppeltwirkend oder einfachwirkend mitFederrückstellung.
Zubehörz. B. Endschalter, Magnetventile,
Namur Platte etc. auf Anfrage
Automation
For Ball ValvesMechanical connection: Female thread, male thread, cutting ringconnection, flare connection, flange andwelding connection
Electrical12 V, 24 V AC / DC220 V AC, 380 V
PneumaticDouble-acting or single-acting with spring-return mechanism.
Accessoriesp. e. Limit switch, solenoid valve,
Namur plate etc. on request
Edelstahl - 259 - stainless steel
Ventile Valves
Hochdruck-Absperrventile High Pressure Stop Valves
Hochdruck-Absperrventile, durchgeschmiedeteForm mit eingeschraubtem Kopfstück undinnenliegendem Spindelgewinde für universelleEinsatzfälle.Typ : AVD, AVI
KonstruktionsaufbauAlle EXMAR-Ventilgehäuse sind aus EdelstahlWerkstoff 1.4571 geschmiedet. Eineanschließende Wärmebehandlung garantiertein optimales Materialgefüge.
EXMAR-Ventile mit durchgeschmiedetem odereingeschraubtem Kopfstück, haben innen- liegendes Spindelgewinde .Die großzügig dimensionierte Spindel istfeinstbearbeitet und garantiert somit eineleichte Betätigung bei geringstem Verschleißder Stopfbuchsenpackung.
Durch die 2-teilige Spindel wird eine sichereAbdichtung bei dünnflüssigen Mediengewährleistet.
Bei allen Ausführungen ist der Kegel in dieSpindel „eingerollt“, so dass der Kegel drehbar,aber selbstzentrierend und unlösbar ist.
PrüfungenEXMAR-Ventile werden auf Gehäusefestigkeitund Dichtheit geprüft. Hierbei gelten dieAnforderungen nach DIN EN 12266-1.
ZeugnisseAuf Wunsch werden Werksbescheinigungenoder Werkszeugnisse nach DIN EN 10204erstellt.
High Pressure Stop Valve, forged Form withscrewed bonnet and internal stem threaduniversal applications.Typ : AVD, AVI
DesignAll EXMAR valve bodies are forged from stainless steel material AISI 316ti. A final heattreatment guarantees optimum materialstructure.
EXMAR valves with forged or screwed bonnetwith internal or external stem have beendesigned for all operating conditions.
The generously dimensioned spindle is finelyworked and this guarantees smooth operationwith very low wear of the gland packing.
The sealing surfaces of the valve taper arepolished, ensuring secure sealing with highlyfluid media.
In all versions the taper is “rolled into” thespindle so that the taper is rotatable but self-centering and non-detachable.
TestsEXMAR valves are tested for the using stabilityand tightness, The requirements specified inDIN 12266-1.
CertificatesCertificates of conformity or certificates ofcompliance in accordance with DIN 10204 willbe provided upon request.
Edelstahl - 260 - stainless steel
Ventile Valves
Hochdruck-Absperrventildurchgeschmiedete Form
Typ AVD
High Pressure Stop Valveforged form
BauteilPart
Werkstoff Material
BauteilPart
Werkstoff Material
1 GehäuseBody
Edelstahl 1.4571Stainless steel AISI 316 ti 6 Stopfbuchse
GlandEdelstahl 1.4571Stainless steel AISI 316 ti
2 SpindelStem
Edelstahl 1.4571Stainless steel AISI 316 ti 7 Überwurfmutter
NutEdelstahl 1.4571Stainless steel AISI 316 ti
3 DichtkegelNeedle
Edelstahl 1.4571Stainless steel AISI 316 ti 8 Handrad
HandwheelStahlblechSteel plate
4GrundringStationary mountingring
Edelstahl 1.4571Stainless steel AISI 316 ti 9 U-Scheibe
WasherMS-verchromtBrass-chromiumed
5 PackungGland packing
PTFE oder ReingraphitPTFE or Graphite 10 Sechskantmutter
NutMS-verchromtBrass-chromiumed
Kugelhähne und Ventile Ball- and Needle Valves
Hochdruck-Absperrventil High Pressure Valve
AVD - G AVD - Gdurchgeschmiedete FormMuffengewinde zylindrisch, nachDIN ISO 228/1PN 630
forged formBSPP female thread to DIN ISO 228/1PN 630
G G (BSPP) PN L H D d Typ/Type
1/8 1/8 630 65 85 70 4 AVD-G 1.8
1/4 1/4 630 65 85 70 4 AVD-G 1.4
3/8 3/8 630 65 85 70 6 AVD-G 3.8
1/2 1/2 630 65 85 70 6 AVD-G 1.2
Edelstahl - 261 - stainless steel
Kugelhähne und Ventile Ball- and Needle Valves
Hochdruck-Absperrventil High Pressure Valve
AVD - S AVD - Sdurchgeschmiedete FormSchneidringanschluß nach DIN 2353PN 630
forged formCutting ring connection to DIN 2353PN 630
RA PN L H D d Typ/Type
6 630 65 85 70 4 AVD-06 S
8 630 65 85 70 6 AVD-08 S
10 630 65 85 70 6 AVD-10 S
12 630 65 85 70 6 AVD-12 S
Edelstahl - 262 - stainless steel
Edelstahl - 263 - stainless steel
Ventile Valves
Hochdruck-AbsperrventilKopfstück eingeschraubt
High Pressure Stop ValveScrewed in bonnet
Typ AVI
BauteilPart Werkstoff
MaterialBauteilPart
Werkstoff Material
1 GehäuseBody Edelstahl 1.4571
Stainless steel AISI 316 ti7 Packung*
Gland packing*PTFE oder ReingraphitPTFE or Graphite
2 Kopfstück Bonnet Edelstahl 1.4571
Stainless steel AISI 316 ti8 Stopfbuchse
Gland Edelstahl 1.4571Stainless steel AISI 316 ti
3 SpindelStem Edelstahl 1.4571
Stainless steel AISI 316 ti9 Überwurfmutter
Nut Edelstahl 1.4571Stainless steel AISI 316 ti
4 VentilkegelNeedle Edelstahl 1.4571
Stainless steel AISI 316 ti10 Handrad
HandwheelStahlblechSteel plate
5GrundringStationary mountingring
Edelstahl 1.4571Stainless steel AISI 316 ti
11 U-ScheibeWasher
MS-verchromtBrass-chromiumed
6 DichtringGasket ring Edelstahl 1.4571
Stainless steel AISI 316 ti12 Sechskantmutter
NutMS-verchromtBrass-chromiumed
Kugelhähne und Ventile Ball- and Needle Valves
Hochdruck-Absperrventil High Pressure Valve
AVI - G AVI - GKopfstück eingeschraubtMuffengewinde zylindrisch, nachDIN ISO 228/1PN 630
screwed in bonnetBSPP female thread to DIN ISO 228/1PN 630
G PN L H D d Typ/Type
1/4 630 80 113 70 6 AVI-G 1.4
3/8 630 80 113 70 6 AVI-G 3.8
1/2 630 80 113 70 8 AVI-G 1.2
3/4 400 100 125 80 13 AVI-G 3.4
1/1 315 160 180 100 15 AVI-G 1.1
Edelstahl - 264 - stainless steel
Kugelhähne und Ventile Ball- and Needle Valves
Hochdruck-Absperrventil High Pressure Valve
AVI - S AVI - SKopfstück eingeschraubtSchneidringanschluß nach DIN 2353PN 630
screwed in bonnetCutting ring connection to DIN 2353PN 630
RA PN L H D d Typ/Type
6 630 80 113 70 4 AVI-06 S
8 630 80 113 70 6 AVI-08 S
10 630 80 113 70 8 AVI-10 S
12 630 80 113 70 8 AVI-12 S
14 630 100 125 80 11 AVI-14 S
16 400 100 125 80 12 AVI-16 S
20 400 130 125 80 14 AVI-20 S
25 400 130 125 80 14 AVI-25 S
Edelstahl - 265 - stainless steel
Kugelhähne und Ventile Ball- and Needle Valves
Manometer-Ventil Gauge Valve
MV - R / M 16270 MV - R / M 16270ohne PrüfanschlußDIN 16 270durchgeschmiedete FormPN 400
without connection for pressure gaugesDIN 16 270forged formPN 400
Gewinde PN L H D Typ/Type
1/2 400 100 95 60 MV-R 16270 MZ-VA
M 20 x 1,5 400 100 95 60 MV-M 16270 MZ-VA
Packung PTFE (Graphit auf Anfrage)Handrad Kunststoff
Temperaturbereichmit PTFE max. 200°Cmit Graphit max. 400°C
Packing PTFE (Graphite on request)Handwheel Plastic
Temperature rangewith PTFE max. 200°Cwith Graphite max. 400°C
Edelstahl - 266 - stainless steel
Kugelhähne und Ventile Ball- and Needle Valves
Manometer-Ventil Gauge Valve
MV - R / M 16271 MV - R / M 16271mit PrüfanschlußDIN 16 270durchgeschmiedete FormPN 400
with connection for pressure gaugesDIN 16 270forged formPN 400
Gewinde PN L H D Typ/Type
1/2 400 100 95 60 MV-R 16271 MZ-VA
M 20 x 1,5 400 100 95 60 MV-M 16271 MZ-VA
Packung PTFE (Graphit auf Anfrage)Handrad Kunststoff
Temperaturbereichmit PTFE max. 200°Cmit Graphit max. 400°C
Packing PTFE (Graphite on request)Handwheel Plastic
Temperature rangewith PTFE max. 200°Cwith Graphite max. 400 C
Edelstahl - 267 - stainless steel
°
Kugelhähne und Ventile Ball- and Needle Valves
Regel-Ventil Regulating Valve
EFT 2257/2 EFT 2257/2
Zweiwege-Nadelventile
Zweiwege-Nadelventile zur Durchflußregelung inbeide Richtungen.Regelung der Durchflußrichtung durch Dezimalskalaauf dem Griff. Unbeabsichtigte Bedienung, durchFeststellschraube auf dem Griff, nicht möglich.Metallische Abdichtung. Schalttafelmontage mitNutmutter auf Anfrage.
Weiterhin auf Anfrage :- Anschlüsse Außen- / Innengewinde- Dichtung aus Viton- Gewinde NPT- Hutmuttern
Two-way needle valves
Two-way needle valves are suitable for flow control inboth direction.Flow control by a decimal scale on the handwheel.Unintentional operations are not possible due to thelocking srew on the handwheel. Metallic sealing.Panel mounting with nut on request.
Also on request :- Connections male / female- Viton gaskets- NPT threads- Nuts
A B C D E F G H CH Typ/Type
1/8 8,5 38 59,0 64,0 22 13,5 M 17 x 1,0 16 EFT-2257/2-G1.8
1/4 12,5 49 71,0 78,0 27 17,0 M 20 x 1,0 20 EFT-2257/2-G1.4
3/8 12,5 59 84,0 93,0 33 19,5 M 25 x 1,5 25 EFT-2257/2-G3.8
1/2 12,5 68 97,0 107,0 38 21,0 M 30 x 1,5 30 EFT-2257/2-G1.2
3/4 17,0 86 120,5 132,5 47 26,5 M 40 x 1,5 40 EFT-2257/2-G3.4
1 20,0 105 151,5 167,5 58 35,0 M 50 x 1,5 50 EFT-2257/2-G1.1
1 1/4 22,0 120 156,5 172,5 58 35,0 M 50 x 1,5 55 EFT-2257/2-G5.4
Edelstahl - 268 - stainless steel
Kugelhähne und Ventile Ball- and Needle Valves
Drosselrückschlagventil One-way Restrictor
EFT 2257/5 EFT 2257/5
Drosselrückschlagventile
Durchflußregelung in eine Richtung bzw.Durchflußabsperrung, wobei Rückfluß in dieentgegengesetzte Richtung möglich ist.Metallische Abdichtung. Linearität des Durchflussesbeim offenen Ventil, Kontrolle des Druchflusses durchDezimalskala am Griff.Schalttafelmontage auf Anfrage.Öffnungsdruck : 0,35 bar.
Weiterhin auf Anfrage :- Dichtung aus Viton- Gewinde NPT- Hutmuttern
One-way Restrictor
Flow control in one direction or shut-off with reflux inthe opposite direction possible.Metallic sealing. Flow linearity during opened-valve.Flow control by decimal scale on the handwheel.Panel mounting on request.Opening pressure : 0,35 bars.
Also on request :- Viton gaskets- NPT threads- Nuts
A B C D E F G H CH Typ/Type
1/8 8,5 50,0 59,0 64,0 22 13,5 M 17 x 1,0 16 EFT-2257/5-G1.8
1/4 12,5 66,0 71,0 78,0 27 17,0 M 20 x 1,0 20 EFT-2257/5-G1.4
3/8 12,5 79,0 84,0 93,0 33 19,5 M 25 x 1,5 25 EFT-2257/5-G3.8
1/2 15,5 94,5 97,0 107,0 38 21,0 M 30 x 1,5 30 EFT-2257/5-G1.2
3/4 17,0 115,0 120,5 132,5 47 26,5 M 40 x 1,5 40 EFT-2257/5-G3.4
1 20,0 138,5 151,5 167,5 58 35,0 M 50 x 1,5 50 EFT-2257/5-G1.1
1 1/4 22,0 157,0 156,5 172,5 58 35,0 M 50 x 1,5 55 EFT-2257/5-G5.4
Edelstahl - 269 - stainless steel