Berichte biomasse suisse · 2015. 10. 23. · - Anteil Hartkunststoffe 0,039 2,2 - Anteil Glas...

50
Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg Untersuchungsbefund Lfd. Nr. Probe 1 Produkt: Kompost Garten Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM Fremdstoffflächensumme cm 2 /l FM Fremdstoffe, gesamt 0,495 9,0 - Anteil Folien 0,040 5,6 - Anteil Hartkunststoffe 0,298 2,7 - Anteil Glas 0,157 0,7 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0 Links: Glas und Metall Rechts: Folien und Hartkunststoff Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm² Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015 21.10.2015 www.biomassesuisse.ch Seite 1 von 50

Transcript of Berichte biomasse suisse · 2015. 10. 23. · - Anteil Hartkunststoffe 0,039 2,2 - Anteil Glas...

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 1 Produkt: Kompost Garten

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,495 9,0 - Anteil Folien 0,040 5,6 - Anteil Hartkunststoffe 0,298 2,7 - Anteil Glas 0,157 0,7 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 1 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 2 Produkt: Kompost Garten

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,452 28,1 - Anteil Folien 0,043 25,4 - Anteil Hartkunststoffe 0,039 2,2 - Anteil Glas 0,066 0,5 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,304 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 2 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 3 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,332 21,4 - Anteil Folien 0,095 18,4 - Anteil Hartkunststoffe 0,169 2,9 - Anteil Glas 0,068 0,2 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 3 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 4 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,148 7,9 - Anteil Folien 0,019 6,5 - Anteil Hartkunststoffe 0,110 1,3 - Anteil Glas 0,019 0,1 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 4 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 5 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,021 3,9 - Anteil Folien 0,015 3,6 - Anteil Hartkunststoffe 0,006 0,3 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 5 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 6 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,083 5,2 - Anteil Folien 0,004 3,1 - Anteil Hartkunststoffe 0,079 2,1 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 6 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 7 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,045 2,1 - Anteil Folien 0,002 0,2 - Anteil Hartkunststoffe 0,044 1,9 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 7 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 8 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,055 3,2 - Anteil Folien 0,026 2,8 - Anteil Hartkunststoffe 0,019 0,3 - Anteil Glas 0,010 0,1 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 8 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 9 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,044 2,1 - Anteil Folien 0,005 1,6 - Anteil Hartkunststoffe 0,017 0,3 - Anteil Glas 0,022 0,2 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 9 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 10 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,072 5,4 - Anteil Folien 0,036 5,1 - Anteil Hartkunststoffe 0,030 0,2 - Anteil Glas 0,006 0,1 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 10 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 11 Produkt: Gärprodukt fest

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,088 8,6 - Anteil Folien 0,041 8,4 - Anteil Hartkunststoffe 0,007 0,1 - Anteil Glas 0,041 0,1 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 11 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 12 Produkt: Gärprodukt fest

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,108 23,1 - Anteil Folien 0,008 22,7 - Anteil Hartkunststoffe 0,100 0,4 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 12 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 13 Produkt: Gärprodukt fest

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,068 4,7 - Anteil Folien 0,028 4,2 - Anteil Hartkunststoffe 0,040 0,5 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 13 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 14 Produkt: Gärprodukt fest

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,437 5,1 - Anteil Folien 0,020 3,7 - Anteil Hartkunststoffe 0,099 0,6 - Anteil Glas 0,318 0,8 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 14 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 15 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,000 0,0 - Anteil Folien 0,000 0,0 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 15 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 16 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,012 1,1 - Anteil Folien 0,012 1,1 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 16 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 17 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,001 0,5 - Anteil Folien 0,001 0,5 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 17 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 18 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,003 0,5 - Anteil Folien 0,001 0,3 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,002 0,2

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 18 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 19 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,000 0,0 - Anteil Folien 0,000 0,0 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 19 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 20 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,000 0,0 - Anteil Folien 0,000 0,0 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 20 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 21 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,000 0,0 - Anteil Folien 0,000 0,0 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 21 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 22 Produkt: Hammermühle

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 1,515 33,5 - Anteil Folien 0,537 23,3 - Anteil Hartkunststoffe 0,978 10,2 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 22 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 23 Produkt: Hammermühle

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,103 10,0 - Anteil Folien 0,051 9,0 - Anteil Hartkunststoffe 0,036 0,4 - Anteil Glas 0,000 0,0 - Anteil Metall 0,016 0,6 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 23 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 24 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,200 7,6 - Anteil Folien 0,013 6,4 - Anteil Hartkunststoffe 0,010 0,7 - Anteil Glas 0,019 0,2 - Anteil Metall 0,158 0,3 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 24 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 25 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,008 0,2 - Anteil Folien 0,000 0,0 - Anteil Hartkunststoffe 0,003 0,1 - Anteil Glas 0,004 0,1 - Anteil Metall 0,001 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 25 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 26 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,778 4,3 - Anteil Folien 0,012 1,1 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,057 0,4 - Anteil Sonstige 0,709 2,8

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 26 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 27 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,138 22,8 - Anteil Folien 0,031 16,9 - Anteil Hartkunststoffe 0,093 4,4 - Anteil Glas 0,000 0,0 - Anteil Metall 0,014 1,5 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 27 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 28 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,154 8,0 - Anteil Folien 0,087 7,0 - Anteil Hartkunststoffe 0,038 0,8 - Anteil Glas 0,029 0,2 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 28 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 29 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,000 0,0 - Anteil Folien 0,000 0,0 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 29 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 30 Produkt: Kompost Landwirtschaft

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 1,253 3,3 - Anteil Folien 0,000 0,8 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,002 0,1 - Anteil Metall 1,251 2,4 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 30 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 31 Produkt: Kompost Garten

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,029 2,7 - Anteil Folien 0,003 2,3 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,015 0,2 - Anteil Metall 0,011 0,2 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 31 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 32 Produkt: Kompost Garten

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,008 1,2 - Anteil Folien 0,004 1,1 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,004 0,1 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 32 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D 37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 33 Produkt: Kompost Garten

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,001 0,6 - Anteil Folien 0,000 0,5 - Anteil Hartkunststoffe 0,000 0,1 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 33 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 34 Produkt: Kompost Garten

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,005 0,5 - Anteil Folien 0,003 0,0 - Anteil Hartkunststoffe 0,000 0,4 - Anteil Glas 0,002 0,1 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 34 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 35 Produkt: Kompost Garten

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,052 3,1 - Anteil Folien 0,006 2,6 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,046 0,5 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 35 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 36 Produkt: Gärprodukt fest

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,463 10,1 - Anteil Folien 0,035 6,8 - Anteil Hartkunststoffe 0,338 3,0 - Anteil Glas 0,090 0,3 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 36 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 37 Produkt: Gärprodukt fest

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,020 2,6 - Anteil Folien 0,009 2,5 - Anteil Hartkunststoffe 0,011 0,1 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 37 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 38 Produkt: Gärprodukt fest

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,100 6,4 - Anteil Folien 0,031 6,2 - Anteil Hartkunststoffe 0,069 0,2 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 38 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 39 Produkt: Gärprodukt fest

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,076 6,8 - Anteil Folien 0,040 6,5 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,036 0,3 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 39 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 40 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,000 0,0 - Anteil Folien 0,000 0,0 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 40 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 41 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,000 0,0 - Anteil Folien 0,000 0,0 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 41 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 42 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,000 0,0 - Anteil Folien 0,000 0,0 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 42 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 43 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,026 1,9 - Anteil Folien 0,021 1,8 - Anteil Hartkunststoffe 0,005 0,1 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 43 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 44 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,000 0,0 - Anteil Folien 0,000 0,0 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 44 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 45 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,015 1,3 - Anteil Folien 0,003 1,1 - Anteil Hartkunststoffe 0,012 0,2 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 45 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 46 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,001 0,4 - Anteil Folien 0,001 0,4 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 46 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 47 Produkt: Gärprodukt flüssig

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,000 0,0 - Anteil Folien 0,000 0,0 - Anteil Hartkunststoffe 0,000 0,0 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 47 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 48 Produkt: Hammermühle

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,388 14,4 - Anteil Folien 0,044 8,1 - Anteil Hartkunststoffe 0,299 5,8 - Anteil Glas 0,042 0,3 - Anteil Metall 0,004 0,2 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 48 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 49 Produkt: Hammermühle

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,254 14,0 - Anteil Folien 0,040 8,3 - Anteil Hartkunststoffe 0,214 5,7 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 49 von 50

  • Prüflabor: INFU mbH Geschäftsbereich PLANCO-TEC, Kohlenstraße 8 D-37249 Neu Eichenberg

    Untersuchungsbefund

    Lfd. Nr. Probe 50 Produkt: Hammermühle

    Bestimmung des Fremdstoffgehaltes und der Fremdstoffflächensumme

    Fremdstofffraktion >2mm Fremdstoffgehalt Gew.-% d. TM

    Fremdstoffflächensummecm2/l FM

    Fremdstoffe, gesamt 0,265 15,1 - Anteil Folien 0,045 8,0 - Anteil Hartkunststoffe 0,220 7,1 - Anteil Glas 0,000 0,0 - Anteil Metall 0,000 0,0 - Anteil Sonstige 0,000 0,0

    Links: Glas und Metall Rechts: Folien und Hartkunststoff

    Abbildung: Visuelle Darstellung der Fremdstoffe in 1 l Untersuchungsprobe Maßstab: 1 cm² entspricht 0,8 cm²

    Analysenkampagne Biomasse Suisse: Ermittlung von Fremdstoffen 50 Proben erhoben 09/2015

    21.10.2015 www.biomassesuisse.ch Seite 50 von 50