Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für...

219
Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok för lackering av personbilar Håndbok for reparasjonslakkering av personbiler Manual para la reparación del pintado de turismos Manual de repintura para automóveis de passageiros Reparatierichtlijnen laksystemen voor personenwagens Guide pour la réparation des peintures des voitures particulières

Transcript of Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für...

Page 1: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Car Refinishing Manual VOC

Reparaturleitfaden für PKW-Lackierungen

Manuale per la riverniciatura di autovetture

Reparationshandbok för lackering av personbilar

Håndbok for reparasjonslakkering av personbiler

Manual para la reparación del pintado de turismos

Manual de repintura para automóveis de passageiros

Reparatierichtlijnen laksystemen voor personenwagens

Guide pour la réparation des peintures des voitures particulières

Page 2: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationContents VOC

03/2020

Contents

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

A General Information Edition

Notes on the manual A 1 10/2011

Use of matrices A 2 10/2011

Paint shop operations A 3 10/2011

B Matrices Edition

Pre-treatment of substrates and old paintwork B 1 11/2011

Metallic substrates - body fillers B 2 03/2014

Metallic substrates – undercoats B 3 01/2018

Coating of plastics - undercoats B 4 07/2016

Primer / primer filler / surfacer combinations B 5 04/2014

Sanding of undercoats B 6 07/2016

Primer filler / surfacer / topcoat combinations B 7 11/2017

Hardeners / activators for undercoats B 8 04/2014

Hardeners for topcoats / clears B 9 11/2017

C Glasurit® RATIO Systems Edition

Glasurit® RATIO Aqua RATIO Aqua 01/2015

Glasurit® RATIO HS RATIO HS 11/2017

D Refinishing Systems Edition

Spray Filler System 1006-26 Glasurit® UP-Spray Fillergrey

S 1 03/2018

Painting of Plastics on Cars S 3 10/2011

Painting of Plastics on Cars S 3a 08/2019

Painting of Factory-Primed Plastic Parts S 3b 12/2013

Painting of Plastics on Cars S 3c 11/2018

Economical Repair System S 4 04/2014

Repair System for new e-coated parts S 4a 10/2011

Blend-in Refinishing System 22 Line Glasurit® HS 2KTopcoat VOC

S 7a 06/2018

Blend-in Refinishing System 22 Line Glasurit® HS 2KTopcoat VOC MC600

S 7b 06/2018

Page 3: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationContents VOC

03/2020

Contents

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Blending in on the panel being repaired with Glasurit®90 Line Basecoat

S 9 01/2012

Blending in on the adjacent panel with Glasurit® 90 LineBasecoat

S 9.1 11/2016

Blend-in Repair System 90 Line Glasurit® Pearl EffectBasecoat

S 9.2 01/2016

Glasurit® - Spot Repair Process S 9.5 01/2016

Blending in on the adjacent panel with Glasurit® 90 Linetri-coat colors (translucent step 2)

S 9.6 05/2019

Refinishing with Low-Solvent Products Glasurit® VOCRefinishing Process

S 10 11/2017

Glasurit® Mat Clear System S 12 01/2015

Glasurit® Mat Clear System / modified S 12a 11/2018

Glasurit® PRO Active repair process S 13 11/2017

Paint system with 1K UV primer filler for repairs onplastic parts

S 15 09/2019

Paint system with 1K UV primer filler for repairs onmetal parts

S 15a 09/2019

E Glasurit® RATIO Color Edition

Glasurit® Paint Mixing System E 1 10/2011

Glasurit® RATIO Color System E 2 10/2011

Tips for colour matching E 4 10/2011

F Important Information / Tables Edition

Product list F 1 11/2017

Temperature table F 2 11/2017

Survey of processing pictographs F 3 11/2013

Infrared drying F 4 11/2017

Advice on the use of HVLP sprayguns F 5 10/2011

G Contents Product Information Edition

G / BF Body Fillers Edition

G / P Primers Edition

G / PF Primer Fillers Edition

Page 4: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationContents VOC

03/2020

Contents

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

G / F Fillers Edition

G / T Topcoats Edition

G / C Clears Edition

G / X Miscellaneous Edition

G / Z Additives Edition

Page 5: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationProducts VOC

03/2020

ContentsProduct Information

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Body Fillers G / BF Edition

Glasurit® Multi Purpose Body Filler 839-20/20K 05/2014

Glasurit® Fine Body Filler 839-25 10/2011

Glasurit® Soft-Body Filler 839-55 03/2014

Glasurit® Universal Body Filler 839-70/70K 10/2011

Glasurit® Multi Brushing Body Filler 839-85 07/2015

Glasurit® Body Filler 839-88 05/2014

Glasurit® Plastic Body Filler 839-90 10/2011

Glasurit® UV Body Filler 839-171 11/2019

Glasurit® Glass fibre body filler 901-21 10/2011

Glasurit® UP-Spray Filler grey 1006-26 08/2016

Primers G / P Edition

Glasurit® 1K Anti-corrosive Primer 183-30 08/2019

Glasurit® Etch Primer Filler 283-150 12/2016

Glasurit® 2K SF Primer 285-26 02/2016

Glasurit® 1K Plastic Adhesion Primer 934-10 08/2019

Primer Fillers G / PF Edition

Glasurit® UV Primer filler, light grey 151-130 09/2019

Glasurit® UV Primer filler grey 151-170 08/2018

Glasurit® UV Primer filler grey aerosol can 151-170 AE 08/2019

Glasurit® UV Primer filler, dark grey 151-190 09/2019

Glasurit® 1K Primer Filler 176-72 08/2016

Glasurit® 1K Express Primer Filler light grey 183-70 08/2019

Glasurit® 1K Express Primer Filler dark grey 183-90 08/2019

Glasurit® Etch Primer Filler 283-150 12/2016

Glasurit® Primer Filler Pro, white 285-230 04/2019

Glasurit® Primer Filler Pro, grey 285-270 04/2019

Glasurit® Primer Filler Pro, black 285-290 04/2019

Glasurit® HS Primer Filler, grey 285-505 11/2018

Glasurit® HS Primer Filler, black 285-555 11/2018

Glasurit® HS Primer Filler, white 285-655 11/2018

Glasurit® Primer Filler 285-700 02/2016

Glasurit® Primer Filler, white 285-730 02/2016

Glasurit® Primer Filler, black 285-790 02/2016

Glasurit® Epoxy Primer Filler grey 801-72 02/2016

Glasurit® 2K Plastic Primer Filler 934-70 02/2016

Page 6: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationProducts VOC

03/2020

ContentsProduct Information

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Fillers G / F Edition

Glasurit® 1K Filler 185-66 08/2019

Glasurit® HS Transparent Sealer 285-0 02/2016

Glasurit® HS VOC Non-Sanding Filler, light grey 285-31 02/2016

Glasurit® HS VOC Non-Sanding Filler, white 285-38 02/2016

Glasurit® HS VOC Non-Sanding Filler, black 285-49 02/2016

Glasurit® HS VOC Tintable Filler, transparent 285-95 02/2016

Glasurit® Filler VOC grey 285-888 01/2015

Topcoats G / T Edition

22 Line Glasurit® HS 2K Topcoat VOC 22- VOC 04/2016

22 Line Glasurit® HS 2K Topcoat VOC MC600 22- VOC MC600 05/2018

Glasurit® 22 Line HS 2K Topcoat, mat, Glasurit® 22 Line HS 2KTopcoat 22-1250-M

22- matt 11/2017

90 Line Glasurit® Basecoat 90- 05/2017

Glasurit® Basecoat 90- Limited Edition 90- Magic Collection 90- 10/2011

90 Line Glasurit® Basecoat mixed tinters 90- Mixed tinters 10/2019

90 Line Glasurit® Basecoat factory pack 90- Factory- pack 10/2019

Blend-in Technique with Glasurit® 90-905 Alusilber 90-905 03/2013

Edge-to-edge repair with Glasurit® 90-905 Alusilber 90-905 03/2013

Glasurit® 90 Line Additive for basecoat 93-IC 330 01/2015

Glasurit® 90 Interior Color System Metallics/Solids/Pearl Effects 90-IC 440 03/2017

Clears G / C Edition

Glasurit® HS Clear VOC 923-35 10/2011

Glasurit® HS Clear scratch resistant VOC 923-45 10/2011

Glasurit® MS Extra Matt Clear 923-55 08/2018

Glasurit® MS Clear matt Flexible 923-57 08/2018

Glasurit® MS Clear matt Flexible 923-58 08/2018

Glasurit® HS Universal Clear VOC 923-115 10/2011

Glasurit® HS Racing Clear VOC 923-135 10/2011

Glasurit® HS Multi Clear VOC 923-335 10/2011

Glasurit® HS Clear scratch-resistant VOC 923-447 10/2011

Glasurit® HS Clear fast-drying VOC 923-610 09/2019

Glasurit® HS Clear universal VOC 923-625 09/2019

Glasurit® HS Clear superior gloss VOC 923-630 09/2019

Glasurit® HS clear coat superior gloss 923-631 03/2020

Glasurit® HS Clear scratch-resistant VOC 923-645 08/2015

Glasurit® Clear VOC 923-666 01/2015

Glasurit® HS Clear ultra scratch-resistant VOC 925-2002 10/2011

Miscellaneous G / X Edition

Page 7: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationProducts VOC

03/2020

ContentsProduct Information

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Glasurit® Tri-coat Additive 90-M5 10/2011

Glasurit® Blending Clear 90-M50 10/2011

Glasurit® Guide Coat black 581-90 08/2019

Glasurit® Cleaner 700-1 10/2011

Glasurit® Degreasing and cleansing agent 700-10 10/2011

Glasurit® Coagulating powder 700-7 10/2011

Glasurit® Stone chip and underbody protection 1109- 10/2011

Glasurit® Blend-in Reducer 352-450 10/2011

Glasurit® Spot-Blender 352-500 10/2011

Glasurit® Spot-Blender - aerosol can 352-500 AE 08/2019

Glasurit® PRO Active Wipes 360-100 08/2015

Additives G / Z Edition

Glasurit® plastic additive 522-10 01/2015

Glasurit® Air-Drying Primer Filler Additive 522-55 03/2018

Glasurit® Brush- and Roll Additive 522-78 03/2019

Glasurit® Soft face Additive 522-111 11/2017

Glasurit® HS Flexible Matting agent 522-322 09/2018

Glasurit® Texture additive Fine 522-345 09/2018

Glasurit® Racing Additive 523-15 11/2017

Glasurit® Air-Drying Additive 523-65 12/2015

Glasurit® Anti-silicone additive 580-100 11/2017

Glasurit® Hardener 929- 10/2011

Glasurit® HS Topcoat Hardener / HS Filler Hardener 929- HS 10/2011

Glasurit® Hardener VOC 929- VOC 03/2018

Page 8: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationA 1

10/2011

Notes on the manual

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

The aim of this manual is to provide a survey of vehicle refinishing. Glasurit offers a comprehensive range ofproducts for the repair trade which allows bodyshops to select the ideal refinishing process by choosing fastor slow hardeners, thinners and additives. Only by the selection of and specialisation in certain materials andprocedures can efficient and economic paint jobs be achieved. What is most important for a good result is to stick to the recommended application data in respect of mixingratios, film thickness, viscosity and drying time etc. For all the products mentioned in the individual refinishing processes, we have enclosed, in section >G<,technical data sheets (sub-divided in product groups) in which you will find the application data needed andother useful information. Please note in particular the details on faster and slower thinners and hardeners whichallow you to tailor the chosen product to the working conditions in your own shop. The amount of labour involved in a paint job depends on the condition of the old paintwork and the customer’sdemands. A high quality refinishing job, for example on a virtually new car, must result in a very good finish quality, whichmeans that comprehensive body-filling and priming work with careful fine sanding will be required. Water-based refinishing, which allows to achieve the same quality level as solvent-based paint materials, involvesthe use of appropriate water-based products.The most important advantage of this environmentally acceptable process is that solvent consumption can bereduced by up to 80% compared to solvent-based refinishing systems.The recommended refinishing processes are detailed in section >C< (RATIO-AQUA) or >D< (S10). An “economical repair/respray” is a time-saving and economical process in which the amount of labour involvedshould just meet the customer’s demands as regards the appearance of the refinished areas. This is theprocess recommended for older vehicles.The recommended refinishing processes are detailed in section >D<(S4). In plastics refinishing, the paint materials to be used must be specially adjusted to the properties, for example theelasticity, of the plastics to be refinished.The recommended refinishing processes are detailed in section >D< (S3). The blending-in technique detailed in section >D< (S7a - S9.2) is necessary or recommended when the refinishingof a part (panel repair) would result in a visible colour difference. Blending in is usually less time-consuming andless expensive than colour matching.

Page 9: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationA 2

10/2011

Use of matrices

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Section B provides basic information and answers to crucial questions in matrix-shape. • B 1 Pre-treatment of substrates and old paintwork How do you clean and sand the different substrates?

• B 2 Metallic substrates – body fillers Which body fillers can be used for which metallic substrates?

•B 3 Metallic substrates – undercoats Which primers and/or primer fillers can be used for which metallic substrates?

• B 4 Coating of plastics – undercoats Which undercoat materials can be applied to which plastics?

• B 5 Primer / primer filler / surfacer combinations Which primer fillers or fillers can be used over which primers?

• B 6 Sanding of undercoats Which sanding techniques and pads can be used for the different undercoat materials?

• B 7 Primer filler / surfacer / topcoat combinations Which topcoats can be applied to which primer fillers or fillers?

• B 8 Hardeners / activators for undercoats Which hardeners or activators are needed for which undercoat materials?

• B 9 Hardeners for topcoats / clears Which hardeners can be used for which topcoats or clears?

Page 10: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationA 3

10/2011

Paint shop operations

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

The appearance of a finish depends not only on the paint materials and how they are processed but also onthe condition of the spraying and drying booths and that of the other equipment. Paints should be applied atan ambient temperature of between 18°C and 25°C (64-77°F). The air used for spraying must be free of oiland water (check the oil separator daily). The spraying pressure must be constant. The choice of the correctnozzle and the cleanliness of both the nozzles and the air caps are also important since there will not be aneven spraying pattern otherwise. Spraying and drying booths are kept free of dust mainly by means of an efficiently functioning ventilation system,which is also necessary for safety reasons, in order to avoid build-ups of explosive mixtures of solvent vapourand air. The result of a repair job depends not only on the spraying technique, but to a great extent on a properventilation system. The volume of air needed in a spray booth is approx. 20,000 m³/hour (700,000 cu.ft/hour).The air used for spraying should not be drawn from the workshop because this would require a higher level ofdust filtering. The air drawn in from outside must be filtered and warmed. This applies particularly in the colder seasons andespecially in the case of combi-booths, i.e. spray booths that also serve as drying booths. The amount of air to be drawn in depends on the size of the spray booth and is also directly related to theamount of air extracted. In all cases, however, enough air must be drawn in for the pressure in the spray boothto be higher than the pressure outside. A ratio of exhaust air to incoming air of approx. 1:1.05 is sufficient. Negative pressure inside the booth will inevitably lead to defects in fresh finishes because the air coming in fromoutside around doors and through other openings carries dirt particles that will contaminate fresh paintwork.This is why overpressure in the spray booth, combined with efficient filters in the ventilation system, play aparticularly important part for a flawless finish. The above does not apply in the UK, where pressure in the spraybooth is required to be lower than the pressure outside the booth. If there is a drying oven connected to thespray booth, pressure in the oven must be higher than that in the booth in order to prevent contamination of theobjects being dried by overspray from the spray booth, for example. The filters used must of course be adapted to this purpose and kept clean at all times. The fine filters shouldremove at least 99.8% of the dust contained in the air being filtered. It is particularly important that the incomingair be directed through a suitable system of distributors that can prevent the creation of excessively strong aircurrents. Such air currents would not only inconvenience the spray-painter, but also form vortexes that retain thepaint dust longer. This paint dust would then gradually be deposited on the freshly painted surface and spoil it. The air speed should not be too high either since the paint applied would then dry too quickly on the surface.The result would be poor flow and also the formation of specks due to insufficient overspray absorption.Furthermore, if the surface dries too rapidly, this can lead to loss of gloss and wrinkling. Wherever possible, theincoming air ducts or distributors should be spread over the whole ceiling area. An air speed of 0.3 m/sec (which means that the air is renewed approximately 350 times per hour), measuredright across the spray booth, is generally sufficient.

Page 11: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationA 3

10/2011

Paint shop operations

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

The air is best extracted via outlet ducts down near the floor of the spray booth (separation by means offiltering). Employee safety and operating regulations Finally it should be noted that installations of this kind must be designed, set up and operated in accordancewith the applicable rules on the prevention of accidents, in Germany in accordance with BGV D24 and D25. The storage of paints, solvents and thinners is subject to the regulations concerning flammable liquids. Applicable MAC values (maximum allowable concentrations of substances that are hazardous to health) mustbe observed in all work areas. Noise pollution from the equipment used can be avoided if all machines and toolscomply with the maximum levels laid down in the accident prevention regulations concerning noise (in Germany,BGV B3). Remark: All nationally and/or locally applicable working directions, operating instructions and safety regulations as well asexisting rules for the prevention of accidents and regulations on dangerous substances must be observed. The laws and regulations referred to in this manual are applicable to the Federal Republic of Germany only.

Page 12: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 1

11/2011

Pre-treatment of substrates and old paintwork

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Metallic Substrates

Sheet steel

360-4Glasurit® Metalcleaner

1 x wipe dry P80-P150

360-4Glasurit® Metalcleaner

1 x wipe dry

Galvanisedsteel

360-4Glasurit® Metalcleaner

1 x wipe dry sandingpad

360-4Glasurit® Metalcleaner

1 x wipe dry

Aluminium

360-4Glasurit® Metalcleaner

1 x wipe dry P150-P180

360-4Glasurit® Metalcleaner

1 x wipe dry

Plastics

Plastics

541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry damaged

area:P80-P600entire part:

sandingpad

541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry

Plastics PUfoam andpolyamide(PA)

Heating toremove mouldrelease agents

and water 60 °C1 hour

541-30Glasurit®Universal cleanerfor plastics 1x

moistenedcloth

damagedarea:

P80-P600entire part:

sandingpad

541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry

GRP/SMC

541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry P180-

P240

541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry

Page 13: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 1

11/2011

Pre-treatment of substrates and old paintwork

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Old paintwork / new panels

New panelsfactory-primed

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry sanding

pad orP240-P320

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry

Old paintwork

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry sanding

pad orP240-P320

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry

Old paintworksolvent-sensitive

700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry sanding

pad orP240-P320

P320-P400fade-

out area

700-1Glasurit® Cleaner

1 x wipe dry

Page 14: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 2

03/2014

Metallic substrates - body fillersProduct recommendations for car refinishing only

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Body Fillers Sheet steel Galvanisedsheet steel

Aluminium /Magnesium

OEM partswith e-coat

Old paintwork

839-20/20K Glasurit® Multi PurposeBody Filler

839-25 Glasurit® Fine Body Filler

839-55 Glasurit® Soft-Body Filler

839-70/70K Glasurit® Universal BodyFiller

839-85 Glasurit® Multi BrushingBody Filler

901-21 Glasurit® Glass fibre bodyfiller

1006-26 Glasurit® UP-Spray Fillergrey

S1 S1 S1

not applicable

direct application possible

S 1 cf. refinishing process S 1

Page 15: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 3

01/2018

Metallic substrates – undercoatsProduct recommendations for car refinishing only

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Primers Sheet steel Galvanisedsheet steel

Aluminium/magnesium

OEM partswith e-coat

Old paintwork

283-150 Glasurit® Etch Primer Filler

Primer Fillers Sheet steel Galvanisedsheet steel

Aluminium/magnesium

OEM partswith e-coat

Old paintwork

151-170 Glasurit® UV Primer fillergrey

 

176-72 Glasurit® 1K Primer Filler 2 2 2 2 2

283-150 Glasurit® Etch Primer Filler

285-230 Glasurit® Primer Filler Pro,white

285-270 Glasurit® Primer Filler Pro,grey

285-290 Glasurit® Primer Filler Pro,black

285-505 Glasurit® HS Primer Filler,grey

1 1 1 1 1

285-555 Glasurit® HS Primer Filler,black

1 1 1 1 1

285-655 Glasurit® HS Primer Filler,white

1 1 1 1 1

285-700 Glasurit® Primer Filler 1 1 1 1 1

285-730 Glasurit® Primer Filler, white 1 1 1 1 1

285-790 Glasurit® Primer Filler, black 1 1 1 1 1

801-72 Glasurit® Epoxy Primer Fillergrey

Page 16: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 3

01/2018

Metallic substrates – undercoatsProduct recommendations for car refinishing only

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Fillers and Surfacers Sheet steel Galvanisedsheet steel

Aluminium/magnesium

OEM partswith e-coat

Old paintwork

285-0 Glasurit® HS TransparentSealer

     1 1

285-31 Glasurit® HS VOC Non-Sanding Filler, light grey

1 1 1 1 1

285-38 Glasurit® HS VOC Non-Sanding Filler, white

1 1 1 1 1

285-49 Glasurit® HS VOC Non-Sanding Filler, black

1 1 1 1 1

285-95 Glasurit® HS VOC TintableFiller, transparent

1 1 1 1 1

not applicable

can be applied directly, even on bare metal substrates

prime larger sand-throughs / bare metal substrates with: Glasurit® 285-270 Primer Filler Pro grey or Glasurit® 283-150 EtchPrimer Filler

prime larger sand-throughs / bare metal substrates with: Glasurit® 801-72 Epoxy Primer Filler grey

Page 17: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 4

07/2016

Coating of plastics - undercoatsProduct recommendations for car refinishing only

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Body Fillers PU-RIM PP-EPDM ABS GRP/SMC PC-PBTP PA PPO rigid PVC

839-90 Glasurit® Plastic Body Filler

839-20/20K Glasurit® Multi PurposeBody Filler

             

1006-26 Glasurit® UP-Spray Fillergrey

             

Primer PUR- RIM

PP-EPDM ABS GRP/SMC PC-PBTP PA PPO rigid PVC

934-10 Glasurit® 1K PlasticAdhesion Primer

1 1 1 

1 1 1 1

Primer Fillers PUR- RIM

PP-EPDM ABS GRP/SMC PC-PBTP PA PPO rigid PVC

151-170 Glasurit® UV Primer fillergrey

4 4 4 4 4 4 4

285-230 Glasurit® Primer Filler Pro,white

3 3 3 3 3 3 3 3

285-270 Glasurit® Primer Filler Pro,grey

3 3 3 3 3 3 3 3

285-290 Glasurit® Primer Filler Pro,black

3 3 3 3 3 3 3 3

285-505 Glasurit® HS Primer Filler,grey

2 2 2 2 2 2 2

285-555 Glasurit® HS Primer Filler,black

2 2 2 2 2 2 2

285-655 Glasurit® HS Primer Filler,white

2 2 2 2 2 2 2

285-700 Glasurit® Primer Filler 2 2 2 2 2 2 2

285-730 Glasurit® Primer Filler, white 2 2 2 2 2 2 2

285-790 Glasurit® Primer Filler, black 2 2 2 2 2 2 2

Page 18: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 4

07/2016

Coating of plastics - undercoatsProduct recommendations for car refinishing only

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Fillers and Surfacers PUR- RIM

PP-EPDM ABS GRP/SMC PC-PBTP PA PPO rigid PVC

285-0 Glasurit® HS TransparentSealer

3 3 3 3 3 3 3

285-31 Glasurit® HS VOC Non-Sanding Filler, light grey

3 3 3 3 3 3 3

285-38 Glasurit® HS VOC Non-Sanding Filler, white

3 3 3 3 3 3 3

285-49 Glasurit® HS VOC Non-Sanding Filler, black

3 3 3 3 3 3 3

285-95 Glasurit® HS VOC TintableFiller, transparent

3 3 3 3 3 3 3

not applicable

priming coat not required

application in paint system only – cf. refinishing process S3a

add 25% of Glasurit® 522-111 Softface Additive application in paint system only – cf. refinishing process S3a

By addition of Glasurit® 522-10 plastic additive – cf. refinishing process S 3 or Technical Data Sheets 285-230, -270, -290

application in paint system only – cf. refinishing process S 15

Page 19: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 5

04/2014

Primer / primer filler / surfacer combinations

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

283-150 Primer 801-72 Primer 285-270 Primer

176-72 Glasurit® 1K Primer Filler    

285-505 Glasurit® HS Primer Filler,grey

285-555 Glasurit® HS Primer Filler,black

285-655 Glasurit® HS Primer Filler,white

285-700 Glasurit® Primer Filler

285-730 Glasurit® Primer Filler, white

285-790 Glasurit® Primer Filler, black

283-150 Primer 801-72 Primer 285-270 Primer

285-0 Glasurit® HS TransparentSealer

285-31 Glasurit® HS VOC Non-Sanding Filler, light grey

285-38 Glasurit® HS VOC Non-Sanding Filler, white

285-49 Glasurit® HS VOC Non-Sanding Filler, black

285-95 Glasurit® HS VOC TintableFiller, transparent

not applicable

possible primer / primer filler / surfacer combinations

Page 20: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 6

07/2016

Sanding of undercoats

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Body Fillers Coarsesanding

with orbitalsander

Fine sandingwith orbital

sander

Manualsanding, wet

839-20/20K Glasurit® Multi PurposeBody Filler

P80 / P150 P240  

839-25 Glasurit® Fine Body Filler P80 / P150 P240  

839-55 Glasurit® Soft-Body Filler P80 / P150    

839-70/70K Glasurit® Universal BodyFiller

P80 / P150 P240  

839-85 Glasurit® Multi BrushingBody Filler

P80 / P150 P240  

839-90 Glasurit® Plastic Body Filler P80 / P150 P240 / P320  

901-21 Glasurit® Glass fibre bodyfiller

P80 / P150    

1006-26 Glasurit® UP-Spray Fillergrey

P150 P240  

Page 21: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 6

07/2016

Sanding of undercoats

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Primer Fillers Coarsesanding

with orbitalsander

Fine sandingwith orbital

sander

Manualsanding, wet

151-170 Glasurit® UV Primer fillergrey

  P400 - P500 P800

176-72 Glasurit® 1K Primer Filler   P400 - P500 P800

283-150 Glasurit® Etch Primer Filler     P800

285-230 Glasurit® Primer Filler Pro,white

  P400 - P500 P800

285-270 Glasurit® Primer Filler Pro,grey

  P400 - P500 P800

285-290 Glasurit® Primer Filler Pro,black

  P400 - P500 P800

285-505 Glasurit® HS Primer Filler,grey

  P400 - P500 P800

285-555 Glasurit® HS Primer Filler,black

  P400 - P500 P800

285-655 Glasurit® HS Primer Filler,white

  P400 - P500 P800

285-700 Glasurit® Primer Filler   P400 - P500 P800

285-730 Glasurit® Primer Filler, white   P400 - P500 P800

285-790 Glasurit® Primer Filler, black   P400 - P500 P800

801-72 Glasurit® Epoxy Primer Fillergrey

  P400 - P500 P800

Fillers and Surfacers Coarsesanding

with orbitalsander

Fine sandingwith orbital

sander

Manualsanding, wet

285-95 Glasurit® HS VOC TintableFiller, transparent

  P400 - P500 P800

Page 22: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 7

11/2017

Primer filler / surfacer / topcoat combinations

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Primer Fillers 22 VOC 22 VOC MC600 90

151-170 Glasurit® UV Primer fillergrey

176-72 Glasurit® 1K Primer Filler

283-150 Glasurit® Etch Primer Filler  

285-230 Glasurit® Primer Filler Pro,white

285-270 Glasurit® Primer Filler Pro,grey

285-290 Glasurit® Primer Filler Pro,black

285-505 Glasurit® HS Primer Filler,grey

285-555 Glasurit® HS Primer Filler,black

285-655 Glasurit® HS Primer Filler,white

285-700 Glasurit® Primer Filler

285-730 Glasurit® Primer Filler, white

285-790 Glasurit® Primer Filler, black

801-72 Glasurit® Epoxy Primer Fillergrey

934-70 Glasurit® 2K Plastic PrimerFiller

Page 23: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 7

11/2017

Primer filler / surfacer / topcoat combinations

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Fillers and Surfacers 22 VOC 22 VOC MC600 90

285-0 Glasurit® HS TransparentSealer

285-31 Glasurit® HS VOC Non-Sanding Filler, light grey

285-38 Glasurit® HS VOC Non-Sanding Filler, white

285-49 Glasurit® HS VOC Non-Sanding Filler, black

285-95 Glasurit® HS VOC TintableFiller, transparent

not applicable

possible primer filler / surfacer / topcoat combinations

Page 24: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 8

04/2014

Hardeners / activators for undercoats

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Body Fillers 948-22 948-36 / -52

839-20/20K Glasurit® Multi PurposeBody Filler

 

839-25 Glasurit® Fine Body Filler  

839-55 Glasurit® Soft-Body Filler  

839-70/70K Glasurit® Universal BodyFiller

 

839-85 Glasurit® Multi BrushingBody Filler

 

839-90 Glasurit® Plastic Body Filler  

901-21 Glasurit® Glass fibre bodyfiller

 

1006-26 Glasurit® UP-Spray Fillergrey

 

Primers 352-230 929-26

283-150 Glasurit® Etch Primer Filler  

285-26 Glasurit® 2K SF Primer  

Page 25: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 8

04/2014

Hardeners / activators for undercoats

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Primer Fillers 352-228 929-55 929-56 929-58 965-60 93-E3

283-150 Glasurit® Etch Primer Filler          

285-230 Glasurit® Primer Filler Pro,white

         

285-270 Glasurit® Primer Filler Pro,grey

         

285-290 Glasurit® Primer Filler Pro,black

         

285-505 Glasurit® HS Primer Filler,grey

 1

     

285-555 Glasurit® HS Primer Filler,black

 1

   

285-655 Glasurit® HS Primer Filler,white

 1

     

285-700 Glasurit® Primer Filler  1

     

285-730 Glasurit® Primer Filler, white  1

     

285-790 Glasurit® Primer Filler, black  1

     

801-72 Glasurit® Epoxy Primer Fillergrey

         

934-70 Glasurit® 2K Plastic PrimerFiller

         

176-72 Glasurit® 1K Primer Filler          

Page 26: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 8

04/2014

Hardeners / activators for undercoats

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Fillers and Surfacers 929-55 929-56

285-0 Glasurit® HS TransparentSealer

2

285-31 Glasurit® HS VOC Non-Sanding Filler, light grey

2

285-38 Glasurit® HS VOC Non-Sanding Filler, white

2

285-49 Glasurit® HS VOC Non-Sanding Filler, black

2

285-95 Glasurit® HS VOC TintableFiller, transparent

not applicable

possible undercoat / hardener or activator combinations

for large areas and rather high application temperatures

for small areas and rather low application temperatures

Page 27: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 9

11/2017

Hardeners for topcoats / clears

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Topcoats 929-91 929-93 929-94 929-31 929-33 929-34 929-61 929-63 929-64

22- VOC 22 Line Glasurit® HS 2KTopcoat VOC

           

22- VOCMC600

22 Line Glasurit® HS 2KTopcoat VOC MC600

           

Clears 929-91 929-93 929-94 929-31 929-33 929-34 929-97

923-35 Glasurit® HS Clear VOC        

923-45 Glasurit® HS Clear scratchresistant VOC

       

923-55 Glasurit® MS Extra MattClear

1 1 

1 1 1

923-58 Glasurit® MS Clear mattFlexible

1 1 1 1 1 1

923-115 Glasurit® HS Universal ClearVOC

       

923-135 Glasurit® HS Racing ClearVOC

         

923-335 Glasurit® HS Multi ClearVOC

       

923-447 Glasurit® HS Clear scratch-resistant VOC

       

Clears 929-61 929-63 929-64

923-610 Glasurit® HS Clear fast-drying VOC

923-625 Glasurit® HS Clear universalVOC

923-630 Glasurit® HS Clear superiorgloss VOC

923-645 Glasurit® HS Clear scratch-resistant VOC

Page 28: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationB 9

11/2017

Hardeners for topcoats / clears

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

not applicable

possible topcoat or clear / hardener combinations

Note: Changing mixing ratio

Page 29: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationRATIO Aqua

01/2015

Glasurit® RATIO Aqua

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: 90 Line repair process for a fast, economical quality finish in compliance with international VOC legislation.

Cleaning

700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry

Mechanicalde-rusting of

damaged areasP16-P150

700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry

Body Filler(coarse +fine)

839-20 / 20KGlasurit® MultiPurpose BodyFiller

948-36Glasurit®Hardener Paste

+ 2-3% 20-30min. at20°C

4 min. P80/P150coarsesanding

P240/P320 finesanding

700-1Glasurit® Cleaner

1 x wipe dry

Primer

283-150Glasurit® EtchPrimer Filler

352-230Glasurit®Activator

1:1mixingstick

HVLP1.3-1.7

mm2.0-3.0 bar

1 thin coat10-15 µm

10-15 min.at 20°C

Primer Filler

285-505, -555,-655Glasurit® HSPrimer Filler

929-55, -56Glasurit® HSPrimer Hardener

352-Glasurit®Reducer

4:1:1mixingstick

HVLP1.7-1.9

mm2.0-3.0 bar

250-70 µm

20 min.at 60°C

P400- P500

700-11x

wipe dry

or alternatively: Glasurit® Primer Filler 285-700 /-730 /-790

Basecoat

90 Line Glasurit®Basecoat

93-E3Glasurit®Adjusting base

2:1mixingstick

HVLP1.3 mm

2.0-3.0 bar

2 + 1/2spraycoats

flash offuntil mattbetween

spraycoatsand before

clear

Clear

923-335Glasurit® HSMulti Clear VOC

929-Glasurit®Hardener VOC

352-Glasurit®Reducer

2:1+10%mixingstick

HVLP1.3 mm

2.0-3.0 bar

2spraycoats

30 min. at60 °C

Page 30: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationRATIO HS

11/2017

Glasurit® RATIO HS

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: Solvent-borne repair process for a fast, economical quality finish with 22 Line HS 2K Topcoat.

Cleaning

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry

Mechanicalde-rusting of

damaged areasP16-P150

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry

Body Filler(coarse +fine)

839-20 / 20KGlasurit® MultiPurpose BodyFiller

948-36Glasurit®Hardener Paste

+ 2-3% 20-30min. at20°C

4 min. P80/P150coarsesanding

581-90Glasurit® GuideCoat black

P240/P320 finesanding

700-11x

wipe dry

Primer

283-150Glasurit® EtchPrimer Filler

352-230Glasurit®Activator

1:1mixingstick

HVLP1.3-1.7

mm2.0-3.0 bar

1 thin coat10-15 µm

10 min.at 20°C

Primer Filler

285-505, -555,-655Glasurit® HSPrimer Filler

929-55, -56Glasurit® HSPrimer Hardener

352-Glasurit®Reducer

4:1:1mixingstick

HVLP1.7-1.9

mm2.0-3.0 bar

250-70 µm

20 min.at 60°C

P400- P500

700-11x

wipe dry

or alternatively: Glasurit® Primer Filler 285-700 /-730 /-790

Topcoat

22 Line Glasurit®HS 2K TopcoatVOC

929-Glasurit®Hardener VOC

352-Glasurit®Reducer

2:1+10%mixingstick

HVLP1.3 mm

2.0-3.0 bar

250-70 µm

30 min. at60 °C

or

Topcoat

22 Line Glasurit®HS 2K TopcoatVOC MC600

929-61, -63, -64Glasurit®Hardener VOC

352-10, -30, -40Glasurit®Reducer

3:1:1mixingstick

HVLP1.3 mm

2.0-3.0 bar

250-70 µm

30 min. at60 °C

Page 31: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 1

03/2018

Spray Filler System1006-26 Glasurit® UP-Spray Filler grey

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: This system should be applied when extensive body-filling is required (e.g. to repair damage caused by hail).

Cleaning

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry

Mechanicalde-rusting of

damaged areasP16-P150

700-10 Glasurit®Degreasing andcleansing agent,alternatively:541-5

1 x wipe dry

Body Filler

839-20 / 20KGlasurit® MultiPurpose BodyFiller

948-36Glasurit®Hardener Paste

+ 2-3% 20-30min. at20°C

3-5 min. P80/P150coarsesanding

Primer

285-26Glasurit® 2K SFPrimer

929-26Glasurit® 2K SFPrimer Hardener

352-Glasurit®Reducer

4:1:1mixingstick

HVLP1.7-1.9

mm2.0-3.0 bar

120-25 µm

20 min.at 60°C

11 min.

Alternatively: 151-170 Glasurit® UV Primer Filler grey considering a minimum film thickness of 60 µm.

Spray BodyFiller

1006-26Glasurit® UP-Spray Filler grey

948-22Glasurit®Hardener

1400: 50 2.5-3.0mm

2.0-3.0 bar

3-5150 –

300 µm

3 - 4 h at20°C or

30 min. at60°C

10 min. P150coarsesandingP240-P320fine

sanding

Caution: Primesand-throughon galvanisedor aluminium

substrateswith 285-26

Remark: If a film thickness of > 300 μm is required, a second spray body filler layer can be applied withoutintermediate sanding after having dried the first layer.

or alternatively: 839-85 Glasurit® Multi Brushing Body Filler

Primer Filler

285-505, -555,-655Glasurit® HSPrimer Filler

929-55, -56Glasurit® HSPrimer Hardener

352-Glasurit®Reducer

4:1:1mixingstick

HVLP1.7-1.9

mm2.0-3.0 bar

2spraycoats

25 min. at60 °C

5-10 min. P400- P500

or alternatively: Glasurit® 285- HS Primer Filler/Filler

Topcoat

22 Line Glasurit®HS 2K Topcoat

or 55 Line Glasurit®Basecoat

923-Glasurit® MS / HSClear

or 90 Line Glasurit®Basecoat

923-Glasurit® MS / HSClear

Page 32: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 3

10/2011

Painting of Plastics on Cars

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: Multi-purpose system suitable for all paintable plastic materials on cars. Pure polypropylene (PP) andpolyethylene (PE) cannot be painted. In order to guarantee paintability, modified plastic materials are usedfor vehicle parts that shall be painted. Although these plastic parts are often labelled PP, this material isnevertheless paintable.

Cleaning

541-30Glasurit®Universal cleanerfor plastics 1 x damaged

area:P80-P600entire part:

sandingpad

541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry

Heating ofPU foam and

polyamide(PA) to removemould release

agents and water,respectively

60 °C1 hour

1xmoistened

cloth

Fine BodyFiller

839-90Glasurit® PlasticBody Filler

948-36Glasurit®Hardener Paste

+ 2-3% 25 - 35min. at20 °C

P80/P150coarsesanding

581-90Glasurit® GuideCoat black

P240/P320 finesanding

Primer Filler

285-31Glasurit® HSNon-SandingFiller light grey

929-56Glasurit® HSVOC PrimerHardener normal

522-10Glasurit® plasticadditive

3:1:1mixingstick

HVLP1.3 mm

2.0-3.0 bar

1/2 + 120 -

35 µm

20 minat 20°C

or alternatively: 285-38, 285-49 Glasurit® Non-Sanding-FillerSystem S 3a

Topcoats

22 Line Glasurit®HS 2K TopcoatVOC

or 90 Line Glasurit®Basecoat

923-Glasurit® HSClear VOC

Topcoats or clears must be elastified by adding Glasurit® 522-111 Softface Additive before being applied toPU foam.22 Line Glasurit®HS 2K TopcoatVOC or 923-Glasurit® HSClear VOC

522-111Glasurit® Softface Additive

4:1

Mixture: HS2K Topcoat /Softface Additiveor HS Clear /Softface Additive

929-Glasurit®Hardener VOC

352-Glasurit®Reducer

2:1+10%mixingstick

HVLP1.3 mm

2.0-3.0 bar

250-70 µm

16 h at20 °C or

40 min. at60 °C

Page 33: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 3a

08/2019

Painting of Plastics on Cars

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: Multi-purpose system suitable for all paintable plastic materials on cars. Pure polypropylene (PP) andpolyethylene (PE) cannot be painted. In order to guarantee paintability, modified plastic materials are usedfor vehicle parts that shall be painted. Although these plastic parts are often labelled PP, the material isnevertheless paintable.

Cleaning

541-30Glasurit®Universal cleanerfor plastics 1 x damaged

area:P80-P600entire part:

sandingpad

541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry

Heating ofPU foam and

polyamide(PA) to removemould release

agents and water,respectively

60 °C1 hour

1xmoistened

cloth

Fine BodyFiller

839-90Glasurit® PlasticBody Filler

948-36Glasurit®Hardener Paste

+ 3 % 25 - 35min. at20 °C

P80/P150coarsesanding

581-90Glasurit® GuideCoat black

P240/P320 finesanding

AdhesionPrimer

934-10Glasurit® 1KPlastic AdhesionPrimer 2 min. 1

5 - 10 µm15 min

at 20 °C

Fillers andSurfacers

285-95Glasurit® HSTintable Filler

22 Line Glasurit®HS 2K TopcoatVOC

2:1mixingstick

Mixture: HS VOCTintable Filler/ HS2K Topcoat

522-111Glasurit® Softface Additive

4:1

Mixture: HS VOCTintable Filler/Softface Additive

929-Glasurit® HSFiller Hardener

352-Glasurit®Reducer

4:1:1mixingstick

HVLP1.7-1.9

mm2.0-3.0 bar

240-60 µm

4 h at20 °C or

40 min. at60 °C

P 800

or alternatively: Glasurit® HS Primer Filler/Filler 285-505, -555, -655, -700, -730, -790

Topcoats

22 Line Glasurit®HS 2K TopcoatVOC

or 90 Line Glasurit®Basecoat

923-Glasurit® HSClear VOC

1. Topcoats or clears must be elastified by adding Glasurit® 522-111 Softface Additive before being applied toPU foam.

Page 34: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 3a

08/2019

Painting of Plastics on Cars

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

22 Line Glasurit®HS 2K TopcoatVOC or 923-Glasurit® HSClear VOC

522-111Glasurit® Softface Additive

4:1

Mixture: HS2K Topcoat /Softface Additiveor HS Clear VOC/Softface Additive

929-Glasurit®Hardener VOC

352-Glasurit®Reducer

2:1+10%mixingstick

HVLP1.3 mm

2.0-3.0 bar

250-70 µm

16 h at20 °C or

40 min. at60 °C

Page 35: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 3b

12/2013

Painting of Factory-Primed Plastic Parts

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: New plastic hang-on parts are often factory-primed at the manufacturer’s plant. Field tests have shownthat the quality of such OEM primer coats varies significantly and may result in deficiencies with regard toadhesion as well as stone-chip and solvent resistance. In order to achieve the quality standards of OEMfinishes, we recommend the use of a filler on all new plastic hang-on parts to ensure sufficient stone-chipresistance.

Solventresistancetest

352-91Glasurit®Reducer normal

1 x

Primer coatswells, becomessticky, softens?

no = solvent-resistant

yes = solvent-sensitive

extremely solvent-sensitive

(complete dissolution or wrinkling during solvent resistance test) This indicates that the undercoat is notsound. Remove it completely before painting the part and then apply the desired paint system as described inprocess S 3.

solvent-sensitive Clean the part with Glasurit 700-1 Cleaner using a grey sanding pad. Carry out a second cleaning step alsowith 700-1 and wipe the part dry with a clean cloth. Allow the part to flash off for at least 10 minutes.Before topcoating, apply a “mild” Glasurit 285- sanding primer filler or filler plasticised with Glasurit 522-111Softface Additive. Spray several thin coats with long intermediate flash-off intervals.Attention! Any sand-throughs must then first be primed with Glasurit 934-10 1K Plastic Primer.

Primer filler

285-505, -555,-655Glasurit® HSPrimer Filler

522-111Glasurit® Softface Additive

4:1

Mixture: HSPrimer Filler /Softface Additive

929-Glasurit® HSFiller Hardener

352-Glasurit®Reducer

4:1:1mixingstick

HVLP1.7-1.9

mm2.0-3.0 bar

2 thincoats40 -

60 µm

flash offuntil mattbetween

spraycoats

4 h at20 °C or

40 min. at60 °C

P 800

Alternatively: 285-95 Glasurit® HS Tintable Filler

solvent-resistant

700-1Glasurit® Cleaner

wipe dry 1x witha grey

sandingpad

700-1Glasurit® Cleaner

1 x wipe dry

Page 36: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 3b

12/2013

Painting of Factory-Primed Plastic Parts

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Primer filler

285-31Glasurit® HSNon-SandingFiller light grey

929-56Glasurit® HSVOC PrimerHardener normal

522-10Glasurit® plasticadditive

3:1:1mixingstick

HVLP1.3 mm

2.0-3.0 bar

1/2 + 120 -

35 µm

20 minat 20°C

or alternatively: Glasurit 285-38 or -49 Non-Sanding Filler.

Topcoat

22 Line Glasurit®HS 2K TopcoatVOC

(1)

or 90 Line Glasurit®Basecoat

923-Glasurit® ClearVOC

(1)

(1) Topcoats and clears must be plasticised by adding Glasurit 522-111 Softface Additive before beingapplied to soft plastics (soft PU foam).22 Line Glasurit®HS 2K TopcoatVOC or 923-Glasurit®

522-111Glasurit® Softface Additive

4:1

Mixture of HS2K Topcoat +Softface Additiveor VOC Clear +Softface Additive

929-Glasurit®Hardener VOC

352-Glasurit®Reducer

2:1+10%mixingstick

HVLP1.3 mm

2.0-3.0 bar

250-70 µm

16 h at20 °C or

45 min. at60 °C

Page 37: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 3c

11/2018

Painting of Plastics on Cars

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: Multi-purpose system suitable for all paintable plastic materials on cars. Pure polypropylene (PP) andpolyethylene (PE) cannot be painted. In order to guarantee paintability, modified plastic materials are usedfor vehicle parts that shall be painted. Although these plastic parts are often labelled PP, this material isnevertheless paintable.

Cleaning

541-30Glasurit®Universal cleanerfor plastics 1 x damaged

area:P80-P600entire part:

sandingpad

541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry

Heating ofPU foam and

polyamide(PA) to removemould release

agents and water,respectively

60 °C1 hour

700-101x

moistenedcloth

Fine BodyFiller

839-90Glasurit® PlasticBody Filler

948-36Glasurit®Hardener Paste

+ 2-3% 25 - 35min. at20 °C

P80/P150coarsesanding

581-90Glasurit® GuideCoat black

P240/P320 finesanding

700-101x

moistenedcloth

Wet-on-WetPrimer Filler

285-270, -230,-290Glasurit® PrimerFiller Pro

929-58Glasurit® HSFiller Hardener

522-10Glasurit® plasticadditive

4:1:1mixingstick

HVLP1.3-1.4

mm2.0 bar

1/2 +1spraycoats30-40 µm

25 -30 minat 20°C

SandingPrimer Filler

285-270, -230,-290Glasurit® PrimerFiller Pro

929-58Glasurit® HSFiller Hardener

522-10Glasurit® plasticadditive

5:1:1mixingstick

HVLP1.7-1.9

mm2.0-3.0 bar

1/2 +1spraycoats50-70 µm

35 min.at 60°C

Topcoats

22 Line Glasurit®HS 2K TopcoatVOC

or 90 Line Glasurit®Basecoat

923-Glasurit® HSClear VOC

1. Topcoats or clears must be elastified by adding Glasurit® 522-111 Softface Additive before being applied toplastics.22 Line Glasurit®HS 2K TopcoatVOC or 923-Glasurit® HSClear VOC

522-111Glasurit® Softface Additive

4:1

Page 38: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 3c

11/2018

Painting of Plastics on Cars

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Mixture: HS2K Topcoat /Softface Additiveor HS Clear VOC/Softface Additive

929-Glasurit® HSTopcoat Hardener

352-Glasurit®Reducer

2:1+10%mixingstick

HVLP1.3 mm

2.0-3.0 bar

250-70 µm

16 h at20 °C or

40 min. at60 °C

2. Topcoats or clears must be elastified by adding Glasurit® 522-111 Softface Additive before being applied toPU foam.22 Line Glasurit®HS 2K TopcoatVOC or 923-Glasurit® HSClear VOC

522-111Glasurit® Softface Additive

2:1mixingstick

Mixture: HS2K Topcoat /Softface Additiveor HS Clear VOC/Softface Additive

929-Glasurit® HSTopcoat Hardener

352-Glasurit®Reducer

2:1+10%mixingstick

HVLP1.3 mm

2.0-3.0 bar

250-70 µm

16 h at20 °C or

40 min. at60 °C

Page 39: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 4

04/2014

Economical Repair System

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: Economical repair process for time-saving, low-cost refinishing of small defects and for coating new parts.Considerable time is saved by a wet-on-wet application of Glasurit® 285-31, 285-38, 285-49 Non-SandingFiller.

Cleaning

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry

Mechanicalde-rusting of

damaged areasP16-P150

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry

Body Filler(coarse +fine)

839-20 / 20KGlasurit® MultiPurpose BodyFiller

948-36Glasurit®Hardener Paste

+ 2-3% 20-30min. at20°C

3-5 min. P80/P150coarsesanding

581-90Glasurit® GuideCoat black

P240/P320 finesanding

700-11x

wipe dry

Primer

283-150Glasurit® EtchPrimer Filler

352-230Glasurit®Activator

1:1mixingstick

HVLP1.3-1.8

mm2.0-3.0 bar

1 thin coat10-15 µm

10 min.at 20°C

Fillers andSurfacers

285-38, -49Glasurit® HSNon-SandingFiller

929-55, -56Glasurit® HSPrimer Hardener

352-Glasurit®Reducer

3:1:1mixingstick

HVLP1.3 mm

2.0-3.0 bar

1 - 220-35 µm

10 -20 minat 20°C

or alternatively: Glasurit® HS Tintable Filler 285-95; Glasurit® 285-31 HS Non-Sanding Filler

Topcoats

22 Line Glasurit®HS 2K TopcoatVOC

or 90 Line Glasurit®Basecoat

923-Glasurit® ClearVOC

Page 40: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 4a

10/2011

Repair System for new e-coated parts

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: Economical repair process for time-saving, low-cost refinishing of e-coated parts without sanding.Considerable time is saved by a wet-on-wet application of Glasurit® 285-31, 285-38, 285-49 Non-SandingFiller.

Remarks: New E-coated parts have to be protected from sun light; because there is a risk of loose adhesion andcorrosion protection.

Cleaning

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry

Fillers andSurfacers

285-31Glasurit® HSNon-SandingFiller light grey

929-55, -56Glasurit® HSPrimer Hardener

352-Glasurit®Reducer

3:1:1mixingstick

HVLP1.3 mm

2.0-3.0 bar

1 - 220-35 µm

10 -20 minat 20°C

or alternatively: Glasurit® 285-38, 285-49 HS Non-Sanding Filler

Topcoats

22 Line Glasurit®HS 2K TopcoatVOC

or 90 Line Glasurit®Basecoat

923-Glasurit® ClearVOC

Page 41: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 7a

06/2018

Blend-in Refinishing System22 Line Glasurit® HS 2K Topcoat VOC

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: In general, panel repairs with solid colours – including a complete refinish of the damaged body part – donot cause any problems. When colour differences beyond allowable limits are to be expected, and whenthe areas to be refinished are not limited by trim strips or edges, it may be more advantageous to even outcolour differences by means of a gradual blend-in. This procedure can be considerably more efficient andeconomical than time-consuming colour matching.

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry

563-808Glasurit® FlattingPaste

563-808 +sanding

pad

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry

22 Line Glasurit®HS 2K TopcoatVOC

2:1+10%mixingstick

HVLP1.3 mm

2.0-3.0 bar

1 - 2

22 Line Glasurit®HS 2K TopcoatVOC

2:1+10%mixingstick

HVLP1.3 mm

1.0-2.0 bar

1fading outinto the

surroundingarea

5 min. at20°C

Page 42: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 7a

06/2018

Blend-in Refinishing System22 Line Glasurit® HS 2K Topcoat VOC

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

923-Glasurit® ClearVOC

Referto the

technicaldata sheet

HVLP1.3 mm

2.0-3.0 bar

1 - 2 30 min. at60 °C

For blending in on fade-out areas / clearcoat transition352-450Glasurit® Blend-in Reducer

HVLP1.3 mm

1.0-2.0 bar

1 - 2 30 min. at60 °C

Alternatively: 352-500 Glasurit® Spot-Blender

Page 43: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 7b

06/2018

Blend-in Refinishing System22 Line Glasurit® HS 2K Topcoat VOC MC600

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: In general, panel repairs with solid colours – including a complete refinish of the damaged body part – donot cause any problems. When colour differences beyond allowable limits are to be expected, and whenthe areas to be refinished are not limited by trim strips or edges, it may be more advantageous to even outcolour differences by means of a gradual blend-in. This procedure can be considerably more efficient andeconomical than time-consuming colour matching.

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry

563-808Glasurit® FlattingPaste

563-808 +sanding

pad

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry

22 Line Glasurit®HS 2K TopcoatVOC MC600

3:1:1mixingstick

HVLP1.3 mm

2.0-3.0 bar

1 - 2

22 Line Glasurit®HS 2K TopcoatVOC MC600

3:1:1mixingstick

HVLP1.3 mm

1.0-2.0 bar

1fading outinto the

surroundingarea

5 - max.60 min.at 20°C

Page 44: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 7b

06/2018

Blend-in Refinishing System22 Line Glasurit® HS 2K Topcoat VOC MC600

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

923-Glasurit® ClearVOC

Referto the

technicaldata sheet

HVLP1.3 mm

2.0-3.0 bar

1 - 2 30 min. at60 °C

For blending in on fade-out areas / clearcoat transition352-450Glasurit® Blend-in Reducer

HVLP1.3 mm

1.0-2.0 bar

1 - 2 30 min. at60 °C

Alternatively: 352-500 Glasurit® Spot-Blender

Page 45: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9

01/2012

Blending in on the panel being repaired with Glasurit® 90 LineBasecoat

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: In principle, panel repairs with basecoat/clearcoat systems are possible, and therefore, generally, it isnot necessary to respray adjacent body parts. When colour differences beyond allowable limits are to beexpected and when the areas to be re sprayed are not limited by trim strips or edges, the more appropriatemethod to balance colour differences may be to blend in the damaged area and the adjacent part, ifrequired.This procedure can be considerably more efficient and economical than time-consuming colourmatching.

1. Pre-treatment of the blending area700-1Glasurit® Cleaner

1 x wipe dry Foam padP1000-P2000

700-1Glasurit® Cleaner

1 x wipe dry

See the Glasurit RATIO System TDS for the preparation of the damaged area.

2. Refinishing of the panel to be repaired90-M50Glasurit®Blending Clear

2:193- E3 or

93- E3slow

HVLP 1.3 mm 2.0 bar

1

Page 46: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9

01/2012

Blending in on the panel being repaired with Glasurit® 90 LineBasecoat

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

3. Refinishing of the damaged area90 Line Glasurit®Basecoat

2:193- E3 or

93- E3slow

HVLP1.3 mm

1.0-2.0 bar

2fading outinto the

surroundingarea

flash offuntil matt

Note:Apply two spraycoats without intermediate flash-off.For a soft transition, the second spraycoatoverlaps the first.

4. Application of the coat to match the effect90 Line Glasurit®Basecoat

2:193- E3 or

93- E3slow

HVLP1.3 mm

1.0-2.0 bar

1/2 tomatcheffect

flash offuntil matt

Note:Apply the coat to match the effect.

5. Clearcoat application923-Glasurit® HSClear VOC

Referto the

technicaldata sheet

HVLP1.3 mm2.0 bar

1 1/2 - 2 30 min. at60 °C

Note:Apply the clearcoat. When the areas to be refinishedare not limited by trim strips or edges, the clear mustbe applied fading out around the repair. It may onlybe dried after levelling with 352-450 or 352-500.

Page 47: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9

01/2012

Blending in on the panel being repaired with Glasurit® 90 LineBasecoat

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

6. Levelling of clearcoat in fade-out or transition area352-450 Glasurit®Blend-in Reduceror 352-500Glasurit® Spot-Blender

HVLP1.3 mm

1.0-2.0 bar

1 - 2 30 min. at60 °C

Page 48: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9.1

11/2016

Blending in on the adjacent panel with Glasurit® 90 LineBasecoat

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: In principle, panel repairs with basecoat/clearcoat systems are possible, and therefore, generally, it is notnecessary to respray adjacent body parts. But when colour differences beyond allowable limits are to beexpected and when the areas to be resprayed are not limited by trim strips or edges, the more appropriatemethod to balance colour differences may be to blend in the damaged area and/or the adjacent part. Thisprocedure can be considerably more efficient and economical than time-consuming colour matching.

1. Pre-treatment of the adjacent panel700-1Glasurit® Cleaner

1 x wipe dry Foam padP1000-P2000

700-1Glasurit® Cleaner

1 x wipe dry

See the Glasurit RATIO System TDS or Repair System 4a for the preparation of the new panel / the panel tobe repaired.

2. Refinishing of the new panel / the panel to be repaired90 Line Glasurit®Basecoat

2:1*93- E3 or

93- E3slow

HVLP 1.3 mm 2.0 bar

1 thin coat flash offuntil matt

Note:Paint the new panel / the panel to be repaired up toabout 10 cm before the transition to the adjacent panel.

Page 49: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9.1

11/2016

Blending in on the adjacent panel with Glasurit® 90 LineBasecoat

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

3. Refinishing of the transition area and the adjacent panel90-M50Glasurit®Blending Clear

2:193- E3 or

93- E3slow

HVLP 1.3 mm 2.0 bar

1

4. Refinishing of the transition between both panels90 Line Glasurit®Basecoat

2:1*93- E3 or

93- E3slow

HVLP 1.3 mm 1.5 bar

2fading outon bothpanels

Note:Apply two spraycoats without intermediateflash-off and with reduced spraying pressure.

5. Refinishing of the new panel / the panel to be repaired90 Line Glasurit®Basecoat

2:1*93- E3 or

93- E3slow

HVLP 1.3 mm 2.0 bar

1 fadingout

towardsthe edge

of thepanel

flash offuntil matt

Note:Apply a covering spraycoat, finishingjust before the edge of the adjacent panel.

Page 50: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9.1

11/2016

Blending in on the adjacent panel with Glasurit® 90 LineBasecoat

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

6. Application of the coat to match the effect to the transition area and the adjacent panel90 Line Glasurit®Basecoat

2:1*93- E3 or

93- E3slow

HVLP 1.3 mm

0.8-1.5 bar

1/2 fadingout onboth

panels

Note:Apply the coat to match the effect withreduced spraying pressure.

7. Application of the coat to match the effect to the new panel / the panel to be repaired90 Line Glasurit®Basecoat

2:1*93- E3 or

93- E3slow

HVLP 1.3 mm 2.0 bar

1/2fading outinto the

surroundingarea

Note:Apply the coat to match the effectfading out to the adjacent panel.

8. Clearcoat application923-Glasurit® HSClear VOC

Referto the

technicaldata sheet

HVLP1.3 mm2.0 bar

1 1/2 - 2 30 min. at60 °C

Note:Apply the clearcoat. * in the case of silver colours, add another 10 - 20% of 93-E3 (18 - 22 s DIN 4)

Page 51: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9.2

01/2016

Blend-in Repair System90 Line Glasurit® Pearl Effect Basecoat

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: Translucent pearl effect finishes cannot be repaired by edge-to-edge panel refinishing because differentspraying techniques and film thicknesses give different effects. A successful repair requires large-scaleblending into the adjacent surfaces. To obtain a perfect result the refinisher has to use the same groundcoat colour and pearl effect basecoat that were used for the OE finish.Spot repairs on the panel being repaired do not give a satisfactory result. Always fade out on the adjacentpanel(s).

700-1Glasurit® Cleaner

1 x wipe dry

563-808Glasurit® FlattingPaste

563-808 +sanding

pad

700-1Glasurit® Cleaner

1 x wipe dry

Solid ColourGround Coat: 90Line Glasurit®Basecoat 2:1

93- E3HVLP

1.3 mm2.0-3.0 bar

2spraycoats

Mask adjacent surfaces.

Solid ColourGround Coat: 90Line Glasurit®Basecoat 2:1

93- E3HVLP

1.3 mm1.0-2.0 bar

1 fadingout onneigh-bouringpanel

flash offuntil matt

Page 52: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9.2

01/2016

Blend-in Repair System90 Line Glasurit® Pearl Effect Basecoat

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

90 Line Glasurit®Pearl EffectBasecoat

2:193- E3

HVLP1.3 mm

2.0-3.0 bar

1 flash offuntil matt

1 flash offuntil matt

1/2 flash offuntil matt

923-Glasurit® ClearVOC

Referto the

technicaldata sheet

HVLP1.3 mm

2.0-3.0 bar

2spraycoats

30 min. at60 °C

Page 53: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9.5

01/2016

Glasurit® - Spot Repair Process

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: In principle, this process is designed for the repair of smaller scratches and small stone chip damages orother cosmetic damages. For maximum cost effectiveness, the repair size/area should be kept as smallas possible.

Cleaning /polishing

700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry

Prepare thecar parts for

color retrievalby cleaning,

polishing andremoving small

scratches.

Standardpolish

700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry

Preparation ofdamaged area

Sand spot withorbital sander (75mm) before body

filler or primerfiller application

P240- P400

700-1Glasurit® Cleaner

1 x wipe dry

Body filler

839-20 / 20KGlasurit® MultiPurpose BodyFiller

948-36Glasurit®Hardener Paste

+ 2-3% 3-5 min. 20-30min. at20°C

P240- P400

Clean surfacewith 700-10

GlasuritDegreasing

and cleansingagent before

applying 285-270.

700-101x

wipe dry

Note: Use Glasurit 839-90 Body Filler for repairs on plastic parts.

Primer fillerapplication

285-270Glasurit® PrimerFiller Pro, grey

929-58Glasurit® HSFiller Hardener

352-50Glasurit®Reducer

4:1:1wet on wetadjustment

Mini HVLPspraygun

1.0 –1.2 mm1.0 –

1.5 bar

1/2 +1spraycoats30-40 µm

9 min.

Note: Alternatively: 285-230 / -290 Glasurit Primer Filler Pro, white / black. For plastic parts, add 522-10 Glasuritplastic additive.Alternatively: 183-70 / -90 Glasurit 1K Express Primer Filler, light grey / dark grey

Sanding ofprimer filler /fade-out area

Fine sandingwith orbital

sander (75 mm)P500 /

P1000

- P3000

700-11x

wipe dry

Basecoat(mixing ratio)

90 Line Glasurit®Basecoat

93-E3Glasurit®Adjusting base

2:1mixingstick

Page 54: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9.5

01/2016

Glasurit® - Spot Repair Process

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Blendingclear (mixingratio)

90-M50Glasurit®Blending Clear

93-E3Glasurit®Adjusting base

2:1mixingstick

Basecoat(mixture of 90Line and 90-M50)

90 Line Glasurit®Basecoat (readyfor use)

90-M50Glasurit®Blending Clear(ready for use) 2:1

mixingstick

Mini HVLPspraygun

1.0 –1.2 mm1.0 –

1.5 bar

Spraycoatsuntil

covered

flash offuntil mattbetween

spraycoatsand before

clear

Note: Apply and fade out 90 Line Glasurit Basecoat in thin, covering spraycoats.

Clear

923-610Glasurit® HSClear fast-dryingVOC

929-61Glasurit®Hardener VOCfast

523-15Glasurit® RacingAdditive

3:1:1mixingstick

Mini HVLPspraygun

1.0 –1.2 mm1.0 –

1.5 bar

1/2 +1 10 min.

or

10 min.at 60°C

Note: Alternatively: 923-135352-500Glasurit® Spot-Blender

Mini HVLPspraygun

1.0 –1.2 mm1.0 –

1.5 bar

Fade-out /polishing

area

8 min.

or

15 min.at 60°C

Note: Apply 352-500 Glasurit Spot Blender to the fade-out / polishing area to produce a smooth transition betweenthe refinish clearcoat and the old paintwork.

Polishing

Cool downbefore polishing

Polish the fade-out and the

complete repairarea with anappropriate

polishing system

Standardpolish

Page 55: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9.6

05/2019

Blending in on the adjacent panel with Glasurit® 90 Line tri-coat colors (translucent step 2)

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Remarks: This system describes the Blending in on the adjacent panel with 90 Line tri-coat colors with translucentStep 2 ( like e. g. Mazda 41V / 46V or Renault NNP Rouge Flamme).With all translucent colors there is the need to verify the number of spray coats required for each colormatch and for each vehicle. Therefore, and due to differences in application techniques we recommend toapply different numbers of spray coats of Step 2 (translucent coat) on test panels coated with Step 1.This process provides paint material and time saving advantages:• Easier and safer blending process• Do not use Glasurit® Blending Clear 90-M50.Recommendation: Please check color and application first on test panels before applying to the vehicle.Please refer to the following Blending Process:

Properties: In principle, panel repairs with translucent 90 Line tri-coat colors are possible. But when color differencesbeyond allowable limits are to be expected, the more appropriate method to balance color differences maybe to blend into the damaged area and / or the adjacent panel, depending on the damage. This procedurecan be considerably more efficient and economical than time-consuming color matching.

Remarks: • Stick to the recommended flash-off times.• Flash off after each spray coat until the surface is completely mat.• Flash off times can be reduced by additional ventilation with blow equipment (e. g. Dry Jet).• Brief increase of temperature in combined spray booths or by intermediate drying at 40°C in the

oven after the final coat.• An increasing basecoat thickness needs more flash off time.

Final sanding of the filler surfacer with orbital sander, not coarser thanP500, and not finer than P1000.

1. Pre-treatment of the adjacent panel.700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry Foam pad

P1000-P1200

700-1Glasurit® Cleaner

1 x wipe dry

Mask the adjacent panel if necessary.

Page 56: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9.6

05/2019

Blending in on the adjacent panel with Glasurit® 90 Line tri-coat colors (translucent step 2)

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

2. Refinishing of the new panel / the panel to be repaired (Step 1)90 Line Glasurit®Basecoat step 1

2:193- E3

HVLP1.3 mm2.0 bar

2 (sprayto cover)+ 1/2 tomatch

the effect

Notes:Demask the adjacent panel, after the last spray coat has dried.Using Step 1 fade out and overlap each spray coat into the adjacent panel.Keep the blend small and keep the edge transition soft and gradual.Maximum pressure 1.5 bar when blending out.Blending agent 90-M50 is not needed for this process.

2.1 Refinishing of the blend transition area into the adjacent panel Step 190 Line Glasurit®Basecoat step 1

2:193- E3

HVLP 1.3 mm

1.0 -1.5 bar

1 - 2fading outon bothpanels

1/2 tomatch

the effect

flash offuntil matt

Notes:Reduce spray gun pressure when blending.After Step 1 has dried, use tack rag on the blended panel to remove any loose over spray.

Page 57: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9.6

05/2019

Blending in on the adjacent panel with Glasurit® 90 Line tri-coat colors (translucent step 2)

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

2.2 Refinishing of the transition area [optional]90-M5Glasurit® Tri-coat-Additive

2:193- E3

100 g90-M5(RFU)30 g

Step 1(RFU)

HVLP 1.3 mm

1.0 -1.5 bar

2 - 3 flash offuntil matt

Notes:For some colours it can be helpful to blend smoother intothe transition area. This optional step can be used for that.For a smoother transition, 2 -3 coats should be sprayed fromthe outside to the inside.Loose over spray should again be removed by a tack rag when dry.

3. Refinishing of the new panel / the panel to be repaired and of the adjacent panel Step 290 Line Glasurit®Basecoat step 2

2:193- E3

HVLP1.3 mm2.0 bar

2,0 baron the

repairedpanel; 1,5bar on theblendingin zone

1 - 2 + 1/2to matchthe effect

flash offuntil matt

Notes:Fade out and overlap each spray coat into the adjacent panel.Reduce pressure when blending into the adjacent panel.Apply the ½ coat to match the effect over the repaired area with reduced pressure of 1.5 bar.Apply staggered overlaps to produce consistent basecoat finish.

Page 58: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 9.6

05/2019

Blending in on the adjacent panel with Glasurit® 90 Line tri-coat colors (translucent step 2)

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

4. Clearcoat application923-Glasurit® ClearVOC

Referto the

technicaldata sheet

HVLP1.3-1.4

mm2.0 bar

2spraycoats

30 min. at60 °C

Page 59: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 10

11/2017

Refinishing with Low-Solvent ProductsGlasurit® VOC Refinishing Process

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: Repair process that meets all current and future VOC laws and regulations. It is based on the "TechnologyGuidelines for Vehicle Refinishes" of CEPE (European Council of the Paint, Printing Ink and Artists' ColoursIndustry), with national legislation not being taken into account.

Cleaning

700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry

Mechanicalde-rusting of

damaged areasP16-P150

700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry

Body Filler(coarse +fine)

839-20 / 20KGlasurit® MultiPurpose BodyFiller

948-36Glasurit®Hardener Paste

+ 2-3% 20-30min. at20°C

3-5 min. P80/P150coarsesanding

P240/P320 finesanding

700-1Glasurit® Cleaner

1 x wipe dry

Note: Clean the surface with Glasurit 700-10 Degreasing and cleaning agent before applying 285-270.

Primer Filler

285-270Glasurit® PrimerFiller Pro, grey

929-58Glasurit® HSFiller Hardener

352-Glasurit®Reducer

5:1:1mixingstick

HVLP1.7-1.9

mm2.0-3.0 bar

1/2 +1 35 min. at60 °C

P 800 P400- P500

or

Primer

283-150Glasurit® EtchPrimer Filler

352-230Glasurit®Activator

1:1mixingstick

HVLP1.3-1.8

mm2.0-3.0 bar

1 thin coat10-15 µm

10 min.at 20°C

Primer Filler

285-505, -555,-655Glasurit® HSPrimer Filler

929-55, -56Glasurit® HSPrimer Hardener

352-Glasurit®Reducer

4:1:1mixingstick

HVLP1.7-1.9

mm2.0-3.0 bar

2spraycoats

25 min. at60 °C

5-10 min. P400- P500

P 800

Alternative: 285-700, 285-790, 285-95 Glasurit® HS Primer Filler / Filler

Basecoat

90 Line Glasurit®Basecoat

93-E3Glasurit®Adjusting base

2:1mixingstick

HVLP1.3 mm

2.0-3.0 bar

2 + 1/2spraycoats

flash offuntil mattbetween

spraycoatsand before

clear

Page 60: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 10

11/2017

Refinishing with Low-Solvent ProductsGlasurit® VOC Refinishing Process

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Clear

923-Glasurit® ClearVOC

929-Glasurit®Hardener VOC

352-Glasurit®Reducer

Referto the

technicaldata sheet

HVLP1.3 mm

2.0-3.0 bar

2spraycoats

Referto the

technicaldata sheet

or

Topcoat

22 Line Glasurit®HS 2K TopcoatVOC

929-Glasurit®Hardener VOC

352-Glasurit®Reducer

2:1+10%mixingstick

HVLP1.3 mm

2.0-3.0 bar

2spraycoats

30 min. at60 °C

or

Topcoat

22 Line Glasurit®HS 2K TopcoatVOC MC600

929-61, -63, -64Glasurit®Hardener VOC

352-10, -30, -40Glasurit®Reducer

3:1:1mixingstick

HVLP1.3 mm

2.0-3.0 bar

2spraycoats

30 min. at60 °C

Page 61: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 12

01/2015

Glasurit® Mat Clear System

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: Refinishing process for 90 Line basecoat/clearcoat systems with Glasurit 923-55 MS Clear extra mat andGlasurit 923-57 MS Clear mat elastified.

Substrates: Please see the Glasurit RATIO System TDS for the refinishing steps up to the application of 90 Line.Remarks: • Due to the different mixing ratio ratios of the clears to be used, you may achieve a gloss level between

12-65 units (at an angle of 60°). The gloss level may be higher for light and pure silver colours.Additionally, car bodies may show gloss level differences between vertically and horizontally coatedpanels. Therefore, we recommend to produce a spray-out sample before each refinishing job andto compare it with the area to be repaired.

• Stir the 923-55 and 923-57 clears well before use!• In order to avoid any gloss deviation when refinishing mat clearcoats, it is important

- to observe the recommended film thicknesses for basecoat and clearcoat- to apply staggered overlaps to produce consistent basecoat and clearcoat film thicknesses.- to allow the clear to flash off until completely mat after each spraycoat. (Generally, after the firstspraycoat 10-15 min and after the second spraycoat 15-20 min. That depends on air speed andspraybooth temperature.) Do not flash off for more than 25 min after each spraycoat.

• With mat surfaces it is not possible- to remove dust inclusions by polishing because polishing changes the gloss level. Therefore, it isvery important to work very carefully during cleaning and application.- to fade out the clear because the film thickness in the blending area varies, which changes thegloss level. Therefore, always apply the clear to the whole panel!

• Please also observe the technical product data sheets for Glasurit 923-55 MS Clear extra mat andGlasurit 923-57 MS Clear mat elastified.

Cleaning 700-11x

wipe dry P400- P500

700-11x

wipe dry

90 Line

90 Line Glasurit®Basecoat

93-E3Glasurit®Adjusting base

2:1mixingstick

HVLP1.3 mm

2.0-3.0 bar

2 + 1/210 -

15 µm

Flash offuntil mat

after eachspraycoat

Page 62: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 12

01/2015

Glasurit® Mat Clear System

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Option 1: Mix Glasurit 929-93 HS Topcoat Hardeners with Glasurit Clears:

Clear

923-55, -57Mixture:Glasurit® MSClear

929-93Glasurit® HSTopcoat Hardener

352-91Glasurit®Reducer normal

2:1+10%mixingstick

HVLP1.3 mm2.0 bar

240-50 µm

Flash offuntil mat

after eachspraycoat

30 min. at60 °C

Note: Flash off until mat after each spraycoat and before baking.After the first spraycoat, allow to flash off at least 10 min, after the second spraycoat for at least 15 min.Do not flash off for more than 25 minutes after each spraycoat.

Mixing ratio: Mixing ratio of Glasurit clears to achieve a gloss level of 20-65 unitswhen using Glasurit 929-93 HS Topcoat Hardener

923-55 923-57 923-255Gloss level+/- 2

at an angle of 60° Mixing ration (% by weight):

20 100 - -25 60 40 -30 40 60 -40 20 80 -53 - 100 -65 - 75 25

Further treatment: Mat surfaces cannot be polished to remove dust inclusions.

Page 63: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 12

01/2015

Glasurit® Mat Clear System

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Option 2: Mix Glasurit 929-33 VOC Hardener with Glasurit Clears:

Clear

923-55, -57Mixture:Glasurit® MSClear

929-33Glasurit®Hardener VOC

352-91Glasurit®Reducer normal

100% byweight33% byweight17% byweight

HVLP1.3 mm2.0 bar

240-50 µm

Flash offuntil mat

after eachspraycoat

30 min. at60 °C

Note: Flash off until mat after each spraycoat and before baking.After the first spraycoat, allow to flash off for at least 10 min, after the second spraycoat for at least 15 min.Do not flash off for more than 25 minutes after each spraycoat.

Mixing ratio: Mixing ratio of Glasurit clears to achieve a gloss level of 12-65 unitswhen using Glasurit 929-33 VOC Hardener

923-55 923-57 923-335923-115923-35

Gloss level+/- 2

at an angle of 60°Mixing ratio (% by weight)

12 100 - -20 50 50 -25 30 70 -30 20 80 -40 - 100 -53 - 90 1065 - 75 25

Further treatment: Mat surfaces cannot be polished to remove dust inclusions.

Page 64: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 12a

11/2018

Glasurit® Mat Clear System / modified

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: Refinishing process for 90 Line basecoat/clearcoat systems with Glasurit 923-55 MS Clear extra mat andGlasurit 923-58 MS Clear mat elastified.

Substrates: Please see the Glasurit RATIO System TDS for the refinishing steps up to the application of 90 Line.Remarks: • Due to the different mixing ratio ratios of the clears to be used, you may achieve a gloss level between

12-65 units (at an angle of 60°). The gloss level may be higher for light and pure silver colours.• Additionally, car bodies may show gloss level differences between vertically and horizontally coated

panels. Therefore, we recommend to produce a spray-out sample before each refinishing job andto compare it with the area to be repaired.

• Stir the 923-55 and 923-58 clears well before use!• In order to avoid any gloss deviation when refinishing mat clearcoats, it is important

- to observe the recommended film thicknesses for basecoat and clearcoat- to apply staggered overlaps to produce consistent basecoat and clearcoat film thicknesses.- to allow the clear to flash off until completely mat after each spraycoat. (Generally, after the firstspraycoat 10-15 min and after the second spraycoat 15-20 min. That depends on air speed andspraybooth temperature.) Do not flash off for more than 25 min after each spraycoat.

• With mat surfaces it is not possible- to remove dust inclusions by polishing because polishing changes the gloss level. Therefore, it isvery important to work very carefully during cleaning and application.- to fade out the clear because the film thickness in the blending area varies, which changes thegloss level. Therefore, always apply the clear to the whole panel!

• Please also observe the technical product data sheets for Glasurit 923-55 MS Clear extra mat andGlasurit 923-58 MS Clear mat elastified.

Cleaning 700-11x

wipe dry P400- P500

700-11x

wipe dry

90 Line

90 Line Glasurit®Basecoat

93-E3Glasurit®Adjusting base

2:1mixingstick

HVLP1.3 mm

2.0-3.0 bar

2 + 1/210 -

15 µm

Flash offuntil mat

after eachspraycoat

Page 65: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 12a

11/2018

Glasurit® Mat Clear System / modified

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Usage of 929-97 Glasurit Mat Clear System Hardener (Premix) in Glasurit clearcoats:

Clear

923-55, -58Mixture:Glasurit® MSClear

929-97Glasurit® MatClear SystemHardener(Premix)

2:1mixingstick

HVLP1.3 mm2.0 bar

240-50 µm

Flash offuntil mat

after eachspraycoat

30 min. at60 °C

Remark: Flash off until mat after each spraycoat and before baking.After the first spraycoat, allow to flash off for at least 10 min, after the second spraycoat for at least 15 min.Do not flash off for more than 25 minutes after each spraycoat.

Mixing ratio: Mixing ratio of Glasurit clears to achieve a gloss level of 12-65 unitswhen using 929-97 Glasurit Mat Clear System Hardener (Premix)

 923-55 923-58Gloss level+/- 2at an angle of 60° Mixing ration (% by weight)

12  100 - 20 85  1525  75  2530  55 4540 40  6053  30 7065 100

Further treatment: Mat surfaces cannot be polished to remove dust inclusions.

Page 66: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 13

11/2017

Glasurit® PRO Active repair process

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: Repair process with Glasurit PRO Active Wipes.Substrates: Glasurit PRO Active Wipes are intended for use on bare metal surfaces like steel, galvanized steel and

aluminum. A wipe can be used several times for wiping a surface of up to 3 m² (moist and not severelycontaminated).

Cleaning

700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry

Mechanicalde-rusting of

damaged areasP80 -P150

Body fillerapplication

P240/P320

Primerfiller

application

700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry

Body Filler(coarse+ fine) (ifrequired)

839-20 / 20KGlasurit® MultiPurpose BodyFiller

948-36Glasurit®Hardener Paste

+ 2-3% 20-30min. at20°C

3-5 min. P80/P150coarsesanding

P240/P320 finesanding

700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry

Pretreatment

360-100Glasurit® PROActive Wipes

1xin crosscoats

Reaction timeat least 1

min at 20°Cflash off

until matt

Note: Used wipes can be reused during the same working day if they are still moist and clean. Application on baremetal surfaces only. Do not use on body filler patches or old paintwork.

Primer Filler

285-270Glasurit® PrimerFiller Pro, grey

929-58Glasurit® HSFiller Hardener

352-91Glasurit®Reducer normal

5:1:1mixingstick

HVLP1.7-1.9

mm2.0 bar

1/2 +1spraycoats50-70 µm

35 min. at60 °C

P400 -P1000

700-11x

wipe dry

Basecoat

90 Line Glasurit®Basecoat

93-E3Glasurit®Adjusting base

2:1mixingstick

HVLP1.3 mm

2.0-3.0 bar

2 + 1/2spraycoats

flash offuntil mattbetween

spraycoatsand before

clear

Clearcoat

923-Glasurit® ClearVOC

929-Glasurit®Hardener VOC

352-Glasurit®Reducer

Referto the

technicaldata sheet

HVLP1.3 mm

2.0-3.0 bar

2spraycoats

Referto the

technicaldata sheet

or Alternatively: 923-335

Page 67: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 13

11/2017

Glasurit® PRO Active repair process

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Topcoat

22 Line Glasurit®HS 2K TopcoatVOC

929-Glasurit®Hardener VOC

352-Glasurit®Reducer

2:1+10%mixingstick

HVLP1.3 mm

2.0-3.0 bar

2spraycoats

30 min. at60 °C

or

Topcoat

22 Line Glasurit®HS 2K TopcoatVOC MC600

929-61, -63, -64Glasurit®Hardener VOC

352-10, -30, -40Glasurit®Reducer

3:1:1mixingstick

HVLP1.3 mm

2.0-3.0 bar

2spraycoats

30 min. at60 °C

Page 68: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 15

09/2019

Paint system with 1K UV primer filler for repairs on plasticparts

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: Highly efficient repair solution for small / medium damages on painted assembly plastic parts by using 1KUV-A technology primer filler. Lower energy consumption and shorter process times compared to existingrepair solutions. UV technology allows fast drying with nearly no impact on substrate temperature.Pure polypropylene (PP) and polyethylene (PE) cannot be painted. In order to guarantee paintability,modified plastic materials are used for vehicle parts that shall be painted. Although these plastic parts areoften labelled PP, the material is nevertheless paintable.

Cleaning

541-5Glasurit® Waxand SiliconeRemover 1 x damaged

area:P80-P600entire part:

sandingpad

541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry 60 °C

1 hour1x

moistenedcloth

Fine BodyFiller

839-90Glasurit® PlasticBody Filler

948-36Glasurit®Hardener Paste

+ 3 % 25 - 35min. at20 °C

P80/P150coarsesanding

use guidecoat

P240/P320 finesanding

541-30Glasurit®Universal cleanerfor plastics

Primer

934-10Glasurit® 1KPlastic AdhesionPrimer 2 min. 1 thin coat

5-10 µm10 min.at 20°C

UV PrimerFiller

151-130, -170,-190Glasurit® UVPrimer filler 1.1

mm UV2.0 bar

1/2 20 sat 20°C

1 5 min.(UV-A >6 mW/cm²)

P400- P500

700-1Glasurit® Cleaner

1 x wipe dry

Note: Do not spray to cover, max. 80 µm. For good drying properties, respect the distance and heat-up time of thelamp and be aware of shadow edges.

Topcoat

22 Line Glasurit®HS 2K TopcoatVOC

or 22 Line Glasurit®HS 2K TopcoatVOC MC600

or 90 Line Glasurit®Basecoat

923-Glasurit® HSClear VOC

Page 69: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationS 15a

09/2019

Paint system with 1K UV primer filler for repairs on metalparts

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Properties: Highly efficient repair solution for small / medium damages on car panels by using 1K UV-A technologyprimer filler. Lower energy consumption and shorter process times compared to existing repair solutions.UV technology allows fast drying with nearly no impact on substrate temperature.

Cleaning

541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry

Mechanicalde-rusting of

damaged areasP80-P150

700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry

Body Filler(coarse +fine)

839-20 / 20KGlasurit® MultiPurpose BodyFiller

948-36Glasurit®Hardener Paste

+ 2-3% 20-30min. at20°C

3-5 min. P80/P150coarsesanding

P240/P320 finesanding

700-1Glasurit® Cleaner

1 x wipe dry

UV PrimerFiller

151-130, -170,-190Glasurit® UVPrimer filler 1.1

mm UV2.0 bar

1/2 20 sat 20°C

1 5 min.(UV-A >6 mW/cm²)

P400- P500

700-1Glasurit® Cleaner

1 x wipe dry

Note: Do not spray to cover. If higher film thicknesses are necessary, a second layer 151-130, -170, -190 UVPrimer filler can be applied with intermediate sanding after having dried the first layer, max. 120 µm. Forgood drying properties, respect the distance and heat-up time of the lamp and be aware of shadow edges.

Topcoat

22 Line Glasurit®HS 2K TopcoatVOC

or 22 Line Glasurit®HS 2K TopcoatVOC MC600

or 90 Line Glasurit®Basecoat

923-Glasurit® HSClear VOC

Page 70: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationE 1

10/2011

Glasurit® Paint Mixing System

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Mixing machines1. Mixing machines:The mixing machines are designed to hold basecoat/topcoat mixing and tinting bases at the same time.

All national regulations regarding explosion protection and the storage of flammable liquids must be observed.

2. Agitators:The agitators come as complete units that consist of the agitator, lid and driving mechanism. The height of theunits is already pre-adjusted.

Please remember to stir the paint in the open can thoroughly before attaching the agitator. Then place thecomplete agitator on the open mixing base can and fasten it by pressing and turning the clips. The unit is thenready for use.

3. OperationThe agitators should be run for approximately 10 minutes in the morning and evening.  

Remark: 

All nationally and/or locally applicable working directions, operating instructions and safety regulations as well as existingrules for the prevention of accidents and regulations on dangerous substances must be observed.

Page 71: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationE 1

10/2011

Glasurit® Paint Mixing System

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Mixing procedure1. General:Mixing bases must be stirred well before use. In order to obtain good mixing results, it is essential that themixing bases be in a homogeneous state.

The contents of new cans of mixing bases must therefore be stirred well before being placed in the mixingmachine, either by hand using a metal stick or with an electric/pneumatic stirrer. Then the agitator unit must beattached.

2. Determining the colour:Identify the colour of the vehicle to be refinished from the information given on the vehicle body itself or in thevehicle documents. With the help of the colour code, you will find the mixing formula on the respective colourmedia. Along with the standard colours, you will find the formulas of more colour variants. Furthermore, you mayalso use the Color Profi System to determine the corresponding CPS chip with the colour code. After havingchecked the corresponding CPS chip(s), you may then use the respective mixing formula to mix the colour.  

Please note: 

All details specified in the mixing formula must be strictly observed.3. Zeroing the scales:Place an empty can or mixing container on the weighing platform of the computer scales and zero the scales.

4. Weighing the amounts indicated:Since the mixing formulas give cumulative weights, it is not necessary to add up the individual amounts. Justadd each of the indicated mixing formula components until the scales show that the predetermined weight hasbeen reached, as given in the formula for the particular component concerned.

5. Stirring the mixture:After weighing has been completed, stir well with a mixing stick. For colour-related reasons, stirring should bedone from the edge of the can towards the centre, making sure that any paint clinging to the stick is carefullyscraped off into the can and stirred in. Before actually applying the paint mixed, you must make a spray-out (alsoapplying the clear when basecoat/clearcoat systems are concerned). Dry the spray-out and compare it with thevehicle to be refinished. If the colour does not match, adjust it by tinting or use a colour variant.

When using the Color Profi System, you seldom need a spray-out as the CPS chips are spray-outs themselves.

Page 72: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationE 2

10/2011

Glasurit® RATIO Color System

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

The Glasurit RATIO Color System: The quick and easy way to find the matching colour.The identification of the matching colour is one of the decisive process steps in automotive refinishing. Speedand precision are essential because the human eye is very critical.

Only when there is no visible difference between the original finish and the repaired area, the repair job wasperformed professionally.

This is why the continuous improvement of colour identification tools is of central importance for Glasurit. Whatwe offer is a complete system of colour information and colour tools.

The modules of the system:

Color Profi Systems Metallic and Uni

Up-to-date Glasurit Color Profi Systems are the ideal tools for an exact colour match because the swatchesconsist of colour chips sprayed with original Glasurit paint, and updates are offered at regular intervals to includethe latest vehicle colours.

RATIO Scan II

Glasurit RATIO Scan II combines a high-quality colorimeter with an application that is perfectly integrated intothe Glasurit RATIO Color System. The mobile device measures the exact colour directly on the car body. Thenthe readings can easily be transferred to the computer where they are processed with Profit Manager or ProfitManager Pro.

Profit Manager Pro, Lite and starter

Integrated solution for colour search, weigh-in process, stock management, reporting and order management.The software helps bodyshops worldwide to simplify and accelerate their workflows. The functions for colourand material management allow the painter to determine the costs precisely. The Glasurit Profit Managerenables bodyshops to exactly control and manage all working steps concerning the paint process.

Color Online

The internet-based and daily updated colour database Color Online is a component of Glasurit RATIO ColorSystems and has been for years now a well-known and proven tool for quickly and effortlessly finding mixingformulas. On the website, bodyshops can find all the information they need to reliably determine colour variantsand mix them precisely.

Color Info

A helpful colour information system providing colour samples of the most important international carmanufacturers, including original body, bumper and side panel colours.

The colour swatches of the current edition show all the standard colours that have been used by vehiclemanufacturers since 1995. Of course there are also colours from older vehicles that were still in productionin 1995. Together with the extensive index cards for 1995 to 2001/2002, the system provides a completedocumentation of all the colours found on cars over the past years.

Page 73: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationE 4

10/2011

Tips for colour matching

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Checking the colourTo do a good repair job, it is sometimes necessary to match the colour by tinting, blending in, or polishing the oldpaintwork. Therefore, careful comparison between the new paint and the original finish is essential. Any variation in colour must bemodified before application. The mixing formula shown on the microfiche can assist in this. You should use onlythe mixing bases contained in the mixing formula for tinting, or the reduced bases indicated in the tinting guide. An adequate colour comparison can only be carried out on a sprayed (not hand-painted) dry paint film (including the clear coatin the case of metallic finishes) and must be done in daylight, or under a daylight lamp. 22 Line HS 2K topcoat canbe compared already after a few minutes drying. With metallic colours, the spray-out (sample) as well as the actual spraying should be done by the same person.Due to weathering, age and washing, almost all paint finishes are subject to changes in appearance and colour.This is caused by the absorption of dirt or by external influences (temperature, humidity, UV radiation, acid rainetc.). These effects can in most cases be removed by polishing.Repairing basecoats is more difficult as the colour and the brightness of the metallic effect strongly depend onthe application method used. 1. On the diameter of the spray gun nozzle and the spraying pressure.With a small nozzle and high spraying pressure, the atomisation is finer. This produces a lighter colour. 2. On the reducer and the spraying viscosity.With a rather fast reducer, the silver effect achieved is usually more brilliant than that obtained with a rather slowreducer. The higher the viscosity, the coarser the spray pattern, which increases the risk of clouding. 3. On the spraying method.When you spray rather dry, or apply a dust coat, this makes the colour lighter and more metallic. When youspray rather wet, the colour appears fuller and darker. Within these variants, you find the full range of nuancesas regards metallic effect and colour. 4. On the distance of the spray gun from the object to be painted.A short distance between the spray gun and the object being painted produces a rather wet film and a ratherdark and chromatic shade. A wider distance results in a drier film and a lighter and more metallic colour. Colour alterationsIt may happen that OEM colours are slightly altered for technical or styling reasons, without the colour code and/or name being changed. Furthermore, production-related colour fluctuations can occur (for example with paintsfrom different production plants or of different quality etc.).

Page 74: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationE 4

10/2011

Tips for colour matching

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Notes on (mixing formulas of) colour variantsThe table below provides an outline of how the mixing formulas of (darker, lighter, bluer, redder etc.) colourvariants or (coarser, finer) effect variants are marked.

Mark Characteristic/ 20 coarser/ 30 finer/ 40 darker/50 bluer/60 yellower/70 greener/80 redder/90 lighter/0A less chromatic, dirtier/0B purer

You will also find mixing formulas with combined variant marks such as:

/ 48 darker and redder/7B greener and purer/62 yellower and coarser

Page 75: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationE 4

10/2011

Tips for colour matching

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Tinting Guide Glasurit® 22 Line HS 2K Topcoat

Colour Group more violett bluer greener yellower more orange redderwhite A 131 A 168 A 105 A 172 M 6

grey A 127 M 31

M 52

M 63

M 68

M 96

M 5 M 43

M 40 M146

M 38

M 201

M 6

violett M 31

M 52

A 346

M 55

blue A 127 M 68

M 96

M 5 M 40

M 43 M 77

M 146

M 6

M 55

green M 52

M 63

M 5 M 40

M 43 M 77

M 146

M 201

yellow A 131 A 168 A 172

M 201

M 6

beige M 30 A 131 A 168 M 5 M 40

M 43 M 77

M 146

A 172

M 38

M 201

M 6

orange M 5 M 40

M 43 M 77

M 146

A 346

M 6

M 326

bordeaux A 127

M 30

M 31 M 5

M 39

M 43

M 38

M 201

A 346

M 6

M 326

red M 30 A 131 M 5 M 40

M 43 M 77

M 146

M 38

M 201

lighter dirtierPlease use white bases only Please use black bases only

* Please use the bases from the corresponding mixing formula

Page 76: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationE 4

10/2011

Tips for colour matching

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Tinting Guide Glasurit® 90 Line Basecoat

Colour 

Group

more violett bluer greener yellower more orange redder darker

violett A 531

A 589

A 531

A 589

A 352 A 352

A 359

A 427

A 430

A 359

A 430

silver A 427 A 359 A 503

A 531

A 563

A 589

A 503

A 531

A 563

A 589

A 696 A 640 A 136

A 335

A 105

A 148

A 329

A 372 A 201 A 347

A 378

A 352

A 306

A 347

A 378

A 352

A 926

A 997

A 926

A 997

blue A 427

A 430

A 359

A 430

A 696 A 640 A 136

A 329

A 105

A 148

A 329

A 347 A 306

A 347

A 503

A 531

A 563

A 589

A 503

A 531

A 563

A 589

green A 503

A 563

A 589

A 503

A 563

A 589

A 136

A 143

M 115

A 105

A 143

A 148

A 115

A 329 A 306

A 329

A 696 A 640

yellow A 696

A 115

A 640

A 115

A 372 A 201 A 372 A 306

A 323

A 136

A 143

A 143

orange A 136

A 143

A 105

A 143

A 347

A 378

A 352

A 323

A 347

A 378

A 352

A 372 A 201

A 306

bordeaux A 696 A 640 A 136

A 143

A 329

A 105

A 143

A 329

A 148

A 372 A 201

A 306

A 347 A 323

A 347

A 926

A 997

A 926

A 997

red A 430 A 359

A 430

A 136

A 143

A 329

A 105

A 143

A 329

A 378

A 372

A 201

A 378

A 347

A 352

A 347

A 352

lighter dirtierface view Please use aluminiums only. Please use black bases onlyside view Please use white bases only Please use black bases only

* Please use the bases from the corresponding mixing formula.

Page 77: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 1

11/2017

Product list

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Body Fillers BF Hardeners Reducers

Glasurit® Multi Purpose Body Filler 839-20/20K 948-36948-52

Glasurit® Fine Body Filler 839-25 948-36

Glasurit® Soft-Body Filler 839-55 948-36948-52

Glasurit® Universal Body Filler 839-70/70K 948-36948-52

Glasurit® Multi Brushing Body Filler 839-85 948-36 max. 4% 352-10, -50

Glasurit® Plastic Body Filler 839-90 948-36

Glasurit® Glass fibre body filler 901-21 948-36

Glasurit® UP-Spray Filler grey 1006-26 948-22

Primers P Hardeners Reducers

Glasurit® 1K Anti-corrosive Primer 183-30

Glasurit® Etch Primer Filler 283-150 352-230

Glasurit® 2K SF Primer 285-26 929-26 352-50352-91

352-216

Glasurit® 1K Plastic Adhesion Primer 934-10

Page 78: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 1

11/2017

Product list

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Primer Fillers PF Hardeners Reducers

Glasurit® UV Primer filler grey 151-170

Glasurit® 1K Primer Filler 176-72 93 E3

Glasurit® 1K Express Primer Fillerlight grey

183-70

Glasurit® Etch Primer Filler 283-150 352-228 352-50352-91

Glasurit® Primer Filler Pro, white 285-230 929-58 352-50352-91

352-216

Glasurit® Primer Filler Pro, grey 285-270 929-58 352-50352-91

352-216

Glasurit® Primer Filler Pro, black 285-290 929-58 352-50352-91

352-216

Glasurit® HS Primer Filler, grey 285-505 929-55929-56

352-50352-91

352-216

Glasurit® HS Primer Filler, black 285-555 929-55929-56

352-50352-91

352-216

Glasurit® HS Primer Filler, white 285-655 929-55929-56

352-50352-91

352-216

Glasurit® Primer Filler 285-700 929-55929-56

352-50352-91

352-216

Glasurit® Primer Filler, white 285-730 929-55929-56

352-50352-91

352-216

Glasurit® Primer Filler, black 285-790 929-55929-56

352-50352-91

352-216

Page 79: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 1

11/2017

Product list

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Primer Fillers PF Hardeners Reducers

Glasurit® Epoxy Primer Filler grey 801-72 965-60 352-91352-216

Glasurit® 2K Plastic Primer Filler 934-70 929-56 352-50352-91

Fillers and Surfacers F Hardeners Reducers

Glasurit® HS Transparent Sealer 285-0 929-55929-56

352-50352-91

352-216

Glasurit® HS VOC Non-SandingFiller, light grey

285-31 929-55929-56

352-91352-216

Glasurit® HS VOC Non-SandingFiller, white

285-38 929-55929-56

352-91352-216

Glasurit® HS VOC Non-SandingFiller, black

285-49 929-55929-56

352-91352-216

Glasurit® HS VOC Tintable Filler,transparent

285-95 929-55929-56

352-50352-91

352-216

Topcoats T Hardeners Reducers

22 Line Glasurit® HS 2K TopcoatVOC

22- VOC 929-31929-33929-34

352-50352-91

352-216

22 Line Glasurit® HS 2K TopcoatVOC MC600

22- VOC MC600 929-61929-63929-64

352-10352-30352-50

90 Line Glasurit® Basecoat 90- 93-E3

Glasurit® Basecoat 90- LimitedEdition 90- Magic Collection

90- 93-E3

Glasurit® 90 Interior Color SystemMetallics/Solids/Pearl Effects

90-IC 440 93-IC 330 352-50352-91

352-216

Page 80: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 1

11/2017

Product list

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Clears C Hardeners Reducers

Glasurit® HS Clear VOC 923-35 929-31929-33929-34

352-91352-216

Glasurit® HS Clear scratch resistantVOC

923-45 929-31929-33929-34

352-91352-216

Glasurit® MS Extra Matt Clear 923-55 929-31 929-91929-33 929-93929-34 929-97

352-91

Glasurit® MS Clear matt Flexible 923-58 929-31 929-91929-33 929-93929-34 929-94

929-97

352-91

Glasurit® HS Universal Clear VOC 923-115 929-31929-33929-34

352-91352-216

Glasurit® HS Racing Clear VOC 923-135 929-31929-33

352-50352-91

352-216

Glasurit® HS Multi Clear VOC 923-335 929-31929-33929-34

352-91352-216

Glasurit® HS Clear scratch-resistantVOC

923-447 929-31929-33929-34

352-91352-216

Glasurit® HS Clear fast-drying VOC 923-610 929-61929-63929-64

352-10352-30352-40

Glasurit® HS Clear universal VOC 923-625 929-61929-63929-64

352-10352-30352-40

Glasurit® HS Clear superior glossVOC

923-630 929-61929-63929-64

352-10352-30352-40

Glasurit® HS Clear scratch-resistantVOC

923-645 929-61929-63929-64

352-10352-30352-40

Page 81: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 1

11/2017

Product list

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Miscellaneous X Hardeners Reducers

Glasurit® Tri-coat Additive 90-M5 93-E3 93-E3 lang

Glasurit® Blending Clear 90-M50 93-E3 93-E3 lang

Glasurit® Guide Coat black 581-90

Glasurit® Cleaner 700-1

Glasurit® Degreasing and cleansingagent

700-10

Glasurit® Coagulating powder 700-7

Glasurit® Stone chip and underbodyprotection

1109- 90-VE

Glasurit® Blend-in Reducer 352-450

Glasurit® Spot-Blender 352-500

Glasurit® Spot-Blender - aerosol can 352-500 AE

Page 82: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 1

11/2017

Product list

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Additives Z Hardeners Reducers

Glasurit® plastic additive 522-10

Glasurit® Brush- and Roll Additive 522-78

Glasurit® Soft face Additive 522-111

Glasurit® HS Flexible Matting agent 522-322

Glasurit® Texture additive Fine 522-345

Glasurit® Racing Additive 523-15

Glasurit® Anti-silicone additive 580-100

Glasurit® Hardener 929-

Glasurit® HS Topcoat Hardener / HSFiller Hardener

929- HS

Glasurit® Hardener VOC 929- VOC

Page 83: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 2

11/2017

Temperature tableWhich hardeners and which reducers should be used in 2K PU topcoat and inclears?

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

The material combination (hardener and reducer) may be changed depending on temperature and object size.The hardeners and reducers recommended below for the various temperature ranges are for overall resprays.For panel repairs, select the material combination indicated for the next lower temperature range.

Please also respect the latest technical information sheets! Glasurit® 923-625, -630, -645 Glasurit® 923-610 3:1:1 3:1:1Spray viscosity DIN 4 / 20°C 18 - 21 s 18 - 21 sfrom 15°C 929-61

352-10

352-30

929-61

352-10

from 20°C 929-63

352-30

352-40

929-61

352-10

352-30

from 25°C 929-63

352-40

929-61

352-30

from 30°C 929-64

352-40

929-63

352-40

Page 84: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 3

11/2013

Survey of processing pictographs

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Technical Information Pre-treatment

see data sheet cleaning

Mixing

mixing ratio 1:1for 2 components

mixing ratiofor 2 components

mixing ratiofor 3 components

use mixing stick hardener addition

Shake Spraycansbefore use

Viscosity adjustment

applicationviscosity

Application

gravity gun number of spraycoats

Page 85: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 3

11/2013

Survey of processing pictographs

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

body-filling brushing roller coating aerosol

Drying

flash off drying time infrared ultraviolet

Sanding

manualsanding wet

manualsanding dry

random orbitalsander / wet(pneumatic)

random orbitalsander / dry(pneumatic)

polishing

Color

mixing stirring inmixing machine

color checking hang-on part blending in

limited hidingpower

mixing formulabeing revised

mixing formulabeing revised

overall respray immiscible

Page 86: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 3

11/2013

Survey of processing pictographs

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

variants This color containsa Special Product.It can be ordered

from your distributor.

Special mixingcolor.This color can

be ordered fromyour distributor

color for interior color for enginecompartment /

boot

color for wheelrim and hubcap

formula usesmixing base thatis being phased

out

Multi-tone colorcombination

Mixing formulacontains lead

Textured color Mat color Clear coat

1-coat solid fullgloss color orbase coat for

multilayer color

Tinted clear Ground coat Three stagepainting (multi-

coat)

Paint system

Color for accent Color for stripe color for roof color foraccessories

Page 87: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 3

11/2013

Survey of processing pictographs

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Storage

protect from frost store in a cool place protect from humidity carefully sealcontainer

shelf life

Page 88: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 4

11/2017

Infrared dryingList of products with infrared drying parameters

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Glasurit® body fillers Duration Increase temperature by Max. surface temperature

839- Glasurit® Body Fillers 4 min 20°C / min 80°C

839-85 Glasurit® Multi BrushingBody Filler

10 min 20°C / min 90°C

1006-26 Glasurit® UP-Spray Fillergrey

10 min 20°C / min 90°C

Glasurit® primers Duration Increase temperature by Max. surface temperature

285-26 Glasurit® 2K SF Primer 3 min8 min

15°C / min20°C / min

65°C100°C

Glasurit® primerfillers / fillers

Duration Increase temperature by Max. surface temperature

176-72 Glasurit® 1K Primer Filler 3 min5 min

20°C / min20°C / min

65°C100°C

285- Glasurit® Primer Fillers 4 min5 min

15°C / min20°C / min

60°C80°C

285-230 Glasurit® PrimerFiller Pro, whiteFilm thickness 50 - 120 µm  

4 min5 - 11 min

15°C / min20°C / min

60°C80°C

285-270 Glasurit® PrimerFiller Pro, greyFilm thickness 50 - 120 µm  

4 min5 - 11 min

15°C / min20°C / min

60°C80°C

285-290 Glasurit® PrimerFiller Pro, blackFilm thickness 50 - 120 µm

4 min5 - 11 min

15°C / min20°C / min

60°C80°C

285-505 with 523-15 4 min 20°C / min 80°C

285-555 with 523-15 4 min 20°C / min 80°C

285-655 with 523-15 4 min 20°C / min 80°C

801- Epoxy Primer Fillers 4 min5 min

15°C / min20°C / min

60°C80°C

Page 89: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 4

11/2017

Infrared dryingList of products with infrared drying parameters

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Glasurit® topcoat /basecoat / clear

Duration Increase temperature by Max. surface temperature

22- VOC 22 Line Glasurit® HS 2KTopcoat VOC

4 min4 min

15°C / min20°C / min

60°C90°C

22- VOCMC600

22 Line Glasurit® HS 2KTopcoat VOC MC600

4 min4 min

15°C / min20°C / min

60°C90°C

90- 90 Line Glasurit® Basecoat 4 min 15°C / min 60°C

923- Glasurit® Standard Clear 4 min4 min

15°C / min20°C / min

60°C90°C

Glasurit® topcoat /basecoat / clear

Duration Increase temperature by Max. surface temperature

923-610 Glasurit® HS Clear fast-drying VOC

10 min 25°C / min 70°C

923-625 Glasurit® HS Clearuniversal VOC

10 min 15°C / min 100°C

923-630 Glasurit® HS Clear superiorgloss VOC

10 min 25°C / min 115°C

Page 90: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 5

10/2011

Advice on the use of HVLP sprayguns

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

FundamentalsHVLP is short for high volume low pressure. The limit values for some technical properties of HVLP spraygunswere fixed as follows based on the applicable regulations:

a.) transfer efficiency > 65%

b.) pressure at air cap/nozzle < 0.7 bar

Standard HVLP guns are designed for an air cap/nozzle pressure of 0.7 bar because the transfer efficiencylargely depends on the user.

AdvantagesDepending on the Glasurit® product used, application with an HVLP spraygun can help reduce product usageby 10 to 30%.

Instructions for use1. Viscosity setting Same as for conventional sprayguns.

Be sure to maintain a material temperature of about18-22°C.

2. Paint feed Must be adjusted individually at the spraygundepending on gun-to-object distance and workingspeed.

3. Air connectors Air hose diameter: 9 mm

Connections,couplings, nipples: 9 mm4. Air pressure setting As recommended by the gun manufacturer.5. Distance to object 10-15 cm6. Working speed Depending on:

(a) paint feed

(b) distance7. Spraying angle 90 degrees to the object being painted.8. Overlaps Spray overlaps for flow and in a staggered way.

Page 91: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 5

10/2011

Advice on the use of HVLP sprayguns

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Possible operating defects – cause and corrective actions Optimum spray pattern

In order to achieve an even spray pattern, make surethat all bore holes are absolutely clean. It may impairthe spray jet if you use objects for cleaning that aretoo hard.It may impair the spray jet if you use objectsfor cleaning that are too hard. An imprecisely centredneedle will also lead to an uneven spray pattern.

Sickle-shaped spray pattern Cause:

The full compressed air jet of a clean horn borepresses the flat jet to the clogged sides.

Pearl-like or oval spray pattern Cause:

Contamination of spray nozzle or air outlet.

Turn the air nozzle by 180 degrees. Clean the air capand the nozzle if the uneven spray pattern remainsunchanged. Clean the air cap if the spray defect keepsmoving around.

Page 92: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical InformationF 5

10/2011

Advice on the use of HVLP sprayguns

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Split spray pattern (resembling a swallow’s tail) Possible causes:

1. atomising pressure is too high

2. product is too thin

3. product feed is insufficient

Correct the defects by adjusting the air volume.

Jet flutters Possible causes:

1. product feed is insufficient

2. paint nozzle is not tight

3. paint nozzle seating is damaged at the paint nozzleor inside the nozzle set

Product bubbles or boils in the cup Cause: The atomising air gets into the cup via the paint

channel. The paint nozzle is not tight enough. The airnozzle was not fastened completely. Tighten, clean orreplace parts accordingly.

Page 93: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information839-20/20K

05/2014

Glasurit® Multi Purpose Body Filler G / BF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Coarse and fine body fillerProperties: High solids content; universally suitable for use on steel sheet, galvanised steel, aluminium; fast drying,

easy to sand, good adhesionRemarks: • Mix body filler and red hardener paste well before use (homogeneous colour, no marble effect).

• Do not exceed 3% of hardener.• Excess peroxide will cause discoloration in the finish.

Application 839-20 Coarse and fine body filler 829-20K Coarse and fine body filler

Paint system RATIO Aqua, RATIO HS

Mixing ratio 100% by weight 839-20 (can) 100% by weight 839-20K (cartridge)

Hardener 2-3% by weight 948-36 3% by weight 948-52 (depending on hardenercartridge)

Reducer

Potlife at 20 °C 4 - 5 min. 4 - 5 min.

Drying at 20 °CDrying at 60 °C

20 - 30 min. 20 - 30 min.

Infrared (short wave)Infrared (medium wave)

4 min.5 - 10 min.

4 min.5 - 10 min.

Sanding: orbital sander P80/150581-90 Guide CoatP240 body-filled area and old paintwork

P80/150581-90 Guide CoatP240 body-filled area and old paintwork

Page 94: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information839-25

10/2011

Glasurit® Fine Body Filler G / BF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Fine body fillerProperties: High solids content; universally suitable for use on steel sheet, galvanised steel, aluminium; fast drying,

easy to sand, good adhesionEspecially designed for use as a second body filling coat on Glasurit 839- knifing fillers to obtain anabsolutely pore-free repair area.For small damaged spots to be repaired in one working step.

Remarks: • Mix body filler and red hardener paste well before use (homogeneous colour, no marble effect).• Do not exceed 3% of hardener.• Excess peroxide will cause discoloration in the finish.

Application 839-25 Fine body filler

Paint system RATIO Aqua , RATIO HS

Mixing ratio 100% by weight 839-25

Hardener 2-3% by weight 948-36

Reducer

Potlife at 20 °C 4 - 5 min.

Drying at 20 °CDrying at 60 °C

20 - 30 min.

Infrared (short wave)Infrared (medium wave)

4 min.5 - 10 min.

Sanding: orbital sander P150581-90 Guide CoatP240 body-filled area and old paintwork

Page 95: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information839-55

03/2014

Glasurit® Soft-Body Filler G / BF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: levelling of dents, fast drying, easy to sandProperties: High solids content; universally suitable for use on steel sheet, galvanised steel, aluminium; fast drying,

easy to sand.Remarks: • Mix body filler and hardener paste well (no marble effect). Do not exceed 3% of hardener (excess

peroxide will cause discoloration in the finish).

Application 839-55 Soft-body filler

Paint system

Mixing ratio 100% by weight 839-55

Hardener 3% by weight 948-36

Reducer

Potlife at 20 °C 5 min.

Drying at 20 °CDrying at 60 °C

15 min.

Infrared (short wave)Infrared (medium wave)

4 min.5 - 10 min.

Sanding: orbital sander P80 / P150 / P240

Page 96: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information839-70/70K

10/2011

Glasurit® Universal Body Filler G / BF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Coarse and fine body fillerProperties: High solids content; universally suitable for use on steel sheet, galvanised steel, aluminium; fast drying,

easy to sand, good adhesionRemarks: • Mix body filler and red hardener paste well before use (homogeneous colour, no marble effect).

• Do not exceed 3% of hardener.• Excess peroxide will cause discoloration in the finish.

Application 839-70 Coarse and fine body filler 839-70K Coarse and fine body filler

Paint system

Mixing ratio 100% by weight 839-70 (can) 100% by weight 839-70K (cartridge)

Hardener 2-3% by weight 948-36 948-52 addition of hardener depending onhardener cartridge

Reducer

Potlife at 20 °C 4 - 5 min. 4 - 5 min.

Drying at 20 °CDrying at 60 °C

20 - 30 min. 20 - 30 min.

Infrared (short wave)Infrared (medium wave)

4 in.5 - 10 min.

4 min.5 - 10 min.

Sanding: orbital sander P80/150581-90 Guide CoatP240 body-filled area and old paintwork

P80/150581-90 Guide CoatP240 body-filled area and old paintwork

Page 97: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information839-85

07/2015

Glasurit® Multi Brushing Body Filler G / BF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Coarse and fine body filler applied by brushingModelling of profiles and contoursMay also be used as fast polyester spray fillerUniversally applicable for use on steel, galvanised steel and aluminium without primer

Properties: High solids content, fast drying, easy to sandRemarks: • Mix body filler and red hardener paste well before use (homogeneous colour, no marble effect).

• Mix in plastic cup, apply with flat brush.• Clean with 352-10, -50 after use.• Do not apply more than 400 microns per coat; do not add more than 3% of hardener. Excess peroxide

will cause discoloration in the finish.• On poorly cured old paintwork and e-coated OEM parts, sand large area around damaged spots

down to the bare metal. Apply body filler to bare metal only.• Do not use brushing body filler on acid-treated surfaces or on surfaces primed with acid-catalysed

products (etch primers).

Page 98: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information839-85

07/2015

Glasurit® Multi Brushing Body Filler G / BF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application Brushing process Spraying process

Paint system

Mixing ratio 100% 839-85 100 % 839-85

Hardener 2-3 % 948-36 2-3 % 948-36

Reducer max. 4% 352-10, -50, if required max. 4% 352-10, -50

Potlife at 20 °C 5 min. 5 min.

Brushing 2-3 times

Gravity cupSpraying pressure

2 - 3 mm 2-3 bar (30-45 p.s.i.)

Drying at 20 °CDrying at 60 °C

30 min. 30 min.

Infrared (short wave)Infrared (medium wave)

5 – 7 min. 10 – 15 min.

5 – 7 min. 10 – 15 min.

Sanding: orbital sander P80581-90 Guide CoatP150 / P240

P80581-90 Guide CoatP150 / P240

Page 99: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information839-88

05/2014

Glasurit® Body Filler G / BF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Coarse and fine body fillerProperties: High solids content; universally suitable for refinishing: steel sheet, galvanised steel, aluminium; fast drying;

easy to sand; good adhesionRemarks: • Mix body filler and red hardener paste well before use (homogeneous colour, no marble effect).

• Do not exceed 3% of hardener.• Excess peroxide will cause discoloration in the finish.

Application Coarse and fine body filler 839-88

Paint system

Mixing ratio 100% by weight 839-88

Hardener 2 - 3% by weight 948-88

Reducer

Potlife at 20 °C 4 - 5 min.

Drying at 20 °CDrying at 60 °C

20 - 30 min.

Infrared (short wave)Infrared (medium wave)

4 min.5 - 10 min.

Sanding: orbital sander P80/150581-90 Guide CoatP240 for body-filled area and old paintwork

Page 100: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information839-90

10/2011

Glasurit® Plastic Body Filler G / BF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Flexible fine body filler for application to paintable plastics on cars, to cover smaller damages (scratches).Properties: Flexible, high solids content; universally suitable for use on all paintable plastics on cars, fast drying, easy

to sand, good adhesion.Remarks: • Mix body filler and red hardener paste well before use (homogeneous colour, no marble effect).

• Do not exceed 3% of hardener.• Excess peroxide will cause discoloration in the finish.

Application 839-90 fine body filler

Paint system S 3, S 3a

Mixing ratio 100% by weight 839-90

Hardener 2-3% by weight 948-36

Reducer

Potlife at 20 °C 4 - 5 min.

Drying at 20 °CDrying at 60 °C

25 – 35 min. 15 min.

Infrared (short wave)Infrared (medium wave)

8 min. 5 – 10 min.

Sanding: orbital sander P80/150581-90 Guide CoatP240/P320 body-filled area and old paintwork

Page 101: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information839-171

11/2019

Glasurit® UV Body Filler G / BF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)239: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 239 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Fine body fillerProperties: Universally applicable on steel, galvanised steel, aluminium, e-coated parts, old paintwork, and all coatable

plastic add-on parts.The high solids fine body filler convinces with fast drying ability, excellent sandability and good anti-corrosiveproperties. They are coupled with good finish qualities.Especially developed for the repair of small damages and scratches, to achieve a repaired surface withoutpores.

Remarks: • do not use in direct sunlight• do not expose to sunlight on storage

Application Fine body filler

Paint system S 3, S 3a, S 9.5, S 15, S15a

Mixing ratio The material is ready for use.

Film thickness max. 800 µm

UV drying 5 min. (UV-A -> min. 6 mW/cm²)By using LED lamps, the drying time can be reduced due to their higher intensity in the decisivewavelength range. This must be checked individually.

Sanding: orbital sander P80/150581-90 guide coatP240/320 putty area and old paintwork

Page 102: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information901-21

10/2011

Glasurit® Glass fibre body filler G / BF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Glass-fibre reinforced, tough and resilient polyester body filler for smaller areas rusted throughProperties: Repair of damaged GRP parts

Paint system

Mixing ratio 100 % 901-21

Hardener 2 –3 % 948-36

Reducer

Potlife at 20 °C 5 min.

Drying at 20 °CDrying at 60 °C

20 min.

Infrared (short wave)Infrared (medium wave)

4 min.5 - 10 min.

Sanding: orbital sander P 80 / P 150

Page 103: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information1006-26

08/2016

Glasurit® UP-Spray Filler grey G / BF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)249: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 249 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Fine body filler applied by sprayingProperties: High build, very safe to spray, can be sprayed in thick coatsRemarks: • Shelf life: 8 months (at 20°C)

• Do not wet sand 1006-26• Prime sand-throughs and bare metal with Glasurit 2K SF Primer 285-26• Do not apply on etch primer filler/wash primer (e.g. 283-150) or on substrates pre-treated with acid• Store in a cool place

Paint system S 1

Mixing ratio 1.4 kg 1006-26

Hardener 50 cc 948-2275 cc 948-22 below 15°C

Reducer max. 4% 352-10, -50, if required

Spray viscosityDIN 4 at 20°C

as supplied Potlife at 20°C: 25 – 30 min.

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:2.5 – 3.0 mm 2.5 – 3.0 bar

3 – 5 Film thickness: 200 – 300 µmNumber of spraycoats If a film thickness of > 300 µm is required, a second spray body filler layer can be applied without

intermediate sanding after having dried the first layer.

Drying at 20 °CDrying at 60 °C

3 – 4 h30 min.

Infrared (short wave)Infrared (medium wave)

10 min.15 – 20 min.

Sanding: orbital sander P150 pre-sanding581-90 Guide CoatP240 fine sanding

Page 104: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information183-30

08/2019

Glasurit® 1K Anti-corrosive Primer G / P

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)685: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 685 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer for automotive refinishingProperties: 1-pack primer supplied in an aerosol can

• Very good corrosion protection on steel, galvanised steel and aluminium• Weldable

Application Primer

Paint system

Spreading rate:

Shaking 2 min.

Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.

Number of spraycoats 1 - 2

Film thickness 15-20 microns

Flash-off at 20°C approx. 10 min.

Page 105: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information283-150

12/2016

Glasurit® Etch Primer Filler G / P

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c III)(780)760: The EU limit value for this product ( product category: IIB.c III ) in ready to use form is max 780 g/litre of VOC. The VOCcontent of this product is 760 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: PrimerProperties: Very good anti-corrosive propertiesRemarks: For steel, aluminium and galvanised steel.

Do not recoat with polyester body filler!Do not use under 176-72!Can be used as primer with 352-228 Glasurit Activator, too. See Technical Information 283-150 inchapter G / PF.Not recoatable with 90 Line!

Application Primer

Mixing ratio 1 : 1100% by vol. 283-150

Hardener 100% by vol. 352-230

Reducer

Potlife at 20 °C 7 days

Spray viscosityDIN 4 at 20°C

15 s

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 - 1.8 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.8 mm 2.0 bar

Number of spraycoats 1-2

Film thickness 10-15 µm

Flash-off at 20°C ca. 10 min.

Page 106: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-26

02/2016

Glasurit® 2K SF Primer G / P

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)520: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 520 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer for application under 1006-26.Properties: • Very good anti-corrosive properties

• Isolating primerRemarks: For steel, aluminium and galvanised steel.

Application Primer

Paint system S 1

Spreading rate: 400 m²/l at 1 µm

Mixing ratio 4 : 1 : 1 100% by vol.

285-26

Hardener 25% by vol. 929-26

Reducer 25% by vol. 352-50 /-91 /-216352-10/ -30/ -40

Spray viscosityDIN 4 at 20°C

18 – 22 s Potlife at 20°C: 3,5 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.7 – 1.9 mm2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.6 – 1.8 mm 2.0 bar

Number of spraycoats 1

Film thickness 20 – 25 µm

Drying at 60 °C 20 min.

Infrared (short wave) 11 min.

Page 107: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information934-10

08/2019

Glasurit® 1K Plastic Adhesion Primer G / P

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)688: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 688 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Adhesion primer for plastic partsProperties: Multi-purpose adhesion promoter supplied in an aerosol can, suitable for all paintable plastics on cars.

• Suitable filler surfacers: Glasurit® 285-* HS fillers / primer fillers*= Add Softface according to system S.3a

• GRP parts: no 934-10 required.

Application Primer

Paint system S 3a

Spreading rate:

Shaking 2 min.

Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.

Number of spraycoats 1 - 2

Film thickness 5-10 microns

Flash-off at 20°C approx. 15 min.

Page 108: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information151-130

09/2019

Glasurit® UV Primer filler, light grey G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)540: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 540 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer fillerProperties: Suitable for steel, galvanized steel, aluminium and plastics.

If plastic parts are primed with 934-10 Glasurit 1K Plastic Adhesion Primer, the product can be used on allcoatable plastics that are commonly used in the automotive industry.Good corrosion resistance, excellent topcoat holdout.

Remarks: • Film builds rapidly with this product, do not spray hiding.• Do not apply more than two coats.• Do not apply in direct sunlight.

Mixing ratio Material is ready for use.

Shaking Shake vigorously for 1 - 2 min. before use.

Spray viscosityDIN 4 at 20°C

18 - 20 s

Gravity cupSpraying pressure

HVLP gravity-feed spray gun 1.1 mm0.7 bar at the nozzle

Compliant gravity-feed spraygun:1.1 mm, 2.0 bar

Number of spraycoats Primer surfacer formetal:½ + 1

Film thickness:max. 120 µm

Primer surfacer forplastic:½ + 1

Film thickness:max. 80 µm

Flash-off at 20°C 20 s between spray coatsIf higher film builds on metallic substrates are necessary, a second layer 151-130 can be appliedwith intermediate sanding after having dried the first layer.151-130 appears transparent and should not be applied to achieve hiding power.With higher film builds a longer intermediate flash-off and a flash-off before drying isrecommended.

UV drying (UV-A > 6 mW/cm²)

5 min.By using LED lamps, the drying time can be reduced due to their higher intensity in the decisivewavelength range. This must be checked individually.

Sanding: wet P800

Sanding: orbital sander P400 - P500

Page 109: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information151-170

08/2018

Glasurit® UV Primer filler grey G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)540: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 540 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer fillerProperties: Suitable for steel, galvanized steel, aluminium and plastics.

If plastic parts are primed with 934-10 Glasurit 1K Plastic Adhesion Primer, the product can be used on allcoatable plastics that are commonly used in the automotive industry.Good corrosion resistance, excellent topcoat holdout.

Remarks: • Film builds rapidly with this product, do not spray hiding.• Do not apply more than two coats.• Do not apply in direct sunlight.

Mixing ratio Material is ready for use.

Shaking Shake vigorously for 1 - 2 min. before use.

Spray viscosityDIN 4 at 20°C

18 - 20 s

Gravity cupSpraying pressure

HVLP gravity-feed spray gun 1.1 mm0.7 bar at the nozzle

Compliant gravity-feed spraygun:1.1 mm, 2.0 bar

Number of spraycoats Primer surfacer formetal:½ + 1

Film thickness:max. 120 µm

Primer surfacer forplastic:½ + 1

Film thickness:max. 80 µm

Flash-off at 20°C 20 s between spray coatsIf higher film builds are necessary, a second layer 151-170 can be applied with intermediatesanding after having dried the first layer.151-170 appears transparent and should not be applied to achieve hiding power.With higher film builds a longer intermediate flash-off and a flash-off before drying isrecommended.

UV drying (UV-A > 6 mW/cm²)

5 min.By using LED lamps, the drying time can be reduced due to their higher intensity in the decisivewavelength range. This must be checked individually.

Sanding: wet P800

Sanding: orbital sander P400 - P500

Page 110: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information151-170 AE

08/2019

Glasurit® UV Primer filler grey aerosol can G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)655: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 655 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer fillerProperties: Suitable for steel, galvanized steel, aluminium and plastics.

If plastic parts are primed with 934-10 Glasurit 1K Plastic Adhesion Primer, the product can be used on allcoatable plastics that are commonly used in the automotive industry.Good corrosion resistance, excellent topcoat holdout.

Remarks: • Film builds rapidly with this product, do not spray hiding.• Do not apply more than two coats.• Do not apply in direct sunlight.

Mixing ratio Material is ready for use.

Shaking Shake vigorously for 1 - 2 min. before use.

Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.

Number of spraycoats Primer surfacer formetal:½ + 1

Film thickness:max. 120 µm

Primer surfacer forplastic:½ + 1

Film thickness:max. 80 µm

Flash-off at 20°C 20 s between spray coatsIf higher film builds are necessary, a second layer 151-170 AE can be applied with intermediatesanding after having dried the first layer.151-170 AE appears transparent and should not be applied to achieve hiding power.With higher film builds a longer intermediate flash-off and a flash-off before drying isrecommended.

UV drying (UV-A > 6 mW/cm²)

5 min.By using LED lamps, the drying time can be reduced due to their higher intensity in the decisivewavelength range. This must be checked individually.

Sanding: wet P800

Sanding: orbital sander P400 - P500

Page 111: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information151-190

09/2019

Glasurit® UV Primer filler, dark grey G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)540: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 540 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer fillerProperties: Suitable for steel, galvanized steel, aluminium and plastics.

If plastic parts are primed with 934-10 Glasurit 1K Plastic Adhesion Primer, the product can be used on allcoatable plastics that are commonly used in the automotive industry.Good corrosion resistance, excellent topcoat holdout.

Remarks: • Film builds rapidly with this product, do not spray hiding.• Do not apply more than two coats.• Do not apply in direct sunlight.

Mixing ratio Material is ready for use.

Shaking Shake vigorously for 1 - 2 min. before use.

Spray viscosityDIN 4 at 20°C

18 - 20 s

Gravity cupSpraying pressure

HVLP gravity-feed spray gun 1.1 mm0.7 bar at the nozzle

Compliant gravity-feed spraygun:1.1 mm, 2.0 bar

Number of spraycoats Primer surfacer formetal:½ + 1

Film thickness:max. 120 µm

Primer surfacer forplastic:½ + 1

Film thickness:max. 80 µm

Flash-off at 20°C 20 s between spray coatsIf higher film builds on metallic substrates are necessary, a second layer 151-190 can be appliedwith intermediate sanding after having dried the first layer.151-190 appears transparent and should not be applied to achieve hiding power.With higher film builds a longer intermediate flash-off and a flash-off before drying isrecommended.

UV drying (UV-A > 6 mW/cm²)

5 min.By using LED lamps, the drying time can be reduced due to their higher intensity in the decisivewavelength range. This must be checked individually.

Sanding: wet P800

Sanding: orbital sander P400 - P500

Page 112: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information176-72

08/2016

Glasurit® 1K Primer Filler G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)180: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Water-thinnable primer fillerSealer for poorly cured old paintworkSealer for TPA substratesCan be used as guide coat (1:1 with Glasurit® 93-E3)

Properties: Contains less than 5% organic solventsRemarks: • Minimum application temperature: 15°C.

• Drying heavily depends on temperature, humidity, air circulation and film thickness.• Immerse spraygun heads in water when not working with the gun.• Use 700-1 for re-cleaning of working tools.• Collect left-over paints and waste water, treat them with 700-7 Coagulating Powder and dispose of

them according to the relevant technical data sheets.• Shelf life: 18 months.

Page 113: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information176-72

08/2016

Glasurit® 1K Primer Filler G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)180: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Paint system

Spreading rate: 366 m²/l at 1 micron

Reducer + 10% 93-E3

Spray viscosityDIN 4 at 20°C

25 – 35 s Potlife at 20°C: 7 days

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.7 - 1.9 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.6 -1.8 mm 2.0 bar

Number of spraycoats 2

Film thickness 40 - 60 microns

Flash-off at 20°C approx. 5 min. between spraycoats, flash off until matt

Drying at 20 °CDrying at 60 °C

30 min. 2 h; temperature min. 20°C, humidity max. 50%30 min.

Infrared (short wave)Infrared (medium wave)

3 min. 50% + 5 min. 100% 15 – 20 min.

Sanding: manual P800

Sanding: orbital sander P400 - P500 clean again with Glasurit® 700-1 Cleaner

Page 114: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information183-70

08/2019

Glasurit® 1K Express Primer Filler lightgrey G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)743: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 743 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: 1K primer filler supplied in an aerosol can for use in automotive refinishing• Primer filler for minor sand-throughs to the bare metal• Corrosion protection product for use under Glasurit 285- primer fillers and filler surfacers (sanding

version)• Primer filler suitable for Spot-Repair

Properties: • Very good corrosion protection on steel, galvanised steel and aluminium• Fast drying• Good finish quality

Remarks:

1. Primer filler / corrosion protection product for use under Glasurit 285- primerfillers and filler surfacers (sanding version)

Application Primer filler Corrosion-protection product for useunder Glasurit 285- primer fillers and fillersurfacers (sanding version)

Paint system

Spreading rate

Shaking 2 min. 2 min.

Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.

Number of spraycoats 3 - 4 1 - 2

Film thickness 30-40 microns 15-20 microns

Flash-off at 20°C approx. 5 min. between spraycoats 10 min.

Drying at 20 °CDrying at 60 °C

1.5 – 2 hours30 min.

Infrared (short wave)Infrared (medium wave)

5 min. 50% 7 min.

Sanding: manual P800 or “ultrafine” sanding pad

Page 115: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information183-70

08/2019

Glasurit® 1K Express Primer Filler lightgrey G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)743: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 743 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

2. Primer filler in the Spot-Repair systemApplication Primer filler in the Spot-Repair system

Paint system

Spreading rate:

Shaking 2 min.

Number of spraycoats 3-4 coats, use spray head with a round spray jet

Film thickness 30-40 microns

Flash-off at 20°C until matt between spraycoats

Infrared (short wave)Infrared (medium wave)

5 min. 50% 7 min.

Sanding: manual P800 or “ultrafine” sanding pad

Page 116: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information183-90

08/2019

Glasurit® 1K Express Primer Filler darkgrey G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)695: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 695 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: 1K primer filler supplied in an aerosol can for use in automotive refinishing• Primer filler for minor sand-throughs to the bare metal• Corrosion protection product for use under Glasurit 285- primer fillers and filler surfacers (sanding

version)• Primer filler suitable for Spot-Repair

Properties: • Very good corrosion protection on steel, galvanised steel and aluminium• Fast drying• Good finish quality

Remarks:

1. Primer filler / corrosion protection product for use under Glasurit 285- primerfillers and filler surfacers (sanding version)

Application Primer filler Corrosion-protection product for useunder Glasurit 285- primer fillers and fillersurfacers (sanding version)

Paint system

Spreading rate

Shaking 2 min. 2 min.

Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.

Number of spraycoats 3 - 4 1 - 2

Film thickness 30-40 microns 15-20 microns

Flash-off at 20°C approx. 5 min. between spraycoats 10 min.

Drying at 20 °CDrying at 60 °C

1.5 – 2 hours30 min.

Infrared (short wave)Infrared (medium wave)

5 min. 50% 7 min.

Sanding: manual P800 or “ultrafine” sanding pad

Page 117: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information183-90

08/2019

Glasurit® 1K Express Primer Filler darkgrey G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)695: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 695 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

2. Primer filler in the Spot-Repair systemApplication Primer filler in the Spot-Repair system

Paint system

Spreading rate:

Shaking 2 min.

Number of spraycoats 3-4 coats, use spray head with a round spray jet

Film thickness 30-40 microns

Flash-off at 20°C until matt between spraycoats

Infrared (short wave)Infrared (medium wave)

5 min. 50% 7 min.

Sanding: manual P800 or “ultrafine” sanding pad

Page 118: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information283-150

12/2016

Glasurit® Etch Primer Filler G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c III)(780)760: The EU limit value for this product ( product category: IIB.c III ) in ready to use form is max 780 g/litre of VOC. The VOCcontent of this product is 760 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer / Primer fillerProperties: Very good anti-corrosive properties, easy and quick sandingRemarks: For steel, aluminium and galvanised steel.

Do not recoat with polyester body filler!Do not use under 176-72!Not recoatable with 90 Line.

Page 119: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information283-150

12/2016

Glasurit® Etch Primer Filler G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c III)(780)760: The EU limit value for this product ( product category: IIB.c III ) in ready to use form is max 780 g/litre of VOC. The VOCcontent of this product is 760 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application Primer filler Primer

Mixing ratio 2:1+10% 100% by vol. 283-150

1:1+30% 100% by vol. 283-150

Hardener 50% by vol. 352-228 100% by vol. 352-228

Reducer 10% by vol. 352-91/ -50/ -30/ -10 30% by vol. 352-91/ -50/ -30/ -10

Potlife at 20 °C 48 hours 48 hours

Spray viscosityDIN 4 at 20°C

16-17 s 14 s

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 - 1.8 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 –1.8 mm 2,0 bar

Number of spraycoats 4 1-2

Film thickness 30-35 µm 10-15 µm

Brushing 2 coats without thinner

Flash-off at 20°C approx. 10 min.

Drying at 20 °CDrying at 60 °C

60 min. 20 min.

Infrared (short wave)Infrared (medium wave)

3 min. 5 – 10 min.

Sanding P 800

Page 120: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-230

04/2019

Glasurit® Primer Filler Pro, white G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer filler / wet-on-wet fillerProperties: Suitable for steel, galvanized steel, aluminium, old paintwork and GRP / SMC

Good corrosion protection and weathering resistance, good finish qualityRemarks: • Use 581-90 Glasurit Guide Coat, black as guide coat (for a better sanding result).

• To create different shades of grey, 285-230 Glasurit Primer Filler Pro white and 285-290 black canbe mixed. (See Glasurit Filler Grey Shade Concept).

• No need to sand new e-coated parts.• Parts coated with 285-230 can be overcoated without intermediate sanding for up to 5 days• Clean the surface with 700-10 Glasurit Degreasing and cleaning agent before applying

285-230.• Minimum temperature for air drying: +15°C.

Page 121: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-230

04/2019

Glasurit® Primer Filler Pro, white G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application Primer Filler

Spreading rate m² / l at 1 µm

Mixing ratio 5 : 1 : 1 for metal100% by vol.

285-230

5 : 1 : 1 for plastics100% by vol.

285-230

Hardener 20% by vol. 929-58 20% by vol. 929-58

Reducer 20% by vol. 352-91, -50, -216, 352-30, -40, -10

20% by vol. 522-10

Spray viscosityDIN 4 at 20°C

18 – 20 s

Potlife at 20 °C 90 min

Gravity cupSpraying pressure

HVLP spray gun: 1.7 – 1.9 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed spray gun1.6 – 1.8 mm, 2.0 bar

Number of spraycoats ½ + 1

Film thickness 50 – 70 μm

Drying at 20 °CDrying at 60 °C

16 hfor 35 min

Infrared (short wave) 9 min (4 min. 60 °C, 5 min. 80 °C)

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 122: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-230

04/2019

Glasurit® Primer Filler Pro, white G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application Wet-on-Wet Fillerfor metal

Wet-on-Wet Fillerfor plastics

Spreading rate m² / l at 1 µm

Mixing ratio 4 : 1 : 1100% by vol.

285-230

4 : 1 : 1100% by vol.

285-230

Hardener 25% by vol. 929-58 25% by vol. 929-58

Reducer 25% by vol. 352-91, -50, -216, 352-30, -40, -10

25% by vol. 522-10

Spray viscosityDIN 4 at 20°C

15 – 20 s

Potlife at 20 °C 90 min

Gravity cupSpraying pressure

HVLP spray gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed spray gun1.3 – 1.4 mm, 2.0 bar

Number of spraycoats ½ + 1 = ½ x putty area / 1 x whole area Film thickness: app. 30 - 40 µm

Flash-off at 20°C 25 - 30 min

Page 123: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-230

04/2019

Glasurit® Primer Filler Pro, white G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application High-build primer filler

Spreading rate m²/l at 1 μm

Mixing ratio 5 : 1 : 1100% by vol.

285-230

Hardener 20% by vol. 929-58

Reducer 20% by vol. 352-91, -50, -216, 352-30, -40, -10

Spray viscosityDIN 4 at 20°C

18 – 20 s

Potlife at 20 °C 90 min

Gravity cupSpraying pressure

HVLP spray gun: 1.7 – 1.9 mm2.0 – 3.0 bar /0.7 bar at the nozzle

Compliant gravity-feed spray gun1.6 –1.8 mm 2.0 bar

Number of spraycoats ½ + 2

Film thickness 80 – 120 μm

Flash-off at 20°C -

Drying at 20 °CDrying at 60 °C

16 h45 min

Infrared (short wave) 15 min (4 min. 60 °C, 11 min. 80 °C)

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 124: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-270

04/2019

Glasurit® Primer Filler Pro, grey G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer filler / primer / wet-on-wet fillerProperties: Suitable for steel, galvanized steel, aluminium, old paintwork and GRP / SMC

Good corrosion protection and weathering resistance, good finish qualityAnti-corrosion and adhesion primer for above mentioned substrates in Glasurit paint systemsCan be applied under 285- Glasurit primer fillers and primers

Remarks: • Use 581-90 Glasurit Guide Coat, black as guide coat (for a better sanding result).• No need to sand new e-coated parts.• Parts coated with 285-270 can be overcoated without intermediate sanding for up to 5 days• Clean the surface with 700-10 Glasurit Degreasing and cleaning agent before applying

285-270.• Minimum temperature for air drying: +15°C.

Page 125: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-270

04/2019

Glasurit® Primer Filler Pro, grey G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application Primer Filler

Spreading rate m² / l at 1 µm

Mixing ratio 5 : 1 : 1 for metal100% by vol.

285-270

5 : 1 : 1 for plastics100% by vol.

285-270

Hardener 20% by vol. 929-58 20% by vol. 929-58

Reducer 20% by vol. 352-91, -50, -216352-30, -10, -40

20% by vol. 522-10

Spray viscosityDIN 4 at 20°C

18 – 20 s

Potlife at 20 °C 90 min

Gravity cupSpraying pressure

HVLP spray gun: 1.7 – 1.9 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed spray gun1.6 – 1.8 mm, 2.0 bar

Number of spraycoats ½ + 1

Film thickness 50 – 70 μm

Drying at 20 °CDrying at 60 °C

16 hfor 35 min

Infrared (short wave) 9 min (4 min 60 °C, 5 min 80 °C)

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 126: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-270

04/2019

Glasurit® Primer Filler Pro, grey G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application Wet-on-Wet Fillerfor metal

Wet-on-Wet Fillerfor plastics

Spreading rate m² / l at 1 µm

Mixing ratio 4 : 1 : 1100% by vol.

285-270

4 : 1 : 1100% by vol.

285-270

Hardener 25% by vol. 929-58 25% by vol. 929-58

Reducer 25% by vol. 352-91, -50, -216352-30, -10, -40

25% by vol. 522-10

Spray viscosityDIN 4 at 20°C

15 – 20 s

Potlife at 20 °C 90 min

Gravity cupSpraying pressure

HVLP spray gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed spray gun1.3 – 1.4 mm, 2.0 bar

Number of spraycoats ½ + 1 = ½ x putty area / 1 x whole area Film thickness: app. 30 - 40 µm

Flash-off at 20°C 25 - 30 min

Page 127: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-270

04/2019

Glasurit® Primer Filler Pro, grey G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application High-build primer filler Primer

Spreading rate m²/l at 1 μm

Mixing ratio 5 : 1 : 1100% by vol.

285-270

Hardener 20% by vol. 929-58

Reducer 20% by vol. 352-91, -50, -216352-30, -10, -40

Spray viscosityDIN 4 at 20°C

18 – 20 s

Potlife at 20 °C 90 min

Gravity cupSpraying pressure

HVLP spray gun: 1.7 – 1.9 mm2.0 – 3.0 bar /0.7 bar at the nozzleCompliant gravity-feed spray gun1.6 –1.8 mm 2.0 bar

HVLP spray gun: 1.3 – 1.7 mm2.0 – 3.0 bar / 0.7 bar at the nozzleCompliant gravity-feed spray gun1.3 – 1.7 mm 2.0 bar

Number of spraycoats ½ + 2 1 thin coat (covering)

Film thickness 80 – 120 μm 10 – 20 μm

Flash-off at 20°C - 10 – 15 min

Drying at 20 °CDrying at 60 °C

16 hfor 45 min

--

Infrared (short wave) 15 min (4 min 60 °C, 11 min 80 °C) -

Sanding: manual P800 -

Sanding: orbital sander P400 - P500 -

Page 128: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-290

04/2019

Glasurit® Primer Filler Pro, black G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer filler / wet-on-wet fillerProperties: Suitable for steel, galvanized steel, aluminium, old paintwork and GRP / SMC

Good corrosion protection and weathering resistance, good finish qualityRemarks: • Use 581-90 Glasurit Guide Coat, black as guide coat (for a better sanding result).

• To create different shades of grey, 285-230 Glasurit Primer Filler Pro white and 285-290 black canbe mixed. (See Glasurit Filler Grey Shade Concept).

• No need to sand new e-coated parts• Parts coated with 285-290 can be overcoated without intermediate sanding for up to 5 days• Clean the surface with 700-10 Glasurit Degreasing and cleaning agent before applying

285-290.• Minimum temperature for air drying: +15°C.

Page 129: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-290

04/2019

Glasurit® Primer Filler Pro, black G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application Primer Filler

Spreading rate m² / l at 1 µm

Mixing ratio 5 : 1 : 1 for metal100% by vol.

285-290

5 : 1 : 1 for plastic100% by vol.

285-290

Hardener 20% by vol. 929-58 20% by vol. 929-58

Reducer 20% by vol. 352-91, -50, -216352-30, -10, -40

20% by vol. 522-10

Spray viscosityDIN 4 at 20°C

18 – 20 s

Potlife at 20 °C 90 min

Gravity cupSpraying pressure

HVLP spray gun: 1.7 – 1.9 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed spray gun1.6 – 1.8 mm, 2.0 bar

Number of spraycoats ½ + 1

Film thickness 50 – 70 μm

Drying at 20 °CDrying at 60 °C

16 hfor 35 min

Infrared (short wave) 9 min (4 min 60 °C, 5 min 80 °C)

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 130: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-290

04/2019

Glasurit® Primer Filler Pro, black G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application Wet-on-Wet Fillerfor metal

Wet-on-Wet Fillerfor plastics

Spreading rate m² / l at 1 µm

Mixing ratio 4 : 1 : 1100% by vol.

285-290

4 : 1 : 1100% by vol.

285-290

Hardener 25% by vol. 929-58 25% by vol. 929-58

Reducer 25% by vol. 352-91, -50, -216352-30, -10, -40

25% by vol. 522-10

Spray viscosityDIN 4 at 20°C

15 – 20 s

Potlife at 20 °C 90 min

Gravity cupSpraying pressure

HVLP spray gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed spray gun1.3 – 1.4 mm, 2.0 bar

Number of spraycoats ½ + 1 = ½ x putty area / 1 x whole area Film thickness: app. 30 - 40 µm

Flash-off at 20°C 25 - 30 min

Page 131: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-290

04/2019

Glasurit® Primer Filler Pro, black G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application High-build primer filler

Spreading rate m²/l at 1 μm

Mixing ratio 5 : 1 : 1100% by vol.

285-290

Hardener 20% by vol. 929-58

Reducer 20% by vol. 352-91, -50, -216352-30, -10, -40

Spray viscosityDIN 4 at 20°C

18 – 20 s

Potlife at 20 °C 90 min

Gravity cupSpraying pressure

HVLP spray gun: 1.7 – 1.9 mm2.0 – 3.0 bar /0.7 bar at the nozzle

Compliant gravity-feed spray gun1.6 –1.8 mm 2.0 bar

Number of spraycoats ½ + 2

Film thickness 80 – 120 μm

Flash-off at 20°C -

Drying at 20 °CDrying at 60 °C

16 h45 min

Infrared (short wave) 15 min (4 min 60 °C, 11 min 80 °C)

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 132: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-505

11/2018

Glasurit® HS Primer Filler, grey G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Efficient HS primer filler with excellent wet and dry sanding propertiesProperties: High solids content; fast drying; good corrosion protection, good weathering resistance and good finishRemarks: • 285-505 corresponds to grey shade of 285-.../03

• 285-505 can be mixed with Glasurit HS Primer Fillers 285-555 black and 285-655 white to achievedifferent grey shades.

• You can add 523-15 Glasurit Racing Additive (see technical data sheet of 523-15) to accelerate thedrying process of 285-505

• Use 581-90 as guide coat (for a better sanding result)

Page 133: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-505

11/2018

Glasurit® HS Primer Filler, grey G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Paint system RATIO Aqua, RATIO HS

Spreading rate: 425 m²/l at 1 µm

Mixing ratio 4 : 1 : 1 100 % by vol.

285-505

Hardener 25 % by vol. 929-55, -56

Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40

Spray viscosityDIN 4 at 20°C

18 – 22 s Potlife 20°C 1 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.6 – 1.8 mm 2.0 bar

Number of spraycoats 2Flash-off between spraycoats until mat, no flash-off before drying.

Film thickness 50 – 70 µm

Drying at 20 °CDrying at 60 °C

3 h 20 min.

Infrared (short wave)Infrared (medium wave)

9 min. 10 – 15 min.

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 134: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-555

11/2018

Glasurit® HS Primer Filler, black G / GF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Efficient HS primer filler with excellent wet and dry sanding propertiesProperties: High solids content; fast drying; good corrosion protection, good weathering resistance and good finishRemarks: • 285-555 corresponds to grey shade of 285-.../00

• 285-555 can be mixed with Glasurit HS Primer Fillers 285-505 grey and 285-655 white to achievedifferent grey shades.

• You can add 523-15 Glasurit Racing Additive (see technical data sheet of 523-15) to accelerate thedrying process of 285-555

Paint system RATIO Aqua, RATIO HS

Spreading rate: 425 m²/l at 1 µm

Mixing ratio 4 : 1 : 1 100 % by vol.

285-555

Hardener 25 % by vol. 929-55, -56

Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40

Spray viscosityDIN 4 at 20°C

18 – 22 s Potlife 20°C 1 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.6 – 1.8 mm 2.0 bar

Number of spraycoats 2Flash-off between spraycoats until mat, no flash-off before drying.

Film thickness 50 – 70 µm

Drying at 20 °CDrying at 60 °C

3 h 20 min.

Infrared (short wave)Infrared (medium wave)

9 min. 10 – 15 min.

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 135: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-655

11/2018

Glasurit® HS Primer Filler, white G / GF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Efficient HS primer filler with excellent wet and dry sanding propertiesProperties: High solids content; fast drying; good corrosion protection, good weathering resistance and good finishRemarks: • 285-655 corresponds to grey shade of 285-.../07

• 285-655 can be mixed with Glasurit HS Primer Fillers 285-505 grey and 285-555 black to achievedifferent grey shades.

• You can add 523-15 Glasurit Racing Additive (see technical data sheet of 523-15) to accelerate thedrying process of 285-655

• Use 581-90 as guide coat (for a better sanding result)

Page 136: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-655

11/2018

Glasurit® HS Primer Filler, white G / GF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Paint system RATIO Aqua, RATIO HS

Spreading rate: 425 m²/l at 1 µm

Mixing ratio 4 : 1 : 1 100 % by vol.

285-655

Hardener 25 % by vol. 929-55, -56

Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40

Spray viscosityDIN 4 at 20°C

18 – 22 s Potlife 20°C 1 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.6 – 1.8 mm; 2.0 bar

Number of spraycoats 2Flash-off between spraycoats until mat, no flash-off before drying.

Film thickness 50 – 70 µm

Drying at 20 °CDrying at 60 °C

3 h 20 min.

Infrared (short wave)Infrared (medium wave)

9 min. 10 – 15 min.

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 137: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-700

02/2016

Glasurit® Primer Filler G / GF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer fillerProperties: excellent spray ability, sagging resistance and filling properties

wet and dry sanding propertiesRemarks: • Use 581-90 as guide coat (for a better sanding result)

• 285-700 can be mixed with Glasurit 523-15 Racing Additive to reduce the drying time (to 15 min at60°C, 1.5h at 20°C or 6 min with short-wave infrared). Please observe that the mixture has a potlifeof only 20 min at 20°C and can only be used for applying film thicknesses of 50-70 µm.

Paint system

Spreading rate: 425 m²/l at 1 µm

Mixing ratio 4 : 1 : 1 100 % by vol.

285-700

Hardener 25 % by vol. 929-55, -56

Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40

Spray viscosityDIN 4 at 20°C

20 - 24 s Potlife 20°C 1 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.6 – 1.8 mm; 2.0 bar

Number of spraycoats 2

Film thickness 50 – 70 µm

Drying at 20 °CDrying at 60 °C

3 h 30 min.

Infrared (short wave)Infrared (medium wave)

9 min. 10 – 15 min.

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 138: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-700

02/2016

Glasurit® Primer Filler G / GF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Alternative: application of high film buildsPaint system

Spreading rate Spreading rate: 425 m²/l at 1 µm

Mixing ratio 4 : 1 : 1 100 % by vol.

285-700

Hardener 25 % by vol. 929-55, -56

Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40

Spray viscosityDIN 4 at 20°C

20 - 24 s Potlife 20°C 1 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.6 – 1.8 mm; 2.0 bar

Number of spraycoats 3 - 4

Film thickness 100 - 200 µm

Drying at 20 °CDrying at 60 °C

16 h40 min.

Sanding: wet P800

Sanding: orbital sander P400 - P500

Page 139: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-730

02/2016

Glasurit® Primer Filler, white G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer fillerProperties: excellent spray ability, sagging resistance and filling properties

wet and dry sanding propertiesRemarks: • Use Glasurit 581-90 Guide Coat, black as guide coat (for a better sanding result)

• 285-730 can be mixed with Glasurit 285-790 Primer Filler to achieve different grey shades• 285-730 can be mixed with Glasurit 523-15 Racing Additive to reduce the drying time (to 15 min at

60°C, 1.5h at 20°C or 6 min with short-wave infrared). Please observe that the mixture has a potlifeof only 20 min at 20°C and can only be used for applying film thicknesses of 50-70 μm.

Page 140: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-730

02/2016

Glasurit® Primer Filler, white G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Paint system

Spreading rate: 425 m²/l at 1 µm

Mixing ratio 4 : 1 : 1 100 % by vol.

285-730

Hardener 25 % by vol. 929-55, -56

Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40

Spray viscosityDIN 4 at 20°C

20 - 24 s Potlife 20°C 1 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.6 – 1.8 mm; 2.0 bar

Number of spraycoats 2

Film thickness 50 – 70 µm

Drying at 20 °CDrying at 60 °C

3 h 30 min.

Infrared (short wave)Infrared (medium wave)

8 min. 10 – 15 min.

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 141: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-730

02/2016

Glasurit® Primer Filler, white G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Alternative: application of high film buildsPaint system

Spreading rate: 425 m²/l at 1 µm

Mixing ratio 4 : 1 : 1 100 % by vol. 285

285-730

Hardener 25 % by vol. 929-55, -56

Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40

Spray viscosityDIN 4 at 20°C

20 - 24 s Potlife 20°C 1 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.6 – 1.8 mm; 2.0 bar

Number of spraycoats 3 - 4

Film thickness 100 - 200 µm

Drying at 20 °CDrying at 60 °C

16 h40 min.

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 142: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-790

02/2016

Glasurit® Primer Filler, black G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer filler withProperties: excellent spray ability, sagging resistance and filling properties

wet and dry sanding propertiesRemarks: • 285-790 can be mixed with Glasurit Primer Filler 285-730 to achieve different grey shades

• 285-790 can be mixed with Glasurit 523-15 Racing Additive to reduce the drying time (to 15 min at60°C, 1.5h at 20°C or 6 min with short-wave infrared). Please observe that the mixture has a potlifeof only 20 min at 20°C and can only be used for applying film thicknesses of 50-70 μm.

Paint system

Spreading rate: 425 m²/l at 1 µm

Mixing ratio 4 : 1 : 1 100 % by vol.

285-790

Hardener 25 % by vol. 929-55, -56

Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40

Spray viscosityDIN 4 at 20°C

20 - 24 s Potlife 20°C 1 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.6 – 1.8 mm, 2.0 bar

Number of spraycoats 2

Film thickness 50 – 70 µm

Drying at 20 °CDrying at 60 °C

3 h 30 min.

Infrared (short wave)Infrared (medium wave)

8 min. 10 – 15 min.

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 143: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-790

02/2016

Glasurit® Primer Filler, black G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Alternative: application of high film buildsPaint system

Spreading rate: 425 m²/l at 1 µm

Mixing ratio 4 : 1 : 1 100 % by vol.

285-790

Hardener 25 % by vol. 929-55, -56

Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40

Spray viscosityDIN 4 at 20°C

20 - 24 s Potlife 20°C 1 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.6 – 1.8 mm, 2.0 bar

Number of spraycoats 3 - 4

Film thickness 100 - 200 µm

Drying at 20 °CDrying at 60 °C

16 h40 min.

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 144: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information801-72

02/2016

Glasurit® Epoxy Primer Filler grey G / GF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)459: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 459 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer filler/ wet-on-wet primer filler /adhesion promoterProperties: Good corrosion protection, high build, good finish, rub-resistant with Glasurit® 541-5 Wax and Silicone

RemoverRemarks: • Can be tinted with max. 10% of 568-408 CV Primer Tinting Paste, black (mixture code: 801-72G)

• Minimum temperature for air drying: +15°C.• Best possible finish if 801-72 is force-dried.• When being used as adhesion promoter, 801-72 can be filled with Glasurit® 839- knifing fillers after

3 hours at 20°C

Page 145: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information801-72

02/2016

Glasurit® Epoxy Primer Filler grey G / GF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)459: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 459 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

1. Primer FillerApplication Primer filler

Paint system

Spreading rate: 425 m²/l at 1 µm

Mixing ratio 4 : 1 : 1 100% by vol.

801-72

Hardener 965-60 965-60

Reducer 25% by vol. 352-91, -216352-30, -40

Spray viscosityDIN 4 at 20°C

18-20 s Potlife at 20 °C: 8 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.7 - 1.9 mm2.0 – 3.0 bar, 0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.6 -1.8 mm 2.0 bar

Number of spraycoats 2 Film thickness: 40-50 µm

Drying at 20 °CDrying at 60 °C

8 hours30 min.

Infrared (short wave)Infrared (medium wave)

11 min. 10 – 15 min.

Sanding P800

Sanding: orbital sander P400 - P500

Page 146: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information801-72

02/2016

Glasurit® Epoxy Primer Filler grey G / GF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)459: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 459 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

2. Wet-on-wet primer / adhesion primerApplication wet on wet surfacer Adhesion primer

Paint system

Spreading rate 425 m²/l at 1 µm 425 m²/l at 1 µm

Mixing ratio 4 : 1 : 1 100% by vol. 801-72

4 : 1 : 1 100% by vol. 801-72

Hardener 25% by vol. 965-60 25% by vol. 965-60

Reducer 25% by vol. 352-216, -91352-30, -40

25% by vol. 352-216, -91352-30, -40

Potlife at 20 °C 8 hours 8 hours

Spray viscosityDIN 4 at 20°C

18 - 20 s 18 - 20 s

Gravity cupSpraying pressure

HVLP gravity-feed spray gun: 1.3 mm2.0 - 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 - 1.4 mm 2.0 bar

Number of spraycoats ½ + 1 1

Film thickness 25-35 µm 15-20 µm

Flash-off at 20°C 20 min. 10 - 20 min.

Page 147: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information934-70

02/2016

Glasurit® 2K Plastic Primer Filler G / PF

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Primer and primer filler for the economical repair of all paintable plastics on carsProperties: Good adhesion on all paintable plastics used in car production. Suitable for use as an adhesion promoter

in three stage systems and also as a primer filler under Glasurit topcoat systemsRemarks: • 30 minutes of forced drying at 60°C are necessary when the product is used as a sanding filler.

Primer Filler Primer

Paint system S 3 S 3a

Spreading rate:

Mixing ratio 4 : 1 :1 100% by vol.

934-70

Hardener 25% by vol. 929-56

Reducer 25% by vol. 352-50 /-91352-30, -40

Spray viscosityDIN 4 at 20°C

17-19 s Potlife at 20°C 3.5 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats ½ + 1 coat 1 coat

Film thickness 30 - 40 µm ca. 20 µm

Flash-off at 20°C 20 min. 20 min.

Page 148: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information185-66

08/2019

Glasurit® 1K Filler G / F

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)673: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 673 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: 1K Filler supplied in an aerosol can for use in automotive refinishing, available in the gray shade variants00, 02, 05 and 07.• Filler for sand-throughs• Filler suitable for spot repair

Properties: • Can be used on old paintwork and sand-throughs.Remarks: Filler with coloring properties. Sand-throughs to the bare metal must be primed before the use of 185-66.

Application Filler

Paint system

Shaking 2 min.

Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.

Number of spraycoats 1 - 2

Film thickness 15 - 30 µm

Flash-off at 20°C approx. 5 - 10 min. between spraycoats

Drying at 20 °CDrying at 60 °C

1 h30 min.

Page 149: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-0

02/2016

Glasurit® HS Transparent Sealer G / F

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)525: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 525 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Adhesion promoter (refinish and sign-writing), sealer (body filler patches, covering of sanding scratches)Properties: No sanding before topcoat or basecoat application; efficient use, safe application; no overspray visible in

door rebate as filler is transparentRemarks: • If mixed with 522-10 Glasurit Plastic Additive, the product can be used on all coatable plastics that

are commonly used in the automotive industry.• Clean with 352-50 in case of sign-writing.• 285-0 does not flow under the sign-writing film.• Select hardener and thinner according to ambient temperature and size of object to be painted.

Application Adhesion primer / Sealer

Paint system

Spreading rate 378 m²/l at 1 µm

Mixing ratio 3 : 1 : 1100% by vol.

285-0

Hardener 33% by vol. 929-56, -55

Reducer 33% by vol. 352-91, -50, -216352-30, -10, -40

Potlife at 20 °C 3 hours

Spray viscosityDIN 4 at 20°C

14-18 s

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 1 - 2

Film thickness 20 – 30 µm

Flash-off at 20°C 15 - 20 min

Page 150: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-31

02/2016

Glasurit® HS VOC Non-Sanding Filler,light grey G / F

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)530: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 530 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Wet-on-wet surfacer for economical repairsProperties: No sanding and no drying times; very safe to spray; good finish, good weathering resistanceRemarks: • Before filler application: fine sand body-filled areas and old paintwork with P320 (dry). Use 581-90

Guide Coat.• No need to sand new e-coated parts• Prime sand-throughs with 283-150 Glasurit® etch primer filler.• If mixed with 522-10 Glasurit Plastic Additive, the product can be used on all coatable plastics that

are commonly used in the automotive industry.• Parts coated with 285-31 can be overcoated without intermediate sanding for up to 5 days

Paint system S 4

Spreading rate: 331 m²/l at 1 µm

Mixing ratio 3 : 1 : 1 100% by vol.

285-31

Hardener 33% by vol. 929-56, -55

Reducer 33% by vol. 352-91/-216352-30, -40

Spray viscosityDIN 4 at 20°C

16-19 s Potlife at 20°C: 2 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 (one on body-filled area and one on entiresurface to be painted)

Film thickness: approx. 20-35 µm

Flash-off at 20°C 10 min. solids / 15-20 min. topcoat/basecoat metallics (matt)

Page 151: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-38

02/2016

Glasurit® HS VOC Non-Sanding Filler,white G / F

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)530: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 530 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Wet-on-wet surfacer for economical repairsProperties: No sanding and no drying times; very safe to spray; good finish, good weathering resistance

To use in every mixing ratio with 285-49 Glasurit Non-Sanding Filler VOC black, to get different grey colors.Remarks: • Before filler application: fine sand body-filled areas and old paintwork with P320 (dry). Use 581-90

Guide Coat.• No need to sand new e-coated parts• Prime sand-throughs with 283-150 Glasurit® etch primer filler.• If mixed with 522-10 Glasurit Plastic Additive, the product can be used on all coatable plastics that

are commonly used in the automotive industry• Parts coated with 285-38 can be overcoated without intermediate sanding for up to 5 days

Paint system S 4

Spreading rate: 331 m²/l at 1 µm

Mixing ratio 3 : 1 : 1 100% by vol.

285-38

Hardener 33% by vol. 929-56, -55

Reducer 33% by vol. 352-91/-216352-30, -40

Spray viscosityDIN 4 at 20°C

16-19 s Potlife at 20°C: 2 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 (one on body-filled area and one on entiresurface to be painted)

Film thickness: approx. 20-35 µm

Flash-off at 20°C 10 min. solids / 15-20 min. topcoat / basecoat metallics (matt)

Page 152: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-49

02/2016

Glasurit® HS VOC Non-Sanding Filler,black G / F

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)535: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 535 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Wet-on-wet surfacer for economical repairsProperties: No sanding and no drying times; very safe to spray; good finish, good weathering resistance

To use in every mixing ratio with 285-38 Glasurit Non-Sanding Filler VOC white, to get different grey colors.Remarks: • Before filler application: fine sand body-filled areas and old paintwork with P320 (dry). Use 581-90

Glasurit Guide Coat• No need to sand new e-coated parts• Prime sand-throughs with 283-150 Glasurit etch primer filler• If mixed with 522-10 Glasurit Plastic Additive, the product can be used on all coatable plastics that

are commonly used in the automotive industry.• Parts coated with 285-49 can be overcoated without intermediate sanding for up to 5 days

Paint system S 4

Spreading rate: 331 m²/l at 1 µm

Mixing ratio 3 : 1 : 1 100% by vol.

285-49

Hardener 33% by vol. 929-56, -55

Reducer 33% by vol. 352-91/-216352-30, -40

Spray viscosityDIN 4 at 20°C

16-19 s Potlife at 20°C: 2 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 (one on body-filled area and one on entiresurface to be painted)

Film thickness: approx. 20-35 microns

Flash-off at 20°C 10 min. solids / 15-20 min. topcoat / basecoat metallics (matt)

Page 153: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-95

02/2016

Glasurit® HS VOC Tintable Filler,transparent G / F

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)530: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 530 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Transparent filler component which, on tinting with Glasurit® 22 Line HS 2K Topcoat VOC, is used as acoloured filler. Suitable as a sanding filler or wet-on-wet surfacer.Use with colours that have poor hiding power, in the plastics finishing system (S. 3 / 3a), or as a colouredfiller for areas exposed to stone chipping.

Properties: • Helps to save labour and topcoat material.• Helps to use up rests of Glasurit 22 Line HS 2K Topcoat (VOC)

Remarks: • When you use 285-95 as a wet-on-wet surfacer, the only suitable primer is 285-270 Glasurit®Primer Filler Pro grey.

• Never use 22 Line mixing bases on their own, be sure to mix them with 522-M0 or 522-M0/35 first!The mixture of Glasurit® 285-95 HS VOC Tintable Filler with Glasurit® 22 Line VOC Topcoat mustbe stirred immediately!

• The filler can also be used to finish plastics according to System S 3a if Glasurit 522-111 SoftfaceAdditive is added to mixture A or B, at a ratio of 4:1 or 2:1 by volume or according to System S 3if Glasurit 522-10 Plastic Additive is added

Page 154: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-95

02/2016

Glasurit® HS VOC Tintable Filler,transparent G / F

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)530: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 530 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

1. Sanding fillerApplication Sanding filler

Paint system

Spreading rate: 439 m²/l at 1 µm

Mixing ratio Step 1 (A)2 : 1100% by vol. 285-9550% by vol. 22 Line VOC

Step 24 : 1 : 1100% by vol. mixture (A)

Hardener 25% by vol. 929-56, -55

Reducer 25% by vol.

352-91/-50/-216352-30, -10, -40

Spray viscosityDIN 4 at 20°C

18 - 20 s Potlife at 20°C: 1 hour

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.7 - 1.9 mm2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.6 -1.8 mm 2.0 bar

Number of spraycoats 2 Film thickness: 40-60 µm

Drying at 20 °CDrying at 60 °C

4 hours40 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

Sanding P800

Sanding: orbital sander P400 - P500 (only after drying over night or for 40 min. at 60°C)

Page 155: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-95

02/2016

Glasurit® HS VOC Tintable Filler,transparent G / F

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)530: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 530 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

2. Wet-on-wet surfacerPaint system

Spreading rate: 423 m²/l at 1 µm

Mixing ratio Step 1 (B)1 : 1100% by vol. 285-95100% by vol. 22 Line VOC

Step 23 : 1 : 1100% by vol. mixture (B)

Hardener 33% by vol. 929-56, -55

Reducer 33% by vol. 352-91/-216352-30, -40

Spray viscosityDIN 4 at 20°C

14 - 18 s Potlife at 20°C: 2 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 (one on body-filled area and one on entiresurface to be painted)

Film thickness: approx. 30 µm

Flash-off at 20°C 15 - 20 min.

Page 156: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information285-888

01/2015

Glasurit® Filler VOC grey G / F

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Two-pack acrylic filler to be used as sanding filler or high-build primerProperties: Very safe to spray and good dry and wet sanding propertiesRemarks: • Prime larger bare metal sand-throughs with Glasurit 283-150 Etch Primer Filler

• Use 581-90 as guide coat (for a better sanding result).• Use Glasurit 929-88 Hardener and Glasurit 352-88 Reducer

Application Sanding filler High-build primer

Paint system

Spreading rate 375 m²/l at 1 μm

Mixing ratio 4 : 1 : 1100% by vol. 285-888

4 : 1 : 1100% by vol. 285-888

Hardener 25% by vol. 929-88 25% by vol. 929-88

Reducer 25% by vol. 352-88 25% by vol. 352-88

Spray viscosityDIN 4 at 20°C

18 - 22 s Potlife at :20°C 1 h 18 – 22 s Potlife at 20°C: 1 h

Gravity cupSpraying pressure

HVLP spraygun: 1.7 – 1.9 mm2.0 - 3.0 bar/0.7 bar at the nozzle

Compliant gravity-feed spraygun1.6 – 1.8 mm, 2.0 bar

Number of spraycoats 2 50 – 70 μm 3 – 4 max. 150 μm

Drying at 20 °CDrying at 60 °C

4 h30 min

8 h40 min

Infrared (short wave)Infrared (medium wave)

8 min10 - 15 min

8 min10 - 15 min

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 157: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information22- VOC

04/2016

22 Line Glasurit® HS 2K Topcoat VOC G / T

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Direct gloss HS solid-colour topcoatProperties: High solids content; efficient; outstanding weathering resistance, yellowing resistance, hardness; very good

curing; very good gloss and buildRemarks: • Select reducers according to temperature and size of object.

• Do not use mixing bases on their own, but always with 522-MC35 Mixing Clear (4:1)!

Paint system S 10

Spreading rate: 475 m²/l at 1 µm

Mixing ratio Weight in according to mixing formula.2 : 1 + 10%, use mixing stick100% by vol. 22 Line VOC

Hardener 50% by vol. 929-33, -31, -34

Reducer 10% by vol. 352-91 / -50 / -21610% by vol 352-30 / -10 / -40

Spray viscosityDIN 4 at 20°C

approx. 20-24 s Potlife at 20°C: 2-3 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

2 Film thickness: 50-70 µm

Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)

Film thickness: approx. 50 µm

Flash-off at 20°C approx. 5 minutes after each spray coat

Drying at 20 °CDrying at 60 °C

8 hours30 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

Page 158: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information22- VOC MC600

05/2018

22 Line Glasurit® HS 2K Topcoat VOCMC600 G / T

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Direct gloss HS solid-colour topcoatProperties: High solids content; efficient; outstanding weathering resistance, yellowing resistance, hardness; very good

curing; very good gloss and buildRemarks: • Select reducers according to temperature and size of object.

• Do not use mixing bases on their own, but always with 522-MC600 Mixing Clear (3:1)!

Paint system S 10

Spreading rate: 475 m²/l at 1 µm

Mixing ratio Weight in according to mixing formula.3 : 1 : 1100% by vol. 22 Line VOC MC600

Hardener 33% by vol. 929-61, -63, -64

Reducer 33% by vol 352-30 / -10 / -40

Spray viscosityDIN 4 at 20°C

approx. 18 - 22 s Potlife at 20°C: 2 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

2 Film thickness: 50-70 µm

Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)

Film thickness: approx. 50 µm

Flash-off at 20°C approx. 5 minutes after each spray coat

Drying at 20 °CDrying at 60 °C

8 hours30 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

Page 159: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information22- matt

11/2017

Glasurit® 22 Line HS 2K Topcoat, mat,Glasurit® 22 Line HS 2K Topcoat 22-1250-M

G / T

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Mat direct gloss HS solid-colour topcoatProperties: High solids content; efficient; outstanding weathering resistance, yellowing resistance and hardness; very

good curing; very good buildRemarks: • Select hardener according to ambient temperature and size of object to be painted.

• Also for use on plastics, without the need to add Glasurit 522-111 Softface Additive.• Do not mix with 522-M 0 and 522-MC 35 Mixing Clear or 22 VOC MC600.• Prepare only the quantity of paint that will be used the same day because the gloss level may change

when the mixture is stored!Stir immediately after adding 522-322 HS Matting Agent!

Page 160: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information22- matt

11/2017

Glasurit® 22 Line HS 2K Topcoat, mat,Glasurit® 22 Line HS 2K Topcoat 22-1250-M

G / T

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application Glasurit 22 Line HS 2K Topcoat / 22-1250-M rallye black mat

Step 1:Mixing ratio

Example: blackmatt100% by weight 22-1250-M silk-matt100% by weight 22-M 26 black100% by weight 522-322satin-gloss100% by weight 22-M 26 black70% by weight 522-322semi-bright100% by weight 22-M 26 black40% by weight 522-322

Example: whitematt100% by weight 22-M 60 white70% by weight 522-322silk-matt100% by weight 22-M 60 white40% by weight 522-322satin-gloss100% by weight 22-M 60 white30% by weight 522-322semi-bright100% by weight 22-M 60 white20% by weight 522-322

Step 2:Mixing ratio

2 : 1 + 10%100% by vol.

use mixing stickmixture of 22 Line +522-322 or 22-1250-M(Factory pack)

3 : 1 : 1100% by vol.

use mixing stickmixture of 22 Line +522-322 or 22-1250-M(Factory pack)

Hardener 50% by vol. 929-93 / -91 / -94Glasurit HS TopcoatHardeners929-33 / -31 /-34 Glasurit VOCHardeners

33% by vol. 929-61, -63, -64Glasurit VOCHardeners

Reducer 10% by vol. 352-91 / -50 / -216352-30, -10, -40

33% by vol. 352-10, -30, -40

Spray viscosityDIN 4 at 20°C

approx. 20 – 24 s Potlife 20°C 1 - 2 h

Gravity cupSpraying pressure

HVLP spraygun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed spraygun:1.3 – 1.4 mm, 2.0 bar

Number of spraycoats 2 Film thickness 50 – 70 μm

Flash-off at 20°C Flash off until matt after each spraycoat and before baking.

Drying at 20 °CDrying at 60 °C

8 h30 min.

Page 161: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information22- matt

11/2017

Glasurit® 22 Line HS 2K Topcoat, mat,Glasurit® 22 Line HS 2K Topcoat 22-1250-M

G / T

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Page 162: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information90-

05/2017

90 Line Glasurit® Basecoat G / T

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Metallic and solid-colour basecoat/clearcoat finishing. Wet-on-wet process with Glasurit 923- Clear.Properties: Very good hiding power, high efficiency.

Water-thinnable, less than 10% organic solvents.Remarks: • Mixing formulas with 90-M4 and mixing bases are available to cover the whole range of colours

needed in automotive refinishing.• At rather high temperatures or when refinishing large surfaces, it is possible to replace 90-M4 by 90-

M4 slow, while replacing 93-E3 Adjusting base by 93-E3 slow at the same time.• Mixtures will keep for up to 6 months when stored in plastic containers or cans coated inside.• Use of 93-IC 330 if recommended by car manufacturers (see Technical Information).• Flash-off times can be reduced significantly by using appropriate air blow equipment.• Flash-off time before application of 923- Clear: 2-3 min. (until surface is mat).• When using white colors with high spray viscosity the mixing ratio can be changed to 100 : 80.

Page 163: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information90-

05/2017

90 Line Glasurit® Basecoat G / T

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Paint system RATIO Aqua

Spreading rate: 130 m²/l at 1 µm

Mixing ratio 2 : 1100% by vol. 90 Line Metallics/Solids (acc. to mixing formula)

Reducer 50% by vol. 93-E3 Adjusting Base *(stir IMMEDIATELY after having added adjusting base) *When using 90-M4 slow in the mixing formula, 93-E3 slow must also be used.

Spray viscosityDIN 4 at 20°C

approx. 18-24 s

Gravity cupSpraying pressure

HVLP gun: 1.3 mm2.0-3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed gun1.3-1.4 mm, 2.0 bar

Number of spraycoats 2 (spray to cover) + ½ to match the effect Film thickness: 10-15 µm

Flash-off at 20°C Approx. 5 min. after each spraycoat.

Intermediate dryingDrying at 20°CBlow dry with Dry Jet

Flash off until mat after each spraycoat.

Sanding Remove dust nibs by dry sanding; gently fade out applying mist coat afterwards.

Page 164: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information90-

10/2011

Glasurit® Basecoat90- Limited Edition90- Magic Collection

G / T

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: 90 Line basecoat/clearcoat finishes that can only be reproduced with rarely used pigments. These rarelyused pigments are not available as a mixing base for the mixing machine. The colours are only availableas ready-mixed colours from the respective business partner.

Properties: • Special-colour finishes that can only be reproduced with rarely used pigments.• “Glasurit Magic Collection” colours to create special colour effects.

Remarks: • Flash-off times can be reduced significantly by using appropriate air blow equipment.• Flash-off time before application of 923- Clear: 2 - 3 min. (until surface is mat).

Paint system

Step 1 Please search the colour database for the colour code to check whether a specific ground coatcolour is required for “Step 1” to reproduce the desired colour.

Mixing ratio 2 : 1100% by vol. 90- , includes11- Limited Edition, mixing clear 90-M4 and additional mixing bases, ifrequired.

Reducer 50% by vol. 93-E3 Adjusting Base(stir IMMEDIATELY after having added adjusting base)

Spray viscosityDIN 4 at 20°C

approx. 18 – 24 s Potlife at 20°CMixture will keep for one week when stored inplastic containers or cans coated inside.

Gravity cupSpraying pressure

HVLP gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar

Number of spraycoats Limited Edition:Magic Collection:

2 + ½2

Film thickness: 10-15 µm

Flash-off at 20°C Approx. 5 min. after each spraycoat.

Intermediate dryingDrying at 20°CBlow dry with Dry Jet

Flash off until mat after each spraycoat.

Sanding Remove dust nibs by dry sanding; gently fade out applying mist coat afterwards.

Page 165: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information90- Mixed tinters

10/2019

90 Line Glasurit® Basecoat mixed tinters G / T

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Mixture of 90 Line mixed tinters without 90-M4 Waterborne Mixing Base (e. g. at colour TOY 8Y0). Pleaseobserve the mixing ratio on the label.Mixture will keep for six months when stored in plastic containers or cans coated inside.

Paint system RATIO Aqua

Spreading rate: 130 m²/l at 1 µm

Mixing ratio 70% by weight 90-M4*30% by weight 90 Line mixed tinters (stir after addition of product)

2 : 1 100% by vol. 90 Line (mixture of 90-M4 Waterborne Mixing Base / 90 Line mixed tinters)

Reducer 50% by vol. 93-E3 Adjusting Base (stir IMMEDIATELY after having added adjusting base)* When using 90-M4 Waterborne Mixing base slow, use also 93-E3 slow.

Spray viscosityDIN 4 at 20°C

approx. 18-24 s Potlife at 20°C:

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 (spray to cover) + ½ to match the effect Film thickness 10-15 µm

Flash-off at 20°C Approx. 5 min. after each spraycoat.

Intermediate dryingDrying at 20°CBlow dry with Dry Jet

Flash off until mat after each spraycoat.

Sanding Remove dust nibs by dry sanding; gently fade out applying mist coat afterwards.

Page 166: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information90- Factory- pack

10/2019

90 Line Glasurit® Basecoat factory pack G / T

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Mixture of 90 Line factory-packed colour with 90-M4 Waterborne Mixing Base (e. g. at colour TOY 8Y0).Please observe the mixing ratio on the label!Mixture will keep for six months when stored in plastic containers or cans coated inside.

Paint system RATIO Aqua

Spreading rate: 130 m²/l at 1 µm

Mixing ratio 2 : 1 100% by vol. 90 Line (90 Line factory-packed colour with 90-M4)

Reducer 50% by vol. 93-E3 Adjusting Base(stir IMMEDIATELY after having added adjusting base)

Spray viscosityDIN 4 at 20°C

approx. 18-24 s Potlife at 20°C:

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 (spray to cover) + ½ to match the effect Film thickness 10-15 µm

Flash-off at 20°C Approx. 5 min. after each spraycoat.

Intermediate dryingDrying at 20°CBlow dry with Dry Jet

Flash off until mat after each spraycoat.

Sanding Remove dust nibs by dry sanding; gently fade out applying mist coat afterwards.

Page 167: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information90-905

03/2013

Blend-in Technique with Glasurit® 90-905 Alusilber

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Special tinting base to match certain colours like BMW A80, BMW A91 or VW LZ49Remarks: Substrates: Glasurit Filler / Surfacer or Primer Filler 285-, 801-72 or full cured, solvent resistant old paint

work.Observe the pretreatment in particular.If the rough surface of primer filler remains, it will result in a scaly appearance.If the sand-scratch marks of P500 remains, it will affect the surface quality by mottling or telegraphing thesand-scratches.Use sanding guide to control the sanding processUse soft inter face pad for orbital sander.

1. Pretreatment

P500 P1000 P1500Fade

out zone

700-11x

wipe dry

2. Application of 90-M50 Tricoat Additive (1)90-M50Glasurit®Blending Clear

2:193- E3

1 - 2fading outinto the

surroundingarea

Flash offuntil matt

HVLP1.3 mm2.0 bar

Page 168: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information90-905

03/2013

Blend-in Technique with Glasurit® 90-905 Alusilber

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

3. Application 90 Line “Alusilber” 90-905 shade90-905Glasurit®Alusilber

2:193- E3

Stirimmediately

afterhavingadded

adjustingbase

2 - 3 Flash offuntil mat

after eachspraycoat

HVLP 1.3 mm

1.0 -1.5 bar

4. Application of 90-M50 Blending Clear (2)90-M50Glasurit®Blending Clear

2:193- E3

1 - 2fading outinto the

surroundingarea

Flash offuntil matt

HVLP1.3 mm2.0 bar

Before the effect coat of 90 line,apply a wet coat of 90-M50 on theblending area to avoid overspray mist.

5. Application of 90 Line “Alusilber” 90-905 shade (2)90-905Glasurit®Alusilber

2:193- E3

Stirimmediately

afterhavingadded

adjustingbase

2 effectcoats

fading outinto the

surroundingarea

Flash offuntil mat

after eachspraycoat

HVLP1.3 mm

0.8-1.5 bar

Page 169: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information90-905

03/2013

Blend-in Technique with Glasurit® 90-905 Alusilber

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

6. Application of 923- clear according to technical information923-Glasurit® Clear

Page 170: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information90-905

03/2013

Edge-to-edge repair with Glasurit® 90-905 Alusilber

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Special tinting base to match certain colours BMW A80, BMW A91 or VW LZ49Remarks: Substrates: Glasurit Filler / Surfacer or Primer Filler 285-, 801-72 or fully cured, solvent resistant old paint

work.Observe the pretreatment in particular.If the rough surface of primer filler remains, it will result in a scaly appearance.If the sand-scratch marks of P500 remains, it will affect the surface quality by mottling or telegraphing thesand-scratches.Use sanding guide to control the sanding process.Use soft interface pad for orbital sander.

1. Pretreatment

P500 P1000 700-11x

wipe dry

2. Application of Tricoat Additive90-M50Glasurit®Blending Clear

2:193- E3

1 - 2 15 minat 20 °C

HVLP1.3 mm2.0 bar

For ground coat, apply wet coat to avoid generatingpeel on the surface.Allow the total dry time to expire in orderto avoid creating a scaly surface.

Page 171: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information90-905

03/2013

Edge-to-edge repair with Glasurit® 90-905 Alusilber

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

3. Application of 90 Line containing "Alusilber" 90-90590-905Glasurit®Alusilber

2:193- E3

Stirimmediately

afterhavingadded

adjustingbase

2 - 3 +2 effectcoats

Flash offuntil mat

after eachspraycoat

HVLP1.3 mm2.0 bar

4. Application of 923- clear according to the technical information923-Glasurit® Clear

Page 172: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information93-IC 330

01/2015

Glasurit® 90 LineAdditive for basecoat G / T

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: • For special applications recommended by car manufactures, the usage of 93-IC 330 could benecessary in 90 Line basecoats.

• Additive for solid-colour 90 Line and for use in solid-colour basecoats applied as a ground coat in 90Line 3-layer systems to improve tape resistance and hardness.

Remarks: • Substrates: Solvent-resistant old paintwork, sanding filler, Glasurit 285- primer fillers• Pre-treatment: Clean surfaces with 700-1 / sand with P400 - P500 / clean again with 700-1.

Alternative: apply to Glasurit wet-on-wet filler

100 % by vol.5 % by vol.50 - 70 % by vol.

90 Line basecoat*93-IC 33093-E3

Mixing ratio Mix the 90 Line basecoat to the formula and stir it carefully.Add 93-IC 330 and stir again carefully. Add 93-E3 and stir carefully. * 93-IC 330 is unsuitable for use in mixing formulas which contain the waterborne dispersions 11-E20A, 11-E30A or 11-E30B or mixing base concentrates 80-M.

Spray viscosityDIN 4 at 20°C

approx. 19 - 24 s Potlife at 20°C: 2 h

Gravity cupSpraying pressure

HVLP gun: 1.3 mm2.0 – 3.0 bar /0.7 bar at the nozzle

Compliant gravity-feed gun:1.3 – 1.4 mm, 2.0 bar

Number of spraycoats 2 - 3For some colours, one further spraycoat may benecessary.

Film thickness: 10 – 25 µm

Flash-off at 20°C Flash off until mat after each spraycoat.

Drying at 20 °CDrying at 60 °C

approx. 15 min.approx. 10 min. + cooling down

Infrared 1st spraycoat:2nd spraycoat:

flash off at room temperature until mat.at 40 – 50°C (max 70°C) surface temperature to mat surface + cooling.

Page 173: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information90-IC 440

03/2017

Glasurit® 90 Interior Color SystemMetallics/Solids/Pearl Effects G / T

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application:Remarks: • Mixing formulas with 90-IC 440 mixing clear and mixing bases are available to cover the whole range

of colours needed in automotive refinishing.• Substrates/Pre-treatment:

Solvent-resistant old paintwork, e-coated substrates,Glasurit 285- or 801- primer fillers/surfacersClean surfaces with 700-1 / sand with P400 - P500 / clean again with 700-1.For e-coated substrates that are difficult to reach, cleaning with 700-1 is sufficient.

• Prime bare metal areas with Glasurit 183-70.• Mixing formulas that contain 90-M5, 93-E3, 11-E waterborne mixing bases or mixing base

concentrates 80-M cannot be used with 90-IC 440.

Paint system

Spreading rate: 130 m²/l at 1 μm

2 : 1 + 5 %

Mixing ratio 100% by vol. 90- Metallics/Solids(Replace 90-M4 by 90-IC 440 in the mixing formula.)

Reducer 50% by vol. 352-91, -50, -216, 352-10, -30, -405% by vol. 93-IC 330

Spray viscosityDIN 4 at 20°C

approx. 15 – 18 s Potlife at 20°C: 4 h

Gravity cupSpraying pressure

HVLP gun: 1.3 mm2.0 – 3.0 bar /0.7 bar at the nozzle

Compliant gravity-feed gun:1.3 – 1.4 mm, 2.0 bar

Number of spraycoats 2 Film thickness: 10 – 15 μm

Flash-off at 20°C Approx. 5 min. after each spraycoat.

Drying at 20°C Drying at 60°C

15 min.3 h20 min.

dust-free and ready for maskingready for assemblyready for assembly

Page 174: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-35

10/2011

Glasurit® HS Clear VOC G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: HS clear for 90 Line basecoat / clear coat systems.Properties: High solids content, excellent weathering resistance; outstanding finish, resistance to yellowing, hardness;

fast drying, polishing and tape resistance.Remarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.

Paint system S 10

Spreading rate: 320 m²/l at 1 µm

Mixing ratio 2 : 1 + 10% 100% by vol. 923-35

Hardener 50% by vol. 929-33/-31/-34

Reducer 10% by vol. 352-91/-216

Spray viscosityDIN 4 at 20°C

20 -22 s Potlife at 20°C: 1 hour

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 Film thickness: 40 - 60 µm

Flash-off at 20°C 3 minutes between spraycoats

Drying at 20 °CDrying at 60 °C

10 hours30 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

Page 175: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-45

10/2011

Glasurit® HS Clear scratch resistant VOC G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Extremely scratch-resistant HS clear 90 Line basecoat / clearcoat systems.Properties: High solids content; extremely scratch-resistant; outstanding weathering and yellowing resistance; excellent

finish quality; quickly ready for polishing and masking.Remarks: • Suitable for repairing extremely scratch-resistant original finishes.

• Select hardener and reducer according to ambient temperature and size of object to be painted.

Paint system S 10

Spreading rate: 335 m²/l at 1 µm

Mixing ratio 2 : 1 + 10% 100% by vol. 923-45

Hardener 50% by vol. 929-33/-31/-34

Reducer 10% by vol. 352-91/-216

Spray viscosityDIN 4 at 20°C

20 -22 s Potlife at 20°C: 1 hour

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 Film thickness: 40 - 60 µm

Flash-off at 20°C 3 minutes between spraycoats

Drying at 20 °CDrying at 60 °C

10 h35 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

Page 176: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-55

08/2018

Glasurit® MS Extra Matt Clear G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)700: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 700 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Two-pack clear for mat basecoat/clearcoat finishes.In order to achieve different gloss levels, you can mix the product with Glasurit 923-58 MS Clear matelastified. For further information, please refer to S12a "Mat Clear System / modified".

Properties: Extra mat, plasticisedRemarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.

• Suitable for the repair of extremely mat OEM finishes.• Suitable for finishing bumpers, etc.• Can be used without Softface Additive!• 923-55 must not be used in mixing shelves.

Page 177: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-55

08/2018

Glasurit® MS Extra Matt Clear G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)700: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 700 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Paint system

Spreading rate: 240 m²/l at 1 µm

Mixing ratio 2 : 1100% by vol. 923-55

2 : 1+ 10% 100% by vol. 923-55

with VOC hardeners (weight):100 g. 923-55

Hardener 50% by vol. 929-97 50% by vol. 929-93,-91, -94

33 g. 929-31/-33/-34

Reducer 10% by vol. 352-91 17g. 352-91

Spray viscosityDIN 4 at 20°C

approx. 16 - 18 s Potlife at 20°C 4 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 Film thickness: 40 - 50 µm

Flash-off at 20°C Flash off until mat after each spraycoat and before baking.After the first spraycoat, allow to flash off for 10 - 15 min, after the second spraycoat for 15 - 20min.Do not flash off for more than 25 min after each spraycoat.

Drying at 20 °CDrying at 60 °C

7 h30 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

Page 178: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-57

08/2018

Glasurit® MS Clear matt Flexible G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)700: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 700 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Two-pack clear for mat basecoat/clearcoat systems on plastics.In order to achieve different gloss levels, you can mix the product with Glasurit 923-55 MS Clear matelastified. For further information, please refer to S 12 "Mat Clear System".

Properties: Silky matt, elastified (gloss: 53 ± 5 at an angle of 60 degrees)Remarks: • Use hardeners and reducers depending on ambient temperature and size of object to be painted.

• Suitable for the repair of silky mat OEM finishes.• Suitable for finishing bumpers, etc.• No need to add Softface Additive!• 923-57 must not be used in mixing shelves.

Paint system

Spreading rate: 300 m²/l at 1 µm

Mixing ratio 2 : 1+ 10% 100% by vol. 923-57

with VOC hardeners (weight):100 g. 923-57

Hardener 50% by vol. 929-93/-91/-94 33 g. 929-31/-33/-34

Reducer 10% by vol. 352-91 17g. 352-91

Spray viscosityDIN 4 at 20°C

approx. 18-20 s Potlife at 20°C: 4 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 Film thickness: 40 - 50 µm

Flash-off at 20°C Flash off until mat after each spraycoat and before baking.After the first spraycoat, allow to flash off for 10 - 15 min, after the second spraycoat for 15 - 20min.Do not flash off for more than 25 min after each spraycoat.

Drying at 20 °CDrying at 60 °C

8 hours30 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

Page 179: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-58

08/2018

Glasurit® MS Clear matt Flexible G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)700: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 700 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Two-pack clear for mat basecoat/clearcoat systems on plastics.In order to achieve different gloss levels, you can mix the product with Glasurit 923-55 MS Clear matelastified. For further information, please refer to S 12a Mat Clear System / modified.

Properties: Silky matt, elastifiedRemarks: • Suitable for the repair of silky mat OEM finishes.

• Suitable for finishing plastics (e. g. bumpers, etc.).• 923-58 must not be used in mixing shelves.

Paint system

Spreading rate: 300 m²/l at 1 µm

Mixing ratio 2 : 1100% by vol. 923-58

2 : 1+ 10% 100% by vol. 923-58

with VOC hardeners (weight):100 gr. 923-58

Hardener 50% by vol. 929-97 50% by vol.929-93/-91/-94

33 gr. 929-31/-33/-34

Reducer 10% by vol. 352-91 17g. 352-91

Spray viscosityDIN 4 at 20°C

approx. 18-20 s Potlife at 20°C: 4 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 Film thickness: 40 - 50 µm

Flash-off at 20°C Flash off until mat after each spraycoat and before baking.After the first spraycoat, allow to flash off for at least 10 - 15 min, after the second spraycoat for atleast 15 - 20 min.Do not flash off for more than 25 min after each spraycoat.

Drying at 20 °CDrying at 60 °C

8 hours30 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

Page 180: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-115

10/2011

Glasurit® HS Universal Clear VOC G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: HS clear for 90 Line basecoat / clear coat systems.Properties: High solids content, safe to spray, excellent flow and levelling, fast drying, excellent surface hardness,

polishing behaviour and tape resistance.Remarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.

Paint system S 10

Spreading rate: 330 m²/l at 1 µm

Mixing ratio 2 : 1 + 10% 100% by vol. 923-115

Hardener 50% by vol. 929-33/-31/-34

Reducer 10% by vol. 352-91/-216

Spray viscosityDIN 4 at 20°C

20 - 22 s Potlife at 20°C: 2 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

2 Film thickness: 40 - 60 µm

Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)

Film thickness: approx. 50 microns

Flash-off at 20°C 3 minutes between spraycoats

Drying at 20 °CDrying at 60 °C

10 hours30 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

Page 181: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-135

10/2011

Glasurit® HS Racing Clear VOC G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: HS clear for 90 Line basecoat/clearcoat systems.For use in quick repair jobs, especially on single panels or for Spot Repair.

Properties: Fast drying, excellent polishing behaviour.Remarks: • Select hardener, reducer and reducer percentage according to ambient temperature and size of

object to be painted.

Paint system

Spreading rate: 330 m²/l at 1 µm

Mixing ratio 2 : 1 + 10% 100% by vol. 923-135

Hardener 50% by vol. 929-31/-33

Reducer 10% by vol. 352-50/-91-/216 (depending on application conditions)

Spray viscosityDIN 4 at 20°C

18-20 s Potlife at 20°C 45 min. (929-31)

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

2 Film thickness: 40 - 60 µm

Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)

Film thickness: 40 - 60 µm

Flash-off at 20°C 1-2 min. after first spraycoat

Drying at 60 °C Polishing929-31 = 20 min.929-33 = 25 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

Page 182: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-335

10/2011

Glasurit® HS Multi Clear VOC G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: HS clear for 90 Line basecoat / clear coat systems.Properties: High solids content, safe to spray, excellent flow and good levelling, outstanding appearance for high-quality

automotive finishes. The product stands out for fast drying, excellent surface hardness, polishing behaviourand tape resistance.

Remarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.

Paint system S 10

Spreading rate: 330 m²/l at 1 µm

Mixing ratio 2 : 1 + 10% 100% by vol. 923-335

Hardener 50% by vol. 929-33/-31/-34

Reducer 10% by vol. 352-91/-216

Spray viscosityDIN 4 at 20°C

20 - 22 s Potlife at 20°C: 2 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

2 Film thickness: 40 - 60 µm

Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)

Film thickness: approx. 50 µm

Flash-off at 20°C 3 minutes between spraycoats

Drying at 20 °CDrying at 60 °C

10 hours30 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

Page 183: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-447

10/2011

Glasurit® HS Clear scratch-resistant VOC G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Extremely scratch-resistant HS clear for 90 Line basecoat / clearcoat systems.Properties: High solids content; extremely scratch-resistant; outstanding weathering and yellowing resistance, excellent

finish quality, quickly ready for polishing and masking.Remarks: • Suitable for repairing extremely scratch-resistant original finishes.

• Select hardener and reducer according to ambient temperature and size of object to be painted.

Paint system

Spreading rate: 335 m²/l at 1 µm

Mixing ratio 2 : 1 + 10%100% by vol.

923-447

Hardener 50% by vol. 929-33/-31/-34

Reducer 10% by vol. 352-91/-216

Spray viscosityDIN 4 at 20°C

20 – 22 s Potlife at 20°C: 1 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 – 1.4 mm 2.0 bar

Number of spraycoats 2 Film thickness: 40 – 60 µm

Flash-off at 20°C 3 – 5 minutes between spraycoats

Drying at 20 °CDrying at 60 °C

10 h30 Min.

Infrared (short wave)Infrared (medium wave)

8 Min. 10 – 15 Min.

Page 184: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-610

09/2019

Glasurit® HS Clear fast-drying VOC G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: HS Clear for 90 Line basecoats.For universal application in quick repair jobs on single panels up to a complete car side.

Properties: Fast drying, excellent polishing behavior and universal application.Remarks: • Select hardener, reducer and reducer percentage according to ambient temperature and size of

object to be painted.• Use reducer 352-70 only in combination with 929-63, -64 and with very high ambient temperatures

and infrared drying systems.

Paint system

Mixing ratio 3 : 1 : 1100 % by vol.

923-610

Hardener 33 % by vol. 929-61, -62, -63, -64

Reducer 33 % by vol. 352-10, -30, -40

Spray viscosityDIN 4 at 20°C

18 - 21 s Potlife at 20 °C: 45 min.

Gravity cupSpraying pressure

Compliant gravity-feed spray gun:1.3 – 1.4 mm 2.0 bar

HVLP-gravity-feed spray gun: 1.3 mm2.0 – 3.0 bar0.7 bar at the nozzle

Number of spraycoats 1 ½ without intermediate flash off2

Film thickness

40 - 60 µm

Flash-off at 20°C app. 3 min. intermediate flash off between the application of two spraycoats

Drying at 60 °CDrying at 40 °CDrying at 20 °C

10 - 15 min. at panel temperature *30 - 45 min. at panel temperature *2 - 3 h with 523-65 Glasurit Air-Drying Additive * Drying times can be influenced by the selection of hardener, reducer and application. 523-15Glasurit Racing Additive can reduce drying times.

Infrared (short wave) 10 min.

Page 185: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-625

09/2019

Glasurit® HS Clear universal VOC G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: HS clearcoat for 90 Line basecoats.For universal application in quick repair jobs on single panels up to the complete car.

Properties: Clearcoat is safe to apply and easy to process and is therefore suitable for an especially large applicationspectrum.

Remarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.• Use reducer 352-70 only in combination with 929-63, -64 and with very high ambient temperatures

and infrared drying systems.

Paint system

Mixing ratio 3 : 1 : 1100 % by vol. 923-625

Hardener 33 % by vol. 929-61, -62, -63, -64

Reducer 33 % by vol. 352-10, -30, -40

Spray viscosityDIN 4 at 20°C

18 - 21 s Potlife at 20°C 2 h

Gravity cupSpraying pressure

Compliant gravity-feed spray gun1.3 – 1,4 mm 2.0 bar

HVLP gravity-feed spray gun: 1.3 mm2.0 – 3.0 bar /0.7 bar at the nozzle

Number of spraycoats 1 ½ without intermediate flash off2

Film thickness

40 - 60 µm

Flash-off at 20°C app. 3 min. intermediate flash off between the application of two spraycoats

Drying at 60 °CDrying at 40 °CDrying at 20 °C

25 min. at panel temperature *45 - 60 min. at panel temperature *7 h ** Drying times can be influenced by the selection of hardener, reducer and application. 523-15Glasurit Racing Additive can reduce drying times.

Infrared (short wave) 10 min.

Page 186: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-630

09/2019

Glasurit® HS Clear superior gloss VOC G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: HS clearcoat for 90 Line basecoats.For high-quality repair jobs on single panels up to the complete car.

Properties: Clearcoat with excellent flow and high purity for high-quality automotive finishes.Remarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.

• Use reducer 352-70 only in combination with 929-63, -64 and with very high ambient temperaturesand infrared drying systems.

Paint system

Mixing ratio 3 : 1 : 1100 % by vol. 923-630

Hardener 33 % by vol. 929-61, -62, -63, -64

Reducer 33 % by vol. 352-10, -30, -40

Spray viscosityDIN 4 at 20°C

18 - 21 s Potlife at 20°C 2 h

Gravity cupSpraying pressure

Compliant gravity-feed spray gun:1.3 - 1.4 mm 2.0 bar

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar 0.7 bar at the nozzle

Number of spraycoats 2 1 ½ without intermediate flash off

Film thickness 40 - 60 µm

Flash-off at 20°C app. 3 min. intermediate flash off between the application of two spraycoats

Drying at 20 °CDrying at 60 °C

8 h *30 min. at panel temperature ** Drying times can be influenced by the selection of hardener, reducer and application. 523-15Glasurit Racing Additive can reduce drying times.

Infrared (short wave) 10 min.

Page 187: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-631

03/2020

Glasurit® HS clear coat superior gloss G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: HS clearcoat for 90 Line basecoats.For high-quality repair jobs on single panels up to the complete car.

Properties: Clearcoat with perfect flow, premium gloss and brilliance for high-quality automotive finishes.Remarks: • Alternatively use 929-61, 929-63, 929-64 hardener.

• Select hardener and reducer according to ambient temperature and size of object to be painted.• 523-15 Glasurit Racing Additive can reduce drying times.

Paint system

Mixing ratio 3 : 1 : 1100 % by vol. 923-631

Hardener 33 % by vol. 929-68, -61, -63, -64

Reducer 33 % by vol. 352-10, -30, -40

Spray viscosityDIN 4 at 20°C

18 - 22 s Potlife at 20°C 2 h

Gravity cupSpraying pressure

Compliant gravity-feed spray gun:1.3 - 1.4 mm 2.0 bar

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar 0.7 bar at the nozzle

Number of spraycoats 2 alternatively: 1 ½ without intermediate flash off

Film thickness 40 - 60 µm

Flash-off at 20°C app. 3 min. intermediate flash off between the application of two spraycoats

Drying at 60 °C 30 min. at panel temperature

Infrared (short wave) 10 min.

Page 188: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-645

08/2015

Glasurit® HS Clear scratch-resistant VOC G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: HS clearcoat for 90 Line basecoats for repairing scratch-resistant original finishes.Properties: Extremely scratch-resistant clearcoat with good polishability and outstanding finish quality.Remarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.

Paint system

Mixing ratio 3 : 1 : 1100 % by vol.

923-645

Hardener 33 % by vol. 929-61, -63, - 64

Reducer 33 % by vol. 352-10, -30, -40

Spray viscosityDIN 4 at 20°C

18 – 21 s Potlife at 20°C 1 h

Gravity cupSpraying pressure

Compliant gravity-feed spray gun:1.3 – 1.4 mm 2.0 bar

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar 0.7 bar at the nozzle

Number of spraycoats 2 1 ½ without intermediate flash off

Film thickness 40 – 60 µm

Flash-off at 20°C app. 3 min. intermediate flash off between the application of two spraycoats.

Drying at 20 °CDrying at 60 °C

10 h *30 min. at panel temperature ** Drying times can be influenced by the selection of hardener, reducer and application.

Infrared (short wave)Infrared (medium wave)

8 min. 10 – 15 min.

Page 189: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information923-666

01/2015

Glasurit® Clear VOC G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Polyurethane clear for basecoat/clearcoat systemsProperties: Clear with a high solids content; suitable for use in all vehicle refinishing processes.Remarks: Use Glasurit 929-666 Hardener VOC.

Paint system

Spreading rate: 311 m²/l at 1 µm

Mixing ratio 2 : 1 200% by vol. 923-666

Hardener 100% by vol. 929-666

Reducer

Spray viscosityDIN 4 at 20°C

20 - 22 s Potlife at 20°C: 2 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

2 Film thickness: 40-60 µm

Number of spraycoats ½ + 1 spraycoatcan be applied to vertical surfaces (no flash-offbetween coats required)

Film thickness: approx. 50 µm

Flash-off at 20°C 3 minutes between spraycoats

Drying at 20 °CDrying at 60 °C

10 hours30 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

Page 190: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information925-2002

10/2011

Glasurit® HS Clear ultra scratch-resistantVOC G / C

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)419: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Ultra scratch-resistant HS clear for 90 Line basecoat / clearcoat systems.Properties: High solids content; ultra scratch-resistant; long-term gloss retention, outstanding weathering resistance,

excellent finish quality, very quickly ready for polishing.Remarks: • Suitable for repairing ultra scratch-resistant original finishes.

• Select reducer according to ambient temperature and size of object to be painted.

Paint system

Spreading rate: 335 m²/l at 1 μm

Mixing ratio 100 g 925-2002

Hardener 40 g 929-2002

Reducer 20 g 352-91/-216 /-370

Spray viscosityDIN 4 at 20°C

20 – 22 s Potlife at 20°C: 1 h

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 – 1.4 mm 2.0 bar

Number of spraycoats 2 Film thickness: 40 – 60 μm

Flash-off at 20°C 3 – 5 minutes between spraycoats

Drying at 60 °C 40 min.

Infrared (short wave)Infrared (medium wave)

10 min.10 – 15 min.

Page 191: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information90-M5

10/2011

Glasurit® Tri-coat Additive G / X

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Additive for 3step colours used in 90 Line mixing formulas to produce translucent effects.

Paint system

Mixing ratio 90 Line Metallics/Solids (acc. to mixing formula)100% by vol. 90- (mixingformula incl. 90- M5)

Reducer 50% by vol. 93-E3 or 93-E3 slow Adjusting Base(stir IMMEDIATELY after having added adjusting base)

Spray viscosityDIN 4 at 20°C

18 –24 s

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.3 mm 2.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 + ½ to match effect Film thickness: 10 - 15 µm

Flash-off at 20°C approx. 5 minutes after each spraycoat

Intermediate dryingDrying at 20°CBlow dry with Dry Jet

Flash off until mat after each spraycoat.

Page 192: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information90-M50

10/2011

Glasurit® Blending Clear G / X

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Glasurit® 90-M50 Blending Clear is used for blending in metallic and solid colour Glasurit® 90 Line water-borne basecoats.

Properties: It helps to achieve a smooth homogeneous overspray area in the fade-out zone, avoiding dark shadowsaround the repair area.

Remarks: • The spray gun can be used for 90-M50 Blending Clear and 90 Line Basecoat without having to becleaned in between.

Paint system S 9, S 9.1, S 9.2

Mixing ratio 2 : 1, use mixing stick100% by vol. 90-M50

Reducer 50% by vol. 93-E3 or 93-E3 slow Adjusting Base(stir IMMEDIATELY after having added adjusting base)

Spray viscosityDIN 4 at 20°C

18 – 22 s

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.3 mm 2.0 bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats Application without intermediate flash off time with two coats. In this case the second coat willoverlap the first coat to achieve a smother edge.

Flash-off at 20°C none

Page 193: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information581-90

08/2019

Glasurit® Guide Coat black G / X

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)650: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 650 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Glasurit® 581-90 Guide Coat, black can be used on filler surfacer and primer filler coats and also onpolyester body fillers as a visual means to check sanding results.

Properties: Guide coat supplied in an aerosol can

Paint system

Spreading rate:

Shaking 2 min.

Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.

Number of spraycoats 1-2 mist coats

Page 194: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information700-1

10/2011

Glasurit® Cleaner G / X

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(a II)(200)198: The EU limit value for this product ( product category: IIB.a II ) in ready to use form is max 200 g/litre of VOC. The VOCcontent of this product is 198 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: 1. Glasurit 700-1 Cleanerto clean surfaces and blend-in areas prior to the application of Glasurit 176-72 1C Primer Filler and Glasurit90 Line metallic or solid colour basecoat.The cleaner acts as an anti-static agent and reduces dust settling during topcoat application on plastic parts.Can be used to clean sprayguns.Rinse clean spraying equipment with 700-1 Cleaner.

ApplicationSoak a lint-free cloth with 700-1 and wipe the surfaces to be refinished or spray 700-1 onto the surfacesto be refinished and wipe them with a lint-free cloth.

Properties: • Good cleaning properties• Anti-static effect (for plastics refinishing)

Remarks: Glasurit 700-1 Cleaner• to clean substrates before applying Glasurit 176-72- 1C Primer Filler or Glasurit 90 Line metallic or

solid colour basecoat;• to clean substrates after fine sanding of surfaces primed with Glasurit 176-72- 1C Primer Filler;• is used as an anti-static agent prior to topcoat application (especially on plastic parts);• to clean sprayguns before they are used to apply Glasurit 176-72- 1C Primer Filler or Glasurit 90

Line metallic or solid colour basecoat.

Paint system RATIO Aqua

Page 195: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information700-10

10/2011

Glasurit® Degreasing and cleansing agent G / X

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(a II)(200)186: The EU limit value for this product ( product category: IIB.a II ) in ready to use form is max 200 g/litre of VOC. The VOCcontent of this product is 186 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: 1. Glasurit 700-10 Degreasing and cleansing agent to clean surfaces to be refinished. Removes silicone, grease and wax residues from surfaces as well asmould release agents from plastic surfaces.When cleaning plastic surfaces, the cleaner produces an anti-static effect and thus reduces dust settling.

ApplicationSoak a lint-free cloth with 700-10 and wipe the surfaces to be refinished or spray 700-10 onto the surfacesto be refinished and wipe them with a lint-free cloth.

Properties: • Good cleaning properties• Anti-static effect (for plastics refinishing)

Remarks: Glasurit 700-10 Degreasing and cleansing agent• to clean surfaces to be refinished of silicone, grease and oil residues; heavily soiled vehicles should

be washed before being refinished;• to clean plastic surfaces of mould release agents that might impair adhesion.

Paint system RATIO Aqua

Page 196: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information700-7

10/2011

Glasurit® Coagulating powder G / X

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: When using water-borne products such as:• Glasurit® 90 Line Basecoat, Metallics/Solids• Glasurit® 176-72 1K Primer Filler• Glasurit® 1109- Stone Chip and Underbody Protection• Glasurit® 1109- Texture Finishthe water used to clean working tools should be collected in suitable containers.These containers must not get in touch with solvents.

Use of 700-7 Coagulating Powder: Add 2 or 3 scoops of 700-7 Coagulating Powder (approx. 75 g) perabout 10 litres waste water (scatter the powder to distribute the particles evenly and to increase efficiency)and stir briefly.

After a short interval, the solids will start to coagulate and can then be separated from the liquid by filtering,for example through filter mats or appropriate sieves (with a mesh size of about 80-100 microns).

When the contaminant concentration in the waste water is very high (i.e., when the water has not becomeclear after about 15 minutes), add more 700-7 Coagulating Powder. There is no risk of overdosing with700-7.

The coagulated substance must be disposed of in the same way as solvent-borne paint waste. The clear,aqueous phase may be discharged into the public sewage system subject to local waste-water regulations.When you are not sure, consult the competent local authorities.

Properties: • Glasurit® 700-7 Coagulating Powder is used to precipitate solids from the water used to cleanworking tools with which water-based products were processed.

• Once the coagulated substance has been separated, the clear, aqueous phase can be used againfor pre-cleaning sprayguns, which are finally rinsed with fresh tap water.

Paint system RATIO Aqua

Page 197: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information1109-

10/2011

Glasurit® Stone chip and underbodyprotection G / X

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)46: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 46 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Underbody and stone chip protection product or sealerProperties: • 1109-1240/6 ready for use, available in 1-litre cans, apply with Compliant gravity-feed spray gun

• 1109-1240/4 and 1109-1503/3 paste-like apply with special gun or airless pumps• 1109- can be recoated

Remarks: • Seal body-filled areas with Glasurit® 283- primer fillers.• Clean working tools with water immediately after use.• Remove overspray within 30 min. using a wet sponge or 352-91 Reducer.• 1109- can also be used as a sealer on bleeding old paintwork, peroxide patches and TPA substrates.• Underbody protection

airless: nozzle 0.41-0.5 mm, pressure 120-180 bar (1800 – 2700 p.s.i.)pressure pot: 2-3 mm nozzle, atomisation pressure: 3-6 bar (45-90 p.s.i.);material pressure depends on desired texture

Application Underbody protection Stone chip protection

Paint system

Spreading rate 450 m²/l at 1 micron 466 m²/l at 1 micron

Reducer water, if required max. 5% water, if required

Spray viscosityDIN 4 at 20°C

ready for use 20 s

Gravity cupSpraying pressure

HVLP gun: 1.9 mm 2.0-3.0 bar (30-45 p.s.i.) /0.7 bar (10 p.s.i.) at the nozzle

Number of spraycoats 4 - 6 1 - 2

Film thickness 500-1.000 microns 40-50 microns

Drying at 20 °CDrying at 60 °C

6 hours45 – 60 min.

2 hours30 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

8 min.10 - 15 min.

Page 198: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information352-450

10/2011

Glasurit® Blend-in Reducer G / X

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: • Blend-in reducer for 923- clears and 22 Line VOC topcoats.• Blend-in reducer to melt in overspray / overlap areas or to melt in clear coat/topcoat fade-out areas

in blend-in repairs.

Paint system S 7a, S 9

Spray viscosityDIN 4 at 20°C

ready for use

Gravity cupSpraying pressure

HVLP gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar

Number of spraycoats 2 or 3 (clear coat / topcoat fade-out areas)

Drying As recommended for the Glasurit clear used.

Page 199: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information352-500

10/2011

Glasurit® Spot-Blender G / X

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: A specific combination of solvents used to melt in clear coat fade-out areas in spot repairs or when fadingout the clear in blend-in repairs.

Remarks: The product can be supplied in a standard product container for spraygun application and also in an aerosolcan.

Paint system Glasurit Spot-Repair

Spray viscosityDIN 4 at 20°C

ready for use

Gravity cupSpraying pressure

HVLP minijet gun: 0.8 - 1.0 mm Compliant gravity-feed gun1.3 mm, 2.0 bar

Number of spraycoats 2 or 3 spraycoats to the clear coat fade-out areas to melt them in.

Drying As recommended for the Glasurit clear used.

Page 200: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information352-500 AE

08/2019

Glasurit® Spot-Blender - aerosol can G / X

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: A specific combination of solvents used to melt in clear coat fade-out areas in spot repairs or when fadingout the clear in blend-in repairs.

Paint system S 9, Glasurit Spot-Repair

Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.

Spray viscosityDIN 4 at 20°C

ready for use

Number of spraycoats 2 or 3 spraycoats to the clear coat fade-out areas to melt them in.

Drying As recommended for the Glasurit clear used.

Page 201: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information360-100

08/2015

Glasurit® PRO Active Wipes G / X

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c III)(780)8: The EU limit value for this product ( product category: IIB.c III ) in ready to use form is max 780 g/litre of VOC. The VOC contentof this product is 8 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Glasurit® PRO Active Wipes are intended for use on cleaned bare metal surfaces such as steel, galvanizedsteel and aluminum.

Properties: Thanks to their chemical reaction in contact with metal surfaces, Glasurit® PRO Active Wipes increase thecorrosion resistance and adhesion of the paint system to be applied.

Remarks: • Recoatable with all Glasurit® undercoat materials, except polyester body filler and waterborneproducts (176-72).

• Do not overcoat directly with basecoat or topcoat.• If you want to reuse used wipes during the same working day, store them in a container or in a

resealable plastic bag. This will protect the wipes from drying out. Do not return used wipes to theoriginal packaging.

Paint system Observe process-related regulations. Use on cleaned bare metal surfaces only.

Spreading rate: per cloth max. 3m2

Carefully seal container Close the container immediately after removing a PRO Active Wipe to protect the other wipesfrom drying out.

Cleaning 700-10, 700-1 (see relevant refinishing system)

Application Evenly wet the entire bare metal surface with 360-100.(Wipe with overlapping single cross coats).The surface must stay moist for at least 1 minute. This is imperative for the chemical reaction tocomplete and form a passivation layer.

Flash-off at 20°C Matt surfaceMax. 8 h

Can be overcoated with all Glasurit® undercoat materials, see technical data sheet or refinishingsystem

Page 202: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information522-10

01/2015

Glasurit® plastic additive G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Additive which makes Glasurit Non-Sanding-Filler suitable for direct application to all paintable plasticsubstrates normally used in the automotive industry.

Properties: good miscibilityRemarks: • No addition for painting of GRP necessary

• The product can also be applied to adjacent e-coated new parts, if necessary.• The addition of 522-10 does not produce adhesion to unpaintable pure polypropylene (PP) and

polyethylene (PE)

Paint system S 3

Mixing ratio 3 : 1 : 1100% by vol.

285-31, -38, -49, -95, -0

Hardener 33% by vol. 929-56, -55

Reducer 33% by vol. 522-10

Spray viscosityDIN 4 at 20°C

14 – 20 s Potlife at 20°C 1 – 2 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun:1,3 mm 2,0 – 3,0 bar / 0,7 bar at the nozzle

Compliant gravity-feed spray gun:1,3 – 1,4 mm 2,0 bar

Number of spraycoats ½ + 1 (body filled area / entire surface)Film thickness: 20 – 35 μm

2Film thickness: 40 – 60 µm

Flash-off at 20°C 15 – 20 min. -

Drying at 60 °C - 25 Min.

Sanding: manual - P500 - P800

Sanding: orbital sander - P400 - P500

Page 203: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information522-55

03/2018

Glasurit® Air-Drying Primer Filler Additive G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Anwendung: Additive for accelerated air drying of Glasurit® 2 component primer fillers on vertical and horizontal surfaces.Using 522-55 will allow for a dust-free surface more quickly. Sandability and readiness for assembly willbe significantly improved. 522-55 is particularly suited for bodyshops who want to save energy and dry theprimer filler at room temperature. 522-55 can help to reduce the occupation times of the combi-booth anddrying oven. 522-55 is particularly suited for small repairs.

Eigenschaften: Shorter drying time at room temperature.Improved surface drying and curing.

Anmerkungen: Use 522-55 Glasurit Air-Drying Primer Filler Additive only at room temperature >20°C.Ambient temperature and film build can greatly affect the drying behaviour.522-55 is intended for use only in 285-505, -555 and -655.522-55 will reduce the potlife.

Paint system Primer Filler

Mixing ratio 4 : 1 : 1100 Vol. %

285-505285-555285-655

Hardener 25 Vol. % 929-55

Reducer 25 Vol. % 522-55

Spray viscosityDIN 4 at 20°C

Potlife 20°C: 35 min.

Gravity cupSpraying pressure

Refer to the technical data sheet of the product in which 522-55 is used.

Number of spraycoats 2 Film thickness: ca. 50 - 70 µm

Drying at 20 °C ca. 40 Min.

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 204: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information522-78

03/2019

Glasurit® Brush- and Roll Additive G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Additive to be used when 22 Line VOC, 22 VOC MC600 is applied by brush or rollProperties: For brush and roller application, mix 22 Line VOC, 22 VOC MC600 topcoats with 929-13 only.

Other hardeners will thin the product too much. 522-78 improves the flow properties of 22 Line VOC topcoatsand prevents aeration in the applied film.

Remarks: • Only partly suitable when large areas are to be refinished as ready-for-use material dries very faston the surface.

Paint system

Mixing ratio 100 % by vol. 22 Line VOC, 22 Line VOC MC600

Hardener 33 % by vol. 929-13

Reducer 5 % by vol. 522-78

Potlife at 20 °C 1 h

Number of coats 2 - 3

Film thickness 50 – 70 μm

Drying at 20 °CDrying at 60 °C

8 hours30 min.

Infrared (short wave)Infrared (medium wave)

8 min. 10 – 15 min.

Page 205: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information522-111

11/2017

Glasurit® Soft face Additive G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Plasticising additive used in plastics refinishing proceduresProperties: Elastified, good miscibilityRemarks: • Addition of 25% by vol.

Application Undercoat materials Topcoat/clear

Paint system S. 3, S. 3a

Mixing ratio 4 parts. 285- (100% byvol.)1 part. 522-111 (25%by vol.)

4 parts 22 VOC 923-(100% by vol.)1 part 522-111 (25% byvol.)

4 parts 22 VOC MC600 (100% by vol.)1 part 522-111 (25% by vol.)

Hardener 4 : 1 : 1 100% by vol. 285- :522-11125% by vol. 929-55,-56

2 : 1 + 10 % 100% by vol. 22VOC /923- : 522-11150% by vol. 929-31,-33

3 : 1 : 1100% by vol. 22 VOC MC600 / 923- : 522-11133% by vol. 929-61, -63, -64

Reducer 25% by vol. 352-91,-50

10% by vol. 352-91,-50

33% by vol. 352-10, -30, -40

Spray viscosityDIN 4 at 20°C

16 - 18 s 22 VOC,22 MC600923-

20 - 22 s 17 - 18 s

Potlife at 20 °C 1 - 2 hours 4 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.7 - 1.9 mm2.0 –3.0 bar0.7 bar at the nozzle

HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle

Number of spraycoats 2 2

Film thickness approx. 50 µm 50-60 µm

Drying at 20 °CDrying at 60 °C

4 hours40 min.

16 hours45 min

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

8 min.10 - 15 min.

Page 206: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information522-322

09/2018

Glasurit® HS Flexible Matting agent G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: HS matting agent for 22 Line VOC Topcoat, 22 VOC MC600 and 923- clearsProperties: Easy to mixRemarks: • Also for use on plastics, without addition of 522-111 Glasurit Softface Addtive

• Prepare only the quantity of paint that will be used the same day because the gloss level may changewhen the mixture is stored!

• 522-322 must not be used in mixing shelves.Stir immediately after adding Glasurit® 522-322 HS Matting Agent!

Application 22 Line VOC Topcoats, 22 VOC MC600 923-Clears

Paint system

Step 1:Mixing ratio

semi-gloss100% by weight 22 Line VOC25% by weight 522-322satin gloss100% by weight 22 Line VOC35% by weight 522-322silky matt100% by weight 22 Line VOC45% by weight 522-322

semi-gloss100% by weight 923-25% by weight 522-322satin gloss100% by weight 923-50% by weight 522-322silky matt100% by weight 923-70% by weight 522-322

Step 2:Mixing ratio

3 : 1 : 1100% by vol. 22 VOCMC600

2 : 1 + 10%100% by vol. 22 Line VOC, 923-

Hardener 33% by vol. 929-61,-63, -64

50% by vol. 929-31/-33

Reducer 33% by vol. 352-10,-30, -40

10% by vol. 352-50/-91/-216

Spray viscosityDIN 4 at 20°C

20 - 22 s Potlife at 20°C: 2 - 3 hours

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 Film thickness: approx. 50-70 µm

929-33, -63: 929-31, -61:

Drying at 20 °CDrying at 60 °C

8 hours30 min.

6 hours20 min

Infrared (short wave)Infrared (medium wave)

8 min.10 - 15 min.

Page 207: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information522-345

09/2018

Glasurit® Texture additive Fine G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Texturing, elastifying and matting agent to be used, for example, when FORD bumpers are to be refinished.For use on hard plastics the product can be mixed 1:1 with 22 Line VOC, 22 VOC MC600 Topcoat or 2:1with 923- clears.

Remarks: • Do not strain the material.• 522-345 must not be used in mixing shelves.

Paint system 22 Line VOC, 22 VOC MC600 Topcoats / 923- Clears

Weight in according to mixing formula orStep 1:Mixing ratio

100% by vol. 22 VOC, 22 VOC MC600100% by vol. 522-345

100% by vol. 923-50% by vol. 522-345

Step 2:Mixing ratio

3 : 1 : 1100% by vol. 22Line VOC MC600 /923- : 522-345

2:1 + 10%100% by vol. 22 Line VOC / 923- : 522-345

Hardener 33% by vol. 929-61,-63, -64

50% by vol. 929-31, -33

Reducer 33% by vol. 352-10,-30, -40

10% by vol. 352-50, -91

Spray viscosityDIN 4 at 20°C

16-18 seconds Potlife at 20°C:6 hours (with 929-33, -63)4 hours (with 929-31, -61)

Gravity cupSpraying pressure

HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle

Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar

Number of spraycoats 2 Film thickness 50 – 70 µm

929-33, -63: 929-31, -61:

Drying at 20 °CDrying at 60 °C

10 hours30 min.

6 hours20 min.

Infrared (short wave)Infrared (medium wave)

8 min.10 -15 min.

Page 208: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information523-15

11/2017

Glasurit® Racing Additive G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Drying accelerator for Glasurit standard clears (VOC-compliant and non-VOC-compliant), 22 Line, 22 LineVOC, 22 VOC MC600 and 285- HS-Primerfiller / Filler

Properties: • Reduction of drying times• Improves surface drying and curing performance as well as tape resistance

Properties: No add of 523-15 Racing Additive in 285- Primerfiller / Filler at temperatures > 25°C possible, due to tooshort potlife

Paint system Clear coat

2 : 1 + 10 % VOC-compliant clear

Mixing ratio 100% by vol. 923-35923-115923-135923-335

Hardener 50% by vol. 929-31, -33

Reducer 10% by vol. 523-15

Spray viscosityDIN 4 at 20°C

16 – 22 s, depending on product used Potlife at 20°C:45 - 120 min., depending on product used

Gravity cupSpraying pressure

HVLP gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar

Number of spraycoats ½ + 1 Film thickness:

40 - 60 µm

Drying at 20 °C 923-135923-35, -115, -335

1 h4 h

Drying at 60 °C 923-135923-35, -115, -335

15 min.20 min.

Infrared (short wave)Infrared (medium wave)

6 min.8 - 12 min.

Page 209: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information523-15

11/2017

Glasurit® Racing Additive G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Clear coat

3 : 1 : 1 VOC-compliant clear

Mixing ratio 100% by vol. 923-610923-625923-630

Hardener 33% by vol. 929-61, -63

Reducer 33% by vol. 523-15

Spray viscosityDIN 4 at 20°C

18 – 21 s, depending on product used Potlife at 20°C: 30 - 120 min.,depending on productused

Gravity cupSpraying pressure

Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar

HVLP gun: 1.3mm2,0 - 3.0 bar / 0.7 bar at the nozzle

Number of spraycoats ½ + 12

Film thickness:  40 - 60 µm

Flash-off at 20°C approx. 2 min between spray coats

923-610 923-625 923-630

Drying at 60 °CDrying at 40 °CDrying at 20 °C

10-15 min, improved polishability30 min3 - 4 h

15 - 20 min30 - 45 min4 h

20 min-4 h

Page 210: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information523-15

11/2017

Glasurit® Racing Additive G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Paint system 22 Line VOC

2 : 1 + 10 %

Mixing ratio 100% by vol. 22 Line VOC

Hardener 50% by vol. 929-31, -33

Reducer 10% by vol. 523-15

Spray viscosityDIN 4 at 20°C

app. 20 - 24 s Potlife at 20°C: 30 min.

Gravity cupSpraying pressure

HVLP gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar

2intermediate flash off app. 5 min.

Film thickness: 50 - 70 µm

Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)

Film thickness: app. 50 µm

Drying at 20 °C 4 h

Drying at 60 °C 20 min.

Infrared (short wave)Infrared (medium wave)

6 min.8 - 12 min.

Page 211: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information523-15

11/2017

Glasurit® Racing Additive G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Paint system 22 VOC MC600

3 : 1 : 1

Mixing ratio 100% by vol. 22 VOC MC600

Hardener 33% by vol. 929-61, -63

Reducer 33% by vol. 523-15

Spray viscosityDIN 4 at 20°C

app. 20 - 24 s Potlife at 20°C: 30 min.

Gravity cupSpraying pressure

HVLP gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar

2intermediate flash off app. 5 min.

Film thickness: 50 - 70 µm

Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)

Film thickness: app. 50 µm

Drying at 20 °C 4 h

Drying at 60 °C 20 min.

Infrared (short wave)Infrared (medium wave)

6 min.8 - 12 min.

Page 212: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information523-15

11/2017

Glasurit® Racing Additive G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Paint system HS-Primerfiller / Filler

4 : 1 : 1 HS-Primerfiller 3 : 1 : 1 Non-Sanding-Filler

Mixing ratio 100% by vol. 285-505285-555285-655

100% by vol. 285-31285-38285-49285-95285-0

Hardener 25% by vol. 929-55, -56 33% by vol. 929-56 / -55

Reducer 25% by vol. 523-15 33% by vol. 523-15

Spray viscosityDIN 4 at 20°C

14 – 22 s, depending on product used Potlife at 20°C:30 – 60 min., depending on product used

HVLP gun: 1.7 – 1.9 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

HVLP gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzleGravity cup

Spraying pressure Compliant gravity-feed gun1.6 – 1.8 mm, 2.0 bar

Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar

Number of spraycoats 2 Film thickness: 50 – 70 μm

½ + 1 Film thickness: 20 – 35 μm

Drying at 20 °C 1,5 h 10 min. (*)

Drying at 60 °C 10 min. -

Infrared (short wave) 4 min. -

Sanding: manual P400 - P600 (*) If the recommended drying time is exceededby more than 20 min, the panel has to be lightlyscuff-sanded.

Sanding: orbital sander P400 - P500 -

Page 213: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information523-15

11/2017

Glasurit® Racing Additive G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Paint system Primerfiller

4 : 1 : 1

Mixing ratio 100% by vol. 285-700285-730285-790

Hardener 25% by vol. 929-55, -56

Reducer 25% by vol. 523-15

Spray viscosityDIN 4 at 20°C

20 – 24 s, depending on product used Potlife at 20°C: 20 min

Gravity cupSpraying pressure

HVLP gun: 1.7 – 1.9 mm2.0 – 3.0 bar / 0.7 bar at the nozzle

Compliant gravity-feed gun1.6 – 1.8 mm, 2.0 bar

Number of spraycoats 2 Film thickness: 50 - 70 µm

Drying at 20 °C 1,5 h

Drying at 60 °C 15 min.

Infrared (short wave) 6 min.

Sanding: manual P800

Sanding: orbital sander P400 - P500

Page 214: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information523-65

12/2015

Glasurit® Air-Drying Additive G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Additive for accelerated air drying of Glasurit® 2 component standard VOC clearcoats on vertical andhorizontal surfaces.Using 523-65 will allow for a dust-free surface more quickly. Sandability, polishability and readiness forassembly will be significantly improved. 523-65 is particularly suited for bodyshops who want to save energyand dry the clearcoat at a panel temperature below 60°C. 523-65 can help to reduce the occupation timesof the combi-booth and drying oven. 523-65 is particularly suited for small repairs.

Properties: Shorter drying time at room temperatureImproved surface drying, curing and polishability

Remarks: Use Glasurit 523-65 Air-Drying Additive at room temperature > 20°C only.Ambient temperature and film build can greatly affect the drying behavior.523-65 is intended for use only in 923- 610, -625, -630.523-65 will reduce the potlife.

Page 215: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information523-65

12/2015

Glasurit® Air-Drying Additive G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Paint system Clearcoat

Mixing ratio 3 : 1 : 1100 Vol. %

923-610923-625923-630

Hardener 33 Vol. % 929-61

Reducer 33 Vol. % 523-65

Spray viscosityDIN 4 at 20°C

Depending on the product 18 - 21 s Potlife 20 °C: Depending on theproduct 30 - 60 min.

Gravity cupSpraying pressure

Refer to the technical data sheet of the productin which 523-65 is used.

Number of spraycoats 1 ½ without intermediate flash-off time Film thickness approx. 50 µm

Drying 923-610Dust-free afterPolishable after 923-625Dust-free afterPolishable after 923-630Dust-free afterPolishable after * Spraybooth incirculating air modes** Waiting time at roomtemperature aftersurface drying in theoven

20º C 20 - 30 min *2 - 3 h 25 - 35 min *3 - 4 h 35 - 45 min *4 h

40º C 10 - 15 min1 h ** 15 - 20 min1.5 h ** 20 - 25 min2 h **

60º C < 10 min1 h ** 10 - 15 min1.5 h ** 15 - 20 min2 h **

Page 216: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information580-100

11/2017

Glasurit® Anti-silicone additive G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Used to avoid craters caused by silicones (wetting defects)Remarks: • Never add 580-100 inside the spray booth. Immediately remove cloths soiled with Antisilicone

Additive• When you have used 580-100 Antisilicone Additive in the first coat, you must use it in all following

coats as well (at least the same volume).• Do not use 580-100 in Glasurit VOC clears and 22 Line HS 2K Topcoat, VOC, 22 VOC MC600!

Paint system

Mixing ratio Add 2% to max. 5% of 580-100 to the RFU topcoat.

Hardener

Reducer

Page 217: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information929-

10/2011

Glasurit® Hardener Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Hardeners for two-pack productsProperties: • 929-13 for brushing 22, 22 VOC Line Topcoat ( 522-78 Glasurit® Brush and Roll Additive )Remarks: • Seal cans with left-over material carefully!

• Hardeners are sensitive to humidity!• See Technical Information sheets for base products.

Page 218: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information929- HS

10/2011

Glasurit® HS Topcoat Hardener / HS FillerHardener G

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: Glasurit HS topcoat hardenersto be mixed with Glasurit 22 Line topcoats and Glasurit 923- clears

• 929-93 RATIO System• 929-91 quick panel repairs, low temperatures• 929-94 very large areas, high temperatures (> 30°C)

Glasurit HS filler hardenersto be mixed with Glasurit 285- undercoat materials

• 929-55 Glasurit HS Hardener, fast• 929-56 Glasurit HS Hardener, normal

Remarks: • Seal cans with left-over material carefully!• Hardeners are sensitive to humidity!• See Technical Information sheets for base products.

Page 219: Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für PKW-Lackierungen Manuale per la riverniciatura di autovetture Reparationshandbok

Technical Information929- VOC

03/2018

Glasurit® Hardener VOC G / Z

Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany

Application: • Hardeners for VOC-compliant (420 g/l) clears and topcoatsProperties: • 929-33 VOC Hardener normal

• 929-31 VOC Hardener fast• 929-34 VOC Hardener slow

Hardeners for VOC-compliant clears 923-610, -625,- 630, -645,22 Line HS 2K Topcoat VOC MC600

• 929-63 VOC Hardener normal• 929-61 VOC Hardener fast• 929-64 VOC Hardener slow

Remarks: • Seal cans with left-over material carefully!• Hardeners are sensitive to humidity!• See Technical Information sheets for base products.