Datenübertragung & Spannungsversorgung

22
Datenübertragung & Spannungsversorgung Data Transmission & Power Supply

Transcript of Datenübertragung & Spannungsversorgung

787

Datenübertragung & SpannungsversorgungData Transmission & Power Supply

788

Kabelsteckverbinder• Schraubverriegelung nach DIN EN 61076-2-111• Schutzart IP67 1)

• Am Kabel angespritzte Ausführungen• Konfektionierbar• Schraubklemmanschluss• Einfache Montage• Winkelsteckverbinder in 4 Positionen einstellbar

Flanschsteckverbinder• Schraubverriegelung nach DIN EN 61076-2-111• Schutzart IP67 1)

• Einfache Montage• Tauchlötanschluss/Litzen• Verschiedene Bauformen

Cable Connectors• Screw locking according to DIN EN 61076-2-111• Degree of protection IP67 1) • Moulded versions• Cable assembly possible• Screw clamp connection• Easy assembly• Angled connector adjustable in 4 positions

Panel Mount Connectors• Screw locking according to DIN EN 61076-2-111• Degree of protection IP67 1) • Easy assembly• Dip solder termination/single wires• Various variants

M12 Automatisierungstechnik T-/L-KodierungM12 Automation Technology T-/L-Coding

813

1) Erläuterung der Schutzarten siehe technische Informationen./ 1) Explanation of protection standards see technical information.

789

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

Kabelstecker mit T-Kodierung, zur Spannungsversorgung, PowerMale cable connector with T-coding, for power supply, Power

Winkelstecker mit T-Kodierung, PowerMale angled connector with T-coding, Power

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

PolzahlContacts

KabeldurchlassCable outlet

Bestell-Nr.Ordering-No.

4 8–10 mm 99 0629 19 04

PolzahlContacts

KabeldurchlassCable outlet

Bestell-Nr.Ordering-No.

4 8–10 mm 99 0629 58 04

Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm/screw clamp TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16) Wire gaugeKabeldurchlass 8–10 mm Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse PA Material of housing

M12 x

1

Ø 20

,2

~63

SW 18mm Ø 20

SW 19mm

Kabe

l Ø 8–

10Ca

ble Ø

8–10

~44

M12 x 1

Kabel Ø 8–10Cable Ø 8–10

45° Verdrehen des Kontakteinsatzes zum Winkelgang im 90° Raster möglich.It is possible to turn and fix the contact carrier in 4 different 90° positions.

Ø 20,2

SW 18mm

SW 19mm

790

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

Kabelstecker mit T-Kodierung, zur Spannungsversorgung, Power, Irisfeder, schirmbarMale cable connector with T-coding, for power supply, Power, screw clamp connection, iris type spring, shieldable

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

PolzahlContacts

KabeldurchlassCable outlet

Bestell-Nr.Ordering-No.

4

5–8 mm 99 1631 814 04

8–9 mm 99 1631 812 04

Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm/screw clamp TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16) Wire gaugeKabeldurchlass 5–8 mm, 8–9 mm Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse Zink Druckguss vernickelt/zinc diecasting nickel plated Material of housing

M12 x

1

~70

Ø 20

SW 18mm SW 16mm SW 13mm

791

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-L

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

Kabelstecker mit L-Kodierung, Schraubklemmanschluss, PowerMale cable connector with L-coding, screw clamp termination, Power

PolzahlContacts

KabeldurchlassCable outlet

Bestell-Nr.Ordering-No.

4+FE 8–13 mm 99 0639 29 05

M12 x

25

SW 22mm

76

Ø 25

SW 23mm

SW 23mm SW 20mm

Polzahl 4+FE Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm/screw clamp TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16) mit Aderendhülse/with ferrule, max. 2,5 mm2 (max. AWG 44) ohne Aderendhülse/without ferrule Wire gaugeKabeldurchlass 8–13 mm Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 630 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe ll Material groupBemessungsstrom (40°C) 12 A, 16 A Rated current (40 °C)Durchgangswiderstand ≤ 5 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse PA Material of housing

792

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

Kabeldose mit T-Kodierung, PowerFemale cable connector with T-coding, Power

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

PolzahlContacts

KabeldurchlassCable outlet

Bestell-Nr.Ordering-No.

4 8–10 mm 99 0630 19 04

M12 x

20,2

~58

Ø 20

Kabe

l Ø 8–

10Ca

ble Ø

8–10

SW 18mm SW 19mm

Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm/screw clamp TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16) Wire gaugeKabeldurchlass 8–10 mm Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse PA Material of housing

Winkeldose mit T-Kodierung, PowerFemale angled connector with T-coding, Power

PolzahlContacts

KabeldurchlassCable outlet

Bestell-Nr.Ordering-No.

4 8–10 mm 99 0630 58 04

~39

M12 x 1

Kabel Ø 8–10Cable Ø 8–10

45° Verdrehen des Kontakteinsatzes zum Winkelgang im 90° Raster möglich.It is possible to turn and fix the contact carrier in 4 different 90° positions.

Ø 20,2

SW 18mm

SW 19mm

1

2

34

793

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm/screw clamp TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16) Wire gaugeKabeldurchlass 5–8 mm, 8–9 mm Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse Zink Druckguss vernickelt/zinc diecasting nickel plated Material of housing

Kabeldose mit T-Kodierung, Power, Irisfeder, schirmbarFemale cable connector with T-coding, Power, screw clamp connection, iris type spring, shieldable

PolzahlContacts

KabeldurchlassCable outlet

Bestell-Nr.Ordering-No.

4

5–8 mm 99 1632 814 04

8–9 mm 99 1632 812 04

~65

M12 x

20

SW 18mm SW 16mm SW 13mm

794

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-L

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

Polzahl 4+FE Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm/screw clamp TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16) mit Aderendhülse/with ferrule, max. 2,5 mm2 (max. AWG 44) ohne Aderendhülse/without ferrule Wire gaugeKabeldurchlass 8–13 mm Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 630 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe ll Material groupBemessungsstrom (40°C) 12 A, 16 A Rated current (40 °C)Durchgangswiderstand ≤ 5 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse PA Material of housing

Kabeldose mit L-Kodierung, Schraubklemmanschluss, PowerFemale cable connector with L-coding, screw clamp termination, Power

PolzahlContacts

KabeldurchlassCable outlet

Bestell-Nr.Ordering-No.

4+FE 8–13 mm 99 0640 29 05

M12 x

25

Ø 25

SW 22mm

70

SW 23mm

SW 23mm SW 20mm

795

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

MontageanleitungAssembly instruction

Abisoliermaße Kabelsteckverbinder, Schraubklemmanschluss, nicht schirmbarStrip measures cable connectors, screw clamp connection, not shieldable

Abisoliermaße Winkelsteckverbinder, Schraubklemmanschluss, nicht schirmbarStrip measures angled connectors, screw clamp connection, not shieldable

20 abmanteln

dismantle

abisolieren

strip5

20abmanteln

dismantle

abisolieren

strip5

Abisoliermaße Kabelsteckverbinder, Irisfeder, schirmbarStrip measures cable connectors, iris type spring, shieldable

Schirmdurchmesser ≤5,5 mmshielding braid diameter ≤5,5 mm

Schirmdurchmesser >5,5 mmshielding braid diameter >5,5 mm

33

5

12

21 abmanteln

dismantle

abisolieren

strip5

Schirm kürzen

shorten shield

12 Schirm auf Kabelmantel umschlagen und mit Kupfer-Tape umwickelnwrap shielding braid with copper tape and revert to cable jacket

Festdrehen mit ≥ 100 cNmscrew down with a torque ≥ 100 cNm

abmanteln

dismantle

abisolieren

strip

Schirm kürzen

shorten shield

796

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T/-L

MontageanleitungAssembly instruction

Abisoliermaße Kabelsteckverbinder mit L-Kodierung, Schraubklemmanschluss, PowerStrip measures cable connectors with L-coding, screw clamp termination, Power

EinzelteildarstellungComponent part drawing

Kabelsteckverbinder mit L-Kodierung, Schraubklemmanschluss, PowerStrip measures cable connectors with L-coding, screw clamp termination, Power

KennlinieRating

Steckereinsatzmale insert

Buchseneinsatzfemale insert

Kupplungshülsesleeve

Druckschraubepressing screw

Dichtungseal

Dichtungseal

Strombelastbarkeitskurve nach DIN EN 60512 für POWER-Kabelsteckverbinder

Derating curve according to DIN EN 60512 for POWER cable connectors

Belastungsstrom I (A)Load current I (A)

Bauteil-Umgebungstemperatur TU (°C)Ambient temperature of part TU (°C)

191817161514131211109876543210

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95

obere Grenz-temperaturhigh limit temperature

T-Kodierung 4-poligT-coding 4 pole version

Alternativ-DichtringAlternative sealing ring

30 abmanteln

dismantle

abisolieren

strip8

Vormontierter DichtringPre-mounted sealing ring

1. Klemmschrauben herausdrehen, bis Bohrungen für Litzen völlig frei sind.2. Optional: Bei Kabeldurchmesser über 12 mm den vor- montierten Dichtring gegen beigelegten Alternativ-Dichtring tauschen.3. Kupplungshülse mit Kabelklemmung auf Kabel schieben.4. Kabel abmanteln.5. Adern abisolieren und Litzen verdrillen.6. Litzen anschrauben.7. Kupplungshülse aufschrauben.8. Druckschraube andrehen.

1. Clamp out screws until bores for single wires are completely free.2. Optional: Change the the pre-mounted sealing ring against the alternative sealing ring when cable diameter is bigger than 12 mm. 3. Push sleeve on cable with cable clamp.

4. Cut off cable coating,5. Strip single cores and twist single wires.6. Screw single wires.7. Screw on sleeve.8. Turn on pressing screw.

797

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

Kabelstecker mit T-Kodierung, zur Spannungsversorgung, umspritzt, PURMale cable connector with T-coding, for power supply, moulded, PUR

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

PolzahlContacts

KabelmantelCable jacket

KabellängeCable length

Bestell-Nr.Ordering-No.

4

PUR 2 m 77 0629 0000 50704-0200

PUR 5 m 77 0629 0000 50704-0500

Kabeldose mit T-Kodierung, zur Spannungsversorgung, umspritzt, PURFemale cable connector with T-coding, for power supply, moulded, PUR

PolzahlContacts

KabelmantelCable jacket

KabellängeCable length

Bestell-Nr.Ordering-No.

4

PUR 2 m 77 0630 0000 50704-0200

PUR 5 m 77 0630 0000 50704-0500

Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart crimpen, am Kabel angespritzt/crimp, moulded TerminationAnschlussquerschnitt 1,5 mm2 (AWG 16) Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 630 V Rated voltageBemessungs-Stoßspannung 6000 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt Stift/pin CuZn (Messing/brass), Buchse/socket CuSn (Bronze/bronze) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PUR Material of contact bodyMaterial Gehäuse PUR Material of housing

48,531

L

Ø 14

,5M1

2 x 1

SW 13mm

Ø 14

,5

4431

L

Ø 14

,5M1

2 x 1

SW 13mm

Ø 14

,5

798

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

1) Vergleichbare AWG Leiter siehe technische Informationen./ 1) Comparable AWG conductors see technical information.

Technische Daten Standard KabelSpecifications Standard cable

Polzahl 4 Number of contactsQuerschnitt mm2 1) 4 x 1,5 mm2 (AWG 16) Wire gauge mm2 1)

Material Mantel PUR schwarz/black Material jacketIsolation Litze TPM Insulation wireLitzenaufbau (mm) 82 x 0,15 Design of wire (mm)Kabelmantel (mm) 8 Cable jacket (mm)Leiterwiderstand 57 Ω/Km (20 °C) Resistance of wireTemperaturbereich (Kabel bewegt) PUR: – 20 °C /+ 80 °C Temperature range (cable in move)Temperaturbereich (Kabel fest) PUR: – 50 °C /+ 80 °C Temperature range (cable not in move)Biegeradius (Kabel bewegt) min. 10 x D Bending radius (cable in move)Biegeradius (Kabel fest) min. 7,5 x D Bending radius (cable not in move)Biegezyklen (bei 10 x D) 5 Mio. Bending cycles (at 10 x D)Zulässige Beschleunigung 5 m/s2 Permitted accelerationVerfahrweg horizontal 5 m/s2 5 m Traverse path horizontal 5 m/s2

Verfahrweg vertikal 5 m/s2 2 m Traverse path vertical 5 m/s2

Verfahrgeschwindigkeit Bei 5 m horizontalem Weg bis 200 m/min./At 5 m horizontal traverse up to 200 m/min. Traverse speedBemerkung In der Schleppkette oder bei mechanischer Beanspruchung +60 °C./In chain flex application or when stressed machanically +60 °C. RemarkZulassung UL/CSA ApprovalUL-Style PUR: AWM 20234 UL-style

799

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

Flanschstecker mit T-Kodierung, Schraubklemmanschluss, MetallgehäuseMale panel mount connector with T-coding, screw clamp connection, metal housing

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M20 x 1,5 99 0633 500 04

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M16 x 1,5 09 0631 90 04

Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm, tauchlöten/screw clamp, dip solder TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16)/— Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse Zink Druckguss vernickelt/zinc diecasting nickel plated, CuZn (Messing vernickelt/brass nickel plated) Material of housing

Flanschstecker mit T-Kodierung, von vorn verschraubbar, tauchlöten, MetallgehäuseMale panel mount connector with T-coding, front fastened, dip solder, metal housing

M12 x

1

32

2 7

Ø 20

,2

M20 x

1,5

SW 19mm

Ø 22

,2

SW 18mm SW 22mm SW 17,7mmM1

2 x 1

Ø 21

21

211

SW 13,4mmSW 19mm SW 17mm

M16 x

1,5

Ø 1,2 Ø

18

32,8 5

max. 4,5

29

800

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M16 x 1,5 09 0631 300 04

Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart Litzen (AWG 16)/single wires (AWG 16) TerminationAnschlussquerschnitt — Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse PA Material of housing

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M16 x 1,5 09 0631 320 04

Flanschstecker, von vorn verschraubbar, mit Litzen, T-Kodierung, KunststoffgehäuseMale panel mount connector, front fastened, with single wires, T-Coding, plastic housing

Flanschstecker mit Litzen, T-Kodierung, KunststoffgehäuseMale panel mount connector with single wires, T-Coding, plastic housing

M12 x

1

M16 x

1,5

SW 13,4mmSW 17mm

20

213

23,6200

Ø 18

M12 x

1M1

6 x 1,

5

SW 22mm SW 17mm

21211

200

Ø 24

Ø 18

SW 13,4mm

5

23,6

max. 4,5

801

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

Flanschstecker mit T-Kodierung, von vorn verschraubbar, mit Litzen, MetallgehäuseMale panel mount connector with T-coding, front fastened, with single wires, metal housing

Flanschstecker mit T-Kodierung, mit Litzen, MetallgehäuseMale panel mount connector with T-coding, with single wires, metal housing

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M16 x 1,5 09 0631 700 04

Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart Litzen (AWG 16)/single wires (AWG 16) TerminationAnschlussquerschnitt — Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse Zink Druckguss vernickelt/zinc diecasting nickel plated Material of housing

M12 x

1

23,55

2

SW 17mm

1320

200

M16 x

1,5

Ø 18

SW 13,4mm

M12 x

1

Ø 21

M16 x

1,5

Ø 18

21

211

SW 13,4mmSW 19mm SW 17mm

2,8

max. 4,5

23,6200

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M16 x 1,5 09 0631 120 04

802

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart Litzen (AWG 16)/single wires (AWG 16) TerminationAnschlussquerschnitt — Wire gaugeKabeldurchlass — Cable outletSchutzart IP40 ohne Dichtung/without sealing, IP67 mit Dichtung siehe Zubehör/with sealing see accessories Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse CuZn (Messing vernickelt/brass nickel plated) Material of housing

Flanschstecker mit T-Kodierung, mit Litzen, MetallgehäuseMale panel mount connector with T-coding, with single wires, metal housing

M12 x

1

SW 22mm

2013

Ø 23

M20 x

1,5

3,6

200

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M20 x 1,5 09 0631 642 04

Flanschstecker mit T-Kodierung, PViereckflansch, mit Litzen, MetallgehäuseMale panel mount connector with T-coding, rectangular flange, with single wires, metal housing

PolzahlContacts

Bestell-Nr.Ordering-No.

4 09 0631 070 04

2014

14

Ø 3,2

M12 x

1

Ø 12

20

320015

23,6

803

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

Flanschdose mit T-Kodierung, Schraubklemmanschluss, MetallgehäuseFemale panel mount connector with T-coding, screw clamp connection, metal housing

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M20 x 1,5 99 0634 500 04

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M16 x 1,5 09 0632 90 04

Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm, tauchlöten/screw clamp, dip solder TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16)/— Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass), CuSn (Bronze/bronze) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse Zink Druckguss vernickelt/zinc diecasting nickel plated, CuZn (Messing vernickelt/brass nickel plated) Material of housing

Flanschdose mit T-Kodierung, von vorn verschraubbar, tauchlöten, MetallgehäuseFemale panel mount connector with T-coding, front fastened, dip solder, metal housing

M12 x

1

26,9

2 7

Ø 20

,2

M20 x

1,5

Ø 22

,2

SW 19mm

SW 18mm SW 22mm SW 17,7mm

Ø 21

M16 x

1,5

Ø 1,2 Ø

18

17,5

7,5

SW 13,4mmSW 19mm SW 17mm

32,8 5

max. 4,5M1

2 x 1

2

25,5

804

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M16 x 1,5 09 0632 300 04

Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart Litzen (AWG 16)/single wires (AWG 16) TerminationAnschlussquerschnitt — Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuSn (Bronze/bronze) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse PA Material of housing

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M16 x 1,5 09 0632 321 04

Flanschdose, von vorn verschraubbar, mit Litzen, T-Kodierung, KunststoffgehäuseFemale panel mount connector, front fastened, with single wires, T-Coding, plastic housing

Flanschdose mit Litzen, T-Kodierung, KunststoffgehäuseFemale panel mount connector with single wires, T-Coding, plastic housing

M12 x

1

M16 x

1,5

SW 13,4mmSW 17mm

19,5

211,5

23,4200

Ø 18

M12 x

1PG

9

SW 22mm SW 17mm

Ø 24

Ø 18

SW 13,4mm

17,52

2006

23,4

max. 4,5

805

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

Flanschdose mit T-Kodierung, von vorn verschraubbar, mit Litzen, MetallgehäuseFemale panel mount connector with T-coding, front fastened, with single wires, metal housing

Flanschdose mit T-Kodierung, mit Litzen, MetallgehäuseFemale panel mount connector with T-coding, with single wires, metal housing

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M16 x 1,5 09 0632 700 04

Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart Litzen (AWG 16)/single wires (AWG 16) TerminationAnschlussquerschnitt — Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuSn (Bronze/bronze) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse Zink Druckguss vernickelt/zinc diecasting nickel plated Material of housing

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M16 x 1,5 09 0632 120 04

M12 x

1

23,4

11,5 200

M16 x

1,5

1,5 2

19,5

Ø 18

SW 17mmSW 13,4mm

Ø 21

M16 x

1,5

Ø 18

17,5

2

SW 13,4mmSW 19mm SW 17mm

2,8

max. 4,5

23,4

M12 x

1

200

7,5

806

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

Abbildung / Figure

Maßzeichnung / Drawing

Bestell-Daten / Order Data

Technische Daten / Specifications

Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart Litzen (AWG 16)/single wires (AWG 16) TerminationAnschlussquerschnitt — Wire gaugeKabeldurchlass — Cable outletSchutzart IP40 ohne Dichtung/without sealing, IP67 mit Dichtung siehe Zubehör/with sealing see accessories Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuSn (Bronze/bronze) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse CuZn (Messing vernickelt/brass nickel plated) Material of housing

Flanschdose mit T-Kodierung, mit Litzen, MetallgehäuseFemale panel mount connector with T-coding, with single wires, metal housing

PolzahlContacts

BefestigungsgewindeFixing thread

Bestell-Nr.Ordering-No.

4 M20 x 1,5 09 0632 642 04

M12 x

1

SW 22mm

M20 x

1,5

19,511,5 3,9

200

Ø 23

1,5

Flanschdose mit T-Kodierung, Viereckflansch, mit Litzen, MetallgehäuseFemale panel mount connector with T-coding, rectangular flange, with single wires, metal housing

PolzahlContacts

Bestell-Nr.Ordering-No.

4 09 0632 070 04

2014

14

Ø 3,2

Ø 12

18,5

320013,5

23,4

M12 x

13,5

807

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T/-L

MontageanleitungAssembly instruction

Abisoliermaße Fanschsteckverbinder, Schraubklemmanschluss, nicht schirmbarStrip measures panel mount connectors, screw clamp connection, not shieldable

PolbilderContact arrangements

Stifteinsatz (Steckseite)Male insert (mating side)

Buchseneinsatz (Steckseite)Female insert (mating side)

4 pol4 contacts

1234

X2,550,00

–2,550,00

Y0,00

–2,550,002,55

1

23

4

45°

1 braun/brown2 weiß/white3 blau/blaue4 schwarz/black

1234

X–2,550,002,550,00

Y0,00

–2,550,002,55

1

23

4

45°

1 braun/brown2 weiß/white3 blau/blaue4 schwarz/black

LitzenquerschnittWire cross sectionmax. 1,5 mm2 4-polig/contacts

KontakteinsatzContact insert4 x 90° verdrehbar/adjustable

AnzugsdrehmomentTightening torqueSW 19 Mutter/nut = 5 Nm M18 x 0,75M20 x 1,5 = 5 Nm

SW 19mm

20 abmanteln

dismantle

abisolieren

strip5

PG 9M16x1,5

APG 9M16x1,5

B16,217,0

C15,316,1

AB

45°

C

1 x 45°13,5 alternativ/alternativ

Mit DurchgangsbohrungWith bore hole

Mit Gewinde, einschraubbarWith thread to screw in

Anzugsdrehmoment/Tightening torque

Metallgehäuse/Metal housing 6,25 NmKunststoffgehäuse/Plastic housing 3,75 Nm

Mit Fläche als VerdrehschutzWith flats as anti-rotation device

MontageausschnittPanel cut out

FlanschsteckverbinderPanel mount connectors

4+FE pol L-Kodierung4+FE contacts L-Coding

1234FE

X2,801,73

–1,73–2,800,00

Y0,91

–2,38–2,38

0,912,94

4

3 2

1 1 braun/brown2 weiß/white3 blau/blaue4 schwarz/blackFE grau/grey

1234FE

X–2,80–1,731,732,800,00

Y0,91

–2,38–2,38

0,912,94

1

2 3

4 1 braun/brown2 weiß/white3 blau/blaue4 schwarz/blackFE grau/grey

808

Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T

MontageausschnittPanel cut out

Flanschsteckverbinder, von vorn verschraubbarPanel mount connectors, front fastened

Flanschsteckverbinder positionierbarPanel mount connectors positioning possible

Flanschsteckverbinder SchraubklemmanschlussPanel mount connectors screw clamp connection

C

1 x 45°13,5

Mit DurchgangsbohrungWith bore hole

max. 4,5

PG 9M16x1,5

C15,316,1

Anzugsdrehmoment/Tightening torque

Metallgehäuse/Metal housing 6,25 NmKunststoffgehäuse/Plastic housing 1,25 Nm

Mit Fläche als VerdrehschutzWith flats as anti-rotation device

Ø 21

M20 x

1,5

45°

1 x 45°

Ø 20

,1

min. 2max. 3,5

Anzugsdrehmoment/Tightening torque M20 x 1,5 5 Nm

Mit DurchgangsbohrungWith bore hole

Mit Gewinde, einschraubbarWith thread to screw in

M16 x

1,5

Anzugsdrehmoment/Tightening torque

Metallgehäuse/Metal housing 6,25 NmKunststoffgehäuse/Plastic housing 1,25 Nm

Flanschsteckverbinder VierkantflanschPanel mount connectors square flange

Zubehör siehe Seite 593–599./Accessories see page 593–599.

Ø 12,2

14

14 M3 (4

x)

0,5 x 45°

Voraussetzungen für Schutzart IP67:1. Verwendung von Dichtung, Best.-Nr. 16 0959 0002. Gewinde M3 (4x) als Gewindesacklöcher oder Schraubenköpfe abgedichtet

Requirements for Degree of protection IP67:1. Use of sealing, Ordering-No. 16 0959 0002. M3 thread (4x) sealed as a threaded blind holes or screw heads

MA_M12-A_S_T_Vierkant.ai