Diamant-Abrichtwerkzeuge...Diamant-Abrichtwerkzeuge Diamond Dressing Tools Einzel-Abrichtdiamanten...
Transcript of Diamant-Abrichtwerkzeuge...Diamant-Abrichtwerkzeuge Diamond Dressing Tools Einzel-Abrichtdiamanten...
Diamant-AbrichtwerkzeugeDiamond Dressing Tools
2
®
®
JAKOB LACH GmbH & Co. KGDonaustrasse 17 D-63452 HanauTelefon +49-61 81-103 0Fax +49-61 81-103 [email protected]
Trad
ition se
it
1922
Diamant-AbrichtwerkzeugeDiamond Dressing Tools
InhaltsverzeichnisIndex
Lach-Diamant-Abrichtplatten
Diamond Dressing Blades
Lach-Diamant-Vielkorn-Abrichter
Diamond Multi Point Dressers
Lach-Diamant-Aggregate
Diamond Grit Dressers
Lach-Diamant-Abrichträdchen
Diamond Wheel Dressers
Lach-Diamant-Vielkorn-Handabrichter
Diamond Multi Point Hand Dressers
Lach-drebodress PKD-Dreikant-Abrichter
drebodress PCD Triangular Dressers
Lach-Einzel-Abrichtdiamanten
Diamond Single Point Dressers
Lach-Profil-Abrichtdiamanten, geschliffen
Shaped Diamond Dressers
Natur-AbrichtdiamantenDiamond Single Point Dressers
®
Vielkorn-Diamant-AbrichtwerkzeugeDiamond Multi Point Dressing Tools
4 - 7
8 - 9
10 - 13
14 - 15
16 - 17
18
19
19
PKD-AbrichtwerkzeugePCD Dressing Tools
SeitePage
®
Resetting and resharpening of single point and shaped diamond dressersOwn service facility for natural diamond since 1922
Diamant-AbrichtwerkzeugeDiamond Dressing Tools
Einzel-Abrichtdiamanten eignen sich für das Geradeabrichten von Schleifscheibensowie das Abrichten einfacher Profile. Je nach Diamant-Qualität haben die Diamantenmehrere Naturspitzen, die durch Umfassen (Reparatur-Service) einsatzbereit werden.Einweg-Abrichtdiamanten mit einer Arbeitsspitze lassen sich nicht umfassen.
Single point diamond dressing tools are suitable for flat dressing of grinding wheels as well asfor dressing profiles. Depending on the diamond quality the diamonds have several natural pointswhich will be ready for use by resetting. Disposable diamond single point dressers with one pointcannot be reset.
Profil-Abrichtdiamanten finden ihren Einsatz, wo höchste Profilgenauigkeiterforderlich ist. Abhängig von der Diamantgröße ist ein mehrfaches Nachschleifenmöglich (Reparatur-Service).
Shaped diamond dressers are used where highest profile precision is necessary. Dependingon the diamond size they can be resharpened several times (repair service).
Diamant-Abrichtplatten sind zeitgemäße Universal-Abrichtwerkzeuge zumGeradeabrichten und Profilieren. Konstantes Einsatzverhalten während dergesamten Lebensdauer zeichnen diese Werkzeuge aus. Sie ersetzen in vielenFällen Einzel- bzw. Profil-Abrichtdiamanten.
Diamond dressing blades are modern universal dressing tools for flat dressing and profiledressing. These tools excel in constant performance during the entire tool life. In many casesthey replace single point respectively shaped diamond dressers.
Vielkorn-Abrichtdiamanten sind nur einsetzbar zum Geradeabrichten vonUmfang- und Planflächen. Als robustes Abrichtwerkzeug sind Vielkorn-Abrichtdiamanteneinfach zu handhaben und ersetzen in vielen Fällen den Einzel-Abrichtdiamanten. Eingroßer Vorteil sind höhere Abrichtvorschubgeschwindigkeiten und Zustellbeträgesowie die Möglichkeit, nahezu alle Schleifscheibenkörnungen von grob bis feinabzurichten.
Diamond multi point dressers can only be used for flat dressing of periphery and lateral faces.As robust dressing tools multi point dressers are easy to handle and often replace the diamondsingle point dresser. Important advantages are higher dressing feed rates and infeeds as well asthe possibility to dress almost all grinding wheel grain sizes from coarse to fine.
Diamant-Aggregate sind ähnlich aufgebaut wie Vielkorn-Abrichtdiamanten und auchnur für den Einsatz Geradeabrichten von Umfang- und Planflächen geeignet.Haupteinsatzgebiet ist jedoch das Abrichten feiner und feinsterSchleifscheibenkörnungen. Durch geringen Schnittdruck sehr gut geeignet fürInnenschleifkörper und Spitzprofil-Schleifscheiben.
Diamond grit dressers have a similar structure as diamond multi point dressers and are onlysuitable for flat dressing of periphery and lateral faces. Their main field of application, however,is dressing fine and finest grinding wheel grains. Due to the low cutting pressure they are suitableespecially for dressing internal bonded abrasives and grinding wheels with V-profile.
2
WerkzeugauswahlTool Selection
Vielkorn-AbrichtdiamantenDiamond Multi Point Dressers
Reparatur-Service für Umfassen und Nachschleifen von Einzel- und ProfilabrichtdiamantenEigene Naturdiamant-Schleiferei seit 1922
Einzel-ProfilabrichtdiamantenSingle Point Profile Dressing Tools
Profil-AbrichtdiamantenShaped Diamond Dressers
Diamant-AbrichtwerkzeugeDiamond Dressing Tools
Vielkorn-AbrichtdiamantenDiamond Multi Point Dressers
PKD-AbrichtwerkzeugePCD Dressing Tools
3
Diamanträdchen finden ihren Einsatz je nach Ausführung zum Geradeabrichten(speziell spitzenlos schleifen) und beim Profilieren. Durch die punktförmige Berührungvon Diamantnadeln haben Rädchen ähnliche Funktionsmerkmale wie Einzel-Abrichter.Viele einzelne Diamantnadeln können durch Weiterdrehen der Reihe nach verbrauchtwerden.
Diamond wheel dressers are used, according to their design, for flat dressing (especially forcenterless grinding) and for profiling. Due to the punctual contact of the diamond needles thewheel dressers have similar operating features as single point dressers. Many individual diamondneedles can be used one after the other by turning.
Diamant-Vielkorn-Handabrichter sind Universal-Abrichtwerkzeuge zum Handabrichtenauf Schleifböcken bzw. aller Arten von Schleifscheiben. Durch Verwendung vonKleindiamanten und einer speziellen Sintermetallbindung ist Trockenabrichtenproblemlos möglich.
Diamond multi point hand dressers are universal dressing tools for hand dressing on benchstand grinders respectively for all kinds of grinding wheels. Due to the use of small diamondsand a special sintered-powder metal bond dry dressing is possible without any problems.
Drebodress -PKD-Dreikant-Abrichtplatten sind eine moderne Alternative zu diversenAbrichtwerkzeugen für den Einsatz Geradeabrichten bzw. Profilieren.Bevorzugt verwendbar beim Abrichten feiner bis mittlerer Schleifscheiben aufInnenschleifmaschinen.
Drebodress PCD triangular dressing blades are a modern alternative to various dressing toolsfor flat dressing respectively profiling applications - preferred for the dressing of fine to mediumgrinding wheels on internal grinding machines.
Resetting and resharpening of single point and shaped diamond dressersOwn service facility for natural diamond since 1922
®
®
WerkzeugauswahlTool Selection
Einzel-AbrichtdiamantenDiamond Single Point Dressers
Nach wie vor bietet der Einzel-Diamant die Gewähr, “universell” abzurichten. LACH-DIAMANT empfiehlt dazu,einzelne Diamanten nicht zu klein zu wählen, denn Klein-Diamanten - einzeln zum Angriff gebracht - verschleissenschnell beim Abrichten mittlerer und großer Schleifscheiben-Durchmesser und -Breiten.The single point diamond still offers the assurance to dress universally. LACH-DIAMANT recommends to choose the singlediamonds large enough, because single diamonds, when subjected to the task, wear rapidly when dressing medium and largegrinding wheel diameters and widths.
Auswahl der Diamantgröße im Verhältnis zur SchleifscheibengrößeSelection of Diamond Size in Comparison to Grinding Wheel Size
0 200 400 600 800 1000 1200
Durchmesser D (mm) - Diameter D (mm)
2.0 cl
260
240
220
200
180
160
140
120
100
80
60
40
20
1,75 cl1,5 cl
1,0 cl0,75 cl
0,5 cl0,25 cl
Bre
ite B
(mm
) -
W
idth
(mm
)
Für mittlere Schleifscheibenhärten gelten allgemeine Richtlinien entsprechend Tabelle. Bei besonders hartenSchleifscheiben empfiehlt es sich, den jeweils nächst größeren Diamant zu verwenden.
For medium hardness of the grinding wheels the general guidelines according to Table apply. In case of particularlyhard grinding wheels, it is recommended to use the next larger diamond size.
4
Reparatur-Service für Umfassen und Nachschleifen von Einzel- und ProfilabrichtdiamantenEigene Naturdiamant-Schleiferei seit 1922
B
D
Diamant-AbrichtwerkzeugeDiamond Dressing Tools
Bestellangaben:
a) Diamant-Größe (crt.)b) Diamant-Qualitätc) Halter
Order Details:
a) Size of diamond (crt.)b) Diamond qualityc) Holder
Rohdiamanten aus eigenen ImportenNatural Diamonds from own Imports
Bestellbeispiel:Einzel-Abrichtdiamant 1,0 crt. - Standard-MK1
Order Example:Single point dressing diamond 1,0 crt. - Standard MK1
Ausreichende Kühlung erforderlich!Rechtzeitig umfassen lassen!Sufficient cooling is necessary!Have your dressing tool reset in good time!
5
SUPER
ZO
Top-Qualität 5-6 Naturspitzen, regelmäßige Oktaeder, keine Einschlüsse, keine RisseTop quality, 5-6 natural points, regular octahedrons, no inclusions, no cracks
Sehr gute Industrie-Qualität, 3-5 Naturspitzen, regelmäßige Oktaeder, kaum Einschlüsse, keine RisseVery good industrial quality, 3-5 natural points, regular octahedrons, hardly any inclusions, no cracks
Gute Industrie-Qualität, 2-3 Naturspitzen, geringe Einschlüsse und RisseGood industrial quality, 2-3 natural points, slight inclusions and cracks
Mindestens 2 Naturspitzen, geringe Einschlüsse und RisseMinimum 2 natural points, slight inclusions and cracks
1-2 Naturspitzen, geringe Einschlüsse und Risse1-2 natural points, slight inclusions and cracks
Auswahl der Diamant-QualitätenSelection of the Diamond Grade
STANDARD
SAMANT
ZO-PLUS
ZO
Diamant vor dem EinsatzDiamond before use
EinsatzhinweiseInstructions for Use
Resetting and resharpening of single point and shaped diamond dressersOwn service facility for natural diamond since 1922
Reparatur-Eildienst!Umfassen und Nachschleifen in eigener Diamant-Schleiferei!
Repair Rush Service!Resetting and resharpening in our service facility fornatural diamonds!
Halt! Jetzt umfassen imLACH-Reparatur-Eildienst
Have your tool reset in theLACH repair express service now.
Nicht so! Fassung angeschliffen,Diamant-Verlust
Not like this! Mounting damaged, diamond loss
Einzel-AbrichtdiamantenDiamond Single Point Dressers
Bestell-Nr. Karat* Halter** Artikel-Nr. Artikel-Nr. Artikel-Nr.
Lager-Programm - Stock Available
Diamant-Qualitäten* - Diamond Grades
Standard Samant ZO
Order No. Carat* Holder** Article No. Article No. Article No.
EW01 0,10 MKO 11002000 MK1 11002002 EV 8x90 11002008 EP 1:20 11002019
* andere Diamantgrößen und Qualitäten lieferbar Other diamond sizes and grades available
** andere Halter nach Angaben bzw. Zeichnung lieferbar Other holders available on request
6
Einweg-AbrichtdiamantenOne Way Dressers
EA025 0,25 MKO 11005300 11005200 11005100 MK1 11005302 11005202 11005102 EV 8x90 11005308 11005208 11005108
EP 1:20 11005319 11005219 11005119
EA035 0,35 MKO 11008300 11008200 11008100 MK1 11008302 11008202 11008102 EV 8x90 11008308 11008208 11008108 EP 1:20 11008319 11008219 11008119
EA050 0,50 MKO 11011300 11011200 11011100 MK1 11011302 11011202 11011102 EV 8x90 11011308 11011208 11011108 EP 1:20 11011319 11011219 11011119
EA075 0,75 MKO 11016300 11016200 11016100 MK1 11016302 11016202 11016102 EV 8x90 11016308 11016208 11016108 EP 1:20 11016319 11016219 11016119
EA100 1,00 MKO 11021100 MK1 11021202
EA125 1,25 MKO-K 11026301 11026201 11026101 MK1 11026302 11026202 11026102
EA150 1,50 MKO-K 11031301 11031201 11031101 MK1-K 11031303 11031203
EA200 2,00 MKO-K 11041301 11041201 11041101 MK1-K 11041303 11041203 11041103
Reparatur-Service für Umfassen und Nachschleifen von Einzel- und ProfilabrichtdiamantenEigene Naturdiamant-Schleiferei seit 1922
11021300 11021302
11021200 11021102
11031103
Halter für Einzel-AbrichtdiamantenHolders for Diamond Single Point Dressers
MKO MKO-K MK1 MK1-K DIN 1820 D DIN 1820 E
EJ EK EL EO EP Kegel 1:13,15 Kegel 1:10 Kegel 1:13,15 Kegel 1:13,15 Kegel 1:20
Höfler Höfler Höfler Voumard Lidköping Lidköping Kegel 1:50
EF Landis EN Kolb EV Deckel EX Niles EY Niles EW Kegel 1:50
Andere Halter nach Angabe lieferbarOther holders available on request
7
Loroch
Resetting and resharpening of single point and shaped diamond dressersOwn service facility for natural diamond since 1922
Profil-AbrichtdiamantenShaped Diamond Dressers
Für LACH-Profil-Abrichtdiamanten werden besonders ausgesuchte Natur-Diamantqualitäten verwendet.Im Interesse einer guten Stabilität der Werkzeugschneide sollte der größtmögliche Winkel und Radius gewähltwerden, den das Scheibenprofil zuläßt.Only the best and especially selected natural diamond grades are used for LACH shaped diamond dressers.For good cutting edge stability choose the largest possible angle and radius which the grinding wheel profile allows.
Schaudt 70/04 SCHAUDT 70° 0,4 1,00 11121260 1,50 11131260
Fortuna 55/02 FORTUNA 55° 0,2 1,00 11121273 1,50 11131273
Fortuna 75/02 75° 0,2 1,00 11121271 1,50 11131271
Diaform DIAFORM 30/125 L *** 30° 0,125 0,33 11107031 30/250 L 30° 0,250 0,33 11107049 40/125 L 40° 0,125 0,33 11107007 40/250 L 40° 0,250 0,33 11107008 40/500 L 40° 0,500 0,33 11107009 60/125 L 60° 0,125 0,33 11107010 60/250 L 60° 0,250 0,33 11107011 60/500 L 60° 0,500 0,33 11107012 40/R L ca. 40° - 0,33 11107020 60/R L ca. 40° - 0,33 11107023
MSO 60/01 MSO 60° 0,2 1,00 11121280
JUNG RA 38-53 JUNG 50° 0,1 0,50 11111250 0,33 11107250
Bestellbeispiel:Profil-Abrichtdiamant System Diaform 40/125 L Order Example:Shaped diamond dresser system Diaform 40/125 L
Bestell-Nr. Maschine Winkel** Radius** (mm) Diamantgröße* (Karat) Artikel-Nr. Order No. Machine Angle** Radius** (mm) Diamond Size*(carat) Article No.
* andere Diamantgrößen auf Anfrage other diamond sizes on request*** auch Halterlänge K oder EL lieferbar Holder length K or EL available** andere Winkel und Radien auf Anfrage other angles and radii on request
Sonderfassungen nach Zeichnung lieferbarSpecial holders acc. to drawing available
8
Loroch
Reparatur-Service für Umfassen und Nachschleifen von Einzel- und ProfilabrichtdiamantenEigene Naturdiamant-Schleiferei seit 1922
Bestellbeispiel:Profil-Abrichtdiamant System Diaform 40/125 L Order Example:Shaped diamond dresser system Diaform 40/125 L
Halter für Profil-AbrichtdiamantenHolders for Shaped Diamond Dressers
Halterbeispiele und Einbaumaße (andere Halter nach Angaben möglich).Examples of holders and mounting dimensions (other holders possible according to your specifications)
Schaudt
Fortuna
Diaform
MSO
JUNG RA 38-53
I=35 mm (K), 45,5 mm (L)57,8 mm (EL)α = 30°-40°-60°R = 0,125 mm,0,250 mm, 0,500 mm
9
ZylindrischMaße D-L-R-anach AngabeCylindricalmeasurements D-L-R-aaccording to indication
Resetting and resharpening of single point and shaped diamond dressersOwn service facility for natural diamond since 1922
Diamant-AbrichtplattenDiamond Dressing BladesKornabrichtplatten - handgesetzt, Wolfram oder HartmetallbindungGrit Dressing Blades - Set by Hand - Bond TC
K-600-W 11210023 K-600-H-M 11210027 20 15 33 0,75 D501
K-601-W 11210000 K-601-H-M 11210500 20 15 33 0,90 D711
K-603-W 11210001 K-603-H-M 11210501 20 15 33 1,15 D1001
K-605-W 11210002 K-605-H-M 11210502 20 15 33 1,40 D1181
K-650-W 11210022 K-650-H-M 11210026 20 10 28 0,75 D501
K-651-W 11210003 K-651-H-M 11210503 20 10 28 0,90 D711
K-653-W 11210004 K-653-H-M 11210504 20 10 28 1,15 D1001
K-655-W 11210005 K-655-H-M 11210505 20 10 28 1,40 D1181
K-700-W 11210021 K-700-H-M 11210025 10 15 33 0,75 D501
K-701-W 11210006 K-701-H-M 11210506 10 15 33 0,90 D711
K-703-W 11210007 K-703-H-M 11210507 10 15 33 1,15 D1001
K-705-W 11210008 K-705-H-M 11210508 10 15 33 1,40 D1181
K-750-W 11210020 K-750-H-M 11210024 10 10 28 0,75 D501
K-751-W 11210009 K-751-H-M 11210509 10 10 28 0,90 D711
K-753-W 11210010 K-753-H-M 11210510 10 10 28 1,15 D1001
K-755-W 11210011 K-755-H-M 11210511 10 10 28 1,40 D1181
Auswahl der Abrichtplattengröße zur SchleifscheibengrößeSelection of Dressing Blades Size to Grinding Wheel Size
400
300
200
100
100 200 300 400 500 600 700 800
Scheibendurchmesser (mm) - Wheel Diameter
Sch
eib
enb
reite
(mm
) -
Whe
el W
idth
Auswahl der Diamant-Körnung zur SchleifscheibenkörnungSelection of Diamond Grit to Grinding Wheel Grit
Diamant-Körnung Scheiben-Körnung Diamond Grit Wheel Grit
D501D711D1001D1181
120 - 18080 - 12054 - 8036 - 54
Auswahl der Bindung zur SchleifmittelartSelection of Bond to Type of Abrasive
W (Wolfram) für Korund W (Tungsten) for Aluminium Oxide
H (Hartmetall) für Siliziumkarbid (SIC) TC for Silicone Carbide (SIC)
Bestellangaben:
a) ohne Halter b) mit Schwenkhalter c) starr gelötet in Halter
Order Details:
a) without holderb) with swivel holderc) soldered rigidly in holder
Bestellbeispiel - Order Example:
a) K-601-W b) K-705-W-MK1 c) K-653-W-MK1 starr 10 Grad rechts geneigt a) K 601-W b) K-705-W-MK1 c) K653-W-MK1 rigid 10 degrees inclined to the right
10
Bindung W Bindung HBond W Bond TC
K-700 - 705K-750 - 755
K-600 - 605K-650 - 655
Bestell-Nr. Artikel-Nr. Bestell-Nr. Artikel-Nr. Order No. Article No. Order No. Article No. Diamond Grit
B L L1 X Diam.-Körnung
Bindung W - Bond W Bindung H - Bond TC
Reparatur-Service für Umfassen und Nachschleifen von Einzel- und ProfilabrichtdiamantenEigene Naturdiamant-Schleiferei seit 1922
B X
L
L1
BB+3
L
x
L1
Diamant-AbrichtplattenDiamond Dressing Blades
Nadelabrichtplatten - handgesetzt, Wolfram- oder HartmetallbindungNeedle Dressing Blades - Set by Hand - Bond TC
N-614-W 1121 0700 N-614-H-M 1121 0800 20 15 33 1,80 1,4
N-614-1-W 1121 0713 N-614-1-H-M 1121 0813 20 15 33 1,15 1,1
N-614-2-W 1121 0712 N-614-2-H-M 1121 0812 20 15 33 0,90 0,8
N-614-3-W 1121 0711 N-614-3-H-M 1121 0811 20 15 33 0,75 0,6
N-664-W 1121 0701 N-664-H-M 1121 0801 20 10 28 1,80 1,4
N-664-1-W 1121 0723 N-664-1-H-M 1121 0823 20 10 28 1,15 1,1
N-664-2-W 1121 0722 N-664-2-H-M 1121 0822 20 10 28 0,90 0,8
N-664-3-W 1121 0721 N-664-3-H-M 1121 0821 20 10 28 0,75 0,6
N-714-W 1121 0702 N-714-H-M 1121 0802 10 15 33 1,80 1,4
N-714-1-W 1121 0733 N-714-1-H-M 1121 0833 10 15 33 1,15 1,1
N-714-2-W 1121 0732 N-714-2-H-M 1121 0832 10 15 33 0,90
N-714-3-W 1121 0731 N-714-3-H-M 1121 0831 10 15 33 0,75 0,6
N-764-W 1121 0703 N-764-H-M 1121 0803 10 10 28 1,80 1,4
N-764-1-W 1121 0743 N-764-1-H-M 1121 0843 10 28 1,15 1,1
N-764-2-W 1121 0742 N-764-2-H-M 1121 0842 10 0,8
N-764-3-W 1121 0741 N-764-3-H-M 1121 0841 10 10 28 0,75 0,6
Auswahl der Abrichtplattengröße zur SchleifscheibengrößeSelection of Dressing blades Size to Grinding Wheel Size
100 200 300 400 500 600 700 800
Scheiben Ø (mm) - Wheel Ø (mm)
Auswahl der Diamant-Nadeln zur SchleifscheibenkörnungSelection of Diamond Needles to Grinding Wheel Grit
Nadel Ø Scheiben-Körnung Needle Ø Wheel Grit
1,401,10,80,6
36 - 6060 - 80
80 - 120120 -180
Auswahl der Bindung zur SchleifmittelartSelection of Bond to Type of Abrasive
W (Wolfram) für Korund W (Tungsten) for Aluminium Oxide
H (Hartmetall) für Siliziumkarbid (SIC) TC for Silicone Carbide (SIC)
Bestellangaben:
a) ohne Halter b) mit Schwenkhalter c) starr gelötet in Halter
Order Details:
a) without holderb) with swivel holderc) soldered rigidly in holder
Bestellbeispiel - Order Example:
a) N-614-W b) N-614-W-MK1 c) N-664-W-MK1
starr 10 Grad rechts geneigt
a) N 614-W b) N-614-W-MK1 c) N-664-W-MK1 rigid 10 degrees inclined to the right
11
400
300
200
100
Sch
eib
enb
reite
(mm
) -
Whe
el W
idth
Bestell-Nr. Artikel-Nr. Bestell-Nr. Artikel-Nr. Order No. Article No. Order No. Article No. Needle Ø
B L L1 X Nadel Ø
Bindung W - Bond W Bindung H - Bond TC
N-714 N-614N-764 N-664
Bindung W Bindung HBond W Bond TC
Resetting and resharpening of single point and shaped diamond dressersOwn service facility for natural diamond since 1922
B X
L
L1 L
B+3B
X
L11
10
0 28 0,90
0,8
MKD-CVD-AbrichtplattenMCD - CVD Dressing Blades
Bild 1 Bild 2Picture 1 Picture 2
12
Andere MKD-CVD-Abrichtplatten nach Angabe lieferbar.Kompatibel mit allen Halterformen - Einsatz mit Schwenkhalter oder starr gelötet in Halter.Other MCD-CVD dressing blades possible acording to your specification.Compatible with all holders - swivel holder or rigid holder.
Anwendungsbereich - Application Range
Abrichten von SchleifscheibenDressing of Grinding Wheels
Lagerprogramm - Stock Available
MKD Monokristalliner Diamant
MCD Monocrystalline Diamond
Best.-Nr. Art.-Nr. Maß L mm Bild Drm. mm KörnungOrder No. Art. No. Measurem. L Picture Diameter Grit Size
M306-10-3 11302500 28 1 0,6 bis 500 80 - 150
M308-10-3 11302501 28 1 0,8 bis 500 60 - 80
M312-10-3 11302502 28 1 1,2 bis 500 46 - 60
M306-20-5 11302505 28 2 0,6 > 500 80 - 150
M308-20-5 11302506 28 2 0,8 > 500 60 - 80
M312-20-5 11302507 28 2 1,2 > 500 46 - 60
Reparatur-Service für Umfassen und Nachschleifen von Einzel- und ProfilabrichtdiamantenEigene Naturdiamant-Schleiferei seit 1922
Lagerprogramm - Stock Available
CVD Diamant - Film (Chemical Vapour Deposition)CVD Diamond Film (Chemical Vapour Deposition)
C406-10-3 11302600 28 1 0,6 bis 500 80 - 150
C408-10-3 11302601 28 1 0,8 bis 500 60 - 80
C412-10-3 11302602 28 1 1,2 bis 500 46 - 60
C406-20-5 11302605 28 2 0,6 > 500 80 - 150
C408-20-5 11302606 28 2 0,8 > 500 60 - 80
C412-20-5 11302607 28 2 1,2 > 500 46 - 60
Halter für Diamant-Abrichtplatten Holders for Diamond Dressing Blades
Halterbeispiele und Einbaumaße (andere Halter nach Angabe möglich).Examples of holders and mounting dimensions (other holders possible, according to your specifications).
SchwenkhalterSwivel holder
Morsekegel 1Morse taper 1
SchwenkhalterSwivel holder
Morsekegel 1 verkürztMorse taper 1 shortened
Starr gerade gelötet im HalterRigidly soldered in holder
Morsekegel 1Morse taper 1
L=20 mm bei Belagtiefe 10 mmL=25 mm bei Belagtiefe 15 mmL= 20 mm at grain depth of 10 mmL = 25 mm at grain depth of 15 mm
Starr geneigt gelötet im HalterRigidly soldered, inclined in holder
Morsekegel 1, FortunaMorse taper 1, Fortuna
Starr gerade gelötet im HalterRigidly soldered in holder
Morsekegel 0Morse taper 0
L=20 mm bei Belagtiefe 10 mmL=25 mm bei Belagtiefe 15 mmL= 20 mm at grain depth of 10 mmL = 25 mm at grain depth of 15 mm
Starr geneigt gelötet im HalterRigidly soldered, inclined in holder
Zylindrischer Halter geneigt, linksCylindrical holder, inclined left
Bitte angeben: Winkel und ob links oder rechts geneigt - Lieferbar α = 6°, 8°, 10°, 12°, und 15°Pleasse indicate: degree of angle and if left or right inclined - Available α = 6, 8, 10, 12 und 15 degrees
13
Resetting and resharpening of single point and shaped diamond dressersOwn service facility for natural diamond since 1922
Diamant-Vielkorn-AbrichterDiamond Multi Point Dressers
Bestell-Nr. Diamant-EinsatzOrder No. Diamond Insert
3/100 1,00 3 1 MKO 11220100
MK1 11220102
6/100 1,00 6 1 MKO 11220300 MK1 11220302
G/250 2,50 durchsetzt MKO 11220600 MK1 11220602
G/500
M/100
M/250
M/500
Inhalt Diamant- Diamant- Lagerprogramm
Karat Anzahl Schichten Content No. of Diamond Halter Artikel-Nr.
Carat Diamonds Layers Holder Article No.
Stock Available
5,00 durchsetzt MKO 11220700 MK1 11220702
impregnaded
head
1,00 durchsetzt MKO 11220800
MK1 11220802
2,50 durchsetzt MKO 11220900 MK1 11220902
5,00 durchsetzt MKO 11221000 MK1 11221002
14
Typ Schleifscheibenkörnung Grinding Wheel Grit3/100 bis Korn 46 to grit 466/100 Korn 46 - 60 grit 40-60G/250-500 Korn 36 - 60 grit 36-60M/100-250-500 Korn 46 - 80 grit 46-80
Für das Grob- und Feinabrichten von Umfangs- und Planflächen an Schleifscheiben. Vielkorn-Abrichter werdenohne Umfassen - wartungsfrei - bis zum letzten Kleindiamant aufgebraucht. For the rough- and fine dressing ofperipheral and plane surfaces on grinding wheels of all diameters and widths. Multi point dressers are without resetting andare used up to the last small diamond.
Reparatur-Service für Umfassen und Nachschleifen von Einzel- und ProfilabrichtdiamantenEigene Naturdiamant-Schleiferei seit 1922
impregnaded
head
impregnaded
head
impregnaded
head
impregnaded
head
500
400
300
200
100
G 250
M 100
Auswahl derVielkorn-Größezur Schleif-scheibengröße
Selection of multi
point dresser to
grinding wheel
dimension
Auswahl des Vielkorn-Types zur SchleifscheibenkörnungSelection of Multi Point Type to Grit of Grinding Wheel
100 200 300 400 500 600 700
Sch
eib
enb
reite
(mm
) - W
heel
Wid
th
G/ 250M/ 2506/ 100
M/100
G/ 500M/ 5003/ 100
�ø14
�ø 1
2
�12
ø 12
8
ø 8
8
ø 12
10
ø 8
�12
ø 12
Scheiben-Ø (mm) - Wheel Diameter
Halter für Diamant-Vielkorn-AbrichterHolders for Diamond Multi Point Dressers
Halterbeispiele und Einbaumaße (andere Halter nach Angaben möglich)Examples of holders and mounting dimensions (other holders possible according to your specifications)
Zylindrischer HalterCylindrical holder
L1 12 mm
Zylindrischer Halter mit KopfCylindrical holder with head
L1 18 mm
Morsekegel 1Morse taper 1
L1 16 mm
Morsekegel 1 mit KopfMorse taper 1 with head
L1 21 mm
Morsekegel 1 geneigtMorse taper 1 inclined
zusätzliche Bestellangaben:Winkel α, lieferbar in 6°, 8°,10°, 12° und 15°Additional ordering details: Degree of angleavailable in 6, 8, 10, 12 and 15 degrees
L1 16 mm, ohne Kopf - 21 mm, mit KopfL1 16 mm, without head - 21 mm, with head
Morsekegel 0 mit KopfMorse taper 0 with head
L1 21 mm
15
Resetting and resharpening of single point and shaped diamond dressersOwn service facility for natural diamond since 1922
L1
L1
L1
L1
L1
L1
Diamantkörnung FEPA Schleifscheibenkörnung Diamond Grit Grinding Wheel Grit
D64 320 - 600D91 220 - 320D126 180 - 220D151 120 - 180D251 100 - 120D356 80 - 100D501 60 - 80D711 54 - 60
W (Wolfram) = Standard-Bindung für KorundW (Tungsten) for aluminium oxide = standard bond
H (Hartmetall) für Siliziumkarbid (SiC)H (Carbide) for silicon carbide (SIC)
BZ (Bronze) für besonders geringe Schnittdrücke
bei sehr feinen Körnungen
BZ (Bronze) for very low cutting pressure with very fine grain
Bestell-Nr. Diamant-Einsatz AbmessungOrder No. Diamond Insert Dimension .
A 408
A 508
A 608
A 804
A 808
Karat Diamantkörnung Auswahl der Aggregat-Größe Carat Diamond Grit zur Scheibengröße
Selection of Size of Aggregate to Wheel Size
0,6 lt. Tabelle
see table
Auswahl der Diamantkörnung zur SchleifscheibenkörnungSelection of Diamond Grit to Grit of Grinding Wheel
Auswahl der Bindung zur SchleifmittelartSelection of Bond to Type of Abrasive
1,0 lt. Tabelle
see table
1,3 lt. Tabelle
see table
1,2 lt. Tabelle
see table
2,4 lt. Tabelle
see table
Bestellbeispiel:
Diamant-Aggregat A 808/D 711 - MK1Order Example:
Diamond grit dressers A 808/D 711 - MK1
Diamant-AggregateDiamond Grit Dressers
Für das Abrichten von Schleifscheiben feinster bis mittlerer Körnungen. Besonders zu empfehlen für Schleif-scheiben mit genauen - spitzwinkligen - Profilen. Aggregate werden ohne Umfassen wartungsfrei aufgebraucht.For the dressing of grinding wheels from fine to medium grit. Especially recommended for grinding wheels with exact, acute-angled profiles.Diamond grit dressers are used without resetting.
100 200 300 400
Bre
ite -
Wid
th
Schleifscheibendurchmesser (mm) Grinding Wheel Diameter
16
Reparatur-Service für Umfassen und Nachschleifen von Einzel- und ProfilabrichtdiamantenEigene Naturdiamant-Schleiferei seit 1922
* andere Diamant-Einsätze lieferbarOther diamond inserts available
A408 A508 A608 A808
40
30
20
10
A804
6 8
8 4
8 8
5 8
4 8
Halter für Diamant-AggregateHolders for Diamond Grit Dressers
Halterbeispiele und Einbaumaße (andere Halter nach Angaben möglich).Examples of holders and mounting dimensions (other holders possible according to your specifications).Die Maße ød und L1 sind auf Seite 16 ersichtlich. Die Maße Ø D und L nach Angabe.Dimensions diameter d and length l1 are listed on page 16.The measurements, diameter D and length L according to your specification.
Zylindrischer HalterCylindrical holder
Zylindrischer HalterCylindrical holder
Zylindrischer Halter mit KopfCylindrical holder with head
Morsekegel 0Morse taper 0
Morsekegel 1Morse taper 1
EP-Kegel 1:20EP taper 1:20
17
Resetting and resharpening of single point and shaped diamond dressersOwn service facility for natural diamond since 1922
Bestellbeispiel:
a) ohne Halter: Diamant-Abrichträdchen RE/220
b) mit Halter: Diamant-Abrichträdchen RE/220-MK1
Bestell-Nr. Abmessung
Order No. Dimension .
RD/050
RC/100
RD/150
RE/220
RE/500
Karat Diamantqualität Artikel-Nr. Abrichten von Schleifscheiben
Carat Diamond Quality Article No. Dressing of Grinding Wheels
Drm. Breite Körnung Schleifart
Diameter Width Grit Type of Grinding
0,5 Nadeldiamanten 11242050 5-100 5-30 80-300 Innenschleifen
Needle diamonds Internal grinding
1,0 Dreieckdiamanten 11241100 50-300 20-200 46-80 Profilschleifen
Triangular diamonds Form grinding
Diamant-AbrichträdchenDiamond Wheel DressersEin rondiertes Abrichtwerkzeug, hergestellt unter Verwendung von Diamant-Nadeln in verschleißfestemSintermetall eingebettet. A round dressing tool with diamond needles in wear-resistant metal bond.
1,5 Nadeldiamanten 11242126 200-500 20-200 80-300 Profilschleifen
Needle diamonds Form grinding
2,0 Nadeldiamanten 11243220 200-750 20-300 46-80 Rund- und
Needle diamonds Flachschleifen
Spitzenlos
Rundschleifen
Round-flat grinding
Centerless grinding5,0 Nadeldiamanten 11243500 500-900 max.300 36-54
Needle diamonds
Order Example:a) Without holder: Diamond wheel dresser RE/220b) With holder: Diamond wheel dresser RE/220-MK1
Halter für Diamant-Abrichträdchen (andere Halter nach Angabe lieferbar)Holder for diamond wheel dressers (other holder available to your specifications)
MK1 Artikel-Nr. - Article No. 16000202 MKO Artikel-Nr. - Article No. 16000201
18
Reparatur-Service für Umfassen und Nachschleifen von Einzel- und ProfilabrichtdiamantenEigene Naturdiamant-Schleiferei seit 1922
drebodress PKD-Dreikant-Abrichtplatten drebodress PCD Triangular Dressing Blades
Für das Abrichten von Korund-Schleifscheiben feiner bis mittlerer Körnung.Besonders zu empfehlen für den Einsatz auf Innenschleifmaschinen.For dressing of aluminium oxide grinding wheels, fine to medium grains. Especially recommended for internal grinding machines.
Best.-Nr. Winkel Radius (mm) Artikel-Nr.
Order No. Angle Radius (mm) Article No.
60/0 60° spitz 18000025
60/100 60° 0,100 18000028
60/125 60° 0,125 18000019
60/200 60° 0,200 18000003
60/250 60° 0,250 18000021
60/400 60° 0,400 18000012
60/500 60° 0,500 18000018
Halter für LACH-drebodress®-PKD-Dreikant-AbrichtplattenHolders for LACH drebodress® PKD Triangular Dressing blades.
Abmessung Artikel-Nr.
Dimension Article No.
MK0 16000109
MK1 16000110
16000106
16000107
16000108
LACH-Diamant-Vielkorn-Handabrichter robust und trotzdem formschön - lange Lebensdauer durch in Sinter-metall eingefasste Natur-Diamanten. Das ideale wirtschaftliche Abrichtwerkzeug für das Trocken-Abrichten aufStähleschleifmaschinen (Schleifböcke).Lach diamond multi point hand dressers are sturdy and have a nice appearance. Long service life through natural diamonds insintered metal. The ideal dressing tool for the dry dressing on grinding machines (floor stand grinders).
Diamant-Vielkorn-HandabrichterDiamond Multi Point Hand Dressers
Type Artikel-Nr. BelagflächeType Article No. Coated Area
VH1 11250001 30 x 10 mm
Abrichtfläche an der Stirnseite (für Umfangscheiben)Dressing surface on face side (for circumferential grinding wheels)
Type Artikel-Nr. BelagflächeType Article No. Coated Area
VH2 11250002 30 x 10 mm
Abrichtfläche seitlich (für Topfscheiben)Dressing surface on side (for cup grinding wheels)
Reparatur.Service für Umfassen und Nachschleifen von Einzel- und ProfilgeschliffenenAbrichtdiamanten. Eigene Naturdiamant-Schleiferei seit 1922.
19
®
®
Resetting and resharpening of single point and shaped diamond dressersOwn service facility for natural diamond since 1922
Ø 8
Ø 10
Ø 12
Diamant-AbrichtwerkzeugeDiamond Dressing Tools
EinsatzhinweiseInstructions for Use
· Diamant-Abrichtwerkzeug kurz und schwingungsfrei einspannen. The diamond dressing tool should be clamped at the maximum fixture length, clamping must be free from vibrations.
· Kräftigen, ununterbrochenen Kühlmittelstrom für hohe Abrichter-Lebensdauer stets vor Abrichtbeginn einschalten. Before starting the dressing operation turn on a strong, constant coolant flow for a long tool life of the dressing tool.
· Bei normaler Schleifscheibengeschwindigkeit abrichten. Use a normal grinding wheel speed for dressing.
· Abrichtzustellung und Abrichtseitenvorschub siehe bitte nachstehende Tabelle: höhere Zustellungen oder größere Vorschübe verringern die Abrichterlebensdauer. Dressing infeed and radial dressing feed are indicated in the following table. Higher infeeds or feeds reduce the dressing tool life.
Einzel-Abricht- 0,01 - 0,03 0,05 - 0,15 diamanten Single Point
Diamond Dressers
Profil-Abricht- 0,01 - 0,02 0,03 - 0,10
diamanten Shaped Diamond Dressers
Abrichtplatten 0,01 - 0,03 0,05 - 0,55
Dressing Blades
Vielkorn- 0,01 - 0,05 0,03 - 0,1 AbrichterMulti Point Diamond Dressers
Aggregate 0,005 - 0,03 0,05 - 0,5
Grit Diamond Dressers
Abrichträdchen 0,01 - 0,05 0,3 - 1
Wheel Dressers
20
Reparatur-Service für Umfassen und Nachschleifen von Einzel- und ProfilabrichtdiamantenEigene Naturdiamant-Schleiferei seit 1922
Diamant- Abricht- Abricht-
Abrichtertyp zustellung seitenvorschubType of Diamond Working Position of Diamond Dressing Tools Dressing Radial mm/Umdr.
Dressing Tool Infeed (mm.) Dressing Infeed
Arbeitsstellungen der Diamant-Abrichtwerkzeuge
Diamant- Abricht- Abricht-
abrichtertyp zustellung seitenvorschubType of Diamond Working Position of Diamond Dressing Tools Dressing Radial mm/Umdr.
Dressing Tool Infeed (mm.) Dressing Infeed
177
Resetting and resharpening of single point and profile dressers.Own service facility for natural diamond since 1922
Lach-Diamant- und CBN-Fertigungsprogramm
LACH Diamond and CBN Manufacturing Programme
Schleifen von Hartmetall und Keramik Diamant-Schleifscheiben u. -Stifte in Kunststoff-, Metall-, Keramik- und Galvanik-Bindungen
Schleifen von HSS und gehärteten Stählen CBN-Schleifscheiben und -Stifte in Kunststoff-, Metall-, Keramik- und Galvanik-Bindungen
Drehen, Bohren, Fräsen von NE-Metallen, dreborid - polykristalline Diamant- und CBN-Zerspanungswerkzeuge geh. Stählen, Guß und HSS
Abrichten von Schleifscheiben Einzel-Abrichtdiamanten, geschliffene Profil- und Kopier-Diamanten, Vielkorn-Abrichter, Abricht-platten und Aggregate, Präzisions-Diamant-Abrichtrollen, drebojet-Diamant-Fräs-Abrichtrollen,Rohdiamanten - auch zur Vorlage - aus eigenen Importen
Feilen, Entgraten, Trennen Diamant-Feilen, Diamant-Entgratungswerkzeuge, Diamant-Trennscheiben für Kunststoffe,Duroplaste, HM-Grünlinge
Läppen und Polieren Diamant-Pasten und Diamant-Spray-MF-Programm
Fräsen, Profilieren, Nuten, Sägen aller DIA-Werkzeugprogramm für alle Industriezweige Holzwerkstoffe und Kunststoffe, und von Laminatfußboden
PKD-Diamant-Schleifmaschinen für Herstellung und Nachschärfen aller polykristallinen Diamant-Werkzeuge
Service-Leistungen Umfassen und Nachschleifen in eigener Diamant-Schleiferei von Einzel-Abrichtdiamanten,Profil- und Kopierdiamanten, Tastdiamanten, Natur-Drehdiamanten, Nachschärfdienste -bundesweit - für polykristalline Diamant- und CBN-Werkzeuge, Nachbelegung galv.gebundener Diamant- und CBN-Werkzeuge, CVD-Beschichtung von Verschleißteilen
Grinding of carbide and ceramics Diamond grinding wheels and pins in resin, metal, vitrified and electroplated bonds
Grinding of HSS and hardened steels CBN grinding wheels and pins in resin, metal, vitrified and electroplated bonds
Turning, boring, milling of non-ferrous dreborid - polycrystalline diamond and CBN cutting toolsmetals hardened steels, cast iron and HSS
Dressing of grinding wheels Single point diamond dressers, polished profiling diamonds, multi point diamond dressers,dressing plates and aggregates, precision diamond dressing rolls, drebojet diamond milldressing rolls, natural diamonds from own imports - for choosing from large diamond lots
Filling, deburring, cutting-off Diamond files, diamond deburring tools, diamond cut off grinding wheels for plastics,duroplasts, sintered carbide
Lapping and polishing Diamond lapping compounds and diamond spray MF programme
Milling, profiling, grooving, sawing of all Diamond tool programme for all industrial sectors wood materials and plastics, and laminate flooring
PCD diamond grinding machines for manufacturing and resharpening of all polycrystalline diamond tools
Service Resetting and resharpening in own diamond resharpening centres of single point diamonddressers, profile and copy diamonds, diamonds for probe, natural diamond turning tools,resharpening service for polycrystalline diamond and CBN tools, recoating of diamond andCBN tools with electroplated bond, CVD-coating of wear parts
dreborid®
Spanende Diamant- und CBN-Werkzeuge – Drehen • Bohren • Fräsen
Diamond and CBN Cutting Tools – Turning • Drilling • Milling
JAKOB LACH GmbH & Co. KGDonaustrasse 17 D-63452 HanauTelefon +49-61 81-103 0Fax +49-61 81-103 [email protected]
12