EN ISO 12944-8allaboutmetallurgy.com/wp/wp-content/uploads/2016/12/… · · 2017-01-21DIN EN ISO...

ICS 87.020; 91.080.10

Descriptors: Paint coatings, corrosion protection, structural steel-work.

Beschichtungsstoffe – Korrosionsschutz von Stahlbauten durchBeschichtungssysteme – Teil 8: Erarbeiten von Spezifikationen fürErstschutz und Instandsetzung (ISO 12944-8 : 1998)

European Standard EN ISO 12944-8 : 1998 has the status of a DIN Standard.

National forewordThis standard has been published in accordance with a decision taken by CEN/TC 139 to adopt, withoutalteration, International Standard ISO 12944-8 as a European Standard.The responsible German body involved in its preparation was the Normenausschuß Anstrichstoffe undähnliche Beschichtungsstoffe (Paints and Varnishes Standards Committee), Technical CommitteeKorrosionsschutz von Stahlbauten.The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are asfollows:

ISO Standard DIN Standard

ISO 2409 DIN EN ISO 2409ISO 2808 DIN ISO 2808 *)ISO 4623 DIN EN ISO 4623ISO 4624 DIN EN 24624ISO 4628-2 DIN ISO 4628-2 *)ISO 4628-3 DIN ISO 4628-3 *)ISO 4628-4 DIN ISO 4628-4ISO 4628-5 DIN ISO 4628-5ISO 4628-6 DIN ISO 4628-6 *)ISO 8503-1 DIN EN ISO 8503-1ISO 8503-2 DIN EN ISO 8503-2ISO 8503-3 DIN EN ISO 8503-3ISO 8503-4 DIN EN ISO 8503-4ISO 11124-1 DIN EN ISO 11124-1ISO 11124-2 DIN EN ISO 11124-2ISO 11124-3 DIN EN ISO 11124-3ISO 11124-4 DIN EN ISO 11124-4ISO 11126-1 DIN EN ISO 11126-1ISO 11126-3 DIN EN ISO 11126-3ISO 11126-4 DIN EN ISO 11126-4ISO 11126-5 DIN EN ISO 11126-5ISO 11126-6 DIN EN ISO 11126-6ISO 11126-8 DIN EN ISO 11126-8

Ref. No. DIN EN ISO 12944-8 : 1998-07English price group 17 Sales No. 1117

12.98

DEUTSCHE NORM July 1998

EN ISO 12944-8

{

Continued on pages 2 and 3.EN comprises 45 pages.

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin.Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).

Corrosion protection of steel structures by protective paint systemsPart 8: Development of specifications for new work and

maintenance (ISO 12944-8 : 1998)English version of DIN EN ISO 12944-8

*) At present at the stage of draft.

This standard supersedesDIN 55928-3, May 1991 edition,and, together withDIN EN ISO 12944-7, July 1998edition, supersedesDIN 55928-7, May 1991 edition.

DIN EN ISO 12944-8 : 1998-07

ISO 12944-1 DIN EN ISO 12944-1ISO 12944-2 DIN EN ISO 12944-2ISO 12944-3 DIN EN ISO 12944-3ISO 12944-4 DIN EN ISO 12944-4ISO 12944-5 DIN EN ISO 12944-5ISO 12944-6 DIN EN ISO 12944-6ISO 12944-7 DIN EN ISO 12944-7

AmendmentsDIN 55928-3, May 1991 edition, has been superseded by the specifications of EN ISO 12944-8, which isidentical to ISO 12944-8.

Previous editionsDIN 55928: 1956-11, 1959-06x; DIN 55928-3: 1978-11, 1991-05; DIN 55928-7: 1980-02, 1991-05.

National Annex NAStandards referred to(and not included in Normative references and Annex ZA)

DIN EN 24624 Paints and varnishes – Pull-off test for adhesion (ISO 4624 : 1978)DIN EN ISO 2409 Paints and varnishes – Cross-cut test (ISO 2409 : 1992)DIN EN ISO 4623 Paints and varnishes – Filiform corrosion test on steel (ISO 4623 : 1984)DIN EN ISO 8503-1 Surface roughness characteristics of blast-cleaned steel substrates – Specifications

and definitions for ISO surface profile comparators for the assessment of abrasiveblast-cleaned surfaces (ISO 8503-1 : 1988)

DIN EN ISO 8503-2 Surface roughness characteristics of blast-cleaned steel substrates – Method for thegrading of surface profile of abrasive blast-cleaned substrates using a comparator(ISO 8503-2 : 1988)

DIN EN ISO 8503-3 Surface roughness characteristics of blast-cleaned steel substrates – Method for thecalibration of surface profile comparators and for the determination of surface profileusing a focusing microscope (ISO 8503-3 : 1988)

DIN EN ISO 8503-4 Surface roughness characteristics of blast-cleaned steel substrates – Method for thecalibration of ISO surface profile comparators and for the determination of surfaceprofile using a stylus instrument (ISO 8503-4 : 1988)

DIN EN ISO 11124-1 Specifications for metallic blast-cleaning products – Part 1: General introduction andclassification (ISO 11124-1 : 1993)

DIN EN ISO 11124-2 Specifications for metallic blast-cleaning abrasives – Part 2: Chilled-iron grit(ISO 11124-2 : 1993)

DIN EN ISO 11124-3 Specifications for metallic blast-cleaning abrasives – Part 3: High-carbon cast steel shotand grit (ISO 11124-3 : 1993)

DIN EN ISO 11124-4 Specifications for metallic blast-cleaning abrasives – Part 4: Low-carbon cast steel shot(ISO 11124-4 : 1993)

DIN EN ISO 11126-1 Specifications for non-metallic blast-cleaning products – Part 1: General introductionand classification (ISO 11126-1 : 1993, including Technical Corrigenda 1 : 1997 and2 : 1997)

DIN EN ISO 11126-3 Specifications for non-metallic blast-cleaning abrasives – Part 3: Copper refinery slag(ISO 11126-3 : 1993)

DIN EN ISO 11126-4 Specifications for non-metallic blast-cleaning abrasives – Part 4: Coal furnace slag(ISO 11126-4 : 1993)

DIN EN ISO 11126-5 Specifications for non-metallic blast-cleaning abrasives – Part 5: Nickel refinery slag(ISO 11126-5 : 1993)

DIN EN ISO 11126-6 Specifications for non-metallic blast-cleaning abrasives – Part 6: Iron furnace slag(ISO 11126-6 : 1993)

DIN EN ISO 11126-8 Specifications for non-metallic blast-cleaning abrasives – Part 8: Olivine sand(ISO 11126-8 : 1993)

DIN EN ISO 12944-1 Corrosion protection of steel structures by protective paint systems – Part 1: Generalintroduction (ISO 12944-1 : 1998)

DIN EN ISO 12944-2 Corrosion protection of steel structures by protective paint systems – Part 2: Classifi-cation of environments (ISO 12944-2 : 1998)

DIN EN ISO 12944-3 Corrosion protection of steel structures by protective paint systems – Part 3: Designconsiderations (ISO 12944-3 : 1998)

DIN EN ISO 12944-4 Corrosion protection of steel structures by protective paint systems – Part 4: Types ofsurface and surface preparation (ISO 12944-4 : 1998)

DIN EN ISO 12944-5 Corrosion protection of steel structures by protective paint systems – Part 5: Protectivepaint systems (ISO 12944-5 : 1998)

DIN EN ISO 12944-6 Corrosion protection of steel structures by protective paint systems – Part 6: Laboratoryperformance test methods (ISO 12944-6 : 1998)

DIN EN ISO 12944-7 Corrosion protection of steel structures by protective paint systems – Part 7: Executionand supervision of paint work (ISO 12944-7 : 1998)

DIN EN ISO 12944-8 : 1998-07

English version

ICS 87.020.00

Descriptors: Paint coatings, corrosion protection, structural steelwork.

Central Secretariat: rue de Stassart 36, B-1050 Brussels

European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung

Paints and varnishes

Corrosion protection of steel structures byprotective paint systems

Part 8: Development of specifications for new work and maintenance(ISO 12944-8 : 1998)

© 1998. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.

Ref. No. EN ISO 12944-8 : 1998 E

Peintures et vernis – Anticorrosiondes structures en acier par systèmesde peinture – Partie 8: Développe-ment de spécifications pour lestravaux neufs et l’entretien(ISO 12944-8 : 1998)

Beschichtungsstoffe – Korrosions-schutz von Stahlbauten durchBeschichtungssysteme –Teil 8: Erarbeiten von Spezifikationenfür Erstschutz und Instandsetzung(ISO 12944-8 : 1998)

This European Standard was approved by CEN on 1998-03-02.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Central Secretariat or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Central Secretariat has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.

ÈÉË

EN ISO 12944-8

May 1998

EN ISO 12944-8 : 1998

ForewordInternational StandardISO 12944-8 : 1998 Paints and varnishes – Corrosion protection of steel structures by protective paint sys-

tems – Part 8: Development of specifications for new work and maintenance,which was prepared by ISO/TC 35 ‘Paints and varnishes’ of the International Organization for Standardization,has been adopted by Technical Committee CEN/TC 139 ‘Paints and varnishes’, the Secretariat of which is heldby DIN, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by November 1998 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.

Endorsement noticeThe text of the International Standard ISO 12944-8 : 1998 was approved by CEN as a European Standardwithout any modification.NOTE: Normative references to international publications are listed in Annex ZA (normative).

4

4

7

8

9

19

21

24

25

26

27

32

33

34

35

38

EN ISO 12944-8 : 1998

EN ISO 12944-8allaboutmetallurgy.com/wp/wp-content/uploads/2016/12/… · · 2017-01-21DIN EN ISO...

Documents

Transcript of EN ISO 12944-8allaboutmetallurgy.com/wp/wp-content/uploads/2016/12/… · · 2017-01-21DIN EN ISO...