FB 1 SL - elektroland24 · electronic comfort 270771 26_02_02_0712 FB 1 SL Deutsch...

10
electronic comfort 270771 26_02_02_0712 FB 1 SL Deutsch Kabel-Fernbedienung für Durchlauferhitzer DHE 18 - 27 SL * Gebrauchs- und Montageanweisung English Cable remote control for Instantaneous Water Heaters DHE 18 - 27 SL * Operating and Installation Instructions DHE 18 SL, DHE 21 SL, DHE 24 SL, DHE 27 SL electronic comfort Best.-Nr. / Order No. 18 97 76, 18 97 77, 18 97 78, 18 97 79 DHE 18 SLi, DHE 21 SLi, DHE 24 SLi, DHE 27 SLi electronic comfort Best.-Nr. / Order No. 18 97 80, 18 97 81, 18 97 82, 18 97 83

Transcript of FB 1 SL - elektroland24 · electronic comfort 270771 26_02_02_0712 FB 1 SL Deutsch...

Page 1: FB 1 SL - elektroland24 · electronic comfort 270771 26_02_02_0712 FB 1 SL Deutsch Kabel-Fernbedienung für Durchlauferhitzer DHE 18 - 27 SL * Gebrauchs- und Montageanweisung

electronic comfort

2707

71

26_0

2_02

_071

2

FB 1 SLDeutsch

Kabel-Fernbedienung für Durchlauferhitzer DHE 18 - 27 SL *Gebrauchs- und MontageanweisungEnglish

Cable remote control for Instantaneous Water Heaters DHE 18 - 27 SL *Operating and Installation Instructions� DHE 18 SL, DHE 21 SL, DHE 24 SL, DHE 27 SL electronic comfort Best.-Nr. / Order No. 18 97 76, 18 97 77, 18 97 78, 18 97 79� DHE 18 SLi, DHE 21 SLi, DHE 24 SLi, DHE 27 SLi electronic comfort Best.-Nr. / Order No. 18 97 80, 18 97 81, 18 97 82, 18 97 83

Page 2: FB 1 SL - elektroland24 · electronic comfort 270771 26_02_02_0712 FB 1 SL Deutsch Kabel-Fernbedienung für Durchlauferhitzer DHE 18 - 27 SL * Gebrauchs- und Montageanweisung

2

A

2x

electronic comfort

1

C26

_02_

02_0

704

150

mm

190

mm

113

mm

43

mm

88 mm 34 mm

29 mm

43 mm

19

mm

2

3

26_0

2_02

_071

0

InhaltsverzeichnisDeutsch Seite 4 - 5

1. Gebrauchsanweisung 4 1.1 Beschreibung 1.2 Bedienung 1.3 Sicherheitshinweise 1.4 Pflege2. Montageanweisung 4 2.1 Vorschriften und Bestimmungen 2.2 Montageort 2.3 Anschlusskabel für FB 1 SL 2.4 Umbau Durchlauferhitzer 2.5 BedienteilmontageErstinbetriebnahme 5Ersatzteile 5

Table of contentsEnglish page 6 - 7

1. Operating instructions 6 1.1 Description 1.2 Operation 1.3 Safety informations 1.4 Care2. Installation instructions 6 2.1 Regulations and specifications 2.2 Installation location 2.3 Connecting cable for FB 1 SL 2.4 Converting instantaneous 2.5 Remote control installationInitial Operation 7Spare Parts 7

Page 3: FB 1 SL - elektroland24 · electronic comfort 270771 26_02_02_0712 FB 1 SL Deutsch Kabel-Fernbedienung für Durchlauferhitzer DHE 18 - 27 SL * Gebrauchs- und Montageanweisung

3

Adapter

H

electronic comfort

1

F G

C

D E

B

electronic comfort

C26

_02_

02_0

715

C26

_02_

02_0

543

C26

_02_

02_0

707

electronic comfort

4

5

8

electronic comfort

76

6

2,5 - 6 mm²

10

9

C26

_02_

02_0

688

3

C26

_02_

02_0

598_

a

12

11

26_0

2_02

_068

6

300

35

6

≥ 300 mm35 mm

6 mm

26_0

2_02

_027

6C

26_0

2_02

_070

3

Page 4: FB 1 SL - elektroland24 · electronic comfort 270771 26_02_02_0712 FB 1 SL Deutsch Kabel-Fernbedienung für Durchlauferhitzer DHE 18 - 27 SL * Gebrauchs- und Montageanweisung

4

Zur Montage der Kabel-Fernbedienung ge-hören der Wechsel des Bedienteiles vom DHE zum Wandhalter sowie der Aufbau der Datenübertragung mittels Telefonkabel und Adapterbaugruppe.

2.1 Vorschriften und Bestim-mungen• Einbau und Erstinbetriebnahme der FB 1 SL

muss von einem Fachmann unter Beachtung dieser Montageanweisung durchgeführt werden.

• Die Gebrauchs- und Montageanweisung des Durchlauferhitzers ist bei der Installation und Bedienung zu beachten.

• Alle elektrischen Anschluss- und Installa tions-arbeiten sind nach den VDE-Bestimmungen (0100), den Vorschriften des zuständigen EVU’s sowie den entsprechenden nationalen und regionalen Vorschriften auszuführen.

• Ein installiertes Gerätes ist vor dem Nach-rüsten mit einer Fernbedienung spannungs-frei zu schalten.

• Zum Schutz gegen eindringendes Wasser sind die am Gerät vorhandenen Kabelab-dichtungen einzusetzen.

• Nur bei montierter Blende (1) im Durch-lauferhitzer ist weiter hin die Schutzart IP 25 (strahlwassergeschützt) gewährleistet.

• Die länderspezifischen Vorschriften sind zu beachten.

2.2 MontageortDie Fernbedienung wird mit Hilfe des Wandhal-ters an einem gut zugänglichem Ort montiert.Die Anbringung im Schutzbereich 1 (Anforde-rung IP X4 oder IP X5) ist möglich.Montage auf einer Unterputz-Schalterdose oder Aufputz-Montage.

Die Nutzung elektrischer Geräte muss grund-sätzlich mit der gebotenen Vorsicht erfolgen, um ein potenzielles Risiko durch Feuer, elektrischen Stromschlag oder Verletzung auszuschließen. Daher ist das Gerät nur wie in dieser Anweisung beschrieben zu nutzen. Jeder Gebrauch außerhalb der Herstellerem pfehlung kann zu Schäden oder Verletzungen führen.

Vor Gebrauch des Gerätes ist die gesamte An-weisung zu lesen und die enthaltenen Hinweise zum sachgemäßen Umgang mit dem Gerät sind zu befolgen.

Diese Anweisung sorgfältig aufbewah-ren, bei Besitzerwechsel des Gerätes

dem Nachfolger aushändigen.Bei etwaigen Instandsetzungsarbeiten dem Fachmann zur Einsicht überlassen.

1. Gebrauchsanweisung für den Benutzer und den Fachmann

1.1 BeschreibungFB 1 SL ist ein Bausatz zur Installation einer Kabel-Fernbedienung für die Stiebel Eltron Durchlauf-erhitzer DHE 18 - 27 SL(i) electronic comfort.

Der „Bausatz Kabel-Fernbedienung“ enthält die notwendigen Bauteile, um das Bedienteil aus der Gerätekappe des DHE .. SL an eine externe Stelle in Küche oder Badezimmer zu verlegen. Hierzu wird das Bedienteil aus der Gerätekappe ausgebaut und in die Wandhalte-rung des Bausatzes eingesetzt.

Zur Datenübertragung zwischen Fernbedie-nung und Durchlauferhitzer wird die Adapter-baugruppe des Bausatzes in den Durchlauf-erhitzer eingebaut und über ein Kabel mit der Fernbedienung verbunden.

In die DHE-Gerätekappe wird die Blende des Bausatzes eingesetzt.

Lieferumfang FB 1 SL A :• Blende (1) für DHE-Gerätekappe• Wandhalter (2) zur Aufnahme des Bedien-

teiles vom DHE.

• Adapterbaugruppe (3)• Befestigungsmaterial zur Montage auf Unter-

putz-Schalterdose

1.2 BedienungDie Funktionen des Bedienteils ent-nehmen Sie bitte der Gebrauchs- und

Montageanweisung des Durchlauferhitzers.

1.3 Sicherheitshinweise• Es dürfen keinerlei Änderungen an der

Fernbedienung vorgenommen werden.• Ist ein Bauteil beschädigt, die Fernbedienung

heruntergefallen oder es lag bereits eine Fehlfunktion vor, ist die Fernbedienung nicht in Betrieb zu nehmen.

1.4 Pfl egeZur Pflege des Gehäuses genügt ein feuchtes Tuch. Keine scheuernden oder lösenden Reini-gungsmittel verwenden.

2. Montageanweisung für den Fachmann

2.3 Anschlusskabel für FB 1 SLDie Fernbedienung wird mit Sicherheitsklein-spannung betrieben. Eine einwandfreie Kom-munikation ist bis zu einer Anschlusslänge von 15 m gewährleistet.Steuerleitung: Telefonleitung Typ J-YY 2x2x0,6 (ohne metallische Abschirmung).Eine festverlegte Auf- oder Unterputz-Verle-gung der Steuerleitung ist zulässig.Im Schutzbereich 1 dürfen keine abgeschirmten Kabel verwendet werden.

2.4 Umbau Durchlauferhitzer– B Abdeckklappe am Durchlauferhitzer

öffnen (4), Befestigungsschraube lösen (5), Gerätekappe (6) abnehmen.

– C Stecker des Sollwertgeberkabels (7) vom Durchlauferhitzer abziehen.

– D Bedienteil (8) aus Gerätekappe (6) ent-nehmen, dazu die 4 Rasthaken drücken.

– E Blende (1) in Gerätekappe eindrücken, dabei müssen alle 4 Rasthaken einrasten.

Eine Blende mit beschädigten Rast-haken darf nicht eingebaut werden!

2.4.1 Elektrischer Anschluss am DurchlauferhitzerF Anschlusskabel wahlweise durch die freie

Kabeltülle oben (9) oder unten (10) führen.Bei Anschluss durch die obere Kabeltülle (9) ist diese am Kegel entsprechend des Kabel-querschnitts abzuschneiden.Bei Anschluss durch die untere Kabeltülle (10) ist das Kabel im Gerät unter den Kabel-halterungen am Kupferbehälter (Heizkörper) entlang nach oben zu verlegen.

Adapterbaugruppe montieren G– Anschlusskabel 35 mm abmanteln und

Kabelenden 6 mm abisolieren.

– Gehäuse der Adapterbaugruppe durch Eindrü-cken zweier seitlicher Schnapphaken öffnen.

– Anschlusskabel an Klemmleiste (11) an-schließen, in Kabeldurchführung legen und Gehäuse wieder schließen.

– H Stecker (12) auf Steckplatz „Adapter“ stecken und Adapterbaugruppe rechts oben in die Geräte rückwand einsetzen.

2.5 Montage Fernbedienung2.5.1 Bedienteilmontage– I Zweiteiligen Wandhalter (2) ausein-

ander nehmen, hierzu die unten sitzende Schraube (17) lösen.

– Buchsenklemmen-Baugruppe (13) vom Wandhalter-Unterteil abziehen.

– J Platine (14) aus Bedienteil lösen.Hierzu die Platine am unteren Steg mit dem Daumen leicht hochziehen und dabei nach-einander die drei rechten Rasthaken lösen.

– K Sollwertgeberkabel (7) an der Platine durch Buchsenklemmen-Baugruppe (13) aus dem Wandhalter ersetzen.

– Platine wieder in das Bedienteil einsetzen.Hierzu die Platine zuerst links einsetzen, dann rechts herunterdrücken.Dabei auf korrekte Positionierung der Regler achse und der Mitnehmernase des Drehknopfes achten (sonst keine korrekte Montage möglich).

– L Bedienteil in das Oberteil des Wand-halters eindrücken, alle 4 Rasthaken müssen einrasten.

2.5.2 Montage Wandhalter-Unterteil. . . bei Aufputzmontage des Anschluss-kabels– M Ausbrüche zur Kabeldurchführung (15)

unten am Wand halter ausbrechen (2 Aus-bruchstellen Wand halter-Unterteil, 1 Aus-bruchstelle Wandhalter-Oberteil).

Page 5: FB 1 SL - elektroland24 · electronic comfort 270771 26_02_02_0712 FB 1 SL Deutsch Kabel-Fernbedienung für Durchlauferhitzer DHE 18 - 27 SL * Gebrauchs- und Montageanweisung

5

PON

MLK

JI

a

26_0

2_02

_070

9

13

14

7

1315

b

b

a

c

c

16

2

17

26_0

2_02

_070

2

26_0

2_02

_070

5

C26

_02_

02_0

706

C26

_02_

02_0

708

26_0

2_02

_071

1

C26

_02_

02_0

713

C26

_02_

02_0

714

C26

_02_

02_0

716

C26

_02_

02_0

717

ErsatzteileAuszug aus der Ersatzteilliste

Erstinbetriebnahmefür den Fachmann

Der Durchlauferhitzer DHE . . SL(i) mit der Fernbedienung FB 1 SL ist

unter Berücksichtigung der Gebrauchs- und Montageanweisung des Durchlauferhit-zers in Betrieb zu nehmen: – „Montage abschließen“ – „Erstinbetriebnahme“.

Benennung Best.-Nr.Blende (1) . . . . . . . . . . . . . . . . . . . . . . .27 07 77Wandhalter (2). . . . . . . . . . . . . . . . . . .27 07 78Adapterbaugruppe (3) . . . . . . . . . . . .27 07 79

– Anschlusskabel durch die Kabeldurchfüh-rung und die Kabelabdichtung (16) führen.

– N Wandhalter mit geeigneten Befesti-gungsmaterial durch die beiden Ausbruch-stellen a befestigen.Bei Austausch gegen eine ältere Fernbedie-nung sind in dem Wandhalter entsprechende Ausbrüche b vorgesehen.

. . . bei Montage auf Unterputz-Schalter-dose– Anschlusskabel durch die Kabelabdichtung

(16) führen.– N Wandhalter durch die für Schalterdosen

passenden Ausbrüche c mit beiliegenden Schrauben befestigen.

2.5.3 Elektrischer Anschluss der Fernbedienung– Anschlusskabel 35 mm abmanteln und

Kabelenden 6 mm abisolieren.

– O Buchsenklemme auf die Stege am Wand-halter-Unterteil stecken und das Wandhalter-Oberteil in Parkposition platzieren.

– P Anschlusskabel an Buchsenklemme anklemmen, hierbei die Klemmreihenfolge (1, 2, 3, 4) in der Adapterbaugruppe beachten.

– Wandhalter-Oberteil oben am Unterteil ein-hängen, herunterklappen und festschrauben.

Aussagen zu:„Umwelt, Recycling, Kundendienst und Garantie“ siehe Gebrauchs- und Montage-anweisung des Durchlauferhitzers.

Deu

tsch

Page 6: FB 1 SL - elektroland24 · electronic comfort 270771 26_02_02_0712 FB 1 SL Deutsch Kabel-Fernbedienung für Durchlauferhitzer DHE 18 - 27 SL * Gebrauchs- und Montageanweisung

6

Installation of the cable remote control in-cludes a change of the control unit from the DHE to the wall mount and the fitting of the data transfer by telephone cable and connec-tion module.

2.1 Regulations and specifi ca-tions • The FB 1 SL connection module must be

fitted and initially started up by a qualified installer, following these installation instruc-tions.

• The operating and installation instructions for the instantaneous water heater must be observed on installation and operation.

• All electrical connections and installation work will be carried out in accordance with the VDE Rules (0100), the provisions of the electrical associations concerned and the ap-propriate national and regional regulations.

• An installed unit will be switched off before retrofitting with a remote control.

• The cable seals supplied with the unit will be fitted as protection against penetrating water.

• Protection class IP 25 (spray water pro-tected) is achieved only after the cover (1) has been installed on the heater.

• The regulations specific to the country will be observed.

2.2 Installation locationThe remote control is fitted at a clearly acces-sible spot with the aid of the wall mount. They can be fitted in protection class 1 (IP X4 or IP X5). Assembly on a concealed switchbox or surface-mounted assembly.

Electrical equipment must in principle be used with due care to eliminate any potential risk through fire, electric shock or injury. The unit should therefore be used only as described in these instructions. Use disregarding the manufacturer‘s recommendations may result in damage or injury.

The instructions should be read carefully throughout before using the appliance and the advice given on proper handling of the unit should be followed.

Keep these instructions in a safe place and give them to the new owner if you

move house. If maintenance or repair work is required, let the qualifi ed installer have them for reference.

1.1 DescriptionFB 1 SL is a module for installing a cable remote control for the Stiebel Eltron Instan-

1. Operating instructions for the user and installer

taneous Water Heater DHE 18-27 SL(i) elec-tronic comfort.

The cable remote control consists of the con-trol panel for the instantaneous water heater and the wall mount for the module. The con-trol panel is removed from the unit cover and inserted in the wall mount for the module. The remote control is installed at any desired place in the kitchen or bathroom.

The module connecting assembly built into the instantaneous water heater and linked to the remote control by a cable serves to transfer data between the remote control and heater.

The module panel is fitted into the DHE cover.

Scope of supply FB 1 SL A :• Cover (1) for the DHE unit cover• Wall mount (2) to take the DHE control unit.• Connection module (3)• Fastening material for installation on the

concealed switchbox.

1.2 OperationPlease see the operating and installa-tion instructions for the instantaneous

water heater for using the control unit.

1.3 Safety information• No changes of any kind may be made to

the remote control.• The remote control must not be used if a

component is damaged, the remote control has fallen down or it was already malfunc-tioning.

1.4 CareA damp cloth is all that is needed to care for the housing. Don‘t use abrasive or aggressive cleaning agents.

2. Installation instructions for the qualifi ed installer

2.3 Connecting cable for FB 1 SLThe remote control operates on safety extra-low voltage. Connections up to 15 m in length are ensured for easy communication.Control line: Telephone line type J-YY 2x2x0.6

(without metallic screening)The control line can be laid permanently con-cealed or surface-mounted.Screened cables may not be used under pro-tection class 1.

2.4 Converting instantaneous water heaters– B open the cover on the heater (4), loosen

the retaining screw (5). Remove the cover (6).– C pull the plug for the thermostat fly lead

cable from the heater.– D remove the control unit (8) from the

cover (6), pressing the 4 engagement hooks.– E press the panel (1) into the cover, lodg-

ing on all 4 engagement hooks.

Don‘t fi t a panel with damaged en-gagement hooks.

2.4.1 Electrical connection to the instantaneous water heaterF Feed the connecting cable optionally

through the top (9) or bottom (10) available cable grommet. When connecting through the upper cable grommet (9), it must be cut back at the bevel in line with the cable cross section.When connecting through the bottom cable grommet (10), the cable must be laid in the unit beneath the cable holders on the copper tank (heater).

Installing the connection module G – Strip the connecting cable for 35 mm and

insulate the cable ends for 6 mm.

– Open the connecting module housing by pressing in two of the catches on the side.

– Connect the connecting cable to the termi-nal strip (11), place in the cable bushing and re-close the housing.

– H insert the plug (12) into the „adapter“ point and place the connection module against the unit back wall top right.

2.5 Remote control installation2.5.1 Control unit installation– I disassemble the two-part wall mount (2),

by loosening the screws at the bottom (17).– pull the terminal strip component (13)

from the lower part of the wall mount.– J loosen the motherboard (14) from the

control unit. Do so by pulling the board upwards with the thumbs at the bottom connector, loosening the three right-hand engagement hooks one after the other at the same time.

– K replace the thermostat fly lead cable (7) on the motherboard with the terminal strip component (13) from the wall mount.

– Reinsert the motherboard in the control unit, doing so by first inserting the motherboard on the left then pressing down to the right. Check the correct positioning of the unit centre line and drive lug on the knob (cor-rect installation is not otherwise possible).

– L Press the control unit into the upper part of the wall mount. All 4 engagement hooks must nest.

2.5.2 Assembly of wall mount lower part… on surface-mounted assembly of the connecting cable– M punch out the knock-out points for

the cable bushing (15) at the bottom of the wall mount (2 wall mount lower part

Page 7: FB 1 SL - elektroland24 · electronic comfort 270771 26_02_02_0712 FB 1 SL Deutsch Kabel-Fernbedienung für Durchlauferhitzer DHE 18 - 27 SL * Gebrauchs- und Montageanweisung

7

PON

MLK

JI

a

26_0

2_02

_070

9

13

14

7

1315

b

b

a

c

c

16

2

17

26_0

2_02

_070

2

26_0

2_02

_070

5

C26

_02_

02_0

706

C26

_02_

02_0

708

26_0

2_02

_071

1

C26

_02_

02_0

713

C26

_02_

02_0

714

C26

_02_

02_0

716

C26

_02_

02_0

717

Spare Parts excerpt from the Parts List

Initial Operation for the qualifi ed installer

For starting up the instantaneous water heater DHE .. SL(i) with the

remote control FB 1 SL, please note the Instantaneous Water Heater Operating and Installation Instructions: – „Completion of installation“ – „Initial Operation“.

Nomenclature Order No.Cover Panel (1) . . . . . . . . . . . . . . . . . .27 07 77Wall mount (2). . . . . . . . . . . . . . . . . . .27 07 78Connection module (3) . . . . . . . . . . .27 07 79

knock-out points, 1 wall mount upper part knock-out point).

– Feed the connecting cable through the ca-ble bushings and cable seal (16).

– N fasten the wall mount with suitable fas-tening material through the two knock-out points a .The wall mount includes appropriate knock-out points b for replacing an older remote control.

… for assembly on concealed switchbox– feed the connecting cable through the cable

seal (16).– N fasten the wall mount with the screws

supplied through the knock-out points c appropriate to the switchboxes.

2.5.3 Remote control electrical connection – Strip the connecting cable for 35 mm and

insulate the cable ends for 6 mm.

– O insert the terminal strip on the connec-tors in the wall mount lower part and posi-tion the wall mount upper part in parking position.

– P fasten the connecting cable to the ter-minal strip, noting the sequence of terminal rows (1, 2, 3, 4) in the connection module.

– Slot the wall mount upper part into the lower part at the top, fold down and screw tight.

Information on:„Environment, recycling, after-sales service and guarantee“ see Instantaneous Water Heater Operating and Installation In-structions.

En

glis

h

Page 8: FB 1 SL - elektroland24 · electronic comfort 270771 26_02_02_0712 FB 1 SL Deutsch Kabel-Fernbedienung für Durchlauferhitzer DHE 18 - 27 SL * Gebrauchs- und Montageanweisung

8

Notizen / Note

Page 9: FB 1 SL - elektroland24 · electronic comfort 270771 26_02_02_0712 FB 1 SL Deutsch Kabel-Fernbedienung für Durchlauferhitzer DHE 18 - 27 SL * Gebrauchs- und Montageanweisung

9

Notizen / Note

Page 10: FB 1 SL - elektroland24 · electronic comfort 270771 26_02_02_0712 FB 1 SL Deutsch Kabel-Fernbedienung für Durchlauferhitzer DHE 18 - 27 SL * Gebrauchs- und Montageanweisung

CA

P 27

0771

/341

35/0

/814

7 · M

ü · I

rrtu

m u

nd t

echn

ische

Änd

erun

g vo

rbeh

alte

n! ·

Erro

rs a

nd t

echn

ical

sub

ject

to

chan

ge! ·

Sou

s ré

serv

e d‘

erre

urs

et d

e m

odifi

catio

ns t

echn

ique

s! · O

nder

voo

rbeh

oud

van

verg

issin

gen

en t

echn

ische

wijz

igin

gen!

Gedruckt auf100% Recycling-Papier.

Aktiv im Umweltschutz.8127

Stiebel Eltron Vertriebszentren

DortmundOespel (Indupark)Brennaborstr. 19 44149 DortmundTelefon 02 31/96 50 22-10E-Mail: [email protected]

Frankfurt Rudolf-Diesel-Str. 18 65760 EschbornTelefon 0 61 73/6 02-10E-Mail: [email protected]

Hamburg Georg-Heyken-Straße 4a 21147 HamburgTelefon 0 40/75 20 18-10E-Mail: [email protected]

KölnOssendorfMathias-Brüggen-Str. 132 50829 KölnTelefon 02 21/5 97 71-10E-Mail: [email protected]

LeipzigAirport Gewerbepark/GlesienIkarusstr. 10 04435 Schkeuditz-GlesienTelefon 03 42 07/7 55-10E-Mail: [email protected]

MünchenHainbuchenring 4 82061 NeuriedTelefon 0 89/89 91 56-10E-Mail: [email protected]

StuttgartWeilimdorfMotorstr. 39 70499 StuttgartTelefon 07 11/9 88 67-10E-Mail: [email protected]

Adressen und Kontakte www.stiebel-eltron.com

Unseren zentralen Service erreichen Sie unter 0 180 3...

... in der Zeit von: Montag bis Donnerstag 715 bis 1800 Uhr Freitag 715 bis 1700 Uhr

Verkauf

Telefon 0 180 3 - 70 20 10

Telefax 0 180 3 / 70 20 15

E-Mail: [email protected]

Kundendienst

Telefon 0 180 3 - 70 20 20

Telefax 0 180 3 / 70 20 25

E-Mail: [email protected]

Ersatzteil-Verkauf

Telefon 0 180 3 - 70 20 30

Telefax 0 180 3 / 70 20 35

E-Mail: [email protected]

Zentrale HolzmindenStiebel Eltron GmbH & Co. KGDr.-Stiebel-Str. 37603 HolzmindenTelefon 0 5531/702-0Fax Zentrale 05531/702-480E-Mail [email protected] www.stiebel-eltron.com

Stiebel Eltron International GmbHDr.-Stiebel-Str. 37603 HolzmindenTelefon 05531/702-0Fax 05531/702-479E-Mail [email protected] www.stiebel-eltron.com

Tochtergesellschaften und Vertriebs-zentren Europa und Übersee

BelgiqueStiebel Eltron Sprl / PvbaRue Mitoyenne 897 B-4840 Welkenraedt✆ 0 87-88 14 65 Fax 0 87-88 15 97E-Mail [email protected] www.stiebel-eltron.be

C eská republikaStiebel Eltron spol. s r.o.K Hájuo m 946 C Z-15500 Praha 5-Stodulky✆ 2-511 16111 Fax 2-355 12122E-Mail [email protected] www.stiebel-eltron.cz

FranceStiebel Eltron S.A.S.7-9, rue des SelliersB.P. 85107 F-57073 Metz-Cédex✆ 03-87-74 3888 Fax 03-87-74 6826E-Mail [email protected] www.stiebel-eltron.fr

Great BritainExclusive Distributor:Applied Energy Products Ltd.Morley Way GB-Peterborough PE2 9JJ✆ 087 09-00 04 20 Fax 017 33-31 96 10E-Mail [email protected] www.applied-energy.com

MagyarországStiebel Eltron Kft.Pacsirtamezo�u.�41 H-1036 Budapest✆ 012 50-6055 Fax 013 68-8097E-Mail [email protected] www.stiebel-eltron.hu

NederlandStiebel Eltron Nederland B.V.Daviottenweg 36Postbus 2020 NL-5202 CA‘s-Hertogenbosch✆ 073-6 23 00 00 Fax 073-6 23 11 41E-Mail [email protected] www.stiebel-eltron.nl

ÖsterreichStiebel Eltron Ges.m.b.H.Eferdinger Str. 73 A-4600 Wels✆ 072 42-47367-0 Fax 07242-47367-42E-Mail [email protected] www.stiebel-eltron.at

PolskaStiebel Eltron sp.z. o.oul. Instalatorów 9 PL-02-237 Warszawa✆ 022-8 46 48 20 Fax 022-8 46 67 03E-Mail [email protected] www.stiebel-eltron.com.pl

SverigeStiebel Eltron ABFriggagatan 5 SE-641 37 Katrineholm✆ 0150-48 7900 Fax 0150-48 7901E-Mail [email protected] www.stiebel-eltron.se

SchweizStiebel Eltron AGNetzibodenstr. 23 c CH-4133 Pratteln✆ 061-8 16 93 33 Fax 061-8 16 93 44E-Mail [email protected] www.stiebel-eltron.com

ThailandStiebel Eltron Ltd.469 Building 77, Bond StreetTambon BangpoodAmpur Pakkred Nonthaburi 11120✆ 02-960 1602-4 Fax 02-960 1605E-Mail [email protected] www.stiebeleltronasia.com

USAStiebel Eltron Inc.17 West Street West Hatfield MA 01088✆ 04 13-247-3380 Fax 0413-247-3369E-Mail [email protected] www.stiebel-eltron-usa.com

0,09 €/min (Stand: 01/06)