Fronius Power Package

84
/ Perfect Charging / Perfect Welding / Solar Energy 42,0410,2161 002-28012015 Fronius Power Package Installationsanleitung Netzgekoppelter Wechselrichter Installations instructions Grid-connected inverter DE EN

description

Modul de realizare a unui sistem centralizat format din invertoare de sir

Transcript of Fronius Power Package

  • / Perfect Charging / Perfect Welding / Solar Energy

    Fronius Power Package42,0410,2161 002-28012015Installationsanleitung

    Netzgekoppelter Wechselrichter

    Installations instructions

    Grid-connected inverter

    DE

    EN

  • 0

  • DESehr geehrter Leser

    Einleitung Wir danken Ihnen fr Ihr entgegengebrachtes Vertrauen und gratulieren Ihnen zu Ihrem technisch hochwertigen Fronius Produkt. Die vorliegende Anleitung hilft Ihnen, sich mit diesem vertraut zu machen. Indem Sie die Anleitung sorgfltig lesen, lernen Sie die viel-fltigen Mglichkeiten Ihres Fronius-Produktes kennen. Nur so knnen Sie seine Vorteile bestmglich nutzen.

    Bitte beachten Sie auch die Sicherheitsvorschriften und sorgen Sie so fr mehr Sicherheit am Einsatzort des Produktes. Sorgfltiger Umgang mit Ihrem Produkt untersttzt dessen langlebige Qualitt und Zuverlssigkeit. Das sind wesentliche Voraussetzungen fr her-vorragende Ergebnisse.

    Erklrung Sicher-heitshinweise

    Wenn Sie eines der im Kapitel Sicherheitsvorschriften abgebildeten Symbole sehen, ist erhhte Achtsamkeit erforderlich.

    GEFAHR! Bezeichnet eine unmittelbar drohende Gefahr. Wenn sie nicht gemie-den wird, sind Tod oder schwerste Verletzungen die Folge.

    WARNUNG! Bezeichnet eine mglicherweise gefhrliche Situation. Wenn sie nicht gemieden wird, knnen Tod und schwerste Verletzungen die Folge sein.

    VORSICHT! Bezeichnet eine mglicherweise schdliche Situation. Wenn sie nicht gemieden wird, knnen leichte oder geringfgige Verletzungen sowie Sach-schden die Folge sein.

    HINWEIS! Bezeichnet die Mglichkeit beeintrchtigter Arbeitsergebnisse und von Schden an der Ausrstung.

    WICHTIG! Bezeichnet Anwendungstipps und andere besonders ntzliche Informationen. Es ist kein Signalwort fr eine schdliche oder gefhrliche Situation.1

  • 2

  • DEInhaltsverzeichnis

    Sicherheitsvorschriften............................................................................................................................... 5Allgemeines ............................................................................................................................................... 8

    Verfgbare Ausfhrungen..................................................................................................................... 8Typenschlssel ..................................................................................................................................... 9

    Datenkommunikation: Anbindungsbeispiele .............................................................................................. 11Fronius Power Package, externe Datenauswertung via 3rd Party Datenlogger................................... 11Mehrere Fronius Power Packages, Fronius Sensor Box, externe Datenauswertung via Fronius Data-manager Box 2.0................................................................................................................................... 11

    Fronius Power Package, Fronius Sensor Card im Wechselrichter, Datenauswertung via Fronius Da-tamanager 2.0 im Wechselrichter ........................................................................................................ 12

    Montageempfehlung .................................................................................................................................. 13Standort-Wahl ....................................................................................................................................... 13Montageempfehlung ............................................................................................................................. 13Montageabmessungen ......................................................................................................................... 14

    Gertebeschreibung .................................................................................................................................. 16Gertebeschreibung AC Combiner auen............................................................................................ 16Gertebeschreibung AC Combiner innen ............................................................................................. 17

    Wechselrichter-Wandhalterungen und AC Combiner montieren ............................................................... 18Arbeiten mit und an den Wechselrichtern ............................................................................................. 18Wechselrichter-Wandhalterungen montieren........................................................................................ 18AC Combiner montieren ....................................................................................................................... 19

    Datenkommunikations-Kabel am AC Combiner anschlieen .................................................................... 21Allgemeines .......................................................................................................................................... 21Datenkommunikations-Kabel am AC Combiner anschlieen ............................................................... 21

    AC IN Kabel anschlieen........................................................................................................................... 23Allgemeines .......................................................................................................................................... 23Arbeiten mit und an den Wechselrichtern ............................................................................................. 23AC IN Kabel anschlieen...................................................................................................................... 23

    Weitere Ttigkeiten an den Wechselrichtern ............................................................................................. 27Arbeiten mit und an den Wechselrichtern ............................................................................................. 27Weitere Ttigkeiten an den Wechselrichtern ........................................................................................ 27

    AC berspannungs-Schutz anschlieen (Option) ..................................................................................... 28AC berspannungs-Schutz anschlieen: berspannungs-Schutz in den Wechselrichtern und im AC Combiner .............................................................................................................................................. 28

    AC berspannungs-Schutz anschlieen: berspannungs-Schutz nur im AC Combiner..................... 31AC OUT Kabel anschlieen....................................................................................................................... 32

    Allgemeines .......................................................................................................................................... 32AC OUT Kabel anschlieen.................................................................................................................. 32

    Inbetriebnahme .......................................................................................................................................... 36Voraussetzungen fr die Inbetriebnahme............................................................................................. 36Inbetriebnahme..................................................................................................................................... 36Weitere Informationen........................................................................................................................... 37

    Wartung ..................................................................................................................................................... 38Wartungsintervall .................................................................................................................................. 38Wartungsttigkeiten .............................................................................................................................. 38

    Technische Daten ...................................................................................................................................... 39Technische Daten ................................................................................................................................. 393

  • 4

  • DESicherheitsvorschriften

    Allgemeines

    Umgebungsbe-dingungen

    Das Gert ist nach dem Stand der Technik und den anerkannten sicherheit-stechnischen Regeln gefertigt. Dennoch drohen bei Fehlbedienung oder Missbrauch Gefahr fr- Leib und Leben des Bedieners oder Dritte,- das Gert und andere Sachwerte des Betreibers,- die effiziente Arbeit mit dem Gert.Alle Personen, die mit der Inbetriebnahme, Wartung und Instandhaltung des Gertes zu tun haben, mssen- entsprechend qualifiziert sein,- Kenntnisse im Umgang mit Elektroinstallationen haben und- diese Bedienungsanleitung vollstndig lesen und genau befolgen.Die Bedienungsanleitung ist stndig am Einsatzort des Gertes aufzubewah-ren. Ergnzend zur Bedienungsanleitung sind die allgemein gltigen sowie die rtlichen Regeln zu Unfallverhtung und Umweltschutz zu beachten.Alle Sicherheits- und Gefahrenhinweise am Gert - in lesbarem Zustand halten - nicht beschdigen - nicht entfernen- nicht abdecken, berkleben oder bermalen.Das Gert nur betreiben, wenn alle Schutzeinrichtungen voll funktionstchtig sind. Sind die Schutzeinrichtungen nicht voll funktionsfhig, besteht die Ge-fahr fr- Leib und Leben des Bedieners oder Dritte,- das Gert und andere Sachwerte des Betreibers- die effiziente Arbeit mit dem GertNicht voll funktionstchtige Sicherheitseinrichtungen vor dem Einschalten des Gertes von einem autorisierten Fachbetrieb instandsetzen lassen.Schutzeinrichtungen niemals umgehen oder auer Betrieb setzen.Die Positionen der Sicherheits- und Gefahrenhinweise am Gert, entnehmen Sie dem Kapitel Allgemeines der Bedienungsanleitung Ihres Gertes.Strungen, die die Sicherheit beeintrchtigen knnen, vor dem Einschalten des Gertes beseitigen.Es geht um Ihre Sicherheit!

    Betrieb oder Lagerung des Gertes auerhalb des angegebenen Bereiches gilt als nicht bestimmungsgem. Fr hieraus entstandene Schden haftet der Hersteller nicht.Genaue Informationen ber die zulssigen Umgebungsbedingungen entneh-men Sie den technischen Daten Ihrer Bedienungsanleitung.5

  • Qualifiziertes Per-sonal

    Angaben zu Ge-ruschemissions-Werten

    EMV-Manahmen

    Entsorgung

    Die Serviceinformationen in dieser Bedienungsanleitung sind nur fr qualifi-ziertes Fachpersonal bestimmt. Ein elektrischer Schlag kann tdlich sein. Fhren Sie keine anderen als die in der Dokumentation angefhrten Ttigkei-ten aus. Das gilt auch, wenn sie dafr qualifiziert sind.Smtliche Kabel und Leitungen mssen fest, unbeschdigt, isoliert und aus-reichend dimensioniert sein. Lose Verbindungen, angeschmorte, beschdigte oder unterdimensionierte Kabel und Leitungen sofort von einem autorisierten Fachbetrieb instandsetzen lassen.Wartung und Instandsetzung drfen nur durch einen autorisierten Fachbetrieb erfolgen.Bei fremdbezogenen Teilen ist nicht gewhrleistet, dass sie beanspruchungs- und sicherheitsgerecht konstruiert und gefertigt sind. Nur Original-Ersatzteile verwenden (gilt auch fr Normteile).Ohne Genehmigung des Herstellers keine Vernderungen, Ein- oder Umbau-ten am Gert vornehmen.Bauteile in nicht einwandfreiem Zustand sofort austauschen.

    Der Wechselrichter erzeugt einen maximalen Schall-Leistungspegel < 65 dB (A) (ref. 1 pW) bei Voll-Last Betrieb gem IEC 62109-1:2010.Die Khlung des Gertes erfolgt durch eine elektronische Temperaturrege-lung so geruscharm wie mglich und ist abhngig von der umgesetzten Leis-tung, der Umgebungstemperatur, der Verschmutzung des Gertes u.a.m.Ein arbeitsplatzbezogener Emissionswert kann fr dieses Gert nicht angege-ben werden, da der tatschlich auftretende Schalldruck-Pegel stark von der Montagesituation, der Netzqualitt, den umgebenden Wnden und den allge-meinen Raumeigenschaften abhngig ist.

    In besonderen Fllen knnen trotz Einhaltung der genormten Emissions- Grenzwerte Beeinflussungen fr das vorgesehene Anwendungsgebiet auftre-ten (z.B. wenn empfindliche Gerte am Aufstellungsort sind oder wenn der Aufstellungsort in der Nhe von Radio- oder Fernsehempfngern ist). In die-sem Fall ist der Betreiber verpflichtet, angemessene Manahmen fr die St-rungsbehebung zu ergreifen.

    Gem Europischer Richtlinie 2002/96/EG ber Elektro- und Elektronik-Alt-gerte und Umsetzung in nationales Recht, mssen verbrauchte Elektroger-te getrennt gesammelt und einer umweltgerechten Wiederverwertung zugefhrt werden. Stellen Sie sicher, dass Sie Ihr gebrauchtes Gert bei Ih-rem Hndler zurckgeben oder holen Sie Informationen ber ein lokales, au-torisiertes Sammel- und Entsorgungssystem ein. Ein Ignorieren dieser EU Direktive kann zu potentiellen Auswirkungen auf die Umwelt und Ihre Gesund-heit fhren!6

  • DEDatensicherheit

    Urheberrecht

    Fr die Datensicherung von nderungen gegenber den Werkseinstellungen ist der Anwender verantwortlich. Im Falle gelschter persnlicher Einstellun-gen haftet der Hersteller nicht.

    Das Urheberrecht an dieser Bedienungsanleitung verbleibt beim Hersteller.Text und Abbildungen entsprechen dem technischen Stand bei Drucklegung. nderungen vorbehalten. Der Inhalt der Bedienungsanleitung begrndet kei-nerlei Ansprche seitens des Kufers. Fr Verbesserungsvorschlge und Hin-weise auf Fehler in der Bedienungsanleitung sind wir dankbar.7

  • Allgemeines

    Verfgbare Aus-fhrungen

    Das Fronius Power Package ist in folgenden Ausfhrungen verfgbar:

    Wechselrichter:

    - AC Combiner + 3 Wechselrichter (45 - 60 kW)- AC Combiner + 4 Wechselrichter (60 - 80 kW)- AC Combiner + 5 Wechselrichter (75 - 100 kW)- AC Combiner + 6 Wechselrichter (90 - 120 kW)

    Position des AC-Auslasses:

    - AC Combiner mit AC-Auslass rechts- AC Combiner mit AC-Auslass links

    Kabel:

    - ohne Kabel- mit Datenkommunikations-Kabel, beigelegt- mit AC IN Kabel zu den Wechselrichtern, angeschlossen am AC Combiner- mit Datenkommunikations-Kabel, beigelegt und mit AC IN Kabel zu den Wechselrich-

    tern, angeschlossen am AC Combiner

    Anzahl von Datenkommunikations-Kabel und AC IN Kabel entsprechend der jeweili-gen Wechselrichter-Anzahl.

    AC berspannungs-Schutz im AC Combiner:

    - ohne berspannungs-Schutz- mit berspannungs-Schutz Typ 1+2+3, eingebaut und angeschlossen im AC Combi-

    ner, mit ausgefhrter Signalleitung fr Strmeldungen

    CEE Service-Steckdose im AC Combiner:

    - ohne CEE Service-Steckdose- mit CEE Service-Steckdose, eingebaut und angeschlossen im AC Combiner

    Anlagenberwachung Fronius Datamanager 2.0:

    - ohne Anlagenberwachung- mit Anlagenberwachung Fronius Datamanager 2.0, eingebaut und angeschlossen in

    einem Wechselrichter

    berspannungs-Schutz in den Wechselrichtern:

    - ohne berspannungs-Schutz in den Wechselrichtern- mit berspannungs-Schutz Typ 2 fr Single-MPPT, eingebaut und angeschlossen in

    jedem vorhandenen Wechselrichter- mit berspannungs-Schutz Typ 2 fr Multi-MPPT, eingebaut und angeschlossen in je-

    dem vorhandenen Wechselrichter8

  • DEDC Kabel mit DC Connector Kit oder mit MC4-Steckverbindern:

    - ohne DC Kabel- mit DC Connector Kit, jedem Wechselrichter beigelegt- mit MC4 Steckverbindern auf 3 kurzen DC-/DC+ Kabelpaaren, angeschlossen an je-

    dem Wechselrichter- mit MC4 Steckverbindern auf 4 kurzen DC-/DC+ Kabelpaaren, angeschlossen an je-

    dem Wechselrichter- mit MC4 Steckverbindern auf 5 kurzen DC-/DC+ Kabelpaaren, angeschlossen an je-

    dem Wechselrichter- mit MC4 Steckverbindern auf 6 kurzen DC-/DC+ Kabelpaaren, angeschlossen an je-

    dem Wechselrichter.

    Weitere Optionen sind mglich (z.B. Fronius Sensor Card / Box).

    Typenschlssel

    (1) Anzahl der Wechselrichter3 / 4 / 5 / 6

    (2) Hchste Eingangsleistung je Eingang in kW

    (3) Position des AC-AuslassesR = rechts / L = links

    (4) berspannungs-Schutz im AC Combiner0 = kein berspannungs-Schutz im AC CombinerT123 = berspannungs-Schutz Typ 1+2+3 im AC Combiner

    (5) AC IN Kabel0 = keine AC IN KabelAC = mit AC IN Kabel zu den Wechselrichtern, angeschlossen am AC Combiner

    (6) Datenkommunikations-Kabel0 = keine Datenkommunikations-KabelDAT = mit Datenkommunikations-Kabel

    (7) CEE Steckdose 230 V0 = ohne CEE SteckdoseSSO = mit CEE Steckdose

    (8) ausgewhlte Wechselrichter-Leistung in kW15 / 17,5 / 20

    (9) Anlagenberwachung Fronius Datamanager 2.00 = keine AnlagenberwachungDM = Anlagenberwachung Fronius Datamanager 2.0 in einem Wechselrichter

    (1) (2) (3) (4) (8) (9) (11)(6) (12)(5)

    FPP x20x-T123-AC-DAT-SSO-xk-DM-SC-T2x-x(7) (10)9

  • (10) Fronius Sensor Card0 = ohne Fronius Sensor CardSC = mit Fronius Sensor Card

    (11) berspannungs-Schutz in den Wechselrichtern0 = kein berspannungs-Schutz in den WechselrichternS = berspannungs-Schutz Typ 2 fr Single-MPPT in jedem vorhandenen Wech-selrichterM = berspannungs-Schutz Typ 2 fr Multi-MPPT in jedem vorhandenen Wech-selrichter

    (12) DC Kabel mit DC Connector Kit oder mit MC4-Steckverbindern0 = ohne DC Kabel DCC = mit DC Connector Kit, jedem Wechselrichter beigelegt 3MC4 = mit MC4 Steckverbindern auf 3 kurzen DC-/DC+ Kabelpaaren, ange-schlossen an jedem Wechselrichter4MC4 = mit MC4 Steckverbindern auf 4 kurzen DC-/DC+ Kabelpaaren, ange-schlossen an jedem Wechselrichter5MC4 = mit MC4 Steckverbindern auf 5 kurzen DC-/DC+ Kabelpaaren, ange-schlossen an jedem Wechselrichter6MC4 = mit MC4 Steckverbindern auf 6 kurzen DC-/DC+ Kabelpaaren, ange-schlossen an jedem Wechselrichter10

  • DEDatenkommunikation: Anbindungsbeispiele

    Fronius Power Package, externe Datenauswer-tung via 3rd Party Datenlogger

    Mehrere Fronius Power Packages, Fronius Sensor Box, externe Da-tenauswertung via Fronius Data-manager Box 2.0

    INININ IN IN IN

    IN OUT

    OUT OUT OUT OUT OUTOUT

    IN OUT

    123456

    INOUT

    Sensors www.

    3rd Party Datalogger

    INININ IN IN IN

    IN OUT

    OUT OUT OUT OUT OUTOUT

    IN OUT

    123456

    INININ IN IN IN

    IN OUT

    OUT OUT OUT OUT OUTOUT

    IN OUT

    123456

    INININ IN IN IN

    IN OUT

    OUT OUT OUT OUT OUTOUT

    IN OUT

    123456

    IN OUT

    Fronius Sensor Box

    IPB A

    Fronius Datamanager Box 2.0

    IN OUT

    Sensors

    www.

    LAN / WLAN11

  • Fronius Power Package, Fronius Sensor Card im Wechselrichter, Datenauswer-tung via Fronius Datamanager 2.0 im Wechselrich-ter

    INININ IN IN IN

    IN OUT

    OUT OUT OUT OUT OUTOUT

    IN OUT

    123456

    = Fronius Datamanager= Fronius Sensor Card

    WLAN

    Sensorswww.12

  • DEMontageempfehlung

    Standort-Wahl WICHTIG! Den Standort oder den Montageort so whlen, dass das Fronius Power Packa-ge keiner direkten Sonnenstrahlung ausgesetzt ist.

    Montageempfeh-lung

    Sulenmotage

    Fr die Sulenmontage des Fronius Power Package empfiehlt Fronius die Verwendung von Profilen als Quertrger, einer Kabeltasse sowie geeignetem Sulenmontage-Zubehr.

    z.B.: Sulenmontage mittels 2 Quertrgern und einer Kabeltasse fr ein Fronius Power Package mit 6 Wechsel-richtern, AC-Kabelauslass am AC Combiner rechts

    (1) Profile als Quertrger(2) Kabeltasse

    Mindestbreite innen: 145 mm(3) Ausleger fr Kabeltasse

    WICHTIG! Der Abgang fr das AC OUT Kabel muss an der gleichen Seite wie der AC-Ka-belauslass am AC Combiner sein.

    Der Installateur ist selbst fr die richtige Auswahl von Profilen, Kabeltassen und Sulen-montage-Zubehr verantwortlich.

    Wandmontage

    Fr die Wandmontage die Abstandsangaben gem Installationsanleitung bercksichti-gen.Der Installateur ist selbst fr die richtige, dem Montageuntergrund entsprechende Auswahl des Befestigungsmaterials verantwortlich.

    (1)

    (1)

    (2)

    (3)

    270 mm

    633 mm

    (3)(3)

    4300 mm13

  • Montageabmes-sungen

    Fronius Power Package mit AC Combiner rechts und AC-Auslass rechts

    Bei weniger als 6 Wechselrichtern verringert sich die Lnge der Quertrger und der Kabeltasse pro Wechsel-richter um 600 mm.

    Die Abmessungen gelten auch fr Wandmontage.

    WICHTIG! Die angegebenen Montageabmessungen mssen bei Verwendung von vorkonfektionierten Kabel unbedingt eingehalten werden!

    AC IN

    AC OUT

    4210

    3800

    304

    735915

    12201515

    18202115

    24202715

    30203315

    3915

    123456

    4300

    5

    3620

    27014

  • DEFronius Power Package mit AC Combiner links und AC-Auslass links

    Bei weniger als 6 Wechselrichtern verringert sich die Lnge der Quertrger und der Kabeltasse pro Wechsel-richter um 600 mm.

    Die Abmessungen gelten auch fr Wandmontage.

    WICHTIG! Die angegebenen Montageabmessungen mssen bei Verwendung von vorkonfektionierten Kabel unbedingt eingehalten werden!

    AC

    OU

    T

    4300

    270

    3800

    304

    5735

    9151220

    15151820

    21152420

    2715 3020

    33153620

    39154210

    AC IN1 2 3 4 5 615

  • Gertebeschreibung

    Gertebeschrei-bung AC Combi-ner auen

    AC Combiner mit AC-Kabelauslass rechts - Ansicht von unten

    AC Combiner mit AC-Kabelauslass links - Ansicht von unten

    Pos. Bezeichnung(1) metrische Verschraubung M20

    fr die Signalleitung vom AC berspannungs-Schutz (Option)(2) metrische Verschraubung M25 fr Datenkommunikations-Kabel von den Wech-

    selrichtern(3) 2 metrische Verschraubungen M20 fr Datenkommunikations-Kabel fr externen

    Anschluss(4) AC IN

    3-6 metrische Verschraubungen M40 fr AC-Kabel von den Wechselrichternmax. mglicher Kabeldurchmesser: 23 mm

    (5) AC OUTKabelauslass fr AC-Kabel zum bergabepunktzulssiger Kabeldurchmesser: min 27 mm - max. 66 mm

    (6) Druckausgleichs-Membran

    (1)

    (2)

    (3) (4) (5) (6)

    (7)

    6 5

    (8)

    4 3 2 1

    (1)

    (2)

    (3)(4)(5)(6)

    (7)

    65

    (8)

    432116

  • DEGertebeschrei-bung AC Combi-ner innen

    AC Combiner mit Kabelauslass rechts AC Combiner mit Kabelauslass links

    (7) metrische Verschraubung M20 fr das Kabel einer externen Funktionserdung

    (8) CEE Steckdose 230 V (Option)

    Lnderspezifische Adapter sind nicht im Lieferumfang des Fronius Power Package enthalten.

    Pos. Bezeichnung

    (3)(4)(5) (6)(7)(8)

    (1) (2)

    (11)

    (10)

    123456

    (a)(b)

    (9) (9) (3)(4)(5)(6)(7)(8)

    (1)(2)

    (11)

    (10)

    1 2 3 4 5 6

    (a)(b)

    Pos. Bezeichnung(1) AC berspannungs-Schutz (Option)(2) (a) (b)

    Absicherung fr CEE Steckdose (Option)FILS 16 A / 30 mAVorsicherung fr CEE Steckdose (Option)

    (3)(4)(5)(6)(7)(8)

    Sicherung fr Wechselrichter50 A

    Die Anzahl der Sicherungen hngt von der Anzahl der vorhandenen Wechselrich-ter ab (3 - max. 6).

    (9) Vorsicherung fr AC berspannungs-Schutz (Option)80 A

    (10) Anschlsse fr Datenkommunikations-Kabel zu den WechselrichternRJ45, Fronius -Solar Net

    (11) Anschlsse fr externe Datenkommunikations-KabelWechselrichter-Nummer1-617

  • Wechselrichter-Wandhalterungen und AC Combiner montieren

    Arbeiten mit und an den Wechsel-richtern

    Wechselrichter-Wandhalterun-gen montieren

    Wandhalterungen gem Installationsanleitung des Wechselrichters vom Wechsel-richter trennenWandhalterungen an den Quertrgern montieren

    (A) Vorderseite (B) Rckseite

    HINWEIS! Smtliche Ttigkeiten mit und an den Wechselrichtern mssen gene-rell gem Installationsanleitung des jeweiligen Wechselrichters erfolgen. Sicherheitshinweise und Warnhinweise in den Installationsanleitungen der Wechselrichter beachten.

    1

    2

    (A) (B)18

  • DEAC Combiner

    montierenWICHTIG! Die Kabelauslsse am AC Combiner drfen ausschlielich nach unten zeigen.

    AC Combiner an den Quertrgern montieren

    Bsp.: AC Combiner mit vorkonfektierten Kabeln

    1

    4x

    38,5 kg

    56,3 kg19

  • Bei AC Combiner mit vorkonfektionierten Kabeln:

    Kabel auslegen

    Kabel in die Kabeltasse verlegen

    Bsp.: Kabel in der Kabeltasse verlegt

    2

    320

  • DEDatenkommunikations-Kabel am AC Combiner an-schlieen

    Allgemeines Wird der AC Combiner ohne vorkonfektionierte Datenkommunikations-Kabel ausgeliefert, ist der Installateur fr Auswahl und Beschaffung der entsprechenden Kabel selbst verant-wortlich.

    Kabel-Mindestanforderung

    - min. CAT5- Kabel-Auendurchmesser 6 mm - max. 13 mm

    fr Installationen im Auenbereich:

    - Die Kabel mssen fr den Einsatz im Auenbereich geeignet sein.- Die Kabel mssen UV-bestndig sein.

    Weitere Informationen zu Datenkommunikations-Kabel:

    http://www.fronius.com/QR-link/4204101938Leitfaden fr die DATCOM-Verkabelung

    Datenkommuni-kations-Kabel am AC Combiner an-schlieen

    AC Combiner ffnenBlechabdeckungen entfernen

    metrische Verschraubungen M20 lsenDatenkommunikations-Kabel fr externen Anschluss von unten durch die metrischen Verschraubungen in den AC Combiner einfhren

    WICHTIG! Die Kabelschirme der Datenkommunikations-Kabel drfen im AC Combi-ner nicht mit Erdpotential verbunden werden!

    12

    13

    11

    12

    3

    3 34

    5

    5

    5

    5

    6

    1

    3421

  • Datenkommunikations-Kabel fr externen Anschluss gem beiliegender Montage-anleitung anschlieen

    IN OUT1 +12V +12V2 GND GND3 TX+ RX-4 RX+ TX-5 RX- TX+6 TX- RX+7 GND GND8 +12V +12V

    Hilfe zum Anschluss der Kabel finden Sie unter

    http://www.rutenbeck.de/fileadmin/user_upload/pdfs_downloadbereich/Visuel-le%20Praesentationen/Datentechnik/Praesentation_Universalmodul.pdf

    metrische Verschraubung M25 lsenDatenkommunikations-Kabel von den Wechselrichtern von unten durch die metrische Verschraubung M25 in den AC Combiner einfhrenDatenkommunikations-Kabel von den Wechselrichtern entsprechend anstecken (IN / OUT)metrische Verschraubungen fixierenM20: Anzugsmoment = 2,6 NmM25: Anzugsmoment = 4,0 Nm

    5

    67

    8

    922

  • DEAC IN Kabel anschlieen

    Allgemeines Das Anschlieen von AC-Kabel ist nur erforderlich, wenn der AC Combiner ohne vorkon-fektionierte Kabel ausgeliefert wird.Der Installateur ist fr Auswahl und Beschaffung der entsprechenden Kabel selbst verant-wortlich.

    Kabel-Mindestanforderung

    Arbeiten mit und an den Wechsel-richtern

    AC IN Kabel an-schlieen

    AC IN Kabel vom AC Combiner zum nchstgelegenen Wechselrichter verlegen

    1 - Sicherung herausschwenken- Sicherung entfernen

    AC IN Kabel AC OUT KabelL1 / L2 / L3 / N / PEAuendurchmesser: max. 23 mm

    L1 / L2 / L3 / PEoderL1 / L2 / L3 / N / PEAuendurchmesser:min. 27 mm - max. 66 mm

    HINWEIS! Smtliche Ttigkeiten mit und an den Wechselrichtern mssen gene-rell gem Installationsanleitung des jeweiligen Wechselrichters erfolgen. Sicherheitshinweise und Warnhinweise in den Installationsanleitungen der Wechselrichter beachten.

    1

    1223

  • 2 - Kunststoffbgel nach oben klappen

    3 - metrische Verschraubung M40 auf der Unterseite des AC Combiner lsen

    - AC IN Kabel von unten durch die met-rische Verschraubung in den AC Com-biner einfhren

    - Zugentlastungsschelle an der Schiene einhngen

    - AC IN Kabel mittels Zugentlastungs-schelle fixierenKreuz-SchraubendreherAnzugsmoment = 1,5 Nm

    WICHTIG! - Beim Anschluss der einzelnen Leiter entsprechende Ader-Endhlsen verwenden!- Kabellngen so bemessen, dass keine Schlaufen gebildet werden.

    1 - Schutzleiter PE an der unteren, mit PE gekennzeichneten Kupfer-Schiene an-schlieenTorx-Schraubendreher TX25Anzugsmoment = 3,0 Nm

    1

    3

    32

    14 7

    5 86 9

    4

    2

    1

    524

  • DE2 - Neutralleiter N an der oberen, mit N gekennzeichneten Kupfer-Schiene an-schlieenTorx-Schraubendreher TX25Anzugsmoment = 3,0 Nm

    3 - Die Leiter L1, L2 und L3 am Siche-rungshalter anschlieenTorx-Schraubendreher TX25Anzugsmoment = 12,0 Nm

    4 - Kunststoffbgel nach unten klappen und einrasten

    2

    1

    6

    4

    1

    2

    3

    3x

    TX25

    7

    1

    825

  • 5 - metrische Verschraubung M40 fixierenAnzugsmoment = 14,0 Nm

    AC IN Kabel gem Installationsanleitung des Wechselrichter am Wechselrichter an-schlieenDen Arbeitsablauf fr alle Wechselrichter wiederholen

    1

    9

    10

    1126

  • DEWeitere Ttigkeiten an den Wechselrichtern

    Arbeiten mit und an den Wechsel-richtern

    Weitere Ttigkei-ten an den Wech-selrichtern

    DC Kabel gem Installationsanleitungen der Wechselrichter an den Wechselrichtern anschlieen

    WICHTIG! Beim Einhngen der Leistungsteile auf eventuelle Kabel eines berspan-nungs-Schutzes im Wechselrichter achten.Kabel gem Installationsanleitungen der Wechselrichter verlegen. Kabel nicht einklem-men.

    Leistungsteile einhngen und mittels Schrauben an den Wandhalterungen fixierenWechselrichter und AC Combiner mittels Datenkommunikations-Kabel miteinander verbinden

    Falls erforderlich, weitere DATCOM-Komponenten installieren und anschlieen (z.B. Fronius Sensor Card)Falls im AC Combiner und in den Wechselrichtern kein berspannungs-Schutz ein-gebaut ist:DATCOM-Abdeckung an den Wechselrichtern montieren

    Falls im AC Combiner und / oder in den Wechselrichtern ein berspannungs-Schutz ein-gebaut ist, diesen gem folgendem Abschnitt anschlieen.

    HINWEIS! Smtliche Ttigkeiten mit und an den Wechselrichtern mssen gene-rell gem Installationsanleitung des jeweiligen Wechselrichters erfolgen. Sicherheitshinweise und Warnhinweise in den Installationsanleitungen der Wechselrichter beachten.

    1

    23

    INININ IN IN IN

    IN OUT

    OUT OUT OUT OUT OUTOUT

    IN OUT

    123456

    INOUT

    Sensors www.

    3rd Party Datalogger

    4

    527

  • AC berspannungs-Schutz anschlieen (Option)

    AC berspan-nungs-Schutz an-schlieen: berspannungs-Schutz in den Wechselrichtern und im AC Com-biner

    Bei allen Wechselrichtern auer dem Wechselrichter, der direkt neben dem AC Com-biner positioniert ist:Kabel vom berspannungsschutz an der schaltbaren Multifunktions-Stromschnittstel-le anstecken (siehe Installationsanleitung, Option DC OVP Typ 2)

    Am Wechselrichter direkt neben dem AC Combiner das aus dem AC Combiner kom-mende Kabel (1) wie folgt anstecken:

    bersicht(1) 2-poliges Kabel vom AC berspannungs-Schutz des AC Combiner, inkl.

    Klemme, ein Einzelkabel angeschlossen(2) 2-poliges Kabel vom berspannungs-Schutz des Wechselrichters, inkl. Ge-

    genstecker fr die Multifunktions-Stromschnittstelle des Wechselrichters(3) Einzelkabel vom berspannungs-Schutz des Wechselrichters(4) Freies Einzelkabel vom AC berspannungs-Schutz des AC Combiner

    Kabel (1) durch die metrische Verschraubung in den Datenkommunikations-Bereich des Wechselrichters einfhren

    1

    2

    1

    (1)

    (2)(3)

    (4)

    2a

    (1)

    1(2)

    (1)28

  • DEEin Einzelkabel (3) vom Stecker des berspannungsschutz-Kabels (2) abschlieen

    Einzelkabel (3) am Stecker von Kabel (1) anstecken;Stecker von Kabel (1) verriegeln

    2b

    (1)

    2

    1

    (3)(2)

    2c

    1

    2

    (2)

    (1)

    (3)29

  • DATCOM-Abdeckung am Wechselrichter montieren

    Freies Einzelkabel (4) von Kabel (1) am freien Steckplatz des Steckers von Kabel (2) anschlieen

    Kabel (2) an der schaltbaren Multifunktions-Stromschnittstelle des Wechselrichters anstecken

    2d

    (2)

    (1)

    1

    (4)

    2e

    1

    (1)

    (2)

    330

  • DEAC berspan-

    nungs-Schutz an-schlieen: berspannungs-Schutz nur im AC Combiner

    Am Wechselrichter direkt neben dem AC Combiner das aus dem AC Combiner kom-mende Kabel (1) wie folgt anstecken:

    DATCOM-Abdeckung am Wechselrichter montieren

    bersicht(1) 2-poliges Kabel vom AC berspannungs-Schutz des AC Combiner, inkl.

    Klemme, ein Einzelkabel angeschlossen(2) Gegenstecker fr die Multifunktions-Stromschnittstelle des Wechselrichters

    Kabel (1) durch die metrische Verschraubung in den Datenkommunikations-Bereich des Wechselrichters einfhren

    Gegenstecker (2) vom Wechselrichter abstecken

    Klemme von Kabel (1) abschlieen

    Kabel (1) am Gegenstecker (2) anschlieen

    Kabel (1) mit Gegenstecker (2) an der Multifunktions-Stromschnittstelle des Wech-selrichters anstecken

    1

    1

    (1)

    (2)

    1a

    1b

    1c

    1d

    1e

    231

  • AC OUT Kabel anschlieen

    Allgemeines Der Installateur ist fr Auswahl und Beschaffung eines entsprechenden Kabels sowie ge-eigneter Kabelschuhe selbst verantwortlich.Der Anschluss von Aluminium-Kabeln ist zulssig.

    AC OUT Kabel an-schlieen

    1 - Berhrschutz entfernen2 x TX25

    - 5 Sechskant-Schrauben von den Kup-fer-Schienen entfernenSW 19 mm

    2 - Auf der Unterseite am AC OUT Kabe-lauslass eine dem verwendeten Kabel-Auendurchmesser entsprechende ffnung ausschneiden

    2

    1

    3

    4

    6

    5

    7

    9

    8

    10

    1

    1

    2

    28 m

    m37

    mm

    45 m

    m52

    mm

    62 m

    m67

    mm32

  • DE1 - AC OUT Kabel ca. 400 mm abisolieren - AC OUT Kabel von unten durch den

    Kabelauslass in den AC Combiner ein-fhren

    2 - AC OUT Kabelauslass fixieren

    1

    3

    1

    4

    1 - Einzelkabel an den Anschlssen aus-richten

    - Einzelkabel unter Bercksichtigung der zu verwendenden Kabelschuhe entsprechend ablngen

    5

    L1

    L2

    L3

    N

    PE33

  • 1Kabelschuhe sind nicht im Lieferumfang des Fronius Power Package enthalten und mssen je nach verwendeter Kabeltype vom Installateur ausgewhlt werden.

    - M12 Kabelschuh am Schutzleiter PE anbringen

    - Kabelschuh nach Bedarf mit passen-dem Schrumpfschlauch versehen(in der Abbildung nicht dargestellt)

    2 - Schutzleiter PE an der unteren Kupfer-Schiene anschlieen

    - M12 Kabelschuhe an den restlichen Leitern anbringen

    - Kabelschuhe nach Bedarf mit passen-den Schrumpfschluchen versehen(in der Abbildung nicht dargestellt)

    WICHTIG! Beim Anschluss des Leiters L1 darauf achten, dass das Distanz-stck zwischen Kupfer-Schiene und Kabelschuh ist.

    - Die restlichen Leiter an den Kupfer-Schienen anschlieen

    Anzugsmoment = 70 Nm

    3

    WICHTIG! Nur bei Verwendung eines 5-po-ligen AC OUT Kabels:

    - Kupfer-Bgel zwischen den Kupfer-Schienen entfernenSW 19 mm

    Bei angeschlossener Erdung darf kein PEN-Bgel im AC Combiner vorhanden sein!Bei Verwendung eines 4-poligen AC OUT Kabels (z.B. fr ein TNC-Netz) verbleibt der Kupfer-Bgel im AC Combiner.

    1

    6

    13

    2

    4

    6

    10

    8

    9

    5

    7

    7

    3

    12

    4

    834

  • DE4 - Berhrschutz montieren2 x TX25

    5 - Abdeckungen montieren

    Fr das AC OUT Kabel eine externe Zugentlastung vorsehen

    4

    3

    1

    2

    9

    1

    3

    3

    5

    3

    6

    4

    1

    2

    5

    5

    7

    77

    75

    5

    2

    22

    10

    1135

  • Inbetriebnahme

    Voraussetzun-gen fr die Inbe-triebnahme

    - Die AC IN Kabel mssen an den Wechselrichtern und im AC-Verteiler angeschlossen sein.

    - Die Wechselrichter mssen DC-seitig angeschlossen sein.- Das AC OUT Kabel muss im AC Combiner und am ffentlichen Stromnetz ange-

    schlossen sein.- Ein vorhandener berspannungs-Schutz muss am Wechselrichter angeschlossen

    sein.- Smtliche Berhrschutz-Vorrichtungen und Abdeckungen mssen sowohl an den

    Wechselrichtern als auch am AC Combiner montiert sein.

    Inbetriebnahme Die Inbetriebnahme der Wechselrichter darf ausschlielich gem Installationsanleitung und Bedienungsanleitung der Wechselrichter erfolgen.

    AC-seitige Isolationsmessung am AC Combiner durchfhrenAC-Spannungsversorgung herstellenDrehfeld berprfen

    6 - Sicherungen einsetzen- Sicherungen einschwenken

    AC Combiner schlieenWechselrichter einschaltenGewnschte Sprache am Wechselrichter einstellenLnder-Setup einstellenZeit und Datum einstellenMPP Tracker 2 einstellenFalls ein berspannungs-Schutz vorhanden ist:Einstellungen fr den berspannungs-Schutz ausfhren BASIC-Men / Signal Eingang / Ext. Sig. / Auslseart: Warning / Anschluss Type: N/CIm Setup-Men unter DATCOM die Wechselrichter-Nummer einstellenFalls eine Anlagenberwachung via Fronius Datamanager 2.0 vorhanden ist:den Inbetriebnahme-Assistenten ausfhren

    123

    1

    4

    567891011

    121336

  • DEWeitere Informati-

    onenWeitere Informationen zu den Wechselrichter oder zur Anlagenberwachung finden Sie in folgenden Dokumenten:

    Bezeichnung DE EN

    Installationsanleitung Fronius Symo 10 - 20 kW

    http://www.fronius.com/QR-link/4204260175DEhttp://www.fronius.com/QR-link/4204260175EN

    Bedienungsanleitung Fronius Symo

    http://www.fronius.com/QR-link/4204101909(DE, FR, NL)http://www.fronius.com/QR-link/42042102028(EN, IT, PT-BR)

    Bedienungsanleitung Fronius Datamanager 2.0

    http://www.fronius.com/QR-link/4204260191DEhttp://www.fronius.com/QR-link/4204260191EA37

  • Wartung

    Wartungsintervall Abhngig von den Einsatz- und Umgebungsbedingungen muss die Wartung regelmig, mindestens einmal jhrlich durchgefhrt und entsprechend dokumentiert werden.

    Wartungsttigkei-ten

    1. Die Scharniere der Tren auf Leichtgngigkeit berprfen und mit einemgeeigneten, wasserfreien Schmiermittel einsprhen.

    2. Das Schloss auf Leichtgngigkeit berprfen. Alle beweglichen Verschlussteilemit ei-nem geeigneten, wasserfreien Schmiermittel eingesprhen.

    3. Dichtungen im Andruckkanten-Bereich bei Beschdigung komplett ersetzen.

    4. Um Beschdigungen durch temperaturbedingtes Anfrieren der Dichtungen zu verhin-dern, knnen bliche Mittel wie Talkum, Vaseline oder Wachse eingesetzt werden.Alle Komponenten und Oberflchen auf uere Beschdigungen untersuchen.

    5. Eventuelle Beschdigungen an der Beschichtung wie folgt reparieren: Kleinflchige Schden, die nur einen Teil der Oberflche betreffen (z. B. Kratzer):

    Oberflche an der beschdigten Stelle leicht anschleifen und alle Korrosionsspu-ren sowie alle Verschmutzungen entfernen. Je nach Gre der Beschdigung entweder mit einem Lackstift, einem Pinsel oder mit der Lack-Spraydose Ausbesserungslack aufbringen (2K-PUR Acryllack)

    Groflchige Schden:Oberflche gleichmig abreiben und mit Testbenzin reinigen; anschlieendge-samte Flche mit Ausbesserungslack berlackieren (2K-PUR Acryllack).38

  • DETechnische Daten

    Technische Daten

    1) Option2) vorkonfektionierte Kabel

    Bemessungsstrom 200 ABemessungs-Kurzschlussstrom 38 kA (bei Vorsicherung 250 A gG)Umgebungstemperatur-Bereich -25 - +45 CNetztopologie TN (universell: TN-C, TN-S und TT Netze)AC berspannungsschutz 1) Typ 1+2+3 inkl. Vorsicherung 80 AAC-Eingang/Ausgang 3PN 400 / 230VFrequenz 50 Hz / 60 HzAC-Eingnge 3 - 6 x max. 20 kVA / Eingang,

    gesichert 3P 50A NH000Max. Ausgangsleistung 120 kVAAbmessungen (Hhe x Breite x Tiefe) 750 x 700 x 300 mmGewicht (ohne Kabel) 38,5 kgGehuse Freiluftwandgehuse

    ALU 99,5HH pulverbeschichtetSchutzart IP 54AC-Verbindung 1) 2) H07RN-F 5G10mmDatenkommunikation-Verbindung 1) 2) Patchkabel, 2m, geschirmt, RJ45,

    UV-bestndigServicesteckdose 1) 1PN 230V/16A/30mA, CEENormenerfllung EN 61439-239

  • 40

  • ENDear reader,

    Introduction Thank you for the trust you have placed in our company and congratulations on buying this high-quality Fronius product. These instructions will help you familiarise yourself with the product. Reading the instructions carefully will enable you to learn about the many different features it has to offer. This will allow you to make full use of its advantages.

    Please also note the safety rules to ensure greater safety when using the product. Careful handling of the product will repay you with years of safe and reliable operation. These are essential prerequisites for excellent results.

    Explanation of safety symbols

    If you see any of the symbols depicted in the "Safety rules" chapter, special care is re-quired.

    DANGER! Indicates immediate and real danger. If it is not avoided, death or se-rious injury will result.

    WARNING! Indicates a potentially dangerous situation. Death or serious injury may result if appropriate precautions are not taken.

    CAUTION! Indicates a situation where damage or injury could occur. If it is not avoided, minor injury and/or damage to property may result.

    NOTE! Indicates a risk of flawed results and possible damage to the equipment.

    IMPORTANT! Indicates tips for correct operation and other particularly useful information. It does not indicate a potentially damaging or dangerous situation.41

  • 42

  • ENContents

    Safety rules ................................................................................................................................................ 45General ...................................................................................................................................................... 48

    Available designs .................................................................................................................................. 48Type key ............................................................................................................................................... 49

    Data communication: Connection examples.............................................................................................. 51Fronius Power Package, external data evaluation via third-party datalogger....................................... 51Multiple Fronius Power Packages, Fronius Sensor Box, external data evaluation via Fronius Datama-nager Box 2.0........................................................................................................................................ 51

    Fronius Power Package, Fronius Sensor Card in the inverter, data evaluation via Fronius Dataman-ager 2.0 in the inverter ......................................................................................................................... 52

    Installation recommendation ...................................................................................................................... 53Choice of location ................................................................................................................................. 53Installation recommendation ................................................................................................................. 53Installation dimensions.......................................................................................................................... 54

    Description of the device............................................................................................................................ 56Description of the device, AC Combiner external ................................................................................. 56Description of the device, AC Combiner internal .................................................................................. 57

    Fitting inverter wall brackets and AC Combiners ....................................................................................... 58Working with and on the inverters......................................................................................................... 58Fitting inverter wall brackets ................................................................................................................. 58AC Combiner - fitting............................................................................................................................. 59

    Connecting the data communication cable to the AC Combiner ............................................................... 61General ................................................................................................................................................. 61Connecting the data communication cables to the AC Combiner Open the......................................... 61

    Connecting AC IN cables........................................................................................................................... 63General ................................................................................................................................................. 63Working with and on the inverters......................................................................................................... 63Connecting AC IN cables...................................................................................................................... 63

    Other work on the inverters........................................................................................................................ 67Working with and on the inverters......................................................................................................... 67Other work on the inverters................................................................................................................... 67

    Connecting the AC overvoltage protection (optional) ................................................................................ 68Connecting the AC overvoltage protection: Overvoltage protection in the inverters and in the AC Com-biner ...................................................................................................................................................... 68

    Connecting the AC overvoltage protection: Overvoltage protection only in the AC Combiner ............. 71Connecting AC OUT cables....................................................................................................................... 72

    General ................................................................................................................................................. 72Connecting AC OUT cables.................................................................................................................. 72

    Start-up ...................................................................................................................................................... 76Prerequisites for commissioning ........................................................................................................... 76Commissioning ..................................................................................................................................... 76Further information................................................................................................................................ 77

    Maintenance .............................................................................................................................................. 78Maintenance interval............................................................................................................................. 78Maintenance activities........................................................................................................................... 78

    Technical data............................................................................................................................................ 79Technical data....................................................................................................................................... 7943

  • 44

  • ENSafety rules

    General

    Environmental conditions

    The device is manufactured using state-of-the-art technology and according to recognised safety standards. If used incorrectly or misused, however, it can cause:- injury or death to the operator or a third party,- damage to the device and other material assets belonging to the operat-

    ing company,- inefficient operation of the device.All persons involved in commissioning, maintaining and servicing the device must- be suitably qualified,- have knowledge of and experience in dealing with electrical installations

    and- read and follow these operating instructions carefully.The operating instructions must always be at hand wherever the device is be-ing used. In addition to the operating instructions, attention must also be paid to any generally applicable and local regulations regarding accident preven-tion and environmental protection.All safety and danger notices on the device - must be in a legible state, - must not be damaged, - must not be removed,- must not be covered, pasted or painted over.Only operate the device when all protection devices are fully functional. If the protection devices are not fully functional, there is a risk of- injury or death to the operator or a third party,- damage to the device and other material assets belonging to the operator,- inefficient operation of the device.Any safety devices that are not functioning properly must be repaired by a suit-ably qualified engineer before the device is switched on.Never bypass or disable protection devices.For the location of the safety and danger notices on the device, refer to the section headed "General remarks" in the operating instructions for the device.Before switching on the device, remove any faults that could compromise safety.This is for your personal safety!

    Operation or storage of the device outside the stipulated area will be deemed as "not in accordance with the intended purpose". The manufacturer shall not be held liable for any damage arising from such usage.For exact information on permitted environmental conditions, please refer to the "Technical data" in the operating instructions.45

  • Qualified service engineers

    Noise emission values

    EMC measures

    Disposal

    Data protection

    The servicing information contained in these operating instructions is intended only for the use of qualified service engineers. An electric shock can be fatal. Do not perform any actions other than those described in the documentation. This applies even if you are qualified to do so.All cables and leads must be secure, undamaged, insulated and adequately dimensioned. Loose connections, scorched, damaged or inadequately dimen-sioned cables and leads must be immediately repaired by authorised person-nel.Maintenance and repair work must only be carried out by authorised person-nel.It is impossible to guarantee that bought-in parts are designed and manufac-tured to meet the demands made of them, or that they satisfy safety require-ments. Use only original spare parts (also applies to standard parts).Do not carry out any modifications, alterations, etc. to the device without the manufacturer's consent.Components that are not in perfect condition must be changed immediately.

    The inverter generates a maximum sound power level of < 65 dB(A) (ref. 1 pW) when operating under full load in accordance with IEC 62109-1:2010.The device is cooled as quietly as possible with the aid of an electronic tem-perature control system, and depends on the amount of converted power, the ambient temperature, the level of soiling of the device, etc.It is not possible to provide a workplace-related emission value for this device because the actual sound pressure level is heavily influenced by the installa-tion situation, the power quality, the surrounding walls and the properties of the room in general.

    In certain cases, even though a device complies with the standard limit values for emissions, it may affect the application area for which it was designed (e.g. when there is sensitive equipment at the same location, or if the site where the device is installed is close to either radio or television receivers). If this is the case, then the operator is obliged to take appropriate action to rectify the situ-ation.

    To comply with the European Directive 2002/96/EC on Waste Electrical and Electronic Equipment and its implementation as national law, electrical equip-ment that has reached the end of its life must be collected separately and re-turned to an approved recycling facility. Any device that you no longer require must either be returned to your dealer or given to one of the approved collec-tion and recycling facilities in your area. Ignoring this European Directive may have potentially adverse affects on the environment and your health!

    The user is responsible for the safekeeping of any changes made to the fac-tory settings. The manufacturer accepts no liability for any deleted personal settings.46

  • ENCopyright Copyright of these operating instructions remains with the manufacturer.The text and illustrations are all technically correct at the time of printing. We reserve the right to make changes. The contents of the operating instructions shall not provide the basis for any claims whatsoever on the part of the pur-chaser. If you have any suggestions for improvement, or can point out any mistakes that you have found in the instructions, we will be most grateful for your comments.47

  • General

    Available designs The Fronius Power Package is available in the following designs:

    Inverters:

    - AC Combiner + 3 inverters (45 - 60 kW)- AC Combiner + 4 inverters (60 - 80 kW)- AC Combiner + 5 inverters (75 - 100 kW)- AC Combiner + 6 inverters (90 - 120 kW)

    Position of the AC outlet:

    - AC Combiner with AC outlet on right- AC Combiner with AC outlet on left

    Cables:

    - without cables- with data communication cables, included- with AC IN cables to the inverters, connected to the AC Combiner- with data communication cables, included, and with AC IN cables to the inverters, con-

    nected to the AC Combiner

    Number of data communication cables and AC IN cables in line with the number of inverters in each case.

    AC overvoltage protection in the AC Combiner:

    - without overvoltage protection- with overvoltage protection type 1+2+3, built in and connected in the AC Combiner;

    with integrated signal line for error messages

    CEE service socket in the AC Combiner:

    - without CEE service socket- with CEE service socket, built in and connected in the AC Combiner

    Fronius Datamanager 2.0 system monitoring:

    - without system monitoring- with Fronius Datamanager 2.0 system monitoring, built in and connected in an inverter

    Overvoltage protection in the inverters:

    - without overvoltage protection in the inverters- with type 2 overvoltage protection for single MPTT, built in and connected in each in-

    verter present- with type 2 overvoltage protection for multi MPTT, built in and connected in each in-

    verter present48

  • ENDC cable with DC connector kit or with MC4 connectors:

    - without DC cable- with DC connector kit, included with each inverter- with MC4 connectors on 3 short DC-/DC+ cable pairs, connected to each inverter- with MC4 connectors on 4 short DC-/DC+ cable pairs, connected to each inverter- with MC4 connectors on 5 short DC-/DC+ cable pairs, connected to each inverter- with MC4 connectors on 6 short DC-/DC+ cable pairs, connected to each inverter

    Other options are possible (e.g. Fronius Sensor Card / Box).

    Type key

    (1) Number of inverters3 / 4 / 5 / 6

    (2) Highest input power per input in kW

    (3) Position of AC outletR = right / L = left

    (4) Overvoltage protection in the AC Combiner0 = no overvoltage protection in the AC CombinerT123 = Type 1+2+3 overvoltage protection in the AC Combiner

    (5) AC IN cables0 = no AC IN cablesAC = with AC IN cables to the inverters, connected to the AC Combiner

    (6) Data communication cables0 = no data communication cablesDAT = with data communication cables

    (7) CEE 230 V socket0 = no CEE socketSSO = with CEE socket

    (8) selected inverter power in kW15 / 17.5 / 20

    (9) Fronius Datamanager 2.0 system monitoring0 = no system monitoringDM = Fronius Datamanager 2.0 system monitoring in one inverter

    (10) Fronius Sensor Card0 = no Fronius Sensor CardSC = with Fronius Sensor Card

    (1) (2) (3) (4) (8) (9) (11)(6) (12)(5)

    FPP x20x-T123-AC-DAT-SSO-xk-DM-SC-T2x-x(7) (10)49

  • (11) Overvoltage protection in the inverters0 = no overvoltage protection in the invertersS = type 2 overvoltage protection for single MPPT in each inverter presentM = type 2 overvoltage protection for multi MPPT in each inverter present

    (12) DC cables with DC connector kit or with MC4 connectors0 = without DC cables DC CT = with DC connector kit, included with each inverter 3MC4 = with MC4 connectors on 3 short DC-/DC+ cable pairs, connected to each inverter4MC4 = with MC4 connectors on 4 short DC-/DC+ cable pairs, connected to each inverter5MC4 = with MC4 connectors on 5 short DC-/DC+ cable pairs, connected to each inverter6MC4 = with MC4 connectors on 6 short DC-/DC+ cable pairs, connected to each inverter50

  • ENData communication: Connection examples

    Fronius Power Package, external data evaluation via third-party da-talogger

    Multiple Fronius Power Packages, Fronius Sensor Box, external data evaluation via Fronius Dataman-ager Box 2.0

    INININ IN IN IN

    IN OUT

    OUT OUT OUT OUT OUTOUT

    IN OUT

    123456

    INOUT

    Sensors www.

    3rd Party Datalogger

    INININ IN IN IN

    IN OUT

    OUT OUT OUT OUT OUTOUT

    IN OUT

    123456

    INININ IN IN IN

    IN OUT

    OUT OUT OUT OUT OUTOUT

    IN OUT

    123456

    INININ IN IN IN

    IN OUT

    OUT OUT OUT OUT OUTOUT

    IN OUT

    123456

    IN OUT

    Fronius Sensor Box

    IPB A

    Fronius Datamanager Box 2.0

    IN OUT

    Sensors

    www.

    LAN / WLAN51

  • Fronius Power Package, Fronius Sensor Card in the inverter, data evaluation via Fronius Dataman-ager 2.0 in the in-verter INININ IN IN IN

    IN OUT

    OUT OUT OUT OUT OUTOUT

    IN OUT

    123456

    = Fronius Datamanager= Fronius Sensor Card

    WLAN

    Sensorswww.52

  • ENInstallation recommendation

    Choice of loca-tion

    IMPORTANT! Select the site or the installation location so that the Fronius Power Package is not exposed to direct sunlight.

    Installation rec-ommendation

    Mounting on a pillar

    When mounting the Fronius Power Package on a pillar, Fronius recommends using pro-files as crossmembers, a cable tray and suitable accessories for fitting to the pillar.

    e.g.: Mounting on a pillar using two crossmembers and one cable tray for a Fronius Power Package with six in-verters, AC cable outlet at the AC Combiner right

    (1) Profiles as crossmembers(2) Cable tray

    Minimum internal width: 145 mm(3) Boom for cable tray

    IMPORTANT! The port for the AC OUT cable must be on the same side as the AC cable outlet on the AC Combiner .

    The installer is personally responsible for selecting the correct profiles, cable trays and pil-lar-mounting accessories.

    Wall mounting

    For wall mounting, note the spacing information provided in the installation instructions.The installer is personally responsible for selecting the correct fixings that are appropriate for the installation surface.

    (1)

    (1)

    (2)

    (3)

    270 mm

    633 mm

    (3)(3)

    4300 mm53

  • Installation di-mensions

    Fronius Power Package with AC Combiner on right and AC outlet on right

    Where there are fewer than six inverters, the length of the crossmembers and the cable tray is reduced by 600 mm per inverter.

    The dimensions are also applicable for wall mounting.

    IMPORTANT! It is vital that the specified installation dimensions are complied with when using prefabricated cables.

    AC IN

    AC OUT

    4210

    3800

    304

    735915

    12201515

    18202115

    24202715

    30203315

    3915

    123456

    4300

    5

    3620

    27054

  • ENFronius Power Package with AC Combiner on left and AC outlet on left

    Where there are fewer than six inverters, the length of the crossmembers and the cable tray is reduced by 600 mm per inverter.

    The dimensions are also applicable for wall mounting.

    IMPORTANT! It is vital that the specified installation dimensions are complied with when using prefabricated cables.

    AC

    OU

    T

    4300

    270

    3800

    304

    5735

    9151220

    15151820

    21152420

    2715 3020

    33153620

    39154210

    AC IN1 2 3 4 5 655

  • Description of the device

    Description of the device, AC Com-biner external

    ACCombiner with AC cable outlet on right - view from below

    AC Combiner with AC cable outlet on left - view from below

    Item Designation(1) M20 metric screw joint

    for the signal line from the AC overvoltage protection (optional)(2) M25 metric screw joint for the data communication cable from the inverters(3) Two M20 metric screw joints for data communication cables for external connec-

    tion(4) AC IN

    3-6 M40 metric screw joints for AC cables from the invertersmax. possible cable diameter: 23 mm

    (5) AC OUTCable outlet for AC cable to the transfer pointpermitted cable diameter: min 27 mm - max. 66 mm

    (6) Pressure compensation membrane

    (1)

    (2)

    (3) (4) (5) (6)

    (7)

    6 5

    (8)

    4 3 2 1

    (1)

    (2)

    (3)(4)(5)(6)

    (7)

    65

    (8)

    432156

  • ENDescription of the device, AC Com-biner internal

    AC Combiner with cable outlet on right AC Combiner with cable outlet on left

    (7) M20 metric screw joint for the cable from an external functional earthing

    (8) CEE 230 V socket (optional)

    Country-specific adapters are not included in the scope of supply for the Fronius Power Package.

    Item Designation

    (3)(4)(5) (6)(7)(8)

    (1) (2)

    (11)

    (10)

    123456

    (a)(b)

    (9) (9) (3)(4)(5)(6)(7)(8)

    (1)(2)

    (11)

    (10)

    1 2 3 4 5 6

    (a)(b)

    Item Designation(1) AC overvoltage protection (optional)(2) (a) (b)

    Back-up fuse for CEE socket (optional)FILS 16 A / 30 mABack-up fuse for CEE socket (optional)

    (3)(4)(5)(6)(7)(8)

    Fuse for inverter50 A

    The number of fuses depends on the number of inverters present (3 to maximum of 6).

    (9) Back-up fuse for AC overvoltage protection (optional)80 A

    (10) Connections for data communication cables to the invertersRJ45, Fronius Solar Net

    (11) Connections for external data communication cablesInverter number1-657

  • Fitting inverter wall brackets and AC Combiners

    Working with and on the inverters

    Fitting inverter wall brackets

    Separate the wall brackets from the inverter in line with the inverter installation instruc-tionsFit the wall brackets to the crossmembers

    (A) Front side (B) Rear side

    NOTE! As a general principle, all work with and on the inverters must be carried out in line with the installation instructions for the relevant inverter. Observe safety instructions and warning notices in the installation instructions for the inverters.

    1

    2

    (A) (B)58

  • ENAC Combiner - fit-ting

    IMPORTANT! The cable outlets on the AC Combiner may only face downwards.

    AC Combiner - fitting to the crossmembers

    e.g.: AC Combiner with prefabricated cables

    1

    4x

    38,5 kg

    56,3 kg59

  • For an AC Combiner with prefabricated cables:

    Lay out the cables

    Install the cables in the cable tray

    e.g.: Cables installed in the cable tray

    2

    360

  • ENConnecting the data communication cable to the AC Combiner

    General If the AC Combiner is supplied without prefabricated data communication cables, the in-staller is personally responsible for selecting and purchasing the appropriate cables.

    Minimum requirement for cables

    - Min. CAT5- External diameter of cable 6 mm - max. 13 mm

    For installation outdoors:

    - The cables must be suitable for outdoor use.- The cables must be resistant to UV.

    Further information on data communication cables:

    http://www.fronius.com/QR-link/4204101938Guidelines for DATCOM cabling

    Connecting the data communica-tion cables to the AC Combiner Open the

    AC CombinerRemove the metal covers

    Loosen the M20 metric screw jointsInsert the data communication cables for external connection through the metric screw joints from below into the AC Combiner

    IMPORTANT! In the AC Combiner , the cable shields for the data communication ca-bles must not be connected with earth potential.

    12

    13

    11

    12

    3

    3 34

    5

    5

    5

    5

    6

    1

    3461

  • Connect the data communication cables for external connection in line with the en-closed fitting instructions

    IN OUT1 +12V +12V2 GND GND3 TX+ RX-4 RX+ TX-5 RX- TX+6 TX- RX+7 GND GND8 +12V +12V

    You can find help with connecting the cables at

    http://www.rutenbeck.de/fileadmin/user_upload/pdfs_downloadbereich/Visuelle%20Praesentationen/Datentechnik/Praesentation_Universalmodul.pdf

    Loosen the M25 metric screw jointInsert the data communication cables from the inverters through the M25 metric screw joint from below into the AC CombinerConnect the data communication cables from the inverters accordingly (IN / OUT)Tighten the metric screw jointsM20: Tightening torque = 2.6 NmM25: Tightening torque = 4.0 Nm

    5

    67

    8962

  • ENConnecting AC IN cables

    General Connecting AC cables is only necessary if the AC Combiner is supplied without prefabri-cated cables.The installer is personally responsible for selecting and purchasing the appropriate cables.

    Minimum requirement for cables

    Working with and on the inverters

    Connecting AC IN cables

    Install the AC IN cable from the AC Combiner to the closest inverter

    7 - Swivel out the fuse- Remove the fuse

    AC IN cables AC OUT cablesL1 / L2 / L3 / N / PEExternal diameter: max. 23 mm

    L1 / L2 / L3 / PEorL1 / L2 / L3 / N / PEExternal diameter:min. 27 mm - max. 66 mm

    NOTE! As a general principle, all work with and on the inverters must be carried out in line with the installation instructions for the relevant inverter. Observe safety instructions and warning notices in the installation instructions for the inverters.

    1

    1263

  • 8 - Pull the plastic clamp upward

    9 - Loosen the metric screw joint on the underside of the AC Combiner

    - Insert the AC IN cable through the me-tric screw joint from below into the AC Combiner

    - Attach the clamp of the strain-relief de-vice to the rail

    - Fix the AC IN cable in place using the clamp of the strain-relief deviceCross-head screwdriverTightening torque = 1.5 Nm

    IMPORTANT! - Use appropriate ferrules when connecting the individual lines.- Calculate the cable lengths so that no loops are created.

    1 - Connect the ground conductor PE to the lower copper rail labelled with "PE"TX25 Torx screwdriverTightening torque = 3.0 Nm

    1

    3

    32

    14 7

    5 86 9

    4

    2

    1

    564

  • EN2 - Connect the neutral conductor N to the upper copper rail labelled with "N"TX25 Torx screwdriverTightening torque = 3.0 Nm

    3 - Connect the L1, L2 and L3 lines to the fuse holderTX25 Torx screwdriverTightening torque = 12.0 Nm

    4 - Pull the plastic clamp downward and lock in place

    2

    1

    6

    4

    1

    2

    3

    3x

    TX25

    7

    1

    865

  • 5 - Tighten the metric screw jointTightening torque = 14.0 Nm

    Connect the AC IN cable to the inverter in line with the inverter installation instructionsRepeat the steps for all inverters

    1

    9

    101166

  • ENOther work on the inverters

    Working with and on the inverters

    Other work on the inverters

    Connect the DC cables to the inverters in line with the inverter installation instructions

    IMPORTANT! When attaching the power stage sets to any cables, take note of overvolt-age protection in the inverter.Install the cables in line with the inverter installation instructions. Do not clamp the cables.

    Attach the power stage sets and fix to the wall brackets with screwsConnect the inverters and AC Combiner with one another using data communication cables

    If necessary, install and connect other DATCOM components (e.g. Fronius Sensor Card)If the AC Combiner and the inverters do not incorporate any overvoltage protection:mount the DATCOM cover on the inverters

    If the AC Combiner and/or the inverters incorporate overvoltage protection, connect this in line with the following section.

    NOTE! As a general principle, all work with and on the inverters must be carried out in line with the installation instructions for the relevant inverter. Observe safety instructions and warning notices in the installation instructions for the inverters.

    1

    23

    INININ IN IN IN

    IN OUT

    OUT OUT OUT OUT OUTOUT

    IN OUT

    123456

    INOUT

    Sensors www.

    3rd Party Datalogger

    4

    567

  • Connecting the AC overvoltage protection (optional)

    Connecting the AC overvoltage protection: Over-voltage protec-tion in the inverters and in the AC Combiner

    For all inverters other than the inverter directly adjacent to the AC Combiner :connect the cable from the overvoltage protection to the switchable multifunction cur-rent interface (see installation instructions, option DC OVP type 2)

    Connect the cable (1) from the AC Combiner to the inverter directly adjacent to the AC Combiner as follows:

    Overview(1) 2-pin cable from the AC overvoltage protection of the AC Combiner, includ-

    ing clamp, one individual cable connected(2) 2-pin cable from the overvoltage protection of the inverter, including mating

    connector for the multifunction current interface of the inverter(3) Individual cable from the overvoltage protection of the inverter(4) Free individual cable from the AC overvoltage protection of the AC Combin-

    er

    Insert the cable (1) through the metric screw joint into the data communication area of the inverter

    1

    2

    1

    (1)

    (2)(3)

    (4)

    2a

    (1)

    1(2)

    (1)68

  • ENDisconnect one individual cable (3) from the plug of the overvoltage protection cable (2)

    Connect the individual cable (3) to the plug of cable (1);Lock the plug of cable (1)

    2b

    (1)

    2

    1

    (3)(2)

    2c

    1

    2

    (2)

    (1)

    (3)69

  • Fit the DATCOM cover to the inverter

    Connect the free individual cable (4) from the cable (1) to the free plug port of the cable (2)

    Connect the cable (2) to the switchable multifunction current interface of the inverter

    2d

    (2)

    (1)

    1

    (4)

    2e

    1

    (1)

    (2)

    370

  • ENConnecting the AC overvoltage protection: Over-voltage protec-tion only in the AC Combiner

    Connect the cable (1) from the AC Combiner to the inverter directly adjacent to the AC Combiner as follows:

    Fit the DATCOM cover to the inverter

    Overview(1) 2-pin cable from the AC overvoltage protection of the AC Combiner, includ-

    ing clamp, one individual cable connected(2) Mating connector for the multifunction current interface of the inverter

    Insert the cable (1) through the metric screw joint into the data communication area of the inverter

    Disconnect the mating connector (2) from the inverter

    Disconnect the clamp from the cable (1)

    Connect the cable (1) to the mating connector (2)

    Connect the cable (1) with the mating connector (2) to the multifunction current in-terface of the inverter

    1

    1

    (1)

    (2)

    1a

    1b

    1c

    1d

    1e

    271

  • Connecting AC OUT cables

    General The installer is personally responsible for selecting and purchasing an appropriate cable and suitable cable lugs.The connection of aluminium cables is permitted.

    Connecting AC OUT cables

    1 - Remove the contact protection2 x TX25

    - Remove the five hexagon bolts from the copper railsSize 19 mm

    2 - On the underside of the AC OUT cable outlet, cut out an opening that corres-ponds to the external diameter of the cable used

    2

    1

    3

    4

    6

    5

    7

    9

    8

    10

    1

    1

    2

    28 m

    m37

    mm

    45 m

    m52

    mm

    62 m

    m67

    mm72

  • EN1 - Strip the insulation from approximately 400 mm of the AC OUT cable

    - Insert the AC OUT cable through the cable outlet from below, into the AC Combiner

    2 - Secure the AC OUT cable outlet

    1

    3

    1

    4

    1 - Align the individual cable with the connections

    - Cut the individual cable to length ac-cordingly, taking note of the cable lugs used

    5

    L1

    L2

    L3

    N

    PE73

  • 1The cable lugs are not included in the sco-pe of supply for the Fronius Power Package and must be selected by the installer de-pending on the type of cable used.

    - Attach the M12 cable lug to the ground conductor PE

    - Where necessary, fit suitable shrink sleeve on the cable lug(not shown in the image)

    2 - Connect the ground conductor PE to the lower copper rail

    - Attach M12 cable lugs to the remaining lines

    - Where necessary, fit suitable shrink sleeves on the cable lugs(not shown in the image)

    IMPORTANT! When connecting the L1 line, ensure that the spacer is bet-ween the copper rail and the cable lug.

    - Connect the remaining lines to the cop-per rails

    Tightening torque = 70 Nm

    3

    IMPORTANT! Only when using a 5-pin AC OUT cable:

    - Remove the copper bracket between the copper railsSize 19 mm

    If earthing is connected, there cannot be a PEN bracket in the AC CombinerWhen using a 4-pin AC OUT cable (e.g. for a TNC grid), the copper bracket remains in the AC Combiner.

    1

    6

    13

    2

    4

    6

    10

    8

    9

    5

    7

    7

    3

    12

    4

    874

  • EN4 - Fit the contact protection2 x TX25

    5 - Fit the covers

    Provide an external strain-relief device for the AC OUT cable

    4

    3

    1

    2

    9

    1

    3

    3

    5

    3

    6

    4

    1

    2

    5

    5

    7

    77

    75

    5

    2

    22

    10

    1175

  • Start-up

    Prerequisites for commissioning

    - The AC IN cables must be connected to the inverters and in the AC distributor.- The inverters must be connected on the DC side.- The AC OUT cable must be connected in the AC Combiner and to the public grid.- Any existing overvoltage protection must be connected to the inverter.- All contact protection devices and covers must be fitted to the inverters and also to the

    AC Combiner .

    Commissioning Commissioning of the inverters must only be carried out in line with the inverter installation instructions and operating instructions.

    Carry out AC-side insulation measurement on the AC CombinerSet up the AC power supplyCheck the rotary field

    6 - Insert the fuses- Swivel the fuses into place

    Close the AC CombinerSwitch on the inverterSet the required language on the inverterSet the country setupSet the date and timeSet the MPP Tracker 2If overvoltage protection is present:implement the settings for the overvoltage protection BASIC menu / Input signal / Ext. Sig. / Triggering method: Warning / Connection type: N/CSet the inverter number in the Setup menu under DATCOMIf system monitoring via Fronius Datamanager 2.0 is in place:run the setup wizard

    123

    1

    4

    567891011

    121376

  • ENFurther informa-tion

    You can find further information on the inverters or system monitoring in the following doc-uments:

    Designation DE EN

    Installation instructions for Fronius Symo 10 - 20 kW

    http://www.fronius.com/QR-link/4204260175DEhttp://www.fronius.com/QR-link/4204260175EN

    Operating instructions for Fronius Symo

    http://www.fronius.com/QR-link/4204101909(DE, FR, NL)http://www.fronius.com/QR-link/42042102028(EN, IT, PT-BR)

    Operating instructions for Fronius Datamanager 2.0

    http://www.fronius.com/QR-link/4204260191DEhttp://www.fronius.com/QR-link/4204260191EA77

  • Maintenance

    Maintenance in-terval

    Irrespective of the usage and environmental conditions, maintenance must be carried out regularly, at least once a year, and must be documented accordingly.

    Maintenance ac-tivities

    1. Check the hinges of the doors for ease of movement and spray with a suitable, water-free lubricant.

    2. Check the lock for ease of movement. Spray all moving lock parts with a suitable, wa-ter-free lubricant.

    3. Where damaged, completely replace seals in the area of contact edges.

    4. Common products such as talcum powder, Vaseline or wax can be used to prevent damage caused by the seals freezing at low temperatures.Examine all components and surfaces for external damage.

    5. Repair any damage to the coating as follows: Small cases of damage affecting only one part of the surface (e.g. scratches):

    gently sand down the surface at the site of the damage and remove all traces of corrosion and all dirt. Depending on the extent of the damage, apply touch-up paint (2K-PUR acrylic paint), using either a touch-up stick, a paintbrush or a paint cartridge.

    Large areas of damage:rub down the surface evenly and clean with white spirit; then paint over the entire surface with touch-up paint (2K-PUR acrylic paint).78

  • ENTechnical data

    Technical data

    1) Optional2) Pre-fabricated cables

    Rated current 200 ARated short circuit current 38 kA (250 A gG back-up fuse)Ambient temperature range -25 - +45 CGrid topology TN (universal: TN-C, TN-S and TT grids)AC overvoltage protection 1) Type 1+2+3 incl. 80 A back-up fuseAC input/output 3PN 400/230VFrequency 50 Hz/60 HzAC inputs 3 - 6 x max. 20 kVA/input,

    fused 3P 50A NH000Max. output power 120 kVADimensions (height x width x depth) 750 x 700 x 300 mmWeight (without cables) 38.5 kgHousing Open air wall-mounted housing

    ALU 99.5HH powder coatedProtection class IP 54AC connection 1) 2) H07RN-F 5G10mmData communication connection 1) 2) Patch cable, 2 m, shielded, RJ45,

    UV-resistantService socket 1) 1PN 230 V/16 A/30 mA, CEECompliance with standards EN 61439-279

  • 80

  • 81

    EN

  • Fronius Worldwide - www.fronius.com/addresses

    Under http://www.fronius.com/addresses you will find all addresses of our sales branches and partner firms!

    Fronius International GmbH4600 Wels, Froniusplatz 1, AustriaE-Mail: [email protected]://www.fronius.com

    Fronius USA LLC Solar Electronics Division6797 Fronius Drive, Portage, IN 46368E-Mail: [email protected]://www.fronius-usa.com