Welche Website für welches Unternehmen? Und welches CMS für welche Anforderungen?
#iPASO400_softkey
-
Upload
diliyanzah-asri -
Category
Documents
-
view
218 -
download
0
Transcript of #iPASO400_softkey
-
8/10/2019 #iPASO400_softkey
1/5
Source Doc. No: IMPORTANT NOTICE, READ BEFORE USE Rev. No. & Date 400-iPASO116-01 / Mar 2011 Software key
As this document contains information necessary for NEC's internal document management such as revision numbers,revision history etc., it is strictly prohibited to provide this document in full, in printed or electronic form to the customers.However, necessary information without the internal references can be extracted and included in documents presented tothe customer.CONFIDENTIAL
SOFTWARE KEY iPASO-400
GeneralSoftware key is a powerful, yet easy-to-use multi-dimensional equipment management toolthat could facilitate the customers requirement for capacity and configuration expansion orupgrades. The iPASOLINK hardware support all capacities and configurations. Initiallycustomer can acquire the capacity and redundancy configuration required for the currenttraffic requirements to keep the cost down. When the traffic requirement expand or grows,additional capacities can be enabled by acquiring a software key.
To facilitate the customer requirements of larger traffic needs, software key is a powerful, yeteasy-to-use multi-dimensional equipment management tool to upgrade iPASOLINK 400.
1. KEY FEATURES AND BENEFITS
1.1 Upgradable by Software KeyUpgrading the equipment can be done easily by installing the software key.1.2 Product Cost DownThe software key function is a very cost effective feature that allows the customer to upgradethe system configuration.1.3 Upgrading Whenever NeededWhen traffic volume increases, you may need to increase the capacity. iPASOLINK 400 can
be upgraded by software key(s) whenever needed.1.4 Flexible Software Key SelectionSelect the software key depending on what needs to be upgraded/changed in your equipment.
2. SOFTWARE KEY TYPES
Software key is classified into two types:
Initial KeyInitial Key is installed into the equipment at the NEC factory before shipment.
Upgrade KeyUpgrade key is installed into iPASOLINK 400 equipment.Upgrade key is defined and made effective by a combination of two paramThe Parameter After Change is regarded as Parameter Before Change eters:Upgrade Key Item Name: Parameter Before Change to Parameter After change
Example:
-
8/10/2019 #iPASO400_softkey
2/5
Source Doc. No: IMPORTANT NOTICE, READ BEFORE USE Rev. No. & Date 400-iPASO116-01 / Mar 2011 Software key
As this document contains information necessary for NEC's internal document management such as revision numbers,revision history etc., it is strictly prohibited to provide this document in full, in printed or electronic form to the customers.However, necessary information without the internal references can be extracted and included in documents presented tothe customer.CONFIDENTIAL
Radio capacity-1: 10MB to 100MBin the next upgrade process.
Please refer to the following tables for initial/upgrade key variations.
System & Radio Key
No. Key Item Initial Key Key Configuration Upgrade Key-1 Upgrade Key-21 Radio Redundancy 1+0 Default 1+0 to 1+1 (1 pair) 1+0 to 1+1 (2 pair)
1+1 (1 pair) 1+1 (1 pair) to1+1 (2 pair)
1+1 (2 pair)2 ETH Traffic
Aggregation@N+0 Radio
OFF Default OFF to ON
ON
3 Radio BITRATE FIXED Default FIXED to FREE FIXED to AMRFREE FREE to AMRAMR
4 XPIC Function OFF Default OFF to XPIC 1P OFF to XPIC 2PXPIC 1P XPIC 1P to
XPIC 2PXPIC 2P
5 NEO ODUCompatibility
OFF Default OFF to ONON
Summary of the required soft-keys for radio system configurationConfiguration
N+0 N-way 1+1 2x(1+1) 1+0 XPIC 2x(1+0 XPIC)
1+1 XPIC
Radio Redundancy 1+0 1+0 1+1 1P 1+1 2P 1+0 1+0 1+1 1PRadio Capacity N key N key 1 key 2 key 2 key 4 key 2 keyXPIC Function OFF OFF OFF OFF XPIC 2P XPIC 2P XPIC 1P
-
8/10/2019 #iPASO400_softkey
3/5
Source Doc. No: IMPORTANT NOTICE, READ BEFORE USE Rev. No. & Date 400-iPASO116-01 / Mar 2011 Software key
As this document contains information necessary for NEC's internal document management such as revision numbers,revision history etc., it is strictly prohibited to provide this document in full, in printed or electronic form to the customers.However, necessary information without the internal references can be extracted and included in documents presented tothe customer.CONFIDENTIAL
Radio Capacity Key
Key Item InitialKey
KeyConfig
UpgradeKey-1
UpgradeKey-2
UpgradeKey-3
UpgradeKey-4
UpgradeKey-5
UpgradeKey-6
UpgradeKey-7
RadioCapacity
10MB Default 10MB to20MB
10MB to50MB
10MB to100MB
10MB to150MB
10MB to200MB
10MB to300MB
10MB to400MB
20MB 20MB to50MB
20MB to100MB
20MB to150MB
20MB to200MB
20MB to300MB
20MB to400MB
50MB 50MB to100MB
50MB to150MB
50MB to200MB
50MB to300MB
50MB to400MB
100MB 100MB to150MB
100MB to200MB
100MB to300MB
100MB to400MB
150MB 150MB to200MB
150MB to300MB
150MB to400MB
200MB 200MB to300MB
200MB to400MB
300MB 300MB to400MB400MB
The relation among Channel Spacing , Modulation Rate and Traffic rate are described as bellow.
-
8/10/2019 #iPASO400_softkey
4/5
Source Doc. No: IMPORTANT NOTICE, READ BEFORE USE Rev. No. & Date 400-iPASO116-01 / Mar 2011 Software key
As this document contains information necessary for NEC's internal document management such as revision numbers,revision history etc., it is strictly prohibited to provide this document in full, in printed or electronic form to the customers.However, necessary information without the internal references can be extracted and included in documents presented tothe customer.CONFIDENTIAL
ETH & TDM Key
No. Key Item InitialKey
Key Configuration Upgrade Key-1 Required OptionModule
1 RJ45 Port Usage inMain Board(2xFE or 2xGbE)
2xFE Default 2xFE to 2xGE
2xGbE
2 SFP Port Usage inMain Board
OFF Default OFF to 2xGbE2xGbE
3 SFP Port Usage peroptional GbE card
OFF GbE ModuleON
4 Additional VLANTable
OFF Default 256 to 4094 TableON
5 LAG/LACP forEthernet Line *1
OFF Default OFF to ONON
6 Ethernet OAM(CC/LT/LB) OFF Default OFF to ONON7 Ethernet OAM
(LM/DM)OFF Default OFF to ONON
8 QoS Classify 4 Lv Default 4 Lv to 8 Lv8 Lv
9 E1 SNCP OFF Default OFF to ON Clock ModuleON
10 STM-1 APSProtection *2
OFF Default OFF to ON STM1 ModuleON
11 STM-1MUX/DEMUX *2
OFF Default OFF to ON Clock ModuleSTM1 ModuleON
Note:*1
-
8/10/2019 #iPASO400_softkey
5/5
Source Doc. No: IMPORTANT NOTICE, READ BEFORE USE Rev. No. & Date 400-iPASO116-01 / Mar 2011 Software key
As this document contains information necessary for NEC's internal document management such as revision numbers,revision history etc., it is strictly prohibited to provide this document in full, in printed or electronic form to the customers.
documents presented toHowever, necessary information without the internal references can be extracted and included inthe customer.CONFIDENTIAL*2
Extension Function Key
No. Key Item InitialKey
Upgrade N/C Key(N/C: No Change)
Upgrade Key-1 Required OptionModule
1 Sync. ETH Clock OFF N/C OFF to ON CLK2M-CON
2 IEEE 1588v2 PTPClock
OFF N/C OFF to ON CLK2M-CON