Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5...

241
Katalog Industrie Catalogue industry 1.1 2003 - 2004 www.schlemmer-kabelschutz.de www.schlemmer-group.com

Transcript of Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5...

Page 1: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Katalog Industrie

Catalogue industry

1.1

2003

- 20

04

www.schlemmer-kabelschutz.dewww.schlemmer-group.com

Page 2: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Wichtige Hinweise:

Mit dem Erscheinen dieses Kataloges verlieren alle bisherigen Unterlagen ihre Gültigkeit. Dieser Katalog ist ausschließlich für den Großhandel und die Industrie alsArbeitsunterlage bestimmt.

Es gelten ausschließlich unsere Verkaufs-, Lieferungs- und Zahlungsbedingungen.Sie finden diese im Anhang.

Unsere Druckschriften sollen nach bestem Wissen beraten, eine Rechtsverbindlich-keit kann daraus jedoch nicht abgeleitet werden. Abbildungen und Zeichnungen ins-besondere hinsichtlich Größe und Ausstattung der gezeigten Produkte sind unver-bindlich.

Technische und formale Änderungen an unseren Erzeugnissen, die dem technischenFortschritt dienen, behalten wir uns vor. Es erfolgen permanent Änderungen undErgänzungen.

Die Bestellnummernübersicht im Anhang dient vorrangig der schnellen Orientierunginnerhalb dieses Kataloges. Abweichungen beruhen auf Satzfehlern.Bitte erfragen Sie in diesem Fall die gültigen Daten.

Impressum:

Herausgeber: Schlemmer GmbHGestaltung: Schlemmer MarketingSatz/Druck/Litho: Offsetdruck Dersch GmbH & Co., HörlkofenFoto: Fotostudio Naglik, Erding

Stand: März 2003Erscheinungsweise: 2-jährlich

Erklärung der Textabkürzungen:

Alle Maßangaben sind, sofern nicht anders angegeben, in mm

VE = Verpackungseinheiten

E = Gewindelänge

L = Gesamtlänge

SW = Schlüsselweite

NW = Nennweite

= siehe technischer Anhang

= Flammschutz

Schlemmer GmbHGruber Straße 4885586 PoingGERMANY

Phone +49/(0)8121/804-0Fax +49/0)8121/804-113e-mail: [email protected]: www.schlemmer-kabelschutz.de

www.schlemmer-group.com

Important Note:

All previous documents are outdated with the publication of this catalogue.This catalogue is exclusively prepared as a technical guide for wholesale and industrial use.

Our conditions of sales, delivery and invoice can be found at the end of this catalogue.

Our documents are prepared as a guide to the best of our knowledge. We must although ascertain that no liabilities can be derived from any of the contents. Pictu-res and drawings, especially size and design are without obligation.

We reserve the right to alter our products to serve technical progress. Alterationsand amendments shall follow continually.

The registry with the order numbers is mainly to serve as a quick orientation guide.Deviations are related to printing errors. In any case please inquire for the exactdetails.

Imprint:

Publisher: Schlemmer GmbHDesign: Schlemmer MarketingTypesetting/Printing/Lithography: Offsetdruck Dersch GmbH & Co., HörlkofenPhotographs: Fotostudio Naglik, Erding

Printing date: March 2003Published: every 2 years

Explanation of text abbreviations:

All dimensions if not otherwise indicated are in mm.

PU = packaging unit

E = thread length

L = complete length

SW = across flats

NW = nominal number

= see technical appendix

= flame resistant

i

§

i

§

Page 3: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Tube Protection Systems 5-66Corrugated TubesTube Glands

Cable Gland Systems 67-138PlasticMetal

Integral Parts 139-194Lock NutsReducerEnlarger

Fixing Material Systems 195-208Cable ties

Technical Appendix 209-218

Article Number Index 219-235

Sales and Delivery Terms 239-240

Company Profile 2-3

Inhaltsverzeichnis Contents Seite/page

Schutzschlauchsysteme:WellschläucheSchlauchverschraubungen

KabelverschraubungenKunststoffMetall

ErgänzungsteileGegenmutternReduzierungenErweiterungen

BefestigungssystemeKabelbinder

Technischer Anhang

Artikel-Nr. Verzeichnis

Verkaufs- und Lieferbedingungen

Unternehmensdarstellung

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

sKa

belv

ersc

hrau

bung

enCa

ble

Glan

d Sy

stem

Ergä

nzun

gste

ileIn

tegr

al P

arts

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

Tech

nisc

her A

nhan

gTe

chni

cal A

ppen

dix

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

1

Page 4: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

2 SchlemmerKABELSCHUTZSYSTEME

Die Schlemmer Erfolgsstory

Seit unserer Gründung 1954haben wir den Vetrieb und dieHerstellung von Kabelschutzsy-stemen kontinuierlich aufgebaut.

Innovative Produktentwicklung,konsequenter Ausbau unsererProduktionskapazitäten, modern-ste Logistik und unser Qualitäts-sicherungs-System sind die Voraussetzungen dafür, dassSCHLEMMER heute als Herstellerund Lieferant im Bereich Kabel-schutzsysteme und elektroni-scher Bauelemente für die Automobilindustrie und derenSystemlieferanten sowie fürIndustrie und Großhandel, imMaschinen- und Schiffbau welt-weit anerkannt ist.

Mit Sicherheit Leistung – dennLeistungsfähigkeit und Qualitätsind für uns untrennbar verbun-den. Deshalb ist unser oberstesZiel der unbedingte Qualitätsan-spruch, gute Produkte noch esser zu machen und sie unserenKunden zu einem optimalenPreis-Leistungsverhältnis an-zubieten. Qualitätssicherung wirdals eine Folge ineinandergreifen-der Maßnahmen realisiert, dievon der Produktentwicklung biszur Betreuung unserer Kundenwirksam werden. Zahlreiche Aus-zeichnungen als „A-Lieferant“und „Alleinlieferant“ belegen diesen Anspruch und sind gleich-zeitig unser Ansporn, das Erreich-te noch weiter auszubauen.

Der Kundennutzen steht für unsstets im Vordergrund. Deshalbsind wir in enger Zusammenar-beit mit den Entwicklungsabtei-lungen unserer Kunden ständigbemüht, neue Lösungen für diewachsenden Markt- und Kunden-bedürfnisse zu finden. Als Ergeb-nis eines optimierten Fertigungs-prozesses fertigen wir bedarfsori-entiert und schnell.

München

Schwabing

Stuttgart

Dachau

AB KreuzNeufahrn

Nürnberg

Allershausen

Freising

Hallbergmoos

Moosinning

LandshutDeggendorf

Erding

ABKreuzMü. Nord

Flughafen-TangenteOstim Bau

Markt SchwabenPliening

Grub

ABAusfahrtParsdorf

ABKreuzMü. Ost

Passau

Salzburg

Garmisch

Lindau

N

A 92

A 92

A 94

A 99

A 8

A 8

A 9

A 96

A 95

Ismaning

ABAusfahrtKirchheim

POING

Flug-hafenMünchen

Garching

Hauptschule

Gru

ber S

tr.

Alte Gruber Str.

Zur A94

Plien

ing

er Str.

nachPliening

P+R

Bürgerstr.

Marktstr.

Poing

SchlemmerKABELSCHUTZSYSTEME

So finden Sie zu uns

How to find us

Unser mit modernster Technikausgestattetes vollautomatischesHochregallager und eine ausge-feilte Logistik garantieren diesofortige Lieferung von über 20Mio. Einzelteilen. Die prompteund zuverlässige Belieferungunserer Kunden „Just-in-Time“ist Garant für größtmögliche Kun-denzufriedenheit.

Unser weltweit organisiertes Ver-triebsnetz in Form von Produkti-onsbetrieben, Tochtergesellschaf-ten, Niederlassungen und Part-nerunternehmen garantieren dieinternationale Präsenz in dynami-schen Märkten. Die Nähe zuunseren Kunden ist elementarerBestandteil unserer Leistungenund sichert die schnelle Betreu-ung vor Ort.

Unser Hauptsitz in Poing

bei München

Headquarter in Poing

near Munich

Page 5: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

3SchlemmerKABELSCHUTZSYSTEME

Schlemmer’s story of success

We have continually expanded theproduction and distribution ofcable protecting systems sincebeing established in 1954.

Innovative product development,continual expansion of our pro-duction capacities, modern logi-stic support and our quality assu-rance system are the importantfactors that have given SCHLEM-MER the reputation to be a world-wide manufacturer and supplierin the field of cable protectionsystems and electronic buildingequipment for the automotiveindustry with their chain of sup-pliers as well as for the industryand wholesalers of the machiningand shipbuilding industry.

„Safety and Power“ – because forus, productivity and quality areindivisibly bound together. There-fore our supreme goal is anunconditional claim for quality, tomake excellent products evenbetter and to offer these to ourclients at an optimum price/per-formance ratio. Quality assuranceis understood as a consequenceof cross-functional measuresbeing effected through the deve-lopment of products to supportour clients needs. Numerousawards such as „A-Supplier“ and„Exclusive Supplier“ certify thisclaim and is at the same time ourcontinuous motivation to amplifythis achievement.

Our constant emphasis is tobenefit our clients. We therefore,in close co-operation with theresearch and developmentdepartments of our clients arecontinuously in effort to offer newsolutions for the growing marketand the client demands. Wemanufacture according todemand and quickly as a result ofan optimised production process.

Our fully automatic high-rack sto-rage system equipped with themost modern technology and aperfect logistics system, guaran-tee the prompt delivery of morethan 20 million single parts. Thequick and reliable delivery to ourclient „Just-in-time“ is the assu-rance of a most satisfied client.

Our world-wide organized distri-bution network consisting of pro-duction facilities, subsidiary com-panies, branch offices and part-ner enterprises guarantee theinternational presence in thedynamic markets. The „neigh-bourhood“ to our clients is anessential part of our performanceand guarantees quick on-sitesupport.

Unser vollautomatisches Hochregallager in Haßfurt

Our fully automatic high-rack storage system in Haßfurt

„Just-in-time“ ist Garant für größt-mögliche Kundenzufriedenheit.

„Just-in-time“ is the assurance of amost satisfied client.

Zertifiziert nachCertified acc. to

ISO 9001:2000ISO 14001ISO/TS 16949

Page 6: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

4 SchlemmerKABELSCHUTZSYSTEME

Page 7: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

5

Kunststoff-WellschläuchePolyflex Normalprofil PA 6Polyflex „leicht“ PA 6Polyflex „schwer“ PA 6Polyflex Normalprofil PA 12Polyflex Normalprofil PPPolyflex Normalprofil PPmodPolyflex verschließbar PPmodpassende Verschraubung: SEM Quick

SEMSEM-KombiNH

Zubehör: Dichtungen für SEM QuickWellschlauchhalterFlansch für WellschlauchhalterSicherheitsöffner für SEM QuickDichtringKlemmschellenUniversal-Verschraubungshalter

MetallschläucheLIQUIDTIDE N, X.T.ANACONDA SEALTITE E.F., H.C., H.T.D.L., N.M.U.A.passende Verschraubung: gerade, 90°-Winkel

MS-B Metallschläuche blankpassende Verschraubung: Rakkord MS-B

MS-PVC mit PVC-UmmantelungMS-PU mit PU-Ummantelungpassende Verschraubung: Rakkord MS-PVC/MS-PU

MS-DU mit DrahtumflechtungMS-PVC-DU mit PVC- u. Drahtumflechtungpassende Verschraubung: Rakkord MS-DU

Rakkord MS-PVC-DU

Rakkordflex PVCpassende Verschraubung: NH RakkordflexUniversalverschraubung: BI-MOZubehör: Erdungseinsätze BI-MO

Rakkord-DU (Vinnylan-DU) mit DrahtumflechtungRakkord (Vinnylan) PVCpassende Verschraubung: Serie 75

KSV

KU PVC

Schlemmer-Gigant PA 6 + PA 12passende Verschraubung: Schlemmer-Gigant

Schlemmer-Gigant PPpassende Verschraubung: Anschlussarmaturen

Isolierschläuche PVCGummi-Endmuffen NeoprenHohldrahtgeflecht HG, HG-PPSpiralband PE

Wellschläuche + Schlauchverschraubungen

Corrugated Tubes + Conduit Glands

Seite/pagePlastic corrugated tubesPolyflex normal profile PA 6 6-7Polyflex „light“ PA 6 8Polyflex „heavy“ PA 6 9Polyflex normal profile PA 12 10Polyflex normal profile PP 11Polyflex normal profile PPmod 12Polyflex lockable PPmod 13Suitable glands: SEM Quick 14-19

SEM 24-25SEM-Kombi 26NH 28-31

Accessories: Sealings for SEM Quick 20Corrugated tube holder 21Flange for corrugated tube holder 22Safety-Opener for SEM Quick 23Sealing ring 27Clamping Clip 27Universal-Gland-Holder 32

Metal tubesLIQUIDTIDE N, X.T. 33ANACONDA SEALTITE E.F., H.C., H.T.D.L., N.M.U.A. 34-35Suitable gland: straight, 90°-angle 36

MS-B Metal tubes, unfinished 37Suitable glands: Rakkord MS-B 38-39

MS-PVC with PVC sheating 40MS-PU with PU sheating 41Suitable gland: Rakkord MS-PVC/MS-PU 42-43

MS-DU with wired mesh 44MS-PVC-DU with PVC and wire mesh sheath 47Suitable gland: Rakkord MS-DU 45-46

Rakkord MS-PVC-DU 48-49

Rakkordflex PVC 50Suitable gland: NH Rakkordflex 51Universal gland: BI-MO 52Accessory: Ground inserts BI-MO 53

Rakkord-DU (Vinnylan-DU) with wire mesh sheath 54Rakkord (Vinnylan) PVC 56Suitable gland: series 75 55

KSV 57

KU PVC 58

Schlemmer-Gigant PA 6 + PA 12 60Suitable gland: Schlemmer-Gigant 61

Schlemmer-Gigant PP 62Suitable gland: Connector fixings 63

Insulating tubes PVC 64Rubber end sleeves Neoprene 59Hohldrahtgeflecht HG, HG-PP 65Spiral tape PE 66

Page 8: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Wellschlauch PA 6 Normalprofil

Material:Polyamid 6Obere Gebrauchstemperatur:kurzzeitig (240 h): 150°CKennzeichen:• parallel gewelltEigenschaften:• flammhemmend nach FMVSS 302,

<100 mm/min• halogenfrei• trittfest• UV-Beständigkeit nach

DIN EN ISO 8580

PA 6120°

–-40°

Corrugated tube PA 6Normal Profile

7,5 6,7 10,0 13 1200070 1203907 508,5 8,4 11,7 15 1200089 1203908 50

10 9,9 13,0 20 1200100 1203910 5012 12,2 15,7 30 1200127 1203912 5013 12,7 15,8 35 1200135 - 5014 14,2 18,5 40 1200143 1203914 5016 15,0 18,9 45 1200160 - 5017 16,6 21,2 45 1200178 1203917 5019 19,3 24,3 50 1200194 - 5022 21,3 25,4 50 1200224 - 5023 23,2 28,3 55 1200232 1203923 5026 25,8 31,2 60 1200267 - 2529 29,0 34,5 65 1200291 1203929 2537 36,0 42,4 90 1200372 1203937 2550 47,7 54,0 100 1200500 1203950 25

*) Auch als 10 m Ring und in Container-Verpackungseinheit lieferbar

Passende Schlauchverschraubungen:SEM-Quick, Seite 14-19SEM, Seite 24-25SEM-Kombi, Seite 26NH, Seite 28-31

Anwendungsbereiche:• z.B. im Motorraum, Karosserie und

Fahrzeuginnenraum, Maschinen,Apparate, Geräte, Schiffs- und Bahnbau, Schaltschränke undbewegliche Maschinenteile

Material:Polyamide 6Upper temperature range:short-term: 150°CCharacteristics:• parallel corrugatedFeatures:• flame retardant according

to FMVSS 302, <100 mm/min• free of halogen• durable• UV resistance acc. to

DIN EN ISO 8580

Applications:• e.g. engine compartment, car body

and interior, machines, instruments,devices, ship and train building,switch cabinet and movable machi-ne parts.

*) also available as a 10 meter ring and as container package unit.

Suitable conduit glands:SEM-Quick, page 14-19SEM, page 24-25SEM-Kombi, page 26NH, page 28-31

6

NW I-Ø A-Ø Biegeradius Art.-Nr. Art.-Nr. VE*ungeschlitzt ungeschlitzt Ring

mm mm mm schwarz grau RAL 7031 mNW I-Ø A-Ø Bending radius Art. no. Art. no. PU*

unslit unslit ringmm mm mm black grey RAL 7031 m

Flammhemmend gemäß UL 94 / Flame retardant acc. to UL 94

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 9: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Wellschlauch PA 6 Normalprofil

Material:Polyamid 6Obere Gebrauchstemperatur:kurzzeitig (240 h): 150°CKennzeichen:• parallel gewelltEigenschaften:• nicht flammausbreitend nach

FMVSS 302• halogenfrei• trittfest• UV-Beständigkeit nach

DIN EN ISO 8580

PA 6120°

–-40°

Corrugated tube PA 6Normal Profile

7,5 6,7 10,0 13 1206079 1203070 508,5 8,4 11,7 15 1206085 1203089 50

10 9,9 13,0 20 1206109 1203100 5012 12,2 15,7 30 1206125 1203126 5013 12,7 15,8 35 1206130 1203134 5014 14,2 18,5 40 1206140 1203142 5016 15,0 18,9 45 1206160 - 5017 16,6 21,2 45 1206176 1203177 5019 19,3 24,3 50 1206190 - 5022 21,3 25,4 50 1206220 1203223 5023 23,2 28,3 55 1206230 1203231 5026 25,8 31,2 60 1206260 - 2529 29,0 34,5 65 1206290 1203290 2537 36,0 42,4 90 1206370 1203371 2550 47,7 54,0 100 1206508 1203509 25

*) Auch als 10 m Ring und in Container-Verpackungseinheit lieferbar

Passende Schlauchverschraubungen:SEM-Quick, Seite 14-19SEM, Seite 24-25SEM-Kombi, Seite 26NH, Seite 28-31

Anwendungsbereiche:• z.B. im Motorraum, Karosserie und

Fahrzeuginnenraum, Maschinen,Apparate, Geräte, Schiffs- und Bahnbau, Schaltschränke undbewegliche Maschinenteile

Material:Polyamide 6Upper temperature range:short-term: 150°CCharacteristics:• parallel corrugatedFeatures:• non flame-extending acc. to

FMVSS 302• free of halogen• durable• UV resistance acc. to

DIN EN ISO 8580

Applications:• e.g. engine compartment, car body

and interior, machines, instruments,devices, ship and train building,switch cabinet and movable machi-ne parts.

*) also available as a 10 meter ring and as container package unit.

Suitable conduit glands:SEM-Quick, page 14-19SEM, page 24-25SEM-Kombi, page 26NH, page 28-31

7

NW I-Ø A-Ø Biegeradius Art.-Nr. Art.-Nr. VE*ungeschlitzt ungeschlitzt Ring

mm mm mm schwarz grau RAL 7031 mNW I-Ø A-Ø Bending radius Art. no. Art. no. PU*

unslit unslit ringmm mm mm black grey RAL 7031 m

Nicht flammausbreitend gemäß UL 94 / Non flame-extending acc. to UL 94

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 10: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Corrugated tube PA 6„light“

Material:Polyamide 6Characteristics:• parallel corrugatedFeatures:• flame retardant • free of halogen• smaller bending radius• flexible• Permanent vibrations as per

DIN 53442• UV resistance acc. to

DIN EN ISO 8580

Applications:• machines, instruments, devices,

switch cabinet and movable machi-ne parts.

NW I-Ø A-Ø Biegeradius Art.-Nr. VE*ungeschlitzt Ring

mm mm mm schwarz mNW I-Ø A-Ø Bending radius Art. no. PU*

unslit ringmm mm mm black m

Wellschlauch PA 6„leicht“

Material:Polyamid 6Kennzeichen:• parallel gewelltEigenschaften:• flammhemmend• halogenfrei• kleiner Biegeradius• höhere Flexibilität• Dauerschwingverhalten

nach DIN 53442• UV-Beständigkeit nach

DIN EN ISO 8580

PA 6120°

–-40°

7,5 6,9 10,0 11 1212079 508,5 8,7 11,5 13 1212850 5010 10,2 13,0 18 1212109 5012 12,5 15,7 26 1212125 5013 13,0 16,0 32 1212133 5014 14,5 18,5 36 1212141 5017 17,0 21,2 40 1212176 5019 19,5 24,3 42 1212192 5022 21,6 25,6 45 1212222 5023 23,5 28,4 50 1212230 5026 26,1 31,2 54 1212260 2529 29,4 34,5 58 1212290 2537 36,7 42,2 80 1212370 2550 48,1 54,0 90 1212508 25

*) Auch in Container-Verpackungseinheit lieferbar

Passende Schlauchverschraubungen: (Bedingt einsetzbar, da Schlauch nicht ausreißfest)SEM-Quick, Seite 14-19SEM, Seite 24-25SEM-Kombi, Seite 26NH, Seite 28-31

Anwendungsbereiche:• Maschinen, Apparate, Geräte,

Schaltschränke und beweglicheMaschinenteile

*) also available in container package unit.

Suitable conduit glands: (only partially usable because conduit is not tear-resistant)SEM-Quick, page 14-19SEM, page 24-25SEM-Kombi, page 26NH, page 28-31

8

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 11: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Corrugated tube PA 6„heavy“

Material:Polyamide 6Upper temperature range:short-term (240 h); 150°CCharacteristics:• parallel corrugatedFeatures:• flame retardant, combustion speed

<100 mm/min• UV resistance acc.

to DIN EN ISO 8580• free of halogen

• thicker tube material• strong durability and impact resi-

stanceApplications:• machines, instruments, devices,

switch cabinet and heavy dutymachines

NW I-Ø A-Ø Biegeradius Art.-Nr. VEungeschlitzt Ring

mm mm mm schwarz mNW I-Ø A-Ø Bending radius Art. no. PU

unslit ringmm mm mm black m

Wellschlauch PA 6„schwer“

Material:Polyamid 6Obere Gebrauchstemperatur:kurzzeitig (240 h): 150°CKennzeichen:• parallel gewelltEigenschaften:• flammhemmend, Brenngeschwin-

digkeit <100 mm/min• UV-Beständigkeit nach

DIN EN ISO 8580• halogenfrei

8,5 8,2 11,7 15 1214089 5010 9,6 13,0 20 1214100 5012 12,1 15,7 30 1214127 5014 13,7 18,5 30 1214143 5017 16,2 21,2 35 1214178 5023 22,7 28,3 45 1214235 5023G* 21,3 28,3 40 1214236 5029 28,4 34,5 65 1214291 2529G* 26,9 34,5 45 1214292 2537 35,5 42,0 90 1214375 2537G* 35,3 42,5 60 1214376 2550 47,8 54,0 130 1214502 25

*) grobes Profil

Passende Schlauchverschraubungen:SEM-Quick, Seite 14-19SEM, Seite 24-25SEM-Kombi, Seite 26NH, Seite 28-31

• höhere Wandstärke• hohe Schlag- und TrittfestigkeitAnwendungsbereiche:• Maschinen-, Apparate-, Geräte-,

Schwermaschinenbau

*) rough profile

Suitable conduit glands:SEM-Quick, page 14-19SEM, page 24-25SEM-Kombi, page 26NH, page 28-31

PA 6120°

–-40°

9

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 12: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Corrugated tube PA 12Normal profile

Material:Polyamide 12Upper temperature range:short-term (240 h); 130°CLower temperature range:short-term (240 h); -50°CCharacteristics:• parallel corrugatedFeatures:• self-extinghuishing FMVSS 302 C • free of halogen• free of phosphor• low water absorption• guaranteed accurate to gauge

• mechanical properties are not influenced by surrounding temperature

• highly endurable• highly bendable• UV-resistantApplications:• e.g. engine compartment, car body

and interior, home appliance industry, heating and airconditioninginstallations, robotics, electricalindustry especially applicable foruse at low temperatures.

NW I-Ø A-Ø Biegeradius Art.-Nr. Art.-Nr. VEungeschlitzt ungeschlitzt Ring

mm mm mm schwarz grau mNW I-Ø A-Ø Bending radius Art. no. Art. no. PU

unslit unslit ringmm mm mm black black m

Wellschlauch PA 12 Normalprofil

Material:Polyamid 12Obere Gebrauchstemperatur:kurzzeitig (240 h): 130°CUntere Gebrauchstemperatur:kurzzeitig (240 h): -50°CKennzeichen:• parallel gewelltEigenschaften:• selbstverlöschend FMVSS 302 C• halogenfrei• phosphorfrei• geringe Wasseraufnahme• garantiert hohe Maßhaltigkeit

PA 12

7,5 6,9 10,0 13 1240607 1240072 508,5 8,4 11,7 12 1240608 1240080 5010 9,9 13,0 15 1240610 1240102 5012 12,2 15,7 22 1240612 1240129 5013 12,7 15,8 25 1240613 1240137 5014 14,2 18,5 30 1240614 1240145 5017 16,6 21,2 27 1240617 1240170 5022 21,3 25,4 50 1240622 1240226 5023 23,2 28,3 45 1240623 1240234 5029 29,0 34,5 50 1240629 1240293 2537 36,0 42,4 80 1240637 1240374 2550 47,7 54,0 100 1240650 1240501 25

Passende Schlauchverschraubungen:SEM-Quick, Seite 14-19SEM, Seite 24-25SEM-Kombi, Seite 26NH, Seite 28-31

• mechanische Eigenschaften werdenvon Umgebungstemperatur nichtbeeinflusst

• besondere Zähigkeit• besondere Biegsamkeit• UV-beständigAnwendungsbereiche:• z.B. im Motorraum, Karosserie und

Fahrzeuginnenraum, Hausgeräte-industrie, Heiz- und Klimatechnik,Roboter, Elektroindustrie, beson-ders auch für den Einsatz bei tiefenTemperaturen geeignet

§100°

–-40°

Suitable conduit glands:SEM-Quick, page 14-19SEM, page 24-25SEM-Kombi, page 26NH, page 28-31

10

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 13: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Corrugated tube PPNormal profile

Material:PolypropyleneUpper temperature range:short-term (350 h): 135°CCharacteristics:• parallel corrugatedFeatures:• acid-proof• no water absorption• guaranteed accurante to gauge• high structural heat-resistance

• high cold impact strength• very flexibleApplications:• e.g. engine compartment, car body

and interior, home appliance industry, heating and airconditioninginstallations, electrical industry,ship and train building

NW I-Ø A-Ø Biegeradius Art.-Nr. Art.-Nr. VE*ungeschlitzt geschlitzt Ring

mm mm mm schwarz schwarz mNW I-Ø A-Ø Bending radius Art. no. Art. no. PU*

unslit slit ringmm mm mm black black m

Wellschlauch PP Normalprofil

Material:PolypropylenObere Gebrauchstemperatur:kurzzeitig (350 h): 135°CKennzeichen:• parallel gewelltEigenschaften:• säurebeständig• nimmt keine Feuchte auf• absolute Maßhaltigkeit• hohe Wärmeformbeständigkeit• sehr gutes Biegewechselverhalten

PP105°

–-40°

4,5 5,0 7,1 12 1926604 1926654 1006 6,0 9,2 10 1926606 1926656 1007,5 6,9 9,9 15 1926607 1926657 508,5 8,5 11,6 18 1926608 1926658 5010 10,1 12,7 18 1926610 1926660 5012 12,0 15,6 20 1926612 1926662 5013 12,9 15,8 22 1926613 1926663 5014 14,5 18,3 25 1926614 1926664 5016 15,2 18,8 25 1926616 1926666 5017 16,8 21,0 30 1926617 1926667 5019 19,4 24,0 35 1926619 1926669 5022 21,8 25,5 37 1926622 1926672 5023 23,7 28,0 42 1926623 1926673 5026 26,4 31,3 47 1926626 1926676 2529 29,3 33,9 60 1926629 1926679 2537 36,7 42,0 70 1926637 1926687 2550 47,8 53,6 130 1926650 1926690 25

*) Auch in Container-Verpackungseinheit lieferbar

Passende Schlauchverschraubungen:SEM-Quick, Seite 14-19SEM, Seite 24-25SEM-Kombi, Seite 26NH, Seite 28-31

• hohe Kälteschlagzähigkeit• sehr flexibelAnwendungsbereiche:• z.B. im Motorraum, Karosserie und

Fahrzeuginnenraum, Hausgeräte-industrie, Heiz- und Klimatechnik,Elektroindustrie, Schiffs- und Bahn-bau

*) also available in container package unit

Suitable conduit glands:SEM-Quick, page 14-19SEM, page 24-25SEM-Kombi, page 26NH, page 28-31

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

11

Page 14: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

NW I-Ø A-Ø Biegeradius Art.-Nr. Art.-Nr. VE*ungeschlitzt geschlitzt Ring

mm mm mm schwarz schwarz mNW I-Ø A-Ø Bending radius Art. no. Art. no. PU*

unslit slit ringmm mm mm black black m

WellschlauchPPmodNormalprofil

Material:modifiziertes PolypropylenObere Gebrauchstemperatur:kurzzeitig (500 h): 150°CKennzeichen:• parallel gewelltEigenschaften:• selbstverlöschend nach FMVSS 302 • säurebeständig• hohe Temperaturbeständigkeit

bis +135°C• sehr flexibel• nimmt keine Feuchte auf• absolute Maßhaltigkeit

PPmod

135°–

-40°

3 2,8 5,1 4,5 1926003 1926303 2004,5 5,0 7,1 12 1926004 1926304 1006 6,0 9,2 10 1926006 1926306 1007,5 6,9 9,9 15 1926007 1926307 508,5 8,5 11,6 18 1926008 1926308 5010 10,1 12,7 18 1926100 1926310 5012 12,0 15,6 20 1926120 1926312 5013 12,9 15,8 22 1926130 1926313 5014 14,5 18,3 25 1926140 1926314 5016 15,2 18,8 25 1926160 1926316 5017 16,8 21,0 30 1926170 1926317 5019 19,4 24,0 35 1926190 1926319 5022 21,8 25,5 37 1926220 1926322 5023 23,7 28,0 42 1926223 1926323 5026 26,4 31,3 47 1926226 1926326 2529 29,3 33,9 60 1926229 1926329 2537 36,7 42,0 70 1926237 1926337 2550 47,8 53,6 130 1926250 1926350 25

*) Auch in Container-Verpackungseinheit lieferbar

Passende Schlauchverschraubungen:SEM-Quick, Seite 14-19SEM, Seite 24-25SEM-Kombi, Seite 26NH, Seite 28-31

• hohe Wärmeformbeständigkeit• sehr gutes Biegewechselverhalten• hohe KälteschlagzähigkeitAnwendungsbereiche:• z.B. Motorraum, Karosserie,

Fahrzeuginnenraum, Maschinenbau,Hausgeräteindustrie, Heiz- und Klimatechnik, Elektroindustrie,Schiffs- und Bahnbau

§

Corrugated tubePPmodNormal profile

Material:modified PolypropyleneUpper temperature range:short-term (500 h): 150°CCharacteristics:• parallel corrugatedFeatures:• self-extinghuishing according to

FMVSS 302 C• acid-proof• high temperature resistance up to

+135°C• very flexible• no water absorption

• absolutely dimensionally accurate• high structure heat-resistance• excellent elasticity• high cold impact strengthApplications:• e.g. engine compartment, car body

and interior, machining industry,home appliance industry, heatingand air-conditioning installations, electrical industry, ship and trainbuilding

*) also available in container package unit

Suitable conduit glands:SEM-Quick, page 14-19SEM, page 24-25SEM-Kombi, page 26NH, page 28-31

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

12

Page 15: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Corrugated tubePPmodLockable AHW profile

NW I-Ø A-Ø Biegeradius Art.-Nr. VEverschließbar Ring

mm mm mm schwarz mNW I-Ø A-Ø Bending radius Art. no. PU

lockable ringmm mm mm black m

WellschlauchPPmodverschließbar AHW-Profil

Material:modifiziertes PolypropylenObere Gebrauchstemperatur:kurzzeitig (500 h): 150°CKennzeichen:• parallel gewelltEigenschaften:• Brandverhalten nach FMVSS 302,

selbstverlöschend Typ B• Brennrate 0 nach DIN 75200• prozeßsicheres Verschließen nur

mit System-Verschließwerkzeug

8,5 8,6 12,8 47 1940008 5011 11,2 15,7 50 1940011 5013 12,2 18,3 50 1940013 5015 14,9 21,3 55 1940015 5019 19,0 25,6 65 1940019 5026 24,6 31,5 70 1940026 25

Montagewerkzeuge/Mounting toolsAufziehwerkzeug/Opening toolfür NW Art.-Nr. VEfor NW Art. no. PU8,5 9001557 111 9001560 113 9001551 115 9001566 119 9001554 126 9001563 1

Schließwerkzeug/Closing toolfür NW Art.-Nr. VEfor NW Art. no. PU8,5 9001558 111 9001561 113 9001552 115 9001567 119 9001555 126 9001564 1

Montagewerkzeuge auf Anfrage / Mounting tools on request

• UV-Beständigkeit nach DIN EN ISO 8580

• säurebeständig• nachträgliches Einlegen von Kabeln

möglichAnwendungsbereiche:• z.B. Motorraum, Karosserie,

Fahrzeuginnenraum, Maschinenbau,Hausgeräteindustrie, Heiz- und Klimatechnik, Elektroindustrie,Schiffs- und Bahnbau

PPmod

135°–

-40°

Material:modified PolypropyleneUpper temperature range:short-term (500 h): 150°CCharacteristics:• parallel corrugatedFeatures:• Burning behaviour accd. to FMVSS

302, selfextinguishing Type B• Burning rate 0 accd. DIN 75200• Safe locking process only by using

special systemised mounting tool

• UV resistance accd. to DIN EN ISO 8580

• acid-proof• cables can be subsequently installedApplications:• e.g. engine compartment, car body

and interior, machining industry,home appliance industry, heating and air-conditioning installations,electrical industry, ship and train building

§

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

13

Page 16: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

SEM Quick Glandstraight

SEM QuickVerschraubunggerade

IP 65-

IP 67

Material:Polyamid 6, V0 nach UL 94UL und CSA gelistetKennzeichen:• Einteilige Kunststoff-Verschraubung Eigenschaften:• schwer entflammbar• halogenfrei• montagefreundlich• IP 65 ohne Dichtung• IP 66 mit Innendichtung• IP 66 mit Außendichtung• IP 67 mit Innen- und Außen-

dichtung

110°–

-40°

metrisches Gewinde/metric threadGewinde für NW GL DI DS L SW Art.-Nr. Art.-Nr. VE

mm mm mm mm mm tiefschwarz grau ähnl. Stck.RAL 9005 RAL 7031

Thread for NW GL DI DS L SW Art. no. Art. no. PUmm mm mm mm mm jet black grey similar pcs.

RAL 9005 to RAL 7031

Kunststoffaußengewinde/Plastic external threadM 10 x 1,0 NW 7,5 9,0 7,0 10,0 26,5 14 3806110 3806510 50M 12 x 1,5 NW 8,5 9,0 8,0 11,0 28,0 16 3806111 50M 12 x 1,5 NW 10 9,0 8,0 13,0 30,0 19 3806112 3806512 50M 16 x 1,5 NW 10 9,0 11,0 13,0 29,5 19 3806116 3806516 50M 16 x 1,5 NW 12 9,0 12,0 15,7 31,0 21 3806117 3806517 50M 20 x 1,5 NW 17 13,0 16,0 21,2 39,0 27 3806120 3806520 50M 25 x 1,5 NW 23 14,0 20,5 28,5 43,5 36 3806125 3806525 50M 32 x 1,5 NW 29 14,0 26,8 34,5 46,5 40 3806132 3806532 25M 40 x 1,5 NW 37 15,0 34,0 42,1 53,5 50 3806140 3806540 25M 50 x 1,5 NW 50 15,0 42,5 54,4 58,0 65 3806145 3806545 10M 63 x 1,5 NW 50 15,0 50,0 61,2 60,5 65 3806163 3806563 a. Anfr./on request

Metallaußengewinde/Metal external threadM 12 x 1,5 NW 10 9,0 7,5 13,0 30,0 19 3807012 3807112 50M 16 x 1,5 NW 12 9,0 10,0 15,7 31,0 21 3807016 3807116 50M 20 x 1,5 NW 17 13,0 15,0 21,2 39,0 27 3807020 3807120 50M 25 x 1,5 NW 23 14,0 19,5 28,5 43,5 36 3807025 3807125 25M 32 x 1,5 NW 29 14,0 25,5 34,5 46,5 40 3807032 3807132 25M 40 x 1,5 NW 37 15,0 33,0 42,1 53,5 50 3807040 3807140 10M 50 x 1,5 NW 50 15,0 41,0 54,4 58,0 65 3807050 3807150 10

PA 6

Anwendungsbereiche:• für parallelgewellte Wellschläuche• Maschinen- u. Anlagenbau• Roboterbau• Kraftfahrzeug- u. Schiffsbau• BahntechnikHinweis:Je VE incl. 1 gelben Sicherheitsöffner

Material:Polyamide 6, V0 accord. to UL 94 UL and CSA listedCharacteristics:• One-piece plastic gland Features:• flammable with difficulty• free of halogen• easy mounting• IP 65 without sealing• IP 66 with inner sealing• IP 66 with outer sealing• IP 67 with inner and outer sealing

Applications:• for parallel corrugated tubes• mechanical engineering and facility

constructions• robotics engineering• automotive and shipbuilding

industry• railway engineeringNote:every package unit incl. 1 yellowsafety opener

14

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Passende Dichtungen Seite 20 Suitable Sealings page 20

Page 17: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

SEM Quick Gland45°-Angle

SEM Quick Verschraubung45°-Winkel

IP 65-

IP 67

Material:Polyamid 6, V0 nach UL 94UL und CSA gelistetKennzeichen:• Einteilige Kunststoff-Winkel-

verschraubungEigenschaften:• schwer entflammbar• halogenfrei• montagefreundlich• IP 65 ohne Dichtung• IP 66 mit Innendichtung• IP 66 mit Außendichtung• IP 67 mit Innen- und Außen-

dichtung

110°–

-40°

metrisches Gewinde/metric threadGewinde für NW GL DI DS L SW Art.-Nr. Art.-Nr. VE

mm mm mm mm mm tiefschwarz grau ähnl. Stck.RAL 9005 RAL 7031

Thread for NW GL DI DS L SW Art. no. Art. no. PUmm mm mm mm mm jet black grey similar pcs.

RAL 9005 to RAL 7031

Kunststoff-Außengewinde/Plastic external threadM 25 x 1,5 NW 23 14,0 21,0 28,5 75,0 36 7321155 7321555 50M 32 x 1,5 NW 29 14,0 27,0 34,5 86,0 40 7321160 7321560 25M 40 x 1,5 NW 37 15,0 34,5 42,1 102,0 50 7321165 7321565 25M 50 x 1,5 NW 50 15,0 44,5 54,4 111,0 65 7321170 7321570 10

Metall-Außengewinde/Metal external threadM 25 x 1,5 NW 23 14,0 21,0 28,5 75,0 36 7321725 7321825 50M 32 x 1,5 NW 29 14,0 27,0 34,5 86,0 40 7321732 7321832 50M 40 x 1,5 NW 37 15,0 34,5 42,1 102,0 50 7321740 7321840 25M 50 x 1,5 NW 50 15,0 44,5 54,4 111,0 65 7321750 7321850 25

PA 6

Anwendungsbereiche:• für parallelgewellte Wellschläuche• Maschinen- u. Anlagenbau• Roboterbau• Kraftfahrzeug- u. Schiffsbau• BahntechnikHinweis:Je VE incl. 1 gelben Sicherheitsöffner

Material:Polyamide 6, V0 accord. to UL 94 UL and CSA listedCharacteristics:• One-piece plastic angle-gland Features:• flammable with difficulty• free of halogen• easy mounting• IP 65 without sealing• IP 66 with inner sealing• IP 66 with outer sealing• IP 67 with inner and outer sealing

Applications:• for parallel corrugated tubes• mechanical engineering and facility

constructions• robotics engineering• automotive and shipbuilding

industry• railway engineeringNote:every package unit incl. 1 yellowsafety opener

15

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Passende Dichtungen Seite 20 Suitable Sealings page 20

Page 18: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

SEM Quick Gland90°-Angle

SEM Quick Verschraubung90°-Winkel

IP 65-

IP 67

Material:Polyamid 6, V0 nach UL 94UL und CSA gelistetKennzeichen:• Einteilige Kunststoff-Winkel-

verschraubungEigenschaften:• schwer entflammbar• halogenfrei• montagefreundlich• IP 65 ohne Dichtung• IP 66 mit Innendichtung• IP 66 mit Außendichtung• IP 67 mit Innen- und Außen-

dichtung

110°–

-40°

metrisches Gewinde/metric threadGewinde für NW GL DI DS H L SW Art.-Nr. Art.-Nr. VE

mm mm mm mm mm mm tiefschwarz grau ähnl. Stck.RAL 9005 RAL 7031

Thread for NW GL DI DS H L SW Art. no. Art. no. PUmm mm mm mm mm mm jet black grey similar pcs.

RAL 9005 to RAL 7031

Kunststoff-Außengewinde/Plastic external threadM 12 x 1,5 NW 10 9,0 8,5 13,0 26,8 44,0 19 7320212 7320612 50M 16 x 1,5 NW 10 9,0 10,5 13,0 26,8 44,0 19 7320216 7320616 50M 16 x 1,5 NW 12 8,0 12,0 15,7 29,9 49,6 21 7320217 7320617 50M 20 x 1,5 NW 17 10,5 16,0 21,2 35,4 58,4 27 7320220 7320620 50M 25 x 1,5 NW 23 14,5 21,0 28,5 44,6 76,8 36 7320225 7320625 50M 32 x 1,5 NW 29 14,0 27,0 34,5 52,0 87,6 40 7320232 7320632 25M 40 x 1,5 NW 37 15,0 34,5 42,1 67,0 102,6 50 7320240 7320640 25M 50 x 1,5 NW 50 16,0 44,0 54,4 82,0 125,0 65 7320245 7320645 10M 63 x 1,5 NW 50 15,0 45,0 61,2 125,0 65 7320263 7320663 a.Anfr./on req.

Metall-Außengewinde/Metal external threadM 12 x 1,5 NW 10 9,0 8,5 13,0 26,8 44,0 19 7320712 7320812 50M 16 x 1,5 NW 12 8,0 12,0 15,7 29,9 49,6 21 7320716 7320816 50M 20 x 1,5 NW 17 10,5 16,0 21,2 35,4 58,4 27 7320720 7320820 50M 25 x 1,5 NW 23 14,5 21,0 28,5 44,6 76,8 36 7320725 7320825 50M 32 x 1,5 NW 29 14,0 27,0 34,5 52,0 87,6 40 7320732 7320832 25M 40 x 1,5 NW 37 15,0 34,5 42,1 67,0 102,6 50 7320740 7320840 25M 50 x 1,5 NW 50 16,0 44,0 54,4 82,0 125,0 65 7320750 7320850 10

PA 6

Anwendungsbereiche:• für parallelgewellte Wellschläuche• Maschinen- u. Anlagenbau• Roboterbau• Kraftfahrzeug- u. Schiffsbau• BahntechnikHinweis:Je VE incl. 1 gelben Sicherheitsöffner

Material:Polyamide 6, V0 accord. to UL 94 UL and CSA listedCharacteristics:• One-piece plastic angle-gland Features:• flammable with difficulty• free of halogen• easy mounting• IP 65 without sealing• IP 66 with inner sealing• IP 66 with outer sealing• IP 67 with inner and outer sealing

Applications:• for parallel corrugated tubes• mechanical engineering and facility

constructions• robotics engineering• automotive and shipbuilding

industry• railway engineeringNote:every package unit incl. 1 yellowsafety opener

16

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Passende Dichtungen Seite 20 Suitable Sealings page 20

Page 19: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

SEM Quick/SEM Quick

IP 65-

IP 67

Material:Polyamid 6, V0 nach UL 94UL und CSA gelistetKennzeichen:• Kunststoff-Winkelflansch-

verschraubungEigenschaften:• schwer entflammbar• halogenfrei• montagefreundlich• IP 65 ohne Dichtung• IP 66 mit Innendichtung• IP 66 mit Außendichtung• IP 67 mit Innen- und Außen-

dichtung

110°–

-40°

Flansch-Verschraubung 90°-Winkel /Flange-Gland 90°-AngleAbmessung für NW A B C D E H L DI Art.-Nr. Art.-Nr. VE

mm mm mm mm mm mm mm mm tief- grau Stck.schwarz ähnl.RAL 9005 RAL 7031

Measures for NW A B C D E H L DI Art. no. Art. no. PUmm mm mm mm mm mm mm mm jet black grey pcs.

RAL 9005 similar toRAL 7031

PG 16 17 36,0 - 45,8 28,7 5,5 38,7 58,2 16,5 7322016 7322116 50PG 21 23 52,0 - 63,0 38,5 6,6 49,5 76,8 23,0 7322021 7322121 50PG 29 29 54,0 36,0 67,0 55,0 6,6 58,4 92,5 27,0 7322029 7322129 25PG 36 37 73,0 30,0 86,0 52,5 6,6 72,5 102,6 39,0 7322036 7322136 25PG 48 50 73,0 30,0 86,0 68,0 6,6 125,0 125,0 48,5 7322048 7322148 10

PA 6

Anwendungsbereiche:• für parallelgewellte Wellschläuche• Maschinen- u. Anlagenbau• Roboterbau• Kraftfahrzeug- u. Schiffsbau• BahntechnikHinweis:Je VE incl. 1 gelben Sicherheitsöffner

Material:Polyamide 6, V0 accord. to UL 94 UL and CSA listedCharacteristics:• Plastic angle flange gland Features:• flammable with difficulty• free of halogen• easy mounting• IP 65 without sealing• IP 66 with inner sealing• IP 66 with outer sealing• IP 67 with inner and outer sealing

Applications:• for parallel corrugated tubes• mechanical engineering and facility

constructions• robotics engineering• automotive and shipbuilding

industry• railway engineeringNote:every package unit incl. 1 yellowsafety opener

17

passend für für NW Bohrungs-Durchmesser Art.-Nr. Art.-Nr. VEmm tiefschwarz grau Stck.

RAL 9005 ähnl. RAL 7031suitable for for NW drill hole diameter Art. no. Art. no. PU

mm jet black grey pcs.RAL 9005 similar to RAL 7031

M 12 x 1,5 7,5 12,5 3808012 3808112 50M 16 x 1,5 10 16,5 3808016 3808116 50M 20 x 1,5 12 20,5 3808020 3808120 50M 25 x 1,5 17 25,5 3808025 3808125 50M 32 x 1,5 23 32,5 3808032 3808132 25M 40 x 1,5 29 40,5 3808040 3808140 25M 50 x 1,5 37 50,5 3808050 3808150 10

Hollow-sectionclamping gland straightFastening without locknut and interior threadFastening clamp, page 23

Hohlraum-KlemmverschraubunggeradeBefestigung ohne Gegenmutter undInnengewindeBefestigungszange, Seite 23

IP 65-

IP 67

110°–

-40°PA 6

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Passende Dichtungen Seite 20 Suitable Sealings page 20

Page 20: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

SEM QuickCombi-gland

SEM QuickKombi-Verschraubung

IP 65-

IP 67

Material:Polyamid 6, V0 nach UL 94UL und CSA gelistetKennzeichen:• metrisches Gewinde• Zweiteilige

Kunststoffverschraubung• Zugentlastung durch

KlemmlamellenEigenschaften:• schwer entflammbar• halogenfrei• montagefreundlich• IP 65 ohne Dichtung• IP 66 mit Innendichtung• IP 66 mit Außendichtung• IP 67 mit Innen- und Außen-

dichtung

110°–

-40°

metrisches Gewinde/metric threadGewinde für NW Kemmbereich E SW 1 SW 2 Art.-Nr. VE

mm mm mm mm tiefschwarz Stck.RAL 9005

Thread for NW Clamping range E SW 1 SW 2 Art. no. PUmm mm mm mm jet black pcs.

RAL 9005

M 16 x 1,5/ 9 NW 10 2,5 - 8 10 19 19 5512016 50M 16 x 1,5/11 NW 12 3,5 - 10 10 22 21 5512017 50M 20 x 1,5/13 NW 17 5 - 12 10 24 27 5512020 50M 20 x 1,5/16 NW 17 7 - 14 10 27 27 5512021 50M 25 x 1,5/16 NW 17 7 - 14 10 27 27 5512025 50M 25 x 1,5/21 NW 23 9 - 18 10 33 36 5512026 25M 32 x 1,5 NW 29 16 - 25 10 42 40 5512032 20

PA 6

Anwendungsbereiche:• Maschinen- u. Anlagenbau• Roboterbau• Kraftfahrzeug- u. Schiffsbau• BahntechnikHinweis:Je VE incl. 1 gelben Sicherheitsöffner

Material:Polyamide 6, V0 accord. to UL 94 UL and CSA listedCharacteristics:• metric thread• two-part plastic gland• traction-relief through clamping

lamellaFeatures:• flammable with difficulty• free of halogen• easy mounting• IP 65 without sealing• IP 66 with inner sealing• IP 66 with outer sealing• IP 67 with inner and outer sealing

Applications:• mechanical engineering and facility

constructions• robotics engineering• automotive and shipbuilding

industry• railway engineeringNote:every package unit incl. 1 yellowsafety opener

18

grau auf Anfrage / grey on request

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Passende Dichtungen Seite 20 Suitable Sealings page 20

Page 21: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

SEM QuickEMC-Combi-gland

SEM QuickEMV-Kombi-Verschraubung

IP 65

Material:Polyamid 6, V0 nach UL 94UL und CSA gelistetKennzeichen:• Einteilige Wellschlauch-EMV-

Kabelverschraubung aus Metall mit metrischem Gewinde

• Mit innenliegender ZugentlastungEigenschaften:• schwer entflammbar• Befestigung ohne Gegenmutter

und InnengewindeAnwendungsbereiche:• für Kabel mit Schirmung, Zugentla-

stung oder wenn mit Hilfe einesAbschirmgeflechtschlauchs beideVerschraubungsseiten miteinanderkontaktiert werden müssen

• für parallelgewellte Wellschläuche• Maschinen- u. Anlagenbau• Roboterbau• Kraftfahrzeugbau• Bahntechnik

110°–

-40°

metrisches Gewinde/metric threadGewinde für NW Kemmbereich E SW 1 SW 2 Art.-Nr. Art.-Nr. VE

mm mm mm mm tiefschwarz grau Stck.RAL 9005 ähnl. RAL 7031

Thread for NW Clamping range E SW 1 SW 2 Art. no. Art. no. PUmm mm mm mm jet black grey similar pcs.

RAL 9005 to RAL 7031

M 16 x 1,5 12 5,5 - 10 5,0 17 19 5512816 5512916 25M 20 x 1,5 17 8 - 13 6,0 22 27 5512820 5512920 10M 25 x 1,5 23 11 - 18 7,0 30 36 5512825 5512925 10M 32 x 1,5 29 15 - 21 8,0 34 40 5512832 5512932 10

PA 6

Montagehinweise:• einfache Montage:

Kabelschirmung wird mit demKunststoffeinsatz auf den Bodender Verschraubung gedrückt.

• Der Kunststoffeinsatz zwischen der Hutmutter und dem Zwischen-stutzen erzeugt rundum einen dauerhaften formschlüssigenDruck, der das Drahtgeflechtanpresst und auch Korrosion weitgehend verhindert.

Hinweis:Je VE incl. 1 gelben Sicherheitsöffner

Material:Polyamide 6, V0 accord. to UL 94 UL and CSA listedCharacteristics:• One-part corrugated tube & EMC

cable gland with metric thread• with interior traction reliefFeatures:• flammable with difficulty• Fastening without locknut and

interior threadApplications:• for screened cables, traction

relief or if both sides of the glandsmust be connected with assistanceof a mesh-screened tube „Braiding“

• for parallel corrugated tubes • mechanical engineering and

facility constructions • robotics engineering• automotive industry• railway engineering

Mounting Instructions:• easy mounting:

cable screen is pressed against thebottom of the gland through theplastic insert

• The plastic insert between the capnut and the intermediate part generates a circumference perma-nent form-locking pressure whichpresses the mesh wire and is mostly resistant to corrosion.

Note:every package unit incl. 1 yellowsafety opener

19

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 22: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Sealingsfor SEM Quick

Dichtungenfür SEM Quick

Material:ThermoplastischesPolyurethan-Elastomer PURKennzeichen:• geeignet gegen Feuchtigkeit,

Eindringen von Staub, SpritzschutzEigenschaften:• beständig gegen eine Vielzahl von

Ölen, Lösungsmitteln und Chemikalien

110°–

-40°

Typ passend für Art.-Nr. Art.-Nr. VENW tiefschwarz grau Stck.

RAL 9005 ähnl. RAL 7031Type suitable for Art. no. Art. no. PU

NW jet black grey pcs.RAL 9005 similar to RAL 7031

AD 07 7,5 8121107 8121207 50AD 09 10 8121109 8121209 50AD 11 12 8121111 8121211 50AD 16 17 8121116 8121216 50AD 21 23 8121121 8121221 50AD 29 29 8121129 8121229 25AD 36 37 8121136 8121236 25AD 48 50 8121148 8121248 10

PUR

Anwendungsbereiche:• Maschinen- u. Anlagenbau• Apparatebau• Kraftfahrzeug- u. Schiffsbau• Automatisierungstechnik• Bahntechnik

Material:ThermoplasticPolyurethan-Elastomere PURCharacteristics:• suitable against moisture and

dust penetration, splash-proofFeatures:• resistant against many oils,

solutions and chemicals

Applications:• mechanical engineering and device

constructions• robotics engineering• automotive and shipbuilding

industry• railway engineering

Außendichtungen/Outer Sealing

Typ passend für Art.-Nr. VENW weiß Stck.

Type suitable for Art. no. PUNW white pcs.

ID 07 7,5 8122007 50ID 09 10 8122009 50ID 11 12 8122011 50ID 16 17 8122016 50ID 21 23 8122021 50ID 29 29 8122029 25ID 36 37 8122036 25ID 48 50 8122048 10

Innendichtungen/Inner Sealing

20

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 23: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Corrugated tube holder

Wellschlauchhalter

Material:Polyamid 6, V0 nach UL 94Kennzeichen:• anreihbar• stapelbar• für schnelle, einfache,

sichere Montage• Rippenfixierung zur Zugentlastung• Wellschlauch im Halter um die

eigene Achse drehbar

110°–

-40°

Typ für NW Breite Höhe Höhe Länge Befestigungs Ø Art.-Nr. Art.-Nr. VEmm mm mit Deckel mm mm tiefschwarz grau ähnl. Stck.

RAL 9005 RAL 7031Type for NW Widths Hight Hight Lengths Mounting Ø Art. no. Art. no. PU

mm mm with cap mm mm jet black grey similar pcs.RAL 9005 to RAL 7031

WLH-07 7,5 18,0 28,0 30,0 26,0 4,5 8221007 8221107 50WLH-09 10 18,0 28,0 30,0 26,0 4,5 8221009 8221109 50WLH-11 12 18,0 28,0 30,0 26,0 5,5 8221011 8221111 50WLH-16 17 18,0 28,0 36,0 30,0 6,5 8221016 8221116 50WLH-21 23 18,0 28,0 44,0 38,0 6,5 8221021 8221121 50WLH-29 29 18,0 28,0 50,0 46,0 6,5 8221029 8221129 50WLH-36 37 18,0 28,0 60,0 57,0 6,5 8221036 8221136 50WLH-48 50 18,0 28,0 72,0 68,0 6,5 8221048 8221148 50

PA 6

Eigenschaften:• schwer entflammbar• halogenfreiAnwendungsbereiche:• Maschinen- u. Anlagenbau• Roboterbau• Kraftfahrzeugbau• Bahntechnik

Material:Polyamide 6, V0 accord. to UL 94 Characteristics:• for series mounting• stackable• for quick, easy and safe mounting• rib fixation as traction relief• corrugated tube is twistable

arround its own axis

Features:• flammable with difficulty• free of halogenApplications:• mechanical engineering and

facility constructions• automotive industry• railway engineering

Cap for corrugatedtube holder

Deckel für Wellschlauchhalter

Durch den Deckel wird der Wellschlauchhalter zu einergeschlossenen und sicheren Verbindung.

The cap makes the corrugated tubeholder into a secure and sealedconnection.

Wellschlauchhalter ohne Deckel /Corrugated tube holder without cap

Typ für passend für Well- Art.-Nr. Art.-Nr. VENW schlauchhalter tiefschwarz grau Stck.

RAL 9005 ähnl. RAL 7031Type for suitable for Corru- Art. no. Art. no. PU

NW gated tube holder jet black grey pcs.RAL 9005 similar to RAL 7031

WLHD-07 7,5 WLH-07 8221207 8221307 500WLHD-09 10 WLH-09 8221209 8221309 500WLHD-11 12 WLH-11 8221211 8221311 500WLHD-16 17 WLH-16 8221216 8221316 500WLHD-21 23 WLH-21 8221221 8221321 500WLHD-29 29 WLH-29 8221229 8221329 500WLHD-36 37 WLH-36 8221236 8221336 500WLHD-48 50 WLH-48 8221248 8221348 500

21

mit Deckel /with cap

mit Deckel und Flansch/ with capand flange

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 24: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Flange for corrugatedtube holder

Flansch für Wellschlauchhalter

Der Flansch ermöglicht eine nachträgliche Kombination jeder Wellschlauchhaltergröße.

The flange enables a subsequent combination of any size ofcorrugated tube holders.

Typ für passend für passend Art.-Nr. Art.-Nr. VENW Wellschlauchhalter zu NW tiefschwarz grau Stck.

RAL 9005 ähnlichRAL 7031

Type for suitable for suitable Art. no. Art. no. PUNW corrugated tube holder for NW jet black grey pcs.

RAl 9005 similar toRAL 7031

WLHF-16 17 WLH-16 16 8221416 8221516 50WLHF-21 23 WLH-21 21 8221421 8221521 50WLHF-29 29 WLH-29 29 8221429 8221529 50WLHF-36 37 WLH-36 37 8221436 8221536 50WLHF-48 50 WLH-48 50 8221448 8221548 50

Corrugated tube holdermounted with flange inclusive cap

Wellschlauchhaltermontiert mit Flansch inklusive Deckel

Typ für A B C D H L M Ø Art.-Nr. Art.-Nr. VENW mm mm mm mm mm mm mm mm tief- grau Stck.

schwarz ähnlichRAL 9005 RAL 7031

Type for A B C D H L M Ø Art. no. Art. no. PUNW mm mm mm mm mm mm mm mm jet black grey pcs.

RAL 9005 similar toRAL 7031

FWLH-16 17 22,5-25,0 37,5 27,5 4,0 40,5 32,5 2,5 5,5 8222016 8222116 50FWLH-21 23 25,0-30,0 37,5 27,5 4,5 48,5 40,0 5,0 5,5 8222021 8222121 50FWLH-29 29 25,0 60,0 37,0-50,0 5,0 55,0 50,0 - 5,5 8222029 8222129 50FWLH-36 37 40,0-50,0 60,0 38,0-50,0 6,0 66,0 60,0 6,0 6,2 8222036 8222136 50FWLH-48 50 47,0-53,0 70,0 47,0-53,0 8,0 80,0 72,0 6,0 6,2 8222048 8222148 50

22

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 25: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Safety-Openerfor SEM Quick

Sicherheitsöffnerfür SEM Quick

Material:Polyamid 6Eigenschaften:• beständig gegen eine Vielzahl

von Ölen, Lösungsmitteln und Chemikalien

PA 6

Material:Polyamide 6 Characteristics:• resistant against many oils,

solutions and chemics

Typ passend für Art.-Nr. VENW gelb Stck.

Type suitable for Art. no. PUNW yellow pcs.

ÖF 07 7 8122507 10ÖF 09 10 8122509 10ÖF 11 12 8122511 10ÖF 16 17 8122516 10ÖF 21 23 8122521 5ÖF 29 29 8122529 5ÖF 36 37 8122536 5ÖF 48 50 8122548 5

Universalfastening clampfor hollow section clamping gland

Universal-Befestigungszangefür Hohlraum-Klemmverschraubung

Typ Art.-Nr. VEStck.

Type Art. no. PUpcs.

KSVBZ-UNI 9001800 1

Einsätze separat bestellenPlease order Inserts separately

Inserts for fasteningclampmetal, metric

Einsätze fürBefestigungszangeMetall, metrisch

Typ passend für Art.-Nr. VEStck.

Type suitable for Art. no. PUpcs.

KSVZ-M 12 12 x 1,5 9001812 1KSVZ-M 16 16 x 1,5 9001816 1KSVZ-M 20 20 x 1,5 9001820 1KSVZ-M 25 25 x 1,5 9001825 1KSVZ-M 32 32 x 1,5 9001832 1KSVZ-M 40 40 x 1,5 9001840 1KSVZ-M 50 50 x 1,5 9001850 1

23

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 26: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

ConduitglandSEM straightquick-mounting system forcorrugated tubes PolyflexPA 6, PA 12, PP, PPmod

Material:Polyamide 66Features:• easy and tight mounting• special click- in system• Grasps from the outside• corrugated pipe can be rotated

within the monting gland• free of halogen* without sealing ring** with sealing ring

Applications:• all fields using corrugated tubes

Mounting instructions:Insert the corrugated tube with a shorttwist all the way into the end of theSEM conduit gland.

Gewinde Type passend für E SW A B C Art.-Nr. Art.-Nr. VENW mm mm mm mm mm schwarz grau Stck.

Thread Type suitable for E SW A B C Art. no. Art. no. PUNW mm mm mm mm mm black grey pcs.

Schlauch-verschraubungSEM GeradeSchnellbefestigungs-Systemfür Wellschläuche PolyflexPA 6, PA 12, PP, PPmod

Material:Polyamid 66Eigenschaften:• einfache und schnelle Montage• spezielle Verrastungstechnik• von aussen greifend• Drehbarkeit des Wellschlauches

in der Verschraubung• halogenfrei* ohne Dichtring** mit Dichtring

PA 66100°

–-25°

PG 7 8,5 10 15 20,2 16 39 3800075 3801071 50PG 7 12 10 19 24 21 40,3 3802070 50PG 9 10 10 18 21,3 20 39,5 3800091 3801098 50PG 9 12 10 19 24 21 40,3 3802091 50PG 11 12 10 19 24 20,8 40,5 3800113 3801110 50PG 11 13 10 20 24,8 22 40 3800114 3801111 50PG 13,5 10 7 22 26,7 23,6 40 3802132 50PG 13,5 14 10 22 26,7 23,6 40 3800130 3801136 50PG 16 17 10 26 29,6 28,9 40,6 3800164 3801160 50PG 21 22 11 30 35 34 46 3800211 3801218 25PG 21 23 11 32 37,6 35 47,7 3800210 3801217 25PG 29 29 12 41 45,2 45 53,8 3800296 3801292 20PG 36 37 12 50 54 56,8 57,4 3800369 3801365 10PG 48 50 12 64 65,3 72,2 57,7 3800482 3801489 5

M 12 x 1,5 NW 10 10 18 21,9 20 40 3803410 3804410 50M 16 x 1,5 NW 10 15 18 21,8 19,8 45 3803413 3804413 50M 16 x 1,5 NW 13 15 19 24 20,9 40 3803412 3804412 50M 20 x 1,5 NW 17 15 26 - - 40 3803418 3804418 50M 25 x 1,5 NW 22 15 30 34,7 33,8 50 3803434 3804424 25M 25 x 1,5 NW 23 15 30 38,2 35 52 3803424 3804422 25M 32 x 1,5 NW 29 12 41 45 44,6 54 3803429 3804429 20

nach EN 60 423 / according to EN 60 423M 12 x 1,5 M 12 11 16 20,2 16 39 3803120 3804127 50M 16 x 1,5 M 16 10 19 23,9 20,3 41 3803163 3804160 50M 20 x 1,5 M 20 10 24 28 25,5 41 3803201 3804208 25M 25 x 1,5 M 25 11 30 33,3 32,2 48 3803252 3804259 50M 32 x 1,5 M 32 10 41 - - 54 3803325 3804321 20

Passender Dichtring Seite 27

Anwendungsbereiche:• Alle Bereiche, in denen

Wellschläuche geführt werden müssen

Montagehinweis:Der Wellschlauch ist unter leichterDrehbewegung bis auf Anschlag indie SEM-Verschraubung einzuführen

Suitable sealing ring page 27

IP 67**IP 54*

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

24

Page 27: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

ConduitglandSEM/W-Angle 90°quick-mounting system forcorrugated tubes PolyflexPA 6, PA 12, PP, PPmod

Material:Polyamide 66Features:• easy and quick mounting• special click- in system• Grasps from the outside• Corrugated tube can be rotated

within the mounting gland• free of halogen* without sealing ring** with sealing ring

Applications:• all applications where corrugated

tubes have to be bended

Mounting instructions:• Insert the corrugated tube with a

short twist all the way into the end ofthe SEM conduit gland.

Gewinde Type passend für F I H Art.-Nr. Art.-Nr. VENW mm mm mm schwarz grau Stck.

Thread Type suitable for F I H Art. no. Art. no. PUNW mm mm mm black grey pcs.

Schlauch-verschraubungSEM/W-Winkel 90°Schnellbefestigungs-Systemfür Wellschläuche PolyflexPA 6, PA 12, PP, PPmod

Material:Polyamid 66Eigenschaften:• einfache und schnelle Montage• spezielle Verrastungstechnik• von aussen greifend• Drehbarkeit des Wellschlauches

in der Verschraubung• halogenfrei* ohne Dichtring** mit Dichtring

PA 66100°

–-25°

PG 7 SEM/W 7 8,5 10 46 32 7303076 7303503 25PG 9 SEM/W 9 10 10 53 35 7303092 7303505 25PG 11 SEM/W 11 12 10 54,5 35,5 7303114 7303513 25PG 13,5 SEM/W 13 14 10 58,5 39,5 7303130 7303521 25PG 16 SEM/W 16 17 11 59 42,5 7303165 7303530 25PG 21 SEM/W 21 23 11 74 49,5 7303211 7303548 25PG 21 SEM/W 21 22 7303212 7303549 25PG 29 SEM/W 29 29 12 89 59 7303297 7303556 10PG 36 SEM/W 36 37 12 107 70 7303360 7303564 5PG 48 SEM/W 48 50 13 121 85 7303483 7303572 5

M 16 x 1,5 SEM/WM 16 10 15 55 40 7303717 7303817 25M 16 x 1,5 SEM/WM 16 13 15 56 40,5 7303718 7303818 25M 20 x 1,5 SEM/WM 20 17 15 62 47 7303721 7303821 25M 25 x 1,5 SEM/WM 25 22 15 77 53,5 7303726 7303826 25M 32 x 1,5 SEM/WM 32 29 15 93 62,5 7303733 7303833 10

nach EN 60 423 / according to EN 60 423M 12 x 1,5 SEM/WM 12 M 12 10 52 33,5 7303712 7303812 25M 16 x 1,5 SEM/WM 16 M 16 10 56 35 7303716 7303816 25M 20 x 1,5 SEM/WM 20 M 20 10 62 40 7303720 7303820 25M 25 x 1,5 SEM/WM 25 M 25 11 77 49 7303725 7303825 25M 32 x 1,5 SEM/WM 32 M 32 15 93 58 7303732 7303832 10

Passender Dichtring Seite 27

Anwendungsbereiche:• Alle Bereiche, in denen

Wellschläuche gewinkelt geführt werden müssen

Montagehinweis:• Der Wellschlauch ist unter leichter

Drehbewegung bis auf Anschlag indie SEM-Verschraubung einzu-führen

Suitable sealing ring page 27

IP 54* IP 67**

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

25

Page 28: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Gewinde Type passend für Klemmbereich E SW 1 SW 2 Art.-Nr. Art.-Nr. VENW mm mm mm mm schwarz grau Stck.

Thread Type suitable for Clamping E SW 1 SW 2 Art. no. Art. no. PUNW range mm mm mm black grey pcs.

mm

Schlauch-/Kabel-verschraubungSchlemmer KOMBIfür Wellschläuche PolyflexPA 6, PA 12, PP, PPmod

Material:Polyamid 66, PolycarbonatEigenschaften:• zug- und ausreissfest• wasser- und öldichter Schutz des

Kabels• mit integrierter ZugentlastungAnwendungsbereiche:• z.B. im Motorraum, Karosserie und

Fahrzeuginnenraum, Maschinen,Apparate, Geräte, Schiffs- und Bahnbau, Schaltschränke undbewegliche Maschinenteile

PA 66PC

100°–

-20°

Gerade / straightPG 9 Kombi 9 10 5 - 8 7 19 18 5510090 5511097 100PG 11 Kombi 11 12 7,5 - 10 8 22 19 5510112 5511119 100PG 13,5 Kombi 13,5 14 9 - 12 9 24 22 5510139 5511135 100PG 16 Kombi 16 17 12 - 15 9 27 26 5510163 5511160 50PG 21 Kombi 21 23 15 - 19 10 32 32 5510210 5511216 25PG 29 Kombi 29 29 18 - 25 12 41 41 5510295 5511291 25PG 36 Kombi 36 37 27 - 32 14 55 50 5510368 5511364 5

90°-Winkel / 90° anglePG 9 Kombi/W9 10 5 - 8 7 19 18 7310099 7311095 100PG 11 Kombi/W11 12 7,5 - 10 8 22 19 7310110 7311117 100PG 13,5 Kombi/W13,5 14 9 - 12 9 24 22 7310137 7311133 100PG 16 Kombi/W16 17 12 - 15 9 27 26 7310161 7311168 50PG 21 Kombi/W21 23 15 - 19 10 32 32 7310218 7311214 25PG 29 Kombi/W29 29 18 - 25 12 41 41 7310293 7311290 25PG 36 Kombi/W36 37 27 - 32 14 55 50 7310366 7311362 5

Passender Dichtring Seite 27

Conduit/cableglandSchlemmer KOMBIfor corrugated tubes PolyflexPA 6, PA 12, PP, PPmod

Material:Polyamide 66, PolycarbonateFeatures:• tension proof and tear out secure• water and oil-tight protection for

the cable• with integrated traction reliefApplications:• e.g. engine compartment, car body

and interior, machining industry, devi-ces, instruments, ship and train buil-ding, switch cabinets and movablemachine parts.

Suitable sealing ring page 27

IP 54* IP 67*** ohne Dichtring** mit Dichtring

* without sealing ring** with sealing ring

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

26

Page 29: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Sealing ringSEM straight/W-Angle 90°

Material:PerbunanCharacteristics:• Shore: 70 ±5

Features:• the O-ring must be mounted into

the first groove of the corrugatedtube.

• The corrugated tube, with its pre-mounted sealing ring, must beinserted into the SEM gland andsimply twisted into the end.

passend für Type I-Ø Stärke Art.-Nr. VENW schwarz Stck.

mm mmFits for Type I-Ø Thickness Art. no. PUNW mm mm black pcs.

Dichtring für SEM Gerade/W-Winkel 90°

Material:PerbunanKennzeichen:• Shore: 70 ±5

Perbunanfür/for:IP 67

100°–

-25°

8,5 9,0 1,0 8112600 10010 8,9 1,25 8112601 10012 8,5 1,5 8112602 10013 8,1 1,6 8112603 10014 12,5 1,5 8112604 10017 15,0 1,5 8112605 10022 15,0 1,5 8112606 10023 17,0 2,0 8112607 10029 23,0 2,5 8112608 10037 23,0 2,5 8112609 10050 31,0 2,5 8112610 100

Montagehinweis:• Der O-Ring muss im ersten

Wellental nach dem Abschnitt montiert werden.

• Der Wellschlauch mit montiertemO-Ring ist unter leichter Dreh-bewegung bis auf Anschlag in dieSEM-Verschraubung einzuführen.

passend für Type B H T Art.-Nr. Art.-Nr. VENW mm mm mm schwarz grau Stck.suitable for Type B H T Art. no. Art. no. PUNW mm mm mm black grey pcs.

8,5/10 UH 9 30 23 13 8218102 8218110 10012/13 UH 11 30 23 13 8218137 8218113 10014 UH 13,5 31 24 20 8218140 - 10017 UH 16 35 30 15 8218170 8218117 10022/23/26 UH 21 42 38 16 8218234 8218123 10029 UH 29 51 49 16 8218293 8218129 5037 UH 36 61 51 18 8218374 8218130 5050 UH 48 74 64 19 8218501 8218150 50

Klemmschellenfür Kunststoff-Wellschläuche

PA

Clamping clip forplastic corrugatedtubes

B

H

T

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

27

Page 30: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Gewinde Type passend für max. E SW Art.-Nr. VEA Ø grau Stck.mm mm mm

Thread Type suitable for max. E SW Art. no. PUA-Ø grey pcs.mm mm

Schlauch-verschraubung NH

Material:Polyamid 6

Eigenschaften:• einfache und zugfeste Montage• unzerbrechlich

PA 6 IP 54120°

–-40°

PG 9 NH 9-15/10 10 8 22 3005100 100PG 9 NH 9-15/13 13 8 19 3000109 100PG 9 NH 9-15/14 14 8 22 3000117 100PG 9 NH 9-15/15 15 8 22 3000125 100PG 11 NH 11-18/16 16 8 22 3000206 100PG 11 NH 11-18/10 10 8 22 3005119 100PG 11 NH 11-18/13 13 8 22 3005208 100PG 11 NH 11-18/14 14 8 22 3005305 100PG 11 NH 11-18/19 19 8 22 3005313 100PG 11 NH 11-18/21 21 8 27 3005402 100PG 13,5 NH 13,5-19/10 10 8 22 3005410 50PG 13,5 NH 13,5-19/13 13 8 22 3005429 50PG 13,5 NH 13,5-19/14 14 8 22 3005437 50PG 13,5 NH 13,5-19/16 16 8 22 3005445 50PG 13,5 NH 13,5-19/19 19 8 24 3000303 50PG 13,5 NH 13,5-19/21 21 8 27 3000311 50PG 16 NH 16-22/10 10 8 22 3005500 50PG 16 NH 16-22/13 13 8 22 3005518 50PG 16 NH 16-22/14 14 8 22 3005607 50PG 16 NH 16-22/16 16 8 22 3005615 50PG 16 NH 16-22/19 19 8 22 3005623 50PG 16 NH 16-22/21 21 12 27 3000401 50PG 16 NH 16-22/24 24 8 35 3000419 50PG 21 NH 21-28/28 28 10 36 3000508 25PG 21 NH 21-28/32 32 10 46 3000516 25PG 21 NH 21-28/26 26 14 36 3000524 25PG 29 NH 29-37/34 34 10 45 3000605 25PG 29 NH 29-37/37 37 10 50 3000613 25PG 29 NH 29-37/44 44 12 55 3005704 50PG 29 NH 29-37/42 42 12 55 3000621 25PG 36 NH 36-47/45 44 12 55 3000702 25PG 36 NH 36-47/53 54 12 65 3000711 25PG 48 NH 48-59/56 56 11,5 65 3000800 25

Anwendungsbereiche:• geeignet für alle glatten und

gewellten Kunststoffschläuche

PG-Gewinde / PG thread

Conduit gland NH

Material:Polyamide 6Features:• easy and tension-proof mounting• unbreakable

Applications:• fits for all smooth and corrugated

tubes

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

28

Page 31: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Schlauch-verschraubung NH

PA 6 IP 54120°

–-40°

Gewinde Type passend für max. E SW Art.-Nr. VEA Ø grau Stck.mm mm mm

Thread Type suitable for max. E Art. no. Art. no. PUA-Ø grey pcs.mm mm mm

Material:Polyamid 6

Eigenschaften:• einfache und zugfeste Montage• unzerbrechlich

Anwendungsbereiche:• geeignet für alle glatten und

gewellten Kunststoffschläuche

Metrisches Gewinde / Metric thread

*) Einschraubstutzen Ø 10 mm / Connecting piece Ø 10 mm

Conduit gland NH

Material:Polyamide 6Features:• easy and tension-proof mounting• unbreakable

Applications:• fits for all smooth and corrugated

tubes

M 16 NH M16-16/10 11,5 8 22 3003160 50M 16 NH M16-16/10* 11,5 8 22 3003161 50M 16 NH M16-16/12 12,0 8 22 3003162 50M 16 NH M16-16/13 13,5 8 22 3003163 50M 16 NH M16-16/14 15 8 22 3003164 50M 16 NH M16-16/16 17 8 22 3003167 50M 16 NH M16-16/19 19 8 23 3003165 50M 20 NH M20-20/10 11,5 11 22 3003210 50M 20 NH M20-20/13 13,5 8 22 3003211 50M 20 NH M20-20/14 15 8 22 3003212 50M 20 NH M20-20/16 17 8 22 3003214 50M 20 NH M20-20/21 21,5 8 27 3003213 50M 20 NH M20-20/24 25 8 35 3003224 50M 25 NH M25-25/24 25 13 35 3003281 25M 25 NH M25-25/28 28,5 10 40 3003280 25M 25 NH M25-25/32 32 10 46 3003282 25M 25 NH M25-25/34 34,8 10 46 3003283 25M 25 NH M25-25/30 30,5 10 46 3003284 25M 25 NH M25-25/28 28,5 14 40 3003285 25M 32 NH M32-32/30 30,5 10 46 3003320 20M 32 NH M32-32/32 32 10 46 3003321 20M 32 NH M32-32/34 34,8 10 46 3003322 20M 32 NH M32-32/34 34,8 14 46 3003323 20M 32 NH M32-32/37 36,8 10 50 3003324 20M 40 NH M40-40/45 44,0 12 55 3003400 10M 50 NH M50-50/56 56,5 12 65 3003500 5

29

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 32: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Schlauch-verschraubung NH

PA 6 IP 54120°

–-40°

Material:Polyamid 6

Eigenschaften:• einfache und zugfeste Montage• unzerbrechlich

Anwendungsbereiche:• geeignet für alle glatten und

gewellten Kunststoffschläuche

Gasgewinde / Gas threadGewinde Type passend für max. E SW Art.-Nr. VE

A Ø grau Stck.mm mm mm

Thread Type suitable for max. E SW Art. no. PUA-Ø grey pcs.mm mm mm

Conduit gland NH

Material:Polyamide 6Features:• easy and tight mounting• unbreakable

Applications:• fits for all smooth and corrugated

tubes

3/8" NH 3/8-16/10 10 8 22 3002101 a. Anfr./on request3/8" NH 3/8-16/13 13 8 22 3004139 a. Anfr./on request3/8" NH 3/8-16/14 14 8 22 3002209 a. Anfr./on request3/8" NH 3/8-16/16 16 8 22 3004163 a. Anfr./on request1/2" NH 1/2-20/10 10 8 22 3002306 a. Anfr./on request1/2" NH 1/2-20/13 13 8 22 3002314 a. Anfr./on request1/2" NH 1/2-20/14 14 8 22 3002403 a. Anfr./on request1/2" NH 1/2-20/16 16 8 22 3002411 a. Anfr./on request1/2" NH 1/2-20/19 19 8 23 3004198 a. Anfr./on request1/2" NH 1/2-20/21 21 8 27 3004210 253/4" NH 3/4-26/28 28 10 41 3004287 253/4" NH 3/4-26/32 32 10 46 3004325 251" NH 1-33/34 34 10 46 3002500 251" NH 1-33/37 37 10 50 3004376 a. Anfr./on request1" NH 1-33/45 45 12 55 3002713 a. Anfr./on request1" NH 1-33/42 42 12 55 3004422 251 1/4" NH 1 1/4-41/45 45 12 55 3004457 a. Anfr./on request1 1/2" NH 1 1/2-48/56 56 12 65 3004562 a. Anfr./on request

30

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 33: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Conduitgland NH90°-angle

Material:Polyamide 6Features:• easy and tight mounting• unbreakable• interior part of angle is smooth

therefore no danger of damage to cable

Applications:• fits for all smooth and corrugated

tubes

Gewinde Type passend für max. E SW Art.-Nr. VEA-Ø grau Stck.mm mm mm

Thread Type suitable for max. E SW Art. no. PUA-Ø grey pcs.mm mm mm

Schlauch-verschraubung NH90°-Winkel

Material:Polyamid 6Eigenschaften:• einfache und zugfeste Montage• unzerbrechlich• Innenseite hat runde Anhebung im

Winkelbereich, d.h. keine Beschädigung des Kabels

PA 6120°

–-40°

PG 9 NH 9-15/10W 10 10 18 7304001 100PG 9 NH 9-15/13W 13 10 18 7304002 100PG 9 NH 9-15/14W 14 10 18 7304003 100PG 9 NH 9-15/16W 16 10 18 7304004 100PG 11 NH 11-18/10W 10 10 21 7304005 100PG 11 NH 11-18/13W 13 10 21 7304006 100PG 11 NH 11-18/14W 14 10 21 7304007 100PG 11 NH 11-18/16W 16 10 21 7304008 100PG 11 NH 11-18/19W 19 10 21 7304009 100PG 13,5 NH 13-19/19W 19 12 23 7304011 50PG 16 NH 16-22/19W 19 12 23 7304015 50PG 16 NH 16-22/21W 21 12 25 7304016 50PG 16 NH 16-22/24W 24 12 25 7304017 50PG 21 NH 21-28/28W 28 14 25 7304021 50PG 21 NH 21-28/30W 30 14 34 7304022 50

M 16 NH M16-16/10 11,5 10 21 7304116 25M 16 NH M16-16/13 13,5 10 21 7304117 25M 16 NH M16-16/14 14,5 10 21 7304118 25M 16 NH M16-16/16 17 10 21 7304119 25M 20 NH M20-20/19 19,5 12 23 7304120 25M 20 NH M20-20/21 22 12 23 7304121 25M 25 NH M25-25/19 19,5 12 27 7304125 25M 25 NH M25-25/21 22 12 27 7304126 25M 25 NH M25-25/24 24 12 27 7304127 25M 25 NH M25-25/26 26,5 12 27 7304128 25M 32 NH M32-32/28 28,5 14 34 7304132 10M 32 NH M32-32/30 30,5 14 34 7304133 10M 32 NH M32-32/32 32,5 14 34 7304134 10M 32 NH M32-32/34 34,5 14 34 7304135 1

Anwendungsbereiche:• geeignet für alle glatten und

gewellten Kunststoffschläuche

IP 54

PG-Gewinde / PG thread

Metrisches Gewinde / Metric threadSc

hutz

schl

auch

syst

eme

Tube

Pro

tect

ion

Syst

ems

31

Page 34: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

UniversalGland-HolderType UVH

Material:Polypropylene , impact resistantCharacteristics:PG/metric threadFeatures:• screwed holder for

cable glands or conduit glandsApplications:• Machines and devices

für Gewinde Type Art.-Nr. VE Stückfor thread Type Art. no. PU pcs.

Universal-Verschraubungs-halterTyp UVH

Material:Polypropylen, schlagfestKennzeichen:PG-/metrisches GewindeEigenschaften:• anschraubbarer Halter zur

Aufnahme von Kabel- oderSchlauchverschraubungen

Anwendungsbereiche:• Anlagen-, Schaltschrank- und

Maschinenbau

PP100°

–-40°

PG / PGPG 9 UVH- 9 3201090 50PG 11 UVH-11 3201112 50PG 13,5 UVH-13,5 3201139 50PG 16 UVH-16 3201163 50PG 21 UVH-21 3201210 50PG 29 UVH-29 3201295 25PG 36 UVH-36 3201368 25PG 42 UVH-42 3201422 25PG 48 UVH-48 3201481 25

metrisch / metricM 20 x 1,5 UVH-M 20 3201072 50M 25 x 1,5 UVH-M 25 3201073 50M 32 x 1,5 UVH-M 32 3201074 50M 40 x 1,5 UVH-M 40 3201075 50M 50 x 1,5 UVH-M 50 3201076 50

32

Type A B b D d H h L l tmm mm mm mm mm mm mm mm mm mm

Type A B b D d H h L l tmm mm mm mm mm mm mm mm mm mm

UVH- 9/UVH-M 20 29 40 5,7 19 10,5 14,5 6 14 12 11,5UVH-11/UVH-M 25 37 50 5,7 27 13 20 7 14 12 11,5UVH-13,5/UVH-M 32 37 50 5,7 27 15,5 20 7 14 12 11,5UVH-16/UVH-M 40 37 50 5,7 27 17,5 20 7 14 12 11,5UVH-21/UVH-M 50 43 57 5,7 32 22 25 8 14 12 11,5UVH-29 53 67 6,7 41 30 27,5 8 16,5 15 14UVH-36 65 80 6,7 52 39 33 8,5 16,5 15 14UVH-42 69 86 6,7 59 47 36,5 9,5 18,5 15,5 15UVH-48 76 93 6,7 65 53 38,5 10 19 15,5 16

Technische Daten:Technical Data:

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 35: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

33

NW I-Ø A-Ø Biegeradius Art.-Nr. Art.-Nr. VEmm mm mm grau schwarz Ring m

NW I-Ø A-Ø Bending radius Art. no. Art. no. PUmm mm mm grey black ring m

MetallschlauchLIQUIDTITE N

Material:Schlauch: Stahl verzinkt Mantel: Polyvinylchlorid PVCObere Gebrauchstemperatur:kurzzeitig: 90° CKennzeichen:• wendelgewickelt• Einhackprofil

Stahlverzinkt

12 12,0 18,0 60 0409012 0409112 3016 15,5 21,5 75 0409016 0409116 3021 20,5 27,0 90 0409021 0409121 3027 26,5 33,0 120 0409027 0409127 3035 35,1 41,8 150 0409035 0409135 3040 40,3 47,8 200 0409040 0409140 2550 51,6 59,9 250 0409050 0409150 25

Eigenschaften:• silikon- und cadmiumfrei• sehr flexibel• druckfestAnwendungsbereiche:• Stabiler Schutzschlauch für

elektrische Leitungen mit hochwertigem flammwidrigem PVC-Mantel

PVC

Metal tubeLIQUIDTITE N

Material:Tube: galvanized steel Cover: Polyvinylchloride PVCMaximum Temperature:short-term: 90° CCharacteristics:• square-locked core

Features:• free of silicone and cadmium• very flexible• pressure-proofApplications:robust protective tube for electricalwires with high-grade flame retardent PVC cover

70°–

-15°

NW I-Ø A-Ø Biegeradius Art.-Nr. VEmm mm mm schwarz Ring m

NW I-Ø A-Ø Bending radius Art. no. PUmm mm mm black ring m

MetallschlauchLIQUIDTITE X.T.

Material:Schlauch: Stahl verzinktMantel: Polyvinylchlorid PVCObere Gebrauchstemperatur:kurzzeitig: 120° CKennzeichen:• wendelgewickelt• Einhackprofil

Stahlverzinkt

PVC

12 12,0 18,0 60 0412112 3016 15,5 21,5 75 0412116 3021 20,5 27,0 90 0412121 3027 26,5 33,0 120 0412127 3035 35,1 41,8 150 0412135 3040 40,3 47,8 200 0412140 2550 51,6 59,9 250 0412150 25

Eigenschaften:• silikon- und cadmiumfrei• sehr flexibel• sehr druckfestAnwendungsbereiche:• Stabiler Schutzschlauch für

elektrische Leitungen mit hochwertigem flammwidrigem PVC-Mantel

Metal tubeLIQUIDTITE X.T.

Material:Tube: galvanized steelCover: Polyvinylchloride PVCMaximum Temperature:short-term: 120° CCharacteristics:• square-locked core

Features:• free of silicone and cadmium• very flexible• pressure-proofApplications:robust protective tube for electricalwires with high-grade flame retardentPVC cover

105°–

-45°

Passende Schlauchverschraubungen Seite 36 Suitable conduit glands page 36

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 36: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

34

NW I-Ø A-Ø Biegeradius Art.-Nr. Art.-Nr. VEmm mm mm grau schwarz Ring m

NW I-Ø A-Ø Bending radius Art. no. Art. no. PUmm mm mm grey black ring m

MetallschlauchANACONDASEALTITE E.F.

Material:Schlauch: Stahl verzinkt Mantel: Polyvinylchlorid PVCObere Gebrauchstemperatur:kurzzeitig: 90° CKennzeichen:• wendelgewickelt• EinhackprofilEigenschaften:• silikon- und cadmiumfrei

Stahlverzinkt

3/8" 12,6 17,8 60 0402389 0402834 751/2" 16,0 21,1 75 0402508 0402842 603/4" 21,0 26,4 90 0402753 0402885 501" 26,5 33,1 120 0402109 0402869 301 1/4" 35,1 41,8 135 0402125 0402877 301 1/2" 40,3 47,8 165 0402150 0402893 152" 51,6 59,9 210 0402206 0402907 15

• sehr flexibel• druckfest• DEMKO, SEMKO, NEMKO, SETIAnwendungsbereiche:• Stabiler Schutzschlauch für elektr.

Anlagen und Maschinenbau, wo einflexibler Schlauch für Dauerbewe-gungen gefordert ist

PVC

Metal tubeANACONDASEALTITE E.F.

Material:Tube: galvanized steel Cover: Polyvinylchloride PVCMaximum Temperature:short-term: 90° CCharacteristics:• square-locked coreFeatures:• free of silicone and cadmium• very flexible

• pressure-proof• DEMKO, SEMKO, NEMKO, SETIApplications:• robust protective tube for electrical

systems and installations where aflexible conduit for frequent move-ments is required

70°–

-25°�

NW I-Ø A-Ø Biegeradius Art.-Nr. VEmm mm mm schwarz Ring m

NW I-Ø A-Ø Bending radius Art. no. PUmm mm mm black ring m

MetallschlauchANACONDASEALTITE H.C.

Material:Schlauch: Stahl verzinktMantel: Polyvinylchlorid PVCObere Gebrauchstemperatur:kurzzeitig: 120° CKennzeichen:• wendelgewickelt• Einhackprofil

Stahlverzinkt

PVC

3/8" 12,6 17,8 60 0404381 751/2" 16,0 21,1 75 0404500 603/4" 21,0 26,4 90 0404756 501" 26,5 33,1 120 0404101 301 1/4" 35,1 41,8 135 0404128 301 1/2" 40,3 47,8 165 0404152 152" 51,6 59,9 210 0404209 15

Eigenschaften:• silikon- und cadmiumfrei• sehr flexibel• sehr druckfest• DEMKO, SEMKO, NEMKO, SETIAnwendungsbereiche:• Stabiler Schutzschlauch für elektr.

Anlagen und Maschinenbau, wo einflexibler Schlauch für Dauerbewe-gungen gefordert ist

Metal tubeANACONDASEALTITE H.C.

Material:Tube: galvanized steelCover: Polyvinylchloride PVCMaximum Temperature:short-term: 120° CCharacteristics:• square-locked core

Features:• free of silicone and cadmium• very flexible• pressure-proof• DEMKO, SEMKO, NEMKO, SETIApplications:• robust protective tube for electrical

systems and installations where aflexible conduit for frequent move-ments is required

105°–

-45°

Passende Schlauchverschraubungen Seite 36 Suitable conduit glands page 36

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 37: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

35

NW I-Ø A-Ø Biegeradius Art.-Nr. VEmm mm mm schwarz Ring m

NW I-Ø A-Ø Bending radius Art. no. PUmm mm mm black ring m

MetallschlauchANACONDASEALTITE H.T.D.L.mit glatter PVC-Ummantelung

Material:Schlauch: Stahl verzinkt mitdurchgehendem KupferleiterMantel: Polyvinylchlorid PVCObere Gebrauchstemperatur:kurzzeitig: 120° CKennzeichen:• wendelgewickelt• EinhackprofilEigenschaften:• silikon- und cadmiumfrei• sehr flexibel

Stahlverzinkt

3/8" 12,6 17,8 70 0401382 601/2" 16,1 21,1 90 0401501 603/4" 21,1 26,4 115 0401757 451" 26,8 33,1 145 0401102 301 1/4" 35,4 41,8 175 0401129 151 1/2" 40,3 47,8 205 0401153 152" 51,6 59,9 240 0401200 15

• druckfest• EMI/EMP AbschirmungAnwendungsbereiche:• Stabiler Schutzschlauch für elektr.

Anlagen und Maschinenbau, wo einflexibler Schlauch für Dauerbewe-gungen mit UL/CSA-Zulassunggefordert ist

PVC

Metal tubeANACONDASEALTITE H.T.D.L.with smooth PVC cover

Material:Tube: galvanized steel with integratedcopperwireCover: Polyvinylchloride PVCMaximum Temperature:short-term: 120° CCharacteristics:• square locked coreFeatures:• free of silicone and cadmium• very flexible

• pressure-proof• EMI/EMP ShieldingApplications:• robust protective tube for electrical

systems and installations where aflexible conduit for frequent movements with UL/CSA approval is required

105°–

-40°� �

NW I-Ø A-Ø Biegeradius Art.-Nr. VEmm mm mm grau Ring m

NW I-Ø A-Ø Bending radius Art. no. PUmm mm mm grey ring m

MetallschlauchANACONDASEALTITE N.M.U.A.

Material:Schlauch: VollkunststoffKennzeichen:• innenliegende Spirale

Voll-kunststoff

3/8" 12,6 17,8 100 0413012 301/2" 16,0 21,1 175 0413016 303/4" 21,0 26,4 230 0413020 301" 26,5 33,1 330 0413026 301 1/4" 35,1 41,8 410 0413035 15

Metal tubeANACONDASEALTITE N.M.U.A.

Material:Tube: all-plasticCharacteristics:• interior helix

75°–

-17°� �

Passende Schlauchverschraubungen Seite 36 Suitable conduit glands page 36

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 38: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Gewinde passend für / suitable for E SW Art.-Nr. VEI x A-Ø NW mm mm Stck.mm

Thread I x A-Ø NW E SW Art. no. PUmm mm mm pcs.

Material:Messing vernickeltDichtungsring aus halogenfreiemPolyamidKennzeichen:• PG und metrisches Gewinde• gerade und 90° Winkel

Conduitglandfor LIQUIDTITE andANACONDA SEALTITE

Eigenschaften:• halogenfrei• sehr solideAnwendungsbereiche:• für schnelle Montage von

LIQUIDTITE- und SEALTITE-Schläuche

MS IP 67

PG gerade / PG straightPG 11 12 x 18 3/8" 13 26 2609511 50PG 13,5 12 x 18 3/8" 13 26 2609513 50PG 16 16 x 21 1/2" 13 29 2609516 50PG 21 20 x 27 3/4" 13 35 2609521 25PG 29 26 x 33 1" 16 45 2609529 10PG 36 35 x 41 1 1/4" 16 54 2609536 5PG 42 40 x 48 1 1/2" 18 62 2609542 5PG 48 51 x 60 2" 18 77 2609548 4

metrisch gerade / metric straightM 16 x 1,5 12 x 18 3/8" 13 26 2609616 50M 20 x 1,5 16 x 21 1/2" 13 29 2609620 50M 25 x 1,5 20 x 27 3/4" 13 35 2609625 25M 32 x 1,5 26 x 33 1" 16 45 2609632 10M 40 x 1,5 35 x 41 1 1/4" 16 54 2609640 5M 50 x 1,5 40 x 48 1 1/2" 18 62 2609650 5M 63 x 1,5 51 x 60 2" 18 77 2609663 4

PG 90°-Winkel / PG 90°-anglePG 11 12 x 18 3/8" 13 26 2609711 50PG 13,5 12 x 18 3/8" 13 26 2609713 50PG 16 16 x 21 1/2" 13 29 2609716 50PG 21 20 x 27 3/4" 13 35 2609721 25PG 29 26 x 33 1" 16 45 2609729 10PG 36 35 x 41 1 1/4" 16 54 2609736 5PG 42 40 x 48 1 1/2" 18 62 2609742 5PG 48 51 x 60 2" 18 77 2609748 4

metrisch 90°-Winkel / metric 90°-angleM 16 x 1,5 12 x 18 3/8" 13 26 2609816 50M 20 x 1,5 16 x 21 1/2" 13 29 2609820 50M 25 x 1,5 20 x 27 3/4" 13 35 2609825 25M 32 x 1,5 26 x 33 1" 16 45 2609832 10M 40 x 1,5 35 x 41 1 1/4" 16 54 2609840 5M 50 x 1,5 40 x 48 1 1/2" 18 62 2609850 5M 63 x 1,5 51 x 60 2" 18 77 2609863 4

Schlauch-verschraubungenfür LIQUIDTITE und ANACONDA SEALTITE

Material:nickel plated brassseal ring made of halogenfreePolyamideCharacteristics:• PG and metric thread• straight and 90° angle

36

� �

Features:• Free of halogen• very robustApplications:• for quick mounting of

LIQUIDTITE and SEALTITE conduits

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 39: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

NW I-Ø A-Ø Biegeradius Art.-Nr. VEMetall Ring

mm mm mm blank mNW I-Ø A-Ø Bending radius Art. no. PU

metal ringmm mm mm bare m

MetallschlauchBlank MS-B

Material:Stahl verzinktKennzeichen:• runder Querschnitt• spiralgewellt• kantiges ProfilEigenschaften:• Metall-Schutzschlauch ohne

Dichtung• druck- und schlagfest

7 8 10 32 0000086 509 11 14 45 0000116 5011 14 17 50 0000140 5013,5 16 19 50 0000167 5016 18 21 55 0000183 5021 23 27 65 0000230 2529 32 36 95 0000329 2536 40 45 105 0000400 2542 45 52 130 0000450 2548 50 56 140 0000507 25

Passende Schlauchverschraubungen:Rakkord MS-B, Seite 38-39

Anwendungsbereiche:• stabiler Schutzschlauch für

elektrische Leitungen, bei Anschlüssen von Maschinen und Starkstromanlagen als Schlauchbogen

Stahl*verzinkt

IP 50

NW I-Ø A-Ø Biegeradius Art.-Nr. VEMetall Ring

mm mm mm blank mNW I-Ø A-Ø Bending radius Art. no. PU

metal ringmm mm mm bare m

6 8 30 0001066 107 9 0001074 10

7 8 10 32 0001082 1010 13 40 0001104 10

9 11 14 45 0001112 1013 16 45 0001139 10

11 14 17 50 0001147 1013,5 16 19 50 0001163 1016 18 21 55 0001180 1021 23 27 65 0001236 10

28 34 0001280 1029 32 36 95 0001325 1036 40 45 105 0001406 1042 45 52 130 0001457 1048 50 56 140 0001503 10

10 m Ring / 10 m ring

Metal tubebare MS-B

Material:galvanized steelCharacteristics:• round cross-section• helical-corrugated• angular profileFeatures:• metal protective tube without seal• pressure-proof and impact resistant

Applications:• stabile protective tube for electric

wiring of machine connections andhigh-voltage current line as benthose.

Suitable conduit glands:Rakkord MS-B, page 38-39

37

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 40: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

PG Type passend für E SW Art.-Nr. VEI x A Ø mm mm Stck.mm

PG Type suitable for E SW Art. no. PUI x A Ø mm mm pcs.mm

Schlauch-verschraubungRakkord MS-B für Metallschläuche Blank MS-B

Material:Messing vernickelt

Typ 30 PG 7 300810/7 8 x 10 5 14 2000075 50starres PG 9 301114/9 11 x 14 5 17 2000091 50Gewinde PG 11 301417/11 14 x 17 6 20 2000113 50Type 30 PG 13,5 301619/13 16 x 19 6 22 2000130 50armoured PG 16 301821/16 18 x 21 6 24 2000164 50thread PG 21 302327/21 23 x 27 7 30 2000210 25

PG 29 303236/29 32 x 36 8 39 2000296 10PG 36 304045/36 40 x 45 8 50 2000369 10PG 42 304552/42 45 x 52 10 60 2000423 5PG 48 305056/48 50 x 56 10 65 2000482 5

Typ 31 PG 7 310810/7 8 x 10 6 14 2001071 100mit PG 9 311114/9 11 x 14 7 17 2001098 50Innengewinde PG 11 311417/11 14 x 17 8 20 2001110 50Type 31 PG 13,5 311619/13 16 x 19 9 22 2001136 50with female PG 16 311821/16 18 x 21 9 24 2001160 25thread PG 21 312327/21 23 x 27 10 30 2001217 25

PG 29 313236/29 32 x 36 12 39 2001292 10PG 36 314045/36 40 x 45 13 50 2001365 10PG 42 314552/42 45 x 52 14 60 2001420 5PG 48 315056/48 50 x 56 16 65 2001489 5

Typ 33 PG 7 330810/7 8 x 10 - 14 2002078 100ohne PG 9 331114/9 11 x 14 - 17 2002094 50Gewinde PG 11 331417/11 14 x 17 - 20 2002116 50Type 33 PG 13,5 331619/13 16 x 19 - 22 2002132 50without PG 16 331821/16 18 x 21 - 24 2002167 25thread PG 21 332327/21 23 x 27 - 30 2002213 25

PG 29 333236/29 32 x 36 - 39 2002299 10PG 36 334045/36 40 x 45 - 50 2002361 10PG 42 334552/42 45 x 52 - 60 2002426 5PG 48 335056/48 50 x 56 - 65 2002485 5

Typ 36 PG 7 360810/7 8 x 10 5 14 2003074 100drehbar PG 9 361114/9 11 x 14 5 17 2003090 50mit PG 11 361417/11 14 x 17 6 20 2003112 50Aussen- PG 13,5 361619/13 16 x 19 6 22 2003139 50gewinde PG 16 361821/16 18 x 21 6 24 2003163 25Type 36 PG 21 362327/21 23 x 27 7 30 2003210 25rotatable PG 29 363236/29 32 x 36 8 39 2003295 10with male PG 36 364045/36 40 x 45 8 50 2003368 10thread PG 42 364552/42 45 x 52 10 60 2003422 5

PG 48 365056/48 50 x 56 10 65 2003481 5

Anwendungsbereiche:• zur schnellen Montage• für Metallschlauch Blank MS-B

IP 54MS

PG-Gewinde / PG thread

ConduitglandRakkord MS-Bfor metal tubesbare MS-B

Material:nickel-plated brass

Applications:• for quick mounting• for bare metal tube MS-B

38

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 41: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Metrisch Type passend für E SW Art.-Nr. Art.-Nr. VEI x A Ø mm mm kurzes langes Stck.mm kurz/lang Gewinde Gewinde

Metric Type Fits for E SW Art. no. Art. no. PUI x A Ø mm mm short long pcs.mm short/long thread thread

Schlauch-verschraubungRakkord MS-Bfür MetallschläucheBlank MS-B

Material:Messing vernickelt

Typ 30 M 16 301114/M 16 11 x 14 6/15 17 2051010 2051117 50starres M 16 301417/M 16 14 x 17 6/15 20 2051028 2051125 50Gewinde M 20 301619/M 20 16 x 19 6/15 22 2051036 2051133 50Type 30 M 20 301821/M 20 18 x 21 6/15 24 2051044 2051141 50armoured M 25 302327/M 25 23 x 27 7/15 30 2051052 2051150 20thread M 32 303236/M 32 32 x 36 8/15 39 2051060 2051168 20

M 40 304045/M 40 40 x 45 8/15 50 2051079 2051176 20M 50 304552/M 50 45 x 52 9/15 60 2051087 2051184 10M 63 305056/M 63 50 x 56 10/15 65 2051095 2051192 5

Typ 31mitInnen-gewindeType 31with femalethread

Typ 33ohneGewindeType 33withoutthread

Typ 36 M 16 361114/M 16 11 x 14 6/15 17 2052016 2052113 50drehbar M 16 361417/M 16 14 x 17 6/15 20 2052024 2052121 50mit M 20 361619/M 20 16 x 19 6/15 22 2052032 2052130 50Aussen- M 20 361821/M 20 18 x 21 6/15 24 2052040 2052148 50gewinde M 25 362327/M 25 23 x 27 7/15 30 2052059 2052156 20Type 36 M 32 363236/M 32 32 x 36 8/15 39 2052067 2052164 20rotatable M 40 364045/M 40 40 x 45 8/15 50 2052075 2052172 20with male M 50 364552/M 50 45 x 52 10/15 60 2052083 2052180 10thread M 63 365056/M 63 50 x 56 10/15 65 2052091 2052199 5

Anwendungsbereiche:• zur schnellen Montage• für Metallschlauch Blank MS-B

Metrisches Gewinde / Metric thread

ConduitglandRakkord MS-Bfor metal tubebare MS-B

Material:nickel-plated brass

Applications:• for quick mounting• for bare metal tube MS-B

IP 54MS

}}

NichterhältlichNotavailable

Seite 38page 38

39

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 42: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

NW I-Ø A-Ø Biegeradius Art.-Nr. Art.-Nr. VEmm mm mm grau schwarz Ring

mNW I-Ø A-Ø Bending radius Art. no. Art. no. PU

mm mm mm grey black ringm

MetallschlauchMS-PVCmit PVC-Ummantelung

Material:Schlauch: Stahl verzinktMantel: Polyvinylchlorid PVCKennzeichen:• spiralgewelltEigenschaften:• silikon- und cadmiumfrei• besonders flexibel• druckfest

PVC100°

–-25°

7 7 10 25 0100072 0102075 509 10 14 35 0100102 0102105 5011 13 17 50 0100137 0102130 5013,5 15 19 55 0100153 0102156 5016 17 21 60 0100170 0102172 5021 21 27 65 0100218 0102210 2529 28 36 75 0100285 0102288 2536 37 45 90 0100374 0102377 2542 44 52 120 0100447 0102440 2548 48 56 135 0100480 0102482 25

Weitere Abmessungen auf Anfrage

Passende Schlauchverschraubungen:MS-PVC und MS-PU, Seite 42-43

Anwendungsbereiche:• stabiler Schutzschlauch für

elektrische Leitungen, mit hochwertigem flammwidrigem PVC-Mantel

Stahlverzinkt

IP 67

10 m Ring I-Ø A-O Biegeradius Art.-Nr. Art.-Nr. VENW mm mm mm grau schwarz Ring

m10 m ring I-Ø A-Ø Biegeradius Art. no. Art. no. PUNW mm mm mm grey black ring

m

7 7 10 25 0101079 0102507 109 10 14 35 0101109 0102510 10

11 15 0101117 1011 13 17 50 0101133 0102513 10

14 18 0101141 1013,5 15 19 55 0101150 0102515 1016 17 21 60 0101176 0102517 1021 21 27 65 0101214 0102521 1029 28 36 75 0101281 0102528 1036 37 45 90 0101370 1048 48 56 135 0101486 10

Metal tubeMS-PVCwith PVC sheath

Material:Tube: galvanized steelsheath: Polyvinylchloride PVCCharacteristics:• helical-corrugatedFeatures:• contains no silicone or cadmium• very flexible• pressure-proof

Applications:• robust protective tube for electric

lines, with high-grade flameretardant PVC sheath

Further dimensions on request

Suitable conduit glands:MS-PVC and MS-PU, page 42-43

40

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 43: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

NW I-Ø A-Ø Biegeradius Art.-Nr. VEmm mm mm blau Ring

mNW I-Ø A-Ø Bending radius Art. no. PU

mm mm mm blue ringm

MetallschlauchMS-PUmit PU-Ummantelung

Material:Schlauch: Stahl verzinktMantel: Polyurethan PUKennzeichen:• runder Querschnitt• kantiges ProfilEigenschaften:• halogen-, silikon-, cadmiumfrei• Metall-Schutzschlauch ohne

Dichtung• hohe Zähigkeit• abriebbeständig

Stahlverzinkt

PU-Um-mantelung

IP 67

9 10 14 35 0100710 5011 13 17 50 0100713 5013,5 15 19 55 0100715 5016 17 21 60 0100717 5021 21 27 65 0100721 2529 28 36 75 0100728 25

Passende Schlauchverschraubungen:Rakkord MS-PVC und MS-PU, Seite 42-43

Anwendungsbereiche:• stabiler Schutzschlauch für

elektrische Leitungen, besonders bei gefordertem Schutz vor Öl, Fettund Benzin, bei tiefen oder erhöhtenTemperaturen, für schwere mechanische Beanspruchung,z.B. Schiffs- und Bahnbau

100°–

-40°

§

Metal tubeMS-PUwith PU sheath

Material:Tube: galvanized steelSheath: Polyurethane PUCharacteristics:• round cross-section• angular profileFeatures:• free of halogen,

silicone or cadmium• metal protective tube without seal• very endurable• non-abrasive

Applications:• robust protective tube for electric

lines, especially for protectionagainst oil, grease and gasoline, for high and low temperatures, for heavy mechanical load e.g. shipand train building industry

Suitable conduit glands:Rakkord MS-PVC and MS-PU, page 42-43

41

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 44: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

PG Type passend für E SW Art.-Nr. VEI x A Ø mm mm Stck.mm

PG Type Fits for E SW Art. no. PUI x A Ø mm mm pcs.mm

Schlauch-verschraubungRakkord MS-PVC und MS-PU für Metallschläuche MS-PVC und MS-PU

Material:Messing vernickelt

Typ 30 PG 7 300710/7 7 x 10 5 14 2004070 100starres PG 9 301014/9 10 x 14 5 17 2004097 50Gewinde PG 11 301317/11 13 x 17 6 20 2004119 50Type 30 PG 13,5 301519/13 15 x 19 6 22 2004135 50armoured PG 16 301721/16 17 x 21 6 24 2004160 25thread PG 21 302127/21 21 x 27 7 30 2004216 25

PG 29 302836/29 28 x 36 8 39 2004291 10PG 36 303745/36 37 x 45 8 50 2004364 10PG 42 304452/42 44 x 52 10 60 2004429 5PG 48 304856/48 48 x 56 10 64 2004488 5

Typ 31 PG 7 310710/7 7 x 10 6 14 2005077 100mit PG 9 311014/9 10 x 14 7 17 2005093 50Innengewinde PG 11 311317/11 13 x 17 8 20 2005115 50Type 31 PG 13,5 311519/13 15 x 19 9 22 2005131 50with female PG 16 311721/16 17 x 21 9 24 2005166 25thread PG 21 312127/21 21 x 27 10 30 2005212 25

PG 29 312836/29 28 x 36 12 39 2005298 10PG 36 313745/36 37 x 45 13 50 2005360 10PG 42 314452/42 44 x 52 14 60 2005425 5PG 48 314856/48 48 x 56 16 64 2005484 5

Typ 33 PG 7 330710/7 7 x 10 - 14 2006073 100ohne PG 9 331014/9 10 x 14 - 17 2006090 50Gewinde PG 11 331317/11 13 x 17 - 20 2006111 50Type 33 PG 13,5 331519/13 15 x 19 - 22 2006138 50without PG 16 331721/16 17 x 21 - 24 2006162 25thread PG 21 332127/21 21 x 27 - 30 2006219 25

PG 29 332836/29 28 x 36 - 39 2006294 10PG 36 333745/36 37 x 45 - 50 2006367 10PG 42 334452/42 44 x 52 - 60 2006421 5PG 48 334856/48 48 x 56 - 64 2006480 5

Typ 36 PG 7 360710/7 7 x 10 5 14 2007070 100drehbar PG 9 361014/9 10 x 14 5 17 2007096 100mit PG 11 361317/11 13 x 17 6 20 2007118 50Aussen- PG 13,5 361519/13 15 x 19 6 22 2007134 50gewinde PG 16 361721/16 17 x 21 6 24 2007169 25Type 36 PG 21 362127/21 21 x 27 7 30 2007215 25rotatable PG 29 362836/29 28 x 36 8 39 2007290 10with male PG 36 363745/36 37 x 45 8 50 2007363 10thread PG 42 364452/42 44 x 52 10 60 2007428 5

PG 48 364856/48 48 x 56 10 64 2007487 5

Anwendungsbereiche:• zur schnellen Montage• für Metallschlauch,

mit PVC- u. PU-Mantel (MS-PVC u. MS-PU)

IP 54MS

PG-Gewinde / PG thread

ConduitglandRakkord MS-PVCand MS-PUfor metal tubes MS-PVC and MS-PU

Material:nickel-plated brass

Applications:• for quick mounting• for metal tube with PVC and PU

sheath (MS-PVC and MS-PU)

42

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 45: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Metrisch Type passend für E SW Art.-Nr. Art.-Nr. VEI x A Ø mm mm kurzes langes Stck.mm kurz/lang Gewinde Gewinde

Metric Type Fits for E SW Art. no. Art. no. PUI x A Ø mm mm short long pcs.mm short/long thread thread

Schlauch-verschraubungRakkord MS-PVC und MS-PUfür Metallschläuche MS-PVC und MS-PU

Material:Messing vernickelt

Typ 30 M 16 301014/M 16 10 x 14 6/15 17 2034018 2034115 50starres M 16 301317/M 16 13 x 17 6/15 20 2034026 2034123 50Gewinde M 20 301317/M 20 -/15 22 2034130 50Type 30 M 20 301519/M 20 15 x 19 6/15 22 2034034 2034131 50armoured M 20 301721/M 20 17 x 21 6/15 24 2034042 2034140 50thread M 25 302127/M 25 21 x 27 7/15 30 2034050 2034158 20

M 32 302836/M 32 28 x 36 8/15 39 2034069 2034166 20M 40 303745/M 40 37 x 45 8/15 50 2034077 2034174 20M 50 304452/M 50 44 x 52 9/15 60 2034085 2034182 10M 63 304856/M 63 48 x 56 10/15 65 2034093 2034190 5

Typ 31mitInnen-gewindeType 31with femalethread

Typ 33ohneGewindeType 33withoutthread

Typ 36 M 10 360710/M 10 7 x 10 6/15 14 2035006 2035103 50drehbar M 16 361014/M 16 10 x 14 6/15 17 2035014 2035111 50mit M 16 361317/M 16 13 x 17 6/15 20 2035022 2035120 50Aussen- M 20 361519/M 20 15 x 19 6/15 22 2035030 2035138 50gewinde M 20 361721/M 20 17 x 21 6/15 24 2035049 2052070 50Type 36 M 25 362127/M 25 21 x 27 7/15 30 2035057 2035154 20rotatable M 32 362836/M 32 28 x 36 8/15 39 2035065 2035162 20with male M 40 363745/M 40 37 x 45 8/15 50 2035073 2035170 20thread M 50 364452/M 50 44 x 52 9/15 60 2035081 2035189 10

M 63 364856/M 63 48 x 56 10/15 65 2035090 2035197 5

Anwendungsbereiche:• zur schnellen Montage• für Metallschlauch,

mit PVC-, PU-Mantel (MS-PVC, MS-PU)

IP 54MS

Metrisches Gewinde / Metric thread

ConduitglandRakkord MS-PVCand MS-PUfor metal tubes MS-PVC and MS-PU

Material:nickel-plated brass

Applications:• for quick mounting• for metal tube with PVC and PU

sheath (MS-PVC and MS-PU)

}}

NichterhältlichNotavailable

Seite 42page 42

43

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 46: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

NW I-Ø A-Ø Biegeradius Art.-Nr. VE*mm mm mm Ring

mNW I-Ø A-Ø Bending radius Art. no. PU*

mm mm mm ringm

MetallschlauchMS-DUmit Draht-Umflechtung

Material:Schlauch: Stahl verzinktMantel: verzinkter Eisendraht,6- bis 12-fädigKennzeichen:• spiralgewellt• runder Querschnitt• kantiges Profil

Stahlverzinkt

Draht-Umflechtung

IP 50

7 7 10 25 0200077 509 10 14 30 0200107 5011 13 17 40 0200131 5013,5 15 19 45 0200158 5016 17 21 50 0200174 5021 21 27 55 0200212 2529 28 36 70 0200280 2536 37 45 95 0200379 2542 44 52 130 0200441 2548 48 56 135 0200484 25

*) Auch als 10 m Ring lieferbar

Passende Schlauchverschraubungen:Rakkord MS-DU, Seite 45-46

Eigenschaften:• Metall-Schutzschlauch

ohne Dichtung• zug- und druckfest• schlagfest• besonders flexibelAnwendungsbereiche:• stabiler Schutzschlauch für

elektrische Leitungen, für erhöhteDruckfestigkeitsanforderung,Stahldrahtumflechtung für erhöhtemechanische Beanspruchung

Metal tubeMS-DUwith wire mesh sheath

Material:Hose: galvanized steelSheath: galvanized iron wireCharacteristics:• helical-corrugated• round cross-section• angular profileFeatures:• protective metal tube without seal• tension and pressure-proof• shock-resistant• highly flexible

Applications:• robust protective tube for electric

lines, for increased pressure-proofrequirements, steel wire mesh forincreased mechanical load.

*) also available as 10 m ring

Suitable conduit glands:Rakkord MS-DU, page 45-46

44

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 47: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

PG Type passend für E SW Art.-Nr. VEI x A Ø mm mm Stck.mm

PG Type suitable for E SW Art. no. PUI x A Ø mm mm pcs.mm

Schlauch-verschraubungenRakkord MS-DU für Metallschläuche MS-DU

Material:Messing vernickelt

Typ 40 PG 7 400710/7 7 x 10 5 15 2008076 100starres PG 9 401014/9 10 x 14 5 17 2008092 50Gewinde PG 11 401317/11 13 x 17 6 22 2008114 50Type 40 PG 13,5 401519/13 15 x 19 6 24 2008130 50armoured PG 16 401721/16 17 x 21 6 27 2008165 25thread PG 21 402127/21 21 x 27 7 32 2008211 25

PG 29 402836/29 28 x 36 8 41 2008297 10PG 36 403745/36 37 x 45 8 52 2008360 10PG 42 404452/42 44 x 52 10 60 2008424 5PG 48 404856/48 48 x 56 10 65 2008483 5

Typ 41 PG 7 410710/7 7 x 10 6 15 2009072 100mit PG 9 411014/9 10 x 14 7 17 2009099 50Innen- PG 11 411317/11 13 x 17 8 22 2009110 50gewinde PG 13,5 411519/13 15 x 19 9 24 2009137 50Type 41 PG 16 411721/16 17 x 21 9 27 2009161 25with female PG 21 412127/21 21 x 27 10 32 2009218 25thread PG 29 412836/29 28 x 36 12 41 2009293 10

PG 36 413745/36 37 x 45 13 52 2009366 10PG 42 414452/42 44 x 52 14 60 2009420 5PG 48 414856/48 48 x 56 14 65 2009480 5

Typ 43 PG 7 430710/7 7 x 10 - 15 2010070 100ohne PG 9 431014/9 10 x 14 - 17 2010097 50Gewinde PG 11 431317/11 13 x 17 - 22 2010119 25Type 43 PG 13,5 431519/13 15 x 19 - 24 2010135 25without PG 16 431721/16 17 x 21 - 27 2010160 25thread PG 21 432127/21 21 x 27 - 32 2010216 25

PG 29 432836/29 28 x 36 - 41 2010291 10PG 36 433745/36 37 x 45 - 52 2010364 10PG 42 434452/42 44 x 52 - 60 2010429 5PG 48 434856/48 48 x 56 - 65 2010488 5

Typ 46 PG 7 460710/7 7 x 10 5 15 2011077 100drehbar PG 9 461014/9 10 x 14 5 17 2011093 50mit PG 11 461317/11 13 x 17 6 22 2011115 50Aussen- PG 13,5 461519/13 15 x 19 6 24 2011131 50gewinde PG 16 461721/16 17 x 21 6 27 2011166 25Type 46 PG 21 462127/21 21 x 27 7 32 2011212 25rotatable PG 29 462836/29 28 x 36 8 41 2011298 10with male PG 36 463745/36 37 x 45 8 52 2011360 10thread PG 42 464452/42 44 x 52 10 60 2011425 5

PG 48 464856/48 48 x 56 10 65 2011484 5

Anwendungsbereiche:• zur schnellen Montage• für Metallschlauch

mit DrahtummantelungMS-DU

IP 54MS

PG-Gewinde / PG thread

ConduitglandRakkord MS-DUfor metal tubes MS-DU

Material:nickel-plated brass

Applications:• for quick mounting• for metal tube with wire mesh

MS-DU

45

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 48: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Metrisch Type passend für E SW Art.-Nr. Art.-Nr. VEI x A Ø mm mm kurzes langes Stck.mm kurz/lang Gewinde Gewinde

Metric Type suitable for E SW Art. no. Art. no. PUI x A Ø mm mm short long pcs.mm short/long thread thread

Schlauch-verschraubungenRakkord MS-DU für Metallschläuche MS-DU

Material:Messing vernickelt

Typ 40 M 16 401014/M 16 10 x 14 6/15 17 2036010 2036100 50starres M 16 401317/M 16 13 x 17 6/15 22 2036029 2036118 50Gewinde M 20 401519/M 20 15 x 19 6/15 24 2036037 2036126 50Type 40 M 20 401721/M 20 17 x 21 6/15 27 2036045 2036134 50armoured M 25 402127/M 25 21 x 27 7/15 32 2036053 2036142 20thread M 32 402836/M 32 28 x 36 8/15 41 2036061 2036150 20

M 40 403745/M 40 37 x 45 8/15 48 2036070 2036169 20M 50 404452/M 50 44 x 52 9/15 60 2036088 2036177 10M 63 404856/M 63 48 x 56 10/15 65 2036096 2036185 5

Typ 41mitInnen-gewindeType 41with femalethread

Typ 43ohneGewindeType 43withoutthread

Typ 46 M 16 461014/M 16 10 x 14 6/15 17 2037017 2037106 50drehbar M 16 461317/M 16 13 x 17 6/15 22 2037025 2037114 50mit M 20 461519/M 20 15 x 19 6/15 24 2037033 2037122 50Aussen- M 20 461721/M 20 17 x 21 6/15 27 2037041 2037130 50gewinde M 25 462127/M 25 21 x 27 7/15 32 2037050 2037149 20Type 46 M 32 462836/M 32 28 x 36 8/15 41 2037068 2037157 20rotatable M 40 463745/M 40 37 x 45 8/15 52 2037076 2037165 20with male M 50 464652/M 50 46 x 52 9/15 60 2037084 2037173 10thread M 63 464856/M 63 48 x 56 10/15 65 2037092 2037181 5

Anwendungsbereiche:• zur schnellen Montage• für Metallschlauch,

mit Drahtummantelung MS-DU

IP 54MS

Metrisches Gewinde / Metric thread

ConduitglandRakkord MS-DUfor metal tubes MS-DU

Material:nickel-plated brass

Applications:• for quick mounting• for metal tube with wire mesh

MS-DU

}}

NichterhältlichNotavailable

Seite 45page 45

46

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 49: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

NW I-Ø A-Ø Biegeradius Art.-Nr. VEmm mm mm Ring

mNW I-Ø A-Ø Bending radius Art. no. PU

mm mm mm ringm

MetallschlauchMS-PVC-DUmit PVC- und Draht-Umflechtung

Material:Schlauch: Stahl verzinktMantel: PVC mit verzinktem Eisendraht umflochtenKennzeichen:• runder QuerschnittEigenschaften:• Metall-Schutzschlauch • Öl-, Wasser- und Staubdicht• Schutz vor scharfen Spänen und

glühenden Funken

7 7 11 25 0300071 509 10 15 30 0300101 5011 13 18 40 0300136 5013,5 15 20 45 0300152 5016 17 22 50 0300179 5021 21 28 55 0300217 2529 28 37 70 0300284 2536 37 46 95 0300373 2542 44 53 130 0300446 2548 48 57 135 0300489 25

Passende Schlauchverschraubung:Rakkord MS-PVC-DU, Seite 48-49

Anwendungsbereiche:• besonders widerstandsfähiger

Schutzschlauch für hochwertigeWerkzeugmaschinen aller Art

Stahlverzinkt

PVCDraht-

Umflechtung

Metal tubeMS-PVC-DUwith PVC and wire mesh sheath

Material:Tube: galvanized steelSheath: PVC braided with galvanizediron wireCharacteristics:• round cross-sectionFeatures:• protective metal tube• oil, water and dust-tight• protection against sharp

chips and glowing sparks

Applications:• extremely resistant metal tube

for all kinds of high-grade machine tools

Suitable conduit gland:Rakkord MS-PVC-DU, page 48-49

47

100°–

-25°IP 67

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 50: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

PG Type passend für E SW Art.-Nr. VEI x A Ø mm mm Stck.mm

PG Type suitable for E SW Art. no. PUI x A Ø mm mm pcs.mm

Schlauch-verschraubungenRakkord MS-PVC-DU für Metallschläuche MS-PVC-DU

Material:Messing vernickelt

Typ 40 PG 7 400711/7 7 x 11 5 15 2012073 100starres PG 9 401015/9 10 x 15 5 17 2012090 50Gewinde PG 11 401318/11 13 x 18 6 22 2012111 50Type 40 PG 13,5 401520/13 15 x 20 6 24 2012138 50armoured PG 16 401722/16 17 x 22 6 27 2012162 25thread PG 21 402128/21 21 x 28 7 32 2012219 25

PG 29 402837/29 28 x 37 8 41 2012294 10PG 36 403746/36 37 x 46 8 52 2012367 10PG 42 404453/42 44 x 53 10 60 2012421 5PG 48 404857/48 48 x 57 10 65 2012480 5

Typ 41 PG 7 410711/7 7 x 11 5 15 2013070 100mit PG 9 411015/9 10 x 15 5 17 2013096 50Innen- PG 11 411318/11 13 x 18 6 22 2013118 50gewinde PG 13,5 411520/13 15 x 20 6 24 2013134 50Type 41 PG 16 411722/16 17 x 22 6 27 2013169 25with female PG 21 412128/21 21 x 28 7 32 2013215 25thread PG 29 412837/29 28 x 37 8 41 2013290 10

PG 36 413746/36 37 x 46 8 52 2013363 10PG 42 414453/42 44 x 53 10 60 2013428 5PG 48 414857/48 48 x 57 10 65 2013487 5

Typ 43 PG 7 430711/7 7 x 11 5 15 2014076 100ohne PG 9 431015/9 10 x 15 5 17 2014092 50Gewinde PG 11 431318/11 13 x 18 6 22 2014114 50Type 43 PG 13,5 431520/13 15 x 20 6 24 2014130 50without PG 16 431722/16 17 x 22 6 27 2014165 25thread PG 21 432128/21 21 x 28 7 32 2014211 25

PG 29 432837/29 28 x 37 8 41 2014297 10PG 36 433746/36 37 x 46 8 52 2014360 10PG 42 434453/42 44 x 53 10 60 2014424 5PG 48 434857/48 48 x 57 10 65 2014483 5

Typ 46 PG 7 460711/7 7 x 11 5 15 2015072 100drehbar PG 9 461015/9 10 x 15 5 17 2015099 50mit PG 11 461318/11 13 x 18 6 22 2015110 50Aussen- PG 13,5 461520/13 15 x 20 6 24 2015137 50gewinde PG 16 461722/16 17 x 22 6 27 2015161 25Type 46 PG 21 462128/21 21 x 28 7 32 2015218 25rotatable PG 29 462837/29 28 x 37 8 41 2015293 10with male PG 36 463746/36 37 x 46 8 52 2015366 10thread PG 42 464453/42 44 x 53 10 60 2015420 5

PG 48 464857/48 48 x 57 10 65 2015480 5

Anwendungsbereiche:• zur schnellen Montage• für Metallschutzschlauch

MS-PVC-DU

IP 54MS

PG-Gewinde / PG thread

ConduitglandRakkord MS-PVC-DUfor metal tubes MS-PVC-DU

Material:nickel-plated brass

Applications:• for quick mounting• for metal tube MS-PVC-DU

48

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 51: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Metrisch Type passend für E SW Art.-Nr. VEI x A Ø mm mm Stck.mm

Metric Type suitable for E SW Art. no. PUI x A Ø mm mm pcs.mm

Schlauch-verschraubungenRakkord MS-PVC-DU für Metallschläuche MS-PVC-DU

Material:Messing vernickelt

Typ 40 M 16 401015/M 16 10 x 15 6 17 2012516 50starres M 16 401318/M 16 13 x 18 6 22 2012517 50Gewinde M 20 401520/M 20 15 x 20 6 24 2012520 50Type 40 M 20 401722/M 20 17 x 22 6 27 2012521 50armoured M 25 402128/M 25 21 x 28 7 30 2012525 20thread M 32 402837/M 32 28 x 37 8 41 2012532 20

M 40 403746/M 40 37 x 46 8 48 2012540 20M 50 404453/M 50 44 x 53 9 55 2012550 10M 63 404857/M 63 48 x 57 10 65 2012563 5

Typ 41mitInnen-gewindeType 41with femalethread

Typ 43ohneGewindeType 43withoutthread

Typ 46 M 16 461015/M 16 10 x 15 6 17 2015516 50drehbar M 16 461318/M 16 13 x 18 6 22 2015517 50mit M 20 461520/M 20 15 x 20 6 24 2015520 50Aussen- M 20 461722/M 20 17 x 22 6 27 2015521 50gewinde M 25 462128/M 25 21 x 28 7 32 2015525 20Type 46 M 32 462837/M 32 28 x 37 8 41 2015532 20rotatable M 40 463746/M 40 37 x 46 8 52 2015540 20with male M 50 464453/M 50 46 x 53 9 60 2015550 10thread M 63 464857/M 63 48 x 57 10 65 2015563 5

Anwendungsbereiche:• zur schnellen Montage• für Metallschutzschlauch

MS-PVC-DU

IP 54MS

Metrisches Gewinde / metric thread

ConduitglandRakkord MS-PVC-DUfor metal tubesMS-PVC-DU

Material:nickel-plated brass

Applications:• for quick mounting• for metal tube MS-PVC-DU

}}

NichterhältlichNotavailable

Seite 48page 48

49

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 52: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

NW I-Ø A-Ø Biegeradius Art.-Nr. VEmm mm mm grau Ring

mNW I-Ø A-Ø Bending radius Art. no. PU

mm mm mm grey ringm

KabelschutzschlauchRakkordflex

Material:PVCKennzeichen:• glatte InnenflächeEigenschaften:• silikon- und cadmiumfrei• achsial und vertikal verdrehbar• knick- und bruchfest

PVC60°

–-5°

10 10,0 14,0 50 1100106 5012 12,0 16,0 60 1100122 5013 13,0 17,0 65 1100130 5014 14,0 18,6 70 1100149 5016 16,0 20,6 70 1100165 5018 18,0 22,8 75 1100181 5022 22,0 27,2 90 1100220 5025 25,0 30,2 100 1100254 5028 28,0 33,4 120 1100289 5030 30,0 35,4 140 1100300 5038 38,0 43,8 190 1100386 5050 50,0 56,6 270 1100505 50

Passende Schlauchverschraubungen:NH-Rakkordflex, Seite 51BI-MO, Seite 52

Anwendungsbereiche:• für Installation unter Strahlen-

schutzbedingungen geeignet, universell einsetzbar im Maschinen-und Apparatebau

Cable protection tubeRakkordflex

Material:PVCCharacteristics:• smooth inner surfaceFeatures:• no silicone or cadmium• twistable in axial and vertical

direction• kink and break-proof

Applications:• for installation considering radiationprotection conditions, universallyapplicable in engineering ant toolingmachines.

Suitable conduit glands:NH-Rakkordflex, page 51BI-MO, page 52

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

50

Page 53: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Gewinde Type passend für passend für E SW Art.-Nr. VENW I x A Ø mm mm grau Stck.

mmThread Type Fits for Fits for E SW Art. no. PU

NW I x A Ø mm mm grey pcs.mm

Schlauch-verschraubung NHRakkordflexfür Kabelschutzschlauch Rakkordflex

Material:Polyamid 6, PolycarbonatEigenschaften:• zugfeste Montage• unzerbrechlich

PA 6100°

–-40°

Zulassung für PG 29, 36, 48Approval for PG 29, 36, 48

PG 9 NH 9-15/14 10 10 x 14 8 22 3000117 100PG 11 NH 11-18/16 12 12 x 16 8 22 3000206 100PG 13,5 NH 13-19/19 14 14 x 18,6 8 24 3000303 50PG 16 NH 16-22/21 16 16 x 20,6 8 27 3000401 50PG 16 NH 16-22/24 18 18 x 22,8 8 35 3000419 50PG 21 NH 21-28/28 22 22 x 27,2 10 36 3000508 25PG 21 NH 21-28/32 25 25 x 30,2 10 46 3000516 25PG 29 NH 29-37/34 28 28 x 33,4 10 45 3000605 25PG 29 NH 29-37/37 30 30 x 35,4 10 50 3000613 25PG 36 NH 36-47/45 38 38 x 43,8 12 55 3000702 25PG 48 NH 48-59/56 50 50 x 56,2 11,5 65 3000800 25

Anwendungsbereiche:• Zur exakten Montage des Schutz-

schlauchs Rakkordflex auch geeignet für andere glatte undgewellte Kunststoffschläuche

IP 54 �

Cablegland NHRakkordflexfor cable protection tubeRakkordflex

Material:Polyamide 6, PolycarbonateFeatures:• tension-proof• unbreakable

Applications:• for exact mounting of the protec-

tion tube Rakkordflex; also suitablefor other smooth corrugated tubes. Sc

hutz

schl

auch

syst

eme

Tube

Pro

tect

ion

Syst

ems

51

Page 54: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Gewinde Type passend für passend für passende E SW Art.-Nr. VENW I x A Ø Erdungshülse mm mm Stck.

mm EHThread Type suitable for suitable for suitable E SW Art. no. PU

NW I x A Ø ground insert mm mm pcs.mm EH

BI-MOUniversal-Schlauch-verschraubungfür KabelschutzschlauchRakkordflex

Material:Messing vernickeltEigenschaften:• BI-MO immer mit zugehörigem

Erdungseinsatz EH bestellen

MS

PG 9 50009 10 10 x 14 EH 10 6,5 21 2102099 50PG 11 50011 12 12 x 16 EH 12 6,5 26 2102110 50PG 13,5 50135 14 14 x 18,6 EH 14 6,5 27 2102137 50PG 16 50016 16 16 x 20,6 EH 16 6,5 30 2102161 50PG 21 50021 21 22 x 27,2 EH 21 8 41 2102218 50PG 29 50029 28 28 x 33,4 EH 28 8 46 2102293 25PG 36 50036 38 38 x 43,8 EH 38 10 60 2102366 10PG 48 50048 50 50 x 56,2 EH 50 14 80 2102480 5

Anwendungsbereiche:• Für universellen Anschluss aller

gebräuchlichen Elektrorohre und-Schläuche

IP 65

Passende Erdungseinsätze EH Seite 53

BI-MOUniveral conduitglandfor cable protection tubeRakkordflex

Material:nickel-plated brassFeatures:• always order the appropriate

ground insert EH for BI-MO

Applications:• for all-purpose connections of

commonly used electrical pipes andtubes

Suitable ground inserts EH page 53

Maßtabelle/Dimension chart

Für Gewinde d1 d2 SW D L1 Emm mm mm mm mm

For thread d1 d2 SW D L1 Emm mm mm mm mm

PG 9 15,2 12,5 21 23,5 21 6,5PG 11 18,6 15 26 29 21,5 6,5PG 13,5 20,4 16,5 27 29 22,5 6,5PG 16 22,5 18,5 30 32 25 7PG 21 28,3 23,5 41 44 31 8PG 29 37 32 46 50 30 8PG 36 47 41 60 64 37 10PG 48 59,3 50 80 87 54 14

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

52

Page 55: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

passend für Type Art.-Nr. VEBI-MO-Verschraubung Stck.

suitable for Type Art. no. PUBI-MO glands pcs.

Erdungseinsätzefür BI-MOSchlauchverschraubungen

Material:Messing, blankEigenschaften:• zum vorschriftsmäßigen Anschluss

von Metallschläuchen• decken die beim Ablängen

entstehenden scharfen Kanten undGrate ab

• vermeiden Isolationsschäden anKabeln und Leitungen

50009 EH 10 6500102 150009 EH 11 6500110 150011 EH 12 6500129 150011 EH 13 6500137 150011/50135 EH 14 6500145 150135 EH 15 6500153 150135 EH 16 6500161 150016 EH 17 6500170 150016 EH 18 6500188 150016 EH 19 6500196 150021 EH 20 6500200 150021 EH 21 6500218 150021 EH 22 6500226 150021 EH 23 6500234 150021 EH 24 6500242 150021 EH 25 6500250 150021 EH 26 6500269 150021 EH 27 6500277 150021 EH 28 6500285 150029 EH 29 6500293 150029 EH 30 6500307 150029 EH 31 6500315 150029 EH 32 6500323 150029 EH 33 6500331 150029 EH 34 6500340 150036 EH 35 6500358 150036 EH 36 6500366 150036 EH 37 6500374 150036 EH 38 6500382 150036 EH 39 6500390 150036 EH 40 6500404 150036 EH 41 6500412 150036 EH 42 6500420 150048 EH 43 6500439 150048 EH 44 6500447 150048 EH 45 6500455 150048 EH 46 6500463 150048 EH 47 6500471 150048 EH 48 6500480 150048 EH 49 6500490 150048 EH 50 6500501 1

Anwendungsbereiche:• Für universellen Anschluss aller

gebräuchlichen Elektrorohre und -schläuche

MS

Ground insertsfor BI-MOconduit glands

Material:plain brassFeatures:• for correct connection of metal

tubes• covers the sharply cut grated edge• avoids damages of cable/wire

Isolation

Applications:• for all-purpose connections of

commonly used electrical pipes andtubes Sc

hutz

schl

auch

syst

eme

Tube

Pro

tect

ion

Syst

ems

53

Page 56: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Cable protectiontube Rakkord-DU(Vinnylan-DU)

Material:Tube: PVCBraiding: galvanized steel wireMaximum Temperature:short-term: 120°CFeatures:• resistant to oil and acid• Dielectric strength: 250 KV (cm)

NW I-Ø A-Ø passende Art.-Nr. VEmm mm Verschraubung m

NW I-Ø A-Ø suitable gland Art. no. PUmm mm m

KabelschutzschlauchRakkord-DU(Vinnylan-DU)

Material:Schlauch: PVCUmflechtung:verzinkter Eisendraht, 6-12-fädigObere Gebrauchstemperatur:kurzzeitig: 120°CEigenschaften:• öl- und säurebeständig• Durchschlagfestigkeit: 250 KV (cm)

PVC IP 65

7 7 11 750711/7; 750711/M 12 1002015 509 9 13 750913/9; 750913/M 16 1002023 50

11 11 15 751115/11; 751115/M 16 1002031 5013,5 13 17 751317/13; 751317/M 20 1002040 5016 16 21 751621/16; 751621/M 20 1002058 5021 21 26 752126/21; 752126/M 25 1002066 2528 28 33 752833/29; 752833/M 32 1002074 2535 35 40 753540/36; 753540/M 40 1002082 2542 42 48 754248/42; 754248/M 50 1002090 2548 48 54 754854/48; 754854/M 63 1002104 25

54

80°–

-30°

Passende Verschraubungen Seite 55 Suitable glands page 55

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 57: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Specialglandsseries 75for rapid assembly of electro-protective tubestype Rakkord-DU

Material:• 1/2: nickel-plated brass• 3: NitrilCharacteristics:• PG/metric threadFeatures:• secure, robust and durable

assembly• absolutely leakproof• irreproachably grounding

Außengewinde Type passend für SW 1 SW 2 E L Art.-Nr. VEI-Ø x A-Ø mm mm mm mm Stck.mm

Outer thread Type suitable for SW 1 SW 2 E L Art. no. PUI-Ø x A-Ø mm mm mm mm pcs.mm

Spezial-VerschraubungenSerie 75zur schnellen Montage von Elektro-Schutzschläuchen,Type Rakkord-DU

Material:• 1/2: Messing vernickelt• 3: NitrilKennzeichen:• PG/metrisches GewindeEigenschaften:• sichere, robuste und dauerhafte

Montage• absolute Dichtheit• einwandfreie Erdung

MS IP 67

PG / PGPG 7 750711/7 7 x 11 20 20 7 27 2700077 50PG 9 750913/9 9 x 13 22 22 8 29 2700093 50PG 11 751115/11 11 x 15 24 24 10 33 2700115 50PG 13,5 751317/13 13 x 17 30 30 10 39 2700131 20PG 16 751621/16 16 x 21 32 32 12 42 2700166 50PG 21 752126/21 21 x 26 38 38 12 45 2700212 25PG 29 752833/29 28 x 33 48 48 12 46 2700298 20PG 36 753540/36 35 x 40 58 55 12 47 2700360 1PG 42 754248/42 42 x 48 65 65 14 55 2700425 1PG 48 754854/48 48 x 54 70 70 14 59 2700484 1

metrisch / metricM 12 x 1,5 750711/M 12 7 x 11 20 20 7 27 2700512 50M 16 x 1,5/9 750913/M 16 9 x 13 22 22 8 29 2700516 50M 16 x 1,5/11 751115/M 16 11 x 15 24 24 8 31 2700517 50M 20 x 1,5/13 751317/M 20 13 x 17 30 30 10 39 2700520 50M 20 x 1,5/16 751621/M 20 16 x 21 32 32 10 40 2700521 50M 25 x 1,5 752126/M 25 21 x 26 38 38 12 45 2700525 20M 32 x 1,5 752833/M 32 28 x 33 48 48 12 46 2700532 20M 40 x 1,5 753540/M 40 35 x 40 58 55 12 47 2700540 20M 50 x 1,5 754248/M 50 42 x 48 65 65 14 55 2700550 10M 63 x 1,5 754854/M 63 48 x 54 70 70 14 59 2700563 5

55

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 58: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Cable protectiontube Rakkord(Vinnylan)

Material:high quality suspension PVCMaximum Temperature:short-term: 100°CFeatures:• resistant to oil and acid• Dielectric strength: 250 kV (cm)

Durchmesser Durchmesser passende Art.-Nr. VEInnen Aussen Verschraubung mmm mmInternal External suitable gland Art. no. PUDiameter Diameter mmm mm

KabelschutzschlauchRakkord(Vinnylan)

Material:hochwertiges Suspensions-PVCObere Gebrauchstemperatur:kurzzeitig: 100°CEigenschaften:• öl- und säurebeständig• Durchschlagfestigkeit: 250 kV (cm)

13,0 15,0 KSV 9; KSV M16 1000071 5012,5 16,5 KSV 11; KSV M20/11 1000080 5013,5 17,5 KSV 11; KSV M20/11 1000098 5016,0 20,0 KSV 13; KSV M20/13 1000110 5018,0 22,0 KSV 13; KSV M20/13 1000128 5018,5 22,5 KSV 16; KSV M25 1000136 5025,5 31,5 KSV 21; KSV M32 1000160 2533,5 39,5 KSV 29; KSV M40 1000195 2536,0 42,0 KSV 29; KSV M40; KSV 36 1000209 2540,0 46,0 KSV 36 1000217 2542,0 48,0 KSV 42 1000225 2548,0 54,0 KSV 48 1000233 25

56

PVC IP 6580°

–-25°

Passende Verschraubungen Seite 57 Suitable glands page 57

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 59: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Type passend für E SW Art.-Nr. VEI-Ø x A-Ø mm mm Stck.mm

Outer thread Type suitable for E SW Art. no. PUI-Ø x A-Ø mm mm pcs.mm

Spezial-VerschraubungenKSVzur schnellen Montage vonElektro-Schutzschläuchenaus PVC

Material:• 1: Messing vernickelt• 2: O-Ring: NitrilKennzeichen:• PG/metrisches GewindeEigenschaften:• schwere Ausführung• Schlauchschelle wird mitgeliefert

MS

PG / PGPG 9 KSV 9 13,0 x 15,0 19 2200090 100PG 11 KSV 11 16,0 x 20,0 22 2200112 100PG 13,5 KSV 13 18,0 x 22,0 24 2200139 50PG 16 KSV 16 18,5 x 22,5 27 2200163 50PG 21 KSV 21 25,5 x 31,5 32 2200210 25PG 29 KSV 29 36,0 x 42,0 41 2200295 25PG 36 KSV 36 36,0 x 42,0 50 2200368 5PG 42 KSV 42 42,0 x 48,0 57 2200422 5PG 48 KSV 48 48,0 x 54,0 64 2200481 5

metrisch / metricM 16 x 1,5 KSV M16 13,0 x 15,0 7 19 2200516 100M 20 x 1,5/11 KSV M20/11 16,0 x 20,0 7 24 2200520 100M 20 x 1,5/13 KSV M20/13 18,0 x 22,0 8 24 2200521 50M 25 x 1,5 KSV M25 18,5 x 22,5 8 28 2200525 50M 32 x 1,5 KSV M32 25,5 x 31,5 8 36 2200532 25M 40 x 1,5 KSV M40 36,0 x 42,0 8 44 2200540 25

IP 65

SpecialglandsKSVfor rapid assembly ofelectro-protective tubesmade of PVC

Material:• 1: nickel-plated brass• 2: O-ring: NitrilCharacteristics:PG/metric threadFeatures:• heavy type• hose clamp enclosed

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

57

Page 60: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Plastic tubeType KU

Material:PVCFeatures:• highly flexible• rotatable both axially and vertically• largely resistant to oil and acid• air-tight• easy to clean

Applications:• Protective tube for electrical

conductions• For sucking and blowing air and all

other gaseous media

Durchmesser Durchmesser Art.-Nr. VEInnen Aussen mca. mm ca. mmInternal External Art. no. PUDiameter Diameter mapprox. mm approx. mm

KunststoffschlauchTyp KU

Material:PVCEigenschaften:• hochflexibel• axial und vertikal verdrehbar• weitgehend öl- und säurebeständig• luftdicht• leicht zu reinigen

12,0 18,4 1300121 1014,0 20,4 1300148 1016,0 22,4 1300164 1020,0 26,4 1300202 1024,0 30,4 1300245 1030,0 36,4 1300300 1035,0 43,0 1301357 1045,0 53,0 1301454 1050,0 58,0 1301500 10

Anwendungsbereiche:• Schutzschlauch für elektrische

Leitungen• Zum Saugen und Blasen von Luft

und allen anderen gasförmigenMedien

58

PVC IP 6860°

–-10°

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 61: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Rubber end-sleeveswith traction relief

Material:NeopreneCharacteristics:• Traction relief achieved by fixing

with cable tiesFeatures:• resistant to oil and gasoline

Type Klemmbereich Klemmbereich Ø A Ø D H J K Art.-Nr. VEfür Kabel für Schlauch mm mm mm mm mm Stck.Ø B mm Ø C mm

Type Clamping range Clamping range Ø A Ø D H J K Art. no. PUfor cable for tube mm mm mm mm mm pcs.Ø B mm Ø C mm

Gummi-Endmuffenmit Zugentlastung

Material:NeoprenKennzeichen:• Zugentlastung durch Festklemmen

mit Kabelbindern möglichEigenschaften:• benzin- und ölfest

Neopren

GZ 9 4 - 9 17 - 19 10,5 22 33 19 11 8500096 3000GZ 11 5 - 12 20 - 23 14,0 25 33 19 12 8500118 2400GZ 13,5 6 - 14 22 - 25 16,0 27 33 19 12 8500134 2000GZ 16 7 - 17 24 - 27 18,0 29 47 25 17 8500169 1200GZ 21 9 - 20 30 - 33 25,0 35 47 25 17 8500215 800GZ 29 16 - 30 39 - 43 31,0 45 47 25 17 8500290 800GZ 36 23 - 40 49 - 54 42,0 55 47 25 17 8500363 500GZ 42 30 - 45 56 - 61 48,0 62 47 25 17 8500428 100GZ 48 33 - 50 61 - 66 54,0 65 47 25 17 8500487 100

59

80°–

-25°

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 62: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

NW I-Ø A-Ø Biegeradius Art.-Nr. Art.-Nr. VEmm mm mm schwarz grau Ring

mNW I-Ø A-Ø Bending radius Art. no. Art. no. PU

mm mm mm black grey ringm

WellschlauchSchlemmer-Gigant

Material:Polyamid 6/12Eigenschaften:• parallel gewellt• wasserabweisend

PA 6PA 12

100°–

-40°

PA 670 66,5 79,2 170 1250053 1250050 1070 66,5 79,2 170 1250054 1250051 12,570 66,5 79,2 170 1250055 1250052 2595 91,0 106,0 225 1250060 1250063 1095 91,0 106,0 225 1250061 1250064 12,595 91,0 106,0 225 1250062 1250065 25

PA 1270 66,5 79,2 170 1250083 1250080 1070 66,5 79,2 170 1250084 1250081 12,570 66,5 79,2 170 1250085 1250082 2595 91,0 106,0 225 1250090 1250093 1095 91,0 106,0 225 1250091 1250094 12,595 91,0 106,0 225 1250092 1250095 25

Passende Schlauchverschraubungen:Schlemmer Gigant, Seite 61

Anwendungsbereiche:• z.B. im Motorraum, Karosserie und

Fahrzeuginnenraum, Hausgeräte-industrie, Heiz- und Klimatechnik,Elektroindustrie

Corrugated tubeSchlemmer-Gigant

Material:Polyamide 6/12Features:• parallel corrugated• water-repellent

Applications:• e.g. engine compartment, car body

and interior, home appliance industry, heating and air-conditio-ning installations, electrical industry

Suitable conduit glands:Schlemmer Gigant, page 61

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

60

Page 63: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Gewinde NW Art.-Nr. Art.-Nr. VEschwarz grau

Thread NW Art. no. Art. no. PUblack grey

Schlauch-verschraubungSchlemmer-Gigantfür Wellschlauch Schlemmer-Gigant

Material:Polyamid 6Eigenschaften:• halogenfrei

PA 6100°

–-30°

Gerade / Straight70 3205071 3205070 auf Anfrage / on request95 3205091 3205090 auf Anfrage / on request

90° Winkel / 90° angle70 3205073 3205072 auf Anfrage / on request95 3205093 3205092 auf Anfrage / on request

Anwendungsbereiche:• Kabelschutz im Maschinen- und

Apparatebau

IP 54

ConduitglandSchlemmer-Gigantfor corrugated tubeSchlemmer-Gigant

Material:PolyamideFeatures:• free of halogen

Applications:• cable protection for machines

and devices

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

61

Page 64: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Corrugated tubeSchlemmer-Gigant

Material:PolypropyleneCharacteristics:• Water repellent, no humidity

absorbing• Great shape permanence to heat• Enormous cold impact strength• High strength• Excellent behaviour under reversed

bending stresses• Excellent chemical resistance

Applications:• Machines and devices

Nennweite I-Ø A-Ø Biegeradius Art.-Nr. VEmm mm mm schwarz

Nominal width I-Ø A-Ø Bending radius Art. no. PUmm mm mm black

WellschlauchSchlemmer-Gigant

Material:PolypropylenEigenschaften:• wasserabweisend, nimmt keine

Feuchte auf• hohe Wärmeformbeständigkeit• enorme Kälteschlagzähigkeit• hohe Zähigkeit• sehr gutes Biegewechselverhalten• sehr gute chemische Beständigkeit

PP

NW 70 70 78 120 1252072 auf Anfrage/on requestNW 100 100 110,5 145 1252101 auf Anfrage/on request

Anwendungsbereiche:• Maschinen- und Apparatebau

62

105°–

-40°

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Passende Anschlussarmaturen Seite 63 Suitable connector fixings page 63

Page 65: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Connector Fixingsfor corrugated tubeSchlemmer-Gigant

Material:Polyamide 6Characteristic features:• Flange with sealing slot and

4 fixing holes• 2 shell-halves for take up the outer

part of the corrugated tube• 1 fixing ringApplications:• machines and devices

für A B C D E F Art.-Nr. Art.-Nr. VENW mm mm mm mm mm mm schwarz grau Stck.for A B C D E F Art. no. Art. no. PUNW mm mm mm mm mm mm black grey pcs.

Anschlussarmaturenfür WellschlauchSchlemmer-Gigant

Material:Polyamid 6Kennzeichen:• Flansch mit Dichtnut und

4 Befestigungsbohrungen• 2 Halbschalen zur äußeren

Aufnahme des Wellschlauches• 1 FixierringAnwendungsbereiche:• Maschinen- und Apparatebau

PA 6 IP 54

Gerade/Straight70 112 95 60 80 44 - 3205576 3205575 a. A. /o. r.

100 145 126 74 108 50 - 3205581 3205580 a. A. /o. r.

90° Winkel /90° angle70 112 95 60 80 107 134 3205578 3205577 a. A. /o. r.

100 145 126 74 108 143 173 3205583 3205582 a. A. /o. r.

63

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 66: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Non-fibrousinsulating tubes

Material:PVCFeatures:• Tensile strength approx. 250 kg/cm2

• Breaking elongation 180 %• specific electrical resistance

1012 Ohm x cm• Dielectric strength 30 kV/mm• Dielectric constant:

50 Hz 4,0800 Hz 3,41 GHz 3,4

• Dielectric loss factor:800 Hz 0,0201 GHz 0,015

Applications:• For insulating electrical leads

I-Ø A-Ø Art.-Nr. VEca. mm ca. mm schwarz mI-Ø A-Ø Art. no. PUapprox. mm approx. mm black m

GewebeloseIsolierschläuche

Material:PVCEigenschaften:• Zugfestigkeit ca. 250 kg/cm2

• Bruchdehnung 180 %• spez. elektr. Widerstand

1012 Ohm x cm• Durchschlagfestigkeit 30 kV/mm• Dielektrizitätskonstante bei:

50 Hz 4,0800 Hz 3,41 GHz 3,4

PVC IP 65

0,5 0,9/ 1,0 1902016 auf Anfrage / on request0,8 1,2/ 1,3 1902024 auf Anfrage / on request1,0 1,4/ 1,5 1902032 2501,5 1,9/ 2,0 1902040 5002,0 2,4/ 2,5 1902059 5002,5 2,9/ 3,0 1902067 auf Anfrage / on request3,0 3,4/ 3,5 1902075 3003,5 3,9/ 4,0 1902083 2004,0 4,4/ 4,5 1902091 2004,5 4,9/ 5,0 1902105 auf Anfrage / on request5,0 5,4/ 5,5 1902113 2006,0 6,4/ 6,5 1902121 1507,0 7,4/ 7,5 1902130 1008,0 8,4/ 8,5 1902148 1009,0 9,4/ 9,5 1902156 auf Anfrage / on request

10,0 10,5/10,6 1902164 10011,0 11,5/11,6 1902172 10012,0 12,5/12,6 1902180 10013,0 13,5/13,6 1902199 auf Anfrage / on request14,0 14,5/14,6 1902202 5015,0 15,5/15,6 1902210 auf Anfrage / on request16,0 16,5/16,6 1902229 5018,0 18,6/18,7 1902237 5020,0 20,7/20,8 1902245 5022,0 22,8/22,9 1902253 5024,0 24,8/24,9 1902261 5025,0 25,8/25,9 1902270 5028,0 28,9/29,0 1902288 auf Anfrage / on request30,0 30,9/31,0 1902296 5032,0 32,9/33,0 1902300 5035,0 35,9/36,0 1902318 auf Anfrage / on request

andere Farben auf Anfrage / further colours on request

• Dielektrischer Verlustfaktor bei:800 Hz 0,0201 GHz 0,015

Anwendungsbereiche:• Isolierung elektrischer Leitungen

64

100°–

-25°

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 67: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

NW Art.-Nr. LW Art.-Nr. LW Art.-Nr. LW Art.-Nr. VEmm mm mm mm Ring

mNW Art. no. LW Art. no. LW Art. no. LW Art. no. PUmm mm mm mm ring

m

HohldrahtgeflechtTyp HG

Material:verzinkte StahldrähteDurchmesser: 0,20 - 0,30 mmKennzeichen:• Geflecht aus rundgeflochtenen

Drähten mit doppelter Kreuzungin den verschiedenen Flechtwinkeln.

• Anzahl der Drähte: 24 x 4 - 48 x 12

Stahl

5 0803057 14 0803146 23 0803235 32 0803324 1006 0803065 15 0803154 24 0803243 33 0803332 1007 0803073 16 0803162 25 0803251 34 0803340 1008 0803081 17 0803170 26 0803260 35 0803359 1009 0803090 18 0803189 27 0803278 36 0803367 10010 0803103 19 0803197 28 0803286 37 0803375 10011 0803111 20 0803200 29 0803294 38 0803383 10012 0803120 21 0803219 30 0803308 39 0803391 10013 0803138 22 0803227 31 0803316 40 0803405 100

Eigenschaften:• axial aufstauchbar• Geflecht kann durch Strecken

stramm aufgebracht werdenAnwendungsbereiche:• Stabiler und flexibler Schutz für

Kabel, Schläuche und Hohlkörper.• Entstör- und Abschirmschlauch,

Filter zur Zugentlastung

IP 50

Wire braidingType HG

Material:galvanized steel wireDiameter: 0,20 - 0,30 mmCharacteristics:• Braiding consisting of round brai-

ded wires with double crossing at various braiding angles.

• Number of wires: 24 x 4 - 48 x 12

Features:• braiding can be contracted axially• becomes tight by stretchingApplications:• Strong, flexible protection for

cables, tubes and hollow pieces• Anti-interference tube, filter for

traction relief

65

HohldrahtgeflechtTyp HG-PP

Material:PolypropylenrunddrähteDurchmesser: 0,25 mmKennzeichen:• Geflecht aus rundgeflochtenen

Drähten mit doppelter Kreuzungin den verschiedenen Flechtwinkeln.

PP

Eigenschaften:• axial aufstauchbar• Geflecht kann durch Strecken

stramm aufgebracht werdenAnwendungsbereiche:• Stabiler und flexibler Schutz für

Kabel, Schläuche und Hohlkörper• Filter zur Zugentlastung

IP 50

Wire braidingType HG-PP

Material:Polypropylene round wiringDiameter: 0,25 mmCharacteristics:• Braiding consisting of round brai-

ded wires with double crossing at various braiding angles.

Features:• braiding can be contracted axially• becomes tight by stretchingApplications:• Strong, flexible protection for

cables, tubes and hollow pieces• Filter for traction relief

100°–

-25°

NW Einsatzbereich Art.-Nr. VE NW Einsatzbereich Art.-Nr. VEmm mm Ring mm mm Ring

m mNW Range of Art. no. PU NW Range of Art. no. PUmm application ring mm application ring

mm m mm m

5 4 - 10 1903063 100 25 18 - 34 1903268 10010 7 - 14 1903080 100 30 28 - 42 1903306 5014 10 - 22 1903101 100 50 35 - 80 1903365 50

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 68: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Plastic spiral tape

Material:Polyethylene PE

Type D Stärke DI Breite W Ø Bündel Art.-Nr. Art.-Nr. VEmm mm mm mm transparent schwarz m

Type D Thickness DI Width W Ø Bundle Art. no. Art. no. PUmm mm mm mm transparent black m

Kunststoffspiralband

Material:Polyethylen PE

PE

SB - 6 5,0 6 7,0 4 - 50 1800206 1800256 10SB - 8 7,0 8 10,8 6 - 60 1800208 1800258 10SB - 10 5,5 10 11,4 7,5 - 60 1800210 1800260 10SB - 12 10,2 12 13,9 9 - 65 1800212 1800262 10SB - 15 13,0 15 15,0 12 - 70 1800215 1800265 10SB - 19 16,4 19 18,2 15 - 100 1800219 1800269 10SB - 24 21,0 24 19,6 20 - 130 1800224 1800274 10

66

Schu

tzsc

hlau

chsy

stem

eTu

be P

rote

ctio

n Sy

stem

s

Page 69: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

67

Kabelverschraubungen Cable glands

Definition Kabelverschraubungen mit metrischem Gewinde EN 50262

Kabelverschraubung „SCHLEMMER-TEC“

Kunststoff

Messing

Kabelverschraubung WADI-TEC

Kunststoff PS

PA 6 GFK

PVDF

Messing

Edelstahl

ATEX Kabelverschraubung

Kabelverschraubung für den EMV-Schutz

Kabelverschraubung mit Zugentlastung

Kabelverschraubung mit Zugentlastung und Knickschutz

Type: Syntec/KS

Kabelverschraubungen

Seite/page

Definition of Cable glands with metric thread EN 50262 68

Cable gland „SCHLEMMER-TEC“

Plastic 70-73

Brass 74-77

Cable gland WADI-TEC

Plastic PS 82

PA 6 GFK 83-91

PVDF 92

Brass 93-100

Stainles steel 101

ATEX Cable gland 103-111

Cable gland for EMC protection 113-117

Cable gland with traction relief 122-124

Cable gland with traction relief and kink protection

Type: Syntec/KS 127

Cable glands 128-138

Page 70: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Kabelverschraubungen mit metrischem Gewinde EN 50 262

Hinweis:

Bei der Planung von Neukonstruktionen von Anlagen, Gehäusen, Maschinen oderGeräten ist die neue EN 50 262 für metrische Kabelverschraubungen vorgeschrieben!

Wir bieten Ihnen . . .

ein komplettes Sortiment von Kabelverschraubungen, das technisch auf die neueEN 50 262 ausgelegt wurde. Sie erhalten aber auch weiterhin Gewinde von PG 7 -PG 48 für bestehende Anlagen.

Die wichtigste Änderung an Kabelverschraubungen

An Stelle der bisher gebräuchlichen PG-Anschlußgewinde sind neue ISO-metrischeFeingewinde nach EN 60 423 Tabelle 1 normiert worden.

Cable glands with metric threadacc. to EN 50262

The ten year transition period for the existing standards for PG threads, DIN 46320part 1 to 4 and DIN 40430, ran out in 1999.

The CENELEC European committee for electrotechnical standards has prepared anew standard for metric cable glands.

When this European standard EN 50262 „Metric cable glands for electrical installations“ will be in force, the metric thread ISO „fine“ will be introduced for cable glands.

Die zehnjährige Übergangsfrist für die bisher bekannten Baunormen für PG-Gewinde DIN 46 320 Teil 1 bis 4 sowie die DIN 40 430 lief Ende 1999 aus.

Das Europäische Komitee für Elektrotechnische Normung CENELEC hat eine neue Norm für metrische Kabelverschraubungen erarbeitet.

Mit Inkrafttreten dieser Euro-Norm EN 50 262„Metrische Kabelverschraubungen für elektrische Installationen“ erfolgt die europaweite Einführung des metrischen ISO-Feingewindes bei Kabelverschraubungen.

Most important modification to cable glands:

Metric fine threads to EN 60423 Table 1 have been standardized in place of the PGconnecting thread formerly used.

Note:

When planing new constructions of devices, casing, machinery or equipment thenew EN 50262 is prescribed.

Schlemmer presents you . . .

a complete range of cable glands, which has been technical designed to the new EN 50262. For the existing devices the threads PG 7 - PG 48 are still available.

NenngrößeNominal size 12 16 20 25 32 40 50 63 75

GewindegrößeThread size M 12 M 16 M 20 M 25 M 32 M 40 M 50 M 63 M 75

SteigungPitch 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5

Außen-Ø in mmExternal dia. in mm 12 16 20 25 32 40 50 63 75

Ø der Montagebohrung in mmDia. of assembly bore in mm 12,5 16,5 20,5 25,5 32,5 40,5 50,5 63,5 75,5

68

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 71: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

KabelverschraubungSCHLEMMER-TECmit integrierter Zugentlastung

IP 68 � � �

SCHLEMMER-TEC Kunststoff PA 6 / SCHLEMMER-TEC plastic PA 6SCHLEMMER-TEC Messing / SCHLEMMER-TEC brass

Cable glandSCHLEMMER-TECwith integrated traction relief

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

MaterialMaterial

PA 6 PolyamidPolyamide

MessingBrass

Met

risch

Met

ric

PG PG NPT

NPT

kurz

es G

ewin

de

shor

t thr

ead

lang

es G

ewin

de

long

thre

ad

redu

zier

ter

Dich

tein

satz

redu

ctio

n se

al in

sert

• •• • •

• •• • •• •• • •

• •• • •

• •• • •• •• • •

• •• • •• •• • •

• •• • •

Ausführungen / Versions

69

Page 72: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich E SW Art.-Nr. Art.-Nr. Art.-Nr. VEmm mm mm lichtgrau silbergrau tiefschwarz Stck.

RAL 7035 RAL 7001 RAL 9005Outer thread Clamping range E SW Art. no. Art. no. Art. no. PU

mm mm mm light grey silver grey jet black pcs.RAL 7035 RAL 7001 RAL 9005

KabelverschraubungSCHLEMMER-TECPolyamidPG-Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid 6• 2: Dichtung: NeoprenKennzeichen:• PG-GewindeEigenschaften:• optimale Zugentlastung durch

Klemmlamellen

Cable glandSCHLEMMER-TECPolyamidePG-thread

Material:• 1/3: Gland element/Cap nut:

Polyamide 6• 2: Seal: NeopreneCharacteristics:• PG-threadFeatures:• maximum traction relief through

clamp lamella

PG 7 2,5-6,5 8 15 5308707 5308070 5308507 100PG 9 2,5-8 8 19 5308709 5308097 5308509 50PG 11 3,5-10 8 22 5308711 5308119 5308511 50PG 13,5 5-12 9 24 5308713 5308135 5308513 50PG 16 7-14 10 27 5308716 5308160 5308516 50PG 21 9-18 11 33 5308721 5308216 5308521 25PG 29 14-25 11 42 5308729 5308291 5308529 20PG 36 18-32 13 53 5308736 5308364 5308536 10PG 42 24-38,5 13 60 5308737 5308365 5308537 5PG 48 35-48 14 70 5308738 5308366 5308538 5

mit Reduzier-Dichteinsatz / with reduction seal insertPG 7 RED 1,5-5 8 15 5309107 5309007 5309207 100PG 9 RED 1,5-6 8 19 5309109 5309009 5309209 50PG 11 RED 2-7 8 22 5309111 5309011 5309211 50PG 13,5 RED 3-9 9 24 5309113 5309013 5309213 50PG 16 RED 5-12 10 27 5309116 5309016 5309216 50PG 21 RED 7-16 11 33 5309121 5309021 5309221 25PG 29 RED 11-21 11 42 5309129 5309029 5309229 20PG 36 RED 13-26 13 53 5309136 5309036 5309236 10PG 42 RED 17-31 13 60 5309142 5309042 5309242 5PG 48 RED 26-39 14 70 5309148 5309048 5309248 5

• Abdichtung zum Gehäuse durchDichtungslippe

• Trapezgewinde für hohes Anzugs-moment garantiert festen unddauerhaften Sitz der Hutmutter

• lieferbar auch mit Reduziereinsatz• gas- und wasserdichtAnwendungsbereiche:• Maschinen-, Gerätebau

• seal-tight to enclosure rack throughsealing ring

• trapezoidal thread with high torqueguarantees tight and permanent fitof the cap nut

• also available with reduction insert• gas and water-tightApplications:• Machines and devices

PA 6100°

–-25°

IP 685 bar

Passende Gegenmuttern Seite 140Passende Flachkopfabdichtung Seite 78

� � �

PG-Gewinde / PG-thread

Suitable lock nuts page 140Suitable flat head sealing page 78

70

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 73: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich E SW Art.-Nr. Art.-Nr. Art.-Nr. VEmm mm mm lichtgrau silbergrau tiefschwarz Stck.

RAL 7035 RAL 7001 RAL 9005Outer thread Clamping range E SW Art. no. Art. no. Art. no. PU

mm mm mm light grey silver grey jet black pcs.RAL 7035 RAL 7001 RAL 9005

KabelverschraubungSCHLEMMER-TECPolyamidmetrisches Gewinde, kurz

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid 6• 2: Dichtung: NeoprenKennzeichen:• metrisches Gewinde, kurzEigenschaften:• optimale Zugentlastung durch

Klemmlamellen

Cable glandSCHLEMMER-TECPolyamidemetric thread, short

Material:• 1/3: Gland element/Cap nut:

Polyamide 6• 2: Seal: NeopreneCharacteristics:• metric thread, short Features:• maximum traction relief through

clamp lamella

M 12 x 1,5 2,5-6,5 8 15 5308950 5308930 5308940 100M 16 x 1,5/9 2,5-8 10 19 5308958 5308938 5308948 50M 16 x 1,5/11 3,5-10 10 22 5308951 5308931 5308941 50M 20 x 1,5/13 5-12 10 24 5308959 5308939 5308949 50M 20 x 1,5/16 7-14 10 27 5308952 5308932 5308942 50M 25 x 1,5/16 7-14 10 27 5308960 5308961 5308962 50M 25 x 1,5/21 9-18 10 33 5308953 5308933 5308943 25M 32 x 1,5 14-25 10 42 5308954 5308934 5308944 20M 40 x 1,5 18-32 10 53 5308955 5308935 5308945 10M 50 x 1,5 24-38,5 12 60 5308956 5308936 5308946 5M 63 x 1,5 35-48 12 70 5308957 5308937 5308947 5

mit Reduzier-Dichteinsatz / with reduction seal insertM 12 x 1,5 RED 1,5-5 8 15 5309612 5309512 5309712 100M 16 x 1,5/9 RED 1,5 6 10 19 5309615 5309515 5309715 50M 16 x 1,5/11 RED 2-7 10 22 5309616 5309516 5309716 50M 20 x 1,5/13 RED 3-9 10 24 5309619 5309519 5309719 50M 20 x 1,5/16 RED 5-12 10 27 5309620 5309520 5309720 50M 25 x 1,5/16 RED 5-12 10 27 5309624 5309524 5309724 50M 25 x 1,5/21 RED 7-16 10 33 5309625 5309525 5309725 25M 32 x 1,5 RED 11-21 10 42 5309632 5309532 5309732 20M 40 x 1,5 RED 13-26 10 53 5309640 5309540 5309740 10M 50 x 1,5 RED 17-31 12 60 5309650 5309550 5309750 5M 63 x 1,5 RED 26-39 12 70 5309663 5309563 5309763 5

• Abdichtung zum Gehäuse durchDichtungslippe

• Trapezgewinde für hohes Anzugs-moment garantiert festen unddauerhaften Sitz der Hutmutter

• lieferbar auch mit Reduziereinsatz• gas- und wasserdichtAnwendungsbereiche:• Maschinen-, Gerätebau

• seal-tight to enclosure rack throughsealing ring

• trapezoidal thread with high torqueguarantees tight and permanent fitof the cap nut

• also available with reduction insert• gas and water-tightApplications:• Machines and devices

PA 6 EN 50262100°

–-25°

IP 685 bar

Passende Gegenmuttern Seite 140Passende Flachkopfabdichtung Seite 78

Metrisches Gewinde, kurz / metric thread, short

� � �

Suitable lock nuts page 140Suitable flat head sealing page 78

71

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 74: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich E SW Art.-Nr. Art.-Nr. Art.-Nr. VEmm mm mm lichtgrau silbergrau tiefschwarz Stck.

RAL 7035 RAL 7001 RAL 9005Outer thread Clamping range E SW Art. no. Art. no Art. no. PU

mm mm mm light grey silvergrey jet black pcs.RAL 7035 RAL 7001 RAL 9005

KabelverschraubungSCHLEMMER-TECPolyamidmetrisches Gewinde, lang

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid 6• 2: Dichtung: NeoprenKennzeichen:• metrisches Gewinde, langEigenschaften:• optimale Zugentlastung durch

Klemmlamellen

Cable glandSCHLEMMER-TECPolyamidemetric thread, long

Material:• 1/3: Gland element/Cap nut:

Polyamide 6• 2: Seal: NeopreneCharacteristics:• metric thread, longFeatures:• maximum traction relief through

clamp lamella

M 12 x 1,5 2,5-6,5 15 15 5307212 5307012 5307112 100M 16 x 1,5/9 2,5-6,5 15 19 5307217 5307017 5307117 50M 16 x 1,5/11 3,5-10 15 22 5307216 5307016 5307116 50M 20 x 1,5/13 5-12 15 24 5307221 5307021 5307121 50M 20 x 1,5/16 7-14 15 27 5307220 5307020 5307120 25M 25 x 1,5/16 7-14 15 27 5307226 5307026 5307126 25M 25 x 1,5/21 9-18 15 33 5307225 5307025 5307125 25M 32 x 1,5 14-25 15 42 5307232 5307032 5307132 20M 40 x 1,5 18-32 16 53 5307240 5307040 5307140 10M 50 x 1,5 24-38,5 16 60 5307250 5307050 5307150 5M 63 x 1,5 35-48 16 70 5307263 5307063 5307163 5

mit Reduzier-Dichteinsatz / with reduction seal insertM 12 x 1,5 RED 1,5-5 15 15 5307712 5307512 5307612 100M 16 x 1,5/9 RED 1,5-6 15 19 5307717 5307517 5307617 50M 16 x 1,5/11 RED 2-7 15 22 5307716 5307516 5307616 50M 20 x 1,5/13 RED 3-9 15 24 5307721 5307521 5307621 50M 20 x 1,5/16 RED 5-12 15 27 5307720 5307520 5307620 25M 25 x 1,5/16 RED 5-12 15 27 5307726 5307526 5307626 25M 25 x 1,5/21 RED 7-16 15 33 5307725 5307525 5307625 25M 32 x 1,5 RED 11-21 15 42 5307732 5307532 5307632 20M 40 x 1,5 RED 13-26 16 53 5307740 5307540 5307640 10M 50 x 1,5 RED 17-31 16 60 5307750 5307550 5307650 5M 63 x 1,5 RED 26-39 16 70 5307763 5307563 5307663 5

• Abdichtung zum Gehäuse durchDichtungslippe

• Trapezgewinde für hohes Anzugs-moment garantiert festen unddauerhaften Sitz der Hutmutter

• lieferbar auch mit Reduziereinsatz• gas- und wasserdichtAnwendungsbereiche:• Maschinen-, Gerätebau

• seal-tight to enclosure rack throughsealing ring

• trapezoidal thread with high torqueguarantees tight and permanent fitof the cap nut

• also available with reduction insert• gas and water-tightApplications:• Machines and devices

PA 6100°

–-25°

IP 685 bar

Passende Gegenmuttern Seite 140Passende Flachkopfabdichtung Seite 78

Metrisches Gewinde, lang / metric thread, long

EN 50262� � �

Suitable lock nuts page 140Suitable flat head sealing page 78

72

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 75: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich E SW Art.-Nr. Art.-Nr. Art.-Nr. VEmm mm mm lichtgrau silbergrau tiefschwarz Stck.

RAL 7035 RAL 7001 RAL 9005Outer thread Clamping range E SW Art. no. Art. no. Art. no. PU

mm mm mm light grey silver grey jet black pcs.RAL 7035 RAL 7001 RAL 9005

KabelverschraubungSCHLEMMER-TECPolyamidNPT-Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid 6• 2: Dichtung: NeoprenKennzeichen:• NPT-GewindeEigenschaften:• optimale Zugentlastung durch

Klemmlamellen

Cable glandSCHLEMMER-TECPolyamideNPT-thread

Material:• 1/3: Gland element/Cap nut:

Polyamide 6• 2: Seal: NeopreneCharacteristics:• NPT-threadFeatures:• maximum traction relief through

clamp lamella

NPT 3/8" 2,5-8 11 19 5308900 5308910 5308920 50NPT 1/2" 5-12 14 24 5308901 5308911 5308921 50NPT 3/4" 9-18 15 33 5308902 5308912 5308922 20NPT 1" 14-25 18 42 5308903 5308913 5308923 20

mit Reduzier-Dichteinsatz / with reduction seal insertNPT 3/8" RED 1,5-6 11 19 5308904 5308914 5308924 50NPT 1/2" RED 3-9 14 24 5308905 5308915 5308925 50NPT 3/4" RED 7-16 15 33 5308906 5308916 5308926 20NPT 1" RED 11-21 18 42 5308907 5308917 5308927 20

• Abdichtung zum Gehäuse durchDichtungslippe

• Trapezgewinde für hohes Anzugs-moment garantiert festen unddauerhaften Sitz der Hutmutter

• lieferbar auch mit Reduziereinsatz• gas- und wasserdichtAnwendungsbereiche:• Maschinen-, Gerätebau

• seal-tight to enclosure rack throughsealing ring

• trapezoidal thread with high torqueguarantees tight and permanent fitof the cap nut

• also available with reduction insert• gas and water-tightApplications:• Machines and devices

PA 6100°

–-25°

IP 685 bar

Passende Gegenmuttern Seite 140

NPT-Gewinde / NPT-thread

� � �

Suitable lock nuts page 140

73

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 76: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich E SW Art.-Nr. VEmm mm mm Stck.

Outer thread Clamping range E SW Art. no. PUmm mm mm pcs.

KabelverschraubungSCHLEMMER-TECMessing vernickeltPG-Gewinde, kurz

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Klemmkörper: PA 6• 4: Dichtring für Außengewinde:

Nitril• 5: Dichtung: NeoprenKennzeichen:• PG-Gewinde, kurz

Cable glandSCHLEMMER-TECnickel-plated brassPG-thread, short

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Clamping shell: PA 6• 4: Sealing-Ring for outer thread:

Nitril• 5: Seal: NeopreneCharacteristics:• PG-thread, short

PG 7 2,5-6,5 5 14 4220307 50PG 9 4-9,5 6 17 4220309 50PG 11 6-11,5 6 20 4220311 50PG 13 7-13 6,5 22 4220313 50PG 16 8-15 6,5 24 4220316 50PG 21 11-19 7 30 4220321 20PG 29 16-26 8 40 4220329 20PG 36 22-34,5 9 50 4220336 10PG 42 27-40 10 58 4220342 5PG 48 35-48 10 65 4220348 5

mit Reduzier-Dichteinsatz / with reduction seal insertPG 7 RED 1,5-5 5 14 4220351 50PG 9 RED 2,5-7 6 17 4220352 50PG 11 RED 3-8,5 6 20 4220353 50PG 13 RED 4-10 6,5 22 4220354 50PG 16 RED 5-12 6,5 24 4220355 50PG 21 RED 8-16 7 30 4220356 20PG 29 RED 11-21 8 40 4220357 20PG 36 RED 16-28 9 50 4220358 10PG 42 RED 22-34 10 58 4220359 5PG 48 RED 28-40 10 65 4220360 5

Eigenschaften:• optimale Zugentlastung durch

Klemmlamellen• lieferbar auch mit Reduziereinsatz• gas- und wasserdicht• zusätzlicher Dichtring (4) aus Nitril

am Verschraubungskörper

Features:• maximum traction relief through

clamp lamella• also available with reduction insert• gas and water-tight• additional Nitril sealing-ring (4) on

the gland element

MS100°

–-25°

IP 68

Passende Gegenmuttern Seite 143Passende Flachkopfabdichtung Seite 78

PG-Gewinde, kurz / PG-thread, short

Suitable lock nuts page 143Suitable flat head sealing page 78

74

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 77: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich E SW Art.-Nr. VEmm mm mm Stck.

Outer thread Clamping range E SW Art. no. PUmm mm mm pcs.

KabelverschraubungSCHLEMMER-TECMessing vernickeltPG-Gewinde, lang

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Klemmkörper: PA 6• 4: Dichtring für Außengewinde:

Nitril• 5: Dichtung: NeoprenKennzeichen:• PG-Gewinde, lang

Cable glandSCHLEMMER-TECnickel-plated brassPG-thread, long

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Clamping shell: PA 6• 4: Sealing-Ring for outer thread:

Nitril• 5: Seal: NeopreneCharacteristics:• PG-thread, long

PG 7 2,5-6,5 15 14 4220407 50PG 9 4-9,5 15 17 4220409 50PG 11 6-11,5 15 20 4220411 50PG 13 7-13 15 22 4220413 50PG 16 8-15 15 24 4220416 50PG 21 11-19 15 30 4220421 20PG 29 16-26 15 40 4220429 20PG 36 22-34,5 15 50 4220436 10PG 42 27-40 15 58 4220442 5PG 48 35-48 15 65 4220448 5

mit Reduzier-Dichteinsatz / with reduction seal insertPG 7 RED 1,5-5 15 14 4220451 50PG 9 RED 2,5-7 15 17 4220452 50PG 11 RED 3-8,5 15 20 4220453 50PG 13 RED 4-10 15 22 4220454 50PG 16 RED 5-12 15 24 4220455 50PG 21 RED 8-16 15 30 4220456 20PG 29 RED 11-21 15 40 4220457 20PG 36 RED 16-28 15 50 4220458 10PG 42 RED 22-34 15 58 4220459 5PG 48 RED 28-40 15 65 4220460 5

Eigenschaften:• optimale Zugentlastung durch

Klemmlamellen• lieferbar auch mit Reduziereinsatz• gas- und wasserdicht• zusätzlicher Dichtring (4) aus Nitril

am Verschraubungskörper

Features:• maximum traction relief through

clamp lamella• also available with reduction insert• gas and water-tight• additional Nitril sealing-ring (4) on

the gland element

MS100°

–-25°

IP 68

Passende Gegenmuttern Seite 143Passende Flachkopfabdichtung Seite 78

PG-Gewinde, lang / PG-thread, long

Suitable lock nuts page 143Suitable flat head sealing page 78

75

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 78: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich E SW Art.-Nr. VEmm mm mm Stck.

Outer thread Clamping range E SW Art. no. PUmm mm mm pcs.

KabelverschraubungSCHLEMMER-TECMessing vernickeltmetrisches Gewinde, kurz

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Klemmkörper: PA 6• 4: Dichtring für Außengewinde:

Nitril• 5: Dichtung: NeoprenKennzeichen:• metrisches Gewinde, kurz

Cable glandSCHLEMMER-TECnickel-plated brassmetric thread, short

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Clamping shell: PA 6• 4: Sealing-Ring for outer thread:

Nitril• 5: Seal: NeopreneCharacteristics:• metric thread, short

M 12 x 1,5 2,5-6,5 5 14 4220612 100M 16 x 1,5 4-9,5 5 17 4220616 50M 20 x 1,5 7-13 6 22 4220620 50M 25 x 1,5 8-16 7 27 4220625 25M 32 x 1,5 11-21 8 34 4220632 20M 40 x 1,5 15-27 8 42 4220640 10M 50 x 1,5 22-35 9 55 4220650 5M 63 x 1,5 35-48 10 65 4220663 5

mit Reduzier-Dichteinsatz / with reduction seal insertM 12 x 1,5 RED 1,5-5 5 14 4220712 100M 16 x 1,5 RED 2,5-7 5 17 4220716 50M 20 x 1,5 RED 4-10 6 22 4220720 50M 25 x 1,5 RED 5-13 7 27 4220725 25M 32 x 1,5 RED 7-17 8 34 4220732 20M 40 x 1,5 RED 10-22 8 42 4220740 10M 50 x 1,5 RED 17-29 9 55 4220750 5M 63 x 1,5 RED 28-40 10 65 4220763 5

Eigenschaften:• optimale Zugentlastung durch

Klemmlamellen• lieferbar auch mit Reduziereinsatz• gas- und wasserdicht• zusätzlicher Dichtring aus Nitril (4)

am Verschraubungskörper

Features:• maximum traction relief through

clamp lamella• also available with reduction insert• gas and water-tight• additional Nitril sealing-ring (4) on

gland element

MS EN 50262100°

–-25°

IP 68

Passende Gegenmuttern Seite 143Passende Flachkopfabdichtung Seite 78

Metrisches Gewinde, kurz / metric thread, short

Suitable lock nuts page 143Suitable flat head sealing page 78

76

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 79: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

77

Aussengewinde Klemmbereich E SW Art.-Nr. VEmm mm mm Stck.

Outer thread Clamping range E SW Art. no. PUmm mm mm pcs.

KabelverschraubungSCHLEMMER-TECMessing vernickeltmetrisches Gewinde, lang

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Klemmkörper: PA 6• 4: Dichtung für Außengewinde:

Nitril• 5: Dichtung: NeoprenKennzeichen:• metrisches Gewinde, lang

Cable glandSCHLEMMER-TECnickel-plated brassmetric thread, long

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Clamping shell: PA 6• 4: Sealing-Ring for outer thread:

Nitril• 5: Seal: NeopreneCharacteristics:• metric thread, long

M 12 x 1,5 2,5-6,5 15 14 4220670 100M 16 x 1,5 4-9,5 15 17 4220671 50M 20 x 1,5 7-13 15 22 4220673 50M 25 x 1,5 8-16 15 27 4220675 25M 32 x 1,5 11-21 15 34 4220677 20M 40 x 1,5 15-27 15 42 4220678 10M 50 x 1,5 22-35 15 55 4220679 5M 63 x 1,5 35-48 15 65 4220680 5

mit Reduzier-Dichteinsatz / with reduction seal insertM 12 x 1,5 RED 1,5-5 15 14 4220770 100M 16 x 1,5 RED 2,5-7 15 17 4220771 50M 20 x 1,5 RED 4-10 15 22 4220773 50M 25 x 1,5 RED 5-13 15 27 4220775 25M 32 x 1,5 RED 7-17 15 34 4220777 20M 40 x 1,5 RED 10-22 15 42 4220778 10M 50 x 1,5 RED 17-29 15 55 4220779 5M 63 x 1,5 RED 28-40 15 65 4220780 5

Eigenschaften:• optimale Zugentlastung durch

Klemmlamellen• lieferbar auch mit Reduziereinsatz• gas- und wasserdicht• zusätzlicher Dichtring aus Nitril (4)

am Verschraubungskörper

Features:• maximum strain relief through

clamp lamella• also available with reduction insert• gas and water-tight• additional Nitril sealing-ring (4)

on the gland element

MS EN 50262100°

–-25°

IP 68

Passende Gegenmuttern Seite 143Passende Flachkopfabdichtung Seite 78

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Metrisches Gewinde, lang / metric thread, long

Suitable lock nuts page 143Suitable flat head sealing page 78

Page 80: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

passend für Ø A Ø B C L Art.-Nr. VEmm mm mm mm Stck.

suitable for Ø A Ø B C L Art. no. PUmm mm mm mm pcs.

FlachkopfabdichtungEPDM

Material:EPDM, schwarz

PG 9; PG 11; M 16 11,0 8,0 17,0 20,0 7217701 100PG 13,5; PG 16; M 20 15,0 12,0 18,0 21,0 7217702 100PG 16; M 25 18,0 15,0 19,0 22,0 7217703 100

EPDM

Flat head sealingEPDM

Material:EPDM, black

78

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 81: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

79

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 82: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

GesamtübersichtWADI-TEC – die flexible (universelle)KabelverschraubungEine Verschraubung für alle Anwendungen!

KUNSTSTOFF / PLASTICPS, PA 6, PVDF

MESSING / BRASS EDELSTAHL / STAINLESS STEEL

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Complete overviewWADI-TEC – the flexible (universal)cable glandOnly one gland for all applications!

IP 68

Kuns

tsto

ffPl

astic

MessingBrass

EdelstahlStainless steel

MaterialMaterial

PolystyrolPolysterene

PA 6 Polyamid25% glasfaserverstärktPolyamide 25%glassfibre reinforcedPVDF

Met

risch

Met

ric

PG PG NPT

NPT

kurz

es G

ewin

de

shor

t thr

ead

lang

es G

ewin

de

long

thre

ad

Dupl

o

Dupl

o

rund

roun

d

ecki

g

angu

lar

oval

oval

kurz

e Di

chtu

ng,E

inlo

ch

shor

t sea

ling,

one

hole

lang

e Di

chtu

ng,E

inlo

ch

long

sea

ling,

one

hole

ECA

Klem

mkä

fig

ECA

clam

ping

rin

g

FlachkabelFlat seal

• • • • • • •• • •

• • • • • • • •• • •

• • • • • • • • •• • • • • • • •

• • • • • • • • •• • • • •

• • • • •• • • • • • • • •• • • • • • • • •

• • • • • • • • •• • • • • • • •• • • • • • • • •

• • • • • • • • •

80

Ausführungen / Versions

Page 83: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

81

ÜbersichtWADI-TEC Verschraubungen

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

OverviewWADI-TEC cable glands

IP 68

EdelstahlStainless steel

MessingBrass

PVDFPVDF

PolyamidPolyamide

PolystyrolPolysterene

Lange Dichtung

long sealing

Duplo

Duplo

Flachdichtung

flat sealing

Kurze Dichtung

short sealing

Klemmkäfig

clamping ring

Page 84: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

82

Aussengewinde Klemmbereich Art.-Nr. Art.-Nr. Art.-Nr. E SW L VEmm lichtgrau silbergrau tiefschwarz mm mm mm Stck.

RAL 7035 RAL 7001 RAL 9005Outer thread Clamping range Art. no. Art. no. Art. no. E SW L PU

mm light grey silver grey jet black mm mm mm pcs.RAL 7035 RAL 7001 RAL 9005

KabelverschraubungWADI-TECPolystyrolkurze Dichtung

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polystyrol• 2: Dichtung: TefablocKennzeichen:• PG/metrisches Gewinde• kurzes/langes Gewinde• kurze Dichtung

Cable glandWADI-TECPolystyreneshort seal

PG, kurzes Gewinde / PG, short threadPG 7 3-6 5210107 5210070 5210507 8 15 31 50PG 9 4,5-8 5210109 5210097 5210509 8 19 32 50PG 11 5,5-10,5 5210111 5210119 5210511 8 22 35 50PG 13,5 7-12 5210113 5210135 5210513 9 24 36 50PG 16 9-14 5210116 5210160 5210516 10 27 40 50PG 21 11,5-18 5210121 5210216 5210521 11 33 44 20PG 29 16-24,5 5210129 5210291 5210529 12 42 55 20

PG, langes Gewinde / PG, long threadPG 7 3-6 5210149 5210249 5210549 15 15 38 50PG 9 4,5-8 5210150 5210250 5210550 15 19 39 50PG 11 5,5-10,5 5210151 5210251 5210551 15 22 42 50PG 13,5 7-12 5210152 5210252 5210552 15 24 42 50PG 16 9-14 5210153 5210253 5210553 15 27 45 50PG 21 11,5-18 5210154 5210254 5210554 15 33 49 20PG 29 16-24,5 5210155 5210255 5210555 15 42 58 20

metrisch, kurzes Gewinde / metric, short threadM 16 x 1,5 4,5-8 5210816 5210316 5210616 8 19 32 50M 20 x 1,5/13 7-12 5210820 5210320 5210620 9 24 36 50M 20 x 1,5/16 9-14 5210821 5210321 5210621 10 27 40 50M 25 x 1,5 11,5-18 5210825 5210325 5210625 11 33 44 20M 32 x 1,5 16-24,5 5210832 5210332 5210632 12 42 55 20

metrisch, langes Gewinde / metric, long threadM 16 x 1,5 4,5-8 5210837 5210737 5210637 15 19 39 50M 20 x 1,5/13 7-12 5210838 5210738 5210638 15 24 42 50M 20 x 1,5/16 9-14 5210839 5210739 5210639 15 27 45 50M 25 x 1,5 11,5-18 5210840 5210740 5210640 15 33 48 20M 32 x 1,5 16-24,5 5210841 5210741 5210641 15 42 58 20

Weitere Dichteinsätze auf Anfrage / further sealing inserts on request

Eigenschaften:• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

Material:• 1/3: Gland element/Cap nut:

Polystyrene• 2: Seal: TefablocCharacteristics:• PG/metric thread• short/long thread• short seal

PS70°

–-20°

IP 68

Hinweis: Fettgedruckte Artikel auf LagerPassende Gegenmuttern Seite 142Hinweis: Gewindegrößen PG 36-48 und M 40 x 1,5-63 x 1,5 siehe PA Seite 84

Features:• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

Note: Boldfaced articles on stockSuitable lock nuts page 142Note: for thread sizes PG 36-48 and M 40 x 1,5-63 x 1,5 see PA page 84

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 85: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

83SchlemmerKABELSCHUTZSYSTEME

Aussengewinde Klemmbereich Art.-Nr. Art.-Nr. Art.-Nr. E SW L VEmm lichtgrau silbergrau tiefschwarz mm mm mm Stck.

RAL 7035 RAL 7001 RAL 9005Outer thread Clamping range Art. no. Art. no. Art. no. E SW L PU

mm light grey silver grey jet black mm mm mm pcs.RAL 7035 RAL 7001 RAL 9005

KabelverschraubungWADI-TECPolyamidECA-Klemmring

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid PA 6, 25 % glasfaserverstärkt

• 2: ECA-Klemmring: Polycarbonat• 4: Dichtung: TefablocKennzeichen:• PG/metrisches Gewinde• kurzes/langes Gewinde• ECA-Klemmring

Cable glandWADI-TECPolyamideECA-clamping ring

PG, kurzes Gewinde / PG, short threadPG 7 3-6 5313610 5313600 5313620 8 15 31 50PG 9 5-8 5313611 5313601 5313621 8 19 32 50PG 11 6-10 5313612 5313602 5313622 8 22 35 50PG 13,5 8-12 5313613 5313603 5313623 9 24 36 50PG 16 10-14 5313614 5313604 5313624 10 27 40 50PG 21 11,5-18 5313615 5313605 5313625 11 33 44 20PG 29 15-24 5313616 5313606 5313626 12 42 55 20PG, langes Gewinde / PG, long threadPG 7 3-6 5313710 5313700 5313720 15 15 38 50PG 9 5-8 5313711 5313701 5313721 15 19 39 50PG 11 6-10 5313712 5313702 5313722 15 22 42 50PG 13,5 8-12 5313713 5313703 5313723 15 24 42 50PG 16 10-14 5313714 5313704 5313724 15 27 45 50PG 21 11,5-18 5313715 5313705 5313725 15 33 49 20PG 29 15-24 5313716 5313706 5313726 15 42 58 20PG 36 24-34 5313717 5313707 5313727 18 55 65 10PG 42 34-42 5313718 5313708 5313728 18 65 67 10PG 48 40-48 5313719 5313709 5313729 18 70 67 10metrisch, kurzes Gewinde / metric, short threadM 16 x 1,5 5-8 5313640 5313630 5313650 8 19 32 50M 20 x 1,5/13 8-12 5313641 5313631 5313651 9 24 36 50M 20 x 1,5/16 10-14 5313644 5313634 5313654 9 27 39 50M 25 x 1,5 11,5-18 5313642 5313632 5313652 11 33 44 20M 32 x 1,5 15-24 5313643 5313633 5313653 12 42 55 20metrisch, langes Gewinde / metric, long threadM 16 x 1,5 5-8 5313670 5313660 5313680 15 19 39 50M 20 x 1,5/13 8-12 5313671 5313661 5313681 15 24 42 50M 20 x 1,5/16 10-14 5313677 5313667 5313687 15 27 45 50M 25 x 1,5 11,5-18 5313672 5313662 5313682 15 33 48 20M 32 x 1,5 15-24 5313673 5313663 5313683 15 42 58 20M 40 x 1,5 24-34 5313674 5313664 5313684 15 55 63 10M 50 x 1,5 34-42 5313675 5313665 5313685 15 65 65 10M 63 x 1,5 40-48 5313676 5313666 5313686 15 70 65 5

Eigenschaften:• Zugentlastung durch Klemmring• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

PA 6GFK

120°–

-30°IP 68

Hinweis: Fettgedruckte Artikel auf LagerPassende Gegenmuttern Seite 140

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Material:• 1/3: Gland element/Cap nut:

Polyamide PA 6, 25 % glassfiberreinforced

• 2: ECA-Clamping-Ring: Polycarbonate

• 4: Seal: TefablocCharacteristics:• PG/metric thread• short/long thread• ECA clamping ring

Features:• traction relief through clamping ring• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

Note: Boldfaced articles on stockSuitable lock nuts page 140

Page 86: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

84 SchlemmerKABELSCHUTZSYSTEME

Aussengewinde Klemmbereich Art.-Nr. Art.-Nr. Art.-Nr. E SW L VEmm lichtgrau silbergrau tiefschwarz mm mm mm Stck.

RAL 7035 RAL 7001 RAL 9005Outer thread Clamping range Art. no. Art. no. Art. no. E SW L PU

mm light grey silver grey jet black mm mm mm pcs.RAL 7035 RAL 7001 RAL 9005

KabelverschraubungWADI-TECPolyamidkurze Dichtung

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid PA 6, 25 % glasfaserverstärkt

• 2: Dichtung: TefablocKennzeichen:• PG/metrisches Gewinde• kurzes/langes Gewinde• kurze Dichtung

Cable glandWADI-TECPolyamideshort seal

PG, kurzes Gewinde / PG, short threadPG 7 3-6 5211107 5211207 5211307 8 15 31 50PG 9 4,5-8 5211109 5211209 5211309 8 19 32 50PG 11 6,5-10,5 5211111 5211211 5211311 8 22 35 50PG 13,5 7-12 5211113 5211213 5211313 9 24 36 50PG 16 9-14 5211116 5211216 5211316 10 27 40 50PG 21 11,5-18 5211121 5211221 5211321 11 33 44 20PG 29 15-24,5 5211129 5211229 5211329 12 42 55 20PG, langes Gewinde / PG, long threadPG 7 3-6 5211150 5211250 5211350 15 15 38 50PG 9 4,5-8 5211151 5211251 5211351 15 19 39 50PG 11 6,5-10,5 5211152 5211252 5211352 15 22 42 50PG 13,5 7-12 5211153 5211253 5211353 15 24 42 50PG 16 9-14 5211154 5211254 5211354 15 27 45 50PG 21 11,5-18 5211155 5211255 5211355 15 33 49 20PG 29 15-24,5 5211156 5211256 5211356 15 42 58 20PG 36 24-34 5211157 5211257 5211357 18 55 65 10PG 42 34-42 5211158 5211258 5211358 18 65 67 10PG 48 40-48 5211159 5211259 5211359 18 70 67 10metrisch, kurzes Gewinde / metric, short threadM 16 x 1,5 4,5-8 5211416 5211516 5211616 8 19 32 50M 20 x 1,5/13 7-12 5211420 5211520 5211620 9 24 36 50M 20 x 1,5/16 9-14 5211421 5211521 5211621 9 27 39 50M 25 x 1,5 11,5-18 5211425 5211525 5211625 11 33 44 20M 32 x 1,5 15-24,5 5211432 5211532 5211632 12 42 55 20metrisch, langes Gewinde / metric, long threadM 16 x 1,5 4,5-8 5211441 5211541 5211641 15 19 39 50M 20 x 1,5/13 7-12 5211442 5211542 5211642 15 24 42 50M 20 x 1,5/16 9-14 5211448 5211548 5211648 15 27 45 50M 25 x 1,5 11,5-18 5211443 5211543 5211643 15 33 48 20M 32 x 1,5 15-24,5 5211444 5211544 5211644 15 42 58 20M 40 x 1,5 24-34 5211445 5211545 5211645 15 55 63 10M 50 x 1,5 34-42 5211446 5211546 5211646 15 65 65 10M 63 x 1,5 40-48 5211447 5211547 5211647 15 70 65 5

Eigenschaften:• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

PA 6GFK

120°–

-30°IP 68

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Material:• 1/3: Gland element/Cap nut:

Polyamide PA 6, 25 % glassfiberreinforced

• 2: Seal: TefablocCharacteristics:• PG/metric thread• short/long thread• short seal

Features:• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

Hinweis: Fettgedruckte Artikel auf LagerPassende Gegenmuttern Seite 140

Note: Boldfaced articles on stockSuitable lock nuts page 140

Page 87: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

85SchlemmerKABELSCHUTZSYSTEME

Aussengewinde Klemmbereich Art.-Nr. Art.-Nr. Art.-Nr. E SW L VEmm lichtgrau silbergrau tiefschwarz mm mm mm Stck.

RAL 7035 RAL 7001 RAL 9005Outer thread Clamping range Art. no. Art. no. Art. no. E SW L PU

mm light grey silver grey jet black mm mm mm pcs.RAL 7035 RAL 7001 RAL 9005

KabelverschraubungWADI-TECPolyamidlange Dichtung, 2-teilig

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid PA 6, 25 % glasfaserverstärkt

• 2: Dichtung: Santopren• 4: Dichtung: NitrilKennzeichen:• PG/metrisches Gewinde• kurzes/langes Gewinde• lange Dichtung, 2-teilig

Cable glandWADI-TECPolyamidelong seal, two parts

PG, kurzes Gewinde / PG, short threadPG 9 3-8 5320001 5320021 5320051 8 19 32 50PG 11 5-11 5320002 5320022 5320052 8 22 35 50PG 13,5 5-12,5 5320003 5320023 5320053 9 24 36 50PG 16 7-14,5 5320004 5320024 5320054 10 27 40 50PG 21 10-18 5320005 5320025 5320055 11 33 44 20PG 29 14-24 5320006 5320026 5320056 12 42 55 20PG 36 22-32 5320007 5320027 5320057 18 55 65 10PG 42 30-40 5320008 5320028 5320058 18 65 67 10PG 48 34-46 5320009 5320029 5320059 18 70 67 5PG, langes Gewinde / PG, long threadPG 9 3-8 5320071 5320081 5320091 15 19 39 50PG 11 5-11 5320072 5320082 5320092 15 22 42 50PG 13,5 5-12,5 5320073 5320083 5320093 15 24 42 50PG 16 7-14,5 5320074 5320084 5320094 15 27 45 50PG 21 10-18 5320075 5320085 5320095 15 33 49 20PG 29 14-24 5320076 5320086 5320096 15 42 58 20metrisch, kurzes Gewinde / metric, short threadM 16 x 1,5 3-8 5320100 5320140 5320160 8 19 32 50M 20 x 1,5/13 5-12,5 5320101 5320141 5320161 9 24 36 50M 20 x 1,5/16 7-14,5 5320104 5320144 5320164 9 27 39 50M 25 x 1,5 10-18 5320102 5320142 5320162 11 33 44 20M 32 x 1,5 14-24 5320103 5320143 5320163 12 42 55 20M 40 x 1,5 22-32 5320105 5320145 5320165 15 55 63 10M 50 x 1,5 30-40 5320106 5320146 5320166 15 65 65 10M 63 x 1,5 34-46 5320107 5320147 5320167 15 70 65 5metrisch, langes Gewinde / metric, long threadM 16 x 1,5 3-8 5320120 5320150 5320170 15 19 39 50M 20 x 1,5/13 5-12,5 5320121 5320151 5320171 15 24 42 50M 20 x 1,5/16 7-14,5 5320127 5320158 5320177 15 27 45 50M 25 x 1,5 10-18 5320122 5320152 5320172 15 33 48 20M 32 x 1,5 14-24 5320123 5320153 5320173 15 42 58 20

Eigenschaften:• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

PA 6GFK

120°–

-30°IP 68

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Material:• 1/3: Gland element/Cap nut:

Polyamide PA 6, 25 % glassfiberreinforced

• 2: Seal: Santoprene• 4: Seal: NitrilCharacteristics:• PG/metric thread• short/long thread• long seal, two parts

Features:• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

Hinweis: Fettgedruckte Artikel auf LagerPassende Gegenmuttern Seite 140

Note: Boldfaced articles on stockSuitable lock nuts page 140

Page 88: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Hinweis: Fettgedruckte Artikel auf LagerPassende Gegenmuttern Seite 140Maße siehe WADI-TEC ECA Seite 83

86 SchlemmerKABELSCHUTZSYSTEME

Aussen- Klemm- Art.-Nr. Art.-Nr. Art.-Nr. Klemm- Art.-Nr. Art.-Nr. Art.-Nr. Klemm- Art.-Nr. Art.-Nr. Art.-Nr. VEgewinde bereich lichtgrau silbergrau tiefschwarz bereich lichtgrau silbergrau tiefschwarz bereich lichtgrau silbergrau tiefschwarz Stck.

mm RAL 7035 RAL 7001 RAL 9005 mm RAL 7035 RAL 7001 RAL 9005 mm RAL 7035 RAL 7001 RAL 9005Outer Clamping Art. no. Art. no. Art. no. Clamping Art. no. Art. no. Art. no. Clamping Art. no. Art. no. Art. no. PUthread range light grey silver grey jet black range light grey silver grey jet black range light grey silver grey jet black pcs.

mm RAL 7035 RAL 7001 RAL 9005 mm RAL 7035 RAL 7001 RAL 9005 mm RAL 7035 RAL 7001 RAL 9005

KabelverschraubungWADI-TECPolyamidFlachdichtungPG-Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid PA 6, 25 % glasfaserverstärkt

• 2: Dichtung: TefablocKennzeichen:• PG-Gewinde• lange Dichtung für Flachkabel

gerundet, eckig, oval

Cable glandWADI-TECPolyamideflat sealPG-thread

PG 9 3,5 x 5,5 5320300 5320400 5320500 50PG 11 2,8 x 10,5 5320305 5320405 5320505 50PG 11 3,5 x 9 5320306 5320406 5320506 50PG 11 4 x 6 5320307 5320407 5320507 50PG 13,5 3 x 12 5320310 5320410 5320510 5 x 8 5320375 5320475 5320575 50PG 13,5 5 x 11 5320311 5320411 5320511 5 x 12 5320376 5320476 5320576 50PG 16 5 x 12 5320315 5320415 5320515 8 x 12 5320351 5320451 5320551 5 x 12 5320380 5320480 5320580 50PG 16 5 x 16 5320316 5320416 5320516 5,5 x 8,5 5320381 5320481 5320581 50PG 16 7,5 x 14 5320317 5320417 5320517 5 x 15 5320382 5320482 5320582 50PG 16 6 x 15 5320383 5320483 5320583 50PG 16 7 x 14 5320384 5320484 5320584 50PG 21 5 x 17 5320320 5320420 5320520 4 x 15 5320355 5320455 5320555 5 x 16 5320385 5320485 5320585 20PG 21 7 x 18 5320321 5320421 5320521 7 x 16,5 5320386 5320486 5320586 20PG 21 9 x 15 5320322 5320422 5320522 7 x 20 5320387 5320487 5320587 20PG 29 6 x 29 5320325 5320425 5320525 6 x 26 5320360 5320460 5320560 10 x 27 5320390 5320490 5320590 20PG 29 8 x 25 5320326 5320426 5320526 7 x 26 5320361 5320461 5320561 20PG 29 10 x 25 5320327 5320427 5320527 20PG 29 13 x 28 5320328 5320428 5320528 20PG 36 6 x 30 5320330 5320430 5320530 5 x 36 5320365 5320465 5320565 6,5 x 32 5320393 5320493 5320593 20PG 36 6 x 36 5320331 5320431 5320531 8 x 30 5320366 5320466 5320566 11 x 35 5320394 5320494 5320594 20PG 36 8 x 36 5320332 5320432 5320532 20PG 36 11 x 34 5320333 5320433 5320533 20PG 36 12 x 35 5320334 5320434 5320534 20PG 42 10 x 38 5320335 5320435 5320535 5,5 x 37 5320370 5320470 5320570 6 x 41 5320396 5320496 5320596 20PG 42 13 x 35 5320336 5320436 5320536 6 x 39 5320371 5320471 5320571 9 x 38 5320397 5320497 5320597 20PG 42 14 x 37 5320337 5320437 5320537 20PG 48 6,5 x 47 5320342 5320442 5320542 20PG 48 9 x 43 5320343 5320443 5320543 20PG 48 14,5 x 39 5320344 5320444 5320544 20PG 48 15 x 45 5320345 5320445 5320545 20

Eigenschaften:• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

PA 6GFK

120°–

-30°IP 68

Flachkabel gerundetFlat cable, round

Flachkabel rechteckigFlat cable, angular

Flachkabel ovalFlat cable, oval

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

PG-Gewinde / PG-thread

Material:• 1/3: Gland element/Cap nut:

Polyamide PA 6, 25 % glassfiberreinforced

• 2: Seal: TefablocCharacteristics:• PG-thread• long seal for flat cables,

round, angular, oval

Features:• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

Note: Boldfaced articles on stockSuitable lock nuts page 140Dimensions see WADI-TEC ECA page 83

Page 89: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

87SchlemmerKABELSCHUTZSYSTEME

Aussen- Klemm- Art.-Nr. Art.-Nr. Art.-Nr. Klemm- Art.-Nr. Art.-Nr. Art.-Nr. Klemm- Art.-Nr. Art.-Nr. Art.-Nr. VEgewinde bereich lichtgrau silbergrau tiefschwarz bereich lichtgrau silbergrau tiefschwarz bereich lichtgrau silbergrau tiefschwarz Stck.

mm RAL 7035 RAL 7001 RAL 9005 mm RAL 7035 RAL 7001 RAL 9005 mm RAL 7035 RAL 7001 RAL 9005Outer Clamping Art. no. Art. no. Art. no. Clamping Art. no. Art. no. Art. no. Clamping Art. no. Art. no. Art. no. PUthread range light grey silver grey jet black range light grey silver grey jet black range light grey silver grey jet black pcs.

mm RAL 7035 RAL 7001 RAL 9005 mm RAL 7035 RAL 7001 RAL 9005 mm RAL 7035 RAL 7001 RAL 9005

KabelverschraubungWADI-TECPolyamidFlachdichtungmetrisches Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid PA 6, 25 % glasfaserverstärkt

• 2: Dichtung: TefablocKennzeichen:• metrisches Gewinde• kurzes/langes Gewinde• lange Dichtung für Flachkabel

gerundet, eckig, oval

Cable glandWADI-TECPolyamideflat sealmetric thread

metrisch, kurzes Gewinde / metric, short threadM 16 x 1,5 3,5 x 5,5 5320710 5320610 5320810 50M 20x1,5/13 3 x 12 5320715 5320615 5320815 5 x 8 5320770 5320670 5320870 50M 20x1,5/13 5 x 11 5320716 5320616 5320816 5 x 12 5320771 5320671 5320871 50M 20x1,5/16 5 x 12 5320717 5320617 5320817 8 x 12 5320785 5320685 5320885 5,5 x 8,5 5320772 5320672 5320872 50M 20x1,5/16 7,5 x 14 5320718 5320618 5320818 7 x 14 5320773 5320673 5320873 50M 25 x 1,5 5 x 16 5320720 5320620 5320820 4 x 15 5320786 5320686 5320886 5 x 15 5320774 5320674 5320874 20M 25 x 1,5 5 x 17 5320721 5320621 5320821 5 x 16 5320775 5320675 5320875 20M 25 x 1,5 7 x 18 5320722 5320622 5320822 6 x 15 5320776 5320676 5320876 20M 25 x 1,5 9 x 15 5320723 5320623 5320823 7 x 16,5 5320777 5320677 5320877 20M 32 x 1,5 8 x 25 5320730 5320630 5320830 7 x 20 5320780 5320680 5320880 20M 32 x 1,5 10 x 25 5320731 5320631 5320831 20metrisch, langes Gewinde / metric, long threadM 16 x 1,5 3,5 x 5,5 5320732 5320632 5320832 50M 20x1,5/13 3 x 12 5320735 5320635 5320835 5 x 8 5320700 5320600 5320800 50M 20x1,5/13 5 x 11 5320736 5320636 5320836 5 x 12 5320701 5320601 5320801 50M 20x1,5/16 5 x 12 5320737 5320637 5320837 8 x 12 5320787 5320687 5320887 5,5 x 8,5 5320702 5320602 5320802 50M 20x1,5/16 7,5 x 14 5320738 5320638 5320838 7 x 14 5320703 5320603 5320803 50M 25 x 1,5 5 x 16 5320740 5320640 5320840 4 x 15 5320788 5320688 5320888 5 x 15 5320704 5320604 5320804 20M 25 x 1,5 5 x 17 5320741 5320641 5320841 5 x 16 5320705 5320605 5320805 20M 25 x 1,5 7 x 18 5320742 5320642 5320842 6 x 15 5320706 5320606 5320806 20M 25 x 1,5 9 x 15 5320743 5320643 5320843 7 x 16,5 5320707 5320607 5320807 20M 32 x 1,5 8 x 25 5320745 5320645 5320845 7 x 20 5320708 5320608 5320808 20M 32 x 1,5 10 x 25 5320746 5320646 5320846 20M 40 x 1,5 6 x 29 5320747 5320647 5320847 5 x 36 5320790 5320690 5320890 6,5 x 32 5320781 5320681 5320881 10M 40 x 1,5 6 x 30 5320748 5320648 5320848 6 x 26 5320791 5320691 5320891 10 x 27 5320782 5320682 5320882 10M 40 x 1,5 6 x 36 5320749 5320649 5320849 7 x 26 5320792 5320692 5320892 11 x 35 5320783 5320683 5320883 10M 40 x 1,5 8 x 36 5320750 5320650 5320850 8 x 30 5320793 5320693 5320893 10M 40 x 1,5 11 x 34 5320751 5320651 5320851 10M 40 x 1,5 12 x 35 5320752 5320652 5320852 10M 40 x 1,5 13 x 28 5320753 5320653 5320853 10M 50 x 1,5 10 x 38 5320755 5320655 5320855 5,5 x 37 5320794 5320694 5320894 6 x 41 5320784 5320684 5320884 10M 50 x 1,5 13 x 35 5320756 5320656 5320856 6 x 39 5320795 5320695 5320895 9 x 38 5320796 5320696 5320896 10M 50 x 1,5 14 x 37 5320757 5320657 5320857 10M 63 x 1,5 6,5 x 47 5320758 5320658 5320858 10M 63 x 1,5 9 x 43 5320759 5320659 5320859 10M 63 x 1,5 14,5 x 39 5320760 5320660 5320860 10M 63 x 1,5 15 x 45 5320761 5320661 5320861 10

Eigenschaften:• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

PA 6GFK

120°–

-30°IP 68

Flachkabel gerundetFlat cable, round

Flachkabel rechteckigFlat cable, angular

Flachkabel ovalFlat cable, oval

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Material:• 1/3: Gland element/Cap nut:

Polyamide PA 6, 25 % glassfiberreinforced

• 2: Seal: TefablocCharacteristics:• metric thread• short/long thread• long seal for flat cables

round, angular, oval

Features:• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

Hinweis: Fettgedruckte Artikel auf LagerPassende Gegenmuttern Seite 140Maße siehe WADI-TEC ECA Seite 83

Note: Boldfaced articles on stockSuitable lock nuts page 140Dimensions see WADI-TEC ECA page 83

Metrisches Gewinde / metric thread

Page 90: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

88 SchlemmerKABELSCHUTZSYSTEME

Aussen- Anzahl Lochdurch- E SW L Art.-Nr. Art.-Nr. Art.-Nr. VEgewinde messer mm mm mm lichtgrau silbergrau tiefschwarz Stck.

mm RAL 7035 RAL 7001 RAL 9005Outer Quantity Hole E SW L Art. no. Art. no. Art. no. PUthread diameter mm mm mm light grey silver grey jet black pcs.

mm RAL 7035 RAL 7001 RAL 9005

KabelverschraubungWADI-TEC DuploPolyamidMehrlochdichtungPG-Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid PA 6, 25 % glasfaserverstärkt

• 2: Dichtung: TefablocKennzeichen:• PG-Gewinde• lange Mehrloch-Dichtung

Cable glandWADI-TEC DuploPolyamidemulti-holed sealPG-thread

PG 7 1 x 4 8 15 31 5315800 5315705 5315600 50PG 7 1 x 5 8 15 31 5315801 5315706 5315601 50PG 9 1 x 5 8 19 32 5315810 5315707 5315610 50PG 9 2 x 1 8 19 32 5315811 5315708 5315611 50PG 9 2 x 3 8 19 32 5315812 5315709 5315612 50PG 9 2 x 3,5 8 19 32 5315813 5315710 5315613 50PG 9 2 x 4 8 19 32 5315814 5315711 5315614 50PG 9 3 x 3 8 19 32 5315815 5315712 5315615 50PG 9 4 x 3 8 22 34 5315816 5315713 5315616 50PG 9 4 x 4 8 22 34 5315817 5315714 5315617 50PG 11 2 x 2,3 8 24 35 5315820 5315723 5315620 50PG 11 2 x 3 8 24 35 5315821 5315724 5315621 50PG 11 2 x 3,5 8 24 35 5315110 5315720 5315500 50PG 11 2 x 4 8 27 38 5315822 5315725 5315622 50PG 11 2 x 5 8 24 35 5315111 5315722 5315501 50PG 11 2 x 6 8 27 38 5315112 5315733 5315502 50PG 11 3 x 3 8 24 35 5315823 5315726 5315623 50PG 11 3 x 3,5 8 24 35 5315113 5315721 5315503 50PG 11 3 x 4 8 24 36 5315824 5315727 5315624 50PG 11 3 x 5 8 27 38 5315114 5315734 5315504 50PG 11 3 x 5,3 8 24 35 5315825 5315728 5315625 50PG 11 4 x 1,5 8 27 38 5315826 5315729 5315626 50PG 11 4 x 3,5 8 24 35 5315827 5315730 5315627 50PG 11 6 x 2 8 24 35 5315828 5315731 5315628 50PG 11 6 x 2,5 8 24 35 5315829 5315732 5315629 50PG 13,5 2 x 3 9 24 36 5315830 5315741 5315630 50PG 13,5 2 x 5 9 24 36 5315831 5315742 5315631 50PG 13,5 2 x 6 9 24 36 5315130 5315740 5315510 50PG 13,5 3 x 2 9 24 36 5315832 5315743 5315632 50PG 13,5 3 x 3 9 24 36 5315833 5315744 5315633 50PG 13,5 3 x 4 9 24 36 5315834 5315745 5315634 50PG 13,5 3 x 5,3 9 24 36 5315835 5315746 5315635 50PG 13,5 3 x 6 9 27 38 5315836 5315747 5315636 50PG 13,5 4 x 3 9 24 36 5315837 5315748 5315637 50PG 13,5 4 x 4 9 24 36 5315838 5315749 5315638 50PG 13,5 4 x 5 9 27 38 5315839 5315751 5315639 50PG 13,5 4 x 5,3 9 27 38 5315840 5315750 5315640 50PG 13,5 6 x 3,5 9 24 36 5315841 5315752 5315641 50PG 13,5 10 x 2 9 24 36 5315842 5315753 5315642 50

Eigenschaften:• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

PA 6GFK

120°–

-30°IP 68

Hinweis: Fettgedruckte Artikel auf LagerPassende Gegenmuttern Seite 140

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

PG-Gewinde / PG-thread

Material:• 1/3: Gland element/Cap nut:

Polyamide PA 6, 25 % glassfiberreinforced

• 2: Seal: TefablocCharacteristics:• PG-thread• long multi-holed seal

Features:• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

Note: Boldfaced articles on stockSuitable lock nuts page 140

Page 91: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

89

Aussen- Anzahl Lochdurch- E SW L Art.-Nr. Art.-Nr. Art.-Nr. VEgewinde messer mm mm mm lichtgrau silbergrau tiefschwarz Stck.

mm RAL 7035 RAL 7001 RAL 9005Outer Quantity Hole E SW L Art. no. Art. no. Art. no. PUthread diameter mm mm mm light grey silver grey jet black pcs.

mm RAL 7035 RAL 7001 RAL 9005

PG 16 2 x 4 10 27 40 5315850 5315756 5315650 50PG 16 2 x 5 10 27 40 5315851 5315757 5315651 50PG 16 2 x 6 10 33 42 5315852 5315758 5315652 50PG 16 2 x 7 10 27 40 5315160 5315754 5315515 50PG 16 2 x 8 10 33 42 5315853 5315759 5315653 50PG 16 2 x 9 10 27 40 5315854 5315760 5315654 50PG 16 3 x 3 10 27 40 5315855 5315761 5315655 50PG 16 3 x 4 10 27 40 5315856 5315762 5315656 50PG 16 3 x 5 10 27 40 5315857 5315755 5315516 50PG 16 3 x 5,6 10 27 40 5315858 5315763 5315658 50PG 16 3 x 6 10 33 42 5315859 5315765 5315659 50PG 16 3 x 7 10 27 40 5315860 5315764 5315660 50PG 16 3 x 8 10 33 42 5315861 5315766 5315661 50PG 16 4 x 4 10 27 40 5315862 5315767 5315662 50PG 16 4 x 5 10 33 42 5315863 5315768 5315663 50PG 16 4 x 6 10 33 40 5315864 5315773 5315664 50PG 16 5 x 4 10 33 42 5315865 5315769 5315665 50PG 16 5 x 5 10 27 40 5315866 5315770 5315666 50PG 16 6 x 4 10 27 40 5315867 5315771 5315667 50PG 16 7 x 4 10 27 40 5315868 5315772 5315668 50PG 21 2 x 4,5 11 33 44 5315869 5315780 5315669 20PG 21 2 x 8 11 42 48 5315870 5315781 5315670 20PG 21 2 x 8,7 11 33 44 5315871 5315782 5315671 20PG 21 2 x 9 11 33 44 5315872 5315783 5315672 20PG 21 2 x 11 11 42 48 5315873 5315791 5315673 20PG 21 3 x 7 11 33 44 5315210 5315779 5315520 20PG 21 3 x 8 11 42 48 5315211 5315777 5315521 20PG 21 3 x 9 11 42 48 5315874 5315792 5315674 20PG 21 4 x 5 11 42 48 5315875 5315793 5315675 20PG 21 4 x 6 11 33 44 5315212 5315774 5315522 20PG 21 4 x 7,5 11 42 48 5315876 5315794 5315676 20PG 21 4 x 8 11 42 48 5315213 5315788 5315523 20PG 21 5 x 5 11 33 44 5315877 5315795 5315677 20PG 21 5 x 6 11 42 48 5315214 5315776 5315524 20PG 21 5 x 6,5 11 42 48 5315215 5315778 5315525 20PG 21 6 x 4 11 33 44 5315878 5315796 5315678 20PG 21 6 x 5 11 42 48 5315879 5315797 5315679 20PG 21 6 x 6 11 42 48 5315216 5315789 5315526 20PG 21 6 x 6,5 11 42 48 5315217 5315784 5315527 20PG 21 6 x 7 11 33 44 5315218 5315788 5315528 20PG 21 7 x 6 11 33 44 5315219 5315790 5315529 20PG 21 8 x 4 11 33 44 5315880 5315798 5315683 20PG 21 8 x 5 11 33 44 5315220 5315775 5315530 20PG 21 11 x 5 11 33 44 5315221 5315787 5315531 20PG 21 21 x 2 11 42 48 5315881 5315799 5315684 20PG 21 28 x 3 11 33 44 5315222 5315786 5315532 20PG 29 2 x 9 12 42 48 5315289 5315911 5315690 20PG 29 2 x 11 12 42 48 5315891 5315918 5315691 20PG 29 2 x 12 12 42 48 5315892 5315919 5315692 20PG 29 3 x 9 12 42 48 5315893 5315920 5315693 20PG 29 3 x 11 12 42 48 5315894 5315921 5315694 20PG 29 4 x 8 12 42 48 5315290 5315913 5315540 20PG 29 4 x 9 12 42 48 5315895 5315922 5315695 20PG 29 4 x 10 12 42 48 5315896 5315923 5315696 20PG 29 6 x 6 12 42 48 5315897 5315927 5315697 20PG 29 6 x 6,5 12 42 48 5315292 5315910 5315542 20PG 29 6 x 7 12 42 48 5315293 5315917 5315543 20PG 29 7 x 6 12 42 48 5315294 5315912 5315544 20PG 29 7 x 7 12 42 48 5315898 5315924 5315698 20PG 29 8 x 5 12 42 48 5315899 5315925 5315699 20PG 29 8 x 6 12 42 48 5315295 5315914 5315545 20PG 29 10 x 6 12 42 48 5315900 5315926 5315700 20PG 29 11 x 5 12 42 48 5315296 5315916 5315546 20PG 29 28 x 3 12 42 48 5315297 5315915 5315547 20

Hinweis: Fettgedruckte Artikel auf LagerPassende Gegenmuttern Seite 140

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Note: Boldfaced articles on stockSuitable lock nuts page 140

Page 92: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

90

Aussen- Anzahl Lochdurch- E SW L Art.-Nr. Art.-Nr. Art.-Nr. VEgewinde messer mm mm mm lichtgrau silbergrau tiefschwarz Stck.

mm RAL 7035 RAL 7001 RAL 9005Outer Quantity Hole E SW L Art. no. Art. no. Art. no. PUthread diameter mm mm mm light grey silver grey jet black pcs.

mm RAL 7035 RAL 7001 RAL 9005

KabelverschraubungWADI-TEC DuploPolyamidMehrlochdichtungmetrisches Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid PA 6, 25 % glasfaserverstärkt

• 2: Dichtung: TefablocKennzeichen:• metrisches Gewinde• lange Mehrloch-Dichtung

Cable glandWADI-TEC DuploPolyamidemulti-holed sealmetric thread

M 16 x 1,5 2 x 1 8 19 32 5316100 5317100 5318100 50M 16 x 1,5 2 x 3 8 19 32 5316101 5317101 5318101 50M 16 x 1,5 2 x 3,5 8 19 32 5316102 5317102 5318102 50M 16 x 1,5 2 x 4 8 19 32 5316103 5317103 5318103 50M 16 x 1,5 3 x 3 8 19 32 5316104 5317104 5318104 50M 20 x 1,5 2 x 3 9 24 36 5316200 5317200 5318200 50M 20 x 1,5 2 x 4 9 27 39 5316201 5317201 5318201 50M 20 x 1,5 2 x 5 9 27 39 5316202 5317202 5318202 50M 20 x 1,5 2 x 6 9 27 39 5316203 5317203 5318203 50M 20 x 1,5 2 x 7 9 27 39 5316204 5317204 5318204 50M 20 x 1,5 3 x 2 9 24 36 5316205 5317205 5318205 50M 20 x 1,5 3 x 3 9 27 39 5316206 5317206 5318206 50M 20 x 1,5 3 x 4 9 27 39 5316207 5317207 5318207 50M 20 x 1,5 3 x 5 9 27 39 5316208 5317208 5318208 50M 20 x 1,5 3 x 5,6 9 27 39 5316209 5317209 5318209 50M 20 x 1,5 3 x 6 9 27 39 5316210 5317210 5318210 50M 20 x 1,5 4 x 3 9 24 36 5316211 5317211 5318211 50M 20 x 1,5 4 x 4 9 27 39 5316212 5317212 5318212 50M 20 x 1,5 5 x 4 9 27 39 5316213 5317213 5318213 50M 20 x 1,5 5 x 5 9 27 39 5316214 5317214 5318214 50M 20 x 1,5 6 x 3,5 9 24 36 5316215 5317215 5318215 50M 20 x 1,5 6 x 4 9 27 39 5316216 5317216 5318216 50M 20 x 1,5 10 x 2 9 24 36 5316217 5317217 5318217 50M 25 x 1,5 2 x 4,5 11 33 44 5316300 5317300 5318300 20M 25 x 1,5 2 x 8 11 33 44 5316301 5317301 5318301 20M 25 x 1,5 3 x 7 11 33 44 5316302 5317302 5318302 20M 25 x 1,5 3 x 8 11 33 44 5316303 5317303 5318303 20M 25 x 1,5 4 x 5 11 33 44 5316304 5317304 5318304 20M 25 x 1,5 4 x 6 11 33 44 5316305 5317305 5318305 20M 25 x 1,5 5 x 5 11 33 44 5316306 5317306 5318306 20M 25 x 1,5 5 x 6 11 33 44 5316307 5317307 5318307 20M 25 x 1,5 5 x 6,5 11 33 44 5316308 5317308 5318308 20M 25 x 1,5 6 x 4 11 33 44 5316309 5317309 5318309 20M 25 x 1,5 6 x 5 11 33 44 5316310 5317310 5318310 20M 25 x 1,5 8 x 4 11 33 44 5316311 5317311 5318311 20M 25 x 1,5 8 x 5 11 33 44 5316312 5317312 5318312 20M 25 x 1,5 21 x 2 11 33 44 5316313 5317313 5318313 20M 32 x 1,5 2 x 9 12 42 55 5316400 5317400 5318400 20M 32 x 1,5 2 x 11 12 42 55 5316401 5317401 5318401 20

Eigenschaften:• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

PA 6GFK

120°–

-30°IP 68

Hinweis: Fettgedruckte Artikel auf LagerPassende Gegenmuttern Seite 140

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Metrisches Gewinde / metric thread

Material:• 1/3: Gland element/Cap nut:

Polyamide PA 6, 25 % glassfiberreinforced

• 2: Seal: TefablocCharacteristics:• metric thread• long multi-holed seal

Features:• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

Note: Boldfaced articles on stockSuitable lock nuts page 140

Page 93: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

91

Aussen- Anzahl Lochdurch- E SW L Art.-Nr. Art.-Nr. Art.-Nr. VEgewinde messer mm mm mm lichtgrau silbergrau tiefschwarz Stck.

mm RAL 7035 RAL 7001 RAL 9005Outer Quantity Hole E SW L Art. no. Art. no. Art. no. PUthread diameter mm mm mm light grey silver grey jet black pcs.

mm RAL 7035 RAL 7001 RAL 9005

M 32 x 1,5 2 x 12 12 42 55 5316402 5317402 5318402 20M 32 x 1,5 3 x 9 12 42 55 5316403 5317403 5318403 20M 32 x 1,5 3 x 11 12 42 55 5316404 5317404 5318404 20M 32 x 1,5 4 x 8 12 42 55 5316405 5317405 5318405 20M 32 x 1,5 4 x 9 12 42 55 5316406 5317406 5318406 20M 32 x 1,5 4 x 10 12 42 55 5316407 5317407 5318407 20M 32 x 1,5 6 x 6 12 42 55 5316408 5317408 5318408 20M 32 x 1,5 6 x 6,5 12 42 55 5316409 5317409 5318409 20M 32 x 1,5 6 x 7 12 42 55 5316410 5317410 5318410 20M 32 x 1,5 7 x 6 12 42 55 5316411 5317411 5318411 20M 32 x 1,5 7 x 7 12 42 55 5316412 5317412 5318412 20M 32 x 1,5 8 x 5 12 42 55 5316413 5317413 5318413 20M 32 x 1,5 8 x 6 12 42 55 5316414 5317414 5318414 20M 32 x 1,5 10 x 6 12 42 55 5316415 5317415 5318415 20M 32 x 1,5 11 x 5 12 42 55 5316416 5317416 5318416 20M 32 x 1,5 28 x 3 12 42 55 5316417 5317417 5318417 20

Hinweis: Fettgedruckte Artikel auf LagerPassende Gegenmuttern Seite 140

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Note: Boldfaced articles on stockSuitable lock nuts page 140

Page 94: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

92

KabelverschraubungWADI-TECPVDFmetrisches Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyvinylidenfluorid• 2: ECA-Klemmring: Polycarbonat• 4: Dichtung: SantoprenKennzeichen:• metrisches Gewinde• ECA-Klemmring• kurze/lange DichtungEigenschaften:• halogenfrei• Zugentlastung durch Klemmring

Cable glandWADI-TECPVDFmetric thread

M 12 x 1,5 3-6 5330012 3-6 5330112 15 15 38 50M 16 x 1,5 5-8 5330016 4,5-8 5330116 3-8 5330216 15 19 39 50M 20 x 1,5/13 8-12 5330020 7-12 5330120 6-12,5 5330220 15 24 42 50M 20 x 1,5/16 10-14 5330021 9-14 5330121 7-14,5 5330221 15 27 45 50M 25 x 1,5 11,5-18 5330025 11,5-18 5330125 10-18 5330225 15 33 48 20M 32 x 1,5 15-24 5330032 15-24,5 5330132 14-24 5330232 15 42 58 20M 40 x 1,5 24-34 5330040 22-32 5330240 15 55 63 10M 50 x 1,5 34-42 5330050 30-40 5330250 15 65 65 10M 63 x 1,5 40-48 5330063 34-46 5330263 15 70 65 5

PVDF120°

–-40°

IP 68

Passende Gegenmuttern ab Seite 140

ECAECA

Dichtung kurzSeal short

Dichtung langSeal long

• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbar• UV-BeständigkeitAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau und Installationstechnik• Lebensmitteltechnik

Metrisches Gewinde / metric thread

Material:• 1/3: Gland element/Cap nut:

Polyvinylidenefluoride• 2: ECA-Clamping-Ring:

Polycarbonate• 4: Seal: SantopreneCharacteristics:• metric thread• ECA-clamping ring• short/long sealFeatures:• free of halogen

• traction relief through clamping ring• gas and water-tight• completely twist protected• combinable with various sealing

inserts• UV resistanceApplications:• machines and devices• measuring and control engineering• plant installations• food sector

Suitable lock nuts page 140

Aussen- Klemm- Art.-Nr. Klemm- Art.-Nr. Klemm- Art.-Nr. E SW L VEgewinde bereich bereich bereich mm mm mm Stck.

mm mm mmOuter Clamping Art. no. Clamping Art. no. Clamping Art. no. E SW L PUthread range range range mm mm mm pcs.mm mm mm mm

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Weitere Dichteinsätze auf Anfrage / further sealing inserts on request

Page 95: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

lange Dichtung**long Seal**

93

Aussen- Klemm- Art.-Nr. Klemm- Art.-Nr. Klemm- Art.-Nr. E SW L VEgewinde bereich bereich bereich mm mm mm Stck.

mm mm mmOuter Clamping Art. no. Clamping Art. no. Clamping Art. no. E SW L PUthread range range range mm mm mm pcs.

mm mm mm

KabelverschraubungWADI-TECMessing vernickeltPG-Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Dichtung: Tefabloc• 4: Dichtung für Außengewinde: Nitril• 5: ECA-Klemmring: PolycarbonatKennzeichen:• PG-Gewinde• ECA-Klemmring• kurzes/langes Gewinde• kurze/lange Dichtung

Cable glandWADI-TECnickel-plated brassPG-thread

PG, kurzes Gewinde / PG, short threadPG 7 3-6 4221079 3-6 4221000 5 14 24 50PG 9 5-8 4221095 5-8 4221001 3-8 4224001 6 17 25 50PG 11 6-10 4221117 6-10 4221002 5-10,5 4224002 6 20 26 50Pg 13,5 8-12 4221133 8-12 4221003 6-12,5 4224003 6,5 22 28 50PG 16 9,5-14 4221168 9,5-14 4221004 7-14,5 4224004 6,5 24 30 20PG 21 11,5-18 4221214 11,5-18 4221005 10-18 4224005 7 30 35 20PG 29 15-24 4221290 15-24 4221006 14-24 4224006 8 40 43 20PG 36* 23-30 4221362 22-30 4221007 9 50 50 10PG 42* 26-35 4221427 25-35 4221008 10 58 57 5PG 48* 35-40 4221486 30-40 4221009 10 64 59 5

PG, langes Gewinde / PG, long threadPG 7 3-6 4221507 3-6 4221020 15 14 34 50PG 9 5-8 4221509 5-8 4221021 3-8 4224021 15 17 34 50PG 11 6-10 4221511 6-10 4221022 5-10,5 4224022 15 20 35 50Pg 13,5 8-12 4221513 8-12 4221023 6-12,5 4224023 15 22 36,5 50PG 16 9,5-14 4221516 9,5-14 4221024 7-14,5 4224024 15 24 38,5 20PG 21 11,5-18 4221521 11,5-18 4221025 10-18 4224025 15 30 43 20PG 29 15-24 4221529 15-24 4221026 14-24 4224026 15 40 50 20PG 36* 23-30 4221536 22-30 4221027 18 50 59 10PG 42* 26-35 4221542 25-35 4221028 18 58 65 5PG 48* 35-40 4221548 30-40 4221029 18 64 67 5

Eigenschaften:• Zugentlastung durch Klemmring• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau und Installationstechnik

MS+120°

–-25°

IP 68

*) Klemmringe aus Polyoxymetylen (POM)Dauergebrauchstemperatur -30°C bis 95°C

* Bild Seite 81** Bild Seite 81

Passende Gegenmuttern Seite 143

ECAECA

kurze Dichtung*short Seal*

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

PG-Gewinde / PG-thread

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Seal: Tefabloc• 4: Seal for outer thread: Nitril• 5: ECA-Clamping-Ring: PolycarbonateCharacteristics:• PG-thread• ECA clamping ring• short/long thread• short/long seal

Features:• traction relief through clamping ring• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

*) Clamping ring made of Polyoxymetylene (POM)Permanent use temperature -30°C to 95°C

* Picture page 81** Picture page 81

Suitable lock nuts page 143

Page 96: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

94

Aussen- Klemm- Art.-Nr. Klemm- Art.-Nr. Klemm- Art.-Nr. E SW 1 SW 2 L VEgewinde bereich bereich bereich mm mm mm mm Stck.

mm mm mmOuter Clamping Art. no. Clamping Art. no. Clamping Art. no. E SW 1 SW 2 L PUthread range range range mm mm mm mm pcs.

mm mm mm

KabelverschraubungWADI-TECMessing vernickeltmetrisches Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Dichtung: Tefabloc• 4: Dichtung für Außengewinde: Nitril• 5: ECA-Klemmring: PolycarbonatKennzeichen:• metrisches Gewinde• ECA-Klemmring• kurzes/langes Gewinde• kurze/lange Dichtung

Cable glandWADI-TECnickel-plated brassmetric thread

metrisch, kurzes Gewinde / metric, short threadM 12 x 1,5 3-6 4221714 3-6 4221039 7 14 14 27 50M 16x1,5/7 3-6 4221716 3-6 4221040 7 14 17 27 50M 16x1,5/9 5-8 4221717 5-8 4221041 3-8 4224101 7 17 17 27 50M 20x1,5/11 6-10 4221720 6-10 4221042 5-10,5 4224102 7 20 22 28 50M 20x1,5/13 8-12 4221721 8-12 4221043 6-12,5 4224103 7 22 22 29 50M 25x1,5/16 9,5-14 4221725 9,5-14 4221044 7-14,5 4224104 8 24 26 31 20M 25x1,5/21 11,5-18 4221726 11,5-18 4221045 10-18 4224105 8 30 30 37 20M 32x1,5/21 11,5-18 4221732 11,5-18 4221046 10-18 4224106 8,5 30 33 38 10M 32x1,5/29 15-24 4221733 15-24 4221047 14-24 4224107 8,5 40 40 45 10M 40 x 1,5 15-24 4221740 15-24 4221048 8,5 40 42 45 5M 50*x 1,5 23-30 4221750 22-30 4221049 9,5 50 55 51 5M 63*x 1,5 26-35 4221760 25-35 4221050 10,5 58 70 58 5

metrisch, langes Gewinde / metric, long threadM 12 x 1,5 3-6 4221712 3-6 4221059 13 14 14 33 50M 16x1,5/7 3-6 4221718 3-6 4221060 13 14 17 33 50M 16x1,5/9 5-8 4221719 5-8 4221061 3-8 4224121 13 17 17 33 50M 20x1,5/11 6-10 4221722 6-10 4221062 5-10,5 4224122 13 20 22 34 50M 20x1,5/13 8-12 4221723 8-12 4221063 6-12,5 4224123 13 22 22 35 50M 25x1,5/16 9,5-14 4221727 9,5-14 4221064 7-14,5 4224124 14 24 26 37 20M 25x1,5/21 11,5-18 4221728 11,5-18 4221065 10-18 4224125 14 30 30 43 20M 32x1,5/21 11,5-18 4221734 11,5-18 4221066 10-18 4224126 14,5 30 33 44 20M 32x1,5/29 15-24 4221735 15-24 4221067 14-24 4224127 14,5 40 40 51 10M 40 x 1,5 15-24 4221741 15-24 4221068 14,5 40 42 51 5M 50*x 1,5 23-30 4221751 22-30 4221069 15,5 50 55 57 5M 63*x 1,5 26-35 4221761 25-35 4221070 16,5 58 70 64 5

Eigenschaften:• Zugentlastung durch Klemmring• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau und Installationstechnik

MS120°

–-25°

IP 68

*) Klemmringe aus Polyoxymetylen (POM)Dauergebrauchstemperatur -30°C bis 95°C

* Bild Seite 81** Bild Seite 81Passende Gegenmuttern Seite 143

ECAECA

kurze Dichtung*short Seal*

lange Dichtung**long Seal**

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Metrisches Gewinde / metric thread

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Seal: Tefabloc• 4: Seal for outer thread: Nitril• 5: ECA-Clamping-Ring: PolycarbonateCharacteristics:• metric thread• ECA-clamping ring• short/long thread• short/long seal

Features:• traction relief through clamping ring• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

*) Clamping ring made of Polyoxymetylene (POM)Permanent use temperature -30°C to 95°C

* Picture page 81** Picture page 81Suitable lock nuts page 143

Page 97: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

95

Aussengewinde Klemmbereich Art.-Nr. Klemmbereich Art.-Nr. Klemmbereich Art.-Nr. VEmm mm mm Stck.

Outer thread Clamping range Art. no. Clamping range Art. no. Clamping range Art. no. PUmm mm mm pcs.

KabelverschraubungWADI-TECMessing vernickeltFlachdichtungPG-Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Dichtung: Tefabloc• 4: Dichtung für Außengewinde: NitrilKennzeichen:• PG-Gewinde• Dichtung für Flachkabel gerundet,

eckig, oval

Cable glandWADI-TECnickel-plated brassflat sealPG-thread

PG, kurzes Gewinde / PG, short threadPG 9 3,5 x 5,5 4224300 50PG 11 2,8 x 10,5 4224305 50PG 11 3,5 x 9 4224306 50PG 11 4 x 6 4224307 50PG 13,5 3 x 12 4224310 5 x 8 4224375 50PG 13,5 5 x 11 4224311 5 x 12 4224376 50PG 16 5 x 12 4224315 8 x 12 4224351 5 x 12 4224390 25PG 16 7,5 x 14 4224317 5,5 x 8,5 4224380 25PG 16 6 x 10 4224382 25PG 16 7 x 14 4224384 25PG 16/21 5 x 16 4224316 5 x 15 4224381 20PG 16/21 6 x 15 4224383 20PG 21 5 x 17 4224320 4 x 15 4224355 5 x 16 4224385 20PG 21 7 x 18 4224321 7 x 16,5 4224386 20PG 21 9 x 15 4224322 20PG 21/29 7 x 20 4224387 10PG 29 8 x 25 4224326 10PG 29 10 x 25 4224327 10

PG, langes Gewinde / PG, long threadPG 9 3,5 x 5,5 4224450 50PG 11 2,8 x 10,5 4224455 50PG 11 3,5 x 9 4224456 50PG 11 4 x 6 4224457 50PG 13,5 3 x 12 4224460 5 x 8 4224575 50PG 13,5 5 x 11 4224461 5 x 12 4224576 50PG 16 5 x 12 4224465 8 x 12 4224551 5 x 12 4224590 25PG 16 7,5 x 14 4224467 5,5 x 8,5 4224580 25PG 16 6 x 10 4224582 25PG 16 7 x 14 4224584 25PG 16/21 5 x 16 4224466 5 x 15 4224581 20PG 16/21 6 x 15 4224583 20PG 21 5 x 17 4224480 4 x 15 4224555 5 x 16 4224585 20PG 21 7 x 18 4224481 7 x 16,5 4224586 20PG 21 9 x 15 4224482 20PG 21/29 7 x 20 4224587 10PG 29 8 x 25 4224506 10PG 29 10 x 25 4224507 10

Eigenschaften:• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

MS120°

–-25°

IP 68

Flachkabel gerundetFlat cable, round

Flachkabel rechteckigFlat cable, angular

Flachkabel ovalFlat cable, oval

Passende Gegenmuttern Seite 143Maße siehe WADI-TEC ECA Seite 93

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

PG-Gewinde / PG-thread

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Seal: Tefabloc• 4: Seal for outer thread: NitrilCharacteristics:• PG thread• seal for flat cable, round,

angular, oval

Features:• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

Suitable lock nuts page 143Dimensions see WADI-TEC ECA page 93

Page 98: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich Art.-Nr. Klemmbereich Art.-Nr. Klemmbereich Art.-Nr. VEmm mm mm Stck.

Outer thread Clamping range Art. no. Clamping range Art. no. Clamping range Art. no. PUmm mm mm pcs.

96

KabelverschraubungWADI-TECMessing vernickeltFlachdichtungmetrisches Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Dichtung: Tefabloc• 4: Dichtung für Außengewinde: NitrilKennzeichen:• metrisches Gewinde• Dichtring für Flachkabel gerundet,

eckig, oval

Cable glandWADI-TECnickel-plated brassflat sealmetric thread

metrisch, kurzes Gewinde / metric, short threadM 16 x 1,5/9 3,5 x 5,5 4224700 50M 20 x 1,5/11 2,8 x 10,5 4224705 50M 20 x 1,5/11 3,5 x 9 4224706 50M 20 x 1,5/11 4 x 6 4224707 50M 20 x 1,5/13 3 x 12 4224710 5 x 8 4224775 50M 20 x 1,5/13 5 x 11 4224711 5 x 12 4224776 50M 25 x 1,5/16 5 x 12 4224715 8 x 12 4224751 5 x 12 4224790 20M 25 x 1,5/16 7,5 x 14 4224717 5,5 x 8,5 4224780 20M 25 x 1,5/16 6 x 10 4224781 20M 25 x 1,5/16 7 x 14 4224782 20M 25 x 1,5/21 5 x 16 4224716 4 x 15 4224755 5 x 15 4224784 20M 25 x 1,5/21 5 x 17 4224720 5 x 16 4224785 20M 25 x 1,5/21 7 x 18 4224721 6 x 15 4224783 20M 25 x 1,5/21 9 x 15 4224722 7 x 16,5 4224786 20M 32 x 1,5/29 8 x 25 4224726 7 x 20 4224787 10M 32 x 1,5/29 10 x 25 4224727 10

metrisch, langes Gewinde / metric, long threadM 16 x 1,5/9 3,5 x 5,5 4224600 50M 20 x 1,5/11 2,8 x 10,5 4224605 50M 20 x 1,5/11 3,5 x 9 4224606 50M 20 x 1,5/11 4 x 6 4224607 50M 20 x 1,5/13 3 x 12 4224610 5 x 8 4224675 50M 20 x 1,5/13 5 x 11 4224611 5 x 12 4224676 50M 25 x 1,5/16 5 x 12 4224615 8 x 12 4224651 5 x 12 4224690 20M 25 x 1,5/16 7,5 x 14 4224617 5,5 x 8,5 4224680 20M 25 x 1,5/16 6 x 10 4224681 20M 25 x 1,5/16 7 x 14 4224682 20M 25 x 1,5/21 5 x 16 4224616 4 x 15 4224655 5 x 15 4224684 20M 25 x 1,5/21 5 x 17 4224620 5 x 16 4224685 20M 25 x 1,5/21 7 x 18 4224621 6 x 15 4224683 20M 25 x 1,5/21 9 x 15 4224622 7 x 16,5 4224686 20M 32 x 1,5/29 8 x 25 4224626 7 x 20 4224687 10M 32 x 1,5/29 10 x 25 4224627 10

Eigenschaften:• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

MS120°

–-25°

IP 68

Flachkabel gerundetFlat cable, round

Flachkabel rechteckigFlat cable, angular

Flachkabel ovalFlat cable, oval

Passende Gegenmuttern Seite 143Maße siehe WADI-TEC ECA Seite 93

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Metrisches Gewinde / metric thread

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Seal: Tefabloc• 4: Seal for outer thread: NitrilCharacteristics:• metric thread• seal for flat cable, round,

angular, oval

Features:• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

Suitable lock nuts page 143Dimensions see WADI-TEC ECA page 93

Page 99: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

97

Aussen- Anzahl Loch- E SW 1/2 L Art.-Nr. VEgewinde durchmesser mm mm mm Stck.

mmOuter Quantity Hole E SW 1/2 L Art. no. PUthread diameter mm mm mm pcs.

mm

KabelverschraubungWADI-TEC DuploMessing vernickeltMehrlochdichtungPG-Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Dichtung: Tefabloc• 4: Dichtung für Außengewinde: NitrilKennzeichen:• PG-Gewinde• lange Mehrloch-Dichtung

Cable glandWADI-TEC Duplonickel-plated brassmulti-holed sealPG-thread

Eigenschaften:• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

MS120°

–-25°

IP 68

Hinweis: Weitere Mehrloch-Dichteinsätze auf AnfragePassende Gegenmuttern Seite 143

PG 7 1 x 4 5 14 24 4248640 50PG 7 1 x 5 5 14 24 4248641 50PG 9 1 x 5 6 17 25 4248642 50PG 9 2 x 1 6 17 25 4248643 50PG 9 2 x 3 6 17 25 4248644 50PG 9 2 x 3,5 6 17 25 4248645 50PG 9 2 x 4 6 17 25 4248646 50PG 9 3 x 3 6 17 25 4248647 50PG 9 4 x 3 6 20 26 4248648 50PG 9 4 x 4 6 20 26 4248649 50PG 11 2 x 2,3 6 20 26 4248650 50PG 11 2 x 3 6 20 26 4248651 50PG 11 2 x 3,5 6 20 26 4248405 50PG 11 2 x 4 6 20 26 4248652 50PG 11 2 x 5 6 20 26 4248660 50PG 11 2 x 6 6,5 24 30 4248661 50PG 11 3 x 3 6 20 26 4248653 50PG 11 3 x 3,5 6 20 26 4248407 50PG 11 3 x 4 6 20 26 4248654 50PG 11 3 x 5 6,5 24 30 4248662 50PG 11 3 x 5,3 6,5 22 28 4248655 50PG 11 4 x 1,5 6 20 26 4248656 50PG 11 4 x 3,5 6 20 26 4248657 50PG 11 6 x 2 6 20 26 4248658 50PG 11 6 x 2,5 6 20 26 4248659 50PG 13,5 2 x 3 6,5 22 28 4248663 50PG 13,5 2 x 5 6,5 22 28 4248664 50PG 13,5 2 x 6 6,5 22 28 4248404 50PG 13,5 3 x 2 6,5 22 28 4248665 50PG 13,5 3 x 3 6,5 22 28 4248666 50PG 13,5 3 x 4 6,5 22 28 4248667 50PG 13,5 3 x 5,3 6,5 24 30 4248668 50PG 13,5 3 x 6 6,5 24 30 4248669 50PG 13,5 4 x 3 6,5 22 28 4248670 50PG 13,5 4 x 4 6,5 22 28 4248671 50PG 13,5 4 x 5 6,5 24 30 4248673 50PG 13,5 4 x 5,3 6,5 24 30 4248672 50PG 13,5 6 x 3,5 6,5 22 28 4248674 50PG 13,5 10 x 2 6,5 22 28 4248675 50

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

PG-Gewinde / PG-thread

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Seal: Tefabloc• 4: Seal for outer thread: NitrilCharacteristics:• PG-thread• long multi-holed seal

Features:• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

Note: Further multi-hole seal inserts on requestSuitable lock nuts page 143

Page 100: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

98

Aussen- Anzahl Loch- E SW 1/2 L Art.-Nr. VEgewinde durchmesser mm mm mm Stck.

mmOuter Quantity Hole E SW 1/2 L Art. no. PUthread diameter mm mm mm pcs.

mm

PG 16 2 x 4 6,5 24 30 4248678 50PG 16 2 x 5 6,5 24 30 4248679 50PG 16 2 x 6 6,5 24 30 4248680 50PG 16 2 x 7 6,5 24 30 4248409 50PG 16 2 x 8 7 30 35 4248681 50PG 16 2 x 9 7 30 35 4248682 50PG 16 3 x 3 6,5 24 30 4248683 50PG 16 3 x 4 6,5 24 30 4248684 50PG 16 3 x 5 6,5 24 30 4248677 50PG 16 3 x 5,6 6,5 24 30 4248685 50PG 16 3 x 6 6,5 24 30 4248686 50PG 16 3 x 7 7 30 35 4248695 50PG 16 3 x 8 6,5 24 30 4248687 50PG 16 4 x 4 6,5 24 30 4248688 50PG 16 4 x 5 7 30 35 4248689 50PG 16 4 x 6 7 30 35 4248694 50PG 16 5 x 4 6,5 24 30 4248690 50PG 16 5 x 5 7 30 35 4248691 50PG 16 6 x 4 6,5 24 30 4248692 50PG 16 7 x 4 7 30 35 4248693 50PG 21 2 x 4,5 7 30 35 4248696 20PG 21 2 x 8 7 30 35 4248697 20PG 21 2 x 8,7 8 40 43 4248698 20PG 21 2 x 9 8 40 43 4248699 20PG 21 2 x 11 8 40 43 4248700 20PG 21 3 x 7 7 30 35 4248542 20PG 21 3 x 8 7 30 35 4248531 20PG 21 3 x 9 8 40 43 4248701 20PG 21 4 x 5 7 30 35 4248702 20PG 21 4 x 6 7 30 35 4248529 20PG 21 4 x 7,5 8 40 43 4248709 20PG 21 4 x 8 8 40 43 4248703 20PG 21 5 x 5 7 30 35 4248704 20PG 21 5 x 6 7 30 35 4248539 20PG 21 5 x 6,5 7 30 35 4248541 20PG 21 6 x 4 7 30 35 4248705 20PG 21 6 x 5 7 30 35 4248706 20PG 21 6 x 6 8 40 43 4248713 20PG 21 6 x 6,5 8 40 43 4248710 20PG 21 6 x 7 8 40 43 4248715 20PG 21 7 x 6 8 40 43 4248714 20PG 21 8 x 4 7 30 35 4248707 20PG 21 8 x 5 7 30 35 4248543 20PG 21 11 x 5 8 40 43 4248712 20PG 21 21 x 2 7 30 35 4248708 20PG 21 28 x 3 8 40 43 4248711 20PG 29 2 x 9 8 40 43 4248716 20PG 29 2 x 11 8 40 43 4248717 20PG 29 3 x 9 8 40 43 4248719 20PG 29 3 x 11 8 40 43 4248720 20PG 29 4 x 8 8 40 43 4248629 20PG 29 4 x 9 8 40 43 4248721 20PG 29 4 x 10 8 40 43 4248722 20PG 29 6 x 6 8 40 43 4248627 20PG 29 6 x 6,5 8 40 43 4248610 20PG 29 6 x 7 8 40 43 4248614 20PG 29 7 x 6 8 40 43 4248631 20PG 29 7 x 7 8 40 43 4248723 20PG 29 8 x 5 8 40 43 4248724 20PG 29 8 x 6 8 40 43 4248632 20PG 29 10 x 6 8 40 43 4248725 20PG 29 11 x 5 8 40 43 4248634 20PG 29 28 x 3 8 40 43 4248612 20

Hinweis: Weitere Mehrloch-Dichteinsätze auf AnfragePassende Gegenmuttern Seite 143

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Note: Further multi-hole seal inserts on requestSuitable lock nuts page 143

Page 101: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

99

Aussen- Anzahl Loch- E SW 1 SW 2 L Art.-Nr. VEgewinde durchmesser mm mm mm mm Stck.

mmOuter Quantity Hole E SW 1 SW 2 L Art. no. PUthread diameter mm mm mm mm pcs.

mm

KabelverschraubungWADI-TEC DuploMessing vernickeltMehrlochdichtungmetrisches Gewinde, kurz

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Dichtung: Tefabloc• 4: Dichtung für Außengewinde: NitrilKennzeichen:• metrisches Gewinde• kurzes Gewinde• lange Mehrloch-Dichtung

Cable glandWADI-TEC Duplonickel-plated brassmulti-holed sealmetric short thread

Eigenschaften:• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

MS120°

–-25°

IP 68

Hinweis: Weitere Mehrloch-Dichteinsätze auf Anfrage* langes Gewinde (15 mm) auf Anfrage lieferbarPassende Gegenmuttern Seite 143

M 16 x 1,5 2 x 1 7 17 17 13 4249600 50M 16 x 1,5 2 x 3 7 17 17 13 4249601 50M 16 x 1,5 2 x 3,5 7 17 17 13 4249602 50M 16 x 1,5 2 x 4 7 17 17 13 4249603 50M 16 x 1,5 3 x 3 7 17 17 13 4249604 50M 20 x 1,5 2 x 2,3 7 20 22 28 4249610 50M 20 x 1,5 2 x 3 7 22 22 29 4249611 50M 20 x 1,5 2 x 3,5 7 20 22 28 4249612 50M 20 x 1,5 2 x 4 7 20 22 28 4249613 50M 20 x 1,5 2 x 5 7 22 22 29 4249614 50M 20 x 1,5 2 x 6 7 22 22 29 4249615 50M 20 x 1,5 3 x 2 7 22 22 29 4249616 50M 20 x 1,5 3 x 3 7 22 22 29 4249617 50M 20 x 1,5 3 x 3,5 7 20 22 28 4249618 50M 20 x 1,5 3 x 4 7 22 22 29 4249619 50M 20 x 1,5 3 x 5,3 7 22 22 29 4249620 50M 20 x 1,5 4 x 1,5 7 20 22 28 4249621 50M 20 x 1,5 4 x 3 7 22 22 29 4249622 50M 20 x 1,5 4 x 3,5 7 20 22 28 4249623 50M 20 x 1,5 4 x 4 7 22 22 29 4249624 50M 20 x 1,5 6 x 2 7 20 22 28 4249625 50M 20 x 1,5 6 x 2,5 7 20 22 28 4249626 50M 20 x 1,5 6 x 3,5 7 22 22 29 4249627 50M 20 x 1,5 10 x 2 7 22 22 29 4249628 50M 25 x 1,5 2 x 4 8 24 26 31 4249640 20M 25 x 1,5 2 x 4,5 8 30 30 37 4249641 20M 25 x 1,5 2 x 5 8 24 26 31 4249642 20M 25 x 1,5 2 x 6 8 24 26 31 4249643 20M 25 x 1,5 2 x 7 8 24 26 31 4249644 20M 25 x 1,5 2 x 8 8 30 30 37 4249645 20M 25 x 1,5 3 x 3 8 24 26 31 4249646 20M 25 x 1,5 3 x 4 8 24 26 31 4249647 20M 25 x 1,5 3 x 5 8 24 26 31 4249648 20M 25 x 1,5 3 x 5,6 8 24 26 31 4249649 20M 25 x 1,5 3 x 6 8 24 26 31 4249650 20M 25 x 1,5 3 x 7 8 30 30 37 4249651 20M 25 x 1,5 3 x 8 8 30 30 37 4249652 20M 25 x 1,5 4 x 4 8 24 26 31 4249653 20M 25 x 1,5 4 x 5 8 30 30 37 4249654 20M 25 x 1,5 4 x 6 8 30 30 37 4249655 20M 25 x 1,5 5 x 4 8 24 26 31 4249656 20M 25 x 1,5 5 x 5 8 30 30 37 4249657 20

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Metrisches Gewinde, kurz* / metric thread, short*

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Seal: Tefabloc• 4: Seal for outer thread: NitrilCharacteristics:• metric thread• short thread• long multi-holed seal

Features:• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

Note: Further multi-hole seal inserts on request* long thread (15 mm) available on requestSuitable lock nuts page 143

Page 102: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

100

Aussen- Anzahl Loch- E SW 1 SW 2 L Art.-Nr. VEgewinde durchmesser mm mm mm mm Stck.

mmOuter Quantity Hole Thread SW 1 SW 2 L Art. no. PUthread diameter length mm mm mm pcs.

mm

Hinweis: Weitere Mehrloch-Dichteinsätze auf AnfragePassende Gegenmuttern Seite 143

M 25 x 1,5 5 x 6 8 30 30 37 4249658 20M 25 x 1,5 5 x 6,5 8 30 30 37 4249659 20M 25 x 1,5 6 x 4 8 30 30 37 4249660 20M 25 x 1,5 6 x 5 8 30 30 37 4249661 20M 25 x 1,5 8 x 4 8 30 30 37 4249662 20M 25 x 1,5 8 x 5 8 30 30 37 4249663 20M 25 x 1,5 21 x 2 8 30 30 37 4249664 20M 32 x 1,5 2 x 4,5 8,5 30 33 38 4249670 20M 32 x 1,5 2 x 8 8,5 30 33 38 4249671 20M 32 x 1,5 2 x 9 8,5 40 40 45 4249672 20M 32 x 1,5 2 x 11 8,5 40 40 45 4249673 20M 32 x 1,5 2 x 12 8,5 40 40 45 4249674 20M 32 x 1,5 3 x 7 8,5 30 33 38 4249675 20M 32 x 1,5 3 x 8 8,5 30 33 38 4249676 20M 32 x 1,5 3 x 9 8,5 40 40 45 4249677 20M 32 x 1,5 3 x 11 8,5 40 40 45 4249678 20M 32 x 1,5 4 x 5 8,5 30 33 38 4249679 20M 32 x 1,5 4 x 6 8,5 30 33 38 4249680 20M 32 x 1,5 4 x 8 8,5 40 40 45 4249681 20M 32 x 1,5 4 x 9 8,5 40 40 45 4249682 20M 32 x 1,5 4 x 10 8,5 40 40 45 4249683 20M 32 x 1,5 5 x 5 8,5 30 33 38 4249684 20M 32 x 1,5 5 x 6 8,5 30 33 38 4249685 20M 32 x 1,5 5 x 6,5 8,5 30 33 38 4249686 20M 32 x 1,5 6 x 4 8,5 30 33 38 4249687 20M 32 x 1,5 6 x 5 8,5 30 33 38 4249688 20M 32 x 1,5 6 x 6 8,5 40 40 45 4249689 20M 32 x 1,5 6 x 6,5 8,5 40 40 45 4249690 20M 32 x 1,5 6 x 7 8,5 40 40 45 4249691 20M 32 x 1,5 7 x 6 8,5 40 40 45 4249692 20M 32 x 1,5 7 x 7 8,5 40 40 45 4249693 20M 32 x 1,5 8 x 4 8,5 30 33 38 4249694 20M 32 x 1,5 8 x 5 8,5 40 40 45 4249695 20M 32 x 1,5 8 x 6 8,5 40 40 45 4249696 20M 32 x 1,5 10 x 6 8,5 40 40 45 4249697 20M 32 x 1,5 11 x 5 8,5 40 40 45 4249698 20M 32 x 1,5 21 x 2 8,5 30 33 38 4249699 20M 32 x 1,5 28 x 3 8,5 40 40 45 4249700 20

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Note: Further multi-hole seal inserts on requestSuitable lock nuts page 143

Page 103: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

101

Aussen- Klemm- Art.-Nr. E SW 1 SW 2 L VE**gewinde bereich mm mm mm mm Stck.

mmOuter Clamping Art. no. E SW 1 SW 2 L PU**thread range mm mm mm mm pcs.

mm

KabelverschraubungWADI-TECEdelstahlINOX 316L

Material:• 1/3: Verschraubungskörper/

Hutmutter: Edelstahl• 2: Dichtung: Santopren• 4: Dichtung für Außengewinde: Nitril• 5: ECA-Klemmring: PolycarbonatKennzeichen:• PG-/metrisches Gewinde• ECA-Klemmring

Cable glandWADI-TECstainless steel INOX 316L

PG / PGPG 7 3-6 4222075 15 14 14 34 20PG 9 5-8 4222091 15 17 17 34 20PG 11 6-10 4222113 15 20 20 35 20Pg 13,5 8-12 4222130 15 22 22 36,5 10PG 16 9,5-14 4222164 15 24 24 38,5 10PG 21 11,5-18 4222210 15 30 30 43 5PG 29 15-24 4222296 15 40 40 50 5PG 36* 23-30 4222369 18 50 50 59 1PG 42* 26-35 4222423 18 58 58 65 1PG 48* 35-40 4222482 18 64 64 67 1

metrisch / metricM 12x1,5 3-6 4222012 13 14 14 33 20M 16x1,5/7 3-6 4222016 13 14 17 33 20M 16x1,5/9 5-8 4222017 13 17 17 33 20M 20x1,5/11 6-10 4222020 13 20 22 34 10M 20x1,5/13 8-12 4222021 13 22 22 35 10M 25x1,5/16 9,5-14 4222025 14 24 26 37 5M 25x1,5/21 11,5-18 4222026 14 30 30 43 5M 32x1,5/21 11,5-18 4221032 14,5 30 33 44 1M 32x1,5/29 15-24 4222033 14,5 40 40 51 1M 40 x 1,5 15-24 4222041 14,5 40 42 51 1M 50 x 1,5 23-30 4222050 15,5 50 55 57 1M 63 x 1,5 26-35 4222063 16,5 58 70 64 1

Weitere Dichteinsätze auf Anfrage / further sealing inserts on request

Eigenschaften:• säure- und laugenbeständig• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen Dichteinsätzen

kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau und Installationstechnik

EST120°

–-25°

IP 68

Material:• 1/3: Gland element/Cap nut:

Stainless steel• 2: Seal: Santoprene• 4: Seal for outer thread: Nitril• 5: ECA-Clamping-Ring:

PolycarbonateCharacteristics:• PG-/metric thread• ECA clamping ring

Features:• acid and lye resistant• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

*) Klemmringe aus Polyoxymetylen (POM)Dauergebrauchstemperatur -30°C bis 95°C

**) Hinweis: Auch Einzelabnahme möglichPassende Gegenmuttern Seite 145

*) Clamping ring made of polyoxymethylene (POM)Permanent use temperature -30°C to 95°C

**) Note: single purchase possibleSuitable lock nuts page 145

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 104: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

102

ATEX Kabelverschraubung

WADI-TEC ATEXPolyamid PA 6WADI-TEC ATEXPolyamide PA 6

ATEX Cable gland

L.C.I.E ATEX

Polyamid PA 6 Polyamide PA 6

MessingBrass

MaterialMaterial

WADI-TEC ATEXWADI-TEC ATEX

SCHLEMMER-TEC ATEXSCHLEMMER-TEC ATEX

WADI-TEC ATEXWADI-TEC ATEX

WADI-TEC ATEXWADI-TEC ATEX

BezeichnungType

Met

risch

Met

ric

PG PG NPT

NPT

kurz

es G

ewin

de

shor

t thr

ead

lang

es G

ewin

de

long

thre

ad

einf

ache

r Di

chtr

ing

plai

n se

alin

g rin

g

auss

chne

idba

rer

Dich

trin

g

punc

habl

e se

alin

g rin

g

ECA

Klem

mkä

fig

ECA

clam

ping

rin

g

• • • •• • •

• • •• • •

• • • •• • • •

• • • •• • • •

• • •• • •

• • •• • •

• • • •• • • •

• • • •• • • •

• • • •• • • •

• • • •• • • •

• • • •• • • •

• • •• • •

• • •• • •

• • •

SCHLEMMER-TEC ATEXPolyamid PA 6SCHLEMMER-TEC ATEXPolyamide PA 6

WADI-TEC ATEXMessing vernickeltWADI-TEC ATEXnickel-plated brass

Ausführungen / Versions

SCHLEMMER-TEC ATEXMessing vernickeltSCHLEMMER-TEC ATEXnickel-plated brass

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 105: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich E SW L Art.-Nr. Art.-Nr. VEmm mm mm mm silbergrau tiefschwarz Stck.

RAL 7001 RAL 9005Outer thread Clamping range E SW L Art. no. Art. no. PU

mm mm mm mm silver grey jet black pcs.RAL 7001 RAL 9005

ATEXKabelverschraubungWADI-TECPolyamidECA-Klemmring

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid PA 6, 25 % glasfaserverstärkt

• 2: ECA-Klemmring: Polycarbonat• 4: Dichtung: NeoprenKennzeichen:• PG-/metrisches Gewinde• kurzes/langes Gewinde• Zugentlastung durch Klemmring• ausschneidbarer Dichtring

ATEXCable glandWADI-TECPolyamideECA clamping ring

• Verschraubung muss mit Flach-dichtung und Gegenmutter montiertwerden

Anwendungsbereiche:• für den explosionsgefährdeten

Bereich nach EN 50014 und EN 50019

• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

PA 6GFK

L.C.I.E. ATEX55°

–-20°

IP 68

PG kurzes Gewinde / PG short threadPG 9 3,5 - 8,5 8 19 32 5507009 5507050 50PG 11 4,0 - 10,5 8 22 35 5507011 5507051 50PG 13,5 5,0 - 12,5 9 24 36 5507013 5507052 50PG 16 6,5 - 14,0 10 27 40 5507016 5507053 50PG 21 8,0 - 18,5 11 33 44 5507021 5507054 20PG 29 10,0 - 25,0 12 42 55 5507029 5507055 20

PG langes Gewinde / PG long threadPG 9 3,5 - 8,5 15 19 39 5507109 5507150 50PG 11 4,0 - 10,5 15 22 42 5507111 5507151 50PG 13,5 5,0 - 12,5 15 24 42 5507113 5507152 50PG 16 6,5 - 14,0 15 27 45 5507116 5507153 50PG 21 8,0 - 18,5 15 33 49 5507121 5507154 20PG 29 10,0 - 25,0 15 42 58 5507129 5507155 20PG 36 24,0 - 34,0 18 55 65 5507136 5507156 10PG 42 34,0 - 42,0 18 65 68 5507142 5507157 5PG 48 40,0 - 48,0 18 70 68 5507148 5507158 5

metrisch kurzes Gewinde / metric short threadM 16 x 1,5 3,5 - 8,5 8 19 32 5507216 5507250 50M 20 x 1,5/13 5,0 - 12,5 9 24 36 5507220 5507251 50M 20 x 1,5/16 6,5 - 14,0 9 27 39 5507221 5507252 50M 25 x 1,5 8,0 - 18,5 11 33 44 5507225 5507253 20M 32 x 1,5 10,0 - 25,0 12 42 55 5507232 5507254 20

metrisch langes Gewinde / metric long threadM 16 x 1,5 3,5 - 8,5 15 19 39 5507316 5507360 50M 20 x 1,5 5,0 - 12,5 15 24 42 5507320 5507361 50M 20 x 1,5/13 6,5 - 14,0 15 27 45 5507321 5507362 50M 25 x 1,5/16 8,0 - 18,5 15 33 49 5507325 5507363 20M 32 x 1,5 10,0 - 25,0 15 42 58 5507332 5507364 20M 40 x 1,5 24,0 - 34,0 15 55 62 5507340 5507365 20M 50 x 1,5 34,0 - 42,0 15 65 65 5507350 5507366 10M 63 x 1,5 40,0-48,0 15 70 65 5507351 5507367 5

Passende Gegenmuttern Seite 143Passende Flachdichtungen Seite 189

Material:• 1/3: Gland element/Cap nut:

Polyamide 6, 25 % glassfiber reinforced

• 2: ECA-Clamping-Ring: Polycarbonate

• 4: Seal: NeopreneCharacteristics:• PG-/metric thread• short/long thread• strain relief through clamping ring• punchable sealing ring

• Gland has to be mounted with flatseal and lock nut

Applications:• for explosion endangered areas

according to EN 50014 andEN 50019

• machines and devices• measuring and control engineering• plant installations

Suitable lock nuts page 143Suitable flat seals page 189

103

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 106: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich E SW 1 SW 2 L Art.-Nr. VEmm mm mm mm mm Stck

Outer thread Clamping range E SW 1 SW 2 L Art. no. PUmm mm mm mm mm pcs.

ATEXKabelverschraubungWADI-TECMessing vernickeltECA-Klemmring

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: ECA-Klemmring: Polycarbonat• 4: Dichtung: Neopren• 5: Dichtung für Außengewinde: NitrilKennzeichen:• PG-/metrisches Gewinde• kurzes/langes Gewinde• einfacher Dichtring• Verschraubung muss mit Flach-

dichtung und Gegenmutter montiertwerden

ATEXCable glandWADI-TECnickel-plated brassECA clamping ring

Anwendungsbereiche:• für den explosionsgefährdeten

Bereich• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

MS L.C.I.E. ATEX55°

–-20°

IP 68

PG kurzes Gewinde / PG short threadPG 7 3-6 5 14 14 24 4107407 50PG 9 5-8 6 17 17 25 4107409 50PG 11 6-10 6 20 20 26 4107411 50PG 13,5 8-12 6,5 22 22 28 4107413 50PG 16 9,5-14 6,5 24 24 30 4107416 25PG 21 11,5-18 7 30 30 35 4107421 25PG 29 15-24 8 40 40 43 4107429 10PG 36 23-30 9 50 50 50 4107436 10PG 42 26-35 10 58 58 57 4107442 5PG 48 35-40 10 64 64 59 4107448 5PG langes Gewinde / PG long threadPG 7 3-6 15 14 14 34 4107507 50PG 9 5-8 15 17 17 34 4107509 50PG 11 6-10 15 20 20 35 4107511 50PG 13,5 8-12 15 22 22 36,5 4107513 50PG 16 9,5-14 15 24 24 38,5 4107516 25PG 21 11,5-18 15 30 30 43 4107521 25PG 29 15-24 15 40 40 50 4107529 10PG 36 23-30 18 50 50 59 4107536 10PG 42 26-35 18 58 58 65 4107542 5PG 48 35-40 18 64 64 67 4107548 5metrisch kurzes Gewinde / metric short threadM 12 x 1,5 3-6 7 14 14 27 4107012 50M 16 x 1,5/7 3-6 7 14 17 27 4107016 50M 16 x 1,5/9 5-8 7 17 17 27 4107017 50M 20 x 1,5/11 6-10 7 20 22 28 4107020 50M 20 x 1,5/13 8-12 7 22 22 29 4107021 25M 25 x 1,5/16 9,5-14 8 24 26 31 4107025 25M 25 x 1,5/21 11,5-18 8 30 30 37 4107026 25M 32 x 1,5/21 11,5-18 8,5 30 33 38 4107032 25M 32 x 1,5/29 15-24 8,5 40 40 45 4107033 10M 40 x 1,5 15-24 8,5 40 42 45 4107040 10M 50 x 1,5 23-30 9,5 50 55 51 4107050 10M 63 x 1,5 26-35 10,5 58 70 58 4107063 5metrisch langes Gewinde / metric long threadM 12 x 1,5 3-6 13 14 14 33 4107112 50M 16 x 1,5/7 3-6 13 14 17 33 4107116 50M 16 x 1,5/9 5-8 13 17 17 33 4107117 50M 20 x 1,5/11 6-10 13 20 22 34 4107120 50M 20 x 1,5/13 8-12 13 22 22 35 4107121 25M 25 x 1,5/16 9,5-14 14 24 26 37 4107125 25M 25 x 1,5/21 11,5-18 14 30 30 43 4107126 25M 32 x 1,5/21 11,5-18 14,5 30 33 44 4107132 25M 32 x 1,5/29 15-24 14,5 40 40 51 4107133 10M 40 x 1,5 15-24 14,5 40 42 51 4107140 10M 50 x 1,5 23-30 15,5 50 55 57 4107150 10M 63 x 1,5 26-35 16,5 58 70 64 4107163 5

Passende Gegenmuttern Seite 143Passende Flachdichtungen Seite 189

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: ECA-Clamping-Ring:

Polycarbonate• 4: Seal: Neoprene• 5: Seal for outer thread: NitrilCharacteristics:• PG-/metric thread• short/long thread• simple sealing ring• Gland has to be mounted with

flat seal and lock nut

Applications:• for explosion endangered areas• machines and devices• measuring and control engineering• plant installations

Suitable lock nuts page 143Suitable flat seals page 189

104

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 107: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich E SW 1 SW 2 L Art.-Nr. VEmm mm mm mm mm Stck.

Outer thread Clamping range E SW 1 SW 2 L Art. no. PUmm mm mm mm mm pcs.

PG kurzes Gewinde / PG short threadPG 9 3 - 8,5 6 17 17 25 4107609 50PG 11 4 - 10,5 6 20 20 26 4107611 50PG 13,5 5 - 12,5 6,5 22 22 28 4107613 50PG 16 6,5 - 14,5 6,5 24 24 30 4107616 25PG 21 8 - 18,5 7 30 30 35 4107621 25PG 29 10 - 24,5 8 40 40 43 4107629 10

PG langes Gewinde / PG long threadPG 9 3 - 8,5 15 17 17 34 4107709 50PG 11 4 - 10,5 15 20 20 35 4107711 50PG 13,5 5 - 12,5 15 22 22 36,5 4107713 50PG 16 6,5 - 14,5 15 24 24 38,5 4107716 25PG 21 8 - 18,5 15 30 30 43 4107721 25PG 29 10 - 24,5 15 40 40 50 4107729 10

metrisch kurzes Gewinde / metric short threadM 16 x 1,5/9 3 - 8,5 7 17 17 27 4107216 50M 20 x 1,5/11 4 - 10,5 7 20 22 28 4107220 50M 20 x 1,5/13 5 - 12,5 7 22 22 29 4107221 25M 25 x 1,5/16 6,5 - 14,5 8 24 26 31 4107225 25M 25 x 1,5/21 8 - 18,5 8 30 30 37 4107226 25M 32 x 1,5/21 8 - 18,5 8,5 30 33 38 4107232 25M 32 x 1,5/29 10 - 24,5 8,5 40 40 45 4107233 10M 40 x 1,5 10 - 24,5 8,5 40 42 45 4107240 10

metrisch langes Gewinde / metric long threadM 16 x 1,5/9 3 - 8,5 13 17 17 33 4107316 50M 20 x 1,5/11 4 - 10,5 13 20 22 34 4107320 50M 20 x 1,5/13 5 - 12,5 13 22 22 35 4107321 25M 25 x 1,5/16 6,5 - 14,5 14 24 26 37 4107325 25M 25 x 1,5/21 8 - 18,5 14 30 30 43 4107326 25M 32 x 1,5/21 8 - 18,5 14,5 30 33 44 4107332 25M 32 x 1,5/29 10 - 24,5 14,5 40 40 51 4107333 10M 40 x 1,5 10 - 24,5 14,5 40 42 51 4107340 10

Passende Gegenmuttern Seite 143Passende Flachdichtungen Seite 189

Suitable lock nuts page 143Suitable flat seals page 189

105

ATEXKabelverschraubungWADI-TECMessing vernickeltECA-Klemmring

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: ECA-Klemmring: Polycarbonat• 4: Dichtung: Neopren• 5: Dichtung für Außengewinde: NitrilKennzeichen:• PG-/metrisches Gewinde• kurzes/langes Gewinde• ausschneidbarer Dichtring• Verschraubung muss mit Flach-

dichtung und Gegenmutter montiertwerden

ATEXCable glandWADI-TECnickel-plated brassECA clamping ring

Anwendungsbereiche:• für den explosionsgefährdeten

Bereich• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

MS L.C.I.E. ATEX55°

–-20°

IP 68

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: ECA-Clamping-Ring:

Polycarbonate• 4: Seal: Neoprene• 5: Seal for outer thread: NitrilCharacteristics:• PG-/metric thread• short/long thread• punchable sealing ring• Gland has to be mounted with flat

seal and lock nut

Applications:• for explosion endangered areas• machines and devices• measuring and control engineering• plant installations

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 108: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich E SW 1 SW 2 L Art.-Nr. VEmm mm mm mm mm Stck.

Outer thread Clamping range E SW 1 SW 2 L Art. no. PUmm mm mm mm mm pcs.

einfacher Dichtring / simple sealing ringNPT 3/8" 3 - 6 15 14 19 35 4107800 50NPT 3/8" 5 - 8 15 17 19 35 4107801 50NPT 1/2" 5 - 8 20 17 22 40 4107802 50NPT 1/2" 6 - 10 20 20 22 42 4107803 50NPT 1/2" 8 - 12 20 22 22 42 4107804 50NPT 3/4" 9,5 - 14 20 24 30 45 4107805 20NPT 3/4" 11,5 - 18 20 30 30 49 4107806 20NPT 1" 15 - 24 25 40 40 60 4107807 10NPT 1 1/4" 15 - 24 26 40 46 61 4107809 5NPT 1 1/2" 23 - 30 26 50 50 67 4107810 5NPT 1 1/2" 26 - 35 26 58 58 73 4107811 1NPT 2" 35 - 40 27 64 64 76 4107812 1

ausschneidbarer Dichtring / punchable sealing ringNPT 3/8" 3 - 8,5 15 17 19 35 4107850 50NPT 1/2" 3 - 8,5 20 17 22 40 4107851 50NPT 1/2" 4 - 10,5 20 20 22 42 4107852 50NPT 1/2" 5 - 12,5 20 22 22 42 4107853 50NPT 3/4" 6,5 - 14,5 20 24 30 45 4107854 20NPT 3/4" 8 - 18,5 20 30 30 49 4107855 20NPT 1" 10 - 24,5 25 40 40 60 4107856 10NPT 1 1/4" 10 - 24,5 25 40 46 61 4107857 5

Passende Gegenmuttern Seite 143Passende Flachdichtungen Seite 189

Suitable lock nuts page 143Suitable flat seals page 189

106

ATEXKabelverschraubungWADI-TECMessing vernickeltECA-Klemmring

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: ECA-Klemmring: Polycarbonat• 4: Dichtung: Neopren• 5: Dichtung für Außengewinde: NitrilKennzeichen:• NPT-Gewinde• einfacher/ausschneidbarer Dichtring• Verschraubung muss mit Flach-

dichtung und Gegenmutter montiertwerden

ATEXCable glandWADI-TECnickel-plated brassECA clamping ring

Anwendungsbereiche:• für den explosionsgefährdeten

Bereich• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

MS L.C.I.E. ATEX55°

–-20°

IP 68

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: ECA-Clamping-Ring:

Polycarbonate• 4: Seal: Neoprene• 5: Seal for outer thread: NitrilCharacteristics:• NPT-thread• simple/punchable sealing ring• Gland has to be mounted with flat

seal and lock nut

Applications:• for explosion endangered areas• machines and devices• measuring and control engineering• plant installations

NPT-Gewinde / NPT-thread

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 109: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich E SW L Art.-Nr. Art.-Nr. VEmm mm mm mm silbergrau tiefschwarz Stck.

RAL 7001 RAL 9005Outer thread Clamping range E SW L Art. no. Art. no. PU

mm mm mm mm silver grey jet black pcs.RAL 7001 RAL 9005

ATEXKabelverschraubungWADI-TECPolyamid

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid PA 6, 25 % glasfaserverstärkt

• 2: Dichtung: NeoprenKennzeichen:• PG-/metrisches Gewinde• kurzes/langes Gewinde• einfacher Dichtring• Verschraubung muss mit Flach-

dichtung und Gegenmutter montiertwerden

ATEXCable glandWADI-TECPolyamide

Anwendungsbereiche:• für den explosionsgefährdeten

Bereich nach EN 50014 und EN 50019

• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

PA 6GFK

L.C.I.E.55°

–-20°

IP 68

PG, kurzes Gewinde / PG, short threadPG 9 4,5 - 8,0 8 19 32 5508009 5508050 50PG 11 5,5 - 10,5 8 22 35 5508011 5508051 50PG 13,5 7,0 - 12,0 9 24 36 5508013 5508052 50PG 16 9,0 - 14,0 10 27 40 5508016 5508053 50PG 21 11,5 - 18,0 11 33 44 5508021 5508054 20PG 29 16,0 - 24,5 12 42 50 5508029 5508055 20

PG, langes Gewinde / PG, long threadPG 9 4,5 - 8,0 15 19 39 5508109 5508150 50PG 11 5,5 - 10,5 15 22 42 5508111 5508151 50PG 13,5 7,0 - 12,0 15 24 42 5508113 5508152 50PG 16 9,0 - 14,0 15 27 45 5508116 5508153 50PG 21 11,5 - 18,0 15 33 49 5508121 5508154 20PG 29 16,0 - 24,5 15 42 58 5508129 5508155 20

metrisch, kurzes Gewinde / metric, short threadM 16 x 1,5 4,5 - 8,0 8 19 32 5808216 5808250 50M 20 x 1,5/13 7,0 - 12,0 9 24 36 5808220 5808251 50M 20 x 1,5/16 9,0 - 14,0 9 27 39 5808221 5808252 50M 25 x 1,5 11,5 - 18,0 11 33 44 5808225 5808253 20M 32 x 1,5 16,0 - 24,5 12 42 55 5808232 5808254 20

metrisch, langes Gewinde / metric, long threadM 16 x 1,5 4,5 - 8,0 15 19 39 5808316 5808360 50M 20 x 1,5/13 7,0 - 12,0 15 24 42 5808320 5808361 50M 20 x 1,5/16 9,0 - 14,0 15 27 45 5808321 5808362 50M 25 x 1,5 11,5 - 18,0 15 33 48 5808325 5808363 20M 32 x 1,5 16,0 - 24,5 15 42 58 5808332 5808364 20

Passende Gegenmuttern Seite 143Passende Flachdichtungen Seite 189

Material:• 1/3: Gland element/Cap nut:

Polyamide 6, 25 % glassfiber reinforced

• 2: Seal: NeopreneCharacteristics:• PG-/metric thread• short/long thread• simple sealing ring• Gland has to be mounted with flat

seal and lock nut

Applications:• for explosion endangered areas

according to EN 50014 andEN 50019

• machines and devices• measuring and control engineering• plant installations

Suitable lock nuts page 143Suitable flat seals page 189

107

ATEX

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 110: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Passende Gegenmuttern Seite 143Passende Flachdichtungen Seite 189

Aussen- Klemm- E SW L Art.-Nr. Art.-Nr. Art.-Nr. Art.-Nr. VEgewinde bereich mm mm mm hellgrau silbergrau tiefschwarz blau Stck.

mm RAL 7035 RAL 7001 RAL 9005 RAL 5012Outer thread Clamping E SW L Art. no. Art. no. Art. no. Art. no. PU

range mm mm mm light grey silver grey jet black blue pcs.mm RAL 7035 RAL 7001 RAL 9005 RAL 5012

ATEXKabelverschraubungSCHLEMMER-TECPolyamid PA 6

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid PA 6• 2: Dichtung: NeoprenKennzeichen:• metrisches Gewinde• kurzes/langes Gewinde• Verschraubung muss mit Flach-

dichtung und Gegenmutter montiertwerden

PA 6

metrisch, kurzes Gewinde / metric, short threadM 12 x 1,5 2,5-6,5 8 15 32 5507500 5507520 5507540 5507560 auf Anfr./on req.M 16 x 1,5/9 2,8-8 10 19 37 5507501 5507521 5507541 5507561 auf Anfr./on req.M 16 x 1,5/11 3,5-10 10 22 39 5507502 5507522 5507542 5507562 auf Anfr./on req.M 20 x 1,5/13 5-12 10 24 40 5507503 5507523 5507543 5507563 auf Anfr./on req.M 20 x 1,5/16 7-14 10 27 43 5507504 5507524 5507544 5507564 auf Anfr./on req.M 25 x 1,5/16 7-14 10 27 45 5507505 5507525 5507545 5507565 auf Anfr./on req.M 25 x 1,5/21 9-18 10 33 49 5507506 5507526 5507546 5507566 auf Anfr./on req.M 32 x 1,5 14-25 10 42 52 5507507 5507527 5507547 5507567 auf Anfr./on req.M 40 x 1,5 18-32 10 53 62 5507508 5507528 5507548 5507568 auf Anfr./on req.M 50 x 1,5 24-38,5 12 60 67 5507509 5507529 5507549 5507569 auf Anfr./on req.M 63 x 1,5 35-48 12 70 68 5507510 5507530 5507550 5507570 auf Anfr./on req.

metrisch, langes Gewinde / metric, long threadM 12 x 1,5 2,5-6,5 15 15 39 5507600 5507620 5507640 5507660 auf Anfr./on req.M 16 x 1,5/9 2,8-8 15 19 42 5507601 5507621 5507641 5507661 auf Anfr./on req.M 16 x 1,5/11 3,5-10 15 22 44 5507602 5507622 5507642 5507662 auf Anfr./on req.M 20 x 1,5/13 5-12 15 24 45 5507603 5507623 5507643 5507663 auf Anfr./on req.M 20 x 1,5/16 7-14 15 27 48 5507604 5507624 5507644 5507664 auf Anfr./on req.M 25 x 1,5/16 7-14 15 27 50 5507605 5507625 5507645 5507665 auf Anfr./on req.M 25 x 1,5/21 9-18 15 33 53 5507606 5507626 5507646 5507666 auf Anfr./on req.M 32 x 1,5 14-25 15 42 57 5507607 5507627 5507647 5507667 auf Anfr./on req.M 40 x 1,5 18-32 16 53 68 5507608 5507628 5507648 5507668 auf Anfr./on req.M 50 x 1,5 24-38,5 16 60 71 5507609 5507629 5507649 5507669 auf Anfr./on req.M 63 x 1,5 35-48 16 70 72 5507610 5507630 5507650 5507670 auf Anfr./on req.

Anwendungsbereiche:• für den explosionsgefährdeten

Bereich• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

IP 68

ATEXCable glandSCHLEMMER-TECPolyamide PA 6

Material:• 1/3: Gland element/Cap nut:

Polyamide PA 6• 2: Seal: NeopreneCharacteristics:• metric thread• short/long thread• Gland has to be mounted with flat

seal and lock nut

Applications:• for explosion endangered areas• machines and devices• measuring and control engineering• plant installations

108

55°–

-20°

Suitable lock nuts page 143Suitable flat seals page 189

Metrisches Gewinde / metric thread

L.C.I.E. ATEX

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 111: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Passende Gegenmuttern Seite 143Passende Flachdichtungen Seite 189

Aussen- Klemm- E SW L Art.-Nr. Art.-Nr. Art.-Nr. Art.-Nr. VEgewinde bereich mm mm mm lichtgrau silbergrau tiefschwarz blau Stck.

mm RAL 7035 RAL 7001 RAL 9005 RAL 5012Outer thread Clamping E SW L Art. no. Art. no. Art. no. Art. no. PU

range mm mm mm light grey silver grey jet black blue pcs.mm RAL 7035 RAL 7001 RAL 9005 RAL 5012

ATEXKabelverschraubungSCHLEMMER-TECPolyamid PA 6

Material:• 1/3: Verschraubungskörper/

Hutmutter: Polyamid PA 6• 2: Dichtung: NeoprenKennzeichen:• PG-/NPT-Gewinde• Verschraubung muss mit Flach-

dichtung und Gegenmutter montiertwerden

PA 6

PG / PGPG 7 2,5-6,5 8 15 32 5507400 5507410 5507420 5507430 auf Anfr./on req.PG 9 2,5-8 8 19 35 5507401 5507411 5507421 5507431 auf Anfr./on req.PG 11 3,5-10 8 22 37 5507402 5507412 5507422 5507432 auf Anfr./on req.PG 13,5 5-12 9 24 39 5507403 5507413 5507423 5507433 auf Anfr./on req.PG 16 7-14 10 27 43 5507404 5507414 5507424 5507434 auf Anfr./on req.PG 21 9-18 11 33 50 5507405 5507415 5507425 5507435 auf Anfr./on req.PG 29 14-25 11 42 53 5507406 5507416 5507426 5507436 auf Anfr./on req.PG 36 18-32 13 53 65 5507407 5507417 5507427 5507437 auf Anfr./on req.PG 42 24-38,5 13 60 68 5507408 5507418 5507428 5507438 auf Anfr./on req.PG 48 35-48 14 70 70 5507409 5507419 5507429 5507439 auf Anfr./on req.

NPT / NPTNPT 3/8" 2,5-8 11 19 38 5507700 5507720 5507740 5507760 auf Anfr./on req.NPT 1/2" 5-12 14 24 44 5507701 5507721 5507741 5507761 auf Anfr./on req.NPT 3/4" 9-18 15 33 54 5507702 5507722 5507742 5507762 auf Anfr./on req.NPT 1" 14-25 18 42 60 5507703 5507723 5507743 5507763 auf Anfr./on req.

Anwendungsbereiche:• für den explosionsgefährdeten

Bereich• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

IP 68

ATEXCable glandSCHLEMMER-TECPolyamide PA 6

Material:• 1/3: Gland element/Cap nut:

Polyamide PA 6• 2: Seal: NeopreneCharacteristics:• PG-/NPT thread• Gland has to be mounted with flat

seal and lock nut

Applications:• for explosion endangered areas• machines and devices• measuring and control engineering• plant installations

109

55°–

-20°

Suitable lock nuts page 143Suitable flat seals page 189

L.C.I.E. ATEX

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 112: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Passende Gegenmuttern Seite 143Passende Flachdichtungen Seite 189

Aussengewinde Klemmbereich E SW 1 SW 2 L Art.-Nr. VEmm mm mm mm mm Stck.

Outer thread Clamping range E SW 1 SW 2 L Art. no. PUmm mm mm mm mm pcs.

ATEXKabelverschraubungSCHLEMMER-TECMessing vernickelt

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Dichtung: Neopren• 4: Dichtung für Außengewinde: Nitril• 5: Einsatz: Polyamid 6Kennzeichen:• metrisches Gewinde• kurzes/langes Gewinde

MS

metrisch, kurzes Gewinde / metric, short threadM 12 x 1,5 3,5-6,5 5 14 14 25 4108012 auf Anfr./on req.M 16 x 1,5 5-9,5 5 17 17 28 4108016 auf Anfr./on req.M 20 x 1,5 8-13 6 22 22 32 4108020 auf Anfr./on req.M 25 x 1,5 9-16 7 27 27 35 4108025 auf Anfr./on req.M 32 x 1,5 12-21 8 34 34 38 4108032 auf Anfr./on req.M 40 x 1,5 16-27 8 42 42 41 4108040 auf Anfr./on req.M 50 x 1,5 23-35 9 55 55 46 4108050 auf Anfr./on req.M 63 x 1,5 36-48 10 65 65 54 4108063 auf Anfr./on req.

metrisch, langes Gewinde / metric, long threadM 12 x 1,5 3,5-6,5 15 14 14 35 4108112 auf Anfr./on req.M 16 x 1,5 5-9,5 15 17 17 38 4108116 auf Anfr./on req.M 20 x 1,5 8-13 15 22 22 41 4108120 auf Anfr./on req.M 25 x 1,5 9-16 15 27 27 43 4108125 auf Anfr./on req.M 32 x 1,5 12-21 15 34 34 45 4108132 auf Anfr./on req.M 40 x 1,5 16-27 15 42 42 48 4108140 auf Anfr./on req.M 50 x 1,5 23-35 15 55 55 52 4108150 auf Anfr./on req.M 63 x 1,5 36-48 15 65 65 59 4108163 auf Anfr./on req.

• Verschraubung muss mit Flach-dichtung und Gegenmutter montiertwerden

Anwendungsbereiche:• für den explosionsgefährdeten

Bereich• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

IP 68

ATEXCable glandSCHLEMMER-TECnickel-plated brass

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Seal: Neoprene• 4: Seal for outer thread: Nitril• 5: Insert: Polyamide 6Characteristics:• metric thread• short/long thread

• Gland has to be mounted with flatseal and lock nut

Applications:• for explosion endangered areas• machines and devices• measuring and control engineering• plant installations

110

55°–

-20°

Suitable lock nuts page 143Suitable flat seals page 189

L.C.I.E. ATEX

Metrisches Gewinde / metric thread

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

5

Page 113: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Passende Gegenmuttern Seite 143Passende Flachdichtungen Seite 189

Aussengewinde Klemmbereich E SW 1 SW 2 L Art.-Nr. VEmm mm mm mm mm Stck.

Outer thread Clamping range E SW 1 SW 2 L Art. no. PUmm mm mm mm mm pcs.

ATEXKabelverschraubungSCHLEMMER-TECMessing vernickelt

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Dichtung: Neopren• 4: Dichtung für Außengewinde: Nitril• 5: Einsatz: Polyamid 6Kennzeichen:• PG-/NPT-Gewinde• kurzes/langes Gewinde• Verschraubung muss mit Flach-

dichtung und Gegenmutter montiertwerden

MS

PG, kurzes Gewinde / PG, short threadPG 7 3,5-6,5 5 14 14 25 4108207 auf Anfr./on req.PG 9 5-9,5 6 17 17 29 4108209 auf Anfr./on req.PG 11 7-11,5 6 20 20 30 4108211 auf Anfr./on req.PG 13,5 8-13 6,5 22 22 32,5 4108213 auf Anfr./on req.PG 16 9-15 6,5 24 24 34 4108216 auf Anfr./on req.PG 21 12-19 7 30 30 35 4108221 auf Anfr./on req.PG 29 17-26 8 40 40 38 4108229 auf Anfr./on req.PG 36 23-34,5 9 50 50 42 4108236 auf Anfr./on req.PG 42 28-40 10 58 58 47 4108242 auf Anfr./on req.PG 48 36-48 10 65 65 54 4108248 auf Anfr./on req.

PG, langes Gewinde / PG, long threadPG 7 3,5-6,5 15 14 14 35 4108307 auf Anfr./on req.PG 9 5-9,5 15 17 17 38 4108309 auf Anfr./on req.PG 11 7-11,5 15 20 20 39 4108311 auf Anfr./on req.PG 13,5 8-13 15 22 22 41 4108313 auf Anfr./on req.PG 16 9-15 15 24 24 42,5 4108316 auf Anfr./on req.PG 21 12-19 15 30 30 43 4108321 auf Anfr./on req.PG 29 17-26 15 40 40 45 4108329 auf Anfr./on req.PG 36 23-34,5 15 50 50 48 4108336 auf Anfr./on req.PG 42 28-40 15 58 58 52 4108342 auf Anfr./on req.PG 48 36-48 15 65 65 59 4108348 auf Anfr./on req.

NPT / NPTNPT 3/8" 5-9,5 15 17 18 38 4108400 auf Anfr./on req.NPT 1/2" 8-13 20 22 23 46 4108401 auf Anfr./on req.NPT 3/4" 9-16 20 27 28 48 4108402 auf Anfr./on req.NPT 1" 12-21 25 34 36 55 4108403 auf Anfr./on req.

Anwendungsbereiche:• für den explosionsgefährdeten

Bereich• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

IP 68

ATEXCable glandSCHLEMMER-TECnickel-plated brass

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Seal: Neoprene• 4: Seal for outer thread: Nitril• 5: Insert: Polyamide 6Characteristics:• PG-/NPT thread• short/long thread• Gland has to be mounted with flat

seal and lock nut

Applications:• for explosion endangered areas• machines and devices• measuring and control engineering• plant installations

111

55°–

-20°

Suitable lock nuts page 143Suitable flat seals page 189

L.C.I.E. ATEX

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

5

Page 114: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

112

EMV-KabelverschraubungMessing vernickelt

WADI-EMV-ECA / WADI-EMC-ECA EMV Serie 85 / EMC series 85 SIB 800 / SIB 800

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

EMC-Cable gland nickel-brass plated

IP 68

MessingBrass

MaterialMaterial

Wadi-TEC

EMV mit Federzungen /EMC with spring-contactsSerie 85

SIB 800

• • •• • •

• • •• •

• •• •

• •

Met

risch

Met

ric

PG PG NPT

NPT

kurz

es G

ewin

de

shor

t thr

ead

lang

es G

ewin

de

long

thre

ad

ECA

Klem

mkä

fig

ECA

clam

ping

rin

g

Ausführungen / Versions

EMV mit Federzungen / EMC with spring-contacts

Page 115: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Klemmbereich Klemmbereich E SW 1 SW 2 Art.-Nr. VEfür Kabel für Beflechtung mm mm mm Stck.mm mm

Outer thread Clamping range Clamping range E SW 1 SW 2 Art. no. PUfor cable for screening mm mm mm pcs.mm mm

EMV-KabelverschraubungWADI-TECMessing vernickelt

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Klemmring für Erdung:

Kunststoff verzinnt• 4: Dichtung: Tefabloc• 5: Dichtung für Außengewinde: NitrilKennzeichen:• PG/metrisches Gewinde

EMC-Cable glandWADI-TECnickel-plated brass

Eigenschaften:• durchgehender EMV-Schutz durch

verzinnten Klemmring• gas- und wasserdicht• durchgehend mit Verdrehschutz• mit unterschiedlichen

Dichteinsätzen kombinierbarAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

MS120°

–-25°

IP 68

PG / PGPG 7 4 - 6,5 4 - 6,5 5 14 14 4264007 50PG 9 5 - 8,5 4,5 - 8,5 6 17 17 4264009 50PG 11 7 - 10,5 6 - 10,5 6 20 20 4264011 50PG 13 8 - 12,5 8 - 12,5 6,5 22 22 4264013 50PG 16 10 - 14,5 10 - 14,5 6,5 24 24 4264016 20PG 21 13,5 - 18 13,5 - 18 7 30 30 4264021 20PG 29 17 - 24 17 - 24 8 40 40 4264029 10

metrisch, kurzes Gewinde / metric, short threadM 12 x 1,5/7 4 - 6,5 4 - 6,5 7 14 14 4264112 50M 16 x 1,5/7 4 - 6,5 4 - 6,5 7 14 17 4264116 50M 16 x 1,5/9 5 - 8,5 4,5 - 8,5 7 17 17 4264117 50M 20 x 1,5/11 7 - 10,5 6 - 10,5 7 20 22 4264120 50M 20 x 1,5/13 8 - 12,5 8 - 12,5 7 22 22 4264121 50M 25 x 1,5/16 10 - 14,5 10 - 14,5 8 24 26 4264125 20M 25 x 1,5/21 13,5 - 18 13,5 - 18 8 30 30 4264126 20M 32 x 1,5/21 13,5 - 18 13,5 - 18 8,5 30 33 4264132 10M 32 x 1,5/29 17 - 24 17 - 24 8,5 40 40 4264133 10

metrisch, langes Gewinde / metric, long threadM 16 x 1,5/9 5 - 8,5 4,5 - 8,5 13 17 17 4264217 50M 20 x 1,5/13 8 - 12,5 8 - 12,5 13 22 22 4264221 50M 25 x 1,5/21 13,5 - 18 13,5 - 18 14 30 30 4264226 25M 32 x 1,5/29 17 - 24 17 - 24 14,5 40 40 4264232 10

Passende Gegenmuttern Seite 144

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Clamping-Ring for grounding:

tin-plated plastic• 4: Seal: Tefabloc• 5: Seal for outer thread: NitrilCharacteristics:• PG/metric thread

Features:• continuous EMC protection due to

tin-plated clamping ring• gas and water-tight• completely twist protected• combinable with various sealing

insertsApplications:• machines and devices• measuring and control engineering• plant installations

Suitable lock nuts page 144

113

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 116: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Type Klemmbereich SW 1 SW 2 E Art.-Nr. VEmm mm mm mm Stck.

Outer thread Type Clamping range SW 1 SW 2 E Art. no. PUmm mm mm pcs.

EMV-Kabelverschraubungmit FederzungenMessing vernickelt

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Klemmring: Polyamid 6• 4: Dichtung: Neopren• 5: Dichtung für Außengewinde: NBRKennzeichen:• metrisches Gewinde

M 12 x 1,5 4 - 8 14 14 6,5 4264312 50M 16 x 1,5 5 - 10 18 17 7 4264316 50M 20 x 1,5 6 - 12 22 22 8 4264320 50M 25 x 1,5 10 - 14 27 24 8 4264325 25M 32 x 1,5 13 - 18 34 30 9 4264332 25M 40 x 1,5 18 - 25 43 40 9 4264140 20M 50 x 1,5 22 - 32 55 50 10 4264150 15M 63 x 1,5 34 - 44 68 64 15 4264163 12

Anwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik•Anlagenbau

MS

EMC-Cable glandwith spring-contacts nickel-plated brass

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Clamping-Ring:

Polyamide 6• 4: Seal: Neoprene• 5: Seal for outer thread: NBRCharacteristics:• metric thread

Applications:• machines and devices• measuring and control engineering• plant installations

114

100°–

-40°IP 68

Metrisches Gewinde / metric thread

Passende Gegenmutter Seite 144 Suitable lock nuts page 144

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 117: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Features:• screen contact through clamping

chuck with integrated clamp protection

• vibration-safe, tear-resistantApplications:• machines and devices• measuring and control engineering• plant installations

Aussengewinde Klemmbereich Klemmbereich E SW H Art.-Nr. VEfür Kabel für Beflechtung mm mm mm Stck.mm mm

Outer thread Clamping range Clamping range E SW H Art. no. PUfor cable for screening mm mm mm pcs.mm mm

EMV-KabelverschraubungenSerie 85Messing vernickeltPG-Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Dichtung: Perbunan N• 4: Dichtung für Außengewinde: NitrilKennzeichen:• PG-Gewinde

EMC-Cable glandSeries 85nickel-plated brassPG-thread

Eigenschaften:• Schirmkontakt mittels

Spannzange mit eingebautemKlemmschutz

• vibrationssicher, ausreißfestAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

MS100°

–-40°

IP 68

PG 9 6 - 8 3,1 - 4 6 18 26 4276040 25PG 9 8 - 10 4,1 - 5 6 18 26 4276050 25PG 9 8 - 10 5,1 - 6 6 18 26 4276060 25PG 11 7 - 10 6,1 - 7 8 20/22 30 4276070 25PG 11 8 - 12 7,1 - 8 8 20/22 30 4276080 25PG 11 8 - 12 8,1 - 9 8 20/22 30 4276090 25PG 16 11 - 15 9,1 - 10 8 24 33 4276100 25PG 16 11 - 15 10,1 - 11 8 24 33 4276110 25PG 16 14 - 17 11,1 - 12 8 24/27 33 4276120 25PG 16 14 - 17 12,1 - 13 8 24/27 33 4276130 25PG 21 15 - 20,5 13,1 - 14 8 32 38 4276140 25PG 21 15 - 20,5 14,1 - 15 8 32 38 4276150 25PG 21 15 - 20,5 15,1 - 16 8 32 38 4276160 25PG 21 19 - 22 16,1 - 17 8 32 38 4276170 25PG 21 19 - 22 17,1 - 18 8 32 38 4276180 25PG 29 21 - 25,5 18,1 - 19,5 10 38 43 4276195 20PG 29 21 - 25,5 19,6 - 21 10 38 43 4276210 20PG 29 22 - 28 21,1 - 22,5 10 38/43 45 4276225 20PG 29 26 - 32 22,6 - 24 10 38/43 45 4276240 20PG 36 25 - 35 23,1 - 25 12 50 55 4276250 10PG 36 25 - 35 25,1 - 27 12 50 55 4276270 10PG 36 30 - 35 27,1 - 29 12 50 55 4276290 10PG 48 31 - 35 29,1 - 31 15 64 63 4276310 10PG 48 35 - 45 31,1 - 33 15 64 63 4276330 10PG 48 35 - 45 33,1 - 35 15 64 63 4276350 10PG 48 35 - 45 35,1 - 37 15 64 63 4276370 10

Passende Gegenmuttern Seite 144

PG-Gewinde / PG-thread

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Seal: Perbunan N• 4: Seal for outer thread: NitrilCharacteristics:• PG thread

Suitable lock nuts page 144

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

115

Page 118: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Features:• screen contact through clamping

chuck with integrated clamp protection

• vibration-safe, tear-resistantApplications:• machines and devices• measuring and control engineering• plant installations

Aussengewinde Klemmbereich Klemmbereich E SW H Art.-Nr. VEfür Kabel für Beflechtung mm mm mm Stck.mm mm

Outer thread Clamping range Clamping range E SW H Art. no. PUfor cable for screening mm mm mm pcs.mm mm

EMV-KabelverschraubungenSerie 85Messing vernickeltmetrisches Gewinde

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Dichtung: Perbunan N• 4: Dichtung für Außengewinde: NitrilKennzeichen:• metrisches Gewinde

EMC-Cable glandSeries 85nickel-plated brassmetric thread

Eigenschaften:• Schirmkontakt mittels

Spannzange mit eingebautemKlemmschutz

• vibrationssicher, ausreißfestAnwendungsbereiche:• Maschinen- und Apparatebau• Mess- und Regeltechnik• Anlagenbau

MS100°

–-40°

IP 68

M 16 x 1,5 7 - 8 3,1 - 4 6 18 26 4276413 25M 16 x 1,5 8 - 10 4,1 - 5 6 18 26 4276414 25M 16 x 1,5 8 - 10 5,1 - 6 6 18 26 4276415 25M 16 x 1,5 7,5 - 10 6,1 - 7 8 20/22 30 4276416 25M 16 x 1,5 8 - 12 7,1 - 8 8 20/22 30 4276417 25M 16 x 1,5 8 - 12 8,1 - 9 8 20/22 30 4276418 25M 20 x 1,5 11 - 15 9,1 - 10 8 24 33 4276420 25M 20 x 1,5 11 - 15 10,1 - 11 8 24 33 4276421 25M 20 x 1,5 14 - 17 11,1 - 12 8 24/27 33 4276422 25M 20 x 1,5 14 - 17 12,1 - 13 8 24/27 33 4276423 25M 25 x 1,5 15 - 20,5 13,1 - 14 8 32 38 4276425 25M 25 x 1,5 15 - 20,5 14,1 - 15 8 32 38 4276426 25M 25 x 1,5 15 - 20,5 15,1 - 16 8 32 38 4276427 25M 25 x 1,5 19 - 22 16,1 - 17 8 32 38 4276428 25M 25 x 1,5 19 - 22 17,1 - 18 8 32 38 4276429 25M 32 x 1,5 21 - 25,5 18,1 - 19,5 10 38 43 4276432 20M 32 x 1,5 21 - 25,5 19,6 - 21 10 38 43 4276433 20M 32 x 1,5 22 - 28 21,1 - 22,5 10 38/43 45 4276434 20M 32 x 1,5 26 - 32 22,6 - 24 10 38/43 45 4276435 20M 40 x 1,5 25 - 35 23,1 - 25 12 50 55 4276440 10M 40 x 1,5 25 - 35 25,1 - 27 12 50 55 4276441 10M 40 x 1,5 31 - 35 27,1 - 29 12 50 55 4276442 10M 63 x 1,5 31 - 35 29,1 - 31 15 64 63 4276463 10M 63 x 1,5 35 - 45 31,1 - 33 15 64 63 4276464 10M 63 x 1,5 35 - 45 33,1 - 35 15 64 63 4276465 10M 63 x 1,5 35 - 45 35,1 - 37 15 64 63 4276466 10M 63 x 1,5 35 - 45 37,1 - 39 15 64 63 4276467 10M 63 x 1,5 35 - 45 39,1 - 41 15 64 63 4276468 10

Passende Gegenmuttern Seite 144

metrisches Gewinde / metric thread

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Seal: Perbunan N• 4: Seal for outer thread: NitrilCharacteristics:• metric thread

Suitable lock nuts page 144

116

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 119: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

EMC-Cable glandSIB 800nickel-plated brass

Material:• 1/3: Gland element/Cap nut:

nickel-plated brass• 2: Flat Packing: Neoprene• 4: O-Ring: NitrilCharacteristics:• PG/metric thread• Gland element with inner socket

Aussengewinde Type Klemmbereich Klemmbereich SW E L Art.-Nr. VEfür Kabel für Beflechtung mm mm mm Stck.mm mm

Outer thread Type Clamping range Clamping range SW E L Art. no. PUfor cable for screening mm mm mm pcs.mm mm

EMV-KabelverschraubungSIB 800Messing vernickelt

Material:• 1/3: Verschraubungskörper/

Hutmutter: Messing vernickelt• 2: Flachdichtung: Neopren• 4: O-Ring: NitrilKennzeichen:• PG/metrisches Gewinde• Verschraubungskörper mit

Innentülle

MS100°

–-25°

PG / PGPG 7 807 10 - 11 6,3 - 7,3 19 8 22 2706075 50PG 9 809 11 - 12,5 7,3 - 9,3 22 9 23,5 2706091 50PG 11 811 12,5 - 16 9,3 - 11,8 24 9 23,5 2706113 50PG 13,5 813 15 - 18 11,8 - 14,3 30 9 26 2706130 50PG 16 816 18 - 20,5 14,3 - 16,8 32 9 26,5 2706164 50PG 21 821 20,5 - 23 16,8 - 19,3 34 9 27 2706210 25PG 21 821 A 23 - 25 19,3 - 21,3 36 9 27 2706229 25PG 29 829 25 - 28 21,3 - 23,9 41 9 27,5 2706296 25

metrisch / metricM 12 x 1,5 807 A/M12 6 - 7 2,5 - 3,5 19 8 22 2706012 50M 16 x 1,5/7 807/M16 10 - 11 6,3 - 7,3 19 8 22 2706016 50M 16 x 1,5/9 809/M16 11 - 12,5 7,3 - 9,3 22 9 23,5 2706017 50M 20 x 1,5/11 811/M20 12,5 - 16 9,3 - 11,8 24 9 23,5 2706020 50M 20 x 1,5/13 813/M20 15 - 18 11,8 - 14,3 30 9 26 2706039 50M 25 x 1,5/16 816/M25 18 - 20,5 14,3 - 16,8 32 9 26,5 2706025 25M 25 x 1,5/21 821/M25 20,5 - 23 16,8 - 19,3 34 9 27 2706026 25M 32 x 1,5 821 A/M32 23 - 25 19,3 - 21,3 36 9 27 2706032 25M 40 x 1,5 829/M40 25 - 28 21,3 - 23,9 41 9 27,5 2706040 25M 50 x 1,5 836/M50 35 - 38 31 - 33,7 55 10 33,5 2706050 10

Passende Erdungslaschen Seite 118Passende Gegenmuttern Seite 114

Suitable grounding plates page 118Suitable lock nuts page 114

IP 67

117

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 120: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Grounding Strip

Material:brassCharacteristics:• Connections solderable/stuckableFeatures:• Grounding strip is placed on the

connecting thread and fixed by lock nut

Anschlussgewinde Anschlussgewinde Anschlussgewinde Aussen- Innen- Art.-Nr. VEPG metrisch Gas Durchmesser Durchmesser Stck.

mm mmConnecting thread Connecting thread Connecting thread External Internal Art. no. PUPG metric Gas Diameter Diameter pcs.

mm mm

Erdungslasche

Material:Messing blankKennzeichen:• Anschlüsse löt- oder steckbarEigenschaften:• Montage durch Aufstecken auf

Anschlussgewinde und Fixierungdurch Gegenmutter

MS

PG 7 M 12 1/4" 24 13 8101078 lose/ loosePG 9 24 16 8101094 lose/ loose

M 16 3/8" 24 16,5 8101516 lose/ loosePG 11 28 19 8101116 lose/ loose

M 20 28 20,5 8101520 lose/ loosePG 13 1/2" 28 21 8101132 lose/ loosePG 16 5/8" 32 23 8101167 lose/ loose

M 25 32 25,5 8101525 lose/ loosePG 21 3/4" 37 29 8101213 lose/ loose

M 32 1" 40 33 8101532 lose/ loosePG 29 1 1/8" 52 38 8101299 lose/ loose

M 40 52 40,5 8101540 lose/ loosePG 36 1 1/2" 62 48 8101361 lose/ loose

M 50 62 50,5 8101550 lose/ loosePG 42 1 3/4" 71 55 8101421 lose/ loosePG 48 2" 78 61 8101485 lose/ loose

M 63 78 63,5 8101563 lose/ loose

118

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 121: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Type Klemmbereich E SW 1 SW 2 L Art.-Nr. VEmm mm mm mm mm Stck.

Outer thread Type Clamping range E SW 1 SW 2 L Art. no. PUmm mm mm mm mm pcs.

KabelverschraubungWADI-AMessing vernickeltPG-Gewinde

Material:• Verschraubungskörper:• Messing vernickelt• Dichtung: Elastomer• Dichtring für Aussengewinde: NitrilKennzeichen:• PG-Gewinde

MS

PG 7 507/3 2-3 6 14 14 22 4200055 100PG 7 507/7 4-7 6 14 14 22 4200056 50PG 7 507 4-6,5 6 14 14 22 4200071 100PG 9 509/7 5-7 6,5 17 17 24 4200101 50PG 9 509/10 7-10 6,5 17 17 24 4200102 50PG 9 509/8 6-8 6,5 17 17 24 4200080 50PG 9 509 7-10 6,5 17 17 24 4200098 50PG 11 511/7 5-7 6 17 20 20 4200128 50PG 11 511/10 6,5-10,5 6,5 24 24 20 4200143 50PG 11 511/8 6-8 6 17 20 20 4200500 50PG 11 511 7-10 6 17 20 20 4200110 50PG 11 511/12*) 5-12 6 20 20 20 4200144 50PG 11 511/15*) 7-15 6,5 24 24 20 4200152 50PG 13,5 513/10 6,5-10,5 6,5 24 24 28 4200178 50PG 13,5 513/12 8-12 6,5 24 24 28 4200179 50PG 13,5 513*) 7-15 6,5 24 24 28 4200136 50PG 13,5 513/15 10-15 6,5 24 24 28 4200537 100PG 16 516/10 6,5-10,5 6,5 24 24 28 4200186 50PG 16 516/12 8-12 6,5 24 24 28 4200187 25PG 16 516*) 7-15 6,5 24 24 28 4200160 25PG 21 521*) 12-20,5 7,5 32 32 32 4200217 25PG 21 521/21 16-20,5 7,5 32 32 32 4200195 25PG 21 521/22 17-21,5 7,5 32 32 32 4200196 20PG 29 529*) 16-26 8 38 38 38 4200292 10PG 36 536 24-35 9 50 50 37 4200365 10PG 42 542 35-45 10 58 58 41 4200420 5PG 48 548 38-49 11 64 64 44 4200489 5

Eigenschaften:• wasser-, gasdicht• zug-, schub- und druckfest• Dichteinsätze beständig gegen:

Öl, Alterung, Meerwasser

IP 68

Cable glandWADI-Anickel-plated brassPG-thread

Material:• Gland element: nickel-plated brass• Seal: Elastomeric• Sealing for outer thread: NitrilCharacteristics:• PG thread

Features:• gas and water-tight• pull, tensile and compression

strength• seal resistant against:

oil, ageing, sea water

119

120°–

-25°

PG-Gewinde / PG-thread

*) Dichtung 2-teilig / two-part-sealingPassende Gegenmuttern Seite 143 Suitable lock nuts page 143

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 122: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Type Klemmbereich E SW 1 SW 2 L Art.-Nr. VEmm mm mm mm mm Stck.

Outer thread Type Clamping range E SW 1 SW 2 L Art. no. PUmm mm mm mm mm pcs.

KabelverschraubungWADI-AMessing vernickeltmetrisches Gewinde, kurz

Material:• Verschraubungskörper:• Messing vernickelt• Dichtung: Elastomer• Dichtring für Aussengewinde: NitrilKennzeichen:• metrisches Gewinde• kurzes Gewinde

MS

M 12 x 1,5 M1203 2-3 7 14 14 23 4200750 50M 12 x 1,5 M1200 4-6,5 7 14 14 23 4200751 50M 12 x 1,5 M1207 4-7 7 14 14 23 4200752 50M 16 x 1,5 M1607 5-7 7 17 17 25 4200760 50M 16 x 1,5 M1608 6-8 7 17 17 25 4200761 50M 16 x 1,5 M1600 7-10 7 17 17 25 4200762 50M 16 x 1,5 M1610 7-10 7 17 17 25 4200763 50M 16 x 1,5 M1612*) 5-12 7 20 20 25 4200764 50M 20 x 1,5 M2010 6,5-10,5 7 24 24 29 4200770 50M 20 x 1,5 M2015 10-15 7 24 24 29 4200771 50M 20 x 1,5 M2000*) 7-15 7 24 24 29 4200772 50M 25 x 1,5 M2510 6,5-10,5 8 24 27 29 4200773 20M 25 x 1,5 M2500*) 7-15 8 24 27 29 4200780 20M 25 x 1,5 M2521*) 12-20,5 8 32 32 33 4200781 20M 25 x 1,5 M2520 16-20,5 8 32 32 33 4200782 20M 32 x 1,5 M3232*) 16-26 8,5 38 38 39 4200790 20M 40 x 1,5 M4040*) 24-35 8,5 50 50 36 4200794 20M 50 x 1,5 M5050*) 35-45 9,5 58 58 40 4200795 10M 63 x 1,5 M6363*) 38-49 10,5 64 64 43 4200796 5

Eigenschaften:• wasser-, gasdicht• zug-, schub- und druckfest• Dichtungseinsätze beständig gegen:

Öl, Alterung, Meerwasser

IP 68

Cable glandWADI-Anickel-plated brassmetric thread, short

Material:• Gland element: nickel-plated brass• Seal: Elastomeric• Sealing for outer thread: NitrilCharacteristics:• metric thread• short thread

Features:• gas and water-tight• shearing, tensile and compression

strength• sealing resistant against:

oil, aging, sea water

120

120°–

-25°

Metrisches Gewinde, kurz / metric thread, short

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

*) Dichtung 2-teilig / two-part-sealingPassende Gegenmuttern Seite 143 Suitable lock nuts page 143

Page 123: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Type Klemmbereich E SW 1 SW 2 L Art.-Nr. VEmm mm mm mm mm Stck.

Outer thread Type Clamping range E SW 1 SW 2 L Art. no. PUmm mm mm mm mm pcs.

KabelverschraubungWADI-AMessing vernickeltmetrisches Gewinde, lang

Material:• Verschraubungskörper:• Messing vernickelt• Dichtung: Elastomer• Dichtring für Aussengewinde: NitrilKennzeichen:• metrisches Gewinde• langes Gewinde

MS

M 12 x 1,5 MLG1203 2-3 13 14 14 29 4200800 50M 12 x 1,5 MLG1200 4-6,5 13 14 14 29 4200801 50M 12 x 1,5 MLG1207 4-7 13 14 14 29 4200802 50M 16 x 1,5 MLG1607 5-7 13 17 17 31 4200810 50M 16 x 1,5 MLG1608 6-8 13 17 17 31 4200811 50M 16 x 1,5 MLG1600 7-10 13 17 17 31 4200812 50M 16 x 1,5 MLG1610 7-10 13 17 17 31 4200813 50M 16 x 1,5 MLG1612*) 5-12 13 20 20 31 4200814 50M 20 x 1,5 MLG2010 6,5-10,5 14 24 24 35 4200820 50M 20 x 1,5 MLG2015 10-15 14 24 24 35 4200821 50M 20 x 1,5 MLG2000*) 7-15 14 24 24 35 4200822 50M 25 x 1,5 MLG2510 6,5-10,5 14 24 27 35 4200830 20M 25 x 1,5 MLG2500*) 7-15 14 24 27 35 4200831 20M 25 x 1,5 MLG2521*) 12-20,5 14 32 32 39 4200832 20M 25 x 1,5 MLG2520 16-20,5 14 32 32 39 4200833 20M 32 x 1,5 MLG3232*) 16-26 15 38 38 45 4200835 20M 40 x 1,5 MLG4040*) 24-35 15 50 50 42 4200836 20M 50 x 1,5 MLG5050*) 35-45 16 58 58 46 4200837 10M 63 x 1,5 MLG6363*) 38-49 16 64 64 49 4200840 5

Eigenschaften:• wasser-, gasdicht• zug-, schub- und druckfest• Dichtungseinsätze beständig gegen:

Öl, Alterung, Meerwasser

IP 68

Cable glandWADI-Anickel-plated brassmetric thread, long

Material:• Gland element: nickel-plated brass• Seal: Elastomeric• Sealing for outer thread: NitrilCharacteristics:• metric thread• long thread

Features:• gas and water-tight• pull, tensile and compression

strength• seal resistant against:

oil, ageing, sea water

121

120°–

-25°

Metrisches Gewinde, lang / metric thread, long

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

*) Dichtung 2-teilig / two-part-sealingPassende Gegenmuttern Seite 143 Suitable lock nuts page 143

Page 124: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Applications:• To mount armoured leads

according to VDE

Aussengewinde Type Klemmbereich SW 1/2 SW 3 Art.-Nr. VEZugentlastung mm mm Stck.mm

Outer thread Type Clamping range SW 1/2 SW 3 Art. no. PUtraction relief mm mm pcs.mm

PG / PGPG 7 ZEV 607 4 - 9 17 14 4300009 100PG 9 ZEV 609 4 - 9 17 17 4300017 50PG 11 ZEV 710 7 - 11 20 20 4300025 50PG 13,5 ZEV 1014 10 - 13 22 22 4300033 50PG 16 ZEV 1015 10 - 15 24 24 4300041 50PG 21 ZEV 1418 13 - 20 30 30 4300050 50PG 29 ZEV 2027 20 - 29 40 40 4300068 10

metrisch / metricM 16 x 1,5 ZEV M 16/9 4 - 9 17 18 4300116 50M 20 x 1,5/11 ZEV M 20/11 7 - 11 20 22 4300120 50M 20 x 1,5/13,5 ZEV M 20/13,5 10 - 13 22 22 4300121 50M 25 x 1,5/16 ZEV M 25/16 10 - 15 24 27 4300125 50M 25 x 1,5/21 ZEV M 25/21 13 - 20 30 32 4300126 50M 32 x 1,5/21 ZEV M 32/21 13 - 20 30 34 4300132 50M 32 x 1,5/29 ZEV M 32/29 20 - 29 40 40 4300133 10

KabelverschraubungTyp ZEVMessing vernickeltmit Zugentlastung

Material:• Verschraubungskörper:

Messing vernickelt• Dichtring: NeoprenKennzeichen:• PG/metrisches Gewinde• Dichtring zum Ausschneiden

Cable glandType ZEVnickel-plated brasswith traction relief

Anwendungsbereiche:• Montage von armierten Leitungen

nach VDE

MS IP 65

Passende Gegenmuttern Seite 143

Material:• Gland element: nickel-plated brass• Seal: NeopreneCharacteristics:• PG/metric thread• Sealing ring, punchable

Suitable lock nuts page 143

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

122

Page 125: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Type Klemmbereich Klemmbereich SW 1 SW 2 Art.-Nr. VEDichtung Zugentlastung mm mm Stck.mm mm

Outer thread Type Clamping range Clamping range SW 1 SW 2 Art. no. PUSeal traction relief mm mm pcs.mm mm

KabelverschraubungTyp ZEVBMessing vernickeltmit Zugentlastungund Biegeschutz

Material:• Verschraubungskörper:

Messing vernickelt• Dichtung: NeoprenKennzeichen:• PG/metrisches Gewinde• Dichtring zum Ausschneiden

Cable glandType ZEVBnickel-plated brasswith traction reliefand kink protection

Eigenschaften:• zugfeste Halterung• Erdverbindung möglich• Schutz des Kabels bei starkem

„Verbiegen“

MS IP 65

PG / PGPG 9 ZEVB 9 2 - 9 6 - 9,5 17 22 4308093 50PG 11 ZEVB 11 4 - 11 8 - 11,5 20 24 4308115 50PG 13,5 ZEVB 13 4,5 - 12 9 - 13 22 28 4308131 50PG 16 ZEVB 16 5,5 - 14,5 10 - 15 24 30 4308166 25PG 21 ZEVB 21 8 - 19 14 - 20 30 38 4308212 25PG 29 ZEVB 29 12 - 27 19 - 30 40 50 4308298 10

metrisch / metricM 16 x 1,5 ZEVB M 16/9 2 - 9 6 - 9,5 18 22 4308516 100M 20 x 1,5 ZEVB M 20/11 4 - 11 8 - 11,5 22 24 4308520 100M 20 x 1,5 ZEVB M 20/13 4,5 - 12 9 - 13 22 28 4308521 100M 25 x 1,5 ZEVB M 25/16 5,5 - 14,5 10 - 15 27 30 4308525 50M 25 x 1,5 ZEVB M 25/21 8 - 18 14 - 20 32 38 4308526 25M 32 x 1,5 ZEVB M 32/21 8 - 19 14 - 20 34 38 4308532 25M 32 x 1,5 ZEVB M 32/29 12 - 27 19 - 30 40 50 4308533 25

Passende Gegenmuttern Seite 143

Applications:• tension proof grip• grounding connection possible• protects strongly bent cables

Material:• Gland element: nickel-plated brass• Seal: NeopreneCharacteristics:• PG/metric thread• Sealing ring, punchable

Suitable lock nuts page 143

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

123

Page 126: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Type Klemmbereich Klemmbereich SW 1 SW 2 Art.-Nr. VEDichtung Zugentlastung mm mm Stck.mm mm

Outer thread Type Clamping range Clamping range SW 1 SW 2 Art. no. PUseal traction relief mm mm pcs.mm mm

Material:• Verschraubungskörper:

Messing vernickelt• Dichtung: NeoprenKennzeichen:• PG/metrisches Gewinde

Cable glandType ZAnickel-plated brasswith centred traction reliefand kink protection

Eigenschaften:• zentrisch wirkende Zugentlastung• kein Verziehen der Leitung beim

Klemmen• zugfeste Halterung• Erdverbindung möglich

MS IP 65

PG / PGPG 7 ZA 7 4 - 6 5,5 - 7,5 16 14 4305078 100Pg 9 ZA 9 2 - 9 6,5 - 9,5 19 17 4305094 50PG 11 ZA 11 4 - 11 7,5 - 11,5 22 20 4305116 50PG 13 ZA 13 4,5 - 12 8,5 - 13,5 24 22 4305132 50PG 16 ZA 16 5,5 - 14,5 10,5 - 16,5 27 24 4305167 25PG 21 ZA 21 8 - 19 12 - 20,5 33 30 4305213 25PG 29 ZA 29 12 - 27 19 - 29,5 42 40 4305299 10PG 36 ZA 36 22 - 33 24 - 36,5 52 50 4305361 10PG 42 ZA 42 25 - 40 33 - 42,5 60 57 4305426 5PG 48 ZA 48 30 - 45 36 - 47,5 64 64 4305485 5

metrisch / metricM 12 x 1,5 ZA/M 12 4 - 6 5,5 - 7,5 16 14 4305500 50M 16 x 1,5 ZA/M 16/02 2 - 9 6,6 - 9,5 19 18 4305501 50M 16 x 1,5 ZA/M 16/04 4 - 11 7,5 - 11,5 22 20 4305502 50M 16 x 1,5 ZA/M 16/4,5 4,5 - 12 8,5 - 13,5 24 22 4305503 50M 20 x 1,5 ZA/M 20/04 4 - 11 7,5 - 11,5 22 22 4305504 50M 20 x 1,5 ZA/M 20/4,5 4,5 - 12 8,5 - 13,5 24 22 4305505 50M 20 x 1,5 ZA/M 20/5,5 5,5 - 14,5 10,5 - 16,5 27 24 4305506 50M 25 x 1,5 ZA/M 25 5,5 - 14,5 10,5 - 16,5 27 27 4305507 20M 32 x 1,5 ZA/M 32/08 8 - 19 12 - 20,5 33 34 4305508 20M 32 x 1,5 ZA/M 32/12 12 - 27 19 - 29,5 42 40 4305509 20M 40 x 1,5 ZA/M 40 12 - 27 19 - 29,5 42 42 4305510 20M 50 x 1,5 ZA/M 50/22 22 - 33 24 - 36,5 52 52 4305511 10M 50 x 1,5 ZA/M 50/25 25 - 40 33 - 42,5 60 58 4305512 10M 63 x 1,5 ZA/M 63/25 25 - 40 33 - 42,6 60 65 4305513 5M 63 x 1,5 ZA/M 63/30 30 - 45 36 - 47,5 64 65 4305514 5M 75 x 1,5 ZA/M 75 30 - 45 36 - 47,5 64 80 4305515 1

Passende Gegenmuttern Seite 143

KabelverschraubungTyp ZAMessing vernickeltmit zentrisch wirkender Zugentlastungund Biegeschutz

Applications:• centred traction relief• no twisted cable with while clamping• tension proof grip• grounding connection possible

Material:• Gland element: nickel-plated brass• Seal: NeopreneCharacteristics:• PG/metric thread

Suitable lock nuts page 143

124

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 127: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Passende Gegenmutter Seite 143

Aussen- Type Klemm- Ø P SW 1 SW 2 E L Art.-Nr. VEgewinde bereich mm mm mm mm mm Stck.

mmOuter thread Type Clamping Ø P SW 1 SW 2 E L Art. no. PU

range mm mm mm mm mm pcs.mm

Kabelverschraubungmit Zugentlastungund KnickschutztülleMessing vernickelt

Material:• Verschraubungskörper:• Messing vernickelt• Knickschutztülle: Neopren• Dichtung für Aussengewinde: NitrilKennzeichen:• PG-Gewinde• mit Zugentlastungsklemme

MS

PG 7 SR 7005 3,5-5 5 14 17 5 49 4309014 100PG 9 SR 9007 5,5-7 7 17 17 6 52 4309022 100PG 11 SR 1107 5,5-7 7 20 20 6 53,5 4309030 100PG 11 SR 1109 7,5-9 9 20 20 6 53,5 4309049 50PG 13,5 SR 1309 7,5-9 9 22 22 6,5 60 4309057 50PG 13,5 SR 1311 9-11 11 22 22 6,5 60 4309065 50PG 13,5 SR 1313 10-12 13 22 22 6,5 60 4309073 50PG 16 SR 1613 11-12 13 24 24 6,5 64 4309081 50PG 16 SR 1615 12-13,5 15 24 24 6,5 64 4309090 50PG 21 SR 2115 13-14 15 30 30 7 77 4309103 25PG 21 SR 2117 15-16 17 30 30 7 77 4309111 25PG 21 SR 2119 17-18 19 30 30 7 77 4309120 25PG 21 SR 2120 17-19 20 30 30 7 77 4309138 25PG 29 SR 2920 17,5-20 20 40 40 8 82 4309146 25PG 29 SR 2923 20-23 23 40 40 8 82 4309154 25PG 29 SR 2925 22-25 25 40 40 8 82 4309162 25PG 36 SR 3626 23,5-26 26 50 50 9 110 4309170 10PG 36 SR 3630 27-30 30 50 50 9 110 4309189 5PG 36 SR 3633 30-33 33 50 50 9 110 4309197 10PG 36 SR 3635 31-35 35 50 50 9 110 4309200 10PG 42 SR 4235 32-35 35 57 57 10 112 4309219 10PG 42 SR 4238 34-38 38 57 57 10 112 4309227 10PG 42 SR 4240 36-40 40 57 57 10 112 4309235 10PG 48 SR 4840 36-40 40 64 64 10 118 4309243 10PG 48 SR 4844 39-40 44 64 64 10 118 4309251 10

Eigenschaften:• Schutz vor Abknicken und Heraus-

reißen von Kabeln• wasserdicht

IP 65

Cable glandwith traction reliefand kink protectionsocketnickel-plated brass

Material:• Gland element: nickel-plated brass• Kink protection socket: Neoprene• Seal for outer thread: NitrilCharacteristics:• PG thread• with traction relief clamp

Features:• protection against kinking

and tearing out of cables• watertight

125

100°–

-25°

Suitable lock nuts page 143

PG-Gewinde / PG thread

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 128: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Passende Gegenmutter Seite 143

Aussen- Type Klemm- Ø P SW 1 SW 2 E L Art.-Nr. VEgewinde bereich mm mm mm mm mm Stck.

mmOuter thread Type Clamping Ø P SW 1 SW 2 E L Art. no. PU

range mm mm mm mm mm pcs.mm

Kabelverschraubungmit Zugentlastungund KnickschutztülleMessing vernickelt

Material:• Verschraubungskörper:• Messing vernickelt• Knickschutztülle: Neopren• Dichtung für Aussengewinde: NitrilKennzeichen:• metrisches Gewinde• mit Zugentlastungsklemme

MS

M 12 x 1,5 SRM 1205 3,5-5 5 14 17 7 51 4309300 100M 16 x 1,5 SRM 1607 5,5-7 7 17 17 7 53 4309305 100M 20 x 1,5 SRM 2007 5,5-7 7 22 20 7 54,5 4309310 100M 20 x 1,5 SRM 2009 7,5-9 9 22 20 7 54,5 4309311 50M 20 x 1,5 SRM 2011 9-11 11 22 22 7 61 4309312 50M 20 x 1,5 SRM 2013 10-12 13 22 22 7 61 4309313 50M 25 x 1,5 SRM 2513 11-12 13 26 24 8 65,5 4309315 50M 25 x 1,5 SRM 2515 12-13,5 15 26 24 8 65,5 4309316 50M 32 x 1,5 SRM 3215 13-14 15 34 30 8,5 78,5 4309320 25M 32 x 1,5 SRM 3217 15-16 17 34 30 8,5 78,5 4309321 25M 32 x 1,5 SRM 3219 17-18 19 34 30 8,5 78,5 4309322 25M 32 x 1,5 SRM 3220 17-19 20 34 30 8,5 78,5 4309323 25M 40 x 1,5 SRM 4020 17,5-20 20 42 40 8,5 82 4309325 25M 40 x 1,5 SRM 4023 20-23 23 42 40 8,5 82 4309326 25M 40 x 1,5 SRM 4025 22-25 25 42 40 8,5 82 4309327 25M 50 x 1,5 SRM 5026 23,5-26 26 52 50 9,5 110 4309330 10M 50 x 1,5 SRM 5030 27-30 30 52 50 9,5 110 4309331 10M 50 x 1,5 SRM 5033 30-33 33 52 50 9,5 110 4309332 10M 50 x 1,5 SRM 5035 31-35 35 52 50 9,5 110 4309333 10M 63 x 1,5 SRM 6335 32-35 35 64 57 10,5 112 4309335 5M 63 x 1,5 SRM 6338 34-38 38 64 57 10,5 112 4309336 5M 63 x 1,5 SRM 6340 36-40 40 64 57 10,5 112 4309337 5

Eigenschaften:• Schutz vor Abknicken und Heraus-

reißen von Kabeln• wasserdicht

IP 65

Cable glandwith traction reliefand kink protectionsocketnickel-plated brass

Material:• Gland element: nickel-plated brass• Kink protection socket: Neoprene• Seal for outer thread: NitrilCharacteristics:• metric thread• with traction relief clamp

Features:• protection against kinking

and tearing out of cables• watertight

126

100°–

-25°

Suitable lock nuts page 143

Metrisches Gewinde / metric thread

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 129: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type Klemm- E SW H Art.-Nr. Art.-Nr. VEgewinde bereich mm mm mm silbergrau tiefschwarz Stck.

mm RAL 7001 RAL 9005Outer thread Type Clamping E SW H Art. no. Art. no. PU

range mm mm mm silver grey jet black pcs.mm RAL 7001 RAL 9005

Kabelverschraubungmit Zugentlastungund KnickschutzSyntec/KS

Material:• Verschraubungskörper: Polyamid 6• Dichtung: NeoprenKennzeichen:• PG/metrisches/NPT-Gewinde• kurzes/langes Gewinde

Cable glandwith traction reliefand kink protectionSyntec/KS

Eigenschaften:• optimale Zugentlastung durch

Klemmlamellen• Abdichtung zum Gehäuse durch

Dichtungslippe• Trapezgewinde für hohes Anzugs-

moment garantiert festen unddauerhaften Sitz der Hutmutter

• lieferbar auch mit Reduziereinsatz• gas- und wasserdichtAnwendungsbereiche:• Maschinen-, Gerätebau

PA 6100°

–-20°

IP 68

Passende Gegenmuttern Seite 140

PG / PGPG 7 Syntec/KS 2,5 - 6,5 8 15 54 5306007 5306107 50PG 9 Syntec/KS 3 - 8 8 19 64 5306009 5306109 50PG 11/1 Syntec/KS 4 - 10 8 22 77 5306011 5306111 50PG 11/2 Syntec/KS 2 - 7 8 22 77 5306012 5306112 50PG 13/1 Syntec/KS 5,5 - 12 9 24 88 5306013 5306113 50PG 13/2 Syntec/KS 3 - 7 9 24 88 5306014 5306114 50PG 16/1 Syntec/KS 8,5 - 14 10 27 102 5306016 5306116 25PG 16/2 Syntec/KS 5 - 11 10 27 102 5306017 5306117 25

metrisch, kurzes Gewinde / metric, short threadM 12 x 1,5/K/6,5 Syntec/KS 2,5 - 6,5 6 15 54 5306030 5306130 50M 16 x 1,5/K/8 Syntec/KS 4 - 8 6 19 64 5306031 5306131 50M 20 x 1,5/K/7 Syntec/KS 3 - 7 8 24 88 5306032 5306132 50M 20 x 1,5/K/12 Syntec/KS 5,5 - 12 8 24 88 5306033 5306133 50

metrisch, langes Gewinde / metric, long threadM 12 x 1,5/L/6,5 Syntec/KS 2,5 - 6,5 12 15 54 5306040 5306140 50M 16 x 1,5/L/8 Syntec/KS 4 - 8 12 19 64 5306041 5306141 50M 20 x 1,5/L/7 Syntec/KS 3 - 7 13 24 88 5306042 5306142 50M 20 x 1,5/L/12 Syntec/KS 5,5 - 12 13 24 88 5306043 5306143 50

NPT / NPTNPT 3/8"/8 Syntec/KS 3 - 8 15 19/22 64 5306050 5306150 50NPT 1/2"/7 Syntec/KS 3 - 7 15 24 88 5306051 5306151 50NPT 1/2"/12 Syntec/KS 5,5 - 12 15 24 88 5306052 5306152 50

Features:• optimal strain relief through

clamping lamellas• seals against housing through

sealing lip• trapezoidal threading for a high

tightening torque guarantees thatthe cap nut has a tight and permanent fit

• also available with reduction insert• gas and water tightApplications:• Machines and devices

Material:• gland element: Polyamide 6• Seal: NeopreneCharacteristics:• PG/metric thread/NPT• short/long thread

Suitable lock nuts page 140

127

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 130: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Type für Kabel Art.-Nr. VEØ mm lichtgrau Stck.

RAL 7035Outer thread Type for cable Art. no. PU

Ø mm light grey pcs.RAL 7035

Material:• Verschraubungskörper: Polystyrol• Dichtung: NeoprenKennzeichen:• Ausführung mit 6-kant-Ansatz• PG-Gewinde

Cable glandaccording to DIN 46320Polystyrene

Material:• Gland element: Polystyrene• Seal: NeopreneCharacteristics:• with hexagon base• PG-thread

PS IP 65

kurzes Gewinde / short threadPG 7 307PG 3,5 - 6 5202078 50PG 9 309PG 4,5 - 7 5202094 50PG 11 311PG 6 - 9 5202116 50PG 13,5 313PG 9 - 12 5202132 50PG 16 316PG 11 - 14 5202167 50PG 21 321PG 14 - 18 5202213 25PG 29 329PG 18 - 25 5202299 25PG 36 336PG 25 - 32 5202361 10PG 42 342PG 30 - 38 5202434 10PG 48 348PG 36 - 44 5202485 10

langes Gewinde / long threadPG 9 309PGL 4,5 - 7 5202590 50PG 11 311PGL 6 - 9 5202604 50PG 13,5 313PGL 9 - 12 5202507 50PG 16 316PGL 11 - 14 5202515 50PG 21 321PGL 14 - 18 5202612 25PG 29 329PGL 18 - 25 5202620 10PG 36 336PGL 25 - 32 5202418 10PG 42 342PGL 30 - 38 5202426 10

Passende Gegenmuttern Seite 142

Kabelverschraubungnach DIN 46320Polystyrol

70°–

-20°

PG-Gewinde / PG-thread

Suitable lock nuts page 142

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

128

Page 131: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Type für Kabel Art.-Nr. VEØ mm lichtgrau Stck.

RAL 7035Outer thread Type for cable Art. no. PU

Ø mm light grey pcs.RAL 7035

Material:• Verschraubungskörper: Polyamid• Dichtung: NeoprenKennzeichen:• Ausführung mit 6-kant-Ansatz• metrisches Gewinde

Cable glandaccording to DIN 46320Polyamide

Material:• Gland element: Polyamide• Seal: NeopreneCharacteristics:• with hexagon base• metric thread

PA IP 54

M 12 x 1,5 1250M1209 5 - 8 5203012 50M 16 x 1,5 1250M1609 7 - 9 5203016 50M 20 x 1,5 1250M2011 7 - 9 5203020 50M 20 x 1,5 1250M2013 8 - 12 5203021 50M 25 x 1,5 1250M2516 11 - 14 5203025 50M 25 x 1,5 1250M2521 13 - 17 5203026 50M 32 x 1,5 1250M3221 14 - 18 5203032 50M 32 x 1,5 1250M3229 18 - 25 5203033 10M 40 x 1,5 1250M4029 23 - 27 5203040 10M 50 x 1,5 1250M5036 25 - 33 5203050 10M 50 x 1,5 1250M5042 32 - 40 5203051 5M 63 x 1,5 1250M6348 38 - 44 5203063 5

Passende Gegenmuttern Seite 140

Kabelverschraubungnach DIN 46320Polyamid

70°–

-20°

Metrisches Gewinde / metric thread

Suitable lock nuts page 140

129

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 132: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde für Kabel E Art.-Nr. VEØ mm mm Stck.

Outer thread for cable E Art. no. PUØ mm mm pcs.

Material:• Verschraubungskörper:

Messing vernickelt• Dichtung: NeoprenKennzeichen:• einfacher Dichtring• PG-Gewinde

Cable glandacc. to DIN 46320with round intermediate partnickel-plated brassPG-thread

Material:• Gland element: nickel-plated brass• Seal: NeopreneCharacteristics:• simple seal• PG-thread

MS IP 65

kurzes Gewinde / short threadPG 7 5 - 7 5 4000005 100PG 9 6 - 8 6 4000102 50PG 11 8 - 10 6 4000200 50PG 13,5 10 - 12 6,5 4000307 50PG 16 12 - 14 6,5 4000404 25PG 21 15 - 17 7 4000501 25PG 29 24 - 26 8 4000552 10PG 36 32 - 34 9 4000609 10PG 42 39 - 41 10 4000650 5PG 48 44 - 46 10 4000706 5

langes Gewinde / long threadPG 7 5 - 7 15 4002008 100PG 9 6 - 8 15 4002105 50PG 11 8 - 10 15 4002202 50PG 13,5 10 - 12 15 4002300 50PG 16 12 - 14 15 4002407 25PG 21 15 - 17 15 4002504 25PG 29 24 - 26 15 4002555 10PG 36 32 - 34 15 4002601 10PG 42 39 - 41 15 4002709 5PG 48 44 - 46 15 4002652 5

Passende Gegenmuttern Seite 143 Suitable lock nuts page 143

Kabelverschraubungnach DIN 46320mit rundem ZwischenstutzenMessing vernickeltPG-Gewinde

PG-Gewinde / PG-thread

130

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 133: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde E für Kabel Abstufung d. Art.-Nr. VEmm Ø mm Dichtringes Stck.

mmOuter thread E for cable graded dimensions Art. no. PU

mm Ø mm for sealing ring pcs.mm

Material:• Verschraubungskörper:

Messing vernickelt• Dichtung: NeoprenKennzeichen:• ausschneidbarer Dichtring• PG-Gewinde

Cable glandacc. to DIN 46320with round intermediate partnickel-plated brassPG-thread

Material:• Gland element: nickel-plated brass• Seal: NeopreneCharacteristics:• punchable seal• PG-thread

MS IP 65

kurzes Gewinde / short threadPG 9 6 2 - 9 5 - 7,5 - 10 4006100 50PG 11 6 4 - 11 5 - 7,5 - 10 4006208 50PG 13,5 6,5 4,5 - 12 7,5 - 10 - 12,5 4006305 50PG 16 6,5 5,5 - 14,5 7,5 - 10 - 12 - 15 4006402 25PG 21 7 8 - 19 10 - 13 - 16 - 19 4006500 25PG 29 8 12 - 27 18 - 21 - 24 - 27 4006550 10PG 36 9 22 - 33 24 - 27 - 30 - 33 4006607 10PG 42 10 25 - 40 30 - 33 - 36 - 39 4006658 5PG 48 10 30 - 45 36 - 39 - 42 - 45 4006704 5

Passende Gegenmuttern Seite 143 Suitable lock nuts page 143

Kabelverschraubungnach DIN 46320mit rundem ZwischenstutzenMessing vernickeltPG-Gewinde

PG-Gewinde / PG-thread

131

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 134: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde für Kabel E Art.-Nr. VEØ mm mm Stck.

Outer thread for cable E Art. no. PUØ mm mm pcs.

Material:• Verschraubungskörper:

Messing vernickelt• Dichtung: NeoprenKennzeichen:• einfacher Dichtring• metrisches Gewinde

Cable glandwith round intermediate partnickel-plated brassmetric thread

MS IP 65

kurzes Gewinde / short threadM 12 x 1,5 5 - 7 7 4104312 50M 16 x 1,5 6 - 8 7 4104316 50M 20 x 1,5 8 - 10 7 4104320 50M 20 x 1,5 10 - 12 7 4104321 25M 25 x 1,5 12 - 14 8 4104325 25M 32 x 1,5 15 - 17 8,5 4104332 25M 40 x 1,5 24 - 26 8,5 4104340 10M 50 x 1,5 32 - 34 9,5 4104350 10M 63 x 1,5 39 - 41 10,5 4104363 5

langes Gewinde / long threadM 12 x 1,5 5 - 7 13 4104412 50M 16 x 1,5 6 - 8 13 4104416 50M 20 x 1,5 8 - 10 13 4104420 50M 20 x 1,5 10 - 12 13 4104421 25M 25 x 1,5 12 - 14 14 4104425 25M 32 x 1,5 15 - 17 14,5 4104432 25M 40 x 1,5 24 - 26 14,5 4104440 10M 50 x 1,5 32 - 34 15,5 4104450 10M 63 x 1,5 39 - 41 16,5 4104463 5

Passende Gegenmuttern Seite 143 Suitable lock nuts page 143

Kabelverschraubungmit rundem ZwischenstutzenMessing vernickeltmetrisches Gewinde

Metrisches Gewinde / metric thread

Material:• Gland element: nickel-plated brass• Seal: NeopreneCharacteristics:• simple seal• metric thread

132

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 135: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde für Kabel E Abstufung d. Art.-Nr. VEØ mm mm Dichtringes Stck.

mmOuter thread for cable E graded dimensions Art. no. PU

Ø mm mm for seal pcs.mm

Material:• Verschraubungskörper:

Messing vernickelt• Dichtung: NeoprenKennzeichen:• Dichtung zum Ausschneiden• metrisches Gewinde

Cable glandwith round intermediate partnickel-plated brassmetric thread

MS IP 65

kurzes Gewinde / short threadM 16 x 1,5 2 - 9 7 5 - 7,5 - 10 4104516 50M 20 x 1,5 4 - 11 7 5 - 7,5 - 10 - 12 4104520 50M 20 x 1,5 4,5 - 12 7 7,5 - 10 - 12,5 4104521 25M 25 x 1,5 5,5 - 14,5 8 7,5 - 10 - 12 - 15 4104525 25M 32 x 1,5 8 - 19 8,5 10 - 13 - 16 - 19 4104532 25M 40 x 1,5 12 - 27 8,5 18 - 21 - 24 - 27 4104540 10M 50 x 1,5 22 - 23 9,5 24 - 27 - 30 - 33 4104550 5M 63 x 1,5 25 - 40 10,5 30 - 33 - 36 - 39 4104563 5

langes Gewinde / long threadM 16 x 1,5 2 - 9 13 5 - 7,5 - 10 4104616 50M 20 x 1,5 4 - 11 13 5 - 7,5 - 10 - 12 4104620 50M 20 x 1,5 4,5 - 12 13 7,5 - 10 - 12,5 4104621 25M 25 x 1,5 5,5 - 14,5 14 7,5 - 10 - 12 - 15 4104625 25M 32 x 1,5 8 - 19 14,5 10 - 13 - 16 - 19 4104632 25M 40 x 1,5 12 - 27 14,5 18 - 21 - 24 - 27 4104640 10M 50 x 1,5 22 - 23 15,5 24 - 27 - 30 - 33 4104650 10M 63 x 1,5 25 - 40 16,5 30 - 33 - 36 - 39 4104663 5

Passende Gegenmuttern Seite 143 Suitable lock nuts page 143

Kabelverschraubungmit rundem ZwischenstutzenMessing vernickeltmetrisches Gewinde

Metrisches Gewinde / metric thread

Material:• Gland element: nickel-plated brass• Seal: NeopreneCharacteristics:• punchable seal• metric thread

133

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 136: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- für Kabel E SW 1 SW 2 Art.-Nr. VEgewinde Ø mm mm mm mm Stck.Outer thread for cable E SW 1 SW 2 Art. no. PU

Ø mm mm mm mm pcs.

Material:Verschraubungskörper:Messing vernickeltKennzeichen:• einfacher Dichtring• PG-Gewinde

Cable glandacc. to DIN 46320with hexagon intermediatepartnickel-plated brassPG-thread

MS IP 65

kurzes Gewinde / short threadPG 7 5 - 7 5 14 13 4001001 100PG 9 6 - 8 6 17 15 4001109 50PG 11 8 - 10 6 20 18 4001206 50PG 13,5 10 - 12 6,5 22 20 4001303 50PG 16 12 - 14 6,5 24 22 4001400 25PG 21 15 - 17 7 30 28 4001508 25PG 29 24 - 26 8 40 37 4001559 10PG 36 31 - 33 9 50 47 4001605 10PG 42 39 - 41 10 57 54 4001656 5PG 48 44 - 46 10 64 60 4001702 5

langes Gewinde / long threadPG 9 6 - 8 15 17 15 4003004 50PG 11 8 - 10 15 20 18 4003101 50PG 13,5 10 - 12 15 22 20 4003209 50PG 16 12 - 14 15 24 22 4003306 25PG 21 15 - 17 15 30 28 4003403 25PG 29 24 - 26 15 40 37 4003500 10PG 36 31 - 33 15 50 47 4003551 10PG 42 39 - 41 15 57 54 4003659 5PG 48 44 - 46 15 64 60 4003608 5

Passende Gegenmuttern Seite 143 Suitable lock nuts page 143

Kabelverschraubungnach DIN 46320mit 6-kant-ZwischenstutzenMessing vernickeltPG-Gewinde

PG-Gewinde / PG-thread

Material:Gland element: nickel-plated brassCharacteristics:• simple sealing ring• PG-thread

134

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 137: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- für Kabel E SW 1 SW 2 Abstufung d. Art.-Nr. VEgewinde Ø mm mm mm mm Dichtringes Stck.

mmOuter thread for cable E SW 1 SW 2 graded dimensions Art. no. PU

Ø mm mm mm mm for sealing ring pcs.mm

Material:Verschraubungskörper: Messing vernickeltKennzeichen:• Dichtung zum Ausschneiden• PG-Gewinde

Cable glandacc. to DIN 46320with hexagon intermediatepartnickel-plated brassPG-thread

MS IP 65

kurzes Gewinde / short threadPG 9 2 - 9 6 17 15 5 - 7,5 - 10 4009100 50PG 11 4 - 11 6 20 18 5 - 7,5 - 10 4009207 50PG 13,5 4,5 - 12 6,5 22 20 7,5 - 10 - 12,5 4009304 50PG 16 5,5 - 14,5 6,5 24 22 7,5 - 10 - 12 - 15 4009401 25PG 21 8 - 19 7 30 28 10 - 13 - 16 - 19 4009509 25PG 29 12 - 27 8 40 37 18 - 21 - 24 - 27 4009550 10PG 36 22 - 33 9 50 47 24 - 27 - 30 - 33 4009606 10PG 42 25 - 40 10 57 54 30 - 33 - 36 - 39 4009658 5PG 48 30 - 45 10 64 60 36 - 39 - 42 - 45 4009695 5

Passende Gegenmuttern Seite 143 Suitable lock nuts page 143

Kabelverschraubungnach DIN 46320mit 6-kant-ZwischenstutzenMessing vernickeltPG-Gewinde

PG-Gewinde / PG-thread

Material:Gland element: nickel-plated brassCharacteristics:• punchable sealing ring• PG-thread

135

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 138: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- für Kabel E SW 1 SW 2 Art.-Nr. VEgewinde Ø mm mm mm mm Stck.Outer thread for cable E SW 1 SW 2 Art. no. PU

Ø mm mm mm mm pcs.

Material:Verschraubungskörper:Messing vernickeltKennzeichen:• einfacher Dichtring• metrisches Gewinde

Cable glandwith hexagon intermediatepartnickel-plated brassmetric thread

MS IP 65

kurzes Gewinde / short threadM 12 x 1,5 5 - 7 7 14 13 4103312 50M 12 x 1,5 6 - 8 7 17 15 4103313 50M 16 x 1,5 6 - 8 7 18 15 4103316 50M 16 x 1,5 8 - 10 7 20 18 4103317 50M 20 x 1,5 8 - 10 7 22 18 4103320 50M 20 x 1,5 10 - 12 7 22 20 4103321 25M 25 x 1,5 12 - 14 8 27 22 4103325 25M 25 x 1,5 15 - 17 8 32 28 4103326 25M 32 x 1,5 15 - 17 8,5 34 28 4103332 25M 32 x 1,5 24 - 26 8,5 40 37 4103333 25M 40 x 1,5 24 - 26 8,5 42 37 4103340 10M 40 x 1,5 28 - 30 8,5 50 47 4103341 10M 50 x 1,5 31 - 33 9,5 52 47 4103350 10M 50 x 1,5 39 - 41 9,5 58 54 4103351 10M 63 x 1,5 39 - 41 10,5 65 54 4103363 5M 63 x 1,5 45 - 47 10,5 65 60 4103364 5

langes Gewinde / long threadM 12 x 1,5 5 - 7 13 14 13 4103412 50M 16 x 1,5 6 - 8 13 18 15 4103416 50M 20 x 1,5 8 - 10 13 22 18 4103420 50M 20 x 1,5 10 - 12 13 22 20 4103421 25M 25 x 1,5 12 - 14 14 27 22 4103425 25M 32 x 1,5 15 - 17 14,5 34 28 4103432 25M 40 x 1,5 24 - 26 14,5 42 37 4103440 10M 50 x 1,5 31 - 33 15,5 52 47 4103450 10M 63 x 1,5 39 - 41 16,5 65 54 4103463 5

Passende Gegenmuttern Seite 143 Suitable lock nuts page 143

Kabelverschraubungmit 6-kant-ZwischenstutzenMessing vernickeltmetrisches Gewinde

Metrisches Gewinde / metric thread

Material:Gland element: nickel-plated brassCharacteristics:• simple sealing ring• metric thread

136

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 139: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- für Kabel E SW 1 SW 2 Abstufung d. Art.-Nr. VEgewinde Ø mm mm mm mm Dichtringes Messing Stck.

mmOuter thread for cable E SW 1 SW 2 grated dimensions Art. no. PU

Ø mm mm mm mm for sealing ring brass pcs.mm

Material:Verschraubungskörper:Messing vernickeltKennzeichen:• ausschneidbarer Dichtring• metrisches Gewinde

Cable glandwith hexagon intermediatepartnickel-plated brassmetric thread

MS IP 65

kurzes Gewinde / short threadM 16 x 1,5 4 - 9,5 7 18 15 5 - 7,5 - 10 4103516 50M 20 x 1,5 4 - 11,5 7 22 18 5 - 7,5 - 10 - 12 4103520 50M 20 x 1,5 6 - 13 7 22 20 7,5 - 10 - 12,5 4103521 25M 25 x 1,5 6 - 15 8 27 22 7,5 - 10 - 12 - 15 4103525 25M 32 x 1,5 9 - 20 8,5 34 28 10 - 13 - 16 - 19 4103532 25M 40 x 1,5 15 - 27 8,5 42 37 18 - 21 - 24 - 27 4103540 10M 50 x 1,5 21 - 33 9,5 52 47 24 - 27 - 30 - 33 4103550 5M 63 x 1,5 27 - 40 10,5 65 54 30 - 33 - 36 - 39 4103563 5

langes Gewinde / long threadM 16 x 1,5 4 - 9,5 13 18 15 5 - 7,5 - 10 4103616 50M 20 x 1,5 4 - 11,5 13 22 18 5 - 7,5 - 10 - 12 4103620 50M 20 x 1,5 6 - 13 13 22 20 7,5 - 10 - 12,5 4103621 25M 25 x 1,5 6 - 15 14 27 22 7,5 - 10 - 12 - 15 4103625 25M 32 x 1,5 9 - 20 14,5 34 28 10 - 13 - 16 - 19 4103632 25M 40 x 1,5 15 - 27 14,5 42 37 18 - 21 - 24 - 27 4103640 10M 50 x 1,5 21 - 33 15,5 52 47 24 - 27 - 30 - 33 4103650 10M 63 x 1,5 27 - 40 16,5 65 54 30 - 33 - 36 - 39 4103663 5

Passende Gegenmuttern Seite 143 Suitable lock nuts page 143

Kabelverschraubungmit 6-kant-ZwischenstutzenMessing vernickeltmetrisches Gewinde

Metrisches Gewinde / metric thread

Material:Gland element: nickel-plated brassCharacteristics:• punchable sealing ring• metric thread

137

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Page 140: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde für Kabel E SW 1 SW 2 Art.-Nr. VEØ mm mm mm mm Stck.

Outer thread for cable E SW 1 SW 2 Art. no. PUØ mm mm mm mm pcs.

Kabelverschraubungmit 6-kant-ZwischenstutzenMessing vernickeltmetrisch-metrischesGewinde

Material:Verschraubungskörper:Messing vernickeltKennzeichen:• Zwischenstutzen mit metrischem

Gewinde• Druckschraube mit metrischem

Gewinde• einfacher Dichtring

M 12 x 1,5 4 - 6 5 14 12 4103812 50M 16 x 1,5 6 - 8 6 18 16 4103816 50M 16 x 1,5 8 - 10 6 18 16 4103817 50M 20 x 1,5 10 - 12 6 22 20 4103820 50M 20 x 1,5 12 - 14 6 22 20 4103821 25M 25 x 1,5 14 - 16 7 27 25 4103825 25M 25 x 1,5 16 - 18 7 27 25 4103826 25M 32 x 1,5 18 - 20 7 34 32 4103832 25M 32 x 1,5 20 - 22 7 34 32 4103833 25M 32 x 1,5 22 - 24 7 34 32 4103834 25M 40 x 1,5 24 - 26 8 42 40 4103840 10M 40 x 1,5 26 - 28 8 42 40 4103841 10M 50 x 1,5 34 - 36 9 52 50 4103850 10M 50 x 1,5 36 - 38 9 52 50 4103851 10M 63 x 1,5 46 - 48 9 65 63 4103863 5M 63 x 1,5 48 - 50 9 65 63 4103864 5

MS IP 65

Cable glandwith hexagon intermediatepartnickel-plated brassmetric-metric thread

Material:Gland element: nickel-plated brassCharacteristic feature:• intermediate part with metric thread• pressure screw with metric thread• simple sealing ring

138

Metrisch-metrisches Gewinde / metric-metric thread

Kabe

lver

schr

aubu

ngen

Cabl

e Gl

and

Syst

em

Passende Gegenmuttern Seite 143 Suitable lock nuts page 143

Page 141: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Ergä

nzun

gste

ileIn

tegr

al P

arts

139

Ergänzungsteile Accessories

Gegenmuttern

Reduktionen

Erweiterungen

Zwischenstutzen

Druckschrauben

Blindstopfen

Flanschwinkel

Verschraubungswinkel

BIMO-Verbindungsmuffe

Dichtstopfen

O-Ringe

Flachdichtungen

Dichtringe

Druckringe

Anschlussgewinde-Dichtring

Blindscheiben

Seite/page

Lock nuts 140-145

Reducers 146-153

Enlargements 154-158

Intermediate Parts 159-169

Pressure Screws 170-176

Plugs 177-182

Flange angle 183-184

Elbow 185

BIMO-connecting sleeve 186

Twisting sleeve 187

O-Rings 188

Flat Packings 189

Sealing Rings 190-191

Pressure Rings 192

Packing Ring for connection thread 193

Dummy Disc 194

Page 142: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Gewinde Stärke SW Art.-Nr. Art.-Nr. Art.-Nr. VEmm mm lichtgrau silbergrau tiefschwarz Stck.

RAL 7035 RAL 7001 RAL 9005Thread Thickness SW Art. no. Art. no. Art. no. PU

mm mm light grey silver grey jet black pcs.RAL 7035 RAL 7001 RAL 9005

Material:Polyamid 625 % glasfaserverstärktKennzeichen:• PG / metrisches und NPT-Gewinde• DIN

Lock nutsPolyamide

PA 6

PG (DIN 46 320) / PG (DIN 46320)PG 7 5 19 7211881 7211807 7211851 50PG 9 5 22 7211882 7211809 7211852 50PG 11 5 24 7211883 7211811 7211853 50PG 13,5 6 27 7211884 7211813 7211854 50PG 16 6 30 7211885 7211816 7211855 50PG 21 6,5 36 7211886 7211821 7211856 20PG 29 7,5 46 7211887 7211829 7211857 20PG 36* 8 60 7211888 7211836 7211858 10PG 42* 9 65 7211889 7211842 7211859 5PG 48* 9,5 70 7211890 7211848 7211860 5

PG „kleine“ Schlüsselweite / PG „small“ SW PG 7 5 15 7211765 7211707 7211751 50PG 9 5 19 7211766 7211709 7211752 50PG 11 5 22 7211767 7211711 7211753 50PG 13,5 5 24 7211768 7211713 7211754 50PG 16 6 27 7211769 7211716 7211755 50PG 21 6,5 32 7211770 7211721 7211756 20PG 29 7,5 41 7211771 7211729 7211757 20

metrisch / metricM 12 x 1,5 5 19 7211979 7211969 7211974 50M 16 x 1,5 5 22 7211980 7211970 7211975 50M 20 x 1,5 5 24 7211981 7211971 7211976 50M 25 x 1,5 6 30 7211982 7211972 7211977 50M 32 x 1,5 7,5 38 7211983 7211973 7211978 50M 40 x 1,5 8 50 7211984 7211987 7211990 20M 50 x 1,5 9 60 7211985 7211988 7211991 10M 63 x 1,5 10 75 7211986 7211989 7211992 5

NPT / NPTNPT 3/8" 5 22 7211485 7211490 7211495 50NPT 1/2" 6 27 7211486 7211491 7211496 20NPT 3/4" 6,5 36 7211487 7211492 7211497 20NPT 1" 7,5 41 7211488 7211493 7211498 20

* nicht glasfaserverstärkt / not glassfiber reinforced

GegenmutternPolyamid

120°–

-30°

Material:Polyamide 625 % glassfiber reinforcedCharacteristics:• PG / metric and NPT thread• DIN

Ergä

nzun

gste

ileIn

tegr

al P

arts

140

Page 143: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Gewinde Type Stärke SW Art.-Nr. Art.-Nr. VEmm mm lichtgrau tiefschwarz Stck.

RAL 7035 RAL 9005Thread Type Thickness SW Art. no. Art. no. PU

mm mm light grey jet black pcs.RAL 7035 RAL 9005

Material:PolycarbonatKennzeichen:• PG• „kleine“ Schlüsselweite

Lock nutsPolycarbonate

PC

PG / PGPG 7 CE 7 5 15 7001070 7001600 50PG 9 CE 9 5 19 7001096 7001601 50PG 11 CE11 5 22 7001118 7001602 50PG 13,5 CE13 5 24 7001134 7001603 50PG 16 CE16 6 27 7001169 7001604 50PG 21 CE21 6,5 32 7001215 7001605 20PG 29 CE29 7,5 41 7001290 7001606 20PG 42 CE42 9 65 7001428 7001608 5PG 48 CE48 9,5 70 7001487 7001609 5

GegenmutternPolycarbonat

135°–

-40°

Material:PolycarbonateCharacteristics:• PG• „small“ SW

Ergä

nzun

gste

ileIn

tegr

al P

arts

141

Page 144: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Gewinde Stärke SW Art.-Nr. Art.-Nr. Art.-Nr. VEmm mm lichtgrau silbergrau tiefschwarz Stck.

RAL 7035 RAL 7001 RAL 9005Thread Thickness SW Art. no. Art. no. Art. no. PU

mm mm light grey silver grey jet black pcs.RAL 7035 RAL 7001 RAL 9005

Material:PolystyrolKennzeichen:• PG/metrisches Gewinde• DIN und „kleine“ Schlüsselweite

Lock nutsPolystyrene

PS

PG (DIN 46 320) / PG (DIN 46320)PG 7 5 19 7211107 7211035 7211060 50PG 9 5 22 7211109 7211036 7211061 50PG 11 5 24 7211111 7211037 7211062 50PG 13 6 27 7211113 7211038 7211063 50PG 16 6 30 7211116 7211039 7211064 50PG 21 6,5 36 7211121 7211040 7211065 20PG 29 7,5 46 7211129 7211041 7211066 20PG 36 8 60 7211130 7211042 7211067 10PG 42 9 65 7211131 7211043 7211068 5PG 48 9,5 70 7211132 7211044 7211069 5

metrisch / metricM 12 x 1,5 5 19 7212212 7212012 7212112 50M 16 x 1,5 5 22 7212216 7212016 7212116 50M 20 x 1,5 5 24 7212220 7212020 7212120 50M 25 x 1,5 6 30 7212225 7212025 7212125 20M 32 x 1,5 7,5 38 7212232 7212032 7212132 20M 40 x 1,5 8 50 7212240 7212040 7212140 20M 50 x 1,5 9 60 7212250 7212050 7212150 10M 63 x 1,5 10 75 7212263 7212063 7212163 5

PG „kleine“ Schlüsselweite / PG „small“ SW PG 7 5 15 7211050 7211007 7211075 50PG 9 5 19 7211051 7211009 7211076 50PG 11 5 22 7211052 7211011 7211077 50PG 13,5 5 24 7211053 7211013 7211078 50PG 16 6 27 7211054 7211016 7211079 50PG 21 6,5 32 7211055 7211021 7211080 20PG 29 7,5 41 7211056 7211029 7211081 20

GegenmutternPolystyrol

70°–

-20°

Material:PolystyreneCharacteristics:• PG/metric thread• DIN and „small“ SW

Ergä

nzun

gste

ileIn

tegr

al P

arts

142

Page 145: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Gewinde Stärke SW Art.-Nr. VEmm mm Stck.

Thread Thickness SW Art. no. PUmm mm pcs.

Material:Messing vernickeltKennzeichen:• PG/metrisches Gewinde• DIN

Lock nutsnickel-plated brass

MS

PG (DIN 46 320) / PG (DIN 46320)PG 7 2,9 15 6000070 100PG 9 2,9 18 6000096 100PG 11 3,1 21 6000118 100PG 13,5 3,1 23 6000134 100PG 16 3,1 26 6000169 100PG 21 3,6 32 6000215 100PG 29 4,1 41 6000290 100PG 36 5,1 51 6000363 50PG 42 5,1 60 6000428 25PG 48 5,6 64 6000487 50

metrisch / metricM 6 x 1,0 3,5 8 6004067 50M 8 x 1,25 3,5 11 6004083 50M 10 x 1,5 3,5 12 6004105 50M 12 x 1,5 3 15 6004121 50M 16 x 1,5 3 20 6004164 50M 20 x 1,5 3,5 24 6004202 50M 25 x 1,5 3,5 30 6004253 25M 32 x 1,5 4,5 35 6004326 20M 40 x 1,5 4,5 45 6004407 10M 50 x 1,5 5,5 55 6004504 10M 63 x 1,5 6 70 6004636 5

GegenmutternMessing vernickelt

Material:nickel-plated brassCharacteristics:• PG/metric and NPT thread• DIN

Ergä

nzun

gste

ileIn

tegr

al P

arts

143

Page 146: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Gewinde Stärke SW Art.-Nr. VEmm mm Stck.

Thread Thickness SW Art. no. PUmm mm pcs.

Material:Messing vernickeltKennzeichen:• PG/metrisches Gewinde• DIN

Lock nutsribbednickel-plated brass

Anwendungsbereiche:• EMV-Anwendungen

MS

PG / PGPG 7 2,9 15 6011007 50PG 9 2,9 18 6011009 50PG 11 3,1 21 6011011 50PG 13,5 3,1 23 6011013 50PG 16 3,1 26 6011016 50PG 21 3,6 32 6011021 20PG 29 4,1 41 6011029 20PG 36 5,1 51 6011036 10PG 42 5,1 60 6011042 10PG 48 5,6 64 6011048 10

metrisch / metricM 12 x 1,5 3 15 6011112 50M 16 x 1,5 3 20 6011116 50M 20 x 1,5 3,5 24 6011120 50M 25 x 1,5 3,5 30 6011125 25M 32 x 1,5 4,5 35 6011132 20M 40 x 1,5 4,5 45 6011140 10M 50 x 1,5 5,5 55 6011150 10M 63 x 1,5 6 70 6011163 10

GegenmutterngeripptMessing vernickelt

Material:nickel-plated brassCharacteristics:• PG/metric thread• DIN

Applications:• EMC-applications

Ergä

nzun

gste

ileIn

tegr

al P

arts

144

Page 147: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Gewinde Stärke SW Art.-Nr. VEmm mm Stck.

Thread Thickness SW Art. no. PUmm mm pcs.

Material:Edelstahl INOX 316 LKennzeichen:• PG / metrisches Gewinde• DIN

Lock nutsstainless steel INOX 316 L

EST

PG / PGPG 7 2,9 15 6008207 50PG 9 2,9 19 6008209 50PG 11 3,1 21 6008211 50PG 13,5 3,1 23 6008213 50PG 16 3,1 26 6008216 25PG 21 3,6 32 6008221 20PG 29 4,1 42 6008229 15PG 36 5,1 57 6008236 10PG 42 5,1 60 6008242 10PG 48 5,6 65 6008248 10

metrisch / metricM 12 x 1,5 3 15 6010112 50M 16 x 1,5 3 19 6010116 50M 20 x 1,5 3,5 24 6010120 50M 25 x 1,5 3,5 30 6010125 25M 32 x 1,5 4,5 35 6010132 20M 40 x 1,5 4,5 45 6010140 1M 50 x 1,5 5,5 55 6010150 1M 63 x 1,5 6 70 6010163 1

GegenmutternEdelstahl INOX 316 L

Material:stainless steel INOX 316 LCharacteristics:• PG / metric thread• DIN

Ergä

nzun

gste

ileIn

tegr

al P

arts

145

Page 148: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type SW Gewinde- Art.-Nr. VEgewinde gewinde mm länge Stck.

mmExternal Internal Type SW Thread Art. no. PUthread thread mm length pcs.

mm

Material:PolycarbonatKennzeichen:• PG-Aussengewinde• PG-Innengewinde• 6-kant

ReducerPolycarbonate

PC

PG PG PG PGForm A / Form APG 11 PG 7 RED 11/7M 22 8 7005016 50PG 13,5 PG 7 RED 13/7M 24 9 7005024 50PG 13,5 PG 9 RED 13/9M 24 9 7005032 50PG 16 PG 9 RED 16/9M 27 9 7005040 50PG 16 PG 11 RED 16/11M 27 9 7005059 50PG 21 PG 11 RED 21/11M 32 11 7005067 25PG 21 PG 13,5 RED 21/13M 32 11 7005075 25PG 21 PG 16 RED 21/16M 32 11,3 7005202 25PG 29 PG 13,5 RED 29/13M 41 12 7005083 25PG 29 PG 16 RED 29/16M 41 12 7005091 25PG 29 PG 21 RED 29/21M 41 12 7005210 25PG 36 PG 16 RED 36/16M 50 14 7005105 1PG 36 PG 21 RED 36/21M 55 14 7005113 1PG 36 PG 29 RED 36/29M 50 14 7005229 1PG 42 PG 21 RED 42/21M 55 16 7005121 1PG 42 PG 29 RED 42/29M 55 16 7005130 1PG 42 PG 36 RED 42/36M 55 16 7005237 1PG 48 PG 29 RED 48/29M 60 16 7005148 1PG 48 PG 36 RED 48/36M 60 16 7005156 1

Form B / Form BPG 9 PG 7 RED 9/7M 19 7 7005164 50PG 11 PG 9 RED 11/9M 22 8 7005172 50PG 13,5 PG 11 RED 13/11M 24 9 7005180 50PG 16 PG 13,5 RED 16/13M 27 9 7005199 50PG 48 PG 42 RED 48/42M 60 15,5 7005245 1

ReduktionenPolycarbonat

135°–

-40°

PG ❖ PG / PG ❖ PG

Material:PolycarbonateCharacteristics:• PG external thread• PG internal thread• hexagon

Ergä

nzun

gste

ileIn

tegr

al P

arts

146

Page 149: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type SW Gewinde- Art.-Nr. VEgewinde gewinde mm länge Stck.

mmExternal Internal Type SW Thread Art. no. PUthread thread mm length pcs.

mm

Material:PolyamidglasfaserverstärktKennzeichen:• PG-Aussengewinde• PG-Innengewinde• 6-kant

ReducerPolyamide

PA

PG PG PG PGForm B / Form BPG 11 PG 7 1107 PA 22 8 7005302 100PG 13,5 PG 7 1307 PA 24 9 7005304 100PG 13,5 PG 9 1309 PA 24 9 7005305 100PG 16 PG 9 1609 PA 27 10 7005307 100PG 16 PG 11 1611 PA 27 10 7005308 100PG 21 PG 11 2111 PA 32 10,5 7005310 100PG 21 PG 13,5 2113 PA 32 10,5 7005311 100PG 21 PG 16 2116 PA 32 10,5 7005312 100PG 29 PG 13,5 2913 PA 39 12 7005313 50PG 29 PG 16 2916 PA 39 12 7005314 50PG 29 PG 21 2921 PA 40 12 7005315 50PG 36 PG 16 3616 PA 50 13 7005316 50PG 36 PG 21 3621 PA 50 13 7005317 50PG 36 PG 29 3629 PA 50 13 7005318 50PG 42 PG 21 4221 PA 55 16 7005319 25PG 42 PG 29 4229 PA 55 16 7005320 25PG 42 PG 36 4236 PA 55 17 7005321 25PG 48 PG 29 4829 PA 60 17 7005322 25PG 48 PG 36 4836 PA 60 17 7005323 25PG 48 PG 42 4842 PA 60 17 7005324 25

Form A / Form APG 9 PG 7 907 PA 19 8 7005301 100PG 11 PG 9 1109 PA 22 8 7005303 100PG 13 PG 11 1311 PA 24 9 7005306 100PG 16 PG 13 1613 PA 27 10 7005309 100

ReduktionenPolyamid

100°–

-40°

PG ❖ PG / PG ❖ PG

Material:Polyamideglassfiber reinforcedCharacteristics:• PG external thread• PG internal thread• hexagon

Ergä

nzun

gste

ileIn

tegr

al P

arts

147

Page 150: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- SW Gewinde- Art.-Nr. Art.-Nr. Art.-Nr. VEgewinde gewinde mm länge lichtgrau silbergrau tiefschwarz Stck.

mm RAL 7001 RAL 7035 RAL 9005External Internal SW Thread Art. no. Art. no. Art. no. PUthread thread mm length light grey silver grey jet black pcs.

mm RAL 7035 RAL 7001 RAL 9005

Material:PolyamidglasfaserverstärktKennzeichen:• großes metrisches Aussengewinde• kleines metrisches Innengewinde• 6-kant

ReducerPolyamide

PA

metrisch metrischmetric metricM 16 x 1,5 M 12 x 1,5 20 8 7008516 7008616 7008716 100M 20 x 1,5 M 12 x 1,5 24 8 7008020 7008220 100M 20 x 1,5 M 16 x 1,5 24 9 7008520 7008620 7008720 100M 25 x 1,5 M 12 x 1,5 29 8 7008030 7008230 100M 25 x 1,5 M 16 x 1,5 29 8 7008031 7008231 100M 25 x 1,5 M 20 x 1,5 30 10 7008525 7008625 7008725 100M 32 x 1,5 M 12 x 1,5 36 10 7008040 7008240 50M 32 x 1,5 M 16 x 1,5 36 10 7008041 7008241 50M 32 x 1,5 M 20 x 1,5 36 10 7008042 7008242 50M 32 x 1,5 M 25 x 1,5 36 11 7008532 7008632 7008732 50M 40 x 1,5 M 16 x 1,5 46 10 7008044 7008244 50M 40 x 1,5 M 20 x 1,5 46 10 7008045 7008245 50M 40 x 1,5 M 25 x 1,5 46 10 7008046 7008246 50M 40 x 1,5 M 32 x 1,5 44 12 7008540 7008640 7008740 50M 50 x 1,5 M 20 x 1,5 55 12 7008050 7008250 25M 50 x 1,5 M 25 x 1,5 55 12 7008051 7008251 25M 50 x 1,5 M 32 x 1,5 55 12 7008052 7008252 25M 50 x 1,5 M 40 x 1,5 55 13 7008550 7008650 7008750 25M 63 x 1,5 M 25 x 1,5 68 12 7008060 7008260 25M 63 x 1,5 M 32 x 1,5 68 12 7008061 7008261 25M 63 x 1,5 M 40 x 1,5 68 12 7008062 7008262 25M 63 x 1,5 M 50 x 1,5 70 15 7008563 7008663 7008763 25

ReduktionenPolyamid

100°–

-40°

Metrisch ❖ Metrisch / Metric ❖ Metric

Material:Polyamideglassfiber reinforcedCharacteristics:• large metric external thread• small metric internal thread• hexagon

Ergä

nzun

gste

ileIn

tegr

al P

arts

148

Page 151: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type SW Gewinde- Gesamt- Art.-Nr. VEgewinde gewinde mm länge länge Stck.

mm mmExternal Internal Type SW Thread Complete Art. no. PUthread thread mm length length pcs.

mm mm

Material:Messing vernickeltKennzeichen:• PG-Aussengewinde• PG-Innengewinde• 6-kant

Reducernickel-plated brass

MS

PG PG PG PGPG 9 PG 7 RS9/7 17 5 8 6102018 100PG 11 PG 9 RS11/9 19 6 9 6102034 100PG 11 PG 7 RS11/7 19 6 9 6102030 100PG 13,5 PG 11 RS13,5/11 21 6 9 6102077 100PG 13,5 PG 9 RS13,5/9 21 6 9 6102042 100PG 13,5 PG 7 RS13,5/7 21 6 8,5 6102026 100PG 16 PG 13,5 RS16/13 23 6 9 6102115 100PG 16 PG 11 RS16/11 23 6 9 6102085 100PG 16 PG 9 RS16/9 23 6 9 6102050 100PG 21 PG 16 RS21/16 29 7 10 6102158 50PG 21 PG 13,5 RS21/13,5 29 7 10 6102123 50PG 21 PG 11 RS21/11 29 7 10 6102093 20PG 21 PG 9 RS21/9 29 7 10 6102069 50PG 29 PG 21 RS29/21 39 8 11 6102190 25PG 29 PG 16 RS29/16 39 8 11 6102166 25PG 29 PG 13,5 RS29/13,5 39 8 11 6102131 25PG 29 PG 11 RS29/11 39 8 11 6102107 25PG 36 PG 29 RS36/29 50 8 11 6102220 25PG 36 PG 21 RS36/21 50 8 11 6102204 25PG 36 PG 13,5 RS36/13,5 50 8 11 6102140 25PG 42 PG 36 RS42/36 64 10 14 6102241 25PG 42 PG 29 RS42/29 64 10 14 6102239 25PG 48 PG 42 RS48/42 64 10 14 6102258 25PG 48 PG 36 RS48/36 64 10 14 6102255 25PG 48 PG 29 RS48/29 64 10 14 6102247 25PG 48 PG 21 RS48/21 64 10 14 6102212 25PG 48 PG 16 RS48/16 64 10 14 6102182 25

ReduktionenMessing vernickelt

PG ❖ PG / PG ❖ PG

Material:nickel-plated brassCharacteristics:• PG external thread• PG internal thread• hexagon

Ergä

nzun

gste

ileIn

tegr

al P

arts

149

Page 152: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type SW Gewinde- Gesamt- Art.-Nr. Art.-Nr. VEgewinde gewinde mm länge länge ohne mit O-Ring Stck.

mm mm O-RingExternal Internal Type SW Thread Complete Art. no. Art. no. PUthread thread mm length length without with O-ring pcs.

mm mm O-ring

Material:Messing vernickeltKennzeichen:• metrisches, bzw. PG-Aussengewinde• metrisches Innengewinde• 6-kant

Reducernickel-plated brass

MS

metrisch metrischmetric metricM 16 x 1,5 M 12 x 1,5 RSM16/12 20 7 10 6102400 6102450 50M 20 x 1,5 M 12 x 1,5 RSM20/12 24 7 10 6102404 6102455 50M 20 x 1,5 M 16 x 1,5 RSM20/16 24 7 10 6102405 6102460 50M 25 x 1,5 M 20 x 1,5 RSM25/20 30 8 11,5 6102410 6102465 20M 32 x 1,5 M 25 x 1,5 RSM32/25 36 8,5 12,5 6102415 6102470 20M 40 x 1,5 M 32 x 1,5 RSM40/32 42 8,5 12,5 6102420 6102475 10M 50 x 1,5 M 40 x 1,5 RSM50/40 55 9,5 14,5 6102425 6102480 5M 63 x 1,5 M 50 x 1,5 RSM63/50 70 10,5 17,5 6102430 6102485 1M 75 x 1,5 M 63 x 1,5 RSM75/63 80 11,5 19,5 6102435 6102490 1

PG metrisch PG metricPG 9 M 6 x 1,0 3509.M 6 18 6,5 9,5 6104106 50PG 9 M 8 x 1,25 3509.M 8 18 6,5 9,5 6104108 50PG 9 M 10 x 1,5 3509.M 10 18 6,5 9,5 6104110 50PG 11 M 6 x 1,0 3511.M 6 20 6,5 9,5 6104206 50PG 11 M 8 x 1,25 3511.M 8 20 6,5 9,5 6104208 50PG 11 M 10 x 1,5 3511.M 10 20 6,5 9,5 6104210 50PG 11 M 12 x 1,5 3511.M 12 20 5 8 6104212 50PG 16 M 16 x 1,5 3516.M 16 24 7 10 6104416 50PG 21 M 25 x 1,5 3521.M 25 30 7,5 11 6104525 50PG 29 M 32 x 1,5 3529.M 32 38 8 12 6104632 50

ReduktionenMessing vernickelt

Material:nickel-plated brassCharacteristics:• metric, resp. PG external thread• metric internal thread• hexagon

Ergä

nzun

gste

ileIn

tegr

al P

arts

150

Metrisch/PG ❖ Metrisch / Metric/PG ❖ Metric

Page 153: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type Durch- Gewinde- Gesamt- Art.-Nr. VEgewinde gewinde messer länge länge Stck.

mm mm mmExternal Internal Type Diameter Thread Complete Art. no. PUthread thread mm length length pcs.

mm mm

Material:Messing vernickeltKennzeichen:• PG-Aussengewinde• PG- bzw. Gas-Innengewinde• rund

Reduceraccording DIN 46320 andDIN 259millednickel-plated brass

MS

nach DIN 46320 / to DIN 46320PG PG PG PGPG 9 PG 7 90007 17 6 8,5 6100015 50PG 11 PG 7 11007 20 6 8,5 6100023 50PG 11 PG 9 11009 20 6 9 6100031 50PG 13,5 PG 7 13507 22 6,5 9 6100040 50PG 13,5 PG 9 13509 22 6,5 9,5 6100058 50PG 13,5 PG 11 13511 22 6,5 9,5 6100066 50PG 16 PG 7 16007 24 6,5 9,5 6100074 25PG 16 PG 9 16009 24 6,5 9,5 6100082 25PG 16 PG 11 16011 24 6,5 9,5 6100090 25PG 16 PG 13,5 16135 24 6,5 9,5 6100104 25PG 21 PG 11 21011 30 7 10 6100112 20PG 21 PG 13,5 21135 30 7 10 6100120 20PG 21 PG 16 21016 30 7 10 6100139 20PG 29 PG 16 29016 39 8 11,5 6100147 15PG 29 PG 21 29021 39 8 11,5 6100155 15PG 36 PG 21 36021 50 9 12,5 6100163 10PG 36 PG 29 36029 50 9 12,5 6100171 10PG 42 PG 29 42029 57 10 14 6100180 10PG 42 PG 36 42036 57 10 14 6100198 10PG 48 PG 36 48036 64 10 14 6100201 10PG 48 PG 42 48042 64 10 14 6100210 10

nach DIN 259 / to DIN 259PG GasPG GasPG 11 R 3/8" 11038 20 6 8,5 6100228 50PG 13,5 R 3/8" 13538 22 6,5 9 6100260 50PG 16 R 3/8" 16038 24 6,5 9,5 6100236 25PG 16 R 1/2" 16012 24 6,5 9,5 6100317 25

Reduktionennach DIN 46320 und DIN 259gerändeltMessing vernickelt

Material:nickel-plated brassCharacteristics:• PG external thread• PG, resp. Gas internal thread• round

Ergä

nzun

gste

ileIn

tegr

al P

arts

151

PG ❖ PG/Gas / PG ❖ PG/Gas

Page 154: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Durchmesser Gewinde- Gesamt- Art.-Nr. Art.-Nr. VEgewinde gewinde mm länge länge ohne O-Ring mit O-Ring Stck.

mm mmExternal Internal Diameter Thread Complete Art. no. Art. no. PUthread thread mm length length without with O-ring pcs.

mm mm O-ring

Material:Messing vernickeltKennzeichen:• metrisches Aussengewinde• PG-Innengewinde• rund

Reducermillednickel-plated brass

MS

metrisch PGmetric PGM 16 x 1,5 PG 7 20 6 9 6104716 6104770 50M 20 x 1,5 PG 9 24 6,5 9,5 6104720 6104771 50M 25 x 1,5 PG 11 30 7 10 6104725 6104772 50M 25 x 1,5 PG 13,5 30 7 10 6104726 6104773 50M 25 x 1,5 PG 16 30 7 10 6104727 6104774 50M 32 x 1,5 PG 16 39 8 11,5 6104732 6104775 20M 32 x 1,5 PG 21 39 8 11,5 6104733 6104776 20M 40 x 1,5 PG 21 50 9 12 6104740 6104777 10M 50 x 1,5 PG 29 57 9 12 6104750 6104778 5M 63 x 1,5 PG 36 70 10,5 14,5 6104763 6104779 1M 63 x 1,5 PG 42 70 10,5 14,5 6104764 6104780 1

ReduktionengerändeltMessing vernickelt

Material:nickel-plated brassCharacteristics:• metric external thread• PG internal thread• round

Ergä

nzun

gste

ileIn

tegr

al P

arts

152

Metrisch ❖ PG / Metric ❖ PG

Page 155: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Durch- Gewinde- Gesamt- Art.-Nr. VEgewinde gewinde messer länge länge Stck.

mm mm mmExternal Internal Diameter Thread Complete Art. no. PUthread thread mm length length pcs.

mm mm

Material:Messing vernickeltKennzeichen:• metrisches, bzw. PG-Aussengewinde• metrisches Innengewinde• rund

Reducermillednickel-plated brass

MS

metrisch metrischmetric metricM 16 x 1,5 M 12 x 1,5 20 7 10 6104816 50M 20 x 1,5 M 12 x 1,5 24 7 10 6104819 50M 20 x 1,5 M 16 x 1,5 24 7 10 6104820 50M 25 x 1,5 M 16 x 1,5 30 8 11,5 6104824 50M 25 x 1,5 M 20 x 1,5 30 8 11,5 6104825 50M 32 x 1,5 M 20 x 1,5 39 8,5 12,5 6104831 20M 32 x 1,5 M 25 x 1,5 39 8,5 12,5 6104832 20M 40 x 1,5 M 25 x 1,5 50 8,5 12,5 6104839 20M 40 x 1,5 M 32 x 1,5 50 8,5 12,5 6104840 20M 50 x 1,5 M 32 x 1,5 57 9,5 14,5 6104849 10M 50 x 1,5 M 40 x 1,5 57 9,5 14,5 6104850 10M 63 x 1,5 M 40 x 1,5 70 10,5 17,5 6104862 5M 63 x 1,5 M 50 x 1,5 70 10,5 17,5 6104863 5M 75 x 1,5 M 63 x 1,5 80 11,5 19,5 6104875 1

PG metrisch PG metricPG 16 M 20 x 1,5 24 7 10 6100416 50PG 21 M 25 x 1,5 30 8 11,5 6100421 20PG 29 M 25 x 1,5 39 9 12,5 6100429 20

ReduktionengerändeltMessing vernickelt

Material:nickel-plated brassCharacteristics:• metric resp. PG external thread• metric internal thread• round

Ergä

nzun

gste

ileIn

tegr

al P

arts

153

Metrisch/PG ❖ Metrisch / Metric/PG ❖ Metric

Page 156: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type SW Gewinde- Gesamt- Art.-Nr. VEgewinde gewinde mm länge länge Stck.

mm mmExternal Internal Type SW Thread Complete Art. no. PUthread thread mm length length pcs.

mm mm

Material:PolycarbonatKennzeichen:• PG-Aussengewinde• PG-Innengewinde

EnlargerPolycarbonate

PC

PG PG PG PGPG 7 PG 9 AMP 7/9M 19 6,5 19 7004010 50PG 9 PG 11 AMP 9/11M 22 7 21,5 7004028 50PG 11 PG 13,5 AMP 11/13M 24 9 23,5 7004036 50PG 13,5 PG 16 AMP 13/16M 27 9 23 7004044 50PG 16 PG 21 AMP 16/21M 32 10 25,5 7004052 25PG 21 PG 29 AMP 21/29M 41 10 28,5 7004060 25PG 29 PG 36 AMP 29/36M 55 12 38 7004079 1PG 36 PG 42 AMP 36/42M 60 14 45 7004087 1PG 42 PG 48 AMP 42/48M 65 16 39 7004095 1

ErweiterungenPolycarbonat

135°–

-40°

PG ❖ PG / PG ❖ PG

Material:PolycarbonateCharacteristics:• PG external thread• PG internal thread

Ergä

nzun

gste

ileIn

tegr

al P

arts

154

Page 157: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type SW Gewinde- Gesamt- Art.-Nr. Art.-Nr. Art.-Nr. VEgewinde gewinde mm länge länge lichtgrau silbergrau tiefschwarz Stck.

mm mm RAL 7035 RAL 7001 RAL 9005External Internal Type SW Thread Complete Art. no. Art. no. Art. no. PUthread thread mm length length light grey silver grey jet black pcs.

mm mm RAL 7035 RAL 7001 RAL 9005

Material:Polyamid glasfaserverstärktKennzeichen:• PG-, bzw. metrisches Aussengewinde• PG-, bzw. metrisches Innengewinde

EnlargerPolyamide

PA

PG PG PG PGPG 7 PG 9 709PA 19 7 20 7004200 100PG 9 PG 11 911PA 22 8 23 7004201 100PG 11 PG 13,5 1113PA 24 8 23 7004202 100PG 13,5 PG 16 1316PA 27 9 26 7004203 100PG 16 PG 21 1621PA 32 9 29 7004204 100PG 21 PG 29 2129PA 42 10 32 7004205 50PG 29 PG 36 2936PA 53 11 35,5 7004206 25PG 36 PG 42 3642PA 60 13 40,5 7004207 10PG 42 PG 48 4248PA 65 13 41 7004208 10

metrisch metrischmetric metricM 12 x 1,5 M 16 x 1,5 AMP 12/16 20 8 18,5 7004300 7004310 7004320 50M 16 x 1,5 M 20 x 1,5 AMP 16/20 24 8 20 7004301 7004311 7004321 50M 20 x 1,5 M 25 x 1,5 AMP 20/25 30 9 22 7004302 7004312 7004322 50M 25 x 1,5 M 32 x 1,5 AMP 25/32 36 10 24 7004303 7004313 7004323 20M 32 x 1,5 M 40 x 1,5 AMP 32/40 44 11 26 7004304 7004314 7004324 20M 40 x 1,5 M 50 x 1,5 AMP 40/50 55 12 28 7004305 7004315 7004325 20M 50 x 1,5 M 63 x 1,5 AMP 50/63 70 13 31,5 7004306 7004316 7004326 10

ErweiterungenPolyamid

100°–

-30°

PG ❖ PG / Metrisch ❖ Metrisch / PG ❖ PG / Metric ❖ Metric

Material:Polyamide glassfiber reinforcedCharacteristics:• PG, resp. metric external thread• PG, resp. metric internal thread

Ergä

nzun

gste

ileIn

tegr

al P

arts

155

Page 158: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type Durch- Gewinde- Gesamt- Art.-Nr. VEgewinde gewinde messer länge länge Stck.

mm mm mmExternal Internal Type Diameter Thread Complete Art. no. PUthread thread mm length length pcs.

mm mm

Material:Messing vernickeltKennzeichen:• PG-, bzw. Gas-Aussengewinde• PG-Innengewinde• rund

Enlargeracc. to DIN 46 320 and DIN 259nickel-plated brass

MS

nach DIN 46320 / to DIN 46 320PG PGPG PGPG 7 PG 9 70009 17 5 15 6200010 50PG 9 PG 11 90011 20 6 16,5 6200028 50PG 9 PG 13,5 90135 22 6 17,5 6200036 50PG 11 PG 13,5 11135 22 6 17,5 6200044 50PG 11 PG 16 11016 24 6 18,5 6200052 25PG 13,5 PG 16 13516 24 6,5 19 6200060 25PG 13,5 PG 21 13521 30 6,5 21 6200079 20PG 16 PG 21 16021 30 6,5 21 6200087 20PG 21 PG 29 21029 39 7 23 6200095 15PG 29 PG 36 29036 50 8 28 6200109 10PG 36 PG 42 36042 57 9 31 6200117 10PG 42 PG 48 42048 64 10 33 6200125 10

nach DIN 259 / to DIN 259Gas PGGas PGR 3/8" PG 9 38009 17 6 16 6200133 50R 3/8" PG 11 38011 20 6 16,5 6200141 50R 3/8" PG 13,5 38135 22 6 18 6200150 50R 3/8" PG 16 38016 24 6 19,5 6200168 25R 1/2" PG 13,5 12135 22 6,5 19 6200176 25R 1/2" PG 16 12016 24 6,5 19 6200184 25

Erweiterungennach DIN 46320 und DIN 259Messing vernickelt

Material:nickel-plated brassCharacteristics:• PG, resp. gas thread• PG internal thread• round

Ergä

nzun

gste

ileIn

tegr

al P

arts

156

PG/Gas ❖ PG / PG/Gas ❖ PG

Page 159: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type Durch- Gewinde- Gesamt- Art.-Nr. VEgewinde gewinde messer länge länge Stck.

mm mm mmExternal Internal Type Diameter Thread Complete Art. no. PUthread thread mm length length pcs.

mm mm

Material:Messing vernickeltKennzeichen:• metrisches Aussengewinde• metrisches Innengewinde• rund

Enlargernickel-plated brass

MS

metrisch metrischmetric metricM 12 x 1,5 M 16 x 1,5 M12/M16 RD 18 5 15 6200212 50M 16 x 1,5 M 20 x 1,5 M16/M20 RD 22 6 17,5 6200216 50M 20 x 1,5 M 25 x 1,5 M20/M25 RD 27 6,5 19 6200220 50M 25 x 1,5 M 32 x 1,5 M25/M32 RD 34 8 20,5 6200225 20M 32 x 1,5 M 40 x 1,5 M32/M40 RD 42 7 23 6200232 20M 40 x 1,5 M 50 x 1,5 M40/M50 RD 53 9 31 6200240 10M 50 x 1,5 M 63 x 1,5 M50/M63 RD 65 9,5 24 6200250 5M 63 x 1,5 M 75 x 1,5 M63/M75 RD 80 10,5 26 6200263 1

ErweiterungenMessing vernickelt

Material:nickel-plated brassCharacteristics:• metric external thread• metric internal thread• round

Ergä

nzun

gste

ileIn

tegr

al P

arts

157

Metrisch ❖ Metrisch / Metric ❖ Metric

Page 160: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type SW Gewinde- Gesamt- Art.-Nr. Art.-Nr. VEgewinde gewinde mm länge länge ohne mit O-Ring Stck.

mm mm O-RingExternal Internal Type SW Thread Complete Art. no. Art. no. PUthread thread mm length length without with O-ring pcs.

mm mm O-ring

Material:Messing vernickeltKennzeichen:• metrisches Aussengewinde• metrisches Innengewinde• 6-kant

Enlargernickel-plated brass

MS

metrisch metrischmetric metricM10 x 1,5 M12 x 1,5 M10/M12 14 7 19 6200310 6200410 50M12 x 1,5 M16 x 1,5 M12/M16 19 7 19 6200312 6200412 50M16 x 1,5 M20 x 1,5 M16/M20 22 7 19 6200316 6200416 50M20 x 1,5 M25 x 1,5 M20/M25 28 7 20 6200320 6200420 50M25 x 1,5 M32 x 1,5 M25/M32 36 8 21,5 6200325 6200425 20M32 x 1,5 M40 x 1,5 M32/M40 42 8,5 22 6200332 6200432 20M40 x 1,5 M50 x 1,5 M40/M50 52 8,5 23 6200340 6200440 10M50 x 1,5 M63 x 1,5 M50/M63 65 9,5 25 6200350 6200450 5M63 x 1,5 M75 x 1,5 M63/M75 80 10,5 27,5 6200363 6200463 1

ErweiterungenMessing vernickelt

Metrisch ❖ Metrisch / Metric ❖ Metric

Material:nickel-plated brassCharacteristics:• metric external thread• metric internal thread• hexagon

Ergä

nzun

gste

ileIn

tegr

al P

arts

158

Page 161: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type SW Gewinde- Gesamt- Art.-Nr. VEgewinde gewinde mm länge länge Stck.

mm mmExternal Internal Type SW Thread Complete Art. no. PUthread thread mm length length pcs.

mm mm

Material:PolystyrolKennzeichen:• PG-Aussengewinde• PG-Innengewinde

Intermediate Partaccording to DIN 46 320impact resistant Polystyrene

PS

PG PG PG PGPG 7 PG 7 0307PgU 15 8 21 7208073 lose/loosePG 9 PG 9 0309PgU 19 8 22 7208090 lose/loosePG 11 PG 11 0311PgU 22 8 23 7208111 lose/loosePG 13,5 PG 13,5 0313PgU 24 9 26 7208138 lose/loosePG 16 PG 16 0316PgU 27 10 28 7208162 lose/loosePG 21 PG 21 0321PgU 33 11 31 7208219 lose/loosePG 29 PG 29 0329PgU 42 11 33 7208294 lose/loosePG 36 PG 36 0336PgU 53 13 38 7208367 lose/loosePG 42 PG 42 0342PgU 60 13 41 7208421 lose/loose

Zwischenstutzennach DIN 46 320aus schlagfestem Polystyrol

PG ❖ PG / PG ❖ PG

Material:PolystyreneCharacteristics:• PG external thread• PG internal thread

Ergä

nzun

gste

ileIn

tegr

al P

arts

159

Page 162: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type Durchmesser Gewinde- Gesamt- Art.-Nr. VEgewinde gewinde mm länge länge Stck.

mm mmExternal Internal Type Diameter Thread Complete Art. no. PUthread thread mm length length pcs.

mm mm

Material:Messing vernickeltKennzeichen:• PG-Aussengewinde• PG-Innengewinde• rund

Intermediate Partaccording to DIN 46 320nickel-plated brass

MS

kurzes Gewinde / short threadPG PG PG PGPG 7 PG 7 7005 14 5 15 6604072 lose/loosePG 9 PG 9 9005 17 6 16,5 6604099 lose/loosePG 11 PG 11 1105 20 6 17 6604110 lose/loosePG 13,5 PG 13,5 1355 22 6,5 19 6604137 lose/loosePG 16 PG 16 1605 24 6,5 20 6604161 lose/loosePG 21 PG 21 2105 30 7 22 6604218 lose/loosePG 29 PG 29 2905 39 8 24,5 6604293 lose/loosePG 36 PG 36 3605 50 9 28,5 6604366 lose/loosePG 42 PG 42 4205 57 10 32 6604420 lose/loosePG 48 PG 48 4805 64 10 33 6604480 lose/loose

langes Gewinde / long threadPG 7 PG 7 7005/15 14 15 25 6604501 lose/loosePG 9 PG 9 9005/15 17 15 25,5 6604510 lose/loosePG 11 PG 11 1105/15 20 15 26 6604528 lose/loosePG 13,5 PG 13,5 1355/5 22 15 27,5 6604536 lose/loosePG 16 PG 16 1605/15 24 15 28,5 6604544 lose/loosePG 21 PG 21 2105/15 30 15 30 6604552 lose/loosePG 29 PG 29 2905/15 39 15 31,5 6604560 lose/loosePG 36 PG 36 3605/15 50 15 34,5 6604579 lose/loosePG 42 PG 42 4205/15 57 15 37 6604587 lose/loosePG 48 PG 48 4805/15 64 15 38 6604595 lose/loose

Zwischenstutzennach DIN 46 320Messing vernickelt

PG ❖ PG / PG ❖ PG

Material:nickel-plated brassCharacteristics:• PG external thread• PG internal thread• round

160

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 163: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type SW Gewinde- Gesamt- Art.-Nr. VEgewinde gewinde mm länge länge Stck.

mm mmExternal Internal Type SW Thread Complete Art. no. PUthread thread mm length length pcs.

mm mm

Material:Messing vernickeltKennzeichen:• PG-Aussengewinde• PG-Innengewinde• 6-kant

Intermediate Partaccording to DIN 46 320nickel-plated brass

MS

PG PG PG PGkurzes Gewinde / short threadPG 7 PG 7 7007 14 5 15 6606075 lose/loosePG 9 PG 9 9007 17 6 16,5 6606091 lose/loosePG 11 PG 11 1107 20 6 17 6606113 lose/loosePG 13,5 PG 13,5 1357 22 6,5 19 6606130 lose/loosePG 16 PG 16 1607 24 6,5 20 6606164 lose/loosePG 21 PG 21 2107 30 7 22 6606210 lose/loosePG 29 PG 29 2907 40 8 24,5 6606296 lose/loosePG 36 PG 36 3607 50 9 28,5 6606369 lose/loosePG 42 PG 42 4207 57 10 32 6606423 lose/loosePG 48 PG 48 4807 64 10 33 6606482 lose/loose

langes Gewinde / long threadPG 9 PG 9 9007/15 17 15 25,5 6606504 lose/loosePG 11 PG 11 1107/15 20 15 26 6606512 lose/loosePG 13,5 PG 13,5 1357/15 22 15 27,5 6606520 lose/loosePG 16 PG 16 1607/15 24 15 28,5 6606539 lose/loosePG 21 PG 21 2107/15 30 15 30 6606547 lose/loosePG 29 PG 29 2907/15 40 15 31,5 6606555 lose/loosePG 36 PG 36 3607/15 50 15 34,5 6606563 lose/loosePG 42 PG 42 4207/15 57 15 37 6606571 lose/loosePG 48 PG 48 4807/15 64 15 38 6606580 lose/loose

Zwischenstutzennach DIN 46 320Messing vernickelt

PG ❖ PG / PG ❖ PG

Material:nickel-plated brassCharacteristics:• PG external thread• PG internal thread• hexagon

161

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 164: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type SW Gewinde- Gesamt- Art.-Nr. Art.-Nr. VEgewinde gewinde mm länge länge ohne mit O-Ring Stck.

mm mm O-RingExternal Internal Type SW Thread Complete Art. no. Art. no. PUthread thread mm length length without with O-ring pcs.

mm mm O-ring

Material:Messing vernickeltKennzeichen:• PG-Aussengewinde• metrisches Innengewinde• 6-kant

Intermediate Partas adapter between PG-and metric threadnickel-plated brass

MS

Form A / Form APG metrischPG metricPG 7 M 12 x 1,5 0712 17 6,5 16,5 6604807 50PG 7 M 16 x 1,5 0716 19 6,5 16,5 6604808 50PG 9 M 16 x 1,5 0916 19 6,5 16,5 6604810 6604863 50PG 9 M 20 x 1,5 0920 22 6,5 18,5 6604811 50PG 11 M 20 x 1,5 1120 22 7 17 6604813 50PG 11 M 25 x 1,5 1125 27 7 18 6604814 50PG 13,5 M 20 x 1,5 1320 24 7 17 6604816 6604869 50PG 13,5 M 25 x 1,5 1325 27 7 18 6604817 50PG 16 M 20 x 1,5 1620 27 7 16 6604818 50PG 16 M 25 x 1,5 1625 27 7 18 6604819 6604872 50PG 16 M 32 x 1,5 1632 36 7 18,5 6604820 50PG 21 M 32 x 1,5 2132 36 8 19,5 6604822 6604875 20PG 21 M 40 x 1,5 2140 42 8 19,5 6604823 20PG 29 M 40 x 1,5 2940 42 8,5 20 6604831 6604879 20PG 29 M 50 x 1,5 2950 55 8,5 21 6604832 20PG 36 M 50 x 1,5 3650 55 8,5 21 6604837 6604882 10PG 42 M 63 x 1,5 4263 65 10 23,5 6604843 5PG 48 M 63 x 1,5 4863 65 10 24,5 6604849 5PG 48 M 75 x 1,5 4875 80 10 24,5 6604850 5

Form B / Form BPG 9 M 12 x 1,5 0912 19 6,5 10 6604809 50PG 11 M 16 x 1,5 1116 22 7 11 6604812 6604865 50PG 13,5 M 16 x 1,5 1316 24 7 11 6604815 50PG 21 M 25 x 1,5 2125 32 8 13 6604821 20PG 29 M 25 x 1,5 2925 40 8,5 14 6604829 6604877 20PG 29 M 32 x 1,5 2932 40 8,5 14 6604830 20PG 36 M 40 x 1,5 3640 55 8,5 15 6604836 10PG 42 M 50 x 1,5 4250 58 10 16,5 6604842 5PG 48 M 50 x 1,5 4850 65 10 17 6604848 5

Zwischenstutzenals Übergang von PG- auf metrisches GewindeMessing vernickelt

PG ❖ Metrisch / PG ❖ Metric

Material:nickel-plated brassCharacteristics:• PG external thread• PG internal thread• hexagon

162

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 165: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type SW Gewinde- Gesamt- Art.-Nr. Art.-Nr. VEgewinde gewinde mm länge länge ohne mit O-Ring Stck.

mm mm O-RingExternal Internal Type SW Thread Complete Art. no. Art. no. PUthread thread mm length length without with O-ring pcs.

mm mm O-ring

Material:Messing vernickeltKennzeichen:• metrisches Aussengewinde• PG, bzw. metrisches Innengewinde• 6-kant

Intermediate Partas adapter between metric-and PG-, resp. metric threadnickel-plated brass

MS

metrisch PG metric PGM 12 x 1,5 PG 7 1207 14 7 17 6604712 6604658 100M 16 x 1,5 PG 9 1609 18 7 17,5 6604716 6604660 50M 16 x 1,5 PG 11 1611 20 7 18 6604715 6604661 50M 16 x 1,5 PG 13 1613 22 7 19,5 6604709 6604662 50M 16 x 1,5 PG 16 1616 24 7 21,5 6604717 6604663 50M 20 x 1,5 PG 11 2011 22 7 18 6604720 6604666 50M 20 x 1,5 PG 13 2013 22 7 19,5 6604721 6604664 50M 20 x 1,5 PG 16 2016 24 7 20,5 6604722 6604667 50M 20 x 1,5 PG 21 2021 32 7 22,5 6604708 6604668 50M 25 x 1,5 PG 16 2516 27 8 21,5 6604726 6604669 50M 25 x 1,5 PG 21 2521 32 8 23 6604725 6604674 50M 25 x 1,5 PG 29 2529 40 8 25 6604727 6604676 20M 32 x 1,5 PG 21 3221 34 8,5 23,5 6604729 6604672 20M 32 x 1,5 PG 29 3229 40 8,5 25 6604732 6604681 10M 40 x 1,5 PG 29 4029 42 8,5 25 6604734 6604675 10M 40 x 1,5 PG 36 4036 50 8,5 28 6604740 6604685 10M 50 x 1,5 PG 36 5036 52 9,5 29 6604742 6604678 10M 50 x 1,5 PG 42 5042 58 9,5 31,5 6604750 6604689 5M 63 x 1,5 PG 42 6342 65 10,5 32,5 6604752 6604692 1M 63 x 1,5 PG 48 6348 65 10,5 32,5 6604763 6604694 1M 75 x 1,5 PG 48 7548 80 11,5 34,5 6604764 6604695 1

metrisch metrischmetric metricM 12 x 1,5 M 12 x 1,5 14 5 15 6604770 100M 16 x 1,5 M 16 x 1,5 18 6 17 6604771 50M 20 x 1,5 M 20 x 1,5 22 6 18 6604772 50M 25 x 1,5 M 25 x 1,5 27 7 19 6604773 50M 32 x 1,5 M 32 x 1,5 34 7 19 6604774 20M 40 x 1,5 M 40 x 1,5 42 8 25 6604775 10M 50 x 1,5 M 50 x 1,5 52 9 28 6604776 5M 63 x 1,5 M 63 x 1,5 65 9 30 6604777 1

Zwischenstutzenals Übergang von metrischem- auf PG-, bzw. metrischem GewindeMessing vernickelt

Metrisch ❖ PG/Metrisch / Metric ❖ PG/Metric

Material:nickel-plated brassCharacteristics:• metric external thread• PG, resp. metric internal thread• hexagon

163

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 166: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type SW Gewinde- Gesamt- Art.-Nr. Art.-Nr. VEgewinde gewinde mm länge länge ohne mit O-Ring Stck.

mm mm O-RingExternal Internal Type SW Thread Complete Art. no. Art. no. PUthread thread mm length length without with O-ring pcs.

mm mm O-ring

Material:Messing vernickeltKennzeichen:• metrisches Aussengewinde• PG-Innengewinde• 6-kant

Intermediate Partas adapter between metric-and PG-threadnickel-plated brass

MS

metrisch PG metric PGM 16 PG 7 1607 18 7 10,5 6604713 6604659 100M 20 PG 9 2009 22 7 11 6604719 6604665 50M 25 PG 9 2509 27 8 12 6604707 6604670 50M 25 PG 11 2511 27 8 12 6604723 6604671 50M 25 PG 13 2513 27 8 12 6604724 6604673 50M 32 PG 13 3213 34 8,5 12,5 6604706 6604677 20M 32 PG 16 3216 34 8,5 12,5 6604728 6604679 20M 32 PG 21 3221 34 8,5 12,5 6604730 6604680 20M 40 PG 16 4016 42 8,5 13,5 6604705 6604682 10M 40 PG 21 4021 42 8,5 13,5 6604733 6604683 10M 40 PG 29 4029 42 8,5 13,5 6604735 6604684 20M 50 PG 21 5021 52 9,5 15,5 6604704 6604686 10M 50 PG 29 5029 52 9,5 15,5 6604741 6604687 10M 50 PG 36 5036 52 9,5 15,5 6604743 6604688 10M 63 PG 29 6329 65 10,5 17,5 6604703 6604690 5M 63 PG 36 6336 65 10,5 17,5 6604751 6604691 5M 63 PG 42 6342 65 10,5 17,5 6604753 6604693 5

Zwischenstutzenals Übergang von metrischemauf PG-GewindeMessing vernickelt

Metrisch ❖ PG / Metric ❖ PG

Material:nickel-plated brassCharacteristics:• metric external thread• PG internal thread• hexagon

164

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 167: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type SW Gewinde- Gesamt- Art.-Nr. VEgewinde gewinde mm länge länge Stck.

mm mmExternal Internal Type SW Thread Complete Art. no. PUthread thread mm length length pcs.

mm mm

Material:Messing vernickeltKennzeichen:• PG-Aussengewinde• NPT-Innengewinde• 6-kant

Intermediate Partas adapter between PG- and NPT-threadnickel-plated brass

MS

PG NPT PG NPTForm 1 / Form 1PG 29 NPT 1" 629100 40 8 18 6400409 20PG 36 NPT 1 1/4" 636114 50 9 18,5 6400411 10PG 42 NPT 1 1/2" 642112 60 10 19,5 6400413 5PG 48 NPT 1 1/2" 648112 64 10 19,5 6400414 5

Form 2 / Form 2PG 7 NPT 3/8" 600738 19 5 19,5 6400400 50PG 9 NPT 1/2" 600912 24 6 24 6400401 50PG 11 NPT 1/2" 601112 24 6 24 6400402 50PG 13,5 NPT 1/2" 613512 24 6,5 24,5 6400403 50PG 13,5 NPT 3/4" 613534 30 6,5 25 6400404 50PG 16 NPT 1/2" 601612 24 6,5 24,5 6400405 50PG 16 NPT 3/4" 601634 30 6,5 25 6400406 50PG 21 NPT 3/4" 602134 30 7 23 6400407 20PG 21 NPT 1" 621100 36 7 30 6400408 20PG 29 NPT 1 1/4" 629114 50 8 32 6400410 20PG 36 NPT 1 1/2" 636112 55 9 34 6400412 10PG 48 NPT 2" 648200 64 10 35 6400415 5

Zwischenstutzenals Übergang von PG- auf NPT-GewindeMessing vernickelt

Material:nickel-plated brassCharacteristics:• PG external thread• NPT internal thread• hexagon

165

Ergä

nzun

gste

ileIn

tegr

al P

arts

PG ❖ NPT / PG ❖ NPT

Page 168: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Zwischenstutzenals Übergang vonNPT- auf PG-GewindeMessing vernickelt

Material:Messing vernickeltKennzeichen:• NPT-Aussengewinde• PG-Innengewinde• 6-kant

MS

Intermediate Partas adapter betweenNPT- and PG-threadnickel-plated brass

Material:nickel-plated brassCharacteristics:• NPT external thread• PG internal thread• hexagon

166

NPT ❖ PG / NPT ❖ PGAussen- Innen- Type SW Gewinde- Gesamt- Art.-Nr. VEgewinde gewinde mm länge länge Stck.

mm mmOuter Inner Type SW Thread Complete Art. no. PUthread thread mm length length pcs.

mm mm

NPT PG NPT PG3/8" PG 7 538007 19 15 20 6402020 501/2" PG 9 512009 22 20 25 6402038 501/2" PG 11 512011 22 20 28 6402046 501/2" PG 13,5 512135 24 20 30 6402054 501/2" PG 16 512016 24 20 30 6402055 503/4" PG 11 534011 29 20 30 6402060 503/4" PG 13,5 534135 29 20 30 6402062 503/4" PG 16 534016 29 20 30 6402070 503/4" PG 21 534021 32 20 32 6402072 501" PG 16 510016 36 25 35 6402087 501" PG 21 510021 36 25 35 6402089 201" PG 29 510029 42 25 38 6402091 201 1/4" PG 29 511429 46 25 35 6402097 201 1/4" PG 36 511436 50 25 42 6402099 101 1/2" PG 36 511236 52 26 42 6402100 101 1/2" PG 48 511248 65 26 49 6402102 52" PG 48 520048 65 27 50 6402119 5

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 169: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type Durch- Gewinde- Gesamt- Art.-Nr. VEgewinde gewinde messer länge länge Stck.

mm mm mmExternal Internal Type SW Thread Complete Art. no. PUthread thread mm length length pcs.

mm mm

Material:Messing vernickeltKennzeichen:• PG-Aussengewinde• Gas-Innengewinde• Form 1: 6-kant• Form 2: rund

Intermediate Partas adapter between PG- and gas threadnickel-plated brass

MS

PG Gas PG GasForm 1/DIN 259PG 29 R 1" 129001 39 10 16 6400108 20PG 36 R 1 1/4" 136114 50 10 19 6400124 10PG 42 R 1 1/2" 142112 60 12 21 6400140 5

Form 2/DIN 40 430PG 9 R 3/8" 200938 19 7 18 6400019 50PG 9 R 1/2" 200912 24 7 20 6400027 50PG 11 R 3/8" 201138 20 7 18 6400035 50PG 11 R 1/2" 201112 24 7 20 6400043 50PG 13,5 R 1/2" 213512 24 8 22 6400051 50PG 16 R 1/2" 201612 24 8 22 6400060 50PG 16 R 3/4" 201634 30 8 24 6400078 50PG 21 R 3/4" 202134 30 10 26 6400086 20PG 21 R 1" 221001 38 10 32 6400094 20PG 29 R 1 1/4" 229114 45 10 35 6400116 20PG 36 R 1 1/2" 236112 50 10 34 6400132 10PG 48 R 2" 248002 64 12 40 6400175 5

Zwischenstutzenals Übergang von PG- auf Gas-Gewinde Messing vernickelt

Material:nickel-plated brassCharacteristics:• PG external thread• gas internal thread• Form 1: hexagon• Form 2: round

167

PG ❖ Gas / PG ❖ Gas

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 170: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Innen- Type Durch- Gewinde- Gesamt- Art.-Nr. VEgewinde gewinde messer/SW länge länge Stck.

mm mm mmExternal Internal Type Diameter/ Thread Complete Art. no. PUthread thread SW length length pcs.

mm mm mm

Material:Messing vernickeltKennzeichen:• Gas-Aussengewinde• PG-Innengewinde• Form 3: 6-kant• Form 4: rund

Intermediate partas adapter between gas-and PG-threadnickel-plated brass

MS

Gas PG Gas PGForm 3/DIN 259R 1/2" PG 9 312009 22 10 13 6400191 50R 3/4" PG 16 334016 28 12 16 6400248 50R 1" PG 21 310021 36 15 20 6400264 20

Form 4/DIN 40 430R 1/4" PG 7 414007 14 8 20 6400180 50R 1/4" PG 9 414009 17 8 20 6400182 50R 3/8" PG 9 438009 17 8 20 6400183 50R 3/8" PG 11 438011 20 8 19 6400205 50R 3/8" PG 13,5 438135 22 8 20 6400210 50R 3/8" PG 16 438016 24 8 20 6400228 50R 1/2" PG 11 412011 22 10 21 6400213 50R 1/2" PG 13,5 412135 22 10 22 6400221 50R 1/2" PG 16 412016 24 10 22 6400230 50R 3/4" PG 21 434021 30 12 27 6400256 20R 1" PG 29 410029 39 15 30 6400272 20R 1 1/4" PG 29 411429 43 17 32 6400280 20R 1 1/4" PG 36 411436 50 17 32 6400299 10R 1 1/2" PG 36 411236 50 17 32 6400302 10R 1 1/2" PG 42 411242 58 17 34 6400310 5R 2" PG 48 420048 64 20 37 6400345 5

Zwischenstutzenals Übergang von Gas- auf PG-Gewinde Messing vernickelt

Material:nickel-plated brassCharacteristics:• gas external thread• PG internal thread• Form 3: hexagonal• Form 4: round

168

Gas ❖ PG / Gas ❖ PG

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 171: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussengewinde Innengewinde Type SW Gewindelänge Gesamtlänge Art.-Nr. VEmm mm mm Stck.

Outer thread Inner thread Type SW Thread length Complete length Art. no. PUmm mm mm pcs.

Zwischenstutzenals Übergang vonGas- auf PG-GewindeMessing vernickelt

Material:Messing vernickeltKennzeichen:• Gas-Aussengewinde• PG-Innengewinde• 6-kant

Gas PG Gas PGR 1/4" PG 7 714007 14 5 15 6400350 50R 1/4" PG 9 714009 17 5 15,5 6400351 50R 3/8" PG 9 738009 17 6 16,5 6400352 50R 3/8" PG 11 738011 20 6 17 6400353 50R 3/8" PG 13,5 738135 22 6 18,5 6400354 50R 3/8" PG 16 738016 24 6 19,5 6400355 50R 1/2" PG 9 712009 22 6,5 17 6400356 50R 1/2" PG 11 712011 22 6,5 17,5 6400357 50R 1/2" PG 13,5 712135 22 6,5 19 6400358 50R 1/2" PG 16 712016 24 6,5 20 6400359 50R 5/8" PG 13,5 758013 24 6,5 19 6400360 50R 5/8" PG 16 758016 24 6,5 20 6400361 50R 3/4" PG 16 734016 28 7 20,5 6400362 50R 3/4" PG 21 734021 30 7 22 6400363 20R 1" PG 21 701021 36 7,5 22,5 6400364 20R 1" PG 29 701029 40 7,5 24 6400365 20R 1 1/4" PG 29 714029 46 8,5 25 6400366 20R 1 1/4" PG 36 714036 50 8,5 27,5 6400367 10R 1 1/2" PG 36 712036 50 9 28 6400368 10R 1 1/2" PG 42 712042 57 9 30,5 6400369 5R 2" PG 48 702048 64 10 32,5 6400370 5

MS

Intermediate Partas adapter betweengas- and PG-threadnickel-plated brass

Material:nickel-plated brassCharacteristics:• gas external thread• PG internal thread• hexagon

169

Gas ❖ PG / Gas ❖ PG

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 172: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type SW Gewinde- Gesamt- Art.-Nr. VEgewinde mm länge länge Stck.

mm mmExternal Type SW Thread Complete Art. no. PUthread mm length length pcs.

mm mm

Material:Polycarbonat lichtgrauKennzeichen:• PG-Gewinde

Pressure ScrewPolycarbonate

PC

PGPGPG 7 CH 7 M* 13 7,5 11,5 7003072 100PG 9 CH 9 M* 17 8 12 7003099 100PG 11 CH 11 M* 19 9 13 7003110 100PG 13 CH 13 M* 22 9,5 14 7003137 100PG 16 CH 16 M* 24 9,5 14 7003161 100PG 21 CH 21 M* 30 15 20 7003218 50PG 29 CH 29 M* 41 13,5 18,5 7003293 20PG 36 CH 36 M 50 17 22,5 7003366 20PG 42 CH 42 M 55 18,5 24,5 7003420 10PG 48 CH 48 M 60 16 22 7003480 10

*Druckscheibe an Druckschraube angespritzt

DruckschraubenPolycarbonat

135°–

-40°

PG-Gewinde / PG-thread

Material:Polycarbonate light greyCharacteristics:• PG-thread

*Pressure disc moulded to pressure screw

170

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 173: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type SW Gewinde- Gesamt- Art.-Nr. VEgewinde mm länge länge Stck.

mm mmExternal Type SW Thread Complete Art. no. PUthread mm length length pcs.

mm mm

Material:Polystyrol, grauKennzeichen:• PG-Gewinde

Pressure Screwimpact resistant Polystyrene

PS

PGPGPG 7 0807 Pg 13 8,5 13,5 7205074 lose/loosePG 9 0809 Pg 16 8,5 13,5 7205090 lose/loosePG 11 0811 Pg 19 10 15 7205112 lose/loosePG 13,5 0813 Pg 21 10,5 15,5 7205139 lose/loosePG 16 0816 Pg 23 11,5 17,5 7205163 lose/loosePG 21 0821 Pg 30 13,5 19,5 7205210 lose/loosePG 36 0836 Pg 50 17 25 7205368 lose/loosePG 48 0848 Pg 60 18,5 27,5 7205481 lose/loose

Druckschraubenaus schlagfestem Polystyrol

70°–

-20°

PG-Gewinde / PG-thread

Material:Polystyrene, greyCharacteristics:• PG-thread

171

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 174: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type Innendurch- SW Gewinde- Gesamt- Art.-Nr. VEgewinde messer mm länge länge Stck.

mm mm mmExternal Type Internal SW Thread Complete Art. no. PUthread diameter mm length length pcs.

mm mm mm

Material:Polyamid, grauKennzeichen:• PG-Gewinde• mit Zugentlastung

Pressure ScrewType KZVPolyamide

Anwendungsbereiche:• Industriebetriebe, die Vollisolation

verlangen• chemische Industrie

PA

PGPGPG 9 KZV 9 11 19 8,5 23 5400090 1PG 11 KZV 11 13,5 21 9 25 5400112 1PG 13,5 KZV 13,5 14,5 23 10 27,5 5400139 1PG 16 KZV 16 16,5 25 10 29 5400163 1PG 21 KZV 21 22 32 13,5 37 5400210 1PG 29 KZV 29 29,5 42 17 47 5400295 1

DruckschraubenType KZVPolyamid

100°–

-30°

PG-Gewinde / PG-thread

Material:Polyamide, greyCharacteristics:• PG-thread• with traction relief

Applications:• industrial plants requiring complete

insulation• chemical industry

172

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 175: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type Innendurch- SW Gewinde- Gesamt- Art.-Nr. VEgewinde messer mm länge länge Stck.

mm mm mmExternal Type Internal SW Thread Complete Art. no. PUthread diameter mm length length pcs.

mm mm mm

Material:Messing vernickeltKennzeichen:• PG-/Metrisches Gewinde

Pressure Screwfor cable glandsaccording to DIN 46 320nickel-plated brass

MS

PG / PGPG 7 7/1 10,0 13 5,5 8,5 6600077 100PG 9 9/1 12,5 15 6 9 6600093 100PG 11 11/1 15,0 18 6 9 6600115 100PG 13,5 13/5/1 17,0 20 7,5 10,5 6600131 100PG 16 16/1 18,5 22 7,5 10,5 6600166 100PG 21 21/1 24,0 28 8 11,5 6600212 100PG 29 29/1 32,0 37 8 12 6600298 50PG 36 36/1 42,0 47 9,5 14 6600360 50PG 42 42/1 48,0 54 10 16 6600425 10PG 48 48/1 52,5 60 11,5 17,5 6600484 5

metrisch / metricM 12 x 1,5 8,5 13 5 8 6600800 100M 16 x 1,5 12,5 16 6 9 6600801 50M 20 x 1,5 16 20 7 10 6600802 50M 25 x 1,5 21 25 7 10 6600803 50M 32 x 1,5 28 32 7 10 6600804 20M 40 x 1,5 35 40 10 14 6600805 10M 50 x 1,5 45 50 10 14 6600806 5M 63 x 1,5 57 64 14,5 18,5 6600807 1

Druckschraubenfür Kabelverschraubungennach DIN 46 320Messing vernickelt

PG-/Metrisches Gewinde / PG-/Metric thread

Material:nickel-plated brassCharacteristics:• PG-/metric-thread

173

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 176: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type SW Gewinde- Gesamt- Klemm- Art.-Nr. VEgewinde mm länge länge bereich Stck.

mm mm mmExternal Type SW Thread Complete Clamping Art. no. PUthread mm length length range pcs.

mm mm mm

Material:Messing vernickeltKennzeichen:• PG-/metrisches Gewinde

Pressure Screwwith center-functioningtraction reliefnickel-plated brass

Eigenschaften:• sehr großer Klemmbereich

der Backen• Biegeschutz

MS

PG / PGPG 7 ZD 7 16 5,5 16 5,5 - 7,5 4304071 100PG 9 ZD 9 19 8 19 6,5 - 9,5 4304098 50PG 11 ZD 11 22 8 19 7,5 - 11,5 4304110 50PG 13,5 ZD 13 24 6,5 18 8,5 - 13,5 4304136 50PG 16 ZD 16 27 10,5 22,5 10,5 - 16,5 4304160 25PG 21 ZD 21 33 10 24 12 - 20,5 4304217 25PG 29 ZD 29 42 10 24 19 - 29,5 4304292 10PG 36 ZD 36 52 9,5 26 24 - 36,5 4304365 10PG 42 ZD 42 60 10 26,5 33 - 42,5 4304420 5PG 48 ZD 48 64 11 27,5 36 - 47,5 4304489 5

metrisch / metricM12 x 1,5 ZD M12 16 5,5 16 5,5 - 7,5 4304512 100M16 x 1,5/9 ZD M16/9 19 8 19 6,5 - 9,5 4304516 50M16 x 1,5/11 ZD M16/11 22 8 19 7,5 - 11,5 4304517 50M20 x 1,5/13 ZD M20/13 24 6,5 18 8,5 - 13,5 4304520 50M20 x 1,5/16 ZD M20/16 27 10,5 22,5 9,5 - 15,5 4304521 25M25 x 1,5 ZD M25 33 10 24 12 - 20,5 4304525 25M32 x 1,5 ZD M32 42 10 24 18 - 27,5 4304532 10

Druckschraubenmit zentrisch wirkenderZugentlastungMessing vernickelt

Material:nickel-plated brassCharacteristics:• PG-/metric thread

Features:• very wide clamping range• bending protection

174

Ergä

nzun

gste

ileIn

tegr

al P

arts

PG-/Metrisches Gewinde / PG-/Metric thread

Page 177: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type SW Gewinde- Gesamt- Klemm- Art.-Nr. VEgewinde mm länge länge bereich Stck.

mm mm mmExternal Type SW Thread Complete Clamping Art. no. PUthread mm length length range pcs.

mm mm mm

Material:Messing vernickeltKennzeichen:• PG-/metrisches Gewinde

Pressure Screwwith traction reliefand bending protectionnickel-plated brass

Eigenschaften:• sehr großer Klemmbereich• Biegeschutz

MSSchutzart

IP 20

PG / PGPG 9 DZB 9 22 6 20 6 - 9 4306090 100PG 11 DZB 11 24 6 21 8 - 11,5 4306112 100PG 13,5 DZB 13 28 6,5 22 9 - 13 4306139 50PG 16 DZB 16 30 6,5 23 10 - 15 4306163 50PG 21 DZB 21 38 7 25 14 - 20 4306210 50PG 29 DZB 29 50 8,5 27 19 - 30 4306295 50

metrisch / metricM16 x 1,5/9 DZB M16/9 22 6 20 6 - 9 4306316 100M16 x 1,5/11 DZB M16/11 24 6 21 8 - 11,5 4306317 100M20 x 1,5/13 DZB M20/13 28 6,5 22 9 - 13 4306320 50M20 x 1,5/16 DZB M20/16 30 6,5 23 10 - 15 4306321 50M25 x 1,5 DZB M25 38 7 25 14 - 20 4306325 50M32 x 1,5 DZB M32 50 8,5 27 17 - 28 4306332 50

Druckschraubenmit Zugentlastung und BiegeschutzMessing vernickelt

Material:nickel-plated brassCharacteristics:• PG-/metric thread

Features:• very wide clamping range• bending protection

175

Ergä

nzun

gste

ileIn

tegr

al P

arts

PG-/Metrisches Gewinde / PG-/Metric thread

Page 178: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type SW Gewinde- Gesamt- Klemm- Art.-Nr. VEgewinde mm länge lämge bereich Stck.

mm mm mmExternal Type SW Thread Complete Clamping Art. no. PUthread mm length length range pcs.

mm mm mm

Material:Messing vernickeltKennzeichen:• PG-/metrisches Gewinde

Pressure Screwwith traction reliefnickel-plated brass

MS IP 20

PG / PGPG 7 ZED 607 17 5,5 19 6 - 9,5 4307003 100PG 9 ZED 609 17 5,5 19 6 - 9,5 4307011 100PG 11 ZED 710 20 6,5 20 7 - 11,5 4307020 100PG 13,5 ZED 1014 22 6,5 20,5 9 - 13 4307038 50PG 16 ZED 1015 24 6,5 20,5 10 - 15 4307046 50PG 21 ZED 1418 30 7,5 21,5 13 - 20 4307054 50PG 29 ZED 2027 40 8,5 24 20 - 29 4307062 50

metrisch / metricM12 x 1,5 ZED M12 17 7 20,5 6 - 9,5 4307612 50M16 x 1,5/9 ZED M16/9 17 7 20,5 6 - 9,5 4307616 50M16 x 1,5/11 ZED M16/11 20 7 20,5 7 - 11,5 4307617 50M20 x 1,5/13 ZED M20/13 22 7 21 9 - 13 4307620 50M20 x 1,5/16 ZED M20/16 24 7 21 10 - 15 4307621 50M25 x 1,5 ZED M25 30 8 22 13 - 20 4307625 20M32 x 1,5 ZED M32 40 8,5 24 19 - 27 4307632 20

Druckschraubenmit Zugentlastung Messing vernickelt

Material:nickel-plated brassCharacteristics:• PG-/metric thread

176

Ergä

nzun

gste

ileIn

tegr

al P

arts

PG-/Metrisches Gewinde / PG-/Metric thread

Page 179: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type SW Gewinde- Gesamt- Art.-Nr. VEgewinde mm länge länge Stck.

mm mmExternal Type SW Thread Complete Art. no. PUthread mm length length pcs.

mm mm

Material:PolycarbonatKennzeichen:• PG-Gewinde• 6-kant, mit Schlitz

PlugshexagonPolycarbonate

PC

PGPGPG 7 BOU 7M 15 6,5 10 7002076 50PG 9 BOU 9M 19 7 10,5 7002092 50PG 11 BOU 11M 22 8 11,5 7002114 100PG 13 BOU 13M 24 9 12,5 7002130 50PG 16 BOU 16M 27 9 12,5 7002165 50PG 21 BOU 21M 32 10 14,5 7002211 20PG 29 BOU 29M 41 12 18 7002297 25PG 36 BOU 36M 55 14 21,5 7002360 10PG 42 BOU 42M 60 15,5 24,5 7002424 1PG 48 BOU 48M 65 16 26 7002483 1

Blindstopfen6-kantPolycarbonat

135°–

-40°

Material:PolycarbonateCharacteristics:• PG-thread• hexagon, with slot

177

Ergä

nzun

gste

ileIn

tegr

al P

arts

PG-Gewinde / PG-thread

Page 180: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type Durch- Gewinde- Gesamt- Art.-Nr. Art.-Nr. Art.-Nr. VEgewinde messer länge länge RAL 7035 RAL 7001 RAL 9005 Stck.

mm mm mm lichtgrau silbergrau tiefschwarzExternal Type Diameter Thread Complete Art. no. Art. no. Art. no. PUthread mm length length RAL 7035 RAL 7001 RAL 9005 pcs.

mm mm light grey silver grey jet black

Material:PolystyrolKennzeichen:• PG/metrisches Gewinde• rund, mit Schlitz

Plugsroundimpact resistant Polystyrene

PS

PG / PGPG 7 1007 Pg 15 6 8 7215070 100PG 9 1009 Pg 19 6 9 7215096 100PG 11 1011 Pg 22 6 9 7215118 100PG 13,5 1013 Pg 25 6 9,5 7215134 100PG 16 1016 Pg 27 6 9,5 7215169 100PG 21 1021 Pg 33 8 11 7215215 100PG 29 1029 Pg 44 8 12 7215290 100PG 36 1036 Pg 55 10 15 7215363 50PG 42 1042 Pg 62 10 16 7215428 50PG 48 1048 Pg 69 12 18,5 7215487 50

metrisch / metricM 12 x 1,5 16 6 8 7217012 7217112 7217212 50M 16 x 1,5 20 6 8 7217016 7217116 7217216 50M 20 x 1,5 26 8 10,5 7217020 7217120 7217220 50M 25 x 1,5 32 8 11 7217025 7217125 7217225 20M 32 x 1,5 40 10 13,5 7217032 7217132 7217232 20M 40 x 1,5 48 10 14 7217040 7217140 7217240 20M 50 x 1,5 55 12 17 7217050 7217150 7217250 10M 63 x 1,5 70 12 18 7217063 7217163 7217263 5

Blindstopfenrundaus schlagfestem Polystyrol

70°–

-20°

Material:PolystyreneCharacteristics:• PG/metric thread• round, with slot

178

Ergä

nzun

gste

ileIn

tegr

al P

arts

PG-/Metrisches Gewinde / PG-/Metric thread

Page 181: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type Durch- Gewinde- Gesamt- Art.-Nr. Art.-Nr. Art.-Nr. VEgewinde messer länge länge lichtgrau silbergrau tiefschwarz Stck.

mm mm mm RAL 7035 RAL 7001 RAL 9005External Type Diameter Thread Complete Art. no. Art. no. Art. no. PUthread mm length length light grey silver grey jet black pcs.

mm mm RAL 7035 RAL 7001 RAL 9005

Material:Polyamid,25 % glasfaserverstärktKennzeichen:• PG/metrisches Gewinde• rund

PlugsroundPolyamide

PAGFK

PG / PGPG 7 1007 GFK 15 6 7215517 100PG 9 1009 GFK 19 6 7215525 100PG 11 1011 GFK 22 6 7215533 100PG 13,5 1013 GFK 25 6 7215541 100PG 16 1016 GFK 27 6 7215550 100PG 21 1021 GFK 33 8 7215568 100PG 29 1029 GFK 44 8 7215576 100PG 36 1036 GFK 55 10 7215584 50PG 42 1042 GFK 62 10 7215592 50PG 48 1048 GFK 69 12 7215606 50

metrisch / metricM 12 x 1,5 16 6 8 7217312 7217412 7217512 50M 16 x 1,5 20 6 8 7217316 7217416 7217516 50M 20 x 1,5 26 8 10,5 7217320 7217420 7217520 50M 25 x 1,5 32 8 11 7217325 7217425 7217525 20M 32 x 1,5 40 10 13,5 7217332 7217432 7217532 20M 40 x 1,5 48 10 14 7217340 7217440 7217540 20M 50 x 1,5 55 12 17 7217350 7217450 7217550 10M 63 x 1,5 70 12 18 7217363 7217463 7217563 5

BlindstopfenrundPolyamid

120°–

-30°

Material:Polyamide25 % glassfiber reinforcedCharacteristics:• PG/metric thread• round

179

Ergä

nzun

gste

ileIn

tegr

al P

arts

PG-/Metrisches Gewinde / PG-/Metric thread

Page 182: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type SW Gewinde- Gesamt- Art.-Nr. Art.-Nr. VEgewinde mm länge länge ohne mit mont. Stck.

mm mm O-Ring O-RingExternal Type SW Thread Complete Art. no. Art. no. PUthread mm length length without with O-ring pcs.

mm mm O-ring

Material:Messing vernickeltO-Ring: NitrilKennzeichen:• PG-/metrisches Gewinde• 6-kant, mit Schlitz

Plugshexagonnickel-plated brass

MSIP 68

mit O-Ring

PG / PGPG 7 4607 14 5 8 6702507 50PG 9 4609 17 6 9 6702509 50PG 11 4611 19 6 9 6702511 50PG 13,5 4613 21 6,5 9,5 6702513 50PG 16 4616 23 6,5 9,5 6702516 25PG 21 4621 29 7 11 6702521 20PG 29 4629 39 8 12 6702529 15PG 36* 4636 50 9 14 6702536 10PG 42* 4642 58 10 15 6702542 10PG 48* 4648 64 10 16 6702548 10

metrisch / metricM 12 x 1,5 14 7 10 6702712 6702812 50M 16 x 1,5 17 7 10 6702716 6702816 50M 20 x 1,5 23 7 10 6702720 6702820 50M 25 x 1,5 29 8 11,5 6702725 6702825 20M 32 x 1,5 39 8,5 12,5 6702732 6702832 20M 40 x 1,5 45 8,5 12,5 6702740 6702840 20M 50 x 1,5 58 9,5 14,5 6702750 6702850 10M 63 x 1,5 70 10,5 17,5 6702763 6702863 5

*) PG 36 - PG 48 ohne Schlitz

Blindstopfen6-kantMessing vernickelt

120°–

-25°

Material:nickel-plated brassO-ring, NitrilCharacteristics:• PG-/metric thread• hexagon, with slot

*) PG 36 - PG 48 without slot

180

Ergä

nzun

gste

ileIn

tegr

al P

arts

PG-/Metrisches Gewinde / PG-/Metric thread

Page 183: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type Durch- Gewinde- Gesamt- Art.-Nr. VEgewinde messer länge länge Stck.

mm mm mmExternal Type Diameter Thread Complete Art. no. PUthread mm length length pcs.

mm mm

Material:Messing, vernickeltKennzeichen:• PG-/metrisches, Gas-Gewinde• rund, mit Schlitz

Plugsnickel-plated brassround

MS

PG / PGPG 7 7006 14 5 8 6700071 50PG 9 9006 17 6 9 6700098 50PG 11 1106 20 6 9 6700110 50PG 13,5 1356 22 6,5 9,5 6700136 50PG 16 1606 24 6,5 9,5 6700160 25PG 21 2106 30 7 11 6700217 20PG 29 2906 39 8 12 6700292 15PG 36 3606 50 9 15 6700365 10PG 42 4206 57 10 16 6700420 10PG 48 4806 64 10 16 6700489 10

metrisch / metricM 12 x 1,5 1236 14 5 8 6701612 100M 16 x 1,5 1636 18 6 9 6701616 100M 20 x 1,5 2036 22 6,5 9,5 6701620 100M 25 x 1,5 2536 27 7 11 6701625 50M 32 x 1,5 3236 34 8 12 6701632 50M 40 x 1,5 4036 44 9 14 6701640 50M 50 x 1,5 5036 54 10 15,5 6701650 25M 63 x 1,5 6336 67 10 16 6701663 25

Gas / gasR 3/8" 3806 17 6 9 6701388 50R 1/2" 1206 22 6,5 9,5 6701124 50R 5/8" 5806 24 6,5 9,5 6701582 25R 3/4" 3406 28 7 10 6701345 10R 1" 1006 35 8 12 6701108 10R 1 1/4" 1146 44 8,5 13 6701140 10R 1 1/2" 1126 50 9 15 6701116 10R 2" 2006 64 10 16 6701205 10

BlindstopfenMessing vernickeltrund

135°–

-40°

Material:nickel-plated brassCharacteristics:• PG-/metric, Gas-thread• round, with slot

181

Ergä

nzun

gste

ileIn

tegr

al P

arts

PG-, Metrisches, Gas-Gewinde / PG-, Metric, Gas-thread

Page 184: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Aussen- Type Durch- Gewinde- Gesamt- Art.-Nr. VEgewinde messer länge länge Stck.

mm mm mmExternal Type Diameter Thread Complete Art. no. PUthread mm length length pcs.

mm mm

Material:• Messing, vernickelt• O-Ring: NitrilKennzeichen:• PG/metrisches Gewinde• rund, mit Schlitz

Plugswith pre-mounted O-ringnickel-plated brassround

MS IP 68

PG / PGPG 7 7006 Hi 14 5 8 6700507 50PG 9 9006 Hi 17 6 9 6700509 50PG 11 1106 Hi 20 6 9 6700511 50PG 13,5 1356 Hi 22 6,5 9,5 6700513 50PG 16 1606 Hi 24 6,5 9,5 6700516 25PG 21 2106 Hi 30 7 11 6700521 20PG 29 2906 Hi 39 8 12 6700529 15PG 36 3606 Hi 50 9 15 6700536 10PG 42 4206 Hi 57 10 16 6700542 10PG 48 4806 Hi 64 10 16 6700548 10

metrisch / metricM 12 x 1,5 1206 Hi 14 5 8 6700612 100M 16 x 1,5 1606 Hi 18 6 9 6700616 100M 20 x 1,5 2006 Hi 22 6,5 9,5 6700620 100M 25 x 1,5 2556 Hi 27 7 11 6700625 100M 32 x 1,5 3206 Hi 34 8 12 6700632 50M 40 x 1,5 4006 Hi 44 9 14 6700640 50M 50 x 1,5 5006 Hi 54 10 15,5 6700650 25M 63 x 1,5 6306 Hi 67 10 16 6700663 25

Blindstopfenmit montiertem O-RingMessing vernickeltrund

Material:• nickel-plated brass• O-ring: NitrilCharacteristics:• PG/metric thread• round, with slot

182

Ergä

nzun

gste

ileIn

tegr

al P

arts

PG-/Metrisches Gewinde / PG-/Metric thread

Page 185: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Flange angle 90°Polyamide

Material:Polyamide PA 6Characteristics:• PG/metric thread

Anschluss- Type B C D E G Höhe Art.-Nr. VEgewinde mm mm mm mm mm mm Stck.Connecting Type B C D E G Height Art. no. PUthread mm mm mm mm mm mm pcs.

Flanschwinkel 90°Polyamid

Material:Polyamid PA 6Kennzeichen:• PG/metrisches Gewinde

PG / PGPG 9 FWK 9 9 50 45 37 4,3 29 7302096 10PG 11 FWK 11 9 50 45 37 4,3 29 7302118 10PG 13,5 FWK 13 10 56 53 44 5,5 35 7302134 10PG 16 FWK 16 10 56 53 44 5,5 35 7302169 10PG 21 FWK 21 11 68 68 55,5 5,5 43 7302215 5PG 29 FWK 29 11 74 70 60 5,5 52 7302290 5PG 36 FWK 36 13 93 88 72 6,5 68 7302363 2

metrisch / metricM 25 x 1,5 68 68 55 43 7302425 5

183

PA 6 IP 65

PG-/Metrisches Gewinde / PG-/Metric thread

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 186: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Flange angle 90°die cast

Material:Made of Zinc, die castCharacteristics:• PG/metric thread

Anschluss- Type B C D E G Höhe Art.-Nr. VEgewinde mm mm mm mm mm mm Stck.Connecting Type B C D E G Height Art. no. PUthread mm mm mm mm mm mm pcs.

Flanschwinkel 90°Druckguss

Material:ZinkdruckgussKennzeichen:• PG/metrisches Gewinde

PG / PGPG 9 9 FLW 10 50 45 37 4,3 6303099 10PG 11 11 FLW 10 50 45 37 4,3 6303110 10PG 13,5 13 FLW 10 56 53 44 5,5 6303137 10PG 16 16 FLW 10 56 53 44 5,5 6303161 10PG 21 21 FLW 11 65 63 54 5,5 6303218 5PG 29 29 FLW 11 74 70 60 5,5 6303293 5PG 36 36 FLW 18 94 89 72 6,5 6303366 5PG 42 42 FLW 30 114 96 84 6,5 6303420 5PG 48 48 FLW 30 114 96 84 6,5 6303480 1

metrisch / metricM 16 x 1,5 10,5 48 45 37 4,3 30 6303516 10M 20 x 1,5 10,5 58 53 44 5,5 35 6303520 10M 25 x 1,5 11 65 63 54 5,5 42 6303525 5M 32 x 1,5 11 75 71 60 5,5 52 6303532 5M 40 x 1,5 11 75 71 60 5,5 52 6303540 5M 50 x 1,5 18 93 89 72 6,5 69 6303550 5M 63 x 1,5 14 114 96 84 6,5 74 6303563 1

184

Zink IP 65

PG-/Metrisches Gewinde / PG-/Metric thread

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 187: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Elbow 90°with O-ringdie cast

Material:• 1: Elbow: made of Zinc, die cast• 2: O-ring: NitrileCharacteristics:• PG/metric thread

Anschluss- E G C D Art.-Nr. VEgewinde mm mm mm mm Stck.Connecting E G C D Art. no. PUthread mm mm mm mm pcs.

Verschraubungs-winkel 90°mit O-RingDruckguss

Material:• 1: Winkel: Zinkdruckguss• 2: O-Ring: NitrilKennzeichen:• PG/metrisches Gewinde

PG / PGPG 7 6 26 20 6300006 25PG 9 6 25 27 6300014 100PG 11 6 28 30 6300022 50PG 13,5 6,5 30,5 33 6300049 50PG 16 6,5 33,5 36 6300065 50PG 21 7 40 43 6300073 25PG 29 8 52 55 6300081 10PG 36 11 79 68 6300090 5

metrisch / metricM 12 x 1,5 8 8,5 32 25 6300412 50M 16 x 1,5 8 8,5 34,5 27 6300416 50M 20 x 1,5 8 8,5 39 30 6300420 50M 25 x 1,5 8 8,5 42 37 6300425 20M 32 x 1,5 12 8,5 49 41 6300432 20

185

Zink IP 68

PG-/Metrisches Gewinde / PG-/Metric thread

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 188: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

BIMO-connecting sleeve

Material:nickel-plated brass

Anschluss- Type A-Ø L passend für Art.-Nr. VEgewinde mm mm Schlauch Stck.

I-Ø x A-ØConnecting Type A-Ø L fits for Art. no. PUthread mm mm tube pcs.

I-Ø x A-Ø

BIMO- Verbindungsmuffen

Material:Messing vernickelt

MS IP 54

PG 9 20009 17 32 11,5 x 14,6 2101092 25PG 11 20011 20 35 14,4 x 18,0 2101114 25PG 13,5 20135 22 37 16,2 x 19,8 2101130 25PG 16 20016 25 37 18,3 x 21,9 2101165 25PG 21 20021 31 45 24,2 x 27,7 2101211 25PG 29 20029 40 46 32,8 x 36,3 2101297 10PG 36 20036 50 51 42,8 x 46,3 2101360 1PG 42 20042 57 59 48,5 x 53,5 2101424 5PG 48 20048 63 60 53,5 x 58,8 2101483 5

186

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 189: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Twisting sleeve

Material:LDPE smoothCharacteristics:• metric thread• shutted form to bore• hexagon

Gewinde Dichtbereich SW Gewindelänge Gesamtlänge Ø Flansch Art.-Nr. Art.-Nr. VEmm mm mm mm mm lichtgrau tiefschwarz Stck.

RAL 7035 RAL 9005Thread Sealing range SW Thread length Complete length Ø Flange Art. no. Art. no. PU

mm mm mm mm mm light grey jet black pcs.RAL 7035 RAL 9005

Dichtstopfen

Material:LDPE weichKennzeichen:• metrisches Gewinde• geschlossene Form zum Aufbohren• 6-kant

M 12 x 1,5 3,5 - 5 10 8,4 15 15 7006812 7006870 50M 16 x 1,5 5 - 10 15 10 17 20 7006816 7006871 50M 20 x 1,5 8 - 13,5 19 12 20 24 7006820 7006872 50M 25 x 1,5 9 - 16 24 12 22 28 7006825 7006873 50M 32 x 1,5 11 - 22 30 14 25 37 7006832 7006874 25M 40 x 1,5 17 - 24 37 16 28 45 7006840 7006875 20M 50 x 1,5 22 - 35 46 18 31 55,5 7006850 7006876 10M 63 x 1,5 24 - 43 56 20 35 68,5 7006863 7006877 5

187

LDPE IP 54

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 190: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Anschlussgewinde / Connecting thread Innen- Stärke Art.-Nr. VEdurchmesser mm Stck.

PG metrisch Gas mmPG metric gas Internal Thickness Art. no. PU

Diameter mm pcs.mm

Material:PerbunanKennzeichen:• für PG, metrisches und Gas-Gewinde

O-RingsPerbunan

Material:PerbunanCharacteristics:• for PG, metric and gas thread

PG 7 M 12 R 1/4" 11 1,5 8112070 1000PG 9 M 16 R 3/8" 13 1,5 8112096 1000PG 11 15 1,5 8112118 1000PG 13,5 M 20 R 1/2" 18 1,5 8112134 1000PG 16 R 5/8" 19 1,5 8112169 1000PG 21 20,35 1,78 8112215 1000

M 25 R 3/4" 21,98 1,78 8112250 100M 32 R 1" 28 2 8112320 100

PG 29 R 1 1/8" 34 2 8112290 1000M 40 R 1 1/4" 37 2 8112400 100

PG 36 R 1 1/2" 42 2 8112363 1000M 50 R 1 3/4" 48 2 8112500 100

PG 42 48 2,5 8112428 1000PG 48 M 63 R 2" 55 2,5 8112630 1000

M 75 67,95 2,62 8112675 100

O-RingePerbunan

120°–

-25°Perbunan

188

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 191: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Anschluss- Type Durchmesser Durchmesser Stärke Art.-Nr. VEgewinde Aussen Innen mm Stck.

mm mmConnecting Type External Internal Thickness Art. no. PUthread diameter diameter mm pcs.

mm mm

Material:Neopren, schwarzKennzeichen:• für PG und metrisches Gewinde

Flat PackingNeoprene

PG / PGPG 7 17 11,3 1,2 8113301 100PG 9 20 13,9 1,2 8113302 100PG 11 23 17,1 1,2 8113303 100PG 13,5 25 19 1,2 8113304 100PG 16 27 21 1,2 8113305 100PG 21 34 26,6 1,5 8113306 50PG 29 45 35,2 1,5 8113307 50PG 36 56 45,2 1,5 8113308 50PG 42 67 52,2 1,5 8113309 50PG 48 72 57,7 1,5 8113310 50

metrisch / metricM 12 12 F 15 10 1,2 8113490 100M 16 16 F 20 13,9 1,2 8113491 100M 20 20 F 24 18 1,2 8113492 100M 25 25 F 30 23 1,2 8113493 100M 32 32 F 40 30 1,5 8113494 100M 40 40 F 48 38 1,5 8113495 100M 50 50 F 58 48 1,5 8113496 100M 63 63 F 75 61 1,5 8113497 100M 75 75 F 90 73 1,5 8113498 100

FlachdichtungenNeopren

100°–

-25°Neopren

Material:Neoprene, blackCharacteristics:• for PG and metric thread

189

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 192: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Anschlussgewinde / Connecting thread Type Durch- Durch- Höhe Art.-Nr. VEmesser messer mm

PG metrisch Aussen Innenmm mm

PG metric Type External Internal Height Art. no. PUdiameter diameter mmmm mm

Material:NeoprenKennzeichen:• einfach

Sealing Ringsplain

PG 7 M 12 307/5 10,7 5 5 8103011 lose/loosePG 7 M 12 307/6* 10,7 6 5 8103020 lose/loosePG 7 M 12 307/7 10,7 7 5 8103038 lose/loosePG 9 M 16 309/6 13,3 6 5,5 8103054 lose/loosePG 9 M 16 309/7* 13,3 7 5,5 8103062 lose/loosePG 9 M 16 309/8 13,3 8 5,5 8103070 lose/loosePG 9 M 16 309/9 13,3 9 5,5 8103089 lose/loosePG 11 M 16 - M 20 311/5 16,5 5 6 8103097 lose/loosePG 11 M 16 - M 20 311/7 16,5 7 6 8103119 lose/loosePG 11 M 16 - M 20 311/9* 16,5 9 6 8103127 lose/loosePG 11 M 16 - M 20 311/10 16,5 10 6 8103135 lose/loosePG 11 M 16 - M 20 311/11 16,5 11 6 8103143 lose/loosePG 13,5 M 20 - M 25 313/7 18,3 7 6,5 8103151 lose/loosePG 13,5 M 20 - M 25 313/9 18,3 9 6,5 8103160 lose/loosePG 13,5 M 20 - M 25 313/11* 18,3 11 6,5 8103186 lose/loosePG 13,5 M 20 - M 25 313/2 18,3 12 6,5 8103194 lose/loosePG 16 M 20 - M 25 316/9 20,4 9 7,5 8103208 lose/loosePG 16 M 20 - M 25 316/10 20,4 10 7,5 8103216 lose/loosePG 16 M 20 - M 25 316/13* 20,4 13 7,5 8103232 lose/loosePG 16 M 20 - M 25 316/15 20,4 15 7,5 8103240 lose/loosePG 21 M 25 - M 32 321/14 25,9 14 8 8103259 lose/loosePG 21 M 25 - M 32 321/16* 25,9 16 8 8103356 lose/loosePG 29 M 32 329/23 34,7 23 9,5 8103275 lose/loosePG 29 M 32 329/25* 34,7 25 9,5 8103283 lose/loosePG 36 M 40 336/30 44,7 30 12 8103291 lose/loosePG 36 M 40 336/32* 44,7 32 12 8103305 lose/loosePG 42 M 50 342/40* 51,7 40 14 8103321 lose/loosePG 48 M 63 348/46* 56,9 46 14 8103330 lose/loose

Hinweis: Die mit * gekennzeichneten Typen sind in dieNormalausführungen der Kabelverschraubungen einge-baut.

Dichtringeeinfach

100°–

-25°Neopren

Material:NeopreneCharacteristics:• plain

Note: (*) marked types are assembled within the standard cable glands

190

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 193: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Anschlussgewinde Type Aussen- Abstufungen Höhe Art.-Nr. VEConnecting thread durch- mm mmPG metrisch messer

mmPG metric Type External Grading Height Art. no. PU

diameter mm mmmm

Material:NeoprenKennzeichen:• ausschneidbar

Sealing Ringspunchable

PG 9 M 16 309 UNEO 13,3 5 x 7,5 x 10 5,5 8107092 lose/loosePG 11 M 16 - M 20 311 UNEO 16,5 5 x 7,5 x 10 x 12,5 6 8107114 lose/loosePG 13,5 M 20 - M 25 313 UNEO 18,3 7,5 x 10 x 12,5 6 8107130 lose/loosePG 16 M 20 - M 25 316 UNEO 20,4 7,5 x 10 x 12,5 x 15 7 8107165 lose/loosePG 21 M 25 - M 32 321 UNEO 25,9 10 x 13 x 16 x 19 8 8107211 lose/loosePG 29 M 32 329 UNEO 34,7 18 x 21 x 24 x 27 9,5 8107297 lose/loosePG 36 M 40 336 UNEO 44,7 24 x 27 x 30 x 33 12 8107360 lose/loosePG 42 M 50 342 UNEO 51,7 30 x 33 x 36 x 39 14 8107424 lose/loosePG 48 M 63 348 UNEO 56,9 36 x 39 x 42 x 45 14 8107483 lose/loose

Dichtringeausschneidbar

100°–

-25°Neopren

Material:NeopreneCharacteristics:• punchable

191

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 194: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Anschlussgewinde Type Durch- Durch- Dicke Art.-Nr. VEConnecting thread messer messer mmPG metrisch Aussen Innen

mm mmPG metric Type External Internal Thickness Art. no. PU

diameter diameter mmmm mm

Material:Stahl, verzinkt

Pressure Ringsgalvanized steel

PG 7 M 12 D 307/8 11 8 1 8110026 lose/loosePG 9 M 16 - M 20 D 309/10 13,5 10 1 8110050 lose/loosePG 11 M 16 - M 20 D 311/10 17 10 0,8 8110085 lose/loosePG 11 M 16 - M 20 D 311/12 17 12 1 8110093 lose/loosePG 13,5 M 20 - M 25 D 313/10 18,5 10 0,8 8110107 lose/loosePG 13,5 M 20 - M 25 D 313/14 18,5 14 1 8110115 lose/loosePG 16 M 20 - M 25 D 316/12 20,5 12 0,8 8110123 lose/loosePG 16 M 20 - M 25 D 316/16 21 16 1 8110131 lose/loosePG 21 M 25 - M 32 D 321/21 26 21 1 8110166 lose/loosePG 29 M 32 D 329/30 35 30 1 8110174 lose/loosePG 36 M 40 D 336/38 45 38 1 8110182 lose/loosePG 42 M 50 D 342/43 52 43 1 8110190 lose/loosePG 48 M 63 D 348/48 57 48 1 8110204 lose/loose

DruckringeStahl verzinkt

Stahl

Material:galvanized steel

192

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 195: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Anschluss- Type I-Ø Stärke Art.-Nr. VEgewinde mm mm Stck.Connecting Type I-Ø Thickness Art. no. PUthread mm mm pcs.

Anschlussgewinde-DichtringPolyethylen

Material:Polyethylen

PG / PGPG 7 307 K 12 1,6 8115010 100PG 9 309 K 15 1,6 8115028 100PG 11 311 K 18 1,6 8115036 100PG 13,5 313 K 20 1,8 8115044 100PG 16 316 K 22 1,8 8115052 100PG 21 321 K 28 2,0 8115060 100PG 29 329 K 36 2,2 8115079 100PG 36 336 K 46 3,0 8115087 100PG 42 342 K 53 3,2 8115095 100PG 48 348 K 58 3,4 8115109 100

PE

Packing Ring forconnection threadPolyethylene

Material:Polyethylene

193

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 196: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Anschluss- Type Aussen- Dicke Art.-Nr. VEgewinde durchmesser mm

mmConnecting Type External Thickness Art. no. PUthread diameter mm

mm

Material:• Polyethylen, grau• Polyamid, weiß

Dummy Disc

grau / grey PG / PGPG 7 PR 7 11 3 7006207 lose/loosePG 9 PR 9 13 3 7006209 lose/loosePG 11 PR 11 16,5 3 7006211 lose/loosePG 13 PR 13 18,5 3 7006213 lose/loosePG 16 PR 16 20,5 3 7006216 lose/loosePG 21 PR 21 27 3 7006221 lose/loosePG 29 PR 29 35 3 7006229 lose/loosePG 36 PR 36 45 3 7006236 lose/loosePG 42 PR 42 52 3 7006242 lose/loosePG 48 PR 48 57 3 7006248 lose/loose

weiß / white PG / PGPG 7 BS 7 10,5 7006012 lose/loosePG 9 BS 9 13,5 7006020 lose/loosePG 11 BS 11 16,5 7006039 lose/loosePG 13,5 BS 13 18,5 7006047 lose/loosePG 16 BS 16 20,5 7006055 lose/loosePG 21 BS 21 26 7006063 lose/loosePG 29 BS 29 35 7006071 lose/loosePG 36 BS 36 45 7006080 lose/loosePG 42 BS 42 52 7006098 lose/loosePG 48 BS 48 57 7006101 lose/loose

Blindscheiben

PEPA

Material:• Polyethylene, grey• Polyamide, white

194

Ergä

nzun

gste

ileIn

tegr

al P

arts

Page 197: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

195

Maßtabellen

Euro-Kabelbinder

Montierbare Kabelbinder

Laschen-Kabelbinder

Wiederlösbare Kabelbinder

Kabelbinder mit Beschriftungsfläche

Befestigungselemente

Befestigungsstücke

Kabelschellen

Befestigungssysteme Fastening systems

Seite/page

Measure charts 196-201

Euro-cable-ties 202

Mountable-head-ties 203

Lashing ties 203

Releasable cable ties 204

Marker cable ties 205

Cable tie mounts 206

Eyelet 207

Cable clamps 207

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

Page 198: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Measure chart self locking tiesDrawings show the original size

Maßtabelle Standard-KabelbinderAbbildungen in Originalgröße

TSL-290-S 286 4,8 75 22

Kabelbinder Länge Breite max. Bündel min. ZugfestigkeitTypen-Bez. mm mm mm kgSelf-locking ties Lenght Width Max. Bundle Min. TensilePart.-No. mm mm Dia. mm Strength KG.

TSL-250-S 252 4,8 60 22

TSL-190-S 186 4,8 46 22

TSL-160-S 160 4,8 40 22

TSL-200-S 200 4,8 50 22

TSL-120-S 120 4,8 25 22

TSL-370-I 368 3,6 100 18

TSL-300-I 302 3,6 77 18

TSL-200-I 202 3,6 50 18

TSL-80-M 80 2,5 15 8,0

TSL-90-M 90 2,5 17 8,0

TSL-102-M 102 2,5 19 8,0

TSL-120-M 118 2,5 30 8,0

TSL-140-M 140 2,5 34 8,0

TSL-160-M 155 2,5 40 8,0

TSL-200-M 196 2,5 50 8,0

TSL-140-I 140 3,6 34 18TSL-150-I 150 3,2 35 18TSL 180-I 182 3,6 44 18

TSL-250-I 250 3,6 60 18

Artikelnummer siehe Seite 202 / Art. no. on page 202

196

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

197

Page 199: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Measure chart self locking tiesMaßtabelle Standard-Kabelbinder

Kabelbinder Länge Breite max. Bündel min. ZugfestigkeitTypen-Bez. mm mm mm kgSelf-locking ties Lenght Width Max. Bundle Min. TensilePart.-No. mm mm Dia. mm Strength KG.

TSL-770-HD 770 8,8 220 79

TSL-710-HD 702 8,8 185 79

TSL-530-HD 525 8,8 150 79

TSL-430-HD 425 8,8 115 79

TSL-370-LHD 368 7,6 100 54

TSL-300-S 298 4,8 80 22

TSL-370-S 368 4,8 100 22

TSL-430-S 428 4,8 115 22TSL-500-S 500 4,8 145 22

TSL-150-LHD 152 7,6 35 54

TSL-200-LHD 202 7,6 48 54

TSL-290-LHD 292 7,6 75 54

TSL-450-LHD 450 7,6 133 54TSL-540-LHD 540 7,6 160 54

Artikelnummer siehe Seite 202 / Art. no. on page 202

198

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

199

TSL-800-HD 798 8,8 230 79TSL-910-HD 914 8,8 279 79

Page 200: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Measure chart self locking tiesMaßtabelle Standard-Kabelbinder

Kabelbinder Länge Breite max. Bündel min. ZugfestigkeitTypen-Bez. mm mm mm kgSelf-locking ties Lenght Width Max. Bundle Min. TensilePart.-No. mm mm Dia. mm Strength KG.

TSL-700-EHD 702 12,4 185 114

TSL-600-EHD 598 12,4 160 114

TSL-240-EHD 238 12,4 48 114

TSL-300-EHD 286 12,4 75 114

TSL-400-EHD 392 12,4 105 114

TSL-500-EHD 498 12,4 140 114

TSL-800-EHD 802 12,4 232 114

Artikelnummer siehe Seite 202 / Art. no. on page 202

200

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

201

Page 201: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Type Maße l x b Artikel- Artikel- VEmm Nummer Nummer Groß-

transparent schwarz packungType Dimensions Art. no. Art. no. PU

transparent black Bulkunit

EURO Kabelbinder

Material:Polyamid 6.6Kennzeichen:• 4-fach Verzahnung

am Verschlusskopf• für höchste Zugkraft

80°–

-40°

EURO Cable ties

Material:Polyamide 6.6Characteristics:• 4-fold interleaving• for strongest tensile force

TSL-80-M 80 x 2,5 8320008 8320201 1000TSL-90-M 90 x 2,5 8320009 8320202 1000TSL-100-M 102 x 2,5 8320010 8320203 1000TSL-120-M 118 x 2,5 8320012 8320204 1000TSL-140-M 140 x 2,5 8320014 8320205 1000TSL-160-M 155 x 2,5 8320016 8320206 1000TSL-200-M 196 x 2,5 8320020 8320207 1000TSL-140-I 140 x 3,6 8320030 8320217 1000TSL-150-I-M 150 x 3,2 8320031 8320221 1000TSL-180-I-M 182 x 3,6 8320035 8320222 1000TSL-200-I 202 x 3,6 8320032 8320218 1000TSL-250-I-M 250 x 3,6 8320033 8320223 1000TSL-300-I 302 x 3,6 8320034 8320219 1000TSL-370-I 368 x 3,6 8320036 8320220 1000TSL-120-S 120 x 4,8 8320046 8320230 1000TSL-160-S 160 x 4,8 8320048 8320231 1000TSL-190-S 186 x 4,8 8320050 8320232 1000TSL-200-S 200 x 4,8 8320052 8320233 1000TSL-250-S 252 x 4,8 8320054 8320234 1000TSL-290-SC 286 x 4,8 8320056 8320235 100TSL-300-SC 298 x 4,8 8320058 8320236 100TSL-370-SC 368 x 4,8 8320060 8320237 100TSL-430-SC 428 x 4,8 8320062 8320238 100TSL-500-SC 500 x 4,8 8320063 8320239 100TSL-150-LHD 150 x 7,6 8320072 8320248 100TSL-200-LHD 202 x 7,6 8320074 8320249 100TSL-290-LHD 292 x 7,6 8320076 8320250 100TSL-370-LHD 368 x 7,6 8320078 8320260 100TSL-450-LHD 450 x 7,6 8320079 8320247 100TSL-540-LHD 540 x 7,6 8320081 8320246 100TSL-430-HD 425 x 8,8 8320080 8320261 100TSL-530-HD 525 x 8,8 8320082 8320262 100TSL-710-HD 702 x 8,8 8320084 8320263 100TSL-770-HD 770 x 8,8 8320086 8320264 100TSL-800-HD 798 x 8,8 8320090 8320265 100TSL-910-HD 914 x 8,8 8320091 8320266 100TSL-240-EHD 238 x 12,4 8320093 8320275 100TSL-300-EHD 286 x 12,4 8320094 8320276 100TSL-400-EHD 392 x 12,4 8320095 8320277 100TSL-500-EHD 498 x 12,4 8320096 8320278 100TSL-600-EHD 598 x 12,4 8320097 8320279 100TSL-700-EHD 702 x 12,4 8320098 8320280 100TSL-800-EHD 802 x 12,4 8320099 8320281 100

PA

Type Maße l x b Artikel- Artikel- VEmm Nummer Nummer Klein-

transparent schwarz packungType Dimensions Art. no. Art. no. PU

transparent black smallunit

TSL-80-M/C 80 x 2,5 8320301 8320321 100TSL-90-M/C 90 x 2,5 8320302 8320322 100TSL-100-M/C 102 x 2,5 8320303 8320323 100TSL-120-M/C 118 x 2,5 8320304 8320324 100TSL-140-M/C 140 x 2,5 8320305 8320325 100TSL-160-M/C 155 x 2,5 8320306 8320326 100TSL-200-M/C 196 x 2,5 8320307 8320327 100TSL-140-I/C 140 x 3,6 8320308 8320328 100TSL-150-I/C 150 x 3,2 8320317 8320337 100TSL-180-I/C 182 x 3,6 8320318 8320338 100TSL-200-I/C 202 x 3,6 8320309 8320329 100TSL-250-I/C 250 x 3,6 8320319 8320340 100TSL-300-I/C 302 x 3,6 8320310 8320330 100TSL-370-I/C 368 x 3,6 8320311 8320331 100TSL-120-S/C 120 x 4,8 8320312 8320332 100TSL-160-S/C 160 x 4,8 8320313 8320333 100TSL-190-S/C 186 x 4,8 8320314 8320334 100TSL-200-S/C 200 x 4,8 8320315 8320335 100TSL-250-S/C 252 x 4,8 8320316 8320336 100

Großpackung / Bulk unit Kleinpackung / Small unit

202

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

Hinweis: Die Lagerung sollte entfernt von Wärmequellen in temperierten, abernicht besonders trockenen Räumen erfolgen, um die Materialeigenschaftennicht zu verändern.

Note: Please store in a conditioned not over-heated or too dry room in orderto preserve material properties.

Page 202: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Mountable head tiesMontierbare Kabelbinder

Kabelbinder Länge Breite max. Bündel min. Zugfestigkeit Art.-Nr. VETypen-Bez. mm mm mm kg Stck.

Special ties Lenght Width max. Bundle min. Tensile Art. no. PUPart.-No. mm mm Dia. mm Strength kg pcs.

Laschen-Kabelbinder Lashing ties

TSL-300-S-MH 300 4,8 75 22,2 8320451 100TSL-210-HD-MH 210 7,6 50 22,2 8320452 100TSL-300-HD-MH 300 7,6 75 54,0 8320453 100TSL-380-HD-MH 380 7,6 100 54,0 8320454 100

Kabelbinder Länge Breite max. Bündel min. Zugfestigkeit Art.-Nr. VETypen-Bez. mm mm mm kg Stck.

Special ties Lenght Width max. Bundle min. Tensile Art. no. PUPart.-No. mm mm Dia. mm Strength kg pcs.

TSL-120L.T. 115 6 25 25 8320460 1000

203

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

Page 203: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Releasable cable ties for 4,8 mmWiederlösbare Kabelbinder 4,8 mm

Wiederlösbare Kabelbinder 12,4 mm Releasable cable ties for 12,4 mm

Kabelbinder Länge Breite max. Bündel min. Zugfestigkeit Art.-Nr. VETypen-Bez. mm mm mm kg Stck.

Special ties Lenght Width max. Bundle min. Tensile Art. no. PUPart.-No. mm mm Dia. mm Strength kg pcs.

TSL-200-R-S 200 4,8 50 22,2 8320400 1000TSL-300-R-S 298 4,8 80 22,2 8320401 100

Kabelbinder Länge Breite max. Bündel min. Zugfestigkeit Art.-Nr. VETypen-Bez. mm mm mm kg Stck.

Special ties Lenght Width max. Bundle min. Tensile Art. no. PUPart.-No. mm mm Dia. mm Strength kg pcs.

TSL-240-EHD-R 238 12,4 48 114 8320410 100TSL-300-EHD-R 288 12,4 75 114 8320411 100TSL-400-EHD-R 392 12,4 105 114 8320412 100TSL-500-EHD-R 498 12,4 140 114 8320413 100TSL-600-EHD-R 598 12,4 160 114 8320414 100TSL-710-EHD-R 702 12,4 185 114 8320415 100

204

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

Page 204: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Marker cable ties (A)Kabelbinder mit Beschriftungsfläche (A)

Kabelbinder mit Beschriftungsfläche (B) Marker cable ties (B)

Kabelbinder Länge Breite max. Bündel min. Zugfestigkeit Art.-Nr. VETypen-Bez. mm mm mm kg Stck.

Special ties Lenght Width max. Bundle min. Tensile Art. no. PUPart.-No. mm mm Dia. mm Strength kg pcs.

TSL-110-M-M.T-A 110 2,5 19 8,0 8320420 1000

Kabelbinder Länge Breite max. Bündel min. Zugfestigkeit Art.-Nr. VETypen-Bez. mm mm mm kg Stck.

Special ties Lenght Width max. Bundle min. Tensile Art. no. PUPart.-No. mm mm Dia. mm Strength kg pcs.

TSL-100-M-M.T-B 100 2,5 19 8,0 8320430 1000TSL-200-M-M.T-B 200 2,5 50 8,0 8320431 1000

205

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

Page 205: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Tie mounts self-adhesive

Befestigungselement selbstklebend

Befestigungselementmit Schraubsockel

Fastening elementwith screw base

Type L W H B T Art.-Nr. VEStck.

Item no. L W H B T Art. no. PUpcs.

SDM-101 19 19 3,5 4,0 4,7 8320470 100SDM-102 28 28 4 5,0 5,0 8320471 100

Type H L W T B Art.-Nr. VEStck.

Item no. H L W T B Art. no. PUpcs.

STM-1 7 15 10 5 3 8320472 100STM-2 9 23 16 9 6 8320473 100

206

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

Page 206: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

EyeletBefestigungsstücke

Kabelschellen Cable Clamps

Type H L W T B Art.-Nr. VEStck.

Item no. H L W T B Art. no. PUpcs.

YE 5 mm 19 mm 9,5 mm 5 mm 3,4 mm 8320520 100

KAB-32 5,2 9,0 13 3,2 18,2 1,30 8320530 1000KAB-43 5,2 10,5 10,5 4,3 20,0 1,30 8320531 1000KAB-63 4,8 10,5 10,5 6,3 20,0 1,30 8320532 1000KAB-76 4,8 10,5 9,5 7,6 22,0 1,30 8320533 1000KAB-87 4,8 12,5 10,5 8,7 22,8 1,30 8320534 1000KAB-126 4,8 15,0 12,4 12,6 31,10 1,30 8320535 1000

Natur Abmessungenmm

Type A B C D E F Art.-Nr. VEStck.

Natural Dimensionsmm

Part. no. A B C D E F Art. no. PUpcs.

207

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

Page 207: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

208

Befe

stig

ungs

syst

eme

Fixi

ng M

ater

ial S

yste

ms

Page 208: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

209

Chemische Beständigkeit von Kunststoffen

Definition der Schutzarten

Was bedeutet EN 50262

Gewindetabellen

Anzugsdrehmomente für Kabelverschraubungen

nach DIN VDE 0619

Technischer Anhang Technical Appendix

Seite/page

Chemical resistance of plastic materials 210-213

Definition of the protective systems 214

What does standard EN 50262 mean 215

Thread chart 216

Tightening torque for cable glands

acc. to standard DIN VDE 0619 217

Tech

nisc

her A

nhan

gTe

chni

cal A

ppen

dix

Page 209: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Konzen- bei Poly- Poly- Poly- Thermo- Poly- Poly- Poly- Poly- Thermo- Nitriltration +°C amid amid amid plastisches propylen ethylen ethylen styrol plastisches Butadien-

% Polyurethan Elastomer Kautschuk

Chemische Beständigkeit von Kunststoffen + bedeutet: beständigo bedeutet: bedingt beständig- bedeutet: nicht beständig

Reagenz PA 6 PA 66 PA 12 PU PP HD-PE LD-PE PS TPE NBRAbgase, kohlenseäurehaltig jede 60 + +Abgase, SO2-haltig gering 60 + +Acetaldehyd 40 20 o o + + 20°C oAceton 100 20 + + + - + o o -Acrylsäure 100 >30 - - - -Alaune, wäßrig verdünnt 40 + + + + 20°C +Allylakohol 96 20 o o + + + + 20% +Aluminiumchlorid, wäßrig verdünnt 40 + + + + 20°C +Aluminiumsulfat, wäßrig verdünnt 40 + + + + 20°C +Ameisensäure, wäßrig 10 20 o o + + + +Ammoniak, wäßrig gesättigt 20 20% + 20% + 20% + + + + 25% +Ammoniumchlorid, wäßrig gesättigt 60 3% o + + + 20°C +Ammoniumnitrat, wäßrig verdünnt 40 + + + + 20°C +Ammoniumsulfat, wäßrig verdünnt 40 + + + -Anilin, rein 100 20 o o o + + + - +Anilinchlorhydrat, wäßrig gesättigt 20 + o oBenzaldehyd, wäßrig gesättigt 20 rein o rein o rein o + - -Benzin 100 20 + + + o + o - o +Benzoesäure, wäßrig jede 40 20% o 20% o + + + + -Benzol 100 20 + + + o o o - -Bleichlauge 12,5 Cl 20 - - o 3% - + + + + -Bohröle + + +Borax, wäßrig verdünnt 40 + + + + 20°C oBorsäure, wäßrig verdünnt 40 o o o 3% o + + + 20°C +Brom, flüssig 100 20 - - - - - - - - -Bromwasserstoffsäure, wäßrig bis 10 40 - - - + + + -Butandiol, wäßrig bis 10 20 rein + rein + + + +Butanol bis 100 20 + + + + +Butylacetat 100 20 + + + o o o - -Calciumchlorid, wäßrig gesättigt 40 + + + + + + + 20°C +Chlor jede 20 - - - - - - - -Chromalaun, wäßrig verdünnt 40 + + + 20°C +Cyclohexanol - 20 + + + + + + + +Dieselkraftstoff 85 + + + 20°C + 20°C + 20°C + 20°C +Eisenchlorid, wäßrig, neutral 10 20 + + + + + + + +Eisessig 100 20 + + + oEssigsäure 10 20 o o + 3% o + + + o +Ehtylalkohol, wäßrig 10 20 40Vol%+ 40Vol%+ 40Vol%+ + + +Ethylenchlorid 100 20 o - - -Ethylenoxid 100 20 oEthylether 100 20 o oFerricyankalium, wäßrig gesättigt 60 + + +Fluor 50 40 rein - rein - rein - - - -Formaldehyd, wäßrig verdünnt 40 rein + rein + rein o 40% + 40% + 40% + 30% + 20°C oGlukose, wäßrig jede 50 + + +Harnstoff, wäßrig bis 10 40 20% + 20% + 20% + + + + +Hydraulikflüssigkeit,schwerentflammbar 80 + + +Hydrauliköle H und HL (DIN 51524) 100 + + +Hydroxylaminsulfat, wäßrig bis 12 30 +Kalilauge, wäßrig 50 20 + + + + + + + 10% +Kaliumbromid, wäßrig jede 20 10% + 10% + 10% + + + + +Kaliumchlorid, wäßrig 10 20 + + + + + + + +Kaliumdichromat, wäßrig 40 20 5% o 5% o 5% o + + + +

210

Tech

nisc

her A

nhan

gTe

chni

cal A

ppen

dix

Page 210: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Konzen- bei Poly- Poly- Poly- Thermo- Poly- Poly- Poly- Poly- Thermo- Nitriltration +°C amid amid amid plastisches propylen ethylen ethylen styrol plastisches Butadien-

% Polyurethan Elastomer Kautschuk

Chemische Beständigkeit von Kunststoffen + bedeutet: beständigo bedeutet: bedingt beständig- bedeutet: nicht beständig

Reagenz PA 6 PA 66 PA 12 PU PP HD-PE LD-PE PS TPE NBRKaliumnitrat, wäßrig jede 20 10% + 10% + 10% + + + + + +Kaliumpermanganat, wäßrig gesättigt 20 + +Kieselfluorwasserstoffsäure,wäßrig bis 30 20 - - + + +Kohlendioxid, trocken 100 60 + + + 50°C + 20°C +Kohlensäure 100 60 + + + 20°C +Kresol, wäßrig bis 90 20 rein - rein - + + o o -Kühlflüssigkeiten DIN 53521 120 o oKupferchlorid, wäßrig gesättigt 20 + + + +Kupfersulfat, wäßrig gesättigt 60 + + + 20°C +Magnesiumcarbonat, wäßrig gesättigt 100 + 50°C +Magnesiumchlorid, wäßrig gesättigt 20 10% + 10% + 10% + + + + + +Methylalkohol 100 20 + + + 40°C + + + + + +Methylenchlorid 100 20 o o o o o -Milchsäure, wäßrig bis 90 20 10% + 10% + 10% + 3% o + + + 80% + +Mineralöle + + + 20°C + 20°C + 20°C +Natriumchlorat, wäßrig gesättigt 20 10% o 10% o 10% o + + +Natronlauge, wäßrig 10 20 + + + 3% o + + + + 50% +Nickelchlorid, wäßrig gesättigt 20 10% o 10% o 10% o + + +Nickelsulfat, wäßrig gesättigt 20 10% o 10% o 10% o + + + +Nitroglycerin verdünnt 20 - -Öle und Fette 20 + + + o oÖlsäure - 20 + + + + + + + oOxalsäure jede 20 10% o 10% o 10% o 3% o + + + + oOzon rein - - - o o oPetroleum 100 80 + + + 20°C + 20°C + 20°C o -Phosgen, gasförmig 100 20 o o oPhosphorsäure, wäßrig verdünnt 20 10% - 10% - 10% - 3% o + + + 86% + -Phosphorpentoxid 100 20 +Quecksilber rein 20 + + + + + + + +Salpetersäure, wäßrig 50 20 - - - 3% - o o o 30% + -Salzsäure, wäßrig 30 20 20% - 20% - 20% - 3% - + + + 15% + 10% + oSchmierfette, Basis Esteröle 110 o oSchmierfette, Basis Polyphenylester 110 + + +Schmierfette, Basis Silikonöle 110 + + +Schwefelkohlenstoff 100 20 + + + + o o - -Schwefelnatrium, wäßrig verdünnt 40 + + +Schwefelsäure, wäßrig 10 20 - - - 3% - 50% + 50% + 50% + + 98% + -Seewasser 40 + + + 20°C + + + + + + 20°C +Seifenlösung, wäßrig jede 20 verdünnt+ verdünnt+ verdünnt+ + + + +Tetrachlorkohlenstoff 100 20 + + + - o - -Toluol 100 20 + + + - o o o -Trichlorethen 100 20 o o o o o -Vinylacetat 100 20 +Wasserstoff 100 60 20°C + 20°C + 20°C + + + + 20°C +Xylol 100 20 + + + - o o - -Zinkchlorid, wäßrig verdünnt 60 10% o 10% o + + + 50°C + 20°C +Zinksulfat, wäßrig verdünnt 60 + + + 20°C +Zinnchlorid, wäßrig verdünnt 40 + + + - 10% + 20°C +Zitronensäure bis 10 40 20°C + 20°C + 20°C + 3% o + + + + 20°C +

Quelle: Kunststoff-Tabellen, z.B. Carlowitz, Carl Hanser Verlag und andereDie oben genannten Angaben ermöglichen eine Vorauswahl. Sie dienen jedoch nicht dazu, bestimmte Eigenschaften der Produkte oder deren Eignung für einenkonkreten Einsatzzweck zuzusichern. Sie entbinden den Käufer nicht von der ihm obliegenden Eingangskontrolle.

211

Tech

nisc

her A

nhan

gTe

chni

cal A

ppen

dix

Page 211: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Conzen- at Poly- Poly- Poly- Thermo- Poly- Poly- Poly- Poly- Thermo- Nitrile-tration temp. amide amide amide plastic propylene ethylene ethylene styrene plastic butadiene-

% +°C Polyurethane elastomere rubber

Chemical resistance of plastic materials + stands for: resistanto stands for: conditionally resistant- stands for: not resistant

Reagent PA 6 PA 66 PA 12 PU PP HD-PE LD-PE PS TPE NBRAcetaldehyde 40 20 o o + + 20°C oAcetic acid 100 20 + + + oAcetone 100 20 + + + - + o o -Acrylic acid 100 > 30 - - - -Allyl alcohol 96 20 o o + + + + 20% +Alum, hydrous dilute 40 + + + + 20°C +Aluminium chloride, hydrous dilute 40 + + + + 20°C +Aluminium sulphate, hydrous dilute 40 + + + + 20°C +Ammonia solution, hydrous saturated 20 20% + 20% + 20% + + + + 20% +Ammonium chloride, hydrous saturated 60 3% o + + + 20% +Ammonium nitrate, hydrous dilute 40 + + + + 20% +Ammonium sulphate, hydrous dilute 40 + + + -Aniline hydrochloride, hydrous saturated 20 + o oAniline, pure 100 20 o o o + + + - +Benzaldehyde, hydrous saturated 20 pure o pure o pure o + - -Benzine 100 20 + + + o + o - o +Benzoic acid, hydrous any 40 20% o 20% o + + + + -Benzole 100 20 + + + o o o - -Bleaching liquor 12,5 CI 20 - - o 3% - + + + + -Borax, hydrous dilute 40 + + + + 20% oBoric acid, hydrous dilute 40 o o o 3% o + + + 20% +Bromine, liquid 100 20 - - - - - - - - -Butanediol, hydrous to 10 20 pure + pure + + + +Butanol to 100 20 + + + + +Butylacetate 100 20 + + + o o o - -Calcium chloride, hydrous saturated 40 + + + + + + + 20% +Carbon bisulphide 100 20 + + + + o o - -Carbon dioxide 100 60 + + + 20% +Carbon dioxide, dry 100 60 + + + 50°C + 20% +Carbon tetrachloride 100 20 + + + - o - -Caustic potash solution, hydrous 50 20 + + + + + + + 10% +Caustic soda lye, hydrous 10 20 + + + 3% o + + + + 50% +Chlorine any 20 - - - - - - - -Chrome alum, hydrous dilute 40 + + + 20% +Citric Acid to 10 40 20% + 20% + 20% + 3% o + + + + 20% +Cooling liquids DIN 53521 120 o oCopper monochloride, hydrous saturated 20 + + + +Copper sulphate, hydrous saturated 60 + + + 20% +Cresol, hydrous to 90 20 pure - pure - + + o o -Cyclohexanol - 20 + + + + + + + +Diesel fuel 85 + + + 20°C + 20°C + 20°C + 20°C +Drilling oil + + +Ethanoic acid 10 20 o o + 3% o + + + o +Ethyl alcohol, hydrous 10 20 40 Vol.%+ 40 Vol.%+ 40 Vol.%+ + + +Ethyl dichloride 100 20 o - - -Ethyl ether 100 20 o oEthylene oxide, liquid 100 20 oFerric cyanide, hydrous saturated 60 + + +Ferrous chloride, hydrous, indiff. 10 20 + + + + + + +Fluorine 50 40 pure - pure - pure - - - -Formaldehyde, hydrous dilute 40 pure + pure + pure + 40% + 40% + 40% + 30% + 20°C oFormic acid, hydrous 10 20 o o + + + +Glucose, hydrous any 50 + + +Hydraulic fluid, hardly inflammable 80 + + +Hydraulic oil H and HL (DIN 51524) 100 + + +

212

Tech

nisc

her A

nhan

gTe

chni

cal A

ppen

dix

Page 212: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Conzen- at Poly- Poly- Poly- Thermo- Poly- Poly- Poly- Poly- Thermo- Nitrile-tration temp. amide amide amide plastic propylene ethylene ethylene styrene plastic butadiene-

% +°C Polyurethane elastomere rubber

Chemical resistance of plastic materials + stands for: resistanto stands for: conditionally resistant- stands for: not resistant

Reagent PA 6 PA 66 PA 12 PU PP HD-PE LD-PE PS TPE NBRHydrobromic acid, hydrous to 10 40 - - - + + + -Hydrochloric acid, hydrous 30 20 20% - 20% - 20% - 3% - + + + 15% + 10% + oHydrogen 100 60 20°C + 20°C + 20°C + + + + 20°C +Hydrosilicofluoric acid, hydrous to 30 20 - - + + +Hydroxylamine sulphate, hydrous to 12 30 +Kerosine 100 80 + + + 20°C + 20°C + 20°C o -Lactic acid, hydrous to 90 20 10% + 10% + 10% + 3% o + + + 80% + +Lubricating grease, base diester oil 110 o oLubricating grease (base polyphenyle ester) 110 + + +Lubricating grease, base silicone oil 110 + + +Magnesium carbonate, hydrous saturated 100 + 50°C +Magnesium chloride, hydrous saturated 20 10% + 10% + 10% + + + + + +Mercury pure 20 + + + + + + + +Methyl alcohol 100 20 + + + 40°C + + + + + +Methylene chloride 100 20 o o o o o -Mineral oil + + + 20°C + 20°C + 20°C +Nickel chloride, hydrous saturated 20 10% o 10% o 10% o + + +Nickel sulphate, hydrous saturated 20 10% o 10% o 10% o + + + +Nitric acid, hydrous 50 20 - - - 3% - o o o 30% + -Nitro glycerin dilute 20 - -Oil and grease 20 + + + o oOleic acid - 20 + + + + + + + oOxalic acid any 20 10% o 10% o 10% o 3% o + + + + oOzone pure - - - o o oPhosgene, gaesous 100 20 o o oPhoshoric acid, hydrous dilute 20 10% - 10% - 10% - 3% o + + + 86% + -Phosphorus pentoxide 100 20 +Potassium bromide, hydrous any 20 10% + 10% + 10% + + + + +Potassium chloride, hydrous 10 20 + + + + + + + +Potassium dichromate, hydrous 40 20 5% o 5% o 5% o + + + +Potassium nitrate, hydrous any 20 10% + 10% + 10% + + + + + +Potassium permangnate, hydrous saturated 20 + +Sea water 40 + + + 20°C + + + + + + 20°C +Soap solution, hydrous any 20 dilute + dilute + dilute + + + + +Sodium chlorate, hydrous saturated 20 10% o 10% o 10% o + + +Sodium sulphide, hydrous dilute 40 + + +Sulphuric acid, hydrous 10 20 - - - 3% - 50% + 50% + 50% + + 98% + -Tin dichloride, hydrous dilute 40 + + + - 10% + 20°C +Toluene 100 20 + + + - o o o -Trichloroethylene 100 20 o o o o o -Urea, hydrous to 10 40 20% + 20% + 20% + + + + +Vinyl acetate 100 20 +Waste gas, containing carbon dioxide any 60 + +Waste gas, containing SO2 low 60 + +Xylene 100 20 + + + - o o - -Zinc chloride, hydrous dilute 60 10% o 10% o + + + 50°C + 20°C +Zinc sulphate, hydrous dilute 60 + + + 20°C +

Quelle: Kunststoff-Tabellen, B. Carlowitz, Carl Hanser Verlag, and othersThe above mentioned data enable a preselection. However it is not the use of the data, to promise definite properties of the products or their suitability for aconcrete application purpose. The data doesn’t release the purchaser to control the quality conformance.

213

Tech

nisc

her A

nhan

gTe

chni

cal A

ppen

dix

Page 213: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Definition der Schutzartennach EN 60529

Die Schutzarten werden durch ein Kurzzeichen, das sich aus den zwei stetsgleichbleibenden Kennbuchstaben IP und zwei Kennziffern für den Schutzgradzusammensetzt, z. B. IP 54.

Definition of the protectivesystems acc. to EN 60529

The protective systems are stated through a short-code sign, compo-sing of thetwo unchangeable indicating letters IP and two indexes for the protection degreei. a. IP 54.

Protection degrees for contact and foreign body protectionFirst Designation Protection scopeIndex Description

0 No protection No special protection of persons against direct touch ofactive or againted particles. No protection of resourcesagainst penetration of solid foreign bodies.

1 Protection Protection against accidental large areaagainst large contact of active and inner agitated particles,foreign i.e. with the hand, but no protection againstbodies international access to these particles.

Protection against penetration of solid foreignbodies with a diameter larger than 50 mm.

2 Protection Protection against contect of fingers with activeagainst medium or inner agitated particles. Protection againstsized foreign penetration of solid foreign bodies with a dia-bodies meter larger than 12 mm.

3 Protection Protection against contact of active or inneragainst small agitated particles with tools, wires or similarsforeign bodies with a thickness of more than 2,5 mm. Pro-

tection against penetration of solid foreignbodies with a diameter larger than 2,5 mm.

4 Protection Protection against contact of active or inneragainst agitated particles with tools, wires or similarsgranulated with a thickness of more than 1 mm.foreign bodies

5 Protection Complete against contact with current-carryingagainst dust or inner agitated particles. Protection againstdeposit harmful dust deposit. The penetration of dust is

not completely prevented, but the dust may notpenetrate in such quantities that it injuresprocedures.

6 Protection Complete protection against contact withagainst dust current-carrying or inner agitated particles.penetration Protection against penetration of dust.

0

1

2

3

4

5

6

Kein Schutz

Schutz gegengroße Fremdkörper

Schutz gegenmittelgroßeFremdkörper

Schutz gegenkleine Fremdkör-per

Schutz gegenkornförmigeFremdkörperSchutz gegenStaub-ablagerung

Schutz gegenStaubeintritt

Schutzgrade für WasserschutzZweite Benennung SchutzumfangKennziffer Erklärung

01

2

3

4

5

6

7

8

Kein SchutzSchutz gegensenkrecht fallendes TropfwasserSchutz gegenschrägfallendesTropfwasserSchutz gegenSprühwasser

Schutz gegenSpritzwasserSchutz bei Strahlwasser

Schutz gegenÜberflutung

Schutz beimEintauchen

Schutz beimUntertauchen

Kein besonderer SchutzWassertropfen, die senkrecht fallen, dürfen keineschädliche Wirkung haben.

Wassertropfen, die in einem beliebigen Winkel von 15° zur Senkrechten fallen, dürfen keineschädliche Wirkung haben.

Wasser, das in einem beliebigen Winkel bis 60° zurSenkrechten fällt, darf keine schädliche Wirkung haben.Wasser, das aus allen Richtungen gegen das Betriebs-mittel spritzt, darf keine schädliche Wirkung haben.Ein Wasserstrahl aus einer Düse, der aus allen Rich-tungen gegen das Betriebsmittel gerichtet wird, darf keine schädliche Wirkung haben.Wasser bei vorübergehender Überflutung,z. B. durch schwere Seen, darf nicht in schädlicherMenge in das Betriebsmittel eindringen.Wasser darf nicht in schädlicher Menge eindringen,wenn das Betriebsmittel unter den festgelegten Druck-und Zeitbedingungen in Wasser eingetaucht wird.Wasser darf nicht in schädlicher Menge eindringen, wenn das Betriebsmittel unter Wasser ein-getaucht wird.

Protection values for water protectionSecond Designation Protection scopeIndex Description

0 No protection No special protection.1 Protection Water drops falling vertically may not have any

against dripping harmful consequences.water fallingvertically

2 Protection Water drops falling in any angle of 15° to theagainst dripping vertical line may not have any harmfulwater falling consequences.diagonally

3 Protection Water falling in any angle up to 60° to theagainst spray vertical line may not have any harmfulwater consequences.

4 Protection Water splashing from all directions ontoagainst resources may not have any harmfulsplashing water consequences.

5 Protection A water jet from a nozzle directed ontoagainst water resources from all directions may not have anyjets harmful.

6 Protection In case of temporary inundation i.e. of heavyagainst seas water may not penetrate resources inindunation harmful quantities.

7 Protection at Water may not penetrate in harmful quantitiesimmersion when resources are immersed into water under

the determined pressure and time conditions.8 Protection at Water my not penetrate in harmful quantities

submersion when resources are submerged under water.

Schutzgrade für Berührungs- und FremdkörperschutzErste Benennung SchutzumfangKennziffer Erklärung

Kein besonderer Schutz von Personen gegen direktesBerühren aktiver oder bewegter Teile. Kein Schutz desBetriebsmittels gegen Eindringen von festen Fremd-körpern.Schutz gegen zufälliges großflächiges Berühren aktiverund innerer bewegter Teile, z. B. mit der Hand, aberkein Schutz gegen absichtlichen Zugang zu diesen Tei-len. Schutz gegen Eindringen von festen Fremdkörpernmit einem Durchmesser größer als 50 mm.Schutz gegen Berühren mit den Fingern aktiver oder innerer bewegter Teile. Schutz gegen Ein-dringen von festen Fremdkörpern mit einem Durch-messer größer als 12 mm.Schutz gegen Berühren aktiver oder innerer bewegterTeile mit Werkzeugen, Drähten o. ä. von einer Dickegrößer als 2,5 mm. Schutz gegen Eindringen von fest-en Fremdkörpern mit einem Durchmesser größer als2,5 mm.Schutz gegen Berühren aktiver oder innerer bewegterTeile mit Werkzeugen, Drähten o. ä. von einer Dickegrößer als 1 mm.Vollständiger Schutz gegen Berührungen unter Span-nung stehender oder innerer bewegter Teile. Schutzgegen schädliche Staubablagerungen. Das Eindringenvon Staub ist nicht vollkommen verhindert, aber derStaub darf nicht in solchen Mengen eindringen, daßdie Arbeitsweise beeinträchtigt wird.Vollständiger Schutz gegen Berühren unter Spannungstehender oder innerer sich bewegender Teile. Schutzgegen Eindringen von Staub.

214

Tech

nisc

her A

nhan

gTe

chni

cal A

ppen

dix

Page 214: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Was bedeutet EN 50262

Die EN 50262 wurde am 01.04.1998 angenommen, und in Deutschland im April1999 unter DIN EN 50262/VDE 0619 veröffentlicht. Die altbekannten Normen fürKabelverschraubungen, wie DIN VDE 0619 (VDE 0619):1987-09, DIN 46319:1989-12, DIN 46320-1:1985-09 und DIN 46320-2...-4:1973-01 usw., durften nur nochbis zum 31.12.1999 angewandt werden. Auf diese Normen erteilte Zeichengeneh-migungen behalten bis zum 01.03.2001 ihre Gültigkeit.

1.) Anwendungsbereich der EN 50262:

Diese Europäische Norm beinhaltet Anforderungen und Prüfungen für die Kon-struktion und Ausführung von metrischen Kabelverschraubungen. Diese Normdeckt vollständige Kabelverschraubungen ab, nicht aber Teile von Kabelverschrau-bungen.

2.) Die Einschraubgewinde von Kabelverschraubungen müssen nach Tabelle 1 derEN 60423 konstruiert sein. Diese Gewindegrößen lauten: M6x0,75; M8x1; M10x1;M12x1,5; M16x1,5;M20x1,5;M25x1,5;M32x1,5; M40x1,5; M50x1,5; M63x1,5 undM75x1,5.

3.) Montagelöcher müssen die in Tabelle 1 angegebenen Werte besitzen.

4.) Kabelverschraubungen müssen über den gesamten Dichtungsbereich Rückhal-tevermögen für Kabel und Leitungen sicherstellen. Kabelverschraubungen mit Zug-entlastung für Kabel und Leitungen müssen die Leiter von Belastungen, einschließ-lich Verdrehen, entlasten. Die Prüfungen erfolgen jeweils mit dem kleinsten undgrößten angegebenen Werten des Dicht- bzw. Zugentlastungsbereiches, mit dennach Tabelle 2 dazugehörigen Kräften bzw. Drehmomenten.

Diese Prüfungen werden mit Prüfdornen durchgeführt, die die äusseren Abmessun-gen der Kabel und Leitungen nachbilden. Die Prüfdorne bestehen aus einem Metall-stab mit einem Mantel aus Elastomer.

5.) Kabelverschraubungen müssen widerstandsfähig gegen Schlageinwirkung sein.

Ein Prüfdorn entsprechend dem kleinsten Wert des Dichtungsbereiches wird imPrüfling befestigt, und die Prüfung wird dann bei der kleinsten Temperatur, mit derentsprechenden Energie der jeweiligen Kategorie nach Tabelle 3, durchgeführt.

Alle Angaben, Tabellen und Werte sind Auszüge aus der DIN 50262. In dieser Normwerden natürlich noch weitere Prüfungen (elektrische Eigenschaften, IP-Code usw.)beschrieben, die zur Klassifikation und Kennzeichnung von Kabelverschraubungennötig sind. Es würde aber den Rahmen dieses Kataloges sprengen, alle aufzuführen.Bei Fragen wenden Sie sich bitte an uns.

Tabelle 1: Montagelöcher für KabelverschraubungenChart 1: Mounting holes for cable glands

Größe Thread size 12 16 20 25 32 40 50 63Gewindegröße Diameter of M12 M16 M20 M25 M32 M40 M50 M63

Durchmesser des Mounting holeMontagelochs

+ 0,2/- 0,4 mm + 0,2/- 0,4 mm 12,5 16,5 20,5 25,5 32,5 40,5 50,5 63,5

Tabelle 3: Werte für die SchlageinwirkungChart 3: Value for impact test

Kategorie Categorie 1 2 3 4 5 6 7 8Kraft [N] Load [N] 2 2 2 2 10 10 10 20

Gewicht [kg] Weight [Kg] 0,2 0,2 0,2 0,2 1,0 1,0 1,0 2,0Energie [J] Energy [J] 0,2 0,5 1,0 2,0 4,0 7,0 10,0 20,0Höhe [m] Height [m] 0,1 0,25 0,5 1,0 0,4 0,7 1,0 1,0

Tabelle 2: Zugkräfte für Rückhaltevermögen und Zugentlastung, Drehmomente für die VerdrehprüfungChart 2: Tensile load for retaining power and tension relief, torque for turning testsKabel- und Leitungsdurchmesser Rückhaltevermögen Zugentlastung Ausführung A Zugentlastung Ausführung B Drehmoment Ausführung A u. B

Cable and Conduit diameter Retaining Power Tensile relief Type A Tensile relief Type B Torque Type A and B[mm] [N] [N] [N] [Nm]bis 4 5 - - -

> 4 bis 8 10 30 75 0,10> 8 bis 11 15 42 120 0,15> 11 bis 16 20 55 130 0,35>16 bis 23 25 70 140 0,60> 23 bis 31 30 80 250 0,80> 31 bis 43 45 90 350 0,90> 43 bis 55 55 100 400 1,00

> 55 70 115 450 1,20

What does standard EN 50262 mean?

The standard EN 50 262 was issued on 01.04.1998 and published in April 1999 inGermany as DIN-EN 50 262/VDE 0619. The well-known standards for cable glands,such as DIN VDE 0619 (VDE 0619): 1987-09, DIN 46 319: 1989-12, DIN 46 320-1:1985-09 and DIN 46 320-2...-4: 1973-01 etc, are only applicable until 31.12.1999.Approved technical drawings using these standards are valid until 01.03.2001.

1.) Fields of application for standard EN 50 262: This European standard containsthe requirements and tests for the construction and design of metric cable glands.This standard covers the cable gland as a complete part, but not the parts of cableglands.

2.) The screw-in thread of cable glands must be constructed according to chart 1of EN 60 423. The dimensions of the thread are M6x0,75; M8x1; M10x1; M12x1.5;M16x1.5; M20x1.5; M25x1.5; M32x1.5; M40x1.5; M50x1.5; M63x1.5 and M75x1.5.

3.) The mounting holes must be dimensioned according to Chart 1.

4.) Cable glands must be able to guarantee the retaining power for cables and con-duits for the complete sealing section. Cable glands with traction relief for cablesand conduits must free the conduits from the load of tension and twist. The testsare carried out, with in each case the smallest and largest mentioned value of theseal resp. tension relief section of the according loads and torque values in Chart 2.

These tests are performed with test pins reproducing the outer diameters of thecables and conduits. The test pins consist of a metal rod with an elastomere sheath.

5.) Cable glands must be impact resistant. A test pin according to the smallest valueof the sealing section is fastened to the test probe and then the test is carried out alowest temperature according to the energy in accordance with category of Chart 3.All specifications, charts and values are excerpts from standard DIN 50 262.Obviously further tests (electric properties, IP-Code etc.), which are necessary toclassify and mark cable glands are described in this standard. It would although gobeyond the scope of this catalogue.Please feel free to ask for further information!

215

Tech

nisc

her A

nhan

gTe

chni

cal A

ppen

dix

Page 215: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Gewindetabellen / Thread Chart

Metrisches ISO-Gewinde / Metric ISO threadISO Steigung mm Aussen-Ø D1 mm Kern-Ø D2 mm Durchgangsbohrung mmISO pitch mm Outer Ø D1 mm Core Ø D2 mm Hole Ø mm10 1,0 10 9 10,512 1,5 12 10,5 12,516 1,5 16 14,5 16,520 1,5 20 18,5 20,525 1,5 25 23,5 25,532 1,5 32 30,5 32,540 1,5 40 38,5 40,550 1,5 50 48,5 50,563 1,5 63 61,5 63,575 1,5 75 73,5 75,580 2,0 80 78 80,590 2,0 90 88 90,5

GasrohrgewindeBSP Steigung mm Außen-Ø D1 mm Kern-Ø D2 mm Durchgangsbohrung mmBSP pitch mm Outer Ø D1 mm Core Ø D2 mm Hole Ø mm1/4" 1,337 13,157 11,145 13,43/8" 1,337 16,662 14,950 17,01/2" 1,814 20,995 18,631 21,35/8" 1,814 26,441 24,117 26,81" 2,309 33,249 30,291 33,71 1/4" 2,309 41,910 38,952 42,41 1/2" 2,309 47,803 44,845 48,32" 2,309 59,614 56,656 60,22 1/2" 2,309 75,184 72,226 75,73" 2,309 87,884 84,926 88,53 1/2" 2,309 100,330 97,372 1014" 2,309 113,030 110,072 114

Pg-GewindePg Steigung mm Außen-Ø D1 mm Kern-Ø D2 mm Durchgangsbohrung mmPg pitch mm Outer Ø D1 mm Core Ø D2 mm Hole Ø mm7 1,27 12,5 11,28 12,79 1,41 15,2 13,86 15,411 1,41 18,6 17,26 18,813 1,41 20,4 19,06 20,716 1,41 22,5 21,16 22,821 1,587 28,3 26,78 28,629 1,587 37 35,48 37,436 1,587 47 45,58 47,542 1,587 54 52,48 54,548 1,588 59,3 57,78 59,8

NPT (konisch) amerikanisches RohrgewindeNPT Steigung mm Außen-Ø mm Gangzahl nNPT pitch mm Outer Ø mm Thread n1/4" 1,411 13,616 183/8" 1,411 17,055 181/2" 1,814 21,223 143/4" 1,814 26,568 141" 2,208 33,227 11 1/21 1/4" 2,208 41,984 11 1/21 1/2" 2,208 48,053 11 1/22" 2,208 60,091 11 1/22 1/2" 3,175 72,699 83" 3,175 88,608 83 1/2" 3,175 100,013 8

216

Tech

nisc

her A

nhan

gTe

chni

cal A

ppen

dix

Page 216: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Anzugsdrehmomente für Kabelverschraubungen nach DIN VDE 0619Tightening torque for cable glands according to standard DIN VDE 0619

Nenngröße Metall Kunststoff-FormmassenDrehmoment in Nm Drehmoment in Nm

Nominal size Metal Plastic moulded partsTightening torque [Nm] Tightening torque [Nm]

Pg 7 6,25 2,5Pg 9 6,25 3,75Pg 11 6,25 3,75

Pg 13,5 6,25 3,75Pg 16 7,5 5,0Pg 21 10,0 7,5Pg 29 10,0 7,5Pg 36 10,0 7,5Pg 42 10,0 7,5Pg 48 10,0 7,5

In ein Gehäuse mit Innengewindebzw. bei Durchgangsbohrungen indie Gegenmutter.

Druckschrauben dürfen nur mit max.21/43 des Drehmoments nach derTabelle angezogen werden.

Hinweis:Tabellenwerte sind allgemeine Vorga-ben, die Vorgehensweise muß werk-stoffgerecht erfolgen.

In casing with female thread respectively hole with lock nut.

Pressure screws may be tightenedwith max 21/43 of the tightening torque according to the chart.

Note:The values in the chart serve as a general guideline, the exact procedure depends upon the material.

217

Tech

nisc

her A

nhan

gTe

chni

cal A

ppen

dix

Page 217: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

218

Tech

nisc

her A

nhan

gTe

chni

cal A

ppen

dix

Page 218: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

219

Artikel-Nr. Verzeichnis Article Number Index

Seite/page

Article Number Index 220-235Artikel-Nr. Verzeichnis

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

Page 219: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

0000086 37 0102440 40 0409027 33 1000080 56 1203907 6 1240293 10

0000116 37 0102482 40 0409035 33 1000098 56 1203908 6 1240374 10

0000140 37 0102507 40 0409040 33 1000110 56 1203910 6 1240501 10

0000167 37 0102510 40 0409050 33 1000128 56 1203912 6 1240607 10

0000183 37 0102513 40 0409112 33 1000136 56 1203914 6 1240608 10

0000230 37 0102515 40 0409116 33 1000160 56 1203917 6 1240610 10

0000329 37 0102517 40 0409121 33 1000195 56 1203923 6 1240612 10

0000400 37 0102521 40 0409127 33 1000209 56 1203929 6 1240613 10

0000450 37 0102528 40 0409135 33 1000217 56 1203937 6 1240614 10

0000507 37 0200077 44 0409140 33 1000225 56 1203950 6 1240617 10

0001066 37 0200107 44 0409150 33 1000233 56 1206079 7 1240622 10

0001074 37 0200131 44 0412112 33 1002015 54 1206085 7 1240623 10

0001082 37 0200158 44 0412116 33 1002023 54 1206109 7 1240629 10

0001104 37 0200174 44 0412121 33 1002031 54 1206125 7 1240637 10

0001112 37 0200212 44 0412127 33 1002040 54 1206130 7 1240650 10

0001139 37 0200280 44 0412135 33 1002058 54 1206140 7 1250050 60

0001147 37 0200379 44 0412140 33 1002066 54 1206160 7 1250051 60

0001163 37 0200441 44 0412150 33 1002074 54 1206176 7 1250052 60

0001180 37 0200484 44 0413012 35 1002082 54 1206190 7 1250053 60

0001236 37 0300071 47 0413016 35 1002090 54 1206220 7 1250054 60

0001280 37 0300101 47 0413020 35 1002104 54 1206230 7 1250055 60

0001325 37 0300136 47 0413026 35 1100106 50 1206260 7 1250060 60

0001406 37 0300152 47 0413035 35 1100122 50 1206290 7 1250061 60

0001457 37 0300179 47 0803057 65 1100130 50 1206370 7 1250062 60

0001503 37 0300217 47 0803065 65 1100149 50 1206508 7 1250063 60

0100072 40 0300284 47 0803073 65 1100165 50 1212079 8 1250064 60

0100102 40 0300373 47 0803081 65 1100181 50 1212109 8 1250065 60

0100137 40 0300446 47 0803090 65 1100220 50 1212125 8 1250080 60

0100153 40 0300489 47 0803103 65 1100254 50 1212133 8 1250081 60

0100170 40 0401102 35 0803111 65 1100289 50 1212141 8 1250082 60

0100218 40 0401129 35 0803120 65 1100300 50 1212176 8 1250083 60

0100285 40 0401153 35 0803138 65 1100386 50 1212192 8 1250084 60

0100374 40 0401200 35 0803146 65 1100505 50 1212222 8 1250085 60

0100447 40 0401382 35 0803154 65 1200070 6 1212230 8 1250090 60

0100480 40 0401501 35 0803162 65 1200089 6 1212260 8 1250091 60

0100710 41 0401757 35 0803170 65 1200100 6 1212290 8 1250092 60

0100713 41 0402109 34 0803189 65 1200127 6 1212370 8 1250093 60

0100715 41 0402125 34 0803197 65 1200135 6 1212508 8 1250094 60

0100717 41 0402150 34 0803200 65 1200143 6 1212850 8 1250095 60

0100721 41 0402206 34 0803219 65 1200160 6 1214089 9 1252072 62

0100728 41 0402389 34 0803227 65 1200178 6 1214100 9 1252101 62

0101079 40 0402508 34 0803235 65 1200194 6 1214127 9 1300121 58

0101109 40 0402753 34 0803243 65 1200224 6 1214143 9 1300148 58

0101117 40 0402834 34 0803251 65 1200232 6 1214178 9 1300164 58

0101133 40 0402842 34 0803260 65 1200267 6 1214235 9 1300202 58

0101141 40 0402869 34 0803278 65 1200291 6 1214236 9 1300245 58

0101150 40 0402877 34 0803286 65 1200372 6 1214291 9 1300300 58

0101176 40 0402885 34 0803294 65 1200500 6 1214292 9 1301357 58

0101214 40 0402893 34 0803308 65 1203070 7 1214375 9 1301454 58

0101281 40 0402907 34 0803316 65 1203089 7 1214376 9 1301500 58

0101370 40 0404101 34 0803324 65 1203100 7 1214502 9 1800206 66

0101486 40 0404128 34 0803332 65 1203126 7 1240072 10 1800208 66

0102075 40 0404152 34 0803340 65 1203134 7 1240080 10 1800210 66

0102105 40 0404209 34 0803359 65 1203142 7 1240102 10 1800212 66

0102130 40 0404381 34 0803367 65 1203177 7 1240129 10 1800215 66

0102156 40 0404500 34 0803375 65 1203223 7 1240137 10 1800219 66

0102172 40 0404756 34 0803383 65 1203231 7 1240145 10 1800224 66

0102210 40 0409012 33 0803391 65 1203290 7 1240170 10 1800256 66

0102288 40 0409016 33 0803405 65 1203371 7 1240226 10 1800258 66

0102377 40 0409021 33 1000071 56 1203509 7 1240234 10 1800260 66

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

220

Page 220: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

1800262 66 1926304 12 2000130 38 2006138 42 2012138 48 2034069 43

1800265 66 1926306 12 2000164 38 2006162 42 2012162 48 2034077 43

1800269 66 1926307 12 2000210 38 2006219 42 2012219 48 2034085 43

1800274 66 1926308 12 2000296 38 2006294 42 2012294 48 2034093 43

1902016 64 1926310 12 2000369 38 2006367 42 2012367 48 2034115 43

1902024 64 1926312 12 2000423 38 2006421 42 2012421 48 2034123 43

1902032 64 1926313 12 2000482 38 2006480 42 2012480 48 2034130 43

1902040 64 1926314 12 2001071 38 2007070 42 2012516 49 2034131 43

1902059 64 1926316 12 2001098 38 2007096 42 2012517 49 2034140 43

1902067 64 1926317 12 2001110 38 2007118 42 2012520 49 2034158 43

1902075 64 1926319 12 2001136 38 2007134 42 2012521 49 2034166 43

1902083 64 1926322 12 2001160 38 2007169 42 2012525 49 2034174 43

1902091 64 1926323 12 2001217 38 2007215 42 2012532 49 2034182 43

1902105 64 1926326 12 2001292 38 2007290 42 2012540 49 2034190 43

1902113 64 1926329 12 2001365 38 2007363 42 2012550 49 2035006 43

1902121 64 1926337 12 2001420 38 2007428 42 2012563 49 2035014 43

1902130 64 1926350 12 2001489 38 2007487 42 2013070 48 2035022 43

1902148 64 1926604 11 2002078 38 2008076 45 2013096 48 2035030 43

1902156 64 1926606 11 2002094 38 2008092 45 2013118 48 2035049 43

1902164 64 1926607 11 2002116 38 2008114 45 2013134 48 2035057 43

1902172 64 1926608 11 2002132 38 2008130 45 2013169 48 2035065 43

1902180 64 1926610 11 2002167 38 2008165 45 2013215 48 2035073 43

1902199 64 1926612 11 2002213 38 2008211 45 2013290 48 2035081 43

1902202 64 1926613 11 2002299 38 2008297 45 2013363 48 2035090 43

1902210 64 1926614 11 2002361 38 2008360 45 2013428 48 2035103 43

1902229 64 1926616 11 2002426 38 2008424 45 2013487 48 2035111 43

1902237 64 1926617 11 2002485 38 2008483 45 2014076 48 2035120 43

1902245 64 1926619 11 2003074 38 2009072 45 2014092 48 2035138 43

1902253 64 1926622 11 2003090 38 2009099 45 2014114 48 2035154 43

1902261 64 1926623 11 2003112 38 2009110 45 2014130 48 2035162 43

1902270 64 1926626 11 2003139 38 2009137 45 2014165 48 2035170 43

1902288 64 1926629 11 2003163 38 2009161 45 2014211 48 2035189 43

1902296 64 1926637 11 2003210 38 2009218 45 2014297 48 2035197 43

1902300 64 1926650 11 2003295 38 2009293 45 2014360 48 2036010 46

1902318 64 1926654 11 2003368 38 2009366 45 2014424 48 2036029 46

1903063 65 1926656 11 2003422 38 2009420 45 2014483 48 2036037 46

1903080 65 1926657 11 2003481 38 2009480 45 2015072 48 2036045 46

1903101 65 1926658 11 2004070 42 2010070 45 2015099 48 2036053 46

1903268 65 1926660 11 2004097 42 2010097 45 2015110 48 2036061 46

1903306 65 1926662 11 2004119 42 2010119 45 2015137 48 2036070 46

1903365 65 1926663 11 2004135 42 2010135 45 2015161 48 2036088 46

1926003 12 1926664 11 2004160 42 2010160 45 2015218 48 2036096 46

1926004 12 1926666 11 2004216 42 2010216 45 2015293 48 2036100 46

1926006 12 1926667 11 2004291 42 2010291 45 2015366 48 2036118 46

1926007 12 1926669 11 2004364 42 2010364 45 2015420 48 2036126 46

1926008 12 1926672 11 2004429 42 2010429 45 2015480 48 2036134 46

1926100 12 1926673 11 2004488 42 2010488 45 2015516 49 2036142 46

1926120 12 1926676 11 2005077 42 2011077 45 2015517 49 2036150 46

1926130 12 1926679 11 2005093 42 2011093 45 2015520 49 2036169 46

1926140 12 1926687 11 2005115 42 2011115 45 2015521 49 2036177 46

1926160 12 1926690 11 2005131 42 2011131 45 2015525 49 2036185 46

1926170 12 1940008 13 2005166 42 2011166 45 2015532 49 2037017 46

1926190 12 1940011 13 2005212 42 2011212 45 2015540 49 2037025 46

1926220 12 1940013 13 2005298 42 2011298 45 2015550 49 2037033 46

1926223 12 1940015 13 2005360 42 2011360 45 2015563 49 2037041 46

1926226 12 1940019 13 2005425 42 2011425 45 2034018 43 2037050 46

1926229 12 1940026 13 2005484 42 2011484 45 2034026 43 2037068 46

1926237 12 2000075 38 2006073 42 2012073 48 2034034 43 2037076 46

1926250 12 2000091 38 2006090 42 2012090 48 2034042 43 2037084 46

1926303 12 2000113 38 2006111 42 2012111 48 2034050 43 2037092 46

221

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

Page 221: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

2037106 46 2102366 52 2700520 55 3003213 29 3205090 61 3804429 24

2037114 46 2102480 52 2700521 55 3003214 29 3205091 61 3806110 14

2037122 46 2200090 57 2700525 55 3003224 29 3205092 61 3806111 14

2037130 46 2200112 57 2700532 55 3003280 29 3205093 61 3806112 14

2037149 46 2200139 57 2700540 55 3003281 29 3205575 63 3806116 14

2037157 46 2200163 57 2700550 55 3003282 29 3205576 63 3806117 14

2037165 46 2200210 57 2700563 55 3003283 29 3205577 63 3806120 14

2037173 46 2200295 57 2706012 117 3003284 29 3205578 63 3806125 14

2037181 46 2200368 57 2706016 117 3003285 29 3205580 63 3806132 14

2051010 39 2200422 57 2706017 117 3003320 29 3205581 63 3806140 14

2051028 39 2200481 57 2706020 117 3003321 29 3205582 63 3806145 14

2051036 39 2200516 57 2706025 117 3003322 29 3205583 63 3806163 14

2051044 39 2200520 57 2706026 117 3003323 29 3800075 24 3806510 14

2051052 39 2200521 57 2706032 117 3003324 29 3800091 24 3806512 14

2051060 39 2200525 57 2706039 117 3003400 29 3800113 24 3806516 14

2051079 39 2200532 57 2706040 117 3003500 29 3800114 24 3806517 14

2051087 39 2200540 57 2706050 117 3004139 30 3800130 24 3806520 14

2051095 39 2609511 36 2706075 117 3004163 30 3800164 24 3806525 14

2051117 39 2609513 36 2706091 117 3004198 30 3800210 24 3806532 14

2051125 39 2609516 36 2706113 117 3004210 30 3800211 24 3806540 14

2051133 39 2609521 36 2706130 117 3004287 30 3800296 24 3806545 14

2051141 39 2609529 36 2706164 117 3004325 30 3800369 24 3806563 14

2051150 39 2609536 36 2706210 117 3004376 30 3800482 24 3807012 14

2051168 39 2609542 36 2706229 117 3004422 30 3801071 24 3807016 14

2051176 39 2609548 36 2706296 117 3004457 30 3801098 24 3807020 14

2051184 39 2609616 36 3000109 28 3004562 30 3801110 24 3807025 14

2051192 39 2609620 36 3000117 28 / 51 3005100 28 3801111 24 3807032 14

2052016 39 2609625 36 3000125 28 3005119 28 3801136 24 3807040 14

2052024 39 2609632 36 3000206 28 / 51 3005208 28 3801160 24 3807050 14

2052032 39 2609640 36 3000303 28 / 51 3005305 28 3801217 24 3807112 14

2052040 39 2609650 36 3000311 28 3005313 28 3801218 24 3807116 14

2052059 39 2609663 36 3000401 28 / 51 3005402 28 3801292 24 3807120 14

2052067 39 2609711 36 3000419 28 / 51 3005410 28 3801365 24 3807125 14

2052075 39 2609713 36 3000508 28 / 51 3005429 28 3801489 24 3807132 14

2052083 39 2609716 36 3000516 28 / 51 3005437 28 3802070 24 3807140 14

2052091 39 2609721 36 3000524 28 3005445 28 3802091 24 3807150 14

2052113 39 2609729 36 3000605 28 / 51 3005500 28 3802132 24 3808012 17

2052121 39 2609736 36 3000613 28 / 51 3005518 28 3803120 24 3808016 17

2052130 39 2609742 36 3000621 28 3005607 28 3803163 24 3808020 17

2052148 39 2609748 36 3000702 28 / 51 3005615 28 3803201 24 3808025 17

2052156 39 2609816 36 3000711 28 3005623 28 3803252 24 3808032 17

2052164 39 2609820 36 3000800 28 / 51 3005704 28 3803325 24 3808040 17

2052172 39 2609825 36 3002101 30 3201072 32 3803410 24 3808050 17

2052180 39 2609832 36 3002209 30 3201073 32 3803412 24 3808112 17

2052199 39 2609840 36 3002306 30 3201074 32 3803413 24 3808116 17

2101092 186 2609850 36 3002314 30 3201075 32 3803418 24 3808120 17

2101114 186 2609863 36 3002403 30 3201076 32 3803424 24 3808125 17

2101130 186 2700077 55 3002411 30 3201090 32 3803429 24 3808132 17

2101165 186 2700093 55 3002500 30 3201112 32 3803434 24 3808140 17

2101211 186 2700115 55 3002713 30 3201139 32 3804127 24 3808150 17

2101297 186 2700131 55 3003160 29 3201163 32 3804160 24 4000005 130

2101360 186 2700166 55 3003161 29 3201210 32 3804208 24 4000102 130

2101424 186 2700212 55 3003162 29 3201295 32 3804259 24 4000200 130

2101483 186 2700298 55 3003163 29 3201368 32 3804321 24 4000307 130

2102099 52 2700360 55 3003164 29 3201422 32 3804410 24 4000404 130

2102110 52 2700425 55 3003165 29 3201481 32 3804412 24 4000501 130

2102137 52 2700484 55 3003167 29 3205070 61 3804413 24 4000552 130

2102161 52 2700512 55 3003210 29 3205071 61 3804418 24 4000609 130

2102218 52 2700516 55 3003211 29 3205072 61 3804422 24 4000650 130

2102293 52 2700517 55 3003212 29 3205073 61 3804424 24 4000706 130

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

222

Page 222: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

4001001 134 4103351 136 4104450 132 4107411 104 4108120 110 4200760 120

4001109 134 4103363 136 4104463 132 4107413 104 4108125 110 4200761 120

4001206 134 4103364 136 4104516 133 4107416 104 4108132 110 4200762 120

4001303 134 4103412 136 4104520 133 4107421 104 4108140 110 4200763 120

4001400 134 4103416 136 4104521 133 4107429 104 4108150 110 4200764 120

4001508 134 4103420 136 4104525 133 4107436 104 4108163 110 4200770 120

4001559 134 4103421 136 4104532 133 4107442 104 4108207 111 4200771 120

4001605 134 4103425 136 4104540 133 4107448 104 4108209 111 4200772 120

4001656 134 4103432 136 4104550 133 4107507 104 4108211 111 4200773 120

4001702 134 4103440 136 4104563 133 4107509 104 4108213 111 4200780 120

4002008 130 4103450 136 4104616 133 4107511 104 4108216 111 4200781 120

4002105 130 4103463 136 4104620 133 4107513 104 4108221 111 4200782 120

4002202 130 4103516 137 4104621 133 4107516 104 4108229 111 4200790 120

4002300 130 4103520 137 4104625 133 4107521 104 4108236 111 4200794 120

4002407 130 4103521 137 4104632 133 4107529 104 4108242 111 4200795 120

4002504 130 4103525 137 4104640 133 4107536 104 4108248 111 4200796 120

4002555 130 4103532 137 4104650 133 4107542 104 4108307 111 4200800 121

4002601 130 4103540 137 4104663 133 4107548 104 4108309 111 4200801 121

4002652 130 4103550 137 4107012 104 4107609 105 4108311 111 4200802 121

4002709 130 4103563 137 4107016 104 4107611 105 4108313 111 4200810 121

4003004 134 4103616 137 4107017 104 4107613 105 4108316 111 4200811 121

4003101 134 4103620 137 4107020 104 4107616 105 4108321 111 4200812 121

4003209 134 4103621 137 4107021 104 4107621 105 4108329 111 4200813 121

4003306 134 4103625 137 4107025 104 4107629 105 4108336 111 4200814 121

4003403 134 4103632 137 4107026 104 4107709 105 4108342 111 4200820 121

4003500 134 4103640 137 4107032 104 4107711 105 4108348 111 4200821 121

4003551 134 4103650 137 4107033 104 4107713 105 4108400 111 4200822 121

4003608 134 4103663 137 4107040 104 4107716 105 4108401 111 4200830 121

4003659 134 4103812 138 4107050 104 4107721 105 4108402 111 4200831 121

4006100 131 4103816 138 4107063 104 4107729 105 4108403 111 4200832 121

4006208 131 4103817 138 4107112 104 4107800 106 4200055 119 4200833 121

4006305 131 4103820 138 4107116 104 4107801 106 4200056 119 4200835 121

4006402 131 4103821 138 4107117 104 4107802 106 4200071 119 4200836 121

4006500 131 4103825 138 4107120 104 4107803 106 4200080 119 4200837 121

4006550 131 4103826 138 4107121 104 4107804 106 4200098 119 4200840 121

4006607 131 4103832 138 4107125 104 4107805 106 4200101 119 4220307 74

4006658 131 4103833 138 4107126 104 4107806 106 4200102 119 4220309 74

4006704 131 4103834 138 4107132 104 4107807 106 4200110 119 4220311 74

4009100 135 4103840 138 4107133 104 4107809 106 4200128 119 4220313 74

4009207 135 4103841 138 4107140 104 4107810 106 4200136 119 4220316 74

4009304 135 4103850 138 4107150 104 4107811 106 4200143 119 4220321 74

4009401 135 4103851 138 4107163 104 4107812 106 4200144 119 4220329 74

4009509 135 4103863 138 4107216 105 4107850 106 4200152 119 4220336 74

4009550 135 4103864 138 4107220 105 4107851 106 4200160 119 4220342 74

4009606 135 4104312 132 4107221 105 4107852 106 4200178 119 4220348 74

4009658 135 4104316 132 4107225 105 4107853 106 4200179 119 4220351 74

4009695 135 4104320 132 4107226 105 4107854 106 4200186 119 4220352 74

4103312 136 4104321 132 4107232 105 4107855 106 4200187 119 4220353 74

4103313 136 4104325 132 4107233 105 4107856 106 4200195 119 4220354 74

4103316 136 4104332 132 4107240 105 4107857 106 4200196 119 4220355 74

4103317 136 4104340 132 4107316 105 4108012 110 4200217 119 4220356 74

4103320 136 4104350 132 4107320 105 4108016 110 4200292 119 4220357 74

4103321 136 4104363 132 4107321 105 4108020 110 4200365 119 4220358 74

4103325 136 4104412 132 4107325 105 4108025 110 4200420 119 4220359 74

4103326 136 4104416 132 4107326 105 4108032 110 4200489 119 4220360 74

4103332 136 4104420 132 4107332 105 4108040 110 4200500 119 4220407 75

4103333 136 4104421 132 4107333 105 4108050 110 4200537 119 4220409 75

4103340 136 4104425 132 4107340 105 4108063 110 4200750 120 4220411 75

4103341 136 4104432 132 4107407 104 4108112 110 4200751 120 4220413 75

4103350 136 4104440 132 4107409 104 4108116 110 4200752 120 4220416 75

223

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

Page 223: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

4220421 75 4221023 93 4221722 94 4224125 94 4224607 96 4248543 98

4220429 75 4221024 93 4221723 94 4224126 94 4224610 96 4248610 98

4220436 75 4221025 93 4221725 94 4224127 94 4224611 96 4248612 98

4220442 75 4221026 93 4221726 94 4224300 95 4224615 96 4248614 98

4220448 75 4221027 93 4221727 94 4224305 95 4224616 96 4248627 98

4220451 75 4221028 93 4221728 94 4224306 95 4224617 96 4248629 98

4220452 75 4221029 93 4221732 94 4224307 95 4224620 96 4248631 98

4220453 75 4221032 101 4221733 94 4224310 95 4224621 96 4248632 98

4220454 75 4221039 94 4221734 94 4224311 95 4224622 96 4248634 98

4220455 75 4221040 94 4221735 94 4224315 95 4224626 96 4248640 97

4220456 75 4221041 94 4221740 94 4224316 95 4224627 96 4248641 97

4220457 75 4221042 94 4221741 94 4224317 95 4224651 96 4248642 97

4220458 75 4221043 94 4221750 94 4224320 95 4224655 96 4248643 97

4220459 75 4221044 94 4221751 94 4224321 95 4224675 96 4248644 97

4220460 75 4221045 94 4221760 94 4224322 95 4224676 96 4248645 97

4220612 76 4221046 94 4221761 94 4224326 95 4224680 96 4248646 97

4220616 76 4221047 94 4222012 101 4224327 95 4224681 96 4248647 97

4220620 76 4221048 94 4222016 101 4224351 95 4224682 96 4248648 97

4220625 76 4221049 94 4222017 101 4224355 95 4224683 96 4248649 97

4220632 76 4221050 94 4222020 101 4224375 95 4224684 96 4248650 97

4220640 76 4221059 94 4222021 101 4224376 95 4224685 96 4248651 97

4220650 76 4221060 94 4222025 101 4224380 95 4224686 96 4248652 97

4220663 76 4221061 94 4222026 101 4224381 95 4224687 96 4248653 97

4220670 77 4221062 94 4222033 101 4224382 95 4224690 96 4248654 97

4220671 77 4221063 94 4222041 101 4224383 95 4224700 96 4248655 97

4220673 77 4221064 94 4222050 101 4224384 95 4224705 96 4248656 97

4220675 77 4221065 94 4222063 101 4224385 95 4224706 96 4248657 97

4220677 77 4221066 94 4222075 101 4224386 95 4224707 96 4248658 97

4220678 77 4221067 94 4222091 101 4224387 95 4224710 96 4248659 97

4220679 77 4221068 94 4222113 101 4224390 95 4224711 96 4248660 97

4220680 77 4221069 94 4222130 101 4224450 95 4224715 96 4248661 97

4220712 76 4221070 94 4222164 101 4224455 95 4224716 96 4248662 97

4220716 76 4221079 93 4222210 101 4224456 95 4224717 96 4248663 97

4220720 76 4221095 93 4222296 101 4224457 95 4224720 96 4248664 97

4220725 76 4221117 93 4222369 101 4224460 95 4224721 96 4248665 97

4220732 76 4221133 93 4222423 101 4224461 95 4224722 96 4248666 97

4220740 76 4221168 93 4222482 101 4224465 95 4224726 96 4248667 97

4220750 76 4221214 93 4224001 93 4224466 95 4224727 96 4248668 97

4220763 76 4221290 93 4224002 93 4224467 95 4224751 96 4248669 97

4220770 77 4221362 93 4224003 93 4224480 95 4224755 96 4248670 97

4220771 77 4221427 93 4224004 93 4224481 95 4224775 96 4248671 97

4220773 77 4221486 93 4224005 93 4224482 95 4224776 96 4248672 97

4220775 77 4221507 93 4224006 93 4224506 95 4224780 96 4248673 97

4220777 77 4221509 93 4224021 93 4224507 95 4224781 96 4248674 97

4220778 77 4221511 93 4224022 93 4224551 95 4224782 96 4248675 97

4220779 77 4221513 93 4224023 93 4224555 95 4224783 96 4248677 98

4220780 77 4221516 93 4224024 93 4224575 95 4224784 96 4248678 98

4221000 93 4221521 93 4224025 93 4224576 95 4224785 96 4248679 98

4221001 93 4221529 93 4224026 93 4224580 95 4224786 96 4248680 98

4221002 93 4221536 93 4224101 94 4224581 95 4224787 96 4248681 98

4221003 93 4221542 93 4224102 94 4224582 95 4224790 96 4248682 98

4221004 93 4221548 93 4224103 94 4224583 95 4248404 97 4248683 98

4221005 93 4221712 94 4224104 94 4224584 95 4248405 97 4248684 98

4221006 93 4221714 94 4224105 94 4224585 95 4248407 97 4248685 98

4221007 93 4221716 94 4224106 94 4224586 95 4248409 98 4248686 98

4221008 93 4221717 94 4224107 94 4224587 95 4248529 98 4248687 98

4221009 93 4221718 94 4224121 94 4224590 95 4248531 98 4248688 98

4221020 93 4221719 94 4224122 94 4224600 96 4248539 98 4248689 98

4221021 93 4221720 94 4224123 94 4224605 96 4248541 98 4248690 98

4221022 93 4221721 94 4224124 94 4224606 96 4248542 98 4248691 98

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

224

Page 224: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

4248692 98 4249643 99 4264112 113 4276427 116 4305503 124 4309090 125

4248693 98 4249644 99 4264116 113 4276428 116 4305504 124 4309103 125

4248694 98 4249645 99 4264117 113 4276429 116 4305505 124 4309111 125

4248695 98 4249646 99 4264120 113 4276432 116 4305506 124 4309120 125

4248696 98 4249647 99 4264121 113 4276433 116 4305507 124 4309138 125

4248697 98 4249648 99 4264125 113 4276434 116 4305508 124 4309146 125

4248698 98 4249649 99 4264126 113 4276435 116 4305509 124 4309154 125

4248699 98 4249650 99 4264132 113 4276440 116 4305510 124 4309162 125

4248700 98 4249651 99 4264133 113 4276441 116 4305511 124 4309170 125

4248701 98 4249652 99 4264140 114 4276442 116 4305512 124 4309189 125

4248702 98 4249653 99 4264150 114 4276463 116 4305513 124 4309197 125

4248703 98 4249654 99 4264163 114 4276464 116 4305514 124 4309200 125

4248704 98 4249655 99 4264217 113 4276465 116 4305515 124 4309219 125

4248705 98 4249656 99 4264221 113 4276466 116 4306090 175 4309227 125

4248706 98 4249657 99 4264226 113 4276467 116 4306112 175 4309235 125

4248707 98 4249658 100 4264232 113 4276468 116 4306139 175 4309243 125

4248708 98 4249659 100 4264312 114 4300009 122 4306163 175 4309251 125

4248709 98 4249660 100 4264316 114 4300017 122 4306210 175 4309300 126

4248710 98 4249661 100 4264320 114 4300025 122 4306295 175 4309305 126

4248711 98 4249662 100 4264325 114 4300033 122 4306316 175 4309310 126

4248712 98 4249663 100 4264332 114 4300041 122 4306317 175 4309311 126

4248713 98 4249664 100 4276040 115 4300050 122 4306320 175 4309312 126

4248714 98 4249670 100 4276050 115 4300068 122 4306321 175 4309313 126

4248715 98 4249671 100 4276060 115 4300116 122 4306325 175 4309315 126

4248716 98 4249672 100 4276070 115 4300120 122 4306332 175 4309316 126

4248717 98 4249673 100 4276080 115 4300121 122 4307003 176 4309320 126

4248719 98 4249674 100 4276090 115 4300125 122 4307011 176 4309321 126

4248720 98 4249675 100 4276100 115 4300126 122 4307020 176 4309322 126

4248721 98 4249676 100 4276110 115 4300132 122 4307038 176 4309323 126

4248722 98 4249677 100 4276120 115 4300133 122 4307046 176 4309325 126

4248723 98 4249678 100 4276130 115 4304071 174 4307054 176 4309326 126

4248724 98 4249679 100 4276140 115 4304098 174 4307062 176 4309327 126

4248725 98 4249680 100 4276150 115 4304110 174 4307612 176 4309330 126

4249600 99 4249681 100 4276160 115 4304136 174 4307616 176 4309331 126

4249601 99 4249682 100 4276170 115 4304160 174 4307617 176 4309332 126

4249602 99 4249683 100 4276180 115 4304217 174 4307620 176 4309333 126

4249603 99 4249684 100 4276195 115 4304292 174 4307621 176 4309335 126

4249604 99 4249685 100 4276210 115 4304365 174 4307625 176 4309336 126

4249610 99 4249686 100 4276225 115 4304420 174 4307632 176 4309337 126

4249611 99 4249687 100 4276240 115 4304489 174 4308093 123 5202078 128

4249612 99 4249688 100 4276250 115 4304512 174 4308115 123 5202094 128

4249613 99 4249689 100 4276270 115 4304516 174 4308131 123 5202116 128

4249614 99 4249690 100 4276290 115 4304517 174 4308166 123 5202132 128

4249615 99 4249691 100 4276310 115 4304520 174 4308212 123 5202167 128

4249616 99 4249692 100 4276330 115 4304521 174 4308298 123 5202213 128

4249617 99 4249693 100 4276350 115 4304525 174 4308516 123 5202299 128

4249618 99 4249694 100 4276370 115 4304532 174 4308520 123 5202361 128

4249619 99 4249695 100 4276413 116 4305078 124 4308521 123 5202418 128

4249620 99 4249696 100 4276414 116 4305094 124 4308525 123 5202426 128

4249621 99 4249697 100 4276415 116 4305116 124 4308526 123 5202434 128

4249622 99 4249698 100 4276416 116 4305132 124 4308532 123 5202485 128

4249623 99 4249699 100 4276417 116 4305167 124 4308533 123 5202507 128

4249624 99 4249700 100 4276418 116 4305213 124 4309014 125 5202515 128

4249625 99 4264007 113 4276420 116 4305299 124 4309022 125 5202590 128

4249626 99 4264009 113 4276421 116 4305361 124 4309030 125 5202604 128

4249627 99 4264011 113 4276422 116 4305426 124 4309049 125 5202612 128

4249628 99 4264013 113 4276423 116 4305485 124 4309057 125 5202620 128

4249640 99 4264016 113 4276424 116 4305500 124 4309065 125 5203012 129

4249641 99 4264021 113 4276425 116 4305501 124 4309073 125 5203016 129

4249642 99 4264029 113 4276426 116 4305502 124 4309081 125 5203020 129

225

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

Page 225: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

5203021 129 5210632 82 5211321 84 5306031 127 5307250 72 5308721 70

5203025 129 5210637 82 5211329 84 5306032 127 5307263 72 5308729 70

5203026 129 5210638 82 5211350 84 5306033 127 5307512 72 5308736 70

5203032 129 5210639 82 5211351 84 5306040 127 5307516 72 5308737 70

5203033 129 5210640 82 5211352 84 5306041 127 5307517 72 5308738 70

5203040 129 5210641 82 5211353 84 5306042 127 5307520 72 5308900 73

5203050 129 5210737 82 5211354 84 5306043 127 5307521 72 5308901 73

5203051 129 5210738 82 5211355 84 5306050 127 5307525 72 5308902 73

5203063 129 5210739 82 5211356 84 5306051 127 5307526 72 5308903 73

5210070 82 5210740 82 5211357 84 5306052 127 5307532 72 5308904 73

5210097 82 5210741 82 5211358 84 5306107 127 5307540 72 5308905 73

5210107 82 5210816 82 5211359 84 5306109 127 5307550 72 5308906 73

5210109 82 5210820 82 5211416 84 5306111 127 5307563 72 5308907 73

5210111 82 5210821 82 5211420 84 5306112 127 5307612 72 5308910 73

5210113 82 5210825 82 5211421 84 5306113 127 5307616 72 5308911 73

5210116 82 5210832 82 5211425 84 5306114 127 5307617 72 5308912 73

5210119 82 5210837 82 5211432 84 5306116 127 5307620 72 5308913 73

5210121 82 5210838 82 5211441 84 5306117 127 5307621 72 5308914 73

5210129 82 5210839 82 5211442 84 5306130 127 5307625 72 5308915 73

5210135 82 5210840 82 5211443 84 5306131 127 5307626 72 5308916 73

5210149 82 5210841 82 5211444 84 5306132 127 5307632 72 5308917 73

5210150 82 5211107 84 5211445 84 5306133 127 5307640 72 5308920 73

5210151 82 5211109 84 5211446 84 5306140 127 5307650 72 5308921 73

5210152 82 5211111 84 5211447 84 5306141 127 5307663 72 5308922 73

5210153 82 5211113 84 5211448 84 5306142 127 5307712 72 5308923 73

5210154 82 5211116 84 5211516 84 5306143 127 5307716 72 5308924 73

5210155 82 5211121 84 5211520 84 5306150 127 5307717 72 5308925 73

5210160 82 5211129 84 5211521 84 5306151 127 5307720 72 5308926 73

5210216 82 5211150 84 5211525 84 5306152 127 5307721 72 5308927 73

5210249 82 5211151 84 5211532 84 5307012 72 5307725 72 5308930 71

5210250 82 5211152 84 5211541 84 5307016 72 5307726 72 5308931 71

5210251 82 5211153 84 5211542 84 5307017 72 5307732 72 5308932 71

5210252 82 5211154 84 5211543 84 5307020 72 5307740 72 5308933 71

5210253 82 5211155 84 5211544 84 5307021 72 5307750 72 5308934 71

5210254 82 5211156 84 5211545 84 5307025 72 5307763 72 5308935 71

5210255 82 5211157 84 5211546 84 5307026 72 5308070 70 5308936 71

5210291 82 5211158 84 5211547 84 5307032 72 5308097 70 5308937 71

5210316 82 5211159 84 5211548 84 5307040 72 5308119 70 5308938 71

5210320 82 5211207 84 5211616 84 5307050 72 5308135 70 5308939 71

5210321 82 5211209 84 5211620 84 5307063 72 5308160 70 5308940 71

5210325 82 5211211 84 5211621 84 5307112 72 5308216 70 5308941 71

5210332 82 5211213 84 5211625 84 5307116 72 5308291 70 5308942 71

5210507 82 5211216 84 5211632 84 5307117 72 5308364 70 5308943 71

5210509 82 5211221 84 5211641 84 5307120 72 5308365 70 5308944 71

5210511 82 5211229 84 5211642 84 5307121 72 5308366 70 5308945 71

5210513 82 5211250 84 5211643 84 5307125 72 5308507 70 5308946 71

5210516 82 5211251 84 5211644 84 5307126 72 5308509 70 5308947 71

5210521 82 5211252 84 5211645 84 5307132 72 5308511 70 5308948 71

5210529 82 5211253 84 5211646 84 5307140 72 5308513 70 5308949 71

5210549 82 5211254 84 5211647 84 5307150 72 5308516 70 5308950 71

5210550 82 5211255 84 5211648 84 5307163 72 5308521 70 5308951 71

5210551 82 5211256 84 5306007 127 5307212 72 5308529 70 5308952 71

5210552 82 5211257 84 5306009 127 5307216 72 5308536 70 5308953 71

5210553 82 5211258 84 5306011 127 5307217 72 5308537 70 5308954 71

5210554 82 5211259 84 5306012 127 5307220 72 5308538 70 5308955 71

5210555 82 5211307 84 5306013 127 5307221 72 5308707 70 5308956 71

5210616 82 5211309 84 5306014 127 5307225 72 5308709 70 5308957 71

5210620 82 5211311 84 5306016 127 5307226 72 5308711 70 5308958 71

5210621 82 5211313 84 5306017 127 5307232 72 5308713 70 5308959 71

5210625 82 5211316 84 5306030 127 5307240 72 5308716 70 5308960 71

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

226

Page 226: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

5308961 71 5309725 71 5313683 83 5315295 89 5315639 88 5315724 88

5308962 71 5309732 71 5313684 83 5315296 89 5315640 88 5315725 88

5309007 70 5309740 71 5313685 83 5315297 89 5315641 88 5315726 88

5309009 70 5309750 71 5313686 83 5315500 88 5315642 88 5315727 88

5309011 70 5309763 71 5313687 83 5315501 88 5315650 89 5315728 88

5309013 70 5313600 83 5313700 83 5315502 88 5315651 89 5315729 88

5309016 70 5313601 83 5313701 83 5315503 88 5315652 89 5315730 88

5309021 70 5313602 83 5313702 83 5315504 88 5315653 89 5315731 88

5309029 70 5313603 83 5313703 83 5315510 88 5315654 89 5315732 88

5309036 70 5313604 83 5313704 83 5315515 89 5315655 89 5315733 88

5309042 70 5313605 83 5313705 83 5315516 89 5315656 89 5315734 88

5309048 70 5313606 83 5313706 83 5315520 89 5315658 89 5315740 88

5309107 70 5313610 83 5313707 83 5315521 89 5315659 89 5315741 88

5309109 70 5313611 83 5313708 83 5315522 89 5315660 89 5315742 88

5309111 70 5313612 83 5313709 83 5315523 89 5315661 89 5315743 88

5309113 70 5313613 83 5313710 83 5315524 89 5315662 89 5315744 88

5309116 70 5313614 83 5313711 83 5315525 89 5315663 89 5315745 88

5309121 70 5313615 83 5313712 83 5315526 89 5315664 89 5315746 88

5309129 70 5313616 83 5313713 83 5315527 89 5315665 89 5315747 88

5309136 70 5313620 83 5313714 83 5315528 89 5315666 89 5315748 88

5309142 70 5313621 83 5313715 83 5315529 89 5315667 89 5315749 88

5309148 70 5313622 83 5313716 83 5315530 89 5315668 89 5315750 88

5309207 70 5313623 83 5313717 83 5315531 89 5315669 89 5315751 88

5309209 70 5313624 83 5313718 83 5315532 89 5315670 89 5315752 88

5309211 70 5313625 83 5313719 83 5315540 89 5315671 89 5315753 88

5309213 70 5313626 83 5313720 83 5315542 89 5315672 89 5315754 89

5309216 70 5313630 83 5313721 83 5315543 89 5315673 89 5315755 89

5309221 70 5313631 83 5313722 83 5315544 89 5315674 89 5315756 89

5309229 70 5313632 83 5313723 83 5315545 89 5315675 89 5315757 89

5309236 70 5313633 83 5313724 83 5315546 89 5315676 89 5315758 89

5309242 70 5313634 83 5313725 83 5315547 89 5315677 89 5315759 89

5309248 70 5313640 83 5313726 83 5315600 88 5315678 89 5315760 89

5309512 71 5313641 83 5313727 83 5315601 88 5315679 89 5315761 89

5309515 71 5313642 83 5313728 83 5315610 88 5315683 89 5315762 89

5309516 71 5313643 83 5313729 83 5315611 88 5315684 89 5315763 89

5309519 71 5313644 83 5315110 88 5315612 88 5315690 89 5315764 89

5309520 71 5313650 83 5315111 88 5315613 88 5315691 89 5315765 89

5309524 71 5313651 83 5315112 88 5315614 88 5315692 89 5315766 89

5309525 71 5313652 83 5315113 88 5315615 88 5315693 89 5315767 89

5309532 71 5313653 83 5315114 88 5315616 88 5315694 89 5315768 89

5309540 71 5313654 83 5315130 88 5315617 88 5315695 89 5315769 89

5309550 71 5313660 83 5315160 89 5315620 88 5315696 89 5315770 89

5309563 71 5313661 83 5315210 89 5315621 88 5315697 89 5315771 89

5309612 71 5313662 83 5315211 89 5315622 88 5315698 89 5315772 89

5309615 71 5313663 83 5315212 89 5315623 88 5315699 89 5315773 89

5309616 71 5313664 83 5315213 89 5315624 88 5315700 89 5315774 89

5309619 71 5313665 83 5315214 89 5315625 88 5315705 88 5315775 89

5309620 71 5313666 83 5315215 89 5315626 88 5315706 88 5315776 89

5309624 71 5313667 83 5315216 89 5315627 88 5315707 88 5315777 89

5309625 71 5313670 83 5315217 89 5315628 88 5315708 88 5315778 89

5309632 71 5313671 83 5315218 89 5315629 88 5315709 88 5315779 89

5309640 71 5313672 83 5315219 89 5315630 88 5315710 88 5315780 89

5309650 71 5313673 83 5315220 89 5315631 88 5315711 88 5315781 89

5309663 71 5313674 83 5315221 89 5315632 88 5315712 88 5315782 89

5309712 71 5313675 83 5315222 89 5315633 88 5315713 88 5315783 89

5309715 71 5313676 83 5315289 89 5315634 88 5315714 88 5315784 89

5309716 71 5313677 83 5315290 89 5315635 88 5315720 88 5315786 89

5309719 71 5313680 83 5315292 89 5315636 88 5315721 88 5315787 89

5309720 71 5313681 83 5315293 89 5315637 88 5315722 88 5315788 89

5309724 71 5313682 83 5315294 89 5315638 88 5315723 88 5315789 89

227

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

Page 227: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

5315790 89 5315867 89 5316211 90 5317216 90 5318303 90 5320074 85

5315791 89 5315868 89 5316212 90 5317217 90 5318304 90 5320075 85

5315792 89 5315869 89 5316213 90 5317300 90 5318305 90 5320076 85

5315793 89 5315870 89 5316214 90 5317301 90 5318306 90 5320081 85

5315794 89 5315871 89 5316215 90 5317302 90 5318307 90 5320082 85

5315795 89 5315872 89 5316216 90 5317303 90 5318308 90 5320083 85

5315796 89 5315873 89 5316217 90 5317304 90 5318309 90 5320084 85

5315797 89 5315874 89 5316300 90 5317305 90 5318310 90 5320085 85

5315798 89 5315875 89 5316301 90 5317306 90 5318311 90 5320086 85

5315799 89 5315876 89 5316302 90 5317307 90 5318312 90 5320091 85

5315800 88 5315877 89 5316303 90 5317308 90 5318313 90 5320092 85

5315801 88 5315878 89 5316304 90 5317309 90 5318400 90 5320093 85

5315810 88 5315879 89 5316305 90 5317310 90 5318401 90 5320094 85

5315811 88 5315880 89 5316306 90 5317311 90 5318402 91 5320095 85

5315812 88 5315881 89 5316307 90 5317312 90 5318403 91 5320096 85

5315813 88 5315891 89 5316308 90 5317313 90 5318404 91 5320100 85

5315814 88 5315892 89 5316309 90 5317400 90 5318405 91 5320101 85

5315815 88 5315893 89 5316310 90 5317401 90 5318406 91 5320102 85

5315816 88 5315894 89 5316311 90 5317402 91 5318407 91 5320103 85

5315817 88 5315895 89 5316312 90 5317403 91 5318408 91 5320104 85

5315820 88 5315896 89 5316313 90 5317404 91 5318409 91 5320105 85

5315821 88 5315897 89 5316400 90 5317405 91 5318410 91 5320106 85

5315822 88 5315898 89 5316401 90 5317406 91 5318411 91 5320107 85

5315823 88 5315899 89 5316402 91 5317407 91 5318412 91 5320120 85

5315824 88 5315900 89 5316403 91 5317408 91 5318413 91 5320121 85

5315825 88 5315910 89 5316404 91 5317409 91 5318414 91 5320122 85

5315826 88 5315911 89 5316405 91 5317410 91 5318415 91 5320123 85

5315827 88 5315912 89 5316406 91 5317411 91 5318416 91 5320127 85

5315828 88 5315913 89 5316407 91 5317412 91 5318417 91 5320140 85

5315829 88 5315914 89 5316408 91 5317413 91 5319717 89 5320141 85

5315830 88 5315915 89 5316409 91 5317414 91 5320001 85 5320142 85

5315831 88 5315916 89 5316410 91 5317415 91 5320002 85 5320143 85

5315832 88 5315917 89 5316411 91 5317416 91 5320003 85 5320144 85

5315833 88 5315918 89 5316412 91 5317417 91 5320004 85 5320145 85

5315834 88 5315919 89 5316413 91 5318100 90 5320005 85 5320146 85

5315835 88 5315920 89 5316414 91 5318101 90 5320006 85 5320147 85

5315836 88 5315921 89 5316415 91 5318102 90 5320007 85 5320150 85

5315837 88 5315922 89 5316416 91 5318103 90 5320008 85 5320151 85

5315838 88 5315923 89 5316417 91 5318104 90 5320009 85 5320152 85

5315839 88 5315924 89 5317100 90 5318200 90 5320021 85 5320153 85

5315840 88 5315925 89 5317101 90 5318201 90 5320022 85 5320158 85

5315841 88 5315926 89 5317102 90 5318202 90 5320023 85 5320160 85

5315842 88 5315927 89 5317103 90 5318203 90 5320024 85 5320161 85

5315850 89 5315969 89 5317104 90 5318204 90 5320025 85 5320162 85

5315851 89 5316100 90 5317200 90 5318205 90 5320026 85 5320163 85

5315852 89 5316101 90 5317201 90 5318206 90 5320027 85 5320164 85

5315853 89 5316102 90 5317202 90 5318207 90 5320028 85 5320165 85

5315854 89 5316103 90 5317203 90 5318208 90 5320029 85 5320166 85

5315855 89 5316104 90 5317204 90 5318209 90 5320051 85 5320167 85

5315856 89 5316200 90 5317205 90 5318210 90 5320052 85 5320170 85

5315857 89 5316201 90 5317206 90 5318211 90 5320053 85 5320171 85

5315858 89 5316202 90 5317207 90 5318212 90 5320054 85 5320172 85

5315859 89 5316203 90 5317208 90 5318213 90 5320055 85 5320173 85

5315860 89 5316204 90 5317209 90 5318214 90 5320056 85 5320177 85

5315861 89 5316205 90 5317210 90 5318215 90 5320057 85 5320300 86

5315862 89 5316206 90 5317211 90 5318216 90 5320058 85 5320305 86

5315863 89 5316207 90 5317212 90 5318217 90 5320059 85 5320306 86

5315864 89 5316208 90 5317213 90 5318300 90 5320071 85 5320307 86

5315865 89 5316209 90 5317214 90 5318301 90 5320072 85 5320310 86

5315866 89 5316210 90 5317215 90 5318302 90 5320073 85 5320311 86

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

228

Page 228: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

5320315 86 5320428 86 5320542 86 5320649 87 5320738 87 5320821 87

5320316 86 5320430 86 5320543 86 5320650 87 5320740 87 5320822 87

5320317 86 5320431 86 5320544 86 5320651 87 5320741 87 5320823 87

5320320 86 5320432 86 5320545 86 5320652 87 5320742 87 5320830 87

5320321 86 5320433 86 5320551 86 5320653 87 5320743 87 5320831 87

5320322 86 5320434 86 5320555 86 5320655 87 5320745 87 5320832 87

5320325 86 5320435 86 5320560 86 5320656 87 5320746 87 5320835 87

5320326 86 5320436 86 5320561 86 5320657 87 5320747 87 5320836 87

5320327 86 5320437 86 5320565 86 5320658 87 5320748 87 5320837 87

5320328 86 5320442 86 5320566 86 5320659 87 5320749 87 5320838 87

5320330 86 5320443 86 5320570 86 5320660 87 5320750 87 5320840 87

5320331 86 5320444 86 5320571 86 5320661 87 5320751 87 5320841 87

5320332 86 5320445 86 5320575 86 5320670 87 5320752 87 5320842 87

5320333 86 5320451 86 5320576 86 5320671 87 5320753 87 5320843 87

5320334 86 5320455 86 5320580 86 5320672 87 5320755 87 5320845 87

5320335 86 5320460 86 5320581 86 5320673 87 5320756 87 5320846 87

5320336 86 5320461 86 5320582 86 5320674 87 5320757 87 5320847 87

5320337 86 5320465 86 5320583 86 5320675 87 5320758 87 5320848 87

5320342 86 5320466 86 5320584 86 5320676 87 5320759 87 5320849 87

5320343 86 5320470 86 5320585 86 5320677 87 5320760 87 5320850 87

5320344 86 5320471 86 5320586 86 5320680 87 5320761 87 5320851 87

5320345 86 5320475 86 5320587 86 5320681 87 5320770 87 5320852 87

5320351 86 5320476 86 5320590 86 5320682 87 5320771 87 5320853 87

5320355 86 5320480 86 5320593 86 5320683 87 5320772 87 5320855 87

5320360 86 5320481 86 5320594 86 5320684 87 5320773 87 5320856 87

5320361 86 5320482 86 5320596 86 5320685 87 5320774 87 5320857 87

5320365 86 5320483 86 5320597 86 5320686 87 5320775 87 5320858 87

5320366 86 5320484 86 5320600 87 5320687 87 5320776 87 5320859 87

5320370 86 5320485 86 5320601 87 5320688 87 5320777 87 5320860 87

5320371 86 5320486 86 5320602 87 5320690 87 5320780 87 5320861 87

5320375 86 5320487 86 5320603 87 5320691 87 5320781 87 5320870 87

5320376 86 5320490 86 5320604 87 5320692 87 5320782 87 5320871 87

5320380 86 5320493 86 5320605 87 5320693 87 5320783 87 5320872 87

5320381 86 5320494 86 5320606 87 5320694 87 5320784 87 5320873 87

5320382 86 5320496 86 5320607 87 5320695 87 5320785 87 5320874 87

5320383 86 5320497 86 5320608 87 5320696 87 5320786 87 5320875 87

5320384 86 5320500 86 5320610 87 5320700 87 5320787 87 5320876 87

5320385 86 5320505 86 5320615 87 5320701 87 5320788 87 5320877 87

5320386 86 5320506 86 5320616 87 5320702 87 5320790 87 5320880 87

5320387 86 5320507 86 5320617 87 5320703 87 5320791 87 5320881 87

5320390 86 5320510 86 5320618 87 5320704 87 5320792 87 5320882 87

5320393 86 5320511 86 5320620 87 5320705 87 5320793 87 5320883 87

5320394 86 5320515 86 5320621 87 5320706 87 5320794 87 5320884 87

5320396 86 5320516 86 5320622 87 5320707 87 5320795 87 5320885 87

5320397 86 5320517 86 5320623 87 5320708 87 5320796 87 5320886 87

5320400 86 5320520 86 5320630 87 5320710 87 5320800 87 5320887 87

5320405 86 5320521 86 5320631 87 5320715 87 5320801 87 5320888 87

5320406 86 5320522 86 5320632 87 5320716 87 5320802 87 5320890 87

5320407 86 5320525 86 5320635 87 5320717 87 5320803 87 5320891 87

5320410 86 5320526 86 5320636 87 5320718 87 5320804 87 5320892 87

5320411 86 5320527 86 5320637 87 5320720 87 5320805 87 5320893 87

5320415 86 5320528 86 5320638 87 5320721 87 5320806 87 5320894 87

5320416 86 5320530 86 5320640 87 5320722 87 5320807 87 5320895 87

5320417 86 5320531 86 5320641 87 5320723 87 5320808 87 5320896 87

5320420 86 5320532 86 5320642 87 5320730 87 5320810 87 5330012 92

5320421 86 5320533 86 5320643 87 5320731 87 5320815 87 5330016 92

5320422 86 5320534 86 5320645 87 5320732 87 5320816 87 5330020 92

5320425 86 5320535 86 5320646 87 5320735 87 5320817 87 5330021 92

5320426 86 5320536 86 5320647 87 5320736 87 5320818 87 5330025 92

5320427 86 5320537 86 5320648 87 5320737 87 5320820 87 5330032 92

229

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

Page 229: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

5330040 92 5507252 103 5507501 108 5507626 108 5508129 107 6000169 143

5330050 92 5507253 103 5507502 108 5507627 108 5508150 107 6000215 143

5330063 92 5507254 103 5507503 108 5507628 108 5508151 107 6000290 143

5330112 92 5507316 103 5507504 108 5507629 108 5508152 107 6000363 143

5330116 92 5507320 103 5507505 108 5507630 108 5508153 107 6000428 143

5330120 92 5507321 103 5507506 108 5507640 108 5508154 107 6000487 143

5330121 92 5507325 103 5507507 108 5507641 108 5508155 107 6004067 143

5330125 92 5507332 103 5507508 108 5507642 108 5510090 26 6004083 143

5330132 92 5507340 103 5507509 108 5507643 108 5510112 26 6004105 143

5330216 92 5507350 103 5507510 108 5507644 108 5510139 26 6004121 143

5330220 92 5507351 103 5507520 108 5507645 108 5510163 26 6004164 143

5330221 92 5507360 103 5507521 108 5507646 108 5510210 26 6004202 143

5330225 92 5507361 103 5507522 108 5507647 108 5510295 26 6004253 143

5330232 92 5507362 103 5507523 108 5507648 108 5510368 26 6004326 143

5330240 92 5507363 103 5507524 108 5507649 108 5511097 26 6004407 143

5330250 92 5507364 103 5507525 108 5507650 108 5511119 26 6004504 143

5330263 92 5507365 103 5507526 108 5507660 108 5511135 26 6004636 143

5400090 172 5507366 103 5507527 108 5507661 108 5511160 26 6008207 145

5400112 172 5507367 103 5507528 108 5507662 108 5511216 26 6008209 145

5400139 172 5507400 109 5507529 108 5507663 108 5511291 26 6008211 145

5400163 172 5507401 109 5507530 108 5507664 108 5511364 26 6008213 145

5400210 172 5507402 109 5507540 108 5507665 108 5512016 18 6008216 145

5400295 172 5507403 109 5507541 108 5507666 108 5512017 18 6008221 145

5507009 103 5507404 109 5507542 108 5507667 108 5512020 18 6008229 145

5507011 103 5507405 109 5507543 108 5507668 108 5512021 18 6008236 145

5507013 103 5507406 109 5507544 108 5507669 108 5512025 18 6008242 145

5507016 103 5507407 109 5507545 108 5507670 108 5512026 18 6008248 145

5507021 103 5507408 109 5507546 108 5507700 109 5512032 18 6010112 145

5507029 103 5507409 109 5507547 108 5507701 109 5512816 19 6010116 145

5507050 103 5507410 109 5507548 108 5507702 109 5512820 19 6010120 145

5507051 103 5507411 109 5507549 108 5507703 109 5512825 19 6010125 145

5507052 103 5507412 109 5507550 108 5507720 109 5512832 19 6010132 145

5507053 103 5507413 109 5507560 108 5507721 109 5512916 19 6010140 145

5507054 103 5507414 109 5507561 108 5507722 109 5512920 19 6010150 145

5507055 103 5507415 109 5507562 108 5507723 109 5512925 19 6010163 145

5507109 103 5507416 109 5507563 108 5507740 109 5512932 19 6011007 144

5507111 103 5507417 109 5507564 108 5507741 109 5808216 107 6011009 144

5507113 103 5507418 109 5507565 108 5507742 109 5808220 107 6011011 144

5507116 103 5507419 109 5507566 108 5507743 109 5808221 107 6011013 144

5507121 103 5507420 109 5507567 108 5507760 109 5808225 107 6011016 144

5507129 103 5507421 109 5507568 108 5507761 109 5808232 107 6011021 144

5507136 103 5507422 109 5507569 108 5507762 109 5808250 107 6011029 144

5507142 103 5507423 109 5507570 108 5507763 109 5808251 107 6011036 144

5507148 103 5507424 109 5507600 108 5508009 107 5808252 107 6011042 144

5507150 103 5507425 109 5507601 108 5508011 107 5808253 107 6011048 144

5507151 103 5507426 109 5507602 108 5508013 107 5808254 107 6011112 144

5507152 103 5507427 109 5507603 108 5508016 107 5808316 107 6011116 144

5507153 103 5507428 109 5507604 108 5508021 107 5808320 107 6011120 144

5507154 103 5507429 109 5507605 108 5508029 107 5808321 107 6011125 144

5507155 103 5507430 109 5507606 108 5508050 107 5808325 107 6011132 144

5507156 103 5507431 109 5507607 108 5508051 107 5808332 107 6011140 144

5507157 103 5507432 109 5507608 108 5508052 107 5808360 107 6011150 144

5507158 103 5507433 109 5507609 108 5508053 107 5808361 107 6011163 144

5507216 103 5507434 109 5507610 108 5508054 107 5808362 107 6100015 151

5507220 103 5507435 109 5507620 108 5508055 107 5808363 107 6100023 151

5507221 103 5507436 109 5507621 108 5508109 107 5808364 107 6100031 151

5507225 103 5507437 109 5507622 108 5508111 107 6000070 143 6100040 151

5507232 103 5507438 109 5507623 108 5508113 107 6000096 143 6100058 151

5507250 103 5507439 109 5507624 108 5508116 107 6000118 143 6100066 151

5507251 103 5507500 108 5507625 108 5508121 107 6000134 143 6100074 151

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

230

Page 230: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

6100082 151 6102465 150 6200095 156 6303525 184 6400400 165 6500374 53

6100090 151 6102470 150 6200109 156 6303532 184 6400401 165 6500382 53

6100104 151 6102475 150 6200117 156 6303540 184 6400402 165 6500390 53

6100112 151 6102480 150 6200125 156 6303550 184 6400403 165 6500404 53

6100120 151 6102485 150 6200133 156 6303563 184 6400404 165 6500412 53

6100139 151 6102490 150 6200141 156 6400019 167 6400405 165 6500420 53

6100147 151 6104106 150 6200150 156 6400027 167 6400406 165 6500439 53

6100155 151 6104108 150 6200168 156 6400035 167 6400407 165 6500447 53

6100163 151 6104110 150 6200176 156 6400043 167 6400408 165 6500455 53

6100171 151 6104206 150 6200184 156 6400051 167 6400409 165 6500463 53

6100180 151 6104208 150 6200212 157 6400060 167 6400410 165 6500471 53

6100198 151 6104210 150 6200216 157 6400078 167 6400411 165 6500480 53

6100201 151 6104212 150 6200220 157 6400086 167 6400412 165 6500490 53

6100210 151 6104416 150 6200225 157 6400094 167 6400413 165 6500501 53

6100228 151 6104525 150 6200232 157 6400108 167 6400414 165 6600077 173

6100236 151 6104632 150 6200240 157 6400116 167 6400415 165 6600093 173

6100260 151 6104716 152 6200250 157 6400124 167 6402020 166 6600115 173

6100317 151 6104720 152 6200263 157 6400132 167 6402038 166 6600131 173

6100416 153 6104725 152 6200310 158 6400140 167 6402046 166 6600166 173

6100421 153 6104726 152 6200312 158 6400175 167 6402054 166 6600212 173

6100429 153 6104727 152 6200316 158 6400180 168 6402055 166 6600298 173

6102018 149 6104732 152 6200320 158 6400182 168 6402060 166 6600360 173

6102026 149 6104733 152 6200325 158 6400183 168 6402062 166 6600425 173

6102030 149 6104740 152 6200332 158 6400191 168 6402070 166 6600484 173

6102034 149 6104750 152 6200340 158 6400205 168 6402072 166 6600800 173

6102042 149 6104763 152 6200350 158 6400210 168 6402087 166 6600801 173

6102050 149 6104764 152 6200363 158 6400213 168 6402089 166 6600802 173

6102069 149 6104770 152 6200410 158 6400221 168 6402091 166 6600803 173

6102077 149 6104771 152 6200412 158 6400228 168 6402097 166 6600804 173

6102085 149 6104772 152 6200416 158 6400230 168 6402099 166 6600805 173

6102093 149 6104773 152 6200420 158 6400248 168 6402100 166 6600806 173

6102107 149 6104774 152 6200425 158 6400256 168 6402102 166 6600807 173

6102115 149 6104775 152 6200432 158 6400264 168 6402119 166 6604072 160

6102123 149 6104776 152 6200440 158 6400272 168 6500102 53 6604099 160

6102131 149 6104777 152 6200450 158 6400280 168 6500110 53 6604110 160

6102140 149 6104778 152 6200463 158 6400299 168 6500129 53 6604137 160

6102158 149 6104779 152 6300006 185 6400302 168 6500137 53 6604161 160

6102166 149 6104780 152 6300014 185 6400310 168 6500145 53 6604218 160

6102182 149 6104816 153 6300022 185 6400345 168 6500153 53 6604293 160

6102190 149 6104819 153 6300049 185 6400350 169 6500161 53 6604366 160

6102204 149 6104820 153 6300065 185 6400351 169 6500170 53 6604420 160

6102212 149 6104824 153 6300073 185 6400352 169 6500188 53 6604480 160

6102220 149 6104825 153 6300081 185 6400353 169 6500196 53 6604501 160

6102239 149 6104831 153 6300090 185 6400354 169 6500200 53 6604510 160

6102241 149 6104832 153 6300412 185 6400355 169 6500218 53 6604528 160

6102247 149 6104839 153 6300416 185 6400356 169 6500226 53 6604536 160

6102255 149 6104840 153 6300420 185 6400357 169 6500234 53 6604544 160

6102258 149 6104849 153 6300425 185 6400358 169 6500242 53 6604552 160

6102400 150 6104850 153 6300432 185 6400359 169 6500250 53 6604560 160

6102404 150 6104862 153 6303099 184 6400360 169 6500269 53 6604579 160

6102405 150 6104863 153 6303110 184 6400361 169 6500277 53 6604587 160

6102410 150 6104875 153 6303137 184 6400362 169 6500285 53 6604595 160

6102415 150 6200010 156 6303161 184 6400363 169 6500293 53 6604658 163

6102420 150 6200028 156 6303218 184 6400364 169 6500307 53 6604659 164

6102425 150 6200036 156 6303293 184 6400365 169 6500315 53 6604660 163

6102430 150 6200044 156 6303366 184 6400366 169 6500323 53 6604661 163

6102435 150 6200052 156 6303420 184 6400367 169 6500331 53 6604662 163

6102450 150 6200060 156 6303480 184 6400368 169 6500340 53 6604663 163

6102455 150 6200079 156 6303516 184 6400369 169 6500358 53 6604664 163

6102460 150 6200087 156 6303520 184 6400370 169 6500366 53 6604665 164

231

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

Page 231: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

6604666 163 6604742 163 6606423 161 6702521 180 7004028 154 7005237 146

6604667 163 6604743 164 6606482 161 6702529 180 7004036 154 7005245 146

6604668 163 6604750 163 6606504 161 6702536 180 7004044 154 7005301 147

6604669 163 6604751 164 6606512 161 6702542 180 7004052 154 7005302 147

6604670 164 6604752 163 6606520 161 6702548 180 7004060 154 7005303 147

6604671 164 6604753 164 6606539 161 6702712 180 7004079 154 7005304 147

6604672 163 6604763 163 6606547 161 6702716 180 7004087 154 7005305 147

6604673 164 6604764 163 6606555 161 6702720 180 7004095 154 7005306 147

6604674 163 6604770 163 6606563 161 6702725 180 7004200 155 7005307 147

6604675 163 6604771 163 6606571 161 6702732 180 7004201 155 7005308 147

6604676 163 6604772 163 6606580 161 6702740 180 7004202 155 7005309 147

6604677 164 6604773 163 6700071 181 6702750 180 7004203 155 7005310 147

6604678 163 6604774 163 6700098 181 6702763 180 7004204 155 7005311 147

6604679 164 6604775 163 6700110 181 6702812 180 7004205 155 7005312 147

6604680 164 6604776 163 6700136 181 6702816 180 7004206 155 7005313 147

6604681 163 6604777 163 6700160 181 6702820 180 7004207 155 7005314 147

6604682 164 6604807 162 6700217 181 6702825 180 7004208 155 7005315 147

6604683 164 6604808 162 6700292 181 6702832 180 7004300 155 7005316 147

6604684 164 6604809 162 6700365 181 6702840 180 7004301 155 7005317 147

6604685 163 6604810 162 6700420 181 6702850 180 7004302 155 7005318 147

6604686 164 6604811 162 6700489 181 6702863 180 7004303 155 7005319 147

6604687 164 6604812 162 6700507 182 7001070 141 7004304 155 7005320 147

6604688 164 6604813 162 6700509 182 7001096 141 7004305 155 7005321 147

6604689 163 6604814 162 6700511 182 7001118 141 7004306 155 7005322 147

6604690 164 6604815 162 6700513 182 7001134 141 7004310 155 7005323 147

6604691 164 6604816 162 6700516 182 7001169 141 7004311 155 7005324 147

6604692 163 6604817 162 6700521 182 7001215 141 7004312 155 7006012 194

6604693 164 6604818 162 6700529 182 7001290 141 7004313 155 7006020 194

6604694 163 6604819 162 6700536 182 7001428 141 7004314 155 7006039 194

6604695 163 6604820 162 6700542 182 7001487 141 7004315 155 7006047 194

6604703 164 6604821 162 6700548 182 7001600 141 7004316 155 7006055 194

6604704 164 6604822 162 6700612 182 7001601 141 7004320 155 7006063 194

6604705 164 6604823 162 6700616 182 7001602 141 7004321 155 7006071 194

6604706 164 6604829 162 6700620 182 7001603 141 7004322 155 7006080 194

6604707 164 6604830 162 6700625 182 7001604 141 7004323 155 7006098 194

6604708 163 6604831 162 6700632 182 7001605 141 7004324 155 7006101 194

6604709 163 6604832 162 6700640 182 7001606 141 7004325 155 7006207 194

6604712 163 6604836 162 6700650 182 7001608 141 7004326 155 7006209 194

6604713 164 6604837 162 6700663 182 7001609 141 7005016 146 7006211 194

6604715 163 6604842 162 6701108 181 7002076 177 7005024 146 7006213 194

6604716 163 6604843 162 6701116 181 7002092 177 7005032 146 7006216 194

6604717 163 6604848 162 6701124 181 7002114 177 7005040 146 7006221 194

6604719 164 6604849 162 6701140 181 7002130 177 7005059 146 7006229 194

6604720 163 6604850 162 6701205 181 7002165 177 7005067 146 7006236 194

6604721 163 6604863 162 6701345 181 7002211 177 7005075 146 7006242 194

6604722 163 6604865 162 6701388 181 7002297 177 7005083 146 7006248 194

6604723 164 6604869 162 6701582 181 7002360 177 7005091 146 7006812 187

6604724 164 6604872 162 6701612 181 7002424 177 7005105 146 7006816 187

6604725 163 6604875 162 6701616 181 7002483 177 7005113 146 7006820 187

6604726 163 6604877 162 6701620 181 7003072 170 7005121 146 7006825 187

6604727 163 6604879 162 6701625 181 7003099 170 7005130 146 7006832 187

6604728 164 6604882 162 6701632 181 7003110 170 7005148 146 7006840 187

6604729 163 6606075 161 6701640 181 7003137 170 7005156 146 7006850 187

6604730 164 6606091 161 6701650 181 7003161 170 7005164 146 7006863 187

6604732 163 6606113 161 6701663 181 7003218 170 7005172 146 7006870 187

6604733 164 6606130 161 6702507 180 7003293 170 7005180 146 7006871 187

6604734 163 6606164 161 6702509 180 7003366 170 7005199 146 7006872 187

6604735 164 6606210 161 6702511 180 7003420 170 7005202 146 7006873 187

6604740 163 6606296 161 6702513 180 7003480 170 7005210 146 7006874 187

6604741 164 6606369 161 6702516 180 7004010 154 7005229 146 7006875 187

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

232

Page 232: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

7006876 187 7205481 171 7211132 142 7211887 140 7215487 178 7217702 78

7006877 187 7208073 159 7211485 140 7211888 140 7215517 179 7217703 78

7008020 148 7208090 159 7211486 140 7211889 140 7215525 179 7302096 183

7008030 148 7208111 159 7211487 140 7211890 140 7215533 179 7302118 183

7008031 148 7208138 159 7211488 140 7211969 140 7215541 179 7302134 183

7008040 148 7208162 159 7211490 140 7211970 140 7215550 179 7302169 183

7008041 148 7208219 159 7211491 140 7211971 140 7215568 179 7302215 183

7008042 148 7208294 159 7211492 140 7211972 140 7215576 179 7302290 183

7008044 148 7208367 159 7211493 140 7211973 140 7215584 179 7302363 183

7008045 148 7208421 159 7211495 140 7211974 140 7215592 179 7302425 183

7008046 148 7211007 142 7211496 140 7211975 140 7215606 179 7303076 25

7008050 148 7211009 142 7211497 140 7211976 140 7217012 178 7303092 25

7008051 148 7211011 142 7211498 140 7211977 140 7217016 178 7303114 25

7008052 148 7211013 142 7211707 140 7211978 140 7217020 178 7303130 25

7008060 148 7211016 142 7211709 140 7211979 140 7217025 178 7303165 25

7008061 148 7211021 142 7211711 140 7211980 140 7217032 178 7303211 25

7008062 148 7211029 142 7211713 140 7211981 140 7217040 178 7303212 25

7008220 148 7211035 142 7211716 140 7211982 140 7217050 178 7303297 25

7008230 148 7211036 142 7211721 140 7211983 140 7217063 178 7303360 25

7008231 148 7211037 142 7211729 140 7211984 140 7217112 178 7303483 25

7008240 148 7211038 142 7211751 140 7211985 140 7217116 178 7303503 25

7008241 148 7211039 142 7211752 140 7211986 140 7217120 178 7303505 25

7008242 148 7211040 142 7211753 140 7211987 140 7217125 178 7303513 25

7008244 148 7211041 142 7211754 140 7211988 140 7217132 178 7303521 25

7008245 148 7211042 142 7211755 140 7211989 140 7217140 178 7303530 25

7008246 148 7211043 142 7211756 140 7211990 140 7217150 178 7303548 25

7008250 148 7211044 142 7211757 140 7211991 140 7217163 178 7303549 25

7008251 148 7211050 142 7211765 140 7211992 140 7217212 178 7303556 25

7008252 148 7211051 142 7211766 140 7212012 142 7217216 178 7303564 25

7008260 148 7211052 142 7211767 140 7212016 142 7217220 178 7303572 25

7008261 148 7211053 142 7211768 140 7212020 142 7217225 178 7303712 25

7008262 148 7211054 142 7211769 140 7212025 142 7217232 178 7303716 25

7008516 148 7211055 142 7211770 140 7212032 142 7217240 178 7303717 25

7008520 148 7211056 142 7211771 140 7212040 142 7217250 178 7303718 25

7008525 148 7211060 142 7211807 140 7212050 142 7217263 178 7303720 25

7008532 148 7211061 142 7211809 140 7212063 142 7217312 179 7303721 25

7008540 148 7211062 142 7211811 140 7212112 142 7217316 179 7303725 25

7008550 148 7211063 142 7211813 140 7212116 142 7217320 179 7303726 25

7008563 148 7211064 142 7211816 140 7212120 142 7217325 179 7303732 25

7008616 148 7211065 142 7211821 140 7212125 142 7217332 179 7303733 25

7008620 148 7211066 142 7211829 140 7212132 142 7217340 179 7303812 25

7008625 148 7211067 142 7211836 140 7212140 142 7217350 179 7303816 25

7008632 148 7211068 142 7211842 140 7212150 142 7217363 179 7303817 25

7008640 148 7211069 142 7211848 140 7212163 142 7217412 179 7303818 25

7008650 148 7211075 142 7211851 140 7212212 142 7217416 179 7303820 25

7008663 148 7211076 142 7211852 140 7212216 142 7217420 179 7303821 25

7008716 148 7211077 142 7211853 140 7212220 142 7217425 179 7303825 25

7008720 148 7211078 142 7211854 140 7212225 142 7217432 179 7303826 25

7008725 148 7211079 142 7211855 140 7212232 142 7217440 179 7303832 25

7008732 148 7211080 142 7211856 140 7212250 142 7217450 179 7303833 25

7008740 148 7211081 142 7211857 140 7212263 142 7217463 179 7304001 31

7008750 148 7211107 142 7211858 140 7215070 178 7217512 179 7304002 31

7008763 148 7211109 142 7211859 140 7215096 178 7217516 179 7304003 31

7205074 171 7211111 142 7211860 140 7215118 178 7217520 179 7304004 31

7205090 171 7211113 142 7211881 140 7215134 178 7217525 179 7304005 31

7205112 171 7211116 142 7211882 140 7215169 178 7217532 179 7304006 31

7205139 171 7211121 142 7211883 140 7215215 178 7217540 179 7304007 31

7205163 171 7211129 142 7211884 140 7215290 178 7217550 179 7304008 31

7205210 171 7211130 142 7211885 140 7215363 178 7217563 179 7304009 31

7205368 171 7211131 142 7211886 140 7215428 178 7217701 78 7304011 31

233

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

Page 233: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page Art.no. page

7304015 31 7320820 16 8103151 190 8112609 27 8122516 23 8221536 22

7304016 31 7320825 16 8103160 190 8112610 27 8122521 23 8221548 22

7304017 31 7320832 16 8103186 190 8112630 188 8122529 23 8222016 22

7304021 31 7320840 16 8103194 190 8112675 188 8122536 23 8222021 22

7304022 31 7320850 16 8103208 190 8113301 189 8122548 23 8222029 22

7304116 31 7321155 15 8103216 190 8113302 189 8218102 27 8222036 22

7304117 31 7321160 15 8103232 190 8113303 189 8218110 27 8222048 22

7304118 31 7321165 15 8103240 190 8113304 189 8218113 27 8222116 22

7304119 31 7321170 15 8103259 190 8113305 189 8218117 27 8222121 22

7304120 31 7321555 15 8103275 190 8113306 189 8218123 27 8222129 22

7304121 31 7321560 15 8103283 190 8113307 189 8218129 27 8222136 22

7304125 31 7321565 15 8103291 190 8113308 189 8218130 27 8222148 22

7304126 31 7321570 15 8103305 190 8113309 189 8218137 27 8320008 202

7304127 31 7321725 15 8103321 190 8113310 189 8218140 27 8320009 202

7304128 31 7321732 15 8103330 190 8113490 189 8218150 27 8320010 202

7304132 31 7321740 15 8103356 190 8113491 189 8218170 27 8320012 202

7304133 31 7321750 15 8107092 191 8113492 189 8218234 27 8320014 202

7304134 31 7321825 15 8107114 191 8113493 189 8218293 27 8320016 202

7304135 31 7321832 15 8107130 191 8113494 189 8218374 27 8320020 202

7310099 26 7321840 15 8107165 191 8113495 189 8218501 27 8320030 202

7310110 26 7321850 15 8107211 191 8113496 189 8221007 21 8320031 202

7310137 26 7322016 17 8107297 191 8113497 189 8221009 21 8320032 202

7310161 26 7322021 17 8107360 191 8113498 189 8221011 21 8320033 202

7310218 26 7322029 17 8107424 191 8115010 193 8221016 21 8320034 202

7310293 26 7322036 17 8107483 191 8115028 193 8221021 21 8320035 202

7310366 26 7322048 17 8110026 192 8115036 193 8221029 21 8320036 202

7311095 26 7322116 17 8110050 192 8115044 193 8221036 21 8320046 202

7311117 26 7322121 17 8110085 192 8115052 193 8221048 21 8320048 202

7311133 26 7322129 17 8110093 192 8115060 193 8221107 21 8320050 202

7311168 26 7322136 17 8110107 192 8115079 193 8221109 21 8320052 202

7311214 26 7322148 17 8110115 192 8115087 193 8221111 21 8320054 202

7311290 26 8101078 118 8110123 192 8115095 193 8221116 21 8320056 202

7311362 26 8101094 118 8110131 192 8115109 193 8221121 21 8320058 202

7320212 16 8101116 118 8110166 192 8121107 20 8221129 21 8320060 202

7320216 16 8101132 118 8110174 192 8121109 20 8221136 21 8320062 202

7320217 16 8101167 118 8110182 192 8121111 20 8221148 21 8320063 202

7320220 16 8101213 118 8110190 192 8121116 20 8221207 21 8320072 202

7320225 16 8101299 118 8110204 192 8121121 20 8221209 21 8320074 202

7320232 16 8101361 118 8112070 188 8121129 20 8221211 21 8320076 202

7320240 16 8101421 118 8112096 188 8121136 20 8221216 21 8320078 202

7320245 16 8101485 118 8112118 188 8121148 20 8221221 21 8320079 202

7320263 16 8101516 118 8112134 188 8121207 20 8221229 21 8320080 202

7320612 16 8101520 118 8112169 188 8121209 20 8221236 21 8320081 202

7320616 16 8101525 118 8112215 188 8121211 20 8221248 21 8320082 202

7320617 16 8101532 118 8112250 188 8121216 20 8221307 21 8320084 202

7320620 16 8101540 118 8112290 188 8121221 20 8221309 21 8320086 202

7320625 16 8101550 118 8112320 188 8121229 20 8221311 21 8320090 202

7320632 16 8101563 118 8112363 188 8121236 20 8221316 21 8320091 202

7320640 16 8103011 190 8112400 188 8121248 20 8221321 21 8320093 202

7320645 16 8103020 190 8112428 188 8122007 20 8221329 21 8320094 202

7320663 16 8103038 190 8112500 188 8122009 20 8221336 21 8320095 202

7320712 16 8103054 190 8112600 27 8122011 20 8221348 21 8320096 202

7320716 16 8103062 190 8112601 27 8122016 20 8221416 22 8320097 202

7320720 16 8103070 190 8112602 27 8122021 20 8221421 22 8320098 202

7320725 16 8103089 190 8112603 27 8122029 20 8221429 22 8320099 202

7320732 16 8103097 190 8112604 27 8122036 20 8221436 22 8320201 202

7320740 16 8103119 190 8112605 27 8122048 20 8221448 22 8320202 202

7320750 16 8103127 190 8112606 27 8122507 23 8221516 22 8320203 202

7320812 16 8103135 190 8112607 27 8122509 23 8221521 22 8320204 202

7320816 16 8103143 190 8112608 27 8122511 23 8221529 22 8320205 202

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

234

Page 234: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Art.-Nr. Seite Art.-Nr. Seite Art.-Nr. Seite

Art.no. page Art.no. page Art.no. page

8320206 202 8320324 202 9001563 13

8320207 202 8320325 202 9001564 13

8320217 202 8320326 202 9001566 13

8320218 202 8320327 202 9001567 13

8320219 202 8320328 202 9001800 23

8320220 202 8320329 202 9001812 23

8320221 202 8320330 202 9001816 23

8320222 202 8320331 202 9001820 23

8320223 202 8320332 202 9001825 23

8320230 202 8320333 202 9001832 23

8320231 202 8320334 202 9001840 23

8320232 202 8320335 202 9001850 23

8320233 202 8320336 202

8320234 202 8320337 202

8320235 202 8320338 202

8320236 202 8320340 202

8320237 202 8320400 204

8320238 202 8320401 204

8320239 202 8320410 204

8320246 202 8320411 204

8320247 202 8320412 204

8320248 202 8320413 204

8320249 202 8320414 204

8320250 202 8320415 204

8320260 202 8320420 205

8320261 202 8320430 205

8320262 202 8320431 205

8320263 202 8320451 203

8320264 202 8320452 203

8320265 202 8320453 203

8320266 202 8320454 203

8320275 202 8320460 203

8320276 202 8320470 206

8320277 202 8320471 206

8320278 202 8320472 206

8320279 202 8320473 206

8320280 202 8320520 207

8320281 202 8320530 207

8320301 202 8320531 207

8320302 202 8320532 207

8320303 202 8320533 207

8320304 202 8320534 207

8320305 202 8320535 207

8320306 202 8500096 59

8320307 202 8500118 59

8320308 202 8500134 59

8320309 202 8500169 59

8320310 202 8500215 59

8320311 202 8500290 59

8320312 202 8500363 59

8320313 202 8500428 59

8320314 202 8500487 59

8320315 202 9001551 13

8320316 202 9001552 13

8320317 202 9001554 13

8320318 202 9001555 13

8320319 202 9001557 13

8320321 202 9001558 13

8320322 202 9001560 13

8320323 202 9001561 13

235

Artik

el-N

r. Ve

rzei

chni

sAr

ticle

Num

ber I

ndex

Page 235: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

236

Für Ihre Notizen / For your notes

Page 236: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

237

Für Ihre Notizen / For your notes

Page 237: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

238

Für Ihre Notizen / For your notes

Page 238: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

1. Geltungsbereich1.1 Diese Verkaufs- und Lieferbedingungen gelten im Rechtsverkehr der Schlemmer GmbH mit

Unternehmen, juristischen Personen des öffentlichen Rechts und öffentlich-rechtlichen Son-dervermögen.

1.2 Angebote, Lieferungen und Leistungen der Schlemmer GmbH erfolgen ausschließlich aufgrunddieser Verkaufs- und Lieferbedingungen. Abweichende, entgegenstehende oder ergänzende All-gemeine Geschäftsbedingungen werden, selbst bei Kenntnis, nicht Vertragsbestandteil, es seidenn, ihrer Geltung wird ausdrücklich zugestimmt.

1.3 Mündliche Nebenabreden bestehen nicht.

2. Angebote / Vertragsschluss2.1 Die Angebote der Schlemmer GmbH sind stets freibleibend und unverbindlich. Technische und

gestalterische Abweichungen von Beschreibungen und Angaben in Prospekten, Katalogen undschriftlichen Unterlagen sowie Modell-, Konstruktions- und Materialänderungen im Zuge destechnischen Fortschritts bleiben im Rahmen des Zumutbaren vorbehalten.Unsere Muster sind unverbindliche Ansichtsmuster von allgemeinem Charakter und in keinerWeise für bestimmte Eigenschaften bindend.

2.2 Mit der Auftragserteilung erklärt der Käufer verbindlich, einen entsprechenden Vertragschließen zu wollen. Die Schlemmer GmbH ist berechtigt, das darin liegende Vertragsangebotinnerhalb von zwei Wochen nach Eingang anzunehmen, wenn in dem Auftrag nicht eine län-gere Frist genannt ist. Die Annahme kann entweder schriftlich oder durch Auslieferung der Warean den Käufer erklärt werden. Ein Vertrag kommt erst durch die Annahme des Vertragsangebo-tes durch die Schlemmer GmbH zustande.

2.3 Der Vertragsschluss erfolgt unter dem Vorbehalt der richtigen und rechtzeitigen Selbstbelieferungdurch die Zulieferer der Schlemmer GmbH. Dies gilt nur für den Fall, dass die Nichtlieferung nichtvon der Schlemmer GmbH zu vertreten ist, insbesondere bei Abschluss eines kongruentenDeckungsgeschäftes mit dem Zulieferer. Der Käufer wird über die Nichtverfügbarkeit der Leistungumgehend informiert. Eine bereits erbrachte Gegenleistung wird umgehend zurückerstattet.

2.4 Die Angebote und sämtliche Anlagen (insbesondere Pläne, Zeichnungen, Darstellungen, techni-sche Angaben, Preislisten) sind stets vertraulich zu behandeln. Eine Weitergabe an Dritte ist nurnach ausdrücklicher schriftlicher Genehmigung der Schlemmer GmbH zulässig. Die Geheim-haltungspflicht besteht nicht bzw. entfällt bei Informationen, welche dem Kunden bereits vorherbekannt waren oder die öffentlich bekannt gemacht worden sind, ohne dass eine Vertragsver-letzung des Käufers hierfür ursächlich war.

3. Lieferzeit, Gefahrübergang und Versand3.1 Die Angabe von Lieferzeiten erfolgt stets unverbindlich, soweit nichts Gegenteiliges vereinbart

ist. Der Beginn der von der Schlemmer GmbH angegebenen Lieferzeit setzt die Erfüllung sämt-licher Mitwirkungspflichten seitens des Käufers voraus.

3.2 Die Angaben von Lieferzeiten erfolgt unter dem Vorbehalt der richtigen und rechtzeitigenSelbstbelieferung durch Zulieferer der Schlemmer GmbH. Nr. 2.3 dieser Verkaufs- und Liefer-bedingungen gelten entsprechend.

3.3 Bei Verträgen, welche eine fortlaufende Auslieferung vorsehen, sind Abruf und Einteilung fürungefähr gleiche Monatsmengen vom Käufer spätestens vier Wochen vor Beginn des jeweiligenLiefermonats bekannt zu geben. Wird nicht rechtzeitig abgerufen oder eingeteilt, so ist dieSchlemmer GmbH nach angemessener Nachfristsetzung berechtigt, selbst einzuteilen und dieWare durch Lieferung tatsächlich anzubieten. Nimmt der Käufer die Waren nicht ab, gilt dies alsLossagung des Käufers vom Vertrag. Die Schlemmer GmbH kann dann die ihr zustehendenRechte wegen Pflichtverletzung geltend machen.

3.4 Die Gefahr des zufälligen Unterganges und der zufälligen Verschlechterung der Ware geht mitdem Zeitpunkt der abgeschlossenen Verladung auf dem Lkw auf den Käufer über.

3.5 Verzögert sich die Versendung trotz Versandbereitschaft aus Gründen, welche der Käufer zuvertreten hat, erfolgt der Gefahrübergang mit der Anzeige der Versandbereitschaft. Lager-kosten ab Versandbereitschaft trägt der Käufer.

3.6 Kommt der Besteller außerhalb der Regel 3.3 in Annahmeverzug, so ist die Schlemmer GmbHberechtigt, den ihr entstehenden Schaden einschließlich etwaiger Mehraufwendungen zu ver-langen. In diesem Fall geht auch die Gefahr eines zufälligen Unterganges oder einer zufälligenVerschlechterung des Vertragsgegenstandes in dem Zeitpunkt auf den Käufer über, in dem die-ser in Annahmeverzug gerät.

3.7.1 Die Versicherung der Ware gegen Transportschäden und sonstige Risiken, erfolgt, falls nichtsanderes vereinbart wird, nur auf ausdrücklichen Wunsch und auf Kosten des Käufers.

3.7.2 Versandart und Verpackung unterstehen, wenn nicht ausdrücklich etwas anderes vereinbartwird, dem Ermessen der Schlemmer GmbH.

3.7.3 Soweit nicht anderes vereinbart, erfolgt die Lieferung ab Werk.3.7.4 Im Übrigen gelten die ‚Incoterms 2000’.3.8 Die Schlemmer GmbH ist zu Teillieferungen in zumutbarem Umfang berechtigt. Insoweit berech-

tigt der Verzug mit einer Teillieferung nicht zur Verweigerung der Abnahme anderer Teillieferung.3.9.1 Warenrücksendungen auf Wunsch des Kunden können nur akzeptiert werden, wenn die

Schlemmer GmbH diesen schriftlich zugestimmt hat, die Ware original verpackt ist und dieWare dem aktuellen Zeichnungs- und Entwicklungstand entspricht.

3.9.2 In diesem Fall wird aufgrund des Bearbeitungsaufwandes eine Bearbeitungsgebühr in Höhe von20% des Warenwertes, aber mindestens 125 € erhoben.

3.9.3 Rücksendungen ohne schriftliche Zustimmung der Schlemmer GmbH werden verweigert undunfrei an den Absender retourniert.

4. Preise4.1 Alle Preise verstehen sich, soweit nichts anderes vereinbart ist,

- ab Werk,- zuzüglich Verpackung und Versandkosten,- zuzüglich gesetzlicher Mehrwertsteuer bei Verkäufen innerhalb der BundesrepublikDeutschland.

4.2 Die Preise verstehen sich, soweit nichts anderes vereinbart ist, in Euro per 100 Stück bzw. 100Meter.

4.3 Bei Rechnungen mit einem Nettowarenwert unter 50 € wird ein Mindermengenzuschlag von 15€ berechnet.

4.4 Treten nach Abschluss des Liefervertrages außergewöhnliche Erhöhungen der Kosten, z.B. fürRohstoffe, Energie, Löhne oder Frachten bei der Schlemmer GmbH oder ihren Lieferanten ein,und führen diese zu einer Erhöhung der Einkaufspreise oder Selbstkosten der SchlemmerGmbH, so ist diese berechtigt, nach Ablauf einer Bindungsfrist von vier Wochen von dem Käu-fer Verhandlungen über eine angemessene Preisanpassung zu verlangen. Kommt eine Überein-kunft nicht zustande, so ist die Schlemmer GmbH für den noch nicht ausgeführten Teil des Lie-fervertrages von der Lieferpflicht entbunden.

4.5 Unsere Messingerzeugnisse sind auf der Messing-Notierungsbasis von 155,– € für MS 58 kalkuliert. Je 13,– € nach oben oder unten bedingen 5 Prozent Auf- oder Abschlag, z.B.:€ 142,– bis € 167,99 0 Prozent MTZ € 168,– bis € 180,99 5 Prozent MTZ € 181,– bis € 193,99 10 Prozent MTZ € 194,– bis € 206,99 15 Prozent MTZ € 207,– bis € 219,99 20 Prozent MTZ usw.

5. Gewährleistung5.1 Die Gewährleistungsfrist beträgt ein Jahr ab Ablieferung der Sache. Dies gilt nicht, wenn im

Einzelfall eine andere Vereinbarung getroffen wurde bzw. der Schlemmer GmbH Arglist vor-werfbar ist. Die Pflicht zur Anzeige von Mängeln (Ziffer 5.6) bleibt unberührt.

5.2 Werden Betriebs- oder Wartungshinweise nicht befolgt, Änderungen an den Produkten vorge-nommen, Teile ausgewechselt oder Verbrauchsmaterialien verwendet, die nicht den Original-spezifikationen entsprechen, entfällt jede Gewährleistung, es sei denn, dass der Mangel nach-weislich nicht durch den unsachgemäßen Gebrauch oder Eingriff verursacht worden ist.

5.3 Zur Beschaffenheit der Ware zählen grundsätzlich nur Eigenschaften, die der Käufer aufgrundder Äußerungen der Schlemmer GmbH oder aufgrund der Produktbeschreibung des Herstellerserwarten kann, es sei denn, dass die Schlemmer GmbH diese Äußerungen nicht kannte undauch nicht kennen musste, dass sie im Zeitpunkt des Vertragsschlusses in gleichwertiger Weiseberichtigt waren oder dass sie die Kaufentscheidung nicht beeinflussen konnten. Andere Äuße-rungen des Herstellers, insbesondere in der Werbung, stellen daneben keine vertragsgemäßeBeschaffenheitsangabe der Ware dar.

5.4 Erhält der Käufer eine mangelhafte Montageanleitung, so ist die Schlemmer GmbH lediglich zurLieferung einer mangelfreien Montageanleitung verpflichtet und dies auch nur dann, wenn derMangel der Montageanleitung der ordnungsgemäßen Montage entgegensteht.

5.5 Garantien im Rechtssinne erhält der Käufer durch die Schlemmer GmbH nicht. Herstellergaran-tien bleiben davon unberührt.

5.6 Der Käufer hat die Ware unverzüglich, spätestens jedoch innerhalb von 14 Tagen nach der Ablie-ferung durch die Schlemmer GmbH zu untersuchen und, wenn sich ein Mangel zeigt, derSchlemmer GmbH unverzüglich Anzeige zu machen. Nicht offensichtliche Mängel sind unver-züglich, spätestens jedoch 14 Tage nach Entdeckung, schriftlich anzuzeigen. Zur Fristwahrunggenügt die rechtzeitige Absendung. Bei Verletzung der Anzeigenobliegenheiten ist die Geltendmachung des Gewährleistungsan-spruches ausgeschlossen. Den Käufer trifft die volle Beweislast für sämtliche Anspruchsvor-aussetzungen, insbesondere für den Mangel selbst, für den Zeitpunkt der Feststellung des Man-gels und für die Rechtzeitigkeit der Mängelrüge.

5.7 Die Gewährleistung erfolgt nach der Wahl der Schlemmer GmbH durch Beseitigung des Man-gels oder Lieferung einer mangelfreien Sache. Schlägt eine solche Nacherfüllung fehl, so kannder Käufer grundsätzlich nach seiner Wahl Herabsetzung der Vergütung (Minderung) verlangenoder von dem Vertrag zurücktreten. Bei nur geringfügiger Vertragswidrigkeit, insbesondere beinur geringfügigen Mängeln, steht dem Käufer jedoch kein Rücktrittsrecht zu.

5.8 Zur Durchführung der Nacherfüllung kann die Schlemmer GmbH nach ihrer Wahl verlangen,dass der Käufera) die schadhafte Ware zur Reparatur auf seine Kosten an die Schlemmer GmbH schickt,oderb) sie bereithält, so dass ein von der Schlemmer GmbH beauftragter Servicetechniker nachAbsprache mit dem Käufer die Reparatur vornehmen kann.

5.9 Wählt der Käufer nach gescheiterter Nacherfüllung den Rücktritt vom Vertrag, so steht ihmdaneben kein Schadensersatzanspruch wegen des Mangels zu. Wählt der Käufer nach geschei-terter Nacherfüllung Schadensersatz, so verbleibt die Ware beim Käufer, sofern ihm dies zumut-bar ist. Der Schadensersatz beschränkt sich auf die Differenz zwischen Kaufpreis und Wert der man-gelhaften Sache. Dies gilt nur dann nicht, wenn die Schlemmer GmbH den Mangel arglistig ver-ursacht hat.

6. Haftungsbeschränkungen, Abtretungen6.1 Die Schlemmer GmbH haftet nicht bei leicht fahrlässiger Verletzung unwesentlicher Vertrags-

pflichten. Im übrigen beschränkt sich ihre Haftung bei leicht fahrlässigen Pflichtverletzungenauf den nach Art der Ware vorhersehbaren, vertragstypischen Schaden. Dies gilt auch bei leichtfahrlässigen Pflichtverletzungen der gesetzlichen Vertreter oder Erfüllungsgehilfen der Schlem-mer GmbH.

6.2 Die vorstehende Haftungsbeschränkung betreffen nicht Ansprüche des Käufers aus Produkt-haftung. Weiter gelten die Haftungsbeschränkungen nicht bei Körper- und Gesundheitsschädenoder bei Verlust des Lebens, soweit diese der Schlemmer GmbH zurechenbar sind.

7. Eigentumsvorbehalt7.1 Die Schlemmer GmbH behält sich das Eigentum an den gelieferten Waren bis zur vollständigen

Bezahlung aller ihr zustehenden und noch entstehenden Forderungen aus der laufendenGeschäftsbeziehung, gleich aus welchem Rechtsgrund, vor.

7.2 Bis zur Erlöschung des Eigentumsvorbehaltes darf der Käufer die gelieferte Ware und die ausihrer Verarbeitung entstehenden Gegenstände nur im ordnungsgemäßen Geschäftsverkehr,nicht jedoch über Kontokorrente, veräußern.Der Käufer darf die unter Eigentumsvorbehalt stehende Ware (Vorbehaltsware) nicht siche-rungsübereignen oder verpfänden.

7.3 Erlischt das der Schlemmer GmbH zustehende Eigentum durch Verarbeitung, so erwirbt sie ander neuen Sache das Miteigentum im Verhältnis des Wertes der von ihr gelieferten Ware zu densonstigen verarbeiteten Gegenständen. Das gleiche gilt im Falle der Verbindung mit anderen,nicht der Schlemmer GmbH gehörenden Gegenständen.

7.4 Der Käufer ist verpflichtet, die Vorbehaltsware pfleglich zu behandeln und ausreichend gegendie üblichen Gefahren zu versichern.

7.5 Der Käufer ist berechtigt, die Vorbehaltsware im ordentlichen Geschäftsgang weiter zu ver-äußern. Er tritt der Schlemmer GmbH bereits jetzt alle Forderungen in Höhe des Rechnungsbe-trages ab, die ihm durch die Weiterveräußerung gegen einen Dritten erwachsen. Die Schlem-mer GmbH nimmt die Abtretung an. Sie ermächtigt den Käufer, die Forderung einzuziehen. DieSchlemmer GmbH behält sich vor, die Ermächtigung zu widerrufen und die Forderung selbsteinzuziehen, sobald der Käufer seinen Zahlungsverpflichtungen nicht ordnungsgemäß nach-kommt und in Zahlungsverzug gerät. In diesem Falle hat der Käufer die Abtretung offen zu legenund die erforderlichen Auskünfte und Unterlagen zu erteilen und vorzulegen.

7.6 Der Käufer ist verpflichtet, der Schlemmer GmbH einen Zugriff Dritter auf die Vorbehaltsware,etwa im Falle einer Pfändung, sowie etwaige Beschädigungen oder die Vernichtung der Wareunverzüglich mitzuteilen und alle keinen Aufschub duldenden Maßnahmen zur Sicherung derForderungen und Rechte der Schlemmer GmbH zu treffen. Einen Besitzwechsel der Vorbe-haltsware sowie den Wechsel seines Unternehmenssitzes hat der Käufer unverzüglich anzuzei-gen.

7.7 Bei vertragswidrigem Verhalten des Käufers, insbesondere bei Zahlungsverzug, ist die Schlem-mer GmbH unter den gesetzlichen Voraussetzungen berechtigt, vom Vertrag zurückzutreten unddie Vorbehaltsware herauszuverlangen.

7.8 Sollte der Eigentumsvorbehalt gemäß diesem Abschnitt nach dem (trotz der in Nr. 9.1 getroffe-nen Rechtswahl) zwingend anzuwendenden Recht des Landes, in welchem sich die Vorbe-haltsware befindet, nicht rechtswirksam sein, so gilt statt seiner die ihm am nächsten kom-mende rechtlich mögliche Sicherheit als vereinbart.

8. Zahlung8.1 Soweit nicht anderes vereinbart, sind die Rechnungen der Schlemmer GmbH ohne Abzug sofort

fällig.8.2 Der Käufer hat während des Verzuges die Geldschuld in Höhe von 8 % über dem Basiszinssatz

zu verzinsen. Die Schlemmer GmbH behält sich vor, einen höheren Verzugsschaden nachzu-weisen und geltend zu machen.

8.3 Wird dem Käufer Kredit oder Stundung aufgrund falscher Angaben eingeräumt, oder ver-schlechtert sich seine wirtschaftliche Lage nach Vertragsschluss, so ist die Schlemmer GmbHberechtigt, die Forderung sofort fällig zu stellen oder Sicherheitsleistung zu verlangen.

8.4 Der Käufer ist zur Aufrechnung nur berechtigt, wenn seine Gegenansprüche rechtskräftig fest-gestellt oder durch die Schlemmer GmbH anerkannt wurden. Der Käufer kann ein Zurückbehal-tungsrecht nur ausüben, wenn sein Gegenanspruch auf dem selben Rechtsverhältnis beruhtund von der Schlemmer GmbH nicht bestritten ist.

9. Schlussbestimmungen9.1 Soweit nichts anderes vereinbart, unterliegen die Vertragsbeziehungen zwischen der Schlem-

mer GmbH und dem Käufer ausschließlich dem Recht der Bundesrepublik Deutschland. DieEinheitlichen Gesetze über den internationalen Kauf beweglicher Sachen und über denAbschluss von internationalen Kaufverträgen über bewegliche Sachen, die Bestimmungen desUN-Kaufrechts sowie sonstige internationale Bestimmungen über den Kauf beweglicher Sachenfinden keine Anwendung.

9.2 Erfüllungsort ist Poing. Gerichtsstand für alle Streitigkeiten aus der Geschäftsbeziehung ist dasam Sitz der Schlemmer GmbH zuständige Gericht (nach funktionaler Zuständigkeit entwederAmtsgericht Ebersberg oder Landgericht München II).Ist die Schlemmer GmbH Kläger, kann sie auch den Sitz des Käufers als zuständigen Gerichts-stand wählen.

9.3 Daten des Käufers werden von der Schlemmer GmbH zum Zwecke der Vertragsdurchführungunter Beachtung des Bundesdatenschutzgesetzes in seiner jeweiligen Fassung gespeichert.

Sollten eine oder mehrere Bestimmungen dieser Allgemeinen Geschäftsbedingungen unwirksamsein oder werden, so bleibt die Gültigkeit der übrigen Bestimmungen davon unberührt. Anstelle derunwirksamen Bestimmung oder Bestimmungen sind durch Regelungen zu ersetzen, deren wirt-schaftlicher Erfolg dem mit der unwirksamen Klausel Beabsichtigten soweit wie möglich entspricht.

Verkaufs- und Lieferbedingungen der Schlemmer GmbH

10/2

002

239SchlemmerKABELSCHUTZSYSTEME

Page 239: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

1. Scope1.1 These sales and delivery terms and conditions are legally valid for all companies, legal persons

under public law and special public funds associating with Schlemmer GmbH.1.2 Quotations, deliveries and services of Schlemmer GmbH shall be made exclusively on the basis

of these sales and delivery terms and conditions. Any counter-statements made by the buyerwith reference to his own terms and conditions of business or purchase are hereby contradic-ted, unless an agreement is made to the contrary.

1.3 Verbal subsidiary statements are hereby contradicted.

2. Quotation and conclusion of contracts 2.1 The quotations submitted by Schlemmer GmbH are subject to change and non-binding. Tech-

nical and design deviations of performance data in leaflets, catalogues and documents as wellas change of models, construction and material are always subject to technical improvementsand progress in the scope of reasonability.Our samples are inspection samples of general nature without obligation and in no way bindingfor any kind of certain specifications.

2.2 The buyer declares to conclude a binding contract when placing an order. Schlemmer GmbH isentitled to accept the contract within two (2) weeks after receipt, if no longer term is mentio-ned in the order. The acceptance can be declared either in written form or by delivering the orde-red goods to the buyer. A contract is only concluded when Schlemmer GmbH accepts the con-tract quotation.

2.3 The contract is concluded providing that Schlemmer GmbH is being correctly delivered and ontime by its own suppliers. This is valid only in case that there is no fault attributable to Schlem-mer GmbH, especially in the case of having a congruent cover business with the supplier. Thebuyer shall be informed immediately about the non-availability of such obligation. A fulfilledcounter-performance shall be reimbursed immediately.

2.4 The quotations and all its enclosures (incl. plans, drawings, illustrations, technical specificati-ons, pricelists) are always to be considered as confidential. Any transfer to third parties mustbe expressly authorised in written form by Schlemmer GmbH. The obligation to maintainsecrecy does not pertain to, respectively is not applicable for information which is alreadyknown to the buyer or publicly available, without the buyer having causally contradicted thecontract.

3. Delivery time, transfer of risk and dispatch 3.1 The specification of delivery times is always non-binding unless the contrary has been agreed.

The beginning of a delivery time expressed by Schlemmer GmbH provides for the complete co-operation from the buyer.

3.2 The specification of delivery times is given providing that the Schlemmer GmbH itself is beingcorrectly delivered with supplies and on time from its own suppliers. Clause 2.3 of these salesand delivery terms and conditions apply accordingly.

3.3 Contracts designated with continuous delivery must be indicated by on call and with approxi-mate equal monthly delivery amounts at least four weeks in advance the actual month of deli-very by the buyer. Should there be no on-time call or amount indicated, then Schlemmer GmbHauthorises itself after a reasonable extension of time to opt for an actual amount and offer theactual delivery. Should the buyer not accept the goods, then this is considered as a break ofcontract through the buyer. Schlemmer GmbH is then entitled to exert its rights for derelictionof duty.

3.4 The risk of accidental damage or loss of goods shall be transferred to the buyer as soon as theshipment is completely handed over to the person responsible for transportation.

3.5 Should the shipment be delayed for reasons attributable to the buyer, then the transfer of riskis passed on to the buyer with notification to the buyer that it is ready for dispatch. Costs incur-red for storage as of notification are charged to the buyer.

3.6 Should the buyer become default outside of clause 3.3 in accepting the delivery of goods, thenSchlemmer GmbH is entitled to reimbursement of incurred damage including additional costs.In this case the risk of accidental damage or loss of subject matter of contract is transferred tothe buyer at that time that the buyer becomes default in accepting the delivery of goods.

3.7.1 At the request of the buyer, the shipment will be ensured at the expense of the latter againsttransit, breakage, fire and accidental damage.

3.7.2 Dispatch form and packaging are at sole judgement of Schlemmer GmbH if not expressly indi-cated otherwise.

3.7.3 Delivery is ex works if not otherwise agreed.3.7.4 Incoterms 2000 shall apply as for the rest. 3.8 Schlemmer GmbH authorises itself to partial deliveries at reasonable quantities. A delay of a

partial delivery in this respect does not entitle to non-acceptance of other partial deliveries. 3.9.1 Return of goods at buyers order can only be accepted if Schlemmer GmbH gives a written

approval and the goods are in original package and the goods are of current design.3.9.2 In this case a service fee of 20% of the invoiced value of the goods, yet although at least 125

EURO shall be charged.3.9.3 Returned goods without a written return approval from Schlemmer GmbH shall be refused and

returned to sender at the latter’s expense.

4. Prices4.1 All prices if not otherwise agreed are

- ex works,- plus packaging and dispatch costs, - plus legal value-added tax for sales within the Federal Republic of Germany.

4.2 Prices if not otherwise agreed are EURO per 100 pieces respectively 100 meters.4.3 A low-quantity surcharge of 15 Euro shall be imposed for invoices with a net goods value of

less than 50 Euro.4.4 If any extraordinary cost increases (e.g. raw material, energy, wages or shipping costs) should

be incurred to Schlemmer GmbH or its suppliers after having closed a contract thereupon lea-ding to higher buying prices or prime cost, then Schlemmer GmbH reserves the right after abinding term of four (4) weeks to resume negotiations with the buyer for a price adjustment. Ifno agreement is reached, then Schlemmer GmbH withdraws itself from the obligation to deli-ver the remaining deliveries.

4.4 Our brass-made products are calculated at a brass price quotation of 155,- Euro for MS 58.For every 13 Euro up or down a price increase or decrease of 5 % is determined. For example:EURO 142,– to EURO 167,99 0 Percent Brass Price IncreaseEURO 168,– to EURO 180,99 5 Percent BPI EURO 181,– to EURO 193,99 10 Percent BPI EURO 194,– to EURO 206,99 15 Percent BPI EURO 207,– to EURO 219,99 20 Percent BPI etc.

5. Warranty5.1 The time limit of the warranty is one year and commences with the date of delivery. This can

be null and void in single cases where any other agreement has been arranged respectively frau-dulent reproaches can be made against Schlemmer GmbH. The obligation to indicate defectsaccording to clause 5.6 remains unaffected.

5.2 Should operating and maintenance notices not be followed, products be altered, parts exchan-ged or functional parts be used, that do not correspond to the original specifications, then allwarranty rights are not applicable other than it can be proven that the defect is not attributableto improper handling or interference.

5.3 Product quality is principally regarded as characteristics, which the buyer can rely upon due tostatements made by Schlemmer GmbH or due to the manufacturer’s product descriptions,other than Schlemmer GmbH did not know nor have to know of these statements at the timethe contract was concluded or at that time equivalently corrected or could not influence thedecision to buy the product. Any other statements given by the manufacturer, especially inadvertisements are not regarded as a stipulated condition of the product.

5.4 Should the buyer receive an insufficient mounting instruction, then Schlemmer GmbH is onlyobliged to deliver a fault-free mounting instruction and this only if the mounting instructiondefault would lead to an insufficient mounting.

5.5 The buyer shall not receive any kind of legally stated warranties through Schlemmer GmbH.Manufacturer’s warrantees shall stay unaffected.

5.6 The buyer shall immediately on receipt of a shipment from Schlemmer GmbH, 14 days at thelatest inspect the products for defects and report apparent defects to Schlemmer GmbH. Notapparent defects are to be reported immediately, but 14 days at the latest after the discovery.Observance of deadline is an on time return notification. Should the notification be disregarded then the enforcement of any warranty claim is excluded.The buyer is responsible for full burden of proof for any claim especially for the defect itself, thetime of filing the deficiency claim and for an on-time notice of defect.

5.7 The warranty of merchantable quality will at discretion of Schlemmer GmbH be performed byrepair or replacement of the faulty product. If the repair or replacement is not satisfactory, thebuyer shall be principally entitled to demand a reduction of purchase price or rescission of thecontract. For any minor contradictions to the contract, especially minor deficiencies the buyerhas no withdrawal rights from the contract.

5.8 In order to carry out such warranty obligations Schlemmer GmbH may at its own discretionrequest the buyer to a) return the faulty product for repair to Schlemmer GmbH at the buyers own expenseor b) prepare the faulty product for a service technician commissioned by Schlemmer GmbH tocarry out the repair as agreed with the buyer.

5.9 Should the buyer choose to rescind from contract after a failed repair then the buyer shall notbe entitled to any further claim for damages. Should the buyer choose to claim for damage aftera failed attempt to repair, then the product shall remain with the buyer in so far as it be rea-sonable.The claim for damage is limited to the difference between the sales price and value of the faul-ty material. This although does not apply if the default was caused by deception of SchlemmerGmbH.

6. Limitation of liability, assignment6.1 Schlemmer GmbH is not liable for minor intended infringement of insignificant contractual

duties. Otherwise liabilities are limited to the case of minor infringement of duties relating totype of product with foreseeable, contractual type damages. The above limitation of liability alsoapplies to parties engaged in the performance of Schlemmer GmbH obligations.

6.2 The above mentioned liability limitations do not affect buyers claims for product liability. Furthermore the liability limitations do not pertain to body and health damages or loss of life,in so far as they are chargeable to Schlemmer GmbH.

7. Retention of title7.1 Schlemmer GmbH shall retain title over all goods until completely paid for and until all claims

for whatever legal reasons are settled.7.2 Reserved goods and thereof processed goods may be sold or otherwise used by the buyer only

on terms which are customary in the industry and in the ordinary course of business and pro-vided that the buyer is not in default and that no circumstances are evident which could resultin the sale prejudicing the claims of Schlemmer GmbH. The goods subject to retention of title may not be transferred as property by way of security orbe pledged by the buyer. (Goods subject to retention of title are referred to as „reservedgoods“).

7.3 If reserved goods are combined with objects not belonging to Schlemmer GmbH, this shall bedone on behalf of Schlemmer GmbH with the result that Schlemmer GmbH receives title to thenew object in accordance with the proportionate value (invoice value) of reserved goods in thefinal product. The combination and storage of reserved goods for Schlemmer GmbH shall notentitle the buyer to make any claims against Schlemmer GmbH.

7.4 The buyer is obliged to handle the reserved goods with care and insure sufficiently againstcustomary risks.

7.5 The buyer is entitled to sell the reserved goods in the ordinary course of business. The rightsacquired by the buyer through the use of reserved goods or through the handling by third par-ties shall be assigned entirely or partially to Schlemmer GmbH by the buyer when the contractwith Schlemmer GmbH is entered into. Schlemmer GmbH shall accept the assignment. It authorises the buyer to collect claims due. Schlemmer GmbH reserves the right to revoke theauthorisation and to collect claims itself as soon as the buyer becomes default in payment. Inthis case the buyer must disclose the assignment and submit any and all required necessarydocuments.

7.6 If the reserved goods are pledged or the rights of Schlemmer GmbH are otherwise jeopardisedthe buyer shall immediately inform Schlemmer GmbH and in alignment with Schlemmer GmbHdo everything necessary to avert the property. If appropriate, the buyer shall on request bySchlemmer GmbH assign claims to Schlemmer GmbH as required. The buyer must immedia-tely notify Schlemmer GmbH about any exchange of ownership of reserved goods as well asany corporate relocation.

7.7 In case of any contradiction of contract especially default of payment, Schlemmer GmbH is ent-itled to rescind the contract and demand return of reserved goods.

7.8 If, in the case of a foreign country of destination, retention of title is not effective or not fullyeffective to the stipulated extent of the selected agreed clause No: 9.1 the buyer shall co-operate in providing securities which effectively approximate as closely as possible to the reten-tion of title.

8. Payment8.1 All Schlemmer GmbH invoices shall be immediately payable without deductions, if not other-

wise agreed.

8.2 In the event of the buyer defaulting in payment on the due date, Schlemmer GmbH shall be ent-itled to charge interest from the said date onwards at the rate of 8% above the official discountrate. Schlemmer GmbH reserves the right to make further claims for damage or loss resultingfrom damage.

8.3 In the event the buyer has been granted a credit or the term of payment has been extended dueto false statements or Schlemmer GmbH learns of circumstances that cast serious doubt on thebuyers creditworthiness after a contract is entered into, then Schlemmer GmbH shall be entit-led to declare the outstanding debt due for payment or demand an assignment as security.

8.4 The buyer shall be entitled to offset only if the counterclaims have been established in law orhave been accepted by Schlemmer GmbH. The buyer shall be entitled to retain amounts only ifthe counterclaims are based upon the same legal relationship and are undisputed by Schlem-mer GmbH.

9. Final provisions 9.1 The contractual relationship between Schlemmer GmbH and the buyer, if not otherwise agreed

shall be exclusively governed by the law of the federal Republic of Germany. The uniform inter-national commercial code relating to the international sale of goods and formation of contractsas well as any other international provisions for sale of goods shall not apply.

9.2 Place of fulfilment is Poing. For bilateral commercial transactions the legal venue shall be thecompetent court located near to Schlemmer GmbH (depending upon functional responsibilityeither Lower District Court Ebersberg or Higher Court II Munich.)If Schlemmer GmbH is complainant, it shall be entitled to take action against the buyer in thecourts in its general place of jurisdiction.

9.3 The buyer’s data shall be stored with Schlemmer GmbH for the purpose of this contract obser-ving the prevailing form of the federal Data Protection Law.Should any term or condition of this agreement of any part of any term or condition thereof shallbe or become invalid, the other terms and conditions or parts thereof shall remain valid. Theinoperative term or condition or part thereof shall be replaced by a term or condition which theparties agree as close as possible in commercial content to the inoperative term or conditionthereof.

Sales and Delivery Terms and Conditions of Schlemmer GmbH

10/2

002

240 SchlemmerKABELSCHUTZSYSTEME

Page 240: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

Belgien/NiederlandeIngenieursbureauDipl. Ing. H.M. CassirerPostbus 968422509 Je Den HaagTelefon: +31/70/3 50 16 61Telefax: +31/70/3 50 22 79e-mail: [email protected]

BrasilienSchlemmer do BrasilR. Antonio Jose Borges, 422Chacara Sto. Antonio04711.030. Sao Paulo - SPBrazilTelefon: +55/11/51 81-52 11/04 67Telefax: +55/11/51 82-98 84e-mail: [email protected]

ChinaNingbo SchlemmerHr. J. HuXiszhou Economic and Development ZoneXiangshan Ningbo315722 Zhejiang ProvinceTelefon: +86/574/65 83 92 58Telefax: +86/574/65 83 92 59 o. 65 83 75 68

DänemarkH. Jörgensen & Co ApSPraestermarkswej 8P.O. Box 3484000 Roskilde-DenmarkTelefon: +45/46/75 63 22Telefax: +45/46/75 61 40e-mail: [email protected]

EnglandAutotechnik Systems Ltd9 Merse RoadNorth Moons MoatRedditchWorcestershire B98 9HLTelefon: +44/1527/59 80 50Telefax: +44/1527/59 80 55e-mail: [email protected]

FinnlandTSPSähköpalvelu OyLentokentänkatu 9 B, PL 4033901 TampereTelefon: +33/58/32 51 52 21Telefax: +33/58/32 51 52 22e-mail: [email protected]

FrankreichS.I.B.-A.D.R.50, rue du Capitaine MaillardB.P. 4057220 BoulayTelefon: +33/38/7 79 20 22Telefax: +33/38/7 57 32 45

IndienControlwell79, Shell Colony RoadChemburMumbai - 400071Telefon: +91/22/5 22 84 08Telefax: +91/22/5 22 16 49e-mail: [email protected]

IranRepräsentant DIMEXHandelsgesellschaft mbHArcostraße 580333 MünchenTelefon: 0 89/59 85 85-87Telefax: 0 89/59 61 00

ItalienSchlemmer Italia srlVia Campi della Rienza, 13 (C.p.196)39031 Brunico (BZ)Telefon: +39/474/57 17 55Telefax: +39/474/55 55 11e-mail: [email protected]

Logistik CenterLoc. Vanzelle37010 RivoliVeronese (VR)Telefon: +39/45/6 28 00 13Telefax: +39/45/6 28 00 14e-mail: [email protected]

Kroatien, Slowenien,Serbien, BosnienNISA PROMET d.o.o.Hatzeova 27 (Precko)10000 ZagrebTelefon: +385/1/3 88 74 71Telefax: +385/1/3 88 00 68e-mail: [email protected]

MalaysiaSchlemmer (M) Sdn. Bhd.No. 25, Jalan PJS 11/24Bandar Sunway Technology Park46150 Petaling Jaya, SelangorTelefon: +60/3/56 31 11 25Telefax: +60/3/56 31 09 19e-mail: [email protected]

MarokkoSchlemmer Maroc Protection de Faisceaux Electriques S.a.r.l.Zone Industrielle, route de Tétouan,Lot 114, Allée no.:390000 TangerTelefon: +212/39/36 32 89Telefax: +212/39/36 31 79e-mail: [email protected]

MexicoSchlemmer S.A.Julian BojalilCalle Ricardo Flores Magon No. 9872920 Puebla, PUE, MexicoTelefon: +52/222/2 24 89 45Telefax: +52/222/2 24 89 43 o. 2 24 89 44

NorwegenElis Elektro ASP. Box 38 Lindeberg GARD1007 OsloTelefon: +47/22/90 56 70Telefax: +47/22/90 56 71e-mail: [email protected]

ÖsterreichHEINISCH & CO. KG.Dornbacherstraße 481170 WienTelefon: +43/1/4 81 51 81 Telefax: +43/1/4 81 51 81 10mit Auslieferungslagere-mail: [email protected]

PolenMERCATORBiuro PrzedstawicielskieFirm Zagranicznychul. Wilcza 29 A/400-544 WarszawaTelefon: +48/22/625 66 60 o. 625 65 41Telefax: +48/22/621 61 08e-mail: [email protected]

SchwedenÖsterlinds El. Agentur AGBox 9618321 TäbyTelefon: +46/8/587 08 800Telefax: +46/8/587 08 801

Singapur, Brunei,Indonesien, ThailandSchlemmer S.E.A. PTE LTDBLOCK 3016 UBI ROAD 1 # 04-139Singapore 408 706Telefon: +65/67 47 28 77Telefax: +65/67 47 22 06e-mail: [email protected]

SpanienFlexiland S.A.Poligono Industrial Can ClapersAvda. Principal N° 31, Naves 3-508181 Sentmental – BarcelonaTelefon: +34/93 715 19 50Telefax: +34/93 715 25 72e-mail: [email protected]

TürkeiKlemsanElektrik ElektronikAsuman BenliSan. Ve Tic. A.S.Pinar C. 84, Pinarbasi35060 IzmirTelefon: +90/232/47 90 600Telefax: +90/232/47 90 602e-mail: [email protected]

Tschechien/SlowakeiVM TradingMilan VykourilBendlova 161300 BrnoTelefon: +420/5/45 22 23 22Telefax: +420/5/45 22 27 01Handy: +420/603-422 178

TunesienSchlemmer Tunisie sarl Siège socialZone portuaire de Radès2040 RadèsB.P. 141 – P.T.T. Radès2040 RadèsTelefon: +216/1 46 98 98Telefax: +216/1 46 93 99e-mail: [email protected]

UngarnElmatit Kft.Karoly PinterSzabolcs u. 61134 BudapestTelefon: +36/1/3 20 36 41Telefax: +36/1/3 29 00 96

USAAltech Corp.35 Royal RoadNJ 08822-6000 FlemingtonTelefon: +1/9 08-8 06-94 00Telefax: +1/9 08-8 06-94 90e-mail: [email protected]

Verkaufsorganisation Industrie International / Sales Organisation Industry International

Page 241: Katalog Industrie 2003 - FEK.BYfek.by/upload/iblock/d42/d42abf4ba321677f89c8e4b48ce54636.pdf · 8,5 8,4 11,7 15 1200089 1203908 50 10 9,9 13,0 20 1200100 1203910 50 12 12,2 15,7 30

MA

R/6

000-

011/

03-0

3/5

Verkaufsorganisation Industrie Deutschland Sales Organisation Industry Germany

Schlemmer GmbHGruber Straße 4885586 PoingGermanyPhone +49(0)81 21/8 04-0Fax +49(0)81 21/8 04-1 13info@schlemmer-kabelschutz.dewww.schlemmer-kabelschutz.dewww.schlemmer-group.com

Augsburg/UlmTechnische Fachberaterin:Jana ClaußKlingbauerweg 185123 Karlskron/ProbfeldTelefon: 0 84 50/92 55 00Mobil: 01 72/3 70 79 55Telefax: 0 84 50/92 55 01e-mail: [email protected]

BerlinTechnischer Fachberater:Dietmar HermannAm Hegewinkel 1a14169 BerlinTelefon: 0 30/72 01 60 19Mobil: 01 72/8 97 28 29Telefax: 0 30/72 01 60 21e-mail: [email protected]

Technischer Fachberater:Eckehard LöweBerggasse 2701683 NossenTelefon: 03 52 42/4 37 91Mobil: 01 72/8 53 04 42Telefax: 03 52 42/4 37 92e-mail: [email protected]

BielefeldTechnischer Fachberater:Gerhard HabandtIm Flaßsiek 7132130 EngerTelefon: 0 52 24/93 85 04Mobil: 01 72/8 53 04 43Telefax: 0 52 24/93 85 05e-mail: [email protected]

Frankfurt (Main)Mannheim, KasselRainer ErkIndustrie-VertretungenWerner-von-Siemens-Straße 6A63486 BruchköbelTelefon: 0 61 81/70 96 53Telefax: 0 61 81/78 00 20e-mail: [email protected]

HamburgJens BrehmerHandelsvertretungenLuruper Hauptstraße 21622547 Hamburg Telefon: 0 40/8 32 16 07Telefax: 0 40/8 31 61 30

HannoverKarsten ProkotIndustrie-VertretungOsterwalder Str. 830827 GarbsenTelefon: 0 51 31/9 26 98Telefax: 0 51 31/76 28e-mail: [email protected]

Köln/DuisburgHarald RöhrigIndustrie-VertretungenAkazienweg 11a51503 RösrathTelefon: 0 22 05/90 94 11Telefax: 0 22 05/90 94 12Technischer Fachberater:Mirko LiesenfeldTelefon: 01 72/8 56 81 72e-mail: [email protected]

MünchenWinfried Kerner GmbHIngenieurbüroKiebitzweg 1185370 Neufahrn/FreisingTelefon: 0 81 65/52 45Telefax: 0 81 65/6 21 28e-mail: [email protected]

Münster/BremenEltplan Vertriebs GmbHBohmter Straße 1849152 Bad Essen Telefon: 0 54 72/94 15-0Telefax: 0 54 72/94 15-26e-mail: [email protected]

NürnbergSiegfried KrauseIndustrie-VertretungenKarlsbader Straße 2190480 Nürnberg Telefon: 09 11/40 60 90Telefax: 09 11/40 42 74e-mail: [email protected]

SaarbrückenHerbert NeundörferWerksvertretungenSaargemünder Straße 68a66130 GüdingenTelefon: 06 81/87 54 54Telefax: 06 81/87 54 53e-mail: [email protected]

Stuttgart/HeilbronnFreiburgRoland Gohl GmbHIndustrie-VertretungenMotorstraße 570499 Stuttgart Telefon: 07 11/83 30 45/46Telefax: 07 11/8 38 02 73e-mail: [email protected] Fachberater:Rolf KoppTelefon: 01 72/8 64 01 21e-mail: [email protected]

23

2524

2222

21Hamburg

Bremen28

27

29

19

23Hannover

313238

39

18

17

16

Berlin

14 15

03

0406

01

09

0807

99

98

96 95

929190

Nürnberg

93

86AugsburgUlm

München

8985 84

8382

94

8788

80/8178

72

73

7170

76

77

79Freiburg

Stuttgard

74Heilbron

6968

Mannheim67

5564

66Saarbrücken

54

5665

60 63

61Frankfurt a. M.

53

52 50Köln 51

57

35 36

4140 42 58

4445

4647Duisburg 59

33

34

Kassel

Bielefeld

Münster

48

49

26

37

02

97