LSI 1509
Transcript of LSI 1509
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 1/68
READY
FORMOREBig audio for theZac Brown Band
PLUS:
AUDIO VISUALIZATION
VOCAL MIXING BASICSREAL WORLD GEAR: SUBS
uly 2009 | www.prosoundweb.com | $10uly 2009 | www.prosoundweb.com | $10
THE JOURNAL FOR LIVE EVENT TECHNOLOGY PROFESSIONALS
I N T E R N A T I O N A LSeptember 2015 | www.prosoundweb.com | $10
NSTALLATION | CONCERT | THEATER | CORPOR ATE AV | WORSHIP | CLUB | RECORDING
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 2/68
L-Acoustics WST® technology is now packaged in two enclosures perfectly arrayable into a constant curvature line source with
no destructive interference typical of trapezoidal cabinets. Treat yourself to just one pair, first. And as your appetite for coverage
grows, you can come back for seconds, thirds, or more, adding slice by slice, until you’re sound-full. Serve your audience the
legendary L-Acoustics sonic signature and rider friendliness. The icing: the price is tailored to medium-sized productions. They say
you can’t have your sound budget and your acoustic system, too. We say you can. Give it a taste at www.l-acoustics.com
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 3/68
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 4/68
Unite Your Audience
As a FOH engineer you want
every row, front to back, in tune
with your mix.
MLA delivers total confidence that
every lyric, cymbal, bass andhigh note is in glorious definition
to every member of
your audience.
That’s the Martin AudioExperience.
Unite your audience at
www.martin-audio.com
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 5/68
The standards stay, but innovation never ends.
Going strong, V3 software for the popular
CL and QL Series features a variety of
upgrades making our family of digital mixing
consoles more efficient than ever.
This next step up includes an 8-band Parametric
EQ Option with Notch Filters, Real Time Analyzer
Function, 4 User Defined Key Banks, Surround Sound
Panning and Monitoring and so much more.
Perhaps most notable is the addition of the
Dan Dugan Automatic Mic Mixer for the CL Series.
Already included in the QL Series, gain distribution
for up to 16 speech microphone channels isautomatically optimized in real time, achieving
smooth, natural level control.
What could be smarter than that?
For a complete list of features and to download the
software free-of-charge, visit www.yamahaca.com.
CL1
CL3
CL5
QL1
QL5
Yamaha Corporation of America • P. O. Box 6600, Buena Park, CA 90620-6600 • ©2015 Yamaha Corporation of America
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 6/68
Live Sound International (ISSN 1079-0888) (USPS 011-619), Vol. 24 No.9, is published monthly by EH Publishing, 111 Speen Street, Suite 200, Framingham, MA 01701 USA. US/Canada/Mexico subscriptions are $60 per year. For all othercountries subscriptions are $140 per year, airmail. All subscriptions are payable by Visa, Master Card, American Express, or Discover Card only. Send all subscription inquiries to: Live Sound International, 111 Speen Street, Suite 200, Framingham, MA01701 USA. Canada Subscriptions: Canada Post Agreement Number 40612608. Send changes of address information and blocks of undeliverable copies to Pitney Bowes International, PO Box 25542, London, ON N6C 6B2. POSTMASTER: send
address changes to Live Sound International, PO Box 989, Framingham, MA 01701. Periodical Postage paid at Framingham, MA and additional mailing offices. Reproduction of this magazine in whole or part without written permission of the publisheris prohibited. Live Sound International® is a registered trademark of EH Publishing Inc. All rights reserved. 2015 EH Publishing. Check us out on the web at http://www.prosoundweb.com.
IN THIS ISSUE
FEATURES
20 | Ready For More
The audio scene on the Zac Brown Band’s Jekyll+ Hyde Tour. by Greg DeTogne
34 | Test DriveBreaking in a new rig on the Mercedes-Benz
Evolution event series. by Sam McLean
38 | Creative Strategies Techniques for when the console has too few –
or extra – channels. by Craig Leerman
46 | Playing In Peoria A significant system upgrade for a major Midwest
venue. by Live Sound Staff20
SEPTEMBER 2015
8 | Loading Dock EQUIPMENT New loudspeakers, con-
soles, software, and more.
10 | Backstage Class Thinking about the mix in a graphical way.
by Andy Coules
16 | SpotlightCarry-on mixing – going on tour with QSC
TouchMix. by Mark Frink
26 | ShowcaseKeeping up to speed on microphone ac-
cessories and cable. by Craig Leerman
30 | Front LinesSeven keys to making vocals sound like
you want them to sound. by Chris Huff
42 | Leading EdgeEliminating the cable in feeding delays with
the AiRocks Pro system. by Keith Clark
48 | World StageSonic excellence for a range of live produc-
tions. by Live Sound Staff
52 | Road TestChecking out the Shure QLX-D digital wire-
less microphone system. by Craig Leerman
54 | Real World GearEQUIPMENT Subwoofer principles and a
look at recent models. by Gary Parks
6 | From the Editor’s Desk
62 | NewsBytes
64 | Back Page
DEPARTMENTS
30 48
34
CREDIT: SOUTHERN REEL
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 7/68
SlimArrayTechnology
S.A.T.
Powerful soundcompact design
the new Concert SeriesKH2 KH3 KH5
Self powered
Weather resistant
Onboard touch screen
Distributed in U.S. and Canada by
718-720-5200
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 8/68
From the Editor’s Desk… I N T E R N A T I O N A L
VOLUME 24 | NUMBER 9
. c o m
Publisher | Kevin McPherson | [email protected]
Editor-In-Chief | Keith Clark | [email protected]
Senior Editor | M. Erik Matlock | [email protected]
Senior Contributing Editor | Craig Leerman | [email protected]
Church Sound Editor | Mike Sessler | [email protected]
Technical Consultant | Pat Brown | [email protected]
Art Director | Katie Stockham | [email protected]
ProSoundWeb.com
Editor-In-Chief | Keith Clark | [email protected]
Senior Editor | M. Erik Matlock | [email protected]
Product Specialist | Craig Leerman | [email protected]
Webmaster | Guy Caiola | [email protected]
Andy Coules | Chris Huff | Sam McLean
Mark Frink | Greg DeTogne | Gary Parks
Live Sound International
111 Speen Street, Suite 200
Framingham, MA 01701
Phone: 800.375.8015
www.livesoundint.com
Jeffrey Turner | Associate Publisher
415.455.8301 Fax: 801.640.1731
Mark Shemet | Associate Publisher Online, ProSoundWeb.com
603.532.4608 | Fax: 603.532.5855
Manuela Rosengard | Ad Production Director
508.663.1500 x226 | [email protected]
Jason Litchfield | Ad Production Manager
508.663.1500 x252 | [email protected]
Rachel Felson | Jr. Production Designer
Circulation and Customer Service inquiries should be made to:
Live Sound Customer Service
EH Publishing
Phone: 800-375-8015, ext 294
(Outside the U.S.: 508.663.1500 x294)
Fax: 508.663.1599
111 Speen Street, Suite 200
Framingham, MA 01701
EDITORIAL AND READER SERVICE RELATED EMAIL ADDRESSES
Circulation & Subscriptions | [email protected]
Loading Dock Submissions | [email protected]
World Wide Web Inquiries | [email protected]
Advertising Rate Information | [email protected]
REPRINTS: Wrights Reprints
877.652.5295 | [email protected]
We’ve been very fortunate to add Andy Coules as a regular contribu-
tor to these pages. As a long-time mix engineer, as well as an audio
educator, he delivers consistently insightful and
highly topical discussions. This issue is no exception, with Andy focus-
ing on the advantages of visualizing audio as a
way to better understand what’s happening, par-
ticularly with mixing. As he notes, a graphical
depiction can often be quite instructive in con-
veying an idea, and after reading his article, I
believe you’ll agree.
Craig Leerman consistently does yeo-
man’s work in looking at vital yet overlooked
aspects of audio work that, if not addressed, can quickly take down
a show. This time out, he puts his attention on the things necessaryto get optimum performance – or any performance at all – from
microphones.
What stands out is Craig’s experience in dealing with the ups and
downs of mic accessories, combined with his usual attention to detail
that informs us as to why he’s been successful in working on the front
lines of sound reinforcement for more than 30 years. Clips and cables
aren’t sexy, but if one or the other isn’t working properly, good luck –
regardless if it’s a bargain-bin mic or the latest studio-grade condenser.
Elsewhere, Craig also shares some creative ideas for getting the
most out of consoles, large and small. Mark Frink checks in with an
interesting report of deploying a very compact digital mixing platform with great success, while Chris Huff offers useful approaches to getting
the most out of vocals in the mix.
And as always, there’s much more. Enjoy the issue...
Keith Clark
Editor In Chief, Live Sound International/ProSoundWeb
ON THE COVER: The sound team for the
Zac Brown Band with an L-Acousticsarray at Nationals Park in Washington,
D.C. on the current Jekyll + Hyde Tour.
(Photo by Kyle Rippey/Southern Reel)
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 9/68
THE NEW
TOURING ICON
+Lab.gruppen introduces Rational Power Management (RPM),
on top of the outstanding performance users have come to
expect from a PLM, a proprietary Lab.gruppen technology that
gives system designers and techs unprecedented freedom
to allocate the output power available on each channel for
optimum performance with specific load conditions. This
enables the user to minimize equipment costs, reduce rack
space and improve long-term energy efficiency – all without
compromising sonic performance.
PLM+ Series - Amp channels power adjusted to match the loudspeaker requirements
3000 W
MIDSUB LOW HIGH
Find out more at thenewtouringicon.com
RPM CLASS TD CAFÉ C H A N N E
L
MATRIX C H PFC
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 10/68
LOADINGDOCK
8 Live Sound International September 2015 www.ProSoundWeb.com
@ Roland Professional A/V M-5000C A compact mixing console incorporating the O.H.R.C.A.
(Open High Resolution Configurable Architecture) platform
that offers a mix engine with 128 freely definable audio
paths, architecture supporting Dante, MADI, Waves
SoundGrid, and REAC protocols, and delivery over videousing SDI, DVI and SFP cabling. Built-in REAC ports sup-
port integration for multi-track recording/playback, Roland
M-48 personal mixers, and several I/O box choices, all
at 24-bit/96 kHz. The console itself has 16 inputs and 8
outputs, as well as a 72-bit summing bus. Control includes
a 12-inch color touch screen, 20 channel faders in three
groups, anchor points, DCA spills, multi-function knobs
and buttons, and a user assignable section. Remote
control software extends the user interface. The M-5000C
measures under 30 inches in width and weighs 70 pounds.
In addition, new software version 1.101 is available for theflagship M-5000 console and can be downloaded from the
company website. proav.roland.com
Powersoft ArmoníaPro Audio Suite 2.6.0 ¤ The latest update to the digital signal monitoring and pro-
cessing software that is compatible with the full range of
Powersoft amplifiers. It includes a firmware updater and
SnapRecall functionality for both the X Series and the
new Ottocanali DSP+D line of amplifiers. Also included
are new loudspeaker presets in the library, improve-
ments in system list representation, and upgraded DSP
metering. The new version is available for download at
the Powersoft Armonía Support Forum on the company
website. www.
powersoft-
audio.com
Yamaha DXS18 ¤The newest addition to the DXS Series of powered subwoofers incor-
porates an 18-inch woofer (with 4-inch voice coil) in a band-pass type
plywood enclosure equipped with M20 and 35 mm pole sockets andprotected by a durable LINE-X finish. The onboard class D amplifier
provides more than 1,000 watts of audio power, while proprietary DSP
technology with original D-XSUB processing supplies additional con-
trol of the LF range via two selectable
modes (BOOST and XTENDED LF).
A selectable crossover with three dif-
ferent options (80/100/120 Hz) and a
cardioid mode setting is also provided.
Maximum SPL is stated as 136 dB,
with extended LF response down to
32 Hz. An optional wheel kit is alsoavailable. www.yamahaproaudio.com
QSC TouchMixControl Android2
An free app for Android-
based tablets and smart-
phones, and like its iOS
predecessor, it offers com-
prehensive control of Touch-
Mix digital mixers, effectivelyreplicating the on-mixer touch screen interface. The full complement of
features is available to tablet device users on both platforms. On Android
smartphones or Apple iPhone and iPod Touch devices, the TouchMix
Control App operates as a compact, personal stage monitor Aux mix-
ing solution. Up to 12 external devices comprising any combination of
Android or iOS smartphones or tablets may be connected to a Touch-
Mix mixer. The Android app can be downloaded from Google Play while
the iOS app is available at the iTunes Store. www.qsc.com
K-array KR802 ¤ A packaged system that includes a pair of KMT218 (2 x 18-inch)
subwoofers joined by two KY102 mid-high loudspeakers loaded
with 4-inch neodymium elements. All have two channels of class D
amplification (2,500 watts per channel), housed in the subwoofers.
The rear panel provides input for a balanced
line signal, a balanced microphone signal with
phantom power, and digital signals in AES/EBU
protocol, also on an XLR for ease of cabling.
DSP functions, including EQ, can be controlled
with remote management software via USB
or RS485, again on a standard XLR. The
DSP also provides the ability to establish
presets. www.k-array.com
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 11/68
www.ProSoundWeb.com September 2015 Live Sound International 9
Products Fresh Off the Truck
RCF VMAX Series ¤ A family of loudspeakers with focused horn directivity that are designed
for both portable and permanent applications. Woofer choices in full-range
models include 6-inch, 10-inch, 15-inch, and dual 15-inch, with subsavailable in dual 18-inch and dual 21-inch configurations. Dispersion is 90
x 60 degrees for the 6-inch and 10-inch models, and 90 x 40 degrees for
both 15-inch designs. All incorporate proprietary Precision Hyper-Vented
woofers and Constant Matching Design of transduc-
ers that help maximize efficiency and output. Cabinets
are made of reinforced construction birch
protected with weather-resistant polyurea
paint, while grilles are epoxy-coated steel. The
2-way models have a stage monitoring angle
and also include a pole mount cup and M10
flypoints for permanentinstallation.
www.rcf-usa.com
@ Yamaha v3.1 For CL/QL,StageMix v5.1Firmware update version 3.1 adds new features to CL/
QL Series digital consoles, including control of the
RSio64-D that serves as a bridge between a Dante net-
work and the MY-card format. It's also now possibleto update both the console firmware and the Dante
firmware from a USB drive in one operation. StageMix
v5.1 for CL, M7CL and LS9 consoles offers 121-band
real-time analyzer (RTA) support. New features in v5.1
for CL/QL consoles include an improved USB recorder.
The free updates can be downloaded from the com-
pany website. www.yamahaca.com
Lab.gruppen LUCIA Application
Browser2 A new ver-
sion of the
configura-
tion soft-
ware for all six LUCIA power
amplifiers – including the two new 70-volt models
– that can access the full set of matrixing and DSP
features. It also now includes custom EQ on inputs,
custom EQ or preset recall for each discrete output,
reconfigurable GPI ports, and more. The free software
can be downloaded from the company website.
www.labgruppen.com
Shure ULX-D 900 MHz2Shure ULX-D digital wireless systems are now available in the 900 MHz ISM frequency
band; specifically, components and accessories are optimized for use within regional
variations of the 902-928 MHz spectrum, generally known as the Industrial, Scientific, andMedical (ISM) band. In addition, the latest version of its Wireless Workbench 6 software
(version WWB 6.11.2) will offer a new Site Survey tool that assesses the availability of 900
MHz ISM spectrum in a particular venue. The Site Survey Tool uses the receiver to capture a long-term scan and processes the data to
provide a usability report, indicating an approximate number of usable channels in the ISM band. In the U.S., ULX-D 900 MHz systems
can support up to 12 compatible channels per frequency band, or up to 73 channels in high-density mode. www.shure.com
Aviom Mix320-A, Mix320-Y & Mix320-D ¤Three packages built around the company’s A320 personal mixer and
designed to accommodate six users. The Mix320-A includes an analog AN-
16/i v.2 input module with 16 TRS balanced inputs as the front end of the
system. The AN-16/i v.2 connects to a D400 A-Net distributor that supplies
digital data and DC power to its eight A-Net ports. Six A320s, six MT-1a
mic stand mounts, and seven 25-foot Cat-5 cable round out the package.
The Mix320-Y is for users of Yamaha digital consoles, and it includes a Y1
A-Net card to get digital audio from the console into the system. The Y1
card’s A-Net output connects to a D400 A-Net distributor, and from there
Cat-5 cables connect the six A320s. Mounts and Cat-5 cables are included
as well. The Mix320-D is designed for use with Dante-enabled consoles
and networks, and it includes a D400-Dante A-Net distributor that allows
up to 32 channels to be patched from the network to the system inputs. It
too includes six A320s, six
mounts, and all needed
Cat-5e cables. The pack-
ages are sold in the U.S.
only. www.aviom.com
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 12/68
10 Live Sound International September 2015 www.ProSoundWeb.com
��
AUDIO VISUALIZATION
drum that has been miked in a standard
way, with a single microphone poking
through the hole in the front skin. Here
we can see there is slightly more energy
in the bottom and top of the sound (i.e.,
the thud and the click) than there is in
the middle – quite common when closemiking a kick drum. The right side of the
image represents the same signal after a
little EQ has been applied, in this instance
the bottom end has been enhanced while
the lower and upper mid range frequen-
cies have been reduced slightly to give that
classic kick drum sound.
EQ isn’t the only way we affect the
frequency content of sounds so let’s take
a look at some other methods (Figure 2).
On the left is a representation of a
snare drum that has been miked up in
standard manner – a single mic above
the top skin. In the middle is the same
snare with a high-pass filter applied, as
indicated by the fade (which denotes the
gradual reduction in the lower frequency
content). On the right is the same snare
after compression has been applied. In this
instance the compressor is limiting not
just the dynamic range of the snare (whichis difficult to depict in a static image) but
IT IS SAID THAT “a picture is worth a
thousand words” and nowhere is this more
applicable than when trying to teach com-
plex concepts. A graphical depiction can
often convey an idea better, and quicker,
than a whole bunch of words. This is
because our brains are mainly image pro-cessors, not word processors; the part of
our brain that processes words is actually
very small in comparison to the part that
processes visual information. Therefore
visual cues help us to better store and
retrieve complex information.
Bearing this in mind I’ve been
exploring various ways of representing
key audio concepts and terminology
visually. This invariably involves a cer-
tain degree of simplification but I thinkthe results are a useful weapon in the
battle against incomprehension.
Let’s start by looking at a simple
way to represent the frequency content
of a single sound, such as a kick drum,
shown here against a vertical axis denot-
ing frequency (Figure 1).
On the left is a representation of a kick
also it’s frequency content, resulting in a
tighter and punchier sound at the possible
expense of some of the finer detail.
Now that we’ve established a simple way to visually represent the different
sounds, and the ways in which we can
affect them, let’s take a look at a full
drum kit. The kit as a whole has the
widest frequency range of just about any
instrument (with the possible exception
of the pipe organ), from the low thud of
the kick drum to the fizzy sparkle of the
cymbals. It comprises multiple elements
that all need to be miked up in a way that
enables us to treat each individual soundin relative isolation such that when they
are combined, they complement each and
work together as a whole. If we take a
standard four-piece drum kit, miked up
in a standard way (i.e., a single mic on
each drum with a pair of overheard mics),
and just bring up all the faders, it might
“look” something like Figure 3.
I’ve now added panning information tothe horizontal axis to denote the position-
ing of the sounds within the stereo field
(at the moment everything is panned cen-
trally). The one thing that this depiction
makes obvious is the clutter that occurs
where the sounds overlap each other, par-
ticularly in the mid range where the kick,
snare and toms all produce sound energy.
This is a common cause of “muddiness”
in the drum mix – something which can
quite easily be addressed with a little EQand panning (Figure 4).
Thinking about the mix in a graphical way.
by Andy Coules
BACKSTAGECLASS
Fig. 1
Fig. 2
Fig. 3
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 13/68
For more information visit
4wrd.it/DXSLS
©2015 Yamaha Corporation of America. All rights reserved.
Serious• Damage Resistant
LINE-X© Coating
• Dual Pole Socket
• Optional Casters
Serious.
Bass.
Performance.
DXS18.
Bass• Custom Designed Woofer
• D-XSUB processing for
Ultimate Bass Control
• Cardioid Mode for SPL control
Performance• Extremely High SPL with
1020W Class-D Amplifier
• Clear and Accurate Bass from
Band-Pass Type Enclosure
The loudest, hardest hitting
Yamaha powered subwoofer. Ever.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 14/68
12 Live Sound International September 2015 www.ProSoundWeb.com
:: Backstage Class ::
Here we can see that a bit of EQ has
been used to bring the bottom end of the
kick drum out, the kick has also been
compressed and a low pass filter has beenapplied. The snare has also been com-
pressed and a high pass filter has been
used to tame the lower mid energy. The
toms have been EQ’d and panned to cre-
ate some space for the snare and mimic
their physical placement in the kit. The
cymbals (or overheads) have been high
passed and panned wide to give the top
of the kit a nice sense of width.
Overall you can quite clearly see that
the processing, while quite subtle, hascreated space for each individual element
of the kit so they can be clearly heard but
also so they work together and comple-
ment each other. This avoids the mud-
diness that can so easily bog down the
drum sound and gives the kit the clarity
and definition that will help it to sound
good, even in the busiest of mixes.
Speaking of which, let’s take a look
at other common mix elements in the
form of a simple three guitar set-up, i.e.,
bass, rhythm and lead guitars (Figure 5).
This depiction shows the potential
for a messy sound in the lower mid
range where all three instruments pro-
duce energy. We can also clearly see themasking that commonly occurs when
the fundamental frequencies of the gui-
tar overlap and obscure the harmonics
of the bass. Guitars also tend to have a
pronounced low end as a result of the
use of directional microphones in close
proximity to speaker cabinets which
exacerbates the proximity effect.
Thankfully this can all easily be fixed
with high pass filters and a little pan-
ning (Figure 6).
First, the bass has been compressed,
which helps tighten it up and enables it
to rumble away at the bottom of the mix
without jumping out or dipping down.
The guitars have been high passed and
panned, which not only creates more
room for the bass but also helps them to
come across much more clearly. This may
result in the guitars sounding slightlythin when listened to in isolation, but
when combined with the bass, both
instruments will come across much better
while complimenting each other nicely.
Now that we have the tools to depict
key elements and processing lets take a
look at the mix as a whole.
Any musical performance that fea-
tures more than one melodic or rhythmic
element, be it live or recorded, requires
these elements to be mixed. Traditionallymusic was performed live and the mix
was achieved by intelligently positioning
the individual mix elements and aug-
menting where necessary. (You want the
violins to be louder? Get more violins!)
In the early days of recording, wherethe performance was captured com-
pletely live with one or two micro-
phones, a mix could be achieved by
moving the musicians relative to the
microphone(s), often during the perfor-
mance to create dynamic variation. In
live performance we’ve evolved methods
whereby each key element is miked or
taken direct individually, so that we can
treat them individually before combin-
ing them together in the mix.So what happens if we combine our
drum kit with the guitars and throw a
vocal on top? (Figure 7)
It’s starting to look a little messy now
but a mix is a complex interaction of
multiple elements, so that’s quite normal.
The vocals have been compressed to nar-
row their dynamic range and help them
sit on top of the mix, but there’s still arisk of them being swamped by the other
instruments that have energy in the same
frequency range (such as guitars). Being
as the vast majority of music we mix at
gigs is song based, ensuring the vocals
can be heard is a key challenge.
So what can we do to make them
stand out a bit more? (Figure 8)
The answer, of course, is reverb,
depicted here using an outer glow.
They key is to use a reverb that ’s smallenough to ensure the vocals don’t sound
Fig. 4
Fig. 5
Fig. 6
Fig. 7
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 15/68
Design for Live
A division of Jam Industries Ltd.
For more information email or call:
[email protected] | 800.431.2609 www.allen-heath.com
Our design goal for
dLive was to create the
ultimate mixing system, with
plenty of processing and flexibility to
handle the most demanding live scenarios,while at the same time giving the engineer
intuitive tools to comfortably keep all that power at their
fingertips, freeing them to focus on the live mixing experience.
Let’s arrange to get your fingertips on a dLive mixing system
and see what “design for live” is all about.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 16/68
14 Live Sound International September 2015 www.ProSoundWeb.com
:: Backstage Class ::
too distant while exploiting the spectral
smearing and stereo widening that can
help to make the vocal sound bigger. A
plate with a reverb time between 1.0 and1.6 seconds and a pre delay below 10 ms
usually does the job. I sometimes find
that rolling off the top end (or adjust-
ing the high ratio) of the reverb helps
to make it sound more subtle – less like
a digital reverb and more like a natural
acoustic space around the vocal.
But that’s not the only way to make a
vocal stand out in a busy mix (Figure 9).
Another trick I like to use is to apply
a slap-back delay to the vocal, here
depicted by the black drop shadow. Aslap-back delay can be anything between
50 and 300 ms, but I find a setting of
between 100 and 180 ms works particu-
larly well on vocals in mid-tempo songs.
The feedback gain should be set so
there is only one audible repeat – typi-
cally achieved by setting it to 10 percent.
This creates a single echo very close to
the vocal which has the effect of dou-
bling it and helping it stand out against
the background noise. Again rolling offthe top end of the effect can help make
it less obvious and more subtle.
As mix engineers we’re always striving
to build better mixes, so hopefully these
pictures have been worth a few thousand
words and have provided a unique insight
into the process. We might think we mix
with our ears, but our brains are doing all
of the hard work, so anything that can
help us visualize such abstract concepts
will enable us to better understand thenature of the mix and produce consis-
tently high-quality results. n
ANDY COULES (andycoules.co.uk)
is a sound engineer and audio educator
who has toured the world with a diverse
array of acts in a wide range of genres.
Fig. 8 Fig. 9
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 17/68
w w w . d
b a u d i o . c o m
The D20 amplifier is the forward thinking choice for realizingmid size solutions. All controlled via the intuitive user interfacesand remote network. Incorporating four truly independent channels,DSP capabilities for comprehensive loudspeaker management,switchable filter functions, two 16-band equalizers and upto 10 seconds of delay. Future ready. Available now.
Reect on the future: today‘s D20.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 18/68
16 Live Sound International September 2015 www.ProSoundWeb.com
The QSC Touch-
Mix-16 on tour with
the author in Prague.
YES, I KNOW. When I first saw it
at NAMM two years ago, I thought it
was a toy, but while I was at Summer
NAMM’s new TEC Tracks, across the
aisle QSC was presenting “the world’s
most powerful and portable easy-to-usecompact digital mixer” with hourly live
performances.
TouchMix is well into its second year
and second software revision, so I knew
it was stable. Greg Mackie and Peter
Watts consulted with QSC to design
this unique little mixer, so I knew it was
well thought-out. What surprised me
was TouchMix’s sound quality.
I’d already begun my summer tour
with New Orleans’ most legendary doc-tor using a different monitor desk and
a different set of wedges every day, with
wildly varying travel – literally planes,
trains and automobiles – so TouchMix
seemed like a solution that could pro-
vide day-to-day consistency, in a pack-
age small enough to be hand carried.
There are two models: TouchMix-16
is bigger, with twice the inputs of the
TouchMix-8. The TM16 also has six
mono auxiliary sends on XLRs insteadof the TM8’s four, and two stereo aux
sends for hard-wired in-ear monitors
on TRS instead of one. The TM16 has
both a stereo cue and a stereo monitor
on TRS, as well as an independent XLR
talkback input, while the TM8 simply
has a cue output.
FULL PACKAGE
TouchMix puts pro desk features in
a laptop form factor: four-band fullyparametric EQ, variable high- and
95 dB, dynamic range of 105 dB and
latency of 1.6 milliseconds, compar-
ing favorably not only to budget digitalconsoles, but to many midrange profes-
sional touring products as well.
Each input XLR has its own analog
gain “trim” pre-amp control – two rows
of eight trim knobs below two rows of
eight XLRs. There’s up to 45 dB of gain
in the full clockwise position. I disliked
them at first, as they can be bumped and
are obviously non-recallable. However,
unlike most other consoles, TouchMix
has no faders or encoders except for itssingle Master Encoder, making dedi-
low-pass filters, compressors and gates
on every channel, plus class-A mic
preamps, pro-grade converters, outputEQ, limiting and delay, as well as eight
DCA and eight mute groups. In addi-
tion to all those aux sends, there are
four dedicated FX sends with multi-
parameter digital effects optimized for
live sound, emulating popular L-word
(“Lush”) and Y-word (“Dense”) plate,
room and hall presets, plus delay and
micro-pitch shift.
Both models employ 32-bit floating
point processing, with 44.1 or 48 kHzsampling. Specs include a S/N ratio of
Going on tour with QSC
TouchMix. by Mark Frink
CARRY-ON
MIXING
SPOTLIGHT
��
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 19/68
www.ProSoundWeb.com September 2015 Live Sound International 17
cated gain controls necessary. The seven
Shure BETA 57 and 58 vocal mics sit
nicely at “12 o’clock” while SM58s
might be at “2 o’clock.” The tour’s file-based front of house
engineer Andy Loy uses a 32-chan-
nel input list that fits a wide variety of
digital consoles, so it seemed like the
TouchMix-16 might not be big enough.
However, only 16 channels are needed
in the wedges.
Obviously all seven vocal mics are
needed. In addition to the trombone’s
wireless BETA 98 and the effects ped-
als fed from its UHF-R receiver, we mictwo guitar amps, use the XLR output
from Roland Guerin’s Aguilar DB 751
bass head, a Nord keyboard’s JDI, and
a Barcus-Berry CS-4000 piano pickup
that’s used with a Countryman Type 10
DI. That makes 14.
Herlin Riley’s Mapex drum kit uses
a total of 13 mics, an input list that
would satisfy most festivals. However,
the majority of bands I’ve worked with
need no more than kick and hi-hat in
their floor monitors. While some musi-
cians ask for snare drum in their wedge,
most get more than enough snare from
the hi-hat mic, which is always needed
(Figure 1).
The Shure KSM 13 7, lik e th e
KM184, is particularly smooth and
accurate, and when placed a half-footabove the hi-hat cymbals, is shadowed
from the snare drum enough to balance
against it, but also gets enough toms to
sound natural when combined with a
dynamic kick drum mic, for a total oftwo more monitor inputs.
By varying the hi-hat mic’s height,
high-pass filter and EQ, a variety of
drum sounds can be supplied, from
lots of hi-hat to an even blend of hat,
snare and toms. Without the pounding
of snare drum mics in monitor mixes,
everyone can monitor at lower levels,
helping conserve hearing, though it’s
not for everyone. Check it out.
ON THE ROAD
We began our run on smaller stages,
starting with a Philadelphia parking
lot gig. Moving into New England we
played the Bull Run in Shirley MA, the
Flying Monkey in Plymouth NH, The
Space in Westbury NY, the Westhamp-
ton Beach PAC, Infinity Hall in Hart-
ford CT, the Blue Ocean Music Hall in
Salisbury MA and Dartmouth College’s
Spaulding Auditorium.Each venue offered a new monitor
console and a different make and model
of floor monitor. The time needed to
build a new file is not always available,
unless you’re able to carry a wide vari-
ety of off-line editors. Even so, moving
from one monitor console to the next
means switching from one show file to
another, so the previous file on a similar
console may be from a show that’s weeks
or even months old, requiring substan-tial tweaking during sound check.
Console choices over four weeks
in no particular order ranged from
Yamaha M7CL, Soundcraft Vi6, Allen
& Heath GL2200, Avid D-Show, Avid
SC48 (twice), Midas PRO2, Sound-
craft MH3, Yamaha PM5D (twice),
Yamaha CL5, and Allen & Heath
GLD. Even using Yamaha’s file con-
version software, we stil l would have
been on other consoles more than halfthe time. And while it’s possible to
Fig. 1
with reliable equipment
Flexible, durable multicore cable
systems
User-friendly cable solutions
Robust stagebox-systems
Custom-made cables & stage boxes
Large inventory and fast delivery
On the road…
SOMMER CABLE America
[email protected] Phone: 707-200 - 4020
American subsidiary for orderprocessing and customer service!
RE QUES T OU
R
$ 2 5 C A T AL O
G
F OR FREE
Made bySOMMERCABLE Germany
MADI connection systems
HD-BaseT extendermax. 328 ft.
Touring fiber system,IP 68 rated
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 20/68
18 Live Sound International September 2015 www.ProSoundWeb.com
::Spotlight ::
completely chart a desk, that also takes
time. The consistency of staying on
the same desk or file, night after night,
allows it to mature with daily input
channel and mix refinements, allowingmusicians to feel instantly comfortable
- like they’re stepping onto the same
stage over and over.
When working with “wedges du
jour,” a consistent set of mics and con-
sole are required for dependable results.
Using TouchMix’s graphic EQ with
Rational Acoustics Smaart DI to sys-
tematically flatten and contour thefrequency response of each day’s new
wedges is the beginning of a preset that
can be copied to every mix. Mix EQ
touch-ups are easily made with the iPad
at each mix, compensating for double
wedges or wedges hitting vocal mics
from the side (Figure 2).
TouchMix provides a 28-band third-
octave graphic equalizer on its six mono
mixes and on the main stereo mix, with
eight XLRs for easy interfacing with
power amps or self-powered loudspeak-
ers. While fully parametric EQ is consid-
ered best for tuning speakers, many agree
that for wedges, a graphic EQ is better
for balancing frequency response while
also managing gain before feedback. Third-octave ISO frequencies don’t
often fall where they’re needed, however
today’s manufactured floor monitors
exhibit fairly flat frequency response so
that their response can be managed with
a GEQ. There are sometimes a few sharp
peaks that fall between ISO frequencies,
but can be tamed using TouchMix’s four
notch filters (Figure 3).
WIFI & APP
TouchMix comes with a simple USB
WiFi dongle that works in uncluttered2.4 GHz environments and performed
Fig. 2
Fig. 3
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 21/68
www.ProSoundWeb.com September 2015 Live Sound International 19
well in 500-seat venues during our first
week. At the first larger venue, a greater
number of smartphones in the audience
overwhelmed the dongle, forcing opera-
tion from the TouchMix itself. The following day a dual-band 2.4/5
GHz “a-n” router was installed, con-
necting to TouchMix on the low band,
with it ’s SSID hidden, and connect-
ing to the iPad using its less congested
high band, where it worked flawlessly
in Manhattan, at the Newport Jazz Fest
and in Europe. A USB-to-Ethernet
adapter is an even more secure way to
get into a WiFi router.
iPad apps are great for monitor mix-ing, allowing operators to stand eye-to-eye
and ear-to-ear with performers on stage.
The TouchMix app is my new favorite. it
closely mimics TouchMix’s touch screen
and controls. The main difference is that
its Master Encoder jog-wheel is replaced
by up and down 1 dB fader “nudge” con-
trols that I enjoyed, good for both mixing
IEMs where smaller moves are better and
double or triple-tapping for wedges. The
iPad mini is slightly larger than Touch-Mix’s 7-inch screen and the app’s on-
screen faders are longer than the mixer’s,
though I prefer iPad’s even larger surface
for my big hands.
The app and the mixer’s GUI oper-
ate independently, so the iPad can act
as an extra user interface that shows and
controls different functions from those
controlled via the screen. This can beextended to multiple iPads, so that one
(or more) could mix monitors, while
another might be used for the FOH
mix even though TouchMix might be
located at the side of the stage. It would
even be possible to tile several tablets
together to display the entire TouchMix
console!
Substitute drummer Derrick Phil-
lips, who plays for Hank Williams, Jr.,
brought his custom IEMs and it waseasy to give him a hardwired in-ear mix
that he could control from his iPhone
from one of the TouchMix-16’s two
stereo auxiliaries by just using a head-
phone extension cable. The operator can
allow or restrict access to functions on
a per-device basis, keeping users from
adjusting anything but their own mix,
allowing the iPhone app to operate as a
personal monitor mixer.
For non-Apple users, QSC justreleased the Android version of the
app for tablets and smartphones that
requires Android OS 4.4.4 or newer and
TouchMix firmware V2.1.4922.
SIZE MATTERS
At 12 by 15 inches and 6 pounds,
TouchMix-16 is no bigger and slightly
lighter than my last Windows laptop.
Its cardboard retail box holds Touch-
Mix in a slim 13-inch by 22-inch fab-ric and hard foam zippered case with a
side compartment for its international
voltage power supply. Our trip to
Europe simply required using
an IEC cable with a Schuko
plug instead of an Edison.
SKB makes the injec-
tion molded 3i1813-7-
TMIX waterproof case for
TouchMix, with a custom
foam insert that accommodateseither model by removing a perforated
foam insert, plus a cutout for its power
supply, holding a standard or mini iPad
underneath. Not only does either case
meet carry-on restrictions, they even
fit overhead in smaller, three-acrossregional planes.
The latest firmware upgrade, version
2.1, includes options for Mandarin,
French, German, Russian and Span-
ish in addition to English, as well as
the ability to assign aux buses to the
left and right main outputs to act as
sub-groups.
TouchMix-16 is also capable of
direct recording all 20 (16 mic plus 2
stereo line) individual channels plus
one of its three stereo buses to a 7200
RPM external USB hard drive in 32-bit
broadcast wave format, and then play
those tracks back for virtual sound check
or virtual rehearsal.
If you’re looking for a mixer that cantake your band from rehearsal to promo-
tional appearance to support slot to fes-
tival stage and perhaps even headlining,
TouchMix is the smallest professional
solution you can carry with you in the
van and on the plane. ■
MARK FRINK is a long-time monitor
engineer and professional audio editor
and writer. He’s hosting the Live Sound
Expo at the 139th AES Convention in New York this October.
The author
mixing via
the Touch-Mix app.
TouchMix in its
SKB compactwaterproof case.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 22/68
20 Live Sound International September 2015 www.ProSoundWeb.com
F
:: Jekyll + Hyde Tour ::
rom the moment the Zac Brown Band first took the stage at
Nashville’s Bridgestone Arena, this year’s Jekyll + Hyde Tour left a
large footprint wherever it went. Bigger, bolder, and just plain brashly
beyond anything the group has ever staged before, the tour rolls with
stadium-ready production that easily adapts to sheds and arenas.Consider that the stage is three stories high, and, given the right place to stand,
illuminated with enough LED screens to be clearly seen from outer space. With
a set list known to feature no less than 14 of 15 cuts from the new Jekyll + Hyde
album, the show has additionally been graced with guest appearances by the likes
of Kid Rock, Jewel, and Bela Fleck. Choirs commonly sit in, and as a demonstra-
tion of its genre-bending prowess, the band has been covering The Beatles’ “Let it
Be” and Queen’s “Bohemian Rhapsody,” sauntered casually into EDM, and even
co-opted a quasi-show tune.
The tour, which is slated to wrap in December, will have completed nine stadium
dates before it ends, including the first show ever at Coors Field in Denver, two
shows at New York’s Citi Field, a three-night stand at Fenway Park in Boston, anda stop at Wrigley Field in Chicago.
CREDIT: ASSOCIATED PRESS
��
��
The audio scene on the Zac Brown Band’s
Jekyll + Hyde Tour. by Gregory A. DeTogne
Ready For
Perfect Marker
“If you’re trying to get your head around
what’s going on out here,” says systems
and FOH tech Preston Soper, “the
Fenway run makes a perfect marker. When we did that we had just come
out of Coors Field, went home for a
couple days, came back out and did a
arena in Boise, ID, went on to The
Gorge Amphitheatre, an iconic, very
large venue in Washington that some
consider one of the most scenic concert
locations in the world, and then right
into an amphitheater. To be successful in
these diverse kinds of environments, you
have to have the right tools to maintainboth sonic excellence and consistency.”
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 23/68
www.ProSoundWeb.com September 2015 Live Sound International 21
Soper, along with fellow audio tech
Chris Demonbreun and crew chief
Vic Wagner, meet the challenges of
these diverse venues with the aid of
an L-Acoustics K1/K2 rig supplied bySound Image. In a typical shed hang,
there are a dozen K1s per side on the
mains buttressed by six K1-SB cabinets
per side.
Kara cabinets spread out at a rate of
three per side for the main/underhangs,
while a sum total of 20 K2 enclosures
join in for aux coverage. In addition, a
dozen SB28 subs hug the ground and
six more Kara boxes stand-in at front fill.
“You can probably count on onehand how many sound checks we get
in a year,” Soper notes. “That’s why the
system’s consistency in performance is
so important to us. We get a line check
in the afternoon with the backline techs
and along with virtual playback, we’reable to hit our target curve for each
show with relative ease every night. A
nice, neutral curve is what we’re going
for, not too saturated in the low-end,
with a linear slope of about 3 dB per
octave from low to high.”
Powerful Tools
L-Acoustics Soundvision allows the
crew to render each environment in 3D,
place the loudspeakers in that virtualenvironment, and then view what the
EQ is and SPL will be over the entire
coverage area. The system is tuned
using an approach employing Ratio-
nal Acoustics Smaart IO and Focusrite
RedNet 4 mic preamps, a half-dozenISEMcon EMX-7150 measurement
mics, a Venue receiver from Lectro-
sonics, and a Ruckus Zone Flex T300
wireless access point.
“We’re using some powerful tools
before we even put anything up,” Soper
states. “A big part of being successful
every day is being able to do things effi-
ciently. We put out all six of our mea-
surement mics while tuning. We look at
everything on-axis and off-axis, and seehow it all comes together in real-time
The Zac Brown Band in
concert on the current
Jekyll + Hyde Tour.
CREDIT: KYLE RIPPEY/SOUTHERN REEL
The sound team hanging out withone of the Sound Image-supplied
L-Acoustics arrays. On the array are
Frank Sadler (left) and Vic Wagner,
and on the ground left to right are
Chris Demonbreun, Jake Bartol, Eric
Roderick, Andy Hill, and Preston Soper.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 24/68
22 Live Sound International September 2015 www.ProSoundWeb.com
:: Jekyll + Hyde Tour ::
A look at the full system during sound check at Nationals Park in Washington, D.C.
with Smaart at the console area. There
is no way we could do these shows as
fast as we need to without this level of
involvement.
“The L-Acoustics curve is really
spot-on and very musical right out of
the gate, but if you do your homework at
each stop quickly and accurately, you’re
going to have even better performance
over the entire coverage area,” he adds.For his part, front of house engineer
Eric Roderick was one of the primary
forces responsible for making the move
to L-Acoustics this year. “These are
bigger loudspeakers than we were using
before, and I definitely like them in the
stadiums,” he explains. “Our previous
rig did well, but every time I mixed on
an L-Acoustics system, I thought to
myself, ‘man, I gotta get back in front
of one of these’.” This system providesme with more of the body I want, and
I couldn’t be happier with everything
we’ve done so far this year.”
Moving Freely
Roderick – just like his counterpart,
monitor engineer Andy Hill – orches-
trates his mixes from behind a DiGiCo
SD7 digital console. With 112 inputs
coming in at his desk and a need for the
talent to move freely between the threedifferent levels of the stage, the show
is wireless-intense, with RF wrangler
and monitor tech Jake Bartol given
the task of keeping all the frequencies
aligned and functioning utilizing tools
that include IAS software, Sennheiser
WSM software, and Shure Wireless
Workbench 6. Frank Sadler is the
crew’s stage patch and Pro Tools guru.
While Zac Brown is indeed a pick-
shredding guitar player, Roderick saysthat his voice is “super-easy to work
with, he has great dynamic range and
belts it out. The only real trouble spots
– if you can call them that – are in the
800 Hz to 2K range. This is where I
have to squash things a little bit occa-
sionally. When he gets up high he loses
a little bit of low-end body, so I just
round it up with an upward lift in the
mid-low frequency range.”
Drawing from an acoustical paletteresiding entirely within his console, Rod-
erick relies heavily on Waves plug-ins,
with his favorite go-to tool for Brown’s
vocals being the C6 multiband compres-
sor. He also uses the C6 from the master
bus on the left/right mains to “kind of
squeeze down whatever may be sticking
out” as the occasion warrants. Further
benefits are realized with Waves CLA-
76 compression and some de-essing.
“I use the CLA-76 on Zac’s acous-tic, as well as on the violin,” Roderick
says. “And then I’ve really gotten into
one Preston turned me onto this year
called Center. It’s a stereo enhancer
plug-in a lot of people use for final
mixes and mastering. I use it on back-ground vocals and it spreads them out
really nice with fabulous imaging.”
When it comes to the totality of his
mix, Roderick builds his sound with an
emphasis on accurately translating that
which the band does so well onstage to
the crowd. “It’s about the band’s intrinsic
energy,” he imparts. “First and foremost
are the vocals. This is a very vocal and
harmony-oriented group of musicians, so
that’s always going to be square one forme, and everything else follows under it.”
Doing Many Things
Monitor engineer Andy Hill subscribes
to the notion that less is more in most
situations, even as he stands looking at
his SD7 that’s just about maxed-out in
terms of processing with the 160 inputs
he’s dealing with onstage.
“I couldn’t imagine doing this on
another platform,” he says with convic-tion. “I don’t think I could handle all the
ins-and-outs and complexities of what
we’re doing. My ability to essentially
do anything I want with any channel
or any button has been invaluable. We
have multi-instrumentalists onstage
that require different mixes for the dif-
ferent instruments they play. There are
a lot of people, guests included, doing
so many different things, and certain
songs are more complex than others.“The actual mixing is the most com-
plicated part,” he continues. “Different
people sing lead, play lead, there are a
multitude of different fills. Just keeping
track of that so everyone hears things
at the appropriate level and time keeps
me on my toes. I don’t go more than a
half second without moving a fader of
some kind.”
One way Hill keeps things as simple
as possible in his complex world is toset up his required input channels in a
C R
E D I T : K Y L E R I P P E Y / S O U T H E R N
R E E L
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 25/68
ANDREW DUBOWSKI / SAN FRANCISCO SYMPHONY
Read the full interview at
meyersound.com/sfsymphony
LEOPARD AND 900-LFCTHE NEWEST MEMBERS OF THE LEO FAMILY
“The more natural the sound, the more perfect the
amplification. LEOPARD’s sound is so natural, it fools
me into thinking the sound is not really amplified, even
though I know it is. That feels like magic.”
Andrew Dubowski,Director of Operations
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 26/68
24 Live Sound International September 2015 www.ProSoundWeb.com
separate fashion so that he can simply
un-mute them when they’re needed.
For example, for the band members who
play both guitar and keys on different
songs, he sets up separate channels that
accommodate both instruments. Then
he simply un-mutes them when required
and mutes them when they’re not.“This way, I don’t have to make an
actual level change,” he explains. “It’s
harder to get a level change exactly right
on the fly than it is to just mute and un-
mute a channel. I do the latter entirely
with the automation on the console, I
have a snapshot for each song. When I
change a snapshot, I know everything is
either correctly muted or un-muted for
everyone, and then I just concentrate
on balancing the mix.”
Fairly Quiet
When Brown plays electric guitar, it
runs through a pair of 4 x 12 cabinets
residing directly behind him onstage.
This fact notwithstanding, Hill still
describes his workspace as a “fairly quiet
stage,” with everyone tuned-in to the
proceedings courtesy of 20 channels of
Sennheiser SR2050 IEM receivers and
transmitters working with Jerry Harvey JH16 in-ear monitors, which give Hill
the low-distortion detail and accuracy
he’s after with increased headroom.
Brown’s lead vocals are captured via
a Sennheiser 5000 Series wireless unit
coupled with an MD 5235 capsule, a
pattern that repeats itself for the other
musicians when they need wireless else-
where on the elaborate set, and for back-
ing vocals. All instruments, including
horns, are spread across 22 channels of
instrument wireless. Wired microphones
for band members are Sennheiser e 935s.
Drums and percussion utilize a var-
ied collection of mics, with kick sound-ing forth via a Shure BETA 52, Shure
SM57s on snare, Sennheiser e 604s
on toms, a Shure SM7 for high-hat,
Sennheiser e 604s applied to rack and
floor toms, large-diaphragm AT-4050s
from Audio-Technica positioned as over-heads, and a percussion section served by
a phalanx of more SM57s, Sennheiser
MK4s for overheads, and other offerings.
Daring Moments
To be sure, there are daring moments to
be witnessed on the Jekyll + Hyde Tour,
both in a technical sense and among
the excursions made by the band into
uncharted territories, whether they be
with guest artists like Kid Rock leadingthe crowd in a sing-along of Stephen
Stills’ “Love the One Your With” or
taking on songs like “Beautiful Drug”
with its house-resonating bass loops
and club-sounding synths.
“Anything can happen out here,”
Hill says on a parting note. “You just
have to be ready, otherwise you’ll find
yourself quickly chasing your own tail.
That’s what has always made this one of
modern country’s most compelling acts.
Whatever happens going forward no
one can truly say with any certainty. Just
be ready for more, that’s my advice.” ■
GREGORY A. DETOGNE is a
writer and editor who has served the pro audio industry for the past 32 years.
Eric Roderick at the
front of house controls
at Nationals Park. C R E D I T : K Y L E R I P P E Y / S O U T H E R N
R E E L
C R E D I T : K Y L E R I P P E Y / S O U T H E R N
R E E L
Andy Hill mixing
monitors, with RF/
monitor tech Jake
Bartol next door
at his workstation.
:: Jekyll + Hyde Tour ::
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 27/68
Soundcraft T: +44 (0)1707 665000 E: [email protected]
Soundcraft US T: 888-251-8352 E: [email protected]
Find out more at soundcraft.com
The control you lovewith the power you needThe latest Vi5000 and Vi7000 digital mixing consoles deliver the
best Vi sound ever, bringing upgraded channel counts and even more
reliable hardware to live sound’s most popular mix interface.
The latest Vistonics™ &
FaderGlow™ interface
Up to 128 inputs and
32 mono/stereo busses
Enhanced audio processingwith 96kHz sample rate option
Mix live with UA ™ plug-ins(via Realtime Rack)
Huge connectivity options –Dante™
, Rocknet™, Ethersound™,
Cobranet™, MADI and more
werful new features includingBSS DPR901ii Dynamic EQ
128 channel record interface viaMADI or Dante™
New Local Rack hardware for
384 I/O channels
AKG and Shure Wireless
mic monitoring
Po
NEW!
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 28/68
26 Live Sound International September 2015 www.ProSoundWeb.com
Microphone stands, clips, and cables
are some of the most underappreciated
items we use at every gig. Yet without
stands, clips and clamps to keep mics in
place, they won’t be able to pick up the
vocal or instrument. And cables are a
true lifeline of every system. It’s amazing
how many times I’ve seen a fantastic micconnected to a great PA via a lousy cable
that ruins the whole thing.
Bad cables are the biggest source
of problems at shows, and folks in our
business spend countless hours tracking
down problems that they (and related
issues) cause when troubleshooting
at gigs. Many of these problems can
be prevented by choosing the proper
cables combined with appropriate PM
(preventive maintenance) before the gig.So what constitutes a good mic cable?
There are some problems with using
high-Z mics. High impedance cables
perform like a low-pass filter, cutting the
high frequencies – with the severity of theloss determined mostly by the length of
the cable. Another problem is that high-
Z cables are much more susceptible to
electromagnetic interference (EMI), also
called radio frequency interference (RFI)
when the noise originates from the radio
frequency band. These issues make cable
runs longer than 20 feet problematic.
Using a low-impedance (usually
under 200 ohms) mic solves the cable
length issue. Standard analog low-impedance cable runs from 45 to 70
ohms. Digital cables need to be between
88 to 132 ohms to meet the AES/EBU
standard, with 100 to 120-ohm cables
being common. It’s O.K. to use a digital
cable for an analog signal, but not the
reverse because the lower impedance
from an analog cable can cause bit errors.
While low-impedance cables do suffer
from high-frequency loss over distance,
it’s with a much reduced effect. Oper-ating distances of hundreds of feet are
common with low-Z cable runs, with no
appreciable loss of signal quality.
To help combat noise, mic cables oper-
ate on the balanced principle and contain
two insulated conductors that are twisted
together inside a shield under the outer
jacket. The conductor that is in phase with
respect to the signal source is call the “hot”
wire or plus (+) signal, and the conductor
that is out of phase with the signal sourceis called the “cold” or minus (-) signal.
The audio signal is applied to the
pair of conductors differentially; that is
to say, one wire has the polarity of the
signal reversed but the levels are the
same. Any noise or outside interference
that gets into the signal lines will mostly
be defeated because one conductor trans-
mits the noise with a positive polarity
and the other is at a negative polarity.
When signals with opposite polarity(in this case, the noise) are combined,
It’s rugged yet flexible, shielded to help
reject interference, uses two or more
twisted current carrying conductors of
the right impedance, and is terminated
with quality connectors. Whew! That’s a
lot of stuff for a humble cable. Let’s break
things down, starting with impedance.
CABLE ANATOMY 101
Impedance is the resistance in an alter-
nating current (AC) circuit, expressed in
ohms and often abbreviated as the letter Z.
Early mics were typically high-impedance
models (approximately 10,000 ohms) that
were capable of producing higher output
voltages than their lower impedance coun-
terparts. It was cheaper to design mixer or
recorder input sections for high-Z mics
because their higher outputs required lessamplification than low-Z mics.
Keeping up to speed on microphone accessoriesand cable. by Craig Leerman
UNDERVALUED ASSETS
SHOWCASE
��
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 29/68
© 2015 QSC Audio Products, LLC. All rights reserved.QSC, and the QSC logo are registered trademarks in the U.S. Patent and Trademark Office and other countries.
THE WORLD’S MOST
POWERFUL
8-Channel Mixer
Big claim for a small mixer, right? When you experience TouchMix for yourself, you’ll agree that it’s not hype - it’s the realdeal. You’ll hear sonic clarity only found on the most high fidelity audio devices in the world. You’ll find a feature set that isequal to some of the most-used professional consoles on tour today. And, you’ll discover what no other digital mixer givesyou - an easy to understand and easy to use product that delivers control, flexibility and above all else, professional results.That’s real power. That’s TouchMix.
qsc.com
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 30/68
28 Live Sound International September 2015 www.ProSoundWeb.com
::Showcase ::
they will cancel each other out. The rea-son the inner conductors are twisted is
that it allows external noise to be intro-
duced to both signal conductors equally
(or as equally as possible) and improves
the common-mode rejection ratio.
Some cables use four inner conductors
(two pairs of two) that offer better rejec-
tion from outside EMI like transformers.
The downside is that these “quad” cables
are more expensive and may be less flexible.
The outer shield is just as impor-tant as the inner conductors as it helps
block unwanted noise from EMI, RFI,
and even electrostatic noise from things
like fluorescent lighting. Shields are
made from small copper wires that are
braided (woven) or wrapped around thecentral insulated conductors, or they can
be made from a conductive foil.
Braided shields are usually found in
quality cables because they can provide
more than 95 percent surface cover-
age. However, they’re less flexible than
wrapped shielded cables.
Spiral wrapped shields are very com-
mon and offer great flexibility at the
cost of a little less shield coverage. Foil
shields offer 100 percent coverage butdon’t provide much flexibility and can
break under repeated flexing. Their use
is limited to cables that don’t get flexed
like in an install, or for use in snake cables
that don’t bend into tight radiuses.
Three-pin XLR connectors are used
with low-impedance mic cables and are
normally wired pin 1 connected to the
shield, pin 2 hot (+), and pin 3 con-
nected to the cold (-). A standard mic
cable has an XLR female connector atthe microphone end, and a male XLR
connector at the console end.
The female end has a locking mecha-
nism that will lock to a microphone or
a standard male XLR connector. Some
panel-mount female connectors found on
stage boxes or consoles can also feature
a locking mechanism, but many do not.
Quality connectors from companies like
Switchcraft or Neutrik should be used to
ensure long life and proper connectivity.
USAGE & MAINTENANCE
Cables should be cleaned regularly and
quickly inspected after every use while
being coiled. If a flat spot or cut is discov-
ered, the cable should be pulled from ser-
vice until a thorough examination can be
made. Speaking of coiling, cables should be
secured with Velcro straps or theatrical tie-
line (a.k.a., trick line) after they’re wrapped
up. Some folks like to secure a cable to itself with a half hitch knot, but that weakens the
cable and can leave gaps in the shield.
In use, try to run microphone cables
out of harm’s way where they won’t getdamaged by people walking on them or
trunks and carts rolling over them. If
a cable must be run where it might be
stepped on, tape it down securely and
cover it with a rug or rubber mat. Also
tape all around the perimeter of the rug
or mat so it won’t slip. Cables running
in higher traffic areas, or areas where
wheels might roll across them, should be
covered by ramps so they’re protected.
Always use gaffer tape – not duct/duck or masking tape. It holds better
and won’t leave a sticky residue on the
floor or on the cables. For general clean-
ing of outer cable jackets, I use a cleaner/
degreaser called Simple Green. For
removing sticky tape residue (and this
applies to other gear as well), the choice
is Goo Gone, a Citrus-based cleaner.
When that won’t cut it, I switch to a
stronger solvent called Goof Off, which
contains acetone, so caution is stronglyadvised. It will eat through many materials,
so just use enough to get rid of the gunk in
the affected area, and then thoroughly wash
the area clean of any remaining solvent.
COMMON PROBLEMS
Stands, clips, claws and clamps tend to
fly under the radar until they don’t work.
As a result, schedule a yearly inspection
and preventative maintenance session
for all of these items to keep them per-forming as intended.
(Top) Eurocable mic cable from
Link, consisting of two insulated
twisted conductors and drain wire,
all shielded with spiral copper for
efficient shielding. (Bottom) Link euro-
cable Starquad mic cable, offering
four conductors.
Neutrik XX-HE Series male and female
3-pin XLR connectors, and wiring
diagrams for both.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 31/68
www.ProSoundWeb.com September 2015 Live Sound International 29
One common issue with stands and
clamps is missing bolts that have loos-
ened and fallen out after a gig or dur-
ing transport. Replacement parts should
be available from the manufacturer, butif not, your local big box hardware store
should have something with the correct
standard or metric thread size that should
work. If not, try J.W. Winco (www.
jwwinco.com), which stocks a
wide variety of wing,
knurled, and handled nuts and bolts.
Another common problem is missing
rubber feet from tripod legs. Hardware
stores sell rubber chair tips in a variety of
sizes that could fit. Further, threads onstands tend to get damaged over time.
Fortunately they can be easily repaired
with just a few tools. Thread sizes for
North American stands are 5/8-27TPI for
the tube that connects to the mic clip, and
7/8-27TPI for the larger tube that goes to
an Atlas-style cast iron base.
If the threads are just slightly damaged,
use a die to “chase” the existing threads
and clean them up. If the threads are too
far gone, simply use a pipe/tube cutter andcut off the damaged threads, then use the
die to cut new threads. If you have trouble
finding the right die size, try JTS Machine
(http://jtsmach.com) and/or McMaster-
Carr (www.mcmaster.com) .
Repair parts are usually available
from the manufacturer for bad clutches
on stands. I just repaired some Atlas
stands in my inventory with Atlas
MSCE-K clutch repair kits and saved a
bundle over buying new stands.Don’t forget to check your clips! Mine
have a habit of loosening their own tilt
screws when nobody is looking. A few years
ago I got tired of the plastic clips break-
ing so invested in rubber clips to replace
them. They’re more rugged and often stay
attached to the stands all the time, but
they’re not as sturdy in holding up heavy
mics, so now we bring both styles to shows.
A little attention to all of these items is very
much worth the effort, both in terms ofday-to-day reliability and fewer problems
at gigs where time really counts. ■
Senior contributing editor CRAIG
LEERMAN is the owner of Tech Works,
a production company based in Las Vegas.
Keep an eye on mic clips, which are
often subject to a lot of stress from
show to show.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 32/68
30 Live Sound International September 2015 www.ProSoundWeb.com
�� IN 1878, A ROOM FULL of people
watched Thomas Edison’s new pho-
nograph spin and heard a voice read
“Mary Had A Little Lamb.” Despite
the excitement of hearing the first audio
recording, I’ll bet someone thought,
“That sounds like crap.” Having heard
the recording, I agree.Mixing the spoken word is a task
in itself, but to mix singers and blend
them with a band is an even more
daunting task. Singers produce a range
of sounds, good and bad, and no two
voices are alike. This means each vocal
must be uniquely mixed. What works
for one person’s voice isn’t right for
another. The good news is that I’ve
identified seven areas of vocal mixing
to focus on that take a lot of the hassleout of the process.
set at 180 Hz. My process is to roll it
higher and higher until hearing a nega-
tive impact on the voice, and then pull
it back a few hertz.Male vocals can have excessive low
end, so console functionality permitting,
also take a 3 to 6 dB cut in the 250 to
350 Hz range. This eliminates the mud-
diness in most male vocals.
REMOVE HARSHNESS
There’s no such thing as a perfect sing-
ing voice. Even the best singers have
slight imperfections in the sounds they
produce. ( Just don’t tell them I saidthat.) These imperfections are usually
in the 2.5 to 4 kHz range.
Find the sweet spot to remove the
harshest frequencies. With an ana-
log console, use its sweeping-mid or a
graphical EQ frequency selector. Start
at the 4 kHz point and apply a 6 dB cut.
Then slowly sweep that frequency down
until the vocals clear up. Next, decrease
or increase the cut as required.
Analog consoles have a fixed band- width and therefore the cut will affect
frequencies centered on the primary
selected frequency, though in lesser
amounts, like an upside-down moun-
tain. However, this bandwidth (Q)
can be altered on digital consoles. The
tighter the bandwidth for cutting the
better, because harsh frequencies are
best removed with surgical precision –
though without the worry of a malprac-
tice lawsuit.
TURN ON THE LIGHTS
Add brightness to the vocal with boosts
to select high-end frequencies. The
boost creates a bright and sometimes
airy sound. The amount to add depends
on the style of music, the song arrange-
ment, the vocal, and what sounds good
in the room.
Apply a gentle boost of 3 to 4 dB
above the 6 kHz point. Sweep thispoint up until it produces the desired
ROLL IT OFF
There’s no reason for low-end frequen-
cies to be in a vocal channel. Unless it’s
an acapella group, musical instruments
such as the drum kit, bass, and to a lesser
extent electric guitar should be the only
things that populate the sub-200 Hz
frequencies. A vocal microphone can pick up
these sounds, either directly or through
stage monitors, as well as any extraneous
low end from the singer. Remove these
by using a high-pass filter.
The filter can be fixed-point, such as
rolling off frequencies below a set point,
usually in the 80 to 120 Hz range, or
it can be a variable filter. My personal
preference is to roll off at as high a point
as possible. For example, I regularly work with a singer that needs the filter
Seven keys to making it sound like youwant it to sound. by Chris Huff
VOCAL MIXING BASICS
FRONTLINES
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 33/68
Exclusive US distribution: Group One Ltd. Toll Free 877 292 1623 www.g1limited.com
www.digico.biz
SD5Impressing audiences
(and engineers) around the globeSD5 Live Digital Console with Stealth Digital Processing™
The universal, number one, console of choice. If it's not DiGiCo, it's not worth it.
Set yourself free with theDiGiCo SD app
NOW AVAILABLE TO DOWNLOAD.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 34/68
32 Live Sound International September 2015 www.ProSoundWeb.com
:: Front Lines ::
results. This is easy with consoles that
have more than one sweeping-mid.
In the case of consoles without, use
the peaking high-end EQ control to
increase that boost for all the high-endfrequencies.
MAKE IT SMOOTH
Despite the previous steps, a vocal mix
can still be wanting. The bad stuff ’s
gone, and it’s got some sparkle, but it’s
not quite there. Enter Mr. Smooth.
There’s a danger zone in the mid-
range. One wrong move and the vocals
can sound flat and dull or harsh and
annoying. Welcome to the 1 to 2 kHzrange. Sweep a tight cut in this range.
This can be more of a problem area
than the 2.5 to 4 kHz range, so when
limited to the number of frequency
manipulations, opt for which has the
greatest impact.
BRING OUT THE BASS
Some lower-mids might be needed to
add substance to the voice. Boost in
the 200 to 600 Hz range. As noted
earlier, vocal characteristics vary widely, so whi le some singers might
have plenty of energy in this range,
others might be in desperate need of
it. Don’t make them sound like some-
one they ’re not; rather, the goal is to
make them sound like a better version
of themselves.
Earlier, I mentioned cutting in the
300 Hz range for male vocals. But
doesn’t this contrast with the aforemen-
tioned tip on boosting? Yes. No. Maybe.Mixing is a process of additive and
subtractive measures. The difficulty is
in deciding what to do first. I’ve found
the most success in removing as much
of the bad as possible, and then lis-
tening to what remains and boosting
where appropriate.
A vocal that’s devoid of much in
the 300 Hz range is a vocal that’s not
going to have the natural muddiness and
therefore might be a prime candidate forsuch a boost. This doesn’t mean mud-
diness is added. It just depends on the
specific voice characteristics as well as
the style of music.
OTHER CHANNELS
Time to work on the other channels.
Much of the natural voice is in the
mid-range frequencies, and so are the
fundamental frequencies of most other
instruments. Part of mixing a good vocalis making room for it in the mix. The
vocal needs to own the primary area
where it shines through. This doesn’t
come by boosting only the good – it
also comes by carving out space from
other channels.
D.A.S. Audio, S.A.
C/ Islas Baleares, 2446988 Fuente del JarroValencia - SpainTel. +34 961 340 860
www.dasaudio.com
D.A.S. Audio of America, Inc.
6900 NW 52nd StreetMiami, FL 33166 - U.S.A.Toll Free: 1 888 DAS 4 USA
D.A.S. Audio Asia PTE. LTD.
3 Temasek Avenue, Centennial Tower #34-36Singapore 039190Tel. +65 6549 7760
A WINNING TEAM!
If live sound is your gig, then here is a combination thatcan´t be beat. The powered Aero 20A compact line array,teamed up with the LX-118A and the UX-221A (yes, 2 x 21”!)powered subwoofers. Featuring extremely ecient ClassD amps, our convenient “Cardioid Preset” function andDASnetTM connectivity for remote monitoring and control,this team gives you the repower and exibil ity needed
to handle small, medium or large scale events.
Contact us and we´ll show you how to win with D.A.S.!
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 35/68
www.ProSoundWeb.com September 2015 Live Sound International 33
Look to vocal and instrument
channels that clash with the vocal.
Determine which “owns” that primary
frequency area, and then adjust the
others by applying a slight cut in thatarea. I’ve gone back and found I had
two channels where both had the same
frequency boost applied – of course
they clashed.
THE ONE QUESTION
Audio production is part science and
part art where too often the scientific
mind is allowed to dominate. This hap-
pens a lot with EQ work. During any
of the above processes, you might askthe question, “Does this sound good?”
The question (and its answers) come
from trial and error. Boost here, evalu-
ate. Boost there, evaluate.
There’s another way. During the
vocal mixing process, imagine how the
vocalist should sound. Ask these ques-
tions: What frequency areas dominate?
What areas are minimal? How does it
fit into the overall mix?
Then go to those key mix areas, suchas using the high-pass filter or adding
brightness, and apply those measures
so they meet the sound in your head.
A great vocal mix can be imagined and
then worked towards. It’s much harder
and less likely to be obtained through
trial and error.
This process isn’t easy for those
new to the EQ process and frequency
band characteristics. But learning is
just a matter of time and practice. Thekey is asking the one question that
matters: “Does it sound like I want it
to sound?”
Use the above mixing areas to
improve vocal mixes. Once the vocal
channel is sounding great, reach for the
reverb. Or don’t. It depends on a few
things, now doesn’t it? ■
CHRIS HUFF is a long-time practitio-
ner of church sound and writes at Behind
The Mixer (www.behindthemixer.com),
covering topics ranging from audio fun-
damentals to dealing with musicians –
and everything in between.
MIPRO’s MI-909, featuring the industry’s smallest bodypack receiver, operates across
64MHz of bandwidth with multiple presets allowing 16 channel operations. With
innovative digital technology offering a frequency response from 20Hz to 15kHz,
112dB of dynamic range, onboard DSP, and digital diversity reception, MIPRO’s
MI-909 system boasts unmatched features, digital audio clarity and functions that
easily surpass the competition.
Digital crystal-clear sound quality, unparalleledRF reliability and digital encryption protection.
Digital Wireless Stereo IEM SystemMI-909
Distributed in USA by Avlex Corporation
6655 Troost Avenue, Kansas City, MO 64131
| Tel: 816-581-9103 | Fax: 816-581-9104 | Email: [email protected] | www.avlex.com
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 36/68
34 Live Sound International September 2015 www.ProSoundWeb.com
THE MERCEDES-BENZEvolution
tour is designed to attract millennials
by combining sophisticated automo-
biles with cutting-edge live music, per-
sonal style activities and interactive art
exhibits. The ongoing U.S. tour rolled
out in New York City followed by dates
in Chicago, Los Angeles, Atlanta and
Austin, expected to draw up to 3,000music enthusiasts that have expressed
interest in the automaker’s brand.
Miami-based SRX Events has
teamed up with Mix3 Sound, also based
in Miami, to provide full production for
the tour. Mix3 is tasked with deploying
sound, video and lighting systems for each
event, with owner John Ferlito choos-
ing to roll out his new Eastern Acoustic
Works (EAW) Anya line arrays. “I looked
at many different line array systems andtalked to a lot of audio professionals in
“most sought-after DJ of the world,”
DJ Ruckus, followed by British rock
band Bastille or Passion Pit,
an “indietronica” band fromMassachusetts.
“The tour was always going
to be a challenge because each
of the venues was completely
different,” says Ferlito. “New
York and Los Angeles were simpler,
because those venues were equipped
with house PA systems, while in Chi-
cago, Atlanta and Austin, we’re han-
dling everything.”
Part of Navy Pier’s original 1916 con-struction, the 18,000-square-foot Aon
Grand Ballroom has a sweeping 80-foot
domed ceiling, a large platform stage at
the front of the room, and panoramic
views of the Chicago lakefront via win-
dows in the other three walls. For Evolu-
tion, the main floor offered a dance floor
surrounded by several bars, numerous
Mercedes-Benz vehicles, and interactive
attractions. The balcony, which wraps
around the room, provided a VIP area andalso served as the front of house location.
“It’s a large, reverberant space, so we
directed most of the sound on the main
floor and kept it off the walls and ceil-
ings as much as possible,” Ferlito notes.
“Because the only place for FOH was
Miami before making my decision – it
was an investment for now and the
future,” Ferlito explains during a stop at
the Aon Grand Ballroom at Navy Pier in
Chicago. “When I heard Anya I knew it
was exactly what we were looking for. It
still amazes me how easy it is to use whilesounding so great.”
VARYING VENUES
Each date offers a performance by
Grammy Award-winning musi-
cian/DJ ?uestlove or GQ magazine’s
Breaking in a new rig
on the Mercedes-Benz
Evolution tour.
by Sam McLean
TEST DRIVE
ONTOUR
��
A perspective of the EAW
Anya arrays and the cover-age area for the Evolution
tour stop at the Aon Grand
Ballroom on Chicago’s Navy
Pier. (Inset) Indie band Bastille
guitarist Will Farquarson per-
forming on the tour.
Mix engineer Paul Cooper and
his Avid VENUE console at the
unusual front of house position
at the Aon Grand Ballroom.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 37/68
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 38/68
36 Live Sound International September 2015 www.ProSoundWeb.com
:: On Tour ::
the balcony, we had to aim some sound
up there as well.”
The PA consisted of left-right arrays
each made up of eight self-powered
Anya modules, with six EAW SB1002
dual 18-inch subwoofers ground stackedtwo-high/three-wide beneath. Compact
EAW JF56NT loudspeakers placed
on top of the subs delivered front fill,
while another JF56NT was positioned
center stage to provide monitoring for
Bastille. The subs and fill loudspeakers
were both driven by Crown Audio MA
5000i amplifiers joined in their stage-
left racks by EAW UX8800 DSP.
DIRECTIONAL NATUREPaul Cooper, Bastille’s long-time engi-
neer, mixed on an Avid VENUE SC48
digital console from his balcony perch.
“The footprint and features are every-
thing we need when doing shows of this
size,” Cooper says, pointing specifically
to plug-in and Pro Tools support as two
of the console’s bigger plusses.
This was his first time out with
Anya, Cooper notes, and he found it ’s
directional nature appealing, while still
offering enough coverage flexibility to
render out fills unnecessary. All of the
22 transducers in each Anya modulereceive independent power and pro-
cessing, working hand-in-hand with
the Resolution 2 simulation program
that predicts the performance of arrays
within a venue. Once the parameters are
input into the software, the arrays pro-
duce a customized three-dimensional
wavefront that delivers phase-coherent,
full-range response across the coverage
area as defined by the user in real-time.
“Resolution makes the set-up of thesystem straightforward,” Ferlito says.
“Once you’re familiar with the program,
it’s simple to enter the required infor-
mation and let the software determine
how many boxes are required to ensure
even, consistent coverage throughout
the venue.”
“Navy Pier isn’t the easiest place to
work, especially with the mix position
(on this occasion) up on the balcony,”Cooper adds. “The lack of real treatment
and the ceiling bowl create somewhat of
a chamber, which is better suited to lower
volumes.” In addition, as a corporate show,
the usual audience absorption wasn’t what
it normally would be, with most of the
floor space occupied by the stalls and car
displays, adding to the acoustic challenge.
“Despite that, the clarity of the system
shone through, and things were legible
and clear,” he continues. “I’d like to hearthe system in a more controlled environ-
ment, but I think I would happily recom-
mend it as an option to people based on
its top-end clarity and spread alone.”
With the Chicago date occurring
early in the tour, Ferlito points out that
there’s still plenty of work to be done
to prepare for the remaining stops. “I’ve
not been able to scout the other venues
yet, but that’s another reason I feel com-
fortable with our decision to use Anya.It’s an extremely flexible system that is
simple to set up and tear down.
“And if there’s a change in plans?
If they add balcony seating or expand
the show floor at the last minute? We’re
OK,” he concludes. “We don’t have to
take it down and modify the arrays, we
just make a few adjustments in the soft-
ware and it’s all set.”
SAM MCLEAN is a long-time writer working in pro audio, based in the U.S.
Looking up at the distinct profile of one
of the Anya arrays flown in Chicago.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 39/68
Free yourself from the confines of FOH.
With the DL32R, you get 32-channels of
powerful digital mixing that’s completely
controlled wirelessly — MIX FREE.
mackie.com/DL32R
EVERYTHING
ANYWHEREFROM
Master Fader: Intuitive wireless control overeverything, proven at more than 2 millionlive mixes
01
02
03
04
05
Hardware: Flexible,professional I/O in an incrediblycompact 3U rackmount design
Wireless: From mic pre gain to control overmulti-track recording and playback
Recording/Playback: Complete wirelesscontrol over multi-track direct-to-driverecording and playback
DSP: Powerful processing on all inputs andoutputs that replaces racks of outboard gear
iPad is a registered trademark of Apple Inc., registered in the U.S. and other countries. ©2015 LOUD Technologies Inc.All rights reserved. Wireless router and iPad required for operation (not included).
H e y M a r s e i l l e s .
N e c t a r L o u n g e .
S e a t t l e ,
W A .
0 9 . 1 7 .
2 0 1 4
Freedom
from FOH –mix fromanywhere!
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 40/68
38 Live Sound International September 2015 www.ProSoundWeb.com
THE FIR ST “BIG” mixing consoles
I owned were a 12-channel Kelsey and
a 16-channel Yamaha PM1000. The
Kelsey saw the most use because the
PM1000 weighed in at 110 pounds,
and that was without the wooden case
I built for it.
With a limited number of channels,
buses and features available, I learned
to be quite frugal when deciding what
to mike onstage. For larger shows, theKelsey sometimes served as a sub mixer
for the drums and bass, feeding the
Yamaha.
One day a buddy asked me to mix on
his rig at a large outdoor jazz festival.
It sported a 32-channel PM1000, and I
was in heaven for two reasons. First, he
didn’t ask me to help lift or move it, and
second, I didn’t have to pick and choose
what to put in the PA. With 32 inputs
I could mike up everything onstage andstill have empty channels.
Regardless of the size of the console,
sometimes we have to be a little “cre-
ative” to get the desired results. Here are
some things I do.
DOUBLING UP
When running both front of house
and monitors from the same console,
it means that the monitors either share
the same channel EQ dialed in for the
mains (post EQ sends) or they do not
get any EQ at all (pre EQ sends). This
might not cut it for a picky performer or
an acoustic instrument.
What I do is use a simple splitter boxto send the microphone or DI to two
channels instead of one. The first chan-
nel is for the house mix and the second
(usually adjacent to the first) can be
“dialed in” with an acceptable EQ for
the monitors.
On smaller acoustic shows, I might
place every input into two channels,
effectively providing separate house and
monitor consoles. If there aren’t enough
splitter boxes handy, I can use a chan-nel’s direct output to feed the second
channel. On a digital console that offers
channel patching, simply patch an input
to more than one channel in the menu.
I’ve also used a second channel for
singers who want a significant amount
of effects in their monitors but don’t
want to hear the effects when they ’re
talking in between songs. Sure, I could
mute the FX masters, but on most of
my consoles they’re on a different layerby default. Using the second channel
for effects to the monitors, I can sim-
ply press the convenient mute button to
stop the effects as needed.
It’s also easier to dial in a good mix of
“dry” verses “wet” vocals in the monitors
because I can simply send dry effects to
the monitors from one channel, and
then wet it up as needed with the sec-
ond channel.
Another use for second channels ismaking a killer board recording. Many
Lacking, however, were moni-
tor buses, but it was a problem easily
solved back then by routing inputs to
one of the four mix matrix buses and
using those to feed stage wedges. Not
as ideal as having individual aux sends
on every channel, but musicians were
aware of technology limitations and
were happy to get more than one mix
in those days.
Fast forward to today. One of mysmall digital consoles offers 66 process-
ing channels and up to 14 mono buses
in a rack-mount form factor. With
onboard GEQs, FX units, comps and
gates, there’s no need to carry outboard
gear, and it can be picked up effortlessly.
But as full-featured as these smaller
boards are, bigger is often still better
because clients always seem to need
another feed or send somewhere, and
there’s almost always extra inputs thatshow up at the last minute.
Techniques for when the console has too few – or
extra – channels. by Craig Leerman
CREATIVE STRATEGIES
INFOCUS
��
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 41/68
www.ProSoundWeb.com September 2015 Live Sound International 39
of us make recordings of live shows,
and there are a lot of ways to do it.
“Down and dirty” board tapes can be
had by taking a copy of the main L+Routputs and sending them to a stereo
recording device. Newer digital consoles
may offer the option of recording a ste-
reo feed to a USB drive, but the mix
and some instruments may not sound
“right” because they were equalized and
balanced to be heard through the PA
rather than a recording.
Multi-track recordings can be attained
by sending the channel direct outputs to a
recorder or splitting off the inputs with asplitter snake or grabbing the inputs off a
digital network – but this involves using a
stand-alone multi-track recorder and pos-
sibly a lot more extra gear.
Sometimes all that’s needed is a good
stereo board tape. Sure, you can set up
a mix using an aux send, but this raises
the problem of sharing the EQ with
the house PA. Using second channels
on instruments or vocals that have been
“overly adjusted” to sound good in thehouse can result in a better recording
because you can have control over dif-
ficult stage sounds as well as EQ directly
for the recording.
MATRIX MIXING
For years I carried around a line-level
distribution amplifier in my rack because
I was always running out of outputs on
the corporate-type shows that make up
the majority of my work. I might onlyneed a few inputs but dozens of out-
puts for the main loudspeakers, delay
and fill loudspeakers, as well as feeds to
the venue for underbalcony fills, lobby
systems, overflow rooms, onstage andbackstage monitors, video and safety
recordings, intercoms and dressing
rooms, etc.
This is why I gravitate to consoles
that have extensive matrix sections. In
its most simple form, a matrix takes a
selection of inputs (usually derived from
the group and main output buses) and
allows routing of those signals, complete
with level control, to a series of outputs.
Complex matrix systems offer the abil-ity to choose from a variety of inputs,
including specific channels or external
sources, and may supply processing that
includes EQ, compression, limiting and
even signal delay.
A matrix adds a ton of flexibility to
a console and gives the user a lot of easy
solutions to routing problems, like add-
ing a support act console. While there are
many ways to tie two or more consoles
into a single PA, more than a few timesI’ve simply patched the support act con-
sole into the external matrix input on the
main console and fed the PA from both
consoles through the matrix out.
Another good use for a matrix is cre-
ating mix-minus feeds. This refers to a
program feed that has been remixed to
exclude one or more input components.
Sometimes the video people might
want the program audio minus the
playback audio they’re sending tofront of house, or
teleprompter
operators want
to hear the pro-
gram feed but
with less music.
I can whip up
a quick mix-
minus by routing
the various parts of the
program through subgroupsand into the matrix. Levels of
each feed can then simply be adjusted
as needed.
A trend I’ve been seeing of late is pro-
viding audio feeds for remote meetings. Ineed the audio from the remote site in the
PA, but don’t need to send it back to them.
so I’ll create a mix minus of the remote
audio by using the matrix, and then add
processing like leveling and compression
before sending to the remote site.
More than a few times I’ve been mix-
ing monitors from a smaller front of house
board and have run out of aux sends.
Using a matrix, I’ve set up side fill mixes
as well as individual performer mixes.
ADDITIONAL PURSUITS
One great feature about larger consoles
is, of course, more channels to use. I can
employ back-up mics or run back-up
lines without having to re-patch. Ever
wonder why there are two mics on the
podium at high-level events? One is
normally not on, serving as a spare that’s
already in place in case there is a prob-
lem with the main podium mic. Simplyun-muting this mic keeps the show roll-
ing. It’s the same reason we place two
lavalier mics on important presenters
at corporate shows or on lead actors in
theatrical performances.
Note: sometimes two different pat-
tern podium mics are used, like a car-
dioid and supercardioid, with the mix
engineer choosing between the two,
depending on the person speaking.
Larger channel counts allowme to do some things nor-
mally not pursued when I’m
running out of inputs.
For example, instead
of choos ing
between
An 8-channel version of the author’s
12-channel Kelsey console, circa the
mid-1970s.
Even smaller-format consoles
like this Yamaha QL1 afford
capabilities not imagined arelatively short time ago.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 42/68
40 Live Sound International September 2015 www.ProSoundWeb.com
:: In Focus ::
two overheads, or a single overhead
and a ride cymbal mic, I’ll probably
use two overheads and a ride cymbal
mic on the kit. Same with snare drum.
With enough channels, I often opt for
a bottom snare mic to pick up the snap,
capturing a better overall drum sound.
Extra channels can also be turned
into an ad hoc intercom system. I place
a mic at front of house, plug it into a
spare channel and send it to a poweredloudspeaker placed backstage via an
aux send. A mic placed backstage is
routed to a second spare channel, and
by pressing that channel’s PFL button,
I can hear the person backstage on my
headphones. Not perfect, but when the
intercom power supply loses its magic
smoke 15 minutes before a cue-heavy
show, you do what you have to do.
One more use for extra channels is
“phantom mixing.” Ever get to the point where you’re satisfied with the mix and
then a person walks up to FOH and tells
you that they can’t hear their girlfriend,
boyfriend, wife, child, niece, etc.? A
quick twist of an unused channel knob
and a sincere “Is that better?” usually
gets them out of your hair. ■
Senior contributing editor CRAIG
LEERMAN is the owner of Tech Works,
a production company based in Las Vegas.
Even when you don’t have this many
channels and options, a matrix section
can considerably expand flexibil ity.
Slight of Hand
<< Scan here to learn more about the SSM
www.lectrosonics.com or 1-800-821-1121
In Canada, call 877-753-2876
In Europe, call +33 (0) 78558-3735Made in the USA by a Bunch of Fanatics.
It’s not magic... it’s Lectrosonics.
Introducing the SSM micro bodypack transmitter.
Lighter and smaller than any other full-featured transmitter
Remote setting capable with RM or smartphone app
Superb audio quality with Digital Hybrid Wireless®
Lemo 3 standard microphone connector
25 and 50 mW RF power settings
75 Mhz (3-block) tuning range
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 43/68
Shop fullcompass.comCall 800-356 -5844
Pro Audio • Video • Lighting • Musical Instruments
Amplified Savings on Popular BrandsMic Month
Condenser Vocal InstrumenT
...And Many More
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 44/68
42 Live Sound International September 2015 www.ProSoundWeb.com
I’VE SPOKEN WITH DOZENS of
live sound techs and engineers over the
years who have expressed (often longingly)
their wish for a way to reliably distribute
full-bandwidth audio signal wirelessly to
loudspeakers in remote locations, such as
delay towers that extend coverage at largerevents. The decades-long practice of run-
ning cable for this application has been,
and remains, somewhat expensive as well
as a hassle, i.e., preventing cable damage
or accidental unplugging with thousands
of people tromping around.
Attempts to utilize conventional enter-
tainment wireless systems have proven to
work marginally well, particularly when
the equipment is of premium quality,
but they’re not designed for this purpose,limited in both overall capability and by
a point-to-point distribution approach.
And then there’s the ongoing RF situa-
tion, with entertainment wireless losing
the 700 MHz spectrum a few years ago
and further changes still unclear.
All of this is why I was intrigued to
come across AiRocks Pro, offered by
as well as serving in various management
positions. For example, as CEO of RF
Solutions, an Atlanta-based startup, thecompany developed highly efficient 2.4
GHz and 5 GHz semiconductor power
amplifiers for the early WiFi market. He’s
now bringing that hard-earned expertise
to the pro audio market via AirNetix.
Hooper saw a traditional wireless audio
equipment landscape primarily made up
of systems with a single transmitter and
a receiver sending audio from point A to
point B. And while some newer wireless
audio systems have the ability to sendsignal from a single transmitter to mul-
tiple receivers. (“point-to-multipoint”),
because the FCC restricts the amount of
power that each transmitter can radiate,
the effective range is limited. Finally, there
weren’t any devices with the ability to be
configured as a transmitter and a receiver
simultaneously, again limiting range.
REPEAT THAT PLEASE
Hooper’s response with AiRocks Pro is anetwork system approach consisting of a
Atlanta-based AirNetix, while attending
the InfoComm 2015 show in Orlando.
AiRocks Pro is a multi-hop repeater sys-
tem designed to transmit wireless audio
to remote powered loudspeakers and
amplifier racks, operating in the license-
free 900 MHz band that penetrates walls,trees, people and other obstructions that
can limit higher frequency devices that
work at 2.4 GHz or 5 GHz.
As a result, it’s well-suited for delay
stack applications at concerts, festivals,
golf tournaments, parades, air shows,
auto races, and other events requiring
full-bandwidth, pro-quality audio signal
distribution over a large area. An AiRocks
Pro system also provides 158 mW of
effective transmitting power for range ofmore than 1,000 feet, as well as built-in
variable delay (up to 500 ms), XLR line-
level audio input and output, and network
control. The system provides 2-channel
stereo operation as well as single-channel
mono mode, and the hardware is housed
in weather-resistant aluminum enclosures
designed for outdoor use.
IDENTIFYING A NEED
Founded by Mike Hooper, AirNetixis focused on designing and develop-
ing digital wireless products for the pro
audio market. A self-described “long-
time serial entrepreneur,” Hooper has
more than 40 years of experience with
satellite and optical communications,
data networking, wireless semicon-
ductor development, WiMAX, WiFi,
power amplifiers and front-end modules
(FEMs) for mobile devices.
Over that time, he’s worn a lot of hats,developing both hardware and software
AiRocks Pro deployed by West Moon
Studios for the Arts Alive Festival in
Mission Viejo.
Eliminating the cable in feeding delays with the
AiRocks Pro system. by Keith Clark
WIRELESS DISTRIBUTION
LEADINGEDGE
��
AirNetix founder Mike Hooper with an AiRocks Pro ARX-900 unit.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 45/68
w w w . r i e d e l . n e t
I N T E L L I G E N T
N E T W O R K
S F O R E V
E N T S
I N
A N Y F O R M A T
M E D I O R N
E T
R e a l - T i m e M e d i a N e t w o r k
A R T I S T
D i g i t a l M
a t r i x I n t e r c o m
C C T V
U n i fi e d
s e c u r i t y s o l u t i o n
S e e
u s a t
I B C S
t a n d
1 0 . A
3 1
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 46/68
44 Live Sound International September 2015 www.ProSoundWeb.com
:: Leading Edge ::
single master unit and one or more relay
units, each able to be configured to oper-
ate either as the master or a relay. Two
types of units are available: the ARX-900
for mobile applications and the ARX-910 for installed applications. The only
differences between the two are that the
ARX-910 doesn’t include front panel
controls (saving cost) and is fully weather
proofed for long-term outdoor use.
Within an AiRocks Pro network,
each unit receives an audio transmis-
sion from a single “upstream” unit and
then re-transmits that same signal to
one or more “downstream” units. Each
unit creates its own point-to-multipointsub-network. The input to each sub-
network is the signal received by the
single uplink AiRocks Pro unit.
As a result, a network is a group of
one or more sub networks, all of which
emanate from a single network master.
Networks can be as simple as one master
unit and one relay unit in a point-to-point
configuration or as complex as 100 units
with multiple branches and sub-networks.
If there’s a failure of one of theupstream units, the downstream units
automatically scan for other AiRocks Pro
transmission within range. If an accept-
able signal is found, it then becomes the
input signal for that sub-network or any
newly created sub-networks. This auto-
matic switchover is accomplished with-
out the need for manual intervention.
TOOLBOX OF FUNCTIONS
It’s all set up and controlled viathe Network Management Sys-
tem (NMS), built into every
unit and providing a toolbox of
real-time monitor and control
functions. A remote spectrum
analyzer function scans the
local RF environment of any
remote unit and plots the
results of the scan on a spec-
trum analyzer graph in the
NMS relay monitor window,allowing the operator to keep
track of any potential interference at any
remote relay location.
Other critical functions that can be
monitored and controlled include receive
signal strength indicator (RSSI or receivesignal level), packet error rate (PER),
remote spectrum analysis (RSA), audio
level, and delay. Another feature called
Automatic Link Optimization (ALO)
continuously monitors the quality of the
link between units and automatically
selects a new transmission channel if the
interference level is too high.
Even if interference appears after the
initial installation has taken place, the
links continue to self-optimize to avoidany new or transient local interference.
The ALO scan and optimization takes
2 seconds, during which the audio out-
put from the unit is muted.
As noted, AiRocks Pro transmits at
158 mW of output power, which can
cover distances of more than 1,000 feet
with standard antennas. Utilizing an
optional directional 6 dBi Yagi antenna
boosts effective output power to 398
mW, and for extreme cases, the AiRocksPro has been authorized to use a 14 dBi
Yagi directional antenna, which means an
effective transmit power of 2500 mW.
IN THE REAL WORLD
Finally, AiRocks Pro operates in the unli-
censed, uncrowded 900 MHz radio band,
offering the flexibility to utilize the system
virtually anywhere in the U.S.
and Canada without dealing
with licensing while also less-ening the need for frequency
coordination and eliminating
intermodulation issues. It was
subject to a lengthy beta-
test process that concluded
this past April, with sev-
eral noted sound compa-
nies in the U.S. providing
Hooper with a range of
useful input that was incor-
porated into the system.One of those beta-
testers, Alex Moran, owner of Spider
Ranch Productions (South San Fran-cisco), notes, “We’ve used an AiRocks
Pro system in several of our more chal-
lenging venues and it performed flaw-
lessly. The transmit range is well beyond
any other product that we have tested,
and the rugged aluminum enclosure
makes it perfect for the hard knocks on
the road. And since any radio can be
configured as a transmitter or receiver,
we are able to quickly reconfigure our
RF link to and from the stage during alive event.”
Another user, Danny Gray of West
Moon Studios (Capistrano Beach, CA),
deployed AiRocks Pro for the Arts
Alive Festival in Mission Viejo this past
May. “I put two of the units 15 feet into
the air and the third on a regular tripod
speaker stand,” he explains. “Everything
worked as planned. The master node
was placed at the front of house mixing
position, with the others at 240 feet and460 feet from the stage.
“The software seems pretty com-
plete, although I will need to spend a
little more time with it. I especially like
the 500 ms delay, which worked really
wel l,” he concludes. “My client was
happy, and even happier that they didn’t
have to bury 460 feet of cable.” ■
KEITH CLARK is editor in chief
of Live Sound International andProSoundWeb.
A simplified overview of the AiRocks
Pro repeater process.
Single Unit – A closerlook at an ARX-900.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 47/68
Super High Output from Dual 12” Lows, four x 6.5” Mids, and 2 x 3” HF Compression Drivers delivering an astounding 140 dB SPL (single unit). Powerand far-fi eld performance from our Patented V-Power Concept (US D500,306 S) and D.P.R.W.G. Wave Guide (EP1532839) . Extremely compact package:H 14.3” (363 mm) - W 44.3” (1126 mm) - D 25.8” (655 mm). Very low weight: 160 lb (72.5 kg). E-Z RIG - Lightweight Ergal Aluminum Exoskeletal RiggingSystem fi rst used on the full sized GTO: adds the strength of steel, but keeps weight to a minimum. Same foot print as the full sized GTO - makes allhardware and accessories fully compatible. Single point fl y frame with one Ton motor rigs up to 12 GTO C-12’s for weight restricted venues.
GTO GTO DF GTO LOW GTO SUB
OUTLINE. THE PASSIONATE PURSUIT OF PERFECTING PRO AUDIO SINCE 1973
OUTLINE ITALY SRL - Tel.: +39 030 35.81.341 - mail to: [email protected]
OUTLINE NORTH AMERICA LLC - Tel.: 516 249 0013 - mail to: [email protected]
THE GTO LINE ARRAY FAMILY
www.outline.it
7
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 48/68
46 Live Sound International September 2015 www.ProSoundWeb.com
“WILL IT PLAY IN PEORIA? ”
asks the old adage. It certainly will at
the theater within the Peoria Civic Cen-
ter, thanks to a significant audio system
upgrade at the central Illinois city’s
leading venue for concerts, theatrical
productions, and other live events. Theupgrade also allows the theater to work
more cohesively with sister venues that
are also part of the civic center complex,
including Carver Arena and a conven-
tion center.
The sound design and installation
was provided by Peoria-based Advanced
Audio and Lighting for the 2,244-seat
venue, including its 16 skyboxes, balco-
nies, and underbalconies as well as ancil-
lary areas like dressing rooms and lobbyareas. A primary goal of the project was
MEETING UNIQUE NEEDS
The Biamp Tesira digital processing
platform implemented on the project
plays a key role in delivering maximumflexibility, with audio signal and control
transport via an AVB (Audio Video
Bridging) network design. Along with
a newly designed company switch and
proper electrical distribution, the system
exhibits an extremely low noise floor.
The AVB network protocol provides
imperceptible latency, excellent
clocking, and freedom from
interconnected ground loops. A
21-inch touch panel and mul-tiple LAN connections offer
convenient operator access to system
parameters along with a full-featured
virtual mixer for events with less input
requirements.
Keeling notes that the sonic quality
of the Tesira platform is also quite good,
commensurate with other premium dig-
ital processing options for sound rein-
forcement. “A lot of designers have needs
that are unique to their show,” he notes.“It’s not a generic thing. For example,
they may want to matrix sound effects
to specific locations or incorporate aux
fed subwoofers. Again, we can do that.
“The design of the system also allows
shows to come in with their own gear as
their needs require, and they can either
route or tie-in to our system,” he contin-
ues. “Flexibility is critical. Matrix routing.
Preset configurations for instant recall by
house staff. You name it. That’s all beenestablished within Tesira.” The platform
also handles signal delivery and manage-
ment to the subsidiary spaces noted ear-
lier (lobbies, dressing rooms, etc.).
PLENTY OF OPTIONS
The flexibility mantra also applies to
the main loudspeaker systems, joined by
quality full-range sound reinforcement.
Two loudspeaker sets can be utilized to
deliver coverage to the expansive mainfloor seating area as well as two balco-
bringing the theater, which opened in
1982, up to contemporary audio produc-
tion standards, and in fact that’s what
has been achieved – and then some.
Prior to the upgrade, rental systems
frequently had to be brought in, espe-
cially for concerts. Further, there was thedesire that the system offer a variety of
different configurations to better meet
the specific needs of each type of per-
formance visiting the venue.
“For example, when an off-Broad-
way engineer comes in and has specific
requirements and says, ‘shut certain zones
off,’ we can do it. Or he may want a spe-
cific EQ response from some compo-
nents, and we can do that,” explains Trent
Keeling, vice president of Advanced Audio and Lighting, who co-owns the
company with partner Graeme Brown.
Keeling also credits the contribu-
tions of the company’s team as being
crucial to what is ultimately a highly
successful outcome, including systems
engineers Nick Steinseifer and Don
Delong as well as installation foreman
Ryan Swearingian. “Other support staff
is too numerous for mention here – suf-
fice to say I couldn’t be more proud ofthis incredible team,” he says.
A significant system
upgrade for a major
Midwest venue.
by Live Sound Staff
PLAYING
IN PEORIA
��
PROJECTMEMO
A perspective of the the-
ater at the Peoria Civic
Center, including a view
of some of the venue’snew loudspeakers.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 49/68
www.ProSoundWeb.com September 2015 Live Sound International 47
nies on the rear wall and the rows of
skyboxes along each side. Left and right
line arrays flank the stage proscenium,
where they provide dynamic supportprimarily for concerts, while a distrib-
uted system anchored by a loudspeaker
cluster flown at center and joined by
numerous compact loudspeakers on
time delay can support other types of
performances or presentations.
The line arrays are each comprised of
nine RCF TTL55-A three-way active
modules, and beneath each are three
RCF TTL36-AS dual 18-inch active
subwoofers in cardioid configuration. According to Keeling, the RCF TTL
line arrays and subs were selected for
this project because their active designs
reduces amplification costs, they incor-
porate quality transducers that are
known in touring circles, and they offer
real value in performance versus cost.
“Competitively, when you look at
all of the loudspeakers available today,
RCF is right there with any of the big-
name players,” he says. “This was a year-long vetting and design process for our
team, working very closely with Eric
Yarbrough, the technical director of the
civic center. Eric is a seasoned profes-
sional and was able to provide us with
the huge variance of production scenar-
ios that were critical to the project’s suc-
cess. With the budget restraints that we
had, you don’t get any better than this.”
He adds, “The system can easily attain
115 dB continuous at the back wall. So it
can handle harder acts while also being
received very well by more acoustic-based
artists. We’ve had consistent compliments
from a wide range of touring engineers
since the arrays were implemented.”
Meanwhile, the center cluster is com-
prised of three Danley Sound Labs passive
loudspeakers – a single SH-50i for floor
seating joined by two SM-60s that pro- vide down fill coverage. They’re housed in
a custom Polar Focus flying kit that allows
them to be easily removed when sightlines
for theatrical productions are impacted.
Further, the cluster itself can also
be used solely to provide coverage at
smaller events, with or without the four
RCF TT52-A two-way (dual 5-inch)
loudspeakers along the stage for front
fill. Direct coverage to the skyboxes is
attained with RCF C3108 compact pas-sive loudspeakers, while six more of these
loudspeakers bolster coverage to the
underbalony regions. Two RCF P5228
wide-coverage compact loudspeakers
reinforce the upper balcony seats.
ANOTHER LEVEL
All passive loudspeakers are driven
by Powersoft Ottocanali 8-channel
amplifiers that are specifically designed
for mid- and large-scale multi-zoneapplications. Higher power Ottocanali
12K4 amps drive the larger loudspeak-
ers while lower power Ottocanali 4K4
amps handle the smaller ones.
Two Avid VENUE Profile digital
consoles are on hand for use at front of
house and monitors, accompanied by
their respective stage boxes and digi-
tal snake system. The monitor console
feeds up to eight RCF TT25-SMAactive 12-inch monitors that can be
placed about the stage, as well as three
larger (dual-12-inch) TT45-SMA
active wedges and an RCF SUB8004-
AS 18-inch active sub for drummers.
All of this, combined with a versatile
loudspeaker control approach, has helped
take the venue to another level when it
comes to being seen as a top-tier facility
that appeals to a wider range of functions.
“Our design takes into account eventproduction costs and enhances the revenue
stream to the venue,” Keeling concludes.
“Management can be very competitive
when vying for events by noting the true
turnkey nature of the facilities. Potential
clients can walk into the venue and notice
right away how flexible it all is, as well as
how they won’t need to spend extra money
bringing in additional gear or labor. Plus
it sounds great. The venue has noticed a
huge uptick in outside promoters who want to use this premium venue.” ■
A view from the stage of much of thecoverage area presented by the theater.
Members of the Advanced Audio and Lighting team with theater technical directorEric Yarbrough. Left to right: Ryan Swearingian, Mike Buck, JJ Henkins, Trent Keeling,
Don Delong, Yarbrough, and Nick Steinseifer.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 50/68
48 Live Sound International September 2015 www.ProSoundWeb.com
ADVANCING
PERFORMANCE
�� MEETING THE CHALLENGE AT RED ROCKS
The Avett Brothers, currently touring the U.S. with Martin Audio
MLA supplied by Special Event Services (Winston-Salem, NC
and Nashville), recently played three sold-out dates at Red Rocks
Amphitheatre in Colorado. Known for the short distance from
FOH to the PA and a limited trim height to the top of the system,
Red Rocks also has an audience area that extends out roughly 300
feet from the front of the stage with a 105-foot vertical climb to
the top seats, about 60 feet above the roof of the venue.
SES deployed 16 MLA and two MLD (Downfill) enclo-
sures, with six ground-stacked MLX subs per side, to reproducethe band’s eclectic mix of bluegrass, country, punk, pop melodies,
folk, rock, honky-tonk and ragtime. “You’re so close to the PA at
Red Rocks that sometimes when you make changes to correct
the sound at FOH, where there is usually a lot of high end and
low mids coming off the system, it can have an adverse effect
at the top of the hill,” explains SES systems engineer Andrew
Steelman. “Also, you’re at much higher altitudes where there’s
less dense air for sound to travel through, and you’re very suscep-
tible to winds blowing through the audio at the top of the venue.
“With MLA, we were able to walk the show at the highest
seats and see that the people were enjoying the show and they were as engaged as those down in front, even in the quieter
moments, which really made me satisfied with the system’s
performance. MLA covered every seat in the venue and helped
us accomplish what we needed to in that environment, which
is to have an Avett Brothers show translate to every seat in thehouse. I’d have to say it was one of the best-sounding shows
I’ve heard at Red Rocks.”
KEEPING IT EFFICIENT
FOR FITZ AND THE TANTRUMS
Front of house engineer Aaron Glas is utilizing a Soundcraft Vi3000
digital console and Realtime Rack as centerpieces of his work on the
current tour by Fitz and The Tantrums. Led by vocalists Michael
Fitzpatrick and Noelle Scaggs, the rock/soul/R&B group is noted
for its unique sound and for high-energy live performances.
“The Vi3000 shares a Compact Stagebox with the Vi1 atmonitors, so it’s really efficient. We don’t have the need for an
analog split or analog snake, and it’s worked very well for us,” Glas
explains. “The band can change vibes quickly; they’ll move from
an old Motown sound to an electronic synth-y feel, and I need
to be able to switch instantaneously to keep the sound consistent
for the audience. The snapshots on the console help me with that.
I also make changes on the fly right along with the set list, and
even during different verses and choruses within the same song.”
Another challenge is the differences in vocal range and stylebetween the band’s two lead singers. “I have to keep up with
their dynamic ranges and movements of Fitz and Noelle on
stage,” Glas says. “That’s where a cool plug-in chain comes in
handy. Before using the Realtime Rack, I had an analog plug-
in chain with a series of compressors and EQs. Now I can
achieve the same result or better with the plug-ins.”
LARGE-SCALE COVERAGE
(AND THEN SOME) IN CENTRAL PARK
NY CityFest, a region-wide Christian initiative, recently teamed
up with Luis Palau and dozens of other partner evangelists tocelebrate its achievements with a free concert and gospel sermons
Sonic excellence for a
range of live productions.
by Live Sound Staff
WORLDSTAGE
A Martin Audio MLA array soaring at Red Rocks Amphitheatre
for the Avett Brothers.
Aaron Glas at the Soundcraft Vi3000 digital console for Fitz
and The Tantrums.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 51/68
www.ProSoundWeb.com September 2015 Live Sound International 49
K-array Firenze Series arrays on the main stage in Central Park.
Keech Rainwater of Lonestar with his new Mackie DL1608
digital mixer.
at Central Park in Manhattan. Attendance was limited to “only”60,000 people, plus another 20,000 encircling the perimeter.
Production company L&M Sound & Light (Staten Island)
provided a sound reinforcement system headed up by K-array
Firenze Series loudspeakers to deliver coverage to the 55-acre-
plus site. Specifically, the system incorporated a dozen KH8 line
array elements paired with eight KS8 subwoofers per side. Two
KH3 loudspeakers were combined with two KS5 subwoofers
for stage side fills to the left and the right of the performers.
At delay towers one and two, the longest array of KH7
loudspeakers ever assembled was flown, with five of the line
array elements connected end-to-end and hung vertically. They were joined by three KS5 subwoofers each that withstood a
couple hours of heavy rain followed by extended periods of
summer heat. The final set of towers consisted of four KH4
loudspeakers with eight KS4 subwoofers each.
“I was skeptical since I’d never seen a system setup like that
before and, on such a large platform with a global audience, we
had little room for error,” states Ryan Lampa, mix engineer for
Toby Mac. “But I was extremely pleased with the power, cov-
erage and accuracy right out of the box. I was inspired by the
clarity of the PA and found myself making the tiniest changes
to the mix and enjoying hearing those tiny changes.”
PRECISE OPTIMIZATION
OF PERSONAL MONITORS
After more than 20 years, nine Number 1 hits, nine more Top 10
hits, three platinum albums, and countless tours, country band
Lonestar is still thriving. On the band’s 2015 tour, co-founder
Keech Rainwater decided to employ a Mackie DL1608 digital
mixer with iPad control to tailor his own monitor mixes.
“With all of the DSP in the DL1608, I can EQ my kit
more precisely, so it’s snappier and brighter and cuts through
the acoustic sound of the drums without affecting anyone else’smix,” he notes. “I can add vintage EQs, I can pan each drum
the way I want, use gates, and have some compression so I can
hear the dynamics loud and clear. I can also add a bit of reverb,
which I could never do before.”
Rainwater still gets a monitor mix of vocals, guitars, and
so on, like the rest of the band. “I set the band mix in sound
check and rarely touch it during the show,” he says. He routes
his stereo band monitor mix to the DL1608’s channels 15 and
16, leaving the rest of the channel faders available to control his
personal drum mix and a click track. We use a DAW to sup-
ply a click track. I take a feed of the click track straight to my
DL1608, which lets me control it the way I want to,” he says. The mixer also fits in a suitcase or small Pelican case for
easy transport, while the iPad saves every change he makes in
a snapshot, so he saves multiple levels – gates, EQ settings,
reverb, compression, and so on.
DELIVERING DYNAMIC RANGE IN SOUTH KOREA
This year’s Ultra Music Festival (UMF) Korea at Jamsil Sup-
plementary Stadium in Seoul, South Korea drew more than
10,000 in featuring artists such as Snoop Dogg, Bright Lings,
Lil Jon and Galantis. Alpha Media Group (AMG) provided
Adamson Systems E-Series loudspeakers that were deployed
The scene at UMF Korea with coverage by Adamson SystemsE-Series.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 52/68
50 Live Sound International September 2015 www.ProSoundWeb.com
:: World Stage ::
at the main stage, with Sun Kim, technical support manager
for Sound Solutions (Adamson’s Korea distributor) assisting
with system design utilizing Adamson Blueprint AV software.
The system was headed by left-right arrays made up of twelve
E15 and two E12 enclosures. Seven E218 subwoofers werestacked on the stage under each line array, with four more E218
ground stacked in front of the stage for further bass support. Six
S10 enclosures were placed along the stage lip for front fill. “It
was a very stable system that handled the dynamic range of EDM
without missing a beat,” states front of house engineer Taejong
Park. “The sound was very clean, especially the low end.”
DJ monitoring was handled by six Adamson S10 enclosures
– three per side – stacked on a single subwoofer. The PA was
driven by Lab.gruppen PLM20kQ and PLM12k44 amplifiers
with two Lake LM44 units for processing.
“We were very pleased with the Adamson system at theshow,” adds Kim. “The field was transformed into a dance club
and the music was exceptional – Adamson is the top name in
the business and they lived up to their reputation.”
SONIC QUALITY & COMFORT FOR LIVE COUNTRY
The McCullough Girls, a country group delivering a blend of
bluegrass and folk, are utilizing Countryman ISOMAX Headset
microphones and Type 10 DIs on tour. The group’s bass player,
Dave Jeffrey, has worked with the Type 10 for several years and
recently added ISOMAX Headsets to the equipment list.
“We wanted to improve upon our wireless microphone set-up,so I began exploring available options. I was well aware of Coun-
tryman’s reputation for its microphones, and since my results with
the Type 10 DI were so positive, this was the first option.
“Based on a recommendation from Dolly Parton, I was the
first in the band to try the ISOMAX Headset, and, again, the
results were excellent,” he continues. “The ISOMAX is a great
sounding microphone. Mine is a tan-colored, hypercardioid
model. It delivers a really strong signal, is very musical, clean,
and full sounding. And it has a secure, comfortable fit, so it’s
not the least bit distracting during performances.”
Since then, vocalists Deborah and Callie McCullough have
also switched to ISOMAX. “We’re using both headsets with
Shure ULX-D wireless microphone systems, and together, theymake an excellent system.”
COVERAGE FOR A MILLION IN ROME
Earlier this summer, San Giovanni Square in Rome hosted a live
event for a reported crowd of one million people, with Cipiesse
(Centro di Programmazione Spettacoli) of Rezzato (Brescia)
delivering coverage with loudspeakers from Outline. The system
design, by Giancarlo Paladini and front of house engineer Raf-faella Gatti, was based on measurements carried out three years
before with Outline on the occasion of a huge May Day concert
organized by the country’s major trade unions.
The designers opted for two main stage-side clusters, each
with twelve Butterfly elements, plus two small arrays (each
with four Eidos 265 enclosures) on either side for front fill.
Two delay towers were also deployed, each with two hangs:
two with 12 Butterfly enclosures and the other two with 12
Mantas elements, approximately 70 yards from the main rig.
Apart from guitar groups accompanying choirs and singers,
along with video programming, the majority of the reinforce-ment was for presenters (journalists, legal experts, psycholo-
gists, and religious leaders). As a result, four Outline Subtech
218 subs at the stage and two at each delay tower were more
than sufficient for the low end.
“We used Outline’s Open Array software simulations,
which are always very realistic, so as usual on events of this
scale, we did a considerable amount of work with the soft-
ware, as we knew the rig would respond accordingly,” Gatti
explains, with Paladini adding, “We saw that the simulations
corresponded with reality and, as far as system calibration was
concerned, it was mainly a case of ‘plug and play’ thanks toOutline’s default presets.” n
Callie McCullough wearing her Countryman ISOMAX Headsetmicrophone.
Outline arrays flying at San Giovanni Square in Rome.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 53/68
www.eaw.com
Whether in hotel ballrooms, tents, outdoor stages, clubs, festivals or houses of worship – your clientswill notice how the pristine fidelity, coverage consistency and output capability of Redline™ enableseveryone in their audience to experience a connection.
They probably won’t notice the subtle hyperblack logos, the absence of fan noise, the hidden amplification on the cardioidsubs or the back panel LEDs that have been muted with the push of a button. But we’re confident you’ll agree that’s okay.
With Redline in your arsenal, the reviews of your company will be glowing. The drapes won’t be.
Redline. Engineered by professionals, for professionals.
Find out more and enquire about a demo at EAW.com.
Shown:RL12 in monitor orientation,
RL15 full-range over twoRL18S subwoofers in cardioid configuration
Some things your clients should notice.Others, they shouldn’t.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 54/68
THE SHURE QLX-D is a digital
wireless microphone system providing
24-bit digital audio, networked control,
compatibility with the company’s intel-
ligent rechargeable battery technology,
and AES-256 encryption.
The all-metal receiver is a half-rack
size and weighs just 1.7 pounds without
antennas. It’s powered via an external12-volt wall-mount power supply. The
front of the receiver offers a large backlit
color LCD screen, menu selection but-
tons, and power switch.
On the rear is a pair of BNC antenna
jacks, XLR and 1/4-inch audio output
jacks, mic/line level switch, network
connector, and power supply jack. Auto-
matic channel scan function is designed
to quickly find clean frequencies, and the
networked channel scan feature configuresopen frequencies for connected receivers.
Handheld transmitters are available
with a variety of replaceable elements,
including SM58, BETA 58A, BETA
87A, BETA 87C, SM86, SM87, KSM9
and KSM9HS. Body pack transmit-
ters can be accompanied by WL93, or
WL183/WL184/WL185 MicroFlex
lavalier mics, as well as the SM35 headset
mic. A WA305 instrument cable is also
offered, and there’s the option to orderthe system with just this cable.
Both handheld and beltpack trans-
mitters have rugged metal construction
and backlit LCDs. Transmitters provide
more than 120 dB of dynamic range
that eliminates transmitter gain adjust-
ments, and they also offer adjustable
transmit power settings. Pairing of
transmitters and receivers can be
paired over IR scan and sync.
The tuning bandwidth is 64 MHz,
with 67 preset compatible channels.
There are also 17 compatible systems
per 6 MHz channel and 22 systems per
8 MHz channel available to be used.
The four available bands include G50
(470.12-533.92 MHz), J50 (572.17-
635.9 MHz), L50 (632.17-695.9MHz), and H50 (534.0-597.92 MHz).
QLX-D works with networking
tools, including Shure Wireless Work-
bench 6 control software, third-party
control systems (AMX/Crestron), and
iOS devices for control and monitoring
with the ShurePlus Channels mobile
app. The AES-256 encryption comes
standard and can be enabled for secure
wireless transmission.
Transmitters are powered with eitherstandard AA alkaline batteries or Shure
SB900 intelligent lithium-ion recharge-
able power options that can provide up to
10 hours of continuous use. Battery run-
time is displayed in hours and minutes,
with the user selecting the type of
battery being employed – AL for
alkaline, nH for nickel metal hydride
and Li for lithium – to insure the
highest reporting accuracy.
TRYING IT OUT
I received a QLX-D24/
SM58 system for this
eva lua t ion , which
includes a hand-
held transmitter with an SM58 element.
Out of the box the first thing I noticed
was how nice the handheld transmitter
feels. It’s made of machined aluminum
and is very rugged. On the side of the
body is the LCD display, as well as a clear
IR window for syncing and a paddle-type
on/off switch.
While the system arr ived alreadysynced, I wanted to try out the channel
scanning and syncing features for myself.
Scanning the airwaves for a clean channel
is simply a matter of pressing the menu
button and then entering the scan mode.
The scan icon will flash when scanning,
and when complete the selected group
and channel, along with the frequency,
appear on the display.
Syncing a transmitter is accomplished
by pressing the sync button on the receiver. With the transmitter powered on, the user
aligns the IR windows of both units about
six inches away from each other. The red
sync light on the receiver flashes when in
sync mode and a blue RF light and the
word “GOOD” appear on the screen
when the transmitter is programmed.
Transmitters can also be programmed
manually with menu buttons that are
located under the battery covers.
With the system up and running Itested it in the shop. It sounded great,
and transmission was very solid – I
could walk around the entire shop, even
standing behind rows of metal pallet
shelving, without any dropouts or other
glitches. Satisfied that all was work-
ing correctly, it was time to deploy the
QLX-D at a few shows.
VARIETY OF EVENTS
The first gig was a block party with aDJ set up in the middle of a street here
Checking out a digital wireless microphone system.by Craig Leerman
Shure QLX-D
Shure QLX-D digital wireless sys-
tems are available with handheld
and body pack transmitter options.
52 Live Sound International September 2015 www.ProSoundWeb.com
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 55/68
www.ProSoundWeb.com September 2015 Live Sound International 53
A closer look at
both transmitters,
including their large,
clear displays.
in my home base of Las Vegas. With
the receiver located at the stage and the
transmitter set to high power (10 mW),
I could easily walk the entire length of
the street to where the food trucks were
parked, about 200 feet from the stage,
with zero dropouts or noise issues.Pretty good range to say the least! Dur-
ing the event, the DJ walked around the
crowd several times with the mic, and
again, there were no issues.
Next up was a jazz band with a female
vocalist at a Vegas casino ballroom. Nor-
mally I scan the airwaves for clear fre-
quencies with my RF Explorer
spectrum analyzer, but with
the built-in scanning fea-
ture of the QLX-D, myanalyzer stayed in its case.
The unit quickly found a
clear frequency and sync-
ing the transmitter
was a breeze.
Th e fema le
vocalist liked to
sing with the
mic at about
chest level, with
the SM58 cardi-oid element not
the best choice
for this style. So
I swapped it with an SM87A supercar-
dioid head that I have on another wire-
less system, and it proved to be the exact
right tool for the job.
In the final application, we deployed
the system for a variety show at a ball-
room right near the Vegas strip. The
show included a comedian host, acous-tic and electric performers, comedians,
and singers with tracks. We used the
QLX-D as the main mic for the host,
comedians and singers. The host liked
to switch the mic off when he wasn’t
using it. Normally we tape transmit-
ter switches to stay in the “on” position
so the talent can’t mess with them, but
because the QLX-D switch is silent in
the PA, we let him turn the mic on and
off as he pleased. Again, scanning theairwaves and syncing the transmitter was
easy, and there were no RF issues. A pair
of AA alkaline batteries ran for more
then eight hours, and there was still one
bar showing on the meter at the end of
the show.
The QLX-D is an impressive system.
Both receiver and transmitter are rug-ged and should have no trouble surviv-
ing anything a typical gig or tour throws
at them. What impresses me most is the
great audio quality and glitch-free oper-
ation, even at long distances, combined
with the convenient, effective automatic
channel selection and system sync. If
you’re in the market for a new wireless
system, put it at the top of your list.
U.S. MAP: Starts at $973, varying by
system components.■
Senior contributing editor CRAIG
LEERMAN is the owner of Tech Works,
a production company based in Las Vegas.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 56/68
54 Live Sound International September 2015 www.ProSoundWeb.com
REALW RLDGEAR
��
Adamson Systems E218 �� www.adamsonsystems.com
Type/Format: Bandpass; ground-stack or fly with integrated hardware
Components: 2 x 18-inch Kevlar cones with neodymium magnets
Frequency Response: 30 – 110 Hz (+/-3 dB)
Sensitivity (1 W/1 m): N/A
Max SPL: 142 dB
Nominal Impedance: 8 ohms
Power: 800 watts AES per driver
Dimensions (h x w x d): 23.5 x
43.7 x 34.2 inches
Weight: 190 pounds
VISCERAL, DEEP, PERCUSSIVE, tight, punchy – just
some of many words used to describe bass response. A promi-
nent low end forms the foundation for many styles of music
and helps get the audience moving.
Subs are specialized loudspeaker cabinets, typically operating
somewhere inside the range between 20 Hz and 150 Hz, and they
usually cross over into the full-range mains around 100 Hz. Espe-
cially toward the bottom of the range, these LF sounds are felt in
the body as much as they’re heard as a distinct pitch, with the area
between 20 to 40 Hz often called sub-bass. Many popular instru-ments center around bass frequencies, with the low E on a bass gui-
tar or upright having a fundamental of 41 Hz, the lower notes of a
synth, piano, or five-string bass going down to 31 Hz or below, and
the thump of a kick drum focusing a lot of energy around 60 Hz.
To meet the requirements of reproducing LF at higher
sound pressure levels, most of the enclosures are physically
large and densely constructed, often housing a pair of 15-inch
or 18-inch (and sometimes bigger) cone drivers. Yet even for
their size and weight, they’re dwarfed by the lengths of the
sound waves they must reproduce. A 40 Hz tone, for example,
measures over 28 feet to complete a single cycle. Given theratio of wavelength to cabinet size, the resulting audio output
tends to propagate omnidirectionally, though technologies are
available to control (at least somewhat) directionality.
Subs are designed using several basic principles. The most
common design utilizes one or more direct-radiating cone
drivers in a tuned, ported “bass reflex” enclosure. Also widely
used, a folded horn design places a cone driver within the
interior of the enclosure, and it feeds a baffled “horn” pathway
that exits the front. The tapped horn is a variant that modifies
the location of the driver within the horn.
Bandpass designs resemble enclosures within an enclosure, where cone driver(s) in sealed or vented internal cabinets fire
into a second tuned chamber before the sound exits, reducing
upper harmonics while presenting a controlled LF bandwidth.
Designers will sometimes use more than one of these principles
to create hybrid subwoofers, such as a blended direct-radiating
and bandpass cabinet. Cardioid designs present more acoustic
energy toward the audience area while reducing output toward
the rear. They typically have one or more forward-facing drivers,
combined with a rear-firing driver whose output is modified in
time via physical positioning and delay, so that the combined
sound waves tend to attenuate or cancel at the sides and back.Multiple enclosures can also be combined in various ways
to create directivity, usually with some of the cabinets turned to
fire toward the rear. Alternately, individual cabinets may have
their polarity reversed (some models provide switches or other
internal settings for this purpose), or their output is electroni-
cally delayed to create the desired pattern of summation and
cancellation away from the stage and toward the listeners. The
multiple subs within these arrays also couple to effectively cre-
ate a much larger source relative to the longer LF soundwaves.
Other aspects to consider include the placement of subs
relative to the mains, output level, LF extension to meet therequirements of the music, the ability to accurately reproduce
the audio sources they’re reinforcing (transient and frequency
response), and minimizing harmonic interference between the
output of the subs and the low-mids of the mains.
Ultimately, the subs chosen and how they’re used is dictated
by the needs of the music and what the listeners expect. At
Electro-Voice, I was part of a group proposing tunes to highlight
the low end of a particular sub. I preferred an acoustic instru-
mental with an upright bass solo ending on a powerful, sustained
low E that could be felt as well as heard. A co-worker chose a
dance tune with a kick drum punch that to my ears soundedlike beating on a cardboard box. In the end we used both, since
one highlighted the musicality and the other imparted impact.
The following overview includes more than two dozen
models in a variety of formats. In addition, ProSoundWeb
offers several informative articles on subwoofers that lend fur-
ther understanding. ■
GARY PARKS is a pro audio writer who has worked in
the industry for more than 25 years, holding marketing and
management positions with several leading manufacturers.
Subwoofer principles and a look at recent models. by Gary Parks
How Low Can They Go?
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 57/68
www.ProSoundWeb.com September 2015 Live Sound International 55
VUE Audiotechnik hs-20
www.vueaudio.com
The hs-20 is an ultra-compact yet highly powerful, ver-
satile subwoofer. A unique hybrid design combines
both bandpass and vented alignments into a single,miniscule footprint. This is furthered with precision-
engineered transducers and sophisticated electronics
to deliver much higher output throughout its operating
bandwidth from a remarkably compact enclosure.
The onboard h-Class systems engine supplies 500 watts of pure sine wave power
(and 800 watts of peak power) to each 10-inch woofer with built-in DSP and net-
working with Dante. Both long-excursion woofers are equipped with dual layer,
inside/outside-wound 64 mm voice coils. Mac and Windows compatible software
provides access to networks and device-level parameters such as speaker protec-
tion, input/output levels, volume, mute, delay and input sources.
It’s all housed in a rugged enclosure that’s manufactured from premium-gradebirch plywood with extensive internal bracing for resonant-free operation. A highly-
durable, 6-step Dura Coat finish provides road-tested protection, while looking great.
OF NOTE: The hs-20 ships with networking capabilities with Dante already onboard, auto-
matically connecting to virtually any kind of IP configuration for access to network and device-
level parameters through SystemVUE software.
TECHNOLOGY FOCUS: Active Compli-
ance Management (ACM) is a patent-pending hybrid
design that combines the attributes of direct radiat-
ing and bandpass configurations to reduce distortion
and optimize amplitude and phase response.
KEY SPECIFICATIONS
Type: Hybrid (bandpass and vented alignments);
ground-stack
Components: 2 x 10-inch conesFrequency Response: 40 - 160 Hz (+/-3 dB)
Sensitivity (1 W/1m): 94 dB
Max SPL: 135 dB
Power: Self-powered; DSP and networking
Dimensions (h x w x d): 14.2 x 24.2 x 22 inches
Weight: 81 pounds
d&b audiotechnik B4-SUB www.dbaudio.com
Renkus-Heinz VA15Si www.renkus-heinz.com
EAW eaw.com
Type/Format: Direct-radiating bass reflex; cardioid pattern with rear-
firing element; ground-stack Components: 1 x 15-inch cone with neodymium magnet; 1 x rear-firing
12-inch cone in bandpass enclosure
Frequency Response: 40 – 150 Hz (-5 dB)
Sensitivity (1 W/1 m): N/A
Max SPL: 131 dB
Nominal Impedance: 6 ohms
Power: 500 watts RMS with d&b D Series
amplification
Dimensions (h x w x d): 18.7 x 22.8 x 31.6 inches
Weight: 97 pounds
Type/Format: Direct-radiating bass reflex; ground-stack or fly with
integrated hardware
Components: 1 x 15-inch cone with dual suspension
Frequency Response: 40 – 120 Hz (+/- 3dB)
Sensitivity (1 W/1 m): 1.0 volt for RPO
Max SPL: 128 dB
Nominal Impedance: N/A
Power: Self-powered; non-powered version
also available (1,000 watts AES at 8 ohms)
Dimensions (h x w x d): 19 x 24.4 x 22.6 inches
Weight: 120 lbs
Type/Format: Proprietary Offset Aperture-loaded, vented; ground-stack
or fly with integrated hardwareComponents: 2 x 18-inch cones
Frequency Response: 22 – 160 Hz
Sensitivity (1 W/1 m): N/A
Max SPL: 142 dB
Nominal Impedance: N/A
Power: Self-powered (modified class D,
2 x 1,700 watts); DSP and proprietary Adaptive Performance
Dimensions (h x w x d): 24 x 31.5 x 31.5 inches
Weight: 210 pounds
:: RWG SPOTLIGHT LISTINGS ::
Martin Audio DSX www.martin-audio.com
Type/Format: Direct-radiating bass reflex; ground-stack or fly with
integrated hardware
Components: 2 x 18 cones
Frequency Response: 35 – 150 Hz (+/-3 dB)
Sensitivity (1 W/1 m): N/A
Max SPL: 146 dB
Nominal Impedance: N/A
Power: Internal; 2,400 watts AES; high- and low-pass filters, delay
Dimensions (h x w x d): 23.4 x 41.7 x 32.8 inches
Weight: 269 pounds
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 58/68
:: Real W rld Gear ::
56 Live Sound International September 2015 www.ProSoundWeb.com
Clair Brothers iS218-M �� www.clairbrothers.com
L-Acoustics SB-18 �� www.l-acoustics.com
K-array KS5 �� www.k-array.com
Outline GTO-SUB �� www.outlinearray.com
Type/Format: Direct radiating in a tuned dual-chamber, dual-reflex
enclosure; ground-stack or flywith integrated hardware
Components: 2 x 18-inch cones
Frequency Response: 38 –
180 Hz (+/- 2 dB)
Sensitivity (1 W/1 m): 103 dB
Max SPL: 134 dB
Nominal Impedance: 4 ohms
Power: 2,400- to 4,000-watt
amplifier recommended
Dimensions (h x w x d): 25.2 x 42 x 27.1 inches
Weight: 214 pounds
Type/Format: Direct-radiating bass reflex;
ground-stack or fly with integrated
hardwareComponents: 1 x 18-inch cone with
vented magnet
Frequency Response: To 32 Hz (-10 dB)
Sensitivity (1 W/1 m): N/A
Max SPL: 136 dB
Nominal Impedance: 8 ohms
Power: 700 watts RMS
Dimensions (h x w x d): 21.3 x 29.5 x 27.8 inches
Weight: 114.5 pounds
Type/Format: Direct-radiating bass reflex; ground-stack or fly (install
only) with integrated
hardware
Components: 2 x 21-inchcones with neodymium
magnets
Frequency Response: 20 –
125 Hz
Sensitivity (1 W/1 m): N/A
Max SPL: 136 dB
Nominal Impedance: N/A
Power: Self-powered (class D, 2 x 3,500 watts); integrated DSP,
onboard touch screen
Dimensions (h x w x d): 23.6 x 45.3 x 33.5 inches
Weight: 230 pounds
Type/Format: Direct-radiating bass reflex; ground-stack or fly with
integrated hardware
Components: 2 x 18-inch cones
Frequency Response: 34 –
107 Hz (+/-3 dB)
Sensitivity (1 W/1 m): 103 dB
(half-space)
Max SPL: 147 dB
Nominal Impedance: 2 x 8 ohmsPower: 2,400 watts AES
Dimensions (h x w x d): 23.6 x 44.3 x 25.8 inches
Weight: 225 pounds
Type/Format: Direct-radiating bass reflex, cardioid
arrayable; ground-stack or fly
with integrated hardware
Components: 2 x 18-inch dual-
coil cones with neodymium
magnets
Frequency Response: 27 – 300 Hz
(+/-3 dB)
Sensitivity (1 W/1 m): 102 dBMax SPL: 144 dB
Nominal Impedance: 2 x 8 ohms
Power: 2 x 2,000 watts continuous
Dimensions (h x w x d): 19.5 x 48.1 x 36.3 inches
Weight: 183 pounds
JBL Professional VTX S28 �� vwww.jblpro.com
Meyer Sound 900-LFC �� www.meyersound.com
Type/Format: Direct-radiating bass
reflex; ground-stack or fly with
integrated hardwareComponents: 1 x 18-inch cone
Frequency Response: 31 – 125 Hz
Sensitivity (1 W/ m): N/A
Max SPL: N/A
Nominal Impedance: N/A
Power: Self-powered (class D)
Dimensions (h x w x d): 24.4 x 27.4 x 24.9 inches
Weight: 136 pounds
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 59/68
The Live Sound International Loudspeaker Demo is the
only place in the world to experience professional PA in a
round robin format. This event presents a unique controlled
environment offering side-by-side listening opportunities to
23 top loudspeaker systems. While you are there, get all
the technical details and pricing information you need from
qualified representatives from participating manufacturers.
Pro Audio Special Event: Tuesday, Nov. 17 at 6:00 p.m.,
there will be a demo session for audio professionals who
cannot attend the daytime sessions.
More than a dozen leading loudspeaker manufacturers
are participating this year, with more to be announced soon.
PARTICIPATING LOUDSPEAKER MANUFACTURERS:
HAVE AN EAR FOR AUDIO?
THINK YOU KNOW PA?EVER HEARD 13 PROFESSIONAL RIGS PLAY
THE SAME TRACK ONE AFTER ANOTHER?
NOW YOU CAN!
Register to attend the
Loudspeaker Demo and
get complimentary access
to the exhibit hall at the
Worship Facilities Expowww.prosoundweb.com/
LSIdemo2015
At the Worship Facilities Expo
November 17-19, 2015 Register for
FREE at www.prosoundweb.com/LSIdemo2015
I N T E R N A T I O N A L
TECH SPONSORS:
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 60/68
:: Real W rld Gear ::
58 Live Sound International September 2015 www.ProSoundWeb.com
QSC KSub �� qsc.com
D.A.S. Audio LX-218CA �� www.dasaudio.com
FBT SUBLine 18Sa �� fbtusa.com
Tannoy VSX 18DR �� tannoy.com
Coda Audio SCP �� www.codaaudio.com
Type/Format: 4th-order bandpass;
ground-stack
Components: 2 x 12-inch cones
Frequency Response: 48 – 134 Hz (-6 dB)
Sensitivity (1 W/1 m): N/A
Max SPL: 130 dB
Nominal Impedance: N/A
Power: Internal; 1,000 watts continuous;
polarity reverse; normal or “deep” LF mode
Dimensions (h x w x d): 26 x 14 x 28.1 inches
Weight: 74 pounds
Type/Format: Bandpass; ground-
stack or fly (install only) with
integrated hardwareComponents: 1 x 18-inch cone
Frequency Response: 32 – 120
Hz (-10 dB)
Sensitivity (1 W/1 m): N/A
Max SPL: 136 dB
Nominal Impedance: N/A
Power: Self-powered (class D,
1,020 watts); selectable modes (BOOST and XTENDED), selectable
crossover, cardioid mode
Dimensions (h x w x d): 26.8 x 22.2 x 28.4 inches
Weight: 110 pounds
Type/Format: Direct-radiating bass reflex; cardioid preset switch for
multiples; ground-stack or fly with integrated hardware
Components: 2 x 18 cones
Frequency Response: 28 – 100
Hz (-10 dB)
Sensitivity (1 W/1 m): N/A Max SPL: 142 dB
Nominal Impedance: N/A
Power: Self-powered (2,400 watts continu-
ous); variable crossover frequency, polarity reversal switch
Dimensions (h x w x d): 22 x 51 x 24.9 inches
Weight: 177 pounds
Type/Format: Direct-radiating bass reflex; ground-stack
Components: 1 x 18-inch cone (custom B&C)
Frequency Response: 33 – 140 Hz (-6 dB)
Sensitivity (1 W/1 m): 103 dB
Max SPL: 133 dB
Nominal Impedance: N/A
Power: Self-powered (class D, 1,200
watts RMS), DSP with presets, polarity
reverse switch; non-powered version
also available
Dimensions (h x w x d): 24.7 x 20 x 25.6 inches
Weight: 92.6 pounds
Type/Format: Direct-radiating
bass reflex; ground-stack
Components: 1 x 18-inchcone
Frequency Response: 40 Hz –
3 kHz (-3 dB)
Sensitivity (1 W/1 m): 99 dB
Max SPL: 135 dB
Nominal Impedance: 8 ohms
Power: 2,000 watts program
Dimensions (h x w x d): 23.1 x 25.6 x 25.6 inches
Weight: 99 pounds
Type/Format: Sensor controlled, vented; ground-stack or fly with
optional hardware
Components: 2 x 18-inch cones
with neodymium magnets
Frequency Response: 25 – 120
Hz (-3 dB)
Sensitivity (1 W/1 m): 103 dBMax SPL: 144 dB
Nominal Impedance: 4 ohms
Power: LINUS10 DSP amplifier recommended (3,000 watts AES,
12,000 watts peak)
Dimensions (h x w x d): 21.6 x 43.6 x 31.5 inches
Weight: 209.4 pounds
Yamaha DXS18 �� www.yamahaproaudio.com
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 61/68
www.ProSoundWeb.com September 2015 Live Sound International 59
Bose RoomMatch RMS215 www.pro.bose.com
Danley Sound Labs TH412 www.danleysoundlabs.com
WorxAudio TrueLine TL218SS www.worxaudio.com
PK Sound KLARITY 218 www.pksound.ca
db technologies DVA S30N www.dbtechnologies.com
Grund Audio GT-LPB-36CX www.grundaudio.com
Type/Format: Direct-radiating in
vented enclosure; ground-stack or fly with optional
mounting kit
Components: 2 x 15-inch cones
Frequency Response: 40 – 280
Hz (-10 dB)
Sensitivity (1 W/1 m): 102 dB
Max SPL: 139 dB
Nominal Impedance: 8 ohms (x2)
Power: PowerMatch amplification recommended; 1,000 watts long-
term, 4,000 watts peak
Dimensions (h x w x d): 17.6 x 37.1 x 21.5 inches
Weight: 132 pounds
Type/Format: Tapped horn (patent pending design); ground-stack
Components: 4 x 12-inch cones
Frequency Response: 33 – 200Hz (-3 dB)
Sensitivity (1 W/1 m): 110 dB
Max SPL: 146 dB
Nominal Impedance: 2 ohms or
paired 4 ohms
Power: External; 4,000 watts
continuous
Dimensions (h x w x d): 26.5 x 45 x 45 inches
Weight: 357 pounds
Type/Format: Direct-radiating in tuned enclosure; ground-stack or fly
with integrated hardware
Components: 2 x 18-inch cones
Frequency Response: 18 –
150 Hz (-10 dB)
Sensitivity (1 W/1 m): 102 dB
Max SPL: 137 dB
Nominal Impedance: 4 ohmsPower: 3,400 watts continu-
ous, 13,600 watts peak
Dimensions (h x w x d): 22.5 x 48 x 30 inches
Weight: 285 pounds
Type/Format: Direct-radiating in ventued enclosure; ground-stack or fly
with integrated hardware
Components: 2 x 18-inch cones
Frequency Response: 35 – 130
Hz (+/-3 dB)
Sensitivity (1 W/1 m): N/A
Max SPL: 135.5 dB
Nominal Impedance: 4 ohms
Power: Self-powered (class D, 1,800 watts), DSP with presets, includ-
ing cardioid mode
Dimensions (h x w x d): 23.1 x 38.9 x 30.1 inches
Weight: 205.1 pounds
Type/Format: Hybrid direct-radiating bass reflex/horn design;
ground-stack
Components: 2 x 18-inch coneswith 4-inch voice coils
Frequency Response: 30 –
120 Hz (+/-3 dB)
Sensitivity (1 W/1 m): N/A
Max SPL: 141 dB
Nominal Impedance: N/A
Power: Self-powered (3,000 watts RMS); phase reversal, variable
crossover frequencies, delay
Dimensions (h x w x d): 23.2 x 44 x 28.8 inches
Weight: 183 pounds
Type/Format: Hybrid (pro-
prietary Linear Pressure
Chambers); ground-stack
Components: 2 x 18-inch
cones with ferrite magnets
Frequency Response: 35 –
200 Hz (-10 dB)Sensitivity (1 W/1 m): 101 dB
Max SPL: N/A
Nominal Impedance: 4 ohms
Power: 4,000 watts program, 8,000 watts peak
Dimensions (h x w x d): 17 x 43.5 x 29.5 inches
Weight: 168 pounds
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 62/68
60 Live Sound International September 2015 www.ProSoundWeb.com
:: Real W rld Gear ::
NEXO STM S118 �� www.nexo-sa.com
Type/Format: Bandpass; ground-stack or fly with integrated hardware
Components: 1 x 18-inch cone with neodymium magnet
Frequency Response: 23 – 100 Hz (-6 dB)Sensitivity (1 W/1 m): 109 dB
Max SPL: 143 dB
Nominal Impedance: 16 ohms
Power: External: NXAMP 4x4 recom-
mended
Dimensions (h x w x d): 27.6 x 22.6 x
28.2 inches
Weight: 187 pounds
Type/Format: Direct-radiating bass reflex; ground-stack
Components: 2 x 18-inch cones
Frequency Response: 34 –100 Hz (+/-3 dB)
Sensitivity (1 W/1 m): N/A
Max SPL: 135 dB
Nominal Impedance: N/A
Power: Self-powered (800
watts RMS)
Dimensions (h x w x d): 24.5 x 44 x 24 inches
Weight: 144 pounds
Mackie SRM2850 �� www.mackie.com
Electro-Voice X12-128 �� www.electrovoice.com
Type/Format: Direct-radiating bass reflex;
ground-stack
Components: 2 x EV DVF4180
18-inch cones
Frequency Response: 33 –
200 Hz (-3 dB)
Sensitivity (1 W/1 m): 105 dB
Max SPL: 147 dB
Nominal Impedance: 4 ohms (parallel mode) and 8 ohms (dual mode)Power: 4,000 watts continuous
Dimensions (h x w x d): 20.4 x 43.5 x 29.9 inches
Weight: 195 pounds
RCF TTS56-A �� www.rcf-usa.com
Type/Format: Direct-radiating bass reflex; ground-stack
Components: 2 x 21-inch cones with neodymium magnets
Frequency Response: 30 – 100 Hz
Sensitivity (1 W/1 m): N/A
Max SPL: 145 dB
Nominal Impedance: N/A
Power: Self-powered (2 x
3,400 watts)
Dimensions (h x w x d): 21.6 x 43.3 x 37.4 inches
Weight: 198 pounds
Turbosound TSW-218 �� www.turbosound.com
Alcons Audio BC543 �� www.alconsaudio.com
Type/Format: Hybrid horn-loaded; ground-stack
Components: 2 x 18-inch cones (carbon fiber and inside/outside wound
voice coils)Frequency Response: 35 – 150
Hz (+/-3 dB)
Sensitivity (1 W/1 m): 104 dB
Max SPL: 141 dB
Nominal Impedance: 4 ohms
Power: 1,600 watts continuous
Dimensions (h x w x d): 22.6 x 55.1 x 30.3 inches
Weight: 222 pounds
Type/Format: Direct-radiating bass reflex; cardioid pattern, with rear-
firing element; ground-stack
Components: 3 x 18-inch high-excursion, carbon-fiber cones with
neodymium magnetsFrequency Response: 35 –
150 Hz (+/-3 dB)
Sensitivity (1 W/1 m): 100 dB
Max SPL: 136 dB (in cardioid
mode)
Nominal Impedance: 4 ohms
front; 8 ohms rear
Power: Control and power via ALC amplified loudspeaker controller
Dimensions (h x w x d): 47.1 x 23.5 x 38 inches
Weight: 298 pounds
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 63/68
Grow. Together.
Help Us Celebrate 10 Years!
• 3 Keynote Sessions
• 100 + educational Conference Sessions for churches of all sizes
• First time ever - Manufacturer Training Sessions
• Visual Worship Workshop
• Inspirational Worship from renowned National Artists
• 2015 Worship Facilities Awards (Solomon and New Product) Winners
• WFX 10th Anniversary Party
Worship FacilitiesConference and Expo
Celebrating years of serving churches
Loud Speaker DemosThe Ultimate Audio Experience: More Than
25 Loudspeaker Systems In 1 Location!
Brought to you by
National Conference and Expo for Church Leaders Seeking
Education, Services and Products
to Grow their Ministry
N a s h v i l l e , T N || M u s i c C i t y C e n t e r
Conference & Expo:
November 18-19Pre-Conference:
November 17
Visit wfxweb.com or call 800-598-6031
Subscribers save 10%! Use Promo Code: LSI15
I N T E R N A T I O N A L
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 64/68
NEWSBYTES:: The latest news from ProSoundWeb.com ::
62 Live Sound International September 2015 www.ProSoundWeb.com
s SynAudCon
is hosting a
three-day Sound
Reinforcementfor Technicians
in-person training
seminar in the Chicago area on October
5-7. Instructor Pat Brown will utilize a
multi-media presentation in focusing
on how to understand the audio signal
chain, establish proper gain structure,
maximize signal-to-noise ratio, equalize
the system, and more. The seminar is
approved for 24 InfoComm RUs and 21
BICSI CECs.The site is the Holiday Inn in Rolling
Meadows, IL, and registration is avail-
able online at www.prosoundtraining.
com. Upcoming seminars include Syn-
AudCon Digital in Washington D.C. on
November 16-18, and Making WirelessWork on December 3-4 in Las Vegas.
s Curt Taipale is presenting his
Church Sound Boot Camp in the San
Diego area on October
2-3. The class will cover
all of the primary com-
ponents of every sound
system, exactly how
they should be con-
nected, how to feel confident in operat-ing that equipment, and how to deliver
a pristine, smooth, clear musical mix
consistently at every worship service.
The site is Unity Way Church in Vista,
CA, with the class held from 5 pm to 10
pm on Friday, October 2 and continuingfrom 9 am to 5 pm on October 3. Attend-
ees are advised to register as soon as
possible, and early registration discounts
are offered. Go to www.churchsoundboot-
camp.com for more details and to register.
s Ed Czarnecki has
been named applica-
tions engineer at Ashly
Audio. Reporting to
executive VP Scott Les-lie, Czarnecki is working with consultants,
integrators, and distributors to provide
ELECTRO-VOICE RECENTLY HELD two launch events in the
U.S. to highlight its new X-Line Advance line array systems,
including a session attended by our own Craig Leerman at the
6,500-capacity Star of the Desert Arena inside of Buffalo Bill’s
Casino in Primm, NV, just south of Las Vegas. The second
event was held a week later in Nashville at the TennesseePerforming Arts Center.
Both X1 and X2 line arrays, as well as X12-128 subwoof-
ers, were showcased in lively programs that included formal
presentations on the systems and technologies, as well as
listening sessions with a live band and pre-recorded tracks.
EV deployed two systems at both events, each with
left-right X1 and X2 arrays joined by a dozen shared
X12-128 subs stacked in a row two high across the
front of the stage.
“The X-Line systems offer a bunch of newer technol-
ogies, but what really caught my eye is the Integrated
Rigging System (IRS) on both the X1 and X2 boxes,”
Leerman reports. “The individual elements are fastened
together into arrays by spring loaded captive twist lock
pins. To use, the pins are retracted and are twisted to lock
them into an open position. The link bars from the next box
(or grid) can be inserted and then the pins are twisted and the
spring loaded pins snap back into their locked position.
“Splay angle of an array is easily selected by inserting a
pin into the angle select section on the rear of a cabinet,” he
continues. “A second pin can be inserted to lock the splay
angle allowing a rigid array to be formed. If the second pin is
left out, the array can be lifted with the cabinets in a straight
line, and then a rear pull-up hoist can be used to compress
the array into the desired curve, with the rigging stopping at
angles selected by the first pins. It’s a slick system that allows
for many deployment options.”
There’s much more about the new X-Line Advance systems
on ProSoundWeb – simply enter “Electro-Voice” in the search
tool on the home page to go directly to the coverage. n
Electro-Voice X-Line Advance Launch Events
ABOVE: EV X-Line Arrays
flying at a launch event.
LEFT: EV crew members
at the Vegas event, left to
right: Jan Wittmann, BobRieder, Preston Stevenson,
Carla Engler, Guillermo
Wabi, and Stu Schatz.
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 65/68
www.ProSoundWeb.com September 2015 Live Sound International 63
WHAT: LSI Loudspeaker Demo
WHERE: Music City Center,Nashville
WHEN: November 17-19
WHY: Back-to-back evaluation of
20-plus line arrays & loudspeakers
WHO: You
MORE: www.prosoundweb.com
Mark Your Calendarsinformation and training about Ashly
products, both pre- and post-sale, as well
as offering solutions to design challenges.
Based at the company’s Webster, NYheadquarters, he’s also supplying train-
ing, consultation and assistance.
s Biamp Systems has
named Frank Pajak as
applications engineer
for the East Coast of
the U.S. Based in Chi-
cago, he’s providing support to custom-
ers using the company’s DSP equipment
in a variety of AV applications. Pajakcomes to Biamp with more than 15 years
of experience in sound engineering and
AV system development, including over-
seeing large design and install projects
at AVI-SPL.
s Access Audio of Cincinnati has
joined the VUE Audiotechnik U.S.
rental network, recently adding al-8 and
al-4 line arrays, al-8SB subwoofers and
V-Series System Engines to its inven-tory. “VUE’s products support Dante,
which was an important factor in the pur-
chase,” notes Chris Knueven, director
of operations at Access Audio. “We’re
using Yamaha CL5 consoles, so to be
able to put the amplifiers and ultimately
the entire VUE PA on the Dante network
is a major benefit for us.
“We also like the way the al-8 and the
al-4 models work together; the rig can
be set up as one big PA or two separatesystems, which offers us great flexibility
for our events.” n
ProSoundWeb provides all of the lat-est pro audio news, and follow PSWon Facebook and Twitter - just go to
www.prosoundweb.com and click on the icons atthe top of the page.
. c o m
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 66/68
64 Live Sound International September 2015 www.ProSoundWeb.com
BACK PAGE
�� IN THE MIDST of a fairly frantic load-in for a show in San
Antonio, we made a horrible discovery. The lighting rig, the
sound system, the entire show was dead. Because the trunk full
of feeder cable was missing.
We were (literally) about a thousand miles from the shop.
Not a good situation, especially when the clock was ticking
and there was less than six hours to showtime.For those who
don’t know, feeder cable is that stuff that defies several laws of
physics. It weighs more than any other known substance and
jumps up to trip us when we’re sneaking around the stage. Onthe good side, it carries all of that fancy electricity from the
panel to those doo-hickeys we make our living with. Well, at
least it does if it actually makes it to the venue.
I was just a hired gun, but because I was running this
circus, and these were my monkeys, I had to make some
decisions. It was not my rig, but it was my problem. After
several years with this crew, I already knew what I wanted
to communicate. But really, this discussion applies to any
crew, and it applies whether you’re in charge or not. The key
is for everyone to stay calm and work through the steps
that lead to survival.First. Bring the crew in and explain the situation.
All work ceases until we’ve opened every case and
are absolutely positive the feeder is missing.
Second. Send the crew back to work. Keep
them on schedule as much as possible and work
around the missing gear.
Third. Find the venue manager or someone
who knows the area to get help in finding a local
rental house. Then start making calls to track
down a replacement. Stay calm on the
phone – panic seems to causethe rates to go up. They can
smell your fear, so best to
keep it under control.
Fourth. Arrange
for the missing
gear to a r r i v e
ASAP. Pay them,
tip them, send
them Christmas
cards and a chunk
of grandma’s bestchocolate cake.
Anything to express your extreme gratitude.
Fifth. Now... call the boss. Not before the other steps are
covered.
In this case, the boss was a thousand miles away. It was
around 5 am. There was absolutely nothing he could have done
for us under those conditions. All he could do was panic and
spew colorful expletives. Honestly, what would you do if woken
from a dead sleep to find out how much money you were about
to lose?
When I told him that the feeder was missing, he lost it. Yep.Saw that coming.
Once he stopped to breathe, I finally got the opportu-
nity to tell him the rest of the story, that the situation was
already resolved. He eventually calmed down. And, after
driving down to the shop, he called back and told me it was
sitting right where the shop guys left it – on the loading
dock. I went back to work, knowing that they were about
to have a really bad day.
It would be great to say that I knew how to
handle these problems from the beginning of
my career, but I didn’t. The right solution was learned by doing it wrong a few times.
Every step in that process is critical.
Don’t freak out. Verify before reacting.
Take control and find an answer. Keep
moving forward. Avoid dropping bombs
on people who are essentially helpless.
Your situation may be different. There
may be a better strategy for fixing stupid
where you live. Regardless of how you do
it, just have one.
By the way, that show went per-fectly, but San Antonio was notorious
for crazy problems. In fact, the next
year the entire truck went missing.
But that’s another story. ■
M. ERIK MATLOCK is
senior editor for Live Sound
International and Pro-
SoundWeb , and has worked
in professional audio for more
than 20 years in live, install,and recording.
Have a strategy or have a crisis, your choice. by M. Erik Matlock
When The Show Hits The Fan
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 67/68
8/20/2019 LSI 1509
http://slidepdf.com/reader/full/lsi-1509 68/68