Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich...

30
Günter Mennig K. Stoeckhert Mold-Making Handbook 3rd Edition

Transcript of Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich...

Page 1: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

Günter MennigK. Stoeckhert

Mold-MakingHandbook

3rd Edition

Page 2: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

Mennig, Stoeckhert Mold-Making Handbook

Page 3: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,
Page 4: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

Mold-Making Handbook

Günter MennigKlaus Stoeckhert

Hanser Publishers, Munich Hanser Publications, Cincinnati

3rd Edition

Page 5: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

The Editors:Prof. Dr.-Ing. Günter Mennig,Technische Universität Chemnitz, Institut für Allg. Maschinenbau und Kunststofftechnik, Chemnitz, GermanyDr.-Ing. Klaus Stoeckhert (†)

Distributed in North and South America by: Hanser Publications 6915 Valley Avenue, Cincinnati, Ohio 45244-3029, USA Fax: (513) 527-8801 Phone: (513) 527-8977 www.hanserpublications.com

Distributed in all other countries by Carl Hanser Verlag Postfach 86 04 20, 81631 München, Germany Fax: +49 (89) 98 48 09 www.hanser.de

The use of general descriptive names, trademarks, etc., in this publication, even if the former are not especially identified, is not to be taken as a sign that such names, as understood by the Trade Marks and Merchandise Marks Act, may accordingly be used freely by anyone.While the advice and information in this book are believed to be true and accurate at the date of going to press, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

Library of Congress Cataloging-in-Publication Data

Werkzeuge der Kunststoffverarbeitung. English. Mold-making handbook / [edited by] G?nter Mennig, Klaus Stoeckhert. -- 3rd Edition. pages cm ISBN 978-1-56990-446-6 (hardcover) 1. Plastics--Molds. I. Mennig, G?nter. II. Stoeckhert, Klaus, 1913- III. Title. TP1150.W4613 2012 668.4’12--dc23 2012027079

Bibliografische Information Der Deutschen Bibliothek Die Deutsche Bibliothek verzeichnet diese Publikation in der Deutschen Nationalbibliografie; detaillierte bibliografische Daten sind im Internet über <http://dnb.d-nb.de> abrufbar.

ISBN 978-1-56990-446-6E-Book-ISBN 978-1-56990-550-0

All rights reserved. No part of this book may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying or by any information storage and retrieval system, without permission in writing from the publisher.

© Carl Hanser Verlag, Munich 2013 Production Management: Steffen Jörg Coverconcept: Marc Müller-Bremer, www.rebranding.de, MünchenCoverdesign: Stephan RönigkTypeset: Manuela Treindl, FürthPrinted and bound by Kösel, KrugzellPrinted in Germany

Page 6: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

About the Book

The book uses European steel grades.

References for the comparison of US and European steel grades are available, for example, from Beuth Verlag (Marks, P., US Steels: A comparison of US and Euro-pean steel grades, German-English (2012), Beuth Verlag, Berlin, www.beuth.de) or at www.key-to-steel.com.

Page 7: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,
Page 8: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

Contributors

Dipl.-Ing. (FH) Christopherus Bader (Chapter 5.2) PRIAMUS SYSTEM TECHNOLOGIES AG, Schaffhausen, Switzerland

Prof. Dr.-Ing. Thomas Bauernhansl (Chapter 1.9) Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA, Stuttgart, Germany

Dr.-Ing. Joachim Berthold (Chapter 1.2) Gummersbach, Germany

André Brandt (Chapter 2.2) HASCO Hasenclever GmbH & Co. KG, Lüdenscheid, Germany

Dipl.-Ing. Otto Eiselen (Chapter 1.4) HECO Maschinen- und Werkzeugbau GmbH, Lohmar, Germany

Alfred Erstling (Chapter 3.2) Wuppertal, Germany

Dipl.-Ing. Thomas Eulenstein (Chapter 2.5 and 5.3) Kunststoff-Institut Lüdenscheid, K.I.M.W. NRW GmbH, Lüdenscheid, Germany

Prof. Dr. Ing. Andreas Gebhardt (Chapter 4.7) CP GmbH, Erkelenz and University of Applied Sciences Aachen, Aachen, Germany

Dipl.-Ing. Josef Gockel (Chapter 2.2) HASCO Hasenclever GmbH & Co. KG, Lüdenscheid, Germany

Ing. Rolf Hentrich (Chapter 1.6 and 4.3) Lahr, Germany

Dipl.-Ing. (FH) Felix Hinken (Chapter 2.1) Schneider Form GmbH, Dettingen/Teck, Germany

Dipl.-Ing. Udo Hinzpeter (Chapter 5.3) Kunststoff -Institut Lüdenscheid; K.I.M.W. NRW GmbH, Lüdenscheid, Germany

Page 9: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

VIII Contributors

Dr.-Ing. Frank Hippenstiel (Chapter 3.1) BGH Edelstahl Siegen GmbH, Siegen, Germany

Robert Hofmann (Chapter 1.11) Hofmann Modellbau, Lichtenfels, Germany

Prof. Dipl.-Ing. Peter Karlinger (Chapter 2.1) University of Applied Sciences Rosenheim, Rosenheim, Germany

Dipl.-Ing. (FH) Armin Klotzbücher (Chapter 4.1) KWO Kunststoffteile GmbH, Offenau, Germany

Dr. Ulrich Knipp (Chapter 1.3) Bergisch Gladbach, Germany

Günter Konzilia (Chapter 1.10) z-werkzeugbau-gmbh, Dornbirn, Austria

Stefan Krüth (Chapter 4.6) J. & F. Krüth GmbH, Solingen, Germany

Bernhard Mack (Chapter 4.2) Mack Erodiertechnik, Langenau, Germany

Dr. Udo Maier (Chapter 1.3) Pulheim, Germany

Prof. Dr.-Ing. Peter Mitschang (Chapter 1.8) Institut für Verbundwerkstoffe GmbH, Kaiserslautern, Germany

Dipl.-Ing. Dirk Paulmann (Chapter 2.3) HASCO Hasenclever GmbH & Co. KG, Lüdenscheid, Germany

Dipl.-Ing. Norbert Reuber (Chapter 1.7) Kurtz GmbH, Kreuzwertheim, Germany

Dipl.-Ing. Manfred Sander (Chapter 2.3) Iserlohn, Germany

Dipl.-Ing. (FH) Dietmar Schäffner (Chapter 4.2) Viscoch GmbH, Widnau, Switzerland

Prof. Dr.-Ing. Alois K. Schlarb (Chapter 1.8) University Kaiserslautern, Kaiserslautern, Germany

Prof. Dr.-Ing. Ralf Schledjewski (Chapter 1.8) Montanuniversität Leoben, Leoben, Austria

Prof. Dr.-Ing. Friedhelm Schlößer (Chapter 5.1) KION Group AG, Wiesbaden, Germany

Page 10: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

IX Contributors

Edgar Seufert (Chapter 3.3) Schmelzmetall Deutschland GmbH, Steinfeld-Hausen, Germany

Dipl.-Ing. Peter Schwarzmann (Chapter 1.5) Illig Maschinenbau GmbH & Co. KG, Heilbronn, Germany

Claudia Steiner (Chapter 4.4) NOVAPAX Kunststofftechnik Steiner GmbH & Co. KG, Berlin, Germany

Prof. Dr.-Ing. Paul Thienel (Chapter 2.4) University of Applied Sciences Südwestfalen, Iserlohn, Germany

Uwe Thiesen (Chapter 5.4) Plastics Germany GmbH & Co. KG, Lohne, Germany

Peter Vetter (Chapter 4.5) Buderus Edelstahl GmbH, Wetzlar, Germany

Dipl.-Betriebsw. Oliver Wandres (Chapter 1.6) Maus GmbH, Karlsruhe, Germany

Prof. Dipl.-Ing. Peter Wippenbeck (Chapter 1.1) Steinbeis-Innovationszentrum Kunststofftechnik, Aalen, Germany

Klaus Zoller (Chapter 1.9) Freudenberg Sealing Technologies GmbH & Co. KG, Weinheim, Germany

Page 11: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,
Page 12: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

Editor’s Preface to the 3rd edition

When this book was first published in Carl Hanser Verlag in 1965 in German, edited by K. Stoeckhert, a market gap was filled, because a second edition was already required after four years, this time in collaboration with H. Domininghaus. The third edition came eleven years later (1980), which already had almost twice the number of pages. It was translated and became the 1 st English edition. Due to the personnel change in the editorship, it then took 15 years until the next edition was published with a slightly altered title in English and German. In addition a Chinese edition was launched for the first time. Again it took some 15 years for the now presented 3rd edition (the 5th in German) to be published.

The present edition is not only updated, but modernized and renewed. This is also indicated by the fact that only six of the “old” authors are still involved, and there are new chapters such as micro injection molds, molds for the rubber industry, or rapid prototyping, while others are no longer applicable. Otherwise, as it was already stated in the preface of the 4th German edition, it still applies that this compilation does not intend to serve as a textbook for the detailed design of an injection mold or to replace the catalogue of a manufacturer of standard mold units, and it is also not the long version of a lecture manuscript either. Rather, the brief description of the basic facts and the latest state of the art for the individual mold types and their manufacture allow a direct comparison in a compact form.

The book still addresses both, the reader who is looking for an introduction to a key area of plastics processing as well as the pronounced specialist to enable quick reading into related technical areas, which can result in ideas for their own work. Each chapter is self-contained; the proposed synergistic effect is achieved especially when the reader not only reads “his” chapter, but is willing to “look outside the box” of his own specialist field.

Chemnitz, April 2013 Günter Mennig

Page 13: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,
Page 14: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

Contents

About the Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V

Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VII

Editor’s Preface to the 3rd edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XI

1 Molds for Various Processing Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.1 Injection Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

P. Wippenbeck1.1.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.1.2 Injection Molding Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.1.3 Design of the Molded Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71.1.4 Basic Mold Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91.1.5 Types of Ejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101.1.5.1 Products without Undercuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101.1.5.2 Products with External Undercuts . . . . . . . . . . . . . . . . . . . . . . . . 131.1.5.3 Product with Internal Undercuts . . . . . . . . . . . . . . . . . . . . . . . . . . 171.1.5.4 Products with Internal Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . 191.1.6 Gate Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211.1.6.1 Gate Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211.1.6.2 Solidifying Runner, Remaining at the Molded Part . . . . . . . . . 231.1.6.3 Automatically Separated Runner . . . . . . . . . . . . . . . . . . . . . . . . . . 261.1.6.4 Pass Through Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291.1.6.5 Hotrunner Molds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311.1.6.6 Hotrunner Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341.1.7 Venting of the Cavity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371.1.8 Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391.1.9 Special Designs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411.1.9.1 Stack Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411.1.9.2 Injection-Compression Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431.1.9.3 Multi-Component Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Page 15: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XIV Contents

1.1.9.4 Outsert Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 481.1.9.5 Molds for Thermosets and Elastomers . . . . . . . . . . . . . . . . . . . . . 49

1.2 Compression and Transfer Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52J. Berthold1.2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521.2.2 Compression Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531.2.2.1 General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531.2.2.2 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 551.2.2.3 Components of a Compression Mold . . . . . . . . . . . . . . . . . . . . . . . 561.2.3 Transfer Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 561.2.3.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 561.2.3.2 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 571.2.3.3 Structure of a Transfer Mold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 571.2.4 Making Compression Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 581.2.4.1 Machining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 591.2.5 Mold Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 591.2.5.1 Types of Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601.2.5.1.1 Small-Series Mold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601.2.5.1.2 Test Mold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601.2.5.1.3 Standard Mold Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601.2.5.1.4 Conventional Compression Mold . . . . . . . . . . . . . . . . . . . . . . . . . . 621.2.5.2 Structural Mold Designs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 621.2.5.2.1 Positive Mold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 621.2.5.2.2 Positive Mold with Lands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 631.2.5.2.3 Multi-Cavity Mold with a Common Loading Chamber. . . . . . . 641.2.5.2.4 Multi-Cavity Mold with Individual Loading Chambers . . . . . . 641.2.5.2.5 Mold with Lateral Core Puller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 651.2.5.2.6 Split Mold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 661.2.5.2.7 Hinged Split-Cavity Mold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 661.2.5.2.8 Mold with Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 671.2.5.2.9 Unscrewing Mold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 671.2.5.3 General Aspects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 681.2.6 Sheet Molding Compound (SMC)-Molds . . . . . . . . . . . . . . . . . . . 691.2.6.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 691.2.6.2 Mold Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 701.2.6.2.1 Mold Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 721.2.6.2.2 Ejector Mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 731.2.6.2.3 Undercuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 741.2.6.2.4 Heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 751.2.7 GMT/LFT Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 751.2.7.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Page 16: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XV Contents

1.2.7.2 Process Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 761.2.7.2.1 Pressure Forming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 761.2.7.2.2 Flow Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 761.2.7.3 Mold Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 761.2.8 Practical Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

1.3 Molds for Polyurethane Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78U. Knipp, U. Maier1.3.1 Products, Processes, Applications, Shrinkage, and Mold

Carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 791.3.1.1 Material Components, Processing, Applications . . . . . . . . . . . . 791.3.1.2 Shrinkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 801.3.1.3 Mold Carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 811.3.2 Molds for Low-Density PUR Foam . . . . . . . . . . . . . . . . . . . . . . . . . 821.3.2.1 Processing Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 831.3.2.1.1 Reaction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 831.3.2.1.2 Internal Pressure in Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 841.3.2.2 Filling Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 851.3.2.2.1 Open-Mold Filling Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 851.3.2.2.2 Closed-Mold Filling Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 861.3.2.3 Venting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 871.3.2.4 Mold Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 891.3.2.4.1 Clamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 911.3.2.4.2 Closing and Opening Mechanism, Demolding Aids . . . . . . . . . 921.3.2.4.3 Fastening of Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 931.3.2.5 Molds for Flexible PUR Foams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 931.3.2.6 Molds for Semirigid Foams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 951.3.2.7 Molds for Rigid PUR Foams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 961.3.3 Molds for PUR Integral Skin Foams (Self-Skinning Foams) . . 991.3.3.1 Influence of Processing on Mold Design . . . . . . . . . . . . . . . . . . . 991.3.3.1.1 Temperature control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 991.3.3.1.2 Sealing at Parting Line, Ejectors, and Side Cores/Sliders . . 1001.3.3.2 Gating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1011.3.3.3 Venting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1031.3.3.4 Molds for Flexible Integral Skin Foams . . . . . . . . . . . . . . . . . . . 1051.3.3.5 Molds for Semirigid Integral Skin Foams . . . . . . . . . . . . . . . . . 1051.3.3.6 Molds for Rigid Integral Skin Foams . . . . . . . . . . . . . . . . . . . . . 1061.3.4 Molds for Microporous PUR Products . . . . . . . . . . . . . . . . . . . . 1071.3.4.1 Molds for Flexible, Microporous PUR Products . . . . . . . . . . . . 1081.3.4.2 Molds for Tough, Rigid, Microporous PUR (RIM) Products . 1081.3.4.3 Molds for Rigid, Microporous PUR Products . . . . . . . . . . . . . . 1091.3.5 Molds for PUR Casting Systems . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Page 17: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XVI Contents

1.4 Blow Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112O. Eiselen1.4.1 Process Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1121.4.1.1 Different Types of Blow Molding Processes . . . . . . . . . . . . . . . 1121.4.1.2 Extrusion Blow Molding Technology . . . . . . . . . . . . . . . . . . . . . 1131.4.1.2.1 Continuous Extrusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1131.4.1.2.2 Intermittent Parison Generation . . . . . . . . . . . . . . . . . . . . . . . . . 1141.4.1.2.3 Parison Generation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1161.4.1.2.4 Different Blow Up Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1171.4.1.2.5 Special Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1191.4.2 Extrusion Blow Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1201.4.2.1 Mold Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1201.4.2.1.1 Prototype Blow Molds Made from Cast Resin . . . . . . . . . . . . . . 1201.4.2.1.2 Prototype Blow Molds with Metal-Coated Model and

Metal-Filled Cast Resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1201.4.2.1.3 Blow Molds Made from Cast Metals . . . . . . . . . . . . . . . . . . . . . . 1201.4.2.1.4 Milled Prototype Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1211.4.2.1.5 Production Blow Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1211.4.2.2 Construction Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1231.4.2.2.1 Alignment of Blow Mold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1231.4.2.2.2 Cutting Edges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1241.4.2.2.3 Clamp Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1261.4.2.2.4 Venting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1261.4.2.3 Blow Mold Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1261.4.2.4 Accessories for Blow Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1291.4.2.5 Integrated Postmolding Processes . . . . . . . . . . . . . . . . . . . . . . . . 1301.4.2.5.1 Postcooling with a Cooling Fixture . . . . . . . . . . . . . . . . . . . . . . . 1301.4.2.5.2 Manufacturing the Finished Product in the Blow Molding

Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1311.4.3 Injection Blow Molding and Dip Blow Molding . . . . . . . . . . . . 1331.4.4 Use of Computers for Blow Molding . . . . . . . . . . . . . . . . . . . . . . 135

1.5 Molds for Thermoforming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138P. Schwarzmann1.5.1 General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1381.5.2 Process in Thermoforming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1391.5.3 The Mold and the Format Parts . . . . . . . . . . . . . . . . . . . . . . . . . . 1391.5.4 Positive or Negative Forming? . . . . . . . . . . . . . . . . . . . . . . . . . . . 1411.5.5 Design Guidelines for Thermoforming Molds . . . . . . . . . . . . . 1411.5.5.1 Material Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1411.5.5.2 Molding Shrinkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1441.5.5.3 Draft Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Page 18: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XVII Contents

1.5.5.4 Radii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1451.5.5.5 Surface Roughness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1471.5.5.6 Assisting Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1471.5.5.7 Venting Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1501.5.5.8 Cavities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1521.5.5.9 Avoidance of Edge Webbing in Positive Molds . . . . . . . . . . . . . 1521.5.5.10 Vacuum Losses when Designing Mold Bottom Wrongly . . . . 1531.5.5.11 Suggestions for Temperature Control of Hot Forming

Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1541.5.6 Substructure of Hot Forming Molds . . . . . . . . . . . . . . . . . . . . . . 1551.5.6.1 Vacuum Forming on a Sheet Processing Machine . . . . . . . . . 1551.5.6.2 Pressure Air Forming with Forming/Punching Mold

with Shear Cutting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1561.5.6.3 Pressure Air Forming with Forming/Punching Mold

with Steel Rule Die . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1571.6 Rotational and Slush Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158

O. Wandres, R. Hentrich1.6.1 Process Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1581.6.2 Strength of a Rotomolded Part . . . . . . . . . . . . . . . . . . . . . . . . . . . 1581.6.3 Mold Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1591.6.4 Nomenclature of Rotational Molds . . . . . . . . . . . . . . . . . . . . . . . 1601.6.5 Types of Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1611.6.5.1 Prototype Rotational Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1611.6.5.2 Sheet Steel Rotational Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1621.6.5.3 Aluminum Rotational Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1631.6.5.4 Electroplated Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1651.6.6 Mold Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1681.6.6.1 Closing and Clamping of Molds . . . . . . . . . . . . . . . . . . . . . . . . . . 1681.6.6.2 Mold Wall Thickness and Centering . . . . . . . . . . . . . . . . . . . . . . 1691.6.6.3 Mold Surfaces and Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1691.6.7 Mold Peripheral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1701.6.7.1 Mold Venting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1701.6.7.2 Non-Permanent Release Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . 1711.6.7.3 Mold Coating (Permanent Release Coatings) . . . . . . . . . . . . . . 1711.6.7.4 Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1721.6.7.5 Other Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1721.6.8 Post-Processing of Rotomolded Plastic Products . . . . . . . . . . . 1721.6.8.1 Openings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1721.6.8.2 Decoration of Rotomolded Plastic Products . . . . . . . . . . . . . . . . 1721.6.9 Electroplated Mold for the Slush Molding Process . . . . . . . . . 173

Page 19: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XVIII Contents

1.7 Molds for Thermoplastic Foams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179N. Reuber1.7.1 Thermoplastic Foams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1791.7.2 Conventional Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1821.7.2.1 Procedure Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1821.7.2.1.1 Filling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1831.7.2.1.2 Expanding and Fusing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1841.7.2.1.3 Cooling and Stabilizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1861.7.2.1.4 Demolding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1871.7.2.2 Special Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1881.7.2.2.1 Process with Non-Perforated Molds . . . . . . . . . . . . . . . . . . . . . . 1881.7.2.2.2 Low Temperature Horizontal (LTH) Process . . . . . . . . . . . . . . . 1881.7.2.2.3 Transfer Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1891.7.2.2.4 Multiple-Density-Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1891.7.3 Mold Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1901.7.3.1 Essential Requirements on the Mold Construction . . . . . . . . 1901.7.3.2 Mold Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1931.7.3.3 Mold Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1931.7.3.4 Special Mold Designs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1961.7.3.4.1 Mono-Block Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1961.7.3.4.2 Molds with Adjustable Walls (Gradually or Continuously)

for Insulation Plates and Small Blocks . . . . . . . . . . . . . . . . . . . . 1961.7.3.4.3 Mold for the Thin-Walled Technology . . . . . . . . . . . . . . . . . . . . . 1971.7.4 Block Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1971.7.4.1 Process Discription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1971.7.4.2 Constructive Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199

1.8 Molds for Continuous Fibre Reinforced Polymer Composites . . . . . . . . . 200P. Mitschang, R. Schledjewski, A. K. Schlarb1.8.1 General Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2001.8.2 Molds for the Vacuum-Autoclave-Technology . . . . . . . . . . . . . . 2011.8.2.1 General Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2011.8.2.2 Prepreg-Low Pressure-Autoclave Technology . . . . . . . . . . . . . . 2021.8.2.3 Molds for the “Soft Core” Technology . . . . . . . . . . . . . . . . . . . . . 2021.8.2.3.1 Master Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2021.8.2.3.2 Mold Cavity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2031.8.2.3.3 Product Substitute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2041.8.2.3.4 Elastic Mat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2051.8.2.3.5 Manufacturing of Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2051.8.2.4 Molds for the Hard-Core Technology . . . . . . . . . . . . . . . . . . . . . 2071.8.2.4.1 Mold Construction and Materials . . . . . . . . . . . . . . . . . . . . . . . . 2071.8.2.4.2 Manufacture of Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207

Page 20: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XIX Contents

1.8.2.5 Molds for Automated Tape Laying . . . . . . . . . . . . . . . . . . . . . . . . 2081.8.3 Continuous Fiber-Reinforced Thermoplastics . . . . . . . . . . . . . 2091.8.3.1 General Information and Fundamentals of the Processes . . 2091.8.3.2 Molds for Semifinished Part Production . . . . . . . . . . . . . . . . . . 2091.8.3.2.1 General Information and Fundamentals of the Processes . . 2091.8.3.2.2 Molds for Flat Semifinished Plates . . . . . . . . . . . . . . . . . . . . . . . 2101.8.3.2.3 Molds for Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2121.8.3.3 Molds for Forming Technology (Thermoforming) . . . . . . . . . . 2131.8.3.3.1 General Information and Fundamentals of the Processes . . 2131.8.3.3.2 Molds for the Stamp Forming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2141.8.3.3.3 Molds for the Diaphragm Technology . . . . . . . . . . . . . . . . . . . . . 2171.8.3.3.4 Molds for Sandwich Components . . . . . . . . . . . . . . . . . . . . . . . . . 2181.8.3.3.5 Molds for the Process Step Integration . . . . . . . . . . . . . . . . . . . 2191.8.3.4 Molds for the Welding Technology . . . . . . . . . . . . . . . . . . . . . . . 2201.8.4 Molds for the Resin Injection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2211.8.4.1 General Information and Fundamentals of the Process . . . . 2211.8.4.2 Molds for the Preform Technology . . . . . . . . . . . . . . . . . . . . . . . 2231.8.4.2.1 Binder-Forming Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2231.8.4.2.2 Stitching Technology Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2251.8.4.3 Molds for Vacuum Assisted Processes . . . . . . . . . . . . . . . . . . . . 2271.8.4.3.1 Molds with a Fixed and Flexible Mold Half. . . . . . . . . . . . . . . . 2271.8.4.3.2 Molds with Two Fixed Mold Halves . . . . . . . . . . . . . . . . . . . . . . 2301.8.4.4 Molds for Pressure-Assisted Processes . . . . . . . . . . . . . . . . . . . 2321.8.4.5 Molds for Hollow Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 2351.8.5 Molds for the Winding Technology . . . . . . . . . . . . . . . . . . . . . . . 2381.8.5.1 General Information and Fundamentals of the Process . . . . 2381.8.5.2 Molds for Rotationally Symmetrical Components . . . . . . . . . . 238

1.9 Molds for Elastomer Processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241Th. Bauernhansl, K. Zoller1.9.1 Compression Molding (CM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2421.9.2 Transfer Molding (TM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2441.9.3 Injection Molding (IM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2461.9.4 Additional Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2501.9.4.1 Process Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2501.9.4.2 Gate Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2511.9.5 Mold Making . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2541.9.5.1 Types of Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2551.9.5.2 Mold Development . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255

Page 21: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XX Contents

1.10 Micro Injection Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258G. Konzilia1.10.1 General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2581.10.1.1 Injection Molding Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2581.10.1.2 Molded Part Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2581.10.1.2.1 Cooperation with Customers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2591.10.1.3 Materials for Injection Molded Parts . . . . . . . . . . . . . . . . . . . . . 2601.10.2 Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2611.10.2.1 The Micro-injection Mold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2611.10.2.1.1 Gate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2611.10.2.1.2 Demolding and Ejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2621.10.2.1.3 Venting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2631.10.2.1.4 Mold Guiding and Centering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2641.10.2.1.5 Temperature Control and Cooling . . . . . . . . . . . . . . . . . . . . . . . . 2651.10.2.2 Special Procedures and Alternative Processes . . . . . . . . . . . . 2651.10.2.2.1 Variotherm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2651.10.2.2.2 Insertion Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2661.10.2.2.3 Multi-Component and Assembly Injection Molding . . . . . . . . 2661.10.2.2.4 Compression Injection Molding . . . . . . . . . . . . . . . . . . . . . . . . . . 2671.10.2.2.5 Hot Embossing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2671.10.2.3 Environment and Continuing Processes . . . . . . . . . . . . . . . . . . 2681.10.3 Manufacture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2691.10.3.1 Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2691.10.3.1.1 Materials for Constructional Parts . . . . . . . . . . . . . . . . . . . . . . . 2691.10.3.1.2 Standard Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2691.10.3.2 Cavity Stacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2691.10.3.2.1 Material for Cavity Stacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2701.10.4 Manufacturing Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2701.10.4.1 In General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2701.10.4.1.1 Mechanical Manufacturing Technologies . . . . . . . . . . . . . . . . . 2701.10.4.1.2 Alternative Manufacturing Processes . . . . . . . . . . . . . . . . . . . . 2741.10.4.1.3 Surface Treatment and Refining . . . . . . . . . . . . . . . . . . . . . . . . . 2761.10.4.1.4 Quality Assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2771.10.5 Injection Molding Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2771.10.6 Mold Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2781.10.7 Outlook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279

1.11 Prototype, Small and Pre-Series Molds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280R. Hofmann1.11.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2801.11.2 Indirect Prototype Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2801.11.2.1 Vacuum Casting Polyurethane (PU) on silicone molds . . . . . 280

Page 22: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XXI Contents

1.11.2.1.1 Vacuum Casting PU Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2801.11.2.1.2 Manufacture of Silicone Molds PU . . . . . . . . . . . . . . . . . . . . . . . 2831.11.2.2 Vacuum Casting Polyamide (PA) through silicone molds . . . 2841.11.2.3 Synthetic Resin Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2871.11.2.3.1 Polyurethane Casting with Synthetic Resin Molds . . . . . . . . . 2871.11.2.3.2 Manufacture of Synthetic Resin Molds . . . . . . . . . . . . . . . . . . . 2871.11.2.4 Manufacture of Synthetic Resin Molds for Injection

Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2901.11.2.5 Molds Manufactured through Generative Manufacturing

Procedures on the Example of LaserCUSING®-Technology . 2921.11.2.6 Aluminum Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2941.11.2.6.1 Manufacture of Aluminum Molds . . . . . . . . . . . . . . . . . . . . . . . . 2941.11.2.6.2 Aluminum Molds with LaserCUSING® Loose Parts . . . . . . . . 2951.11.2.6.3 Aluminum Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295

2 Mold Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3012.1 Design Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301

P. Karlinger, F. Hinken2.1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3012.1.1.1 Injection Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3032.1.1.2 Phases of the Mold Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3032.1.1.3 From the Offer to the Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3072.1.1.4 The Design Process in Injection Molds . . . . . . . . . . . . . . . . . . . 3182.1.2 Simulation for Injection Mold Making . . . . . . . . . . . . . . . . . . . . 3232.1.2.1 General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3232.1.2.2 The Types of Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3252.1.2.3 The Flow Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3262.1.2.4 Shrinkage and Warpage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3282.1.2.5 Thermal Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3292.1.2.6 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331

2.2 Standardization and Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332J. Gockel, A. Brandt2.2.1 Standardization for Injection Molding and Hot Runner

Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3322.2.2 Standards in Mold Making . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3352.2.2.1 Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3362.2.2.2 Standardized Guide Element in Mold Making . . . . . . . . . . . . . 3412.2.2.3 Standards for Demolding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3432.2.2.4 Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345

Page 23: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XXII Contents

2.3 Hot and Cold Runner Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349D. Paulmann, M. Sander2.3.1 Advantages of Using the Hot Runner Technology . . . . . . . . . . 3492.3.2 Design of Hot Runner Systems and Hot Halves . . . . . . . . . . . . 3512.3.3 Application Areas and Examples . . . . . . . . . . . . . . . . . . . . . . . . . 3522.3.3.1 Hot Runner Solutions for Packaging Parts, Closures, and

Miscellaneous Polyolefin Applications . . . . . . . . . . . . . . . . . . . . 3532.3.3.2 Hot Runner Solutions for Technical Components . . . . . . . . . . 3562.3.3.3 Hot Runner Solution for Small and Micro Injection Molded

Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3582.3.3.4 Hot Runner Solutions for Multi-Point Gating through

Nozzles and Multi-Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3602.3.3.5 Hot Runner Solutions with Needle Valve . . . . . . . . . . . . . . . . . . 3612.3.4 Hot Runner Manifold Systems, Wired Systems, and Hot

Halves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3672.3.5 Hot Runner Control Technology . . . . . . . . . . . . . . . . . . . . . . . . . . 3702.3.6 Cold Runner Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3722.3.6.1 Function and Advantages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3722.3.6.2 Processable Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3732.3.6.3 Mold Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3752.3.6.4 Demolding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3752.3.6.5 Mold Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376

2.4 Temperature Control of Injection Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377P. Thienel2.4.1 Tasks and Goals of the Mold Temperature Control . . . . . . . . . 3772.4.2 Influence of Processing Temperatures on the Cooling and

Cycle Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3792.4.3 Cavity Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3792.4.4 Influence of Temperature Control on the Molded Part

Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3812.4.5 Requirements for the Temperature Control System . . . . . . . . 3832.4.6 Temperature Control Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . 3832.4.7 Flow Principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3852.4.7.1 Series Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3852.4.7.2 Parallel Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3862.4.8 Practical Designs of Conventional Temperature Control

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3872.4.8.1 Flat Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3872.4.8.2 Temperature Control of Molded Part Corners . . . . . . . . . . . . . 3882.4.8.3 Temperature Control of the Core . . . . . . . . . . . . . . . . . . . . . . . . . 3892.4.8.3.1 Temperature Control Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389

Page 24: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XXIII Contents

2.4.8.3.2 Separating Plate (Deflection Bar) . . . . . . . . . . . . . . . . . . . . . . . . . 3892.4.8.3.3 Spiral Cores . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3902.4.8.3.4 Heat Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3902.4.8.4 More Conventional Temperature Control Options . . . . . . . . . 3922.4.8.4.1 Circumferential Application Temperature Control . . . . . . . . . 3922.4.8.4.2 Inserts Made from Different Materials . . . . . . . . . . . . . . . . . . . . 3922.4.9 New Temperature Control Technologies . . . . . . . . . . . . . . . . . . 3932.4.9.1 Contour-Depending Temperature Control . . . . . . . . . . . . . . . . . 3932.4.9.1.1 Vacuum Brazing Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3942.4.9.1.2 Selective Laser Sintering (SLS) . . . . . . . . . . . . . . . . . . . . . . . . . . . 3952.4.9.2 CO2 Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3952.4.9.2.1 CO2 Temperature Control with Sintered Material . . . . . . . . . . 3962.4.9.2.2 CO2 Temperature Control with Conventional Steel . . . . . . . . . 3972.4.9.3 Dynamic Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 3972.4.10 Thermal Mold Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4002.4.11 Position of the Temperature Sensor for External

Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4022.5 Innovative Mold Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405

T. Eulenstein2.5.1 Coating Technology – Design Surfaces through Combined

Surface and Coating Technologies . . . . . . . . . . . . . . . . . . . . . . . . 4052.5.2 Temperature Control Technology –

Inductive Heating of Injection Molds . . . . . . . . . . . . . . . . . . . . . 4102.5.3 Vacuum Technology –

Alternative Possibilities, Optimization of Surfaces . . . . . . . . . 4152.5.4 Mold Technology – Flexible Sealing Elements for the Flash-

and Damage-Free Encapsulation of Inserts . . . . . . . . . . . . . . . . 417

3 Materials for Mold Making . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4213.1 Plastic Mold Steels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421

F. Hippenstiel3.1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4213.1.2 Steel making and processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4233.1.2.1 Steelmaking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4233.1.2.2 Heat treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4253.1.2.3 Machining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4273.1.2.4 Surface machining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4273.1.2.5 Quality assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4283.1.3 Overview of plastic mold steels . . . . . . . . . . . . . . . . . . . . . . . . . . 4283.1.3.1 Pre-hardened plastic mold steels . . . . . . . . . . . . . . . . . . . . . . . . . 4343.1.3.2 Through-hardening plastic mold steels . . . . . . . . . . . . . . . . . . . 436

Page 25: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XXIV Contents

3.1.3.3 Corrosion-resistant plastic mold steels . . . . . . . . . . . . . . . . . . . 4373.1.3.4 Plastic mold steels for case hardening . . . . . . . . . . . . . . . . . . . . 4393.1.3.5 Precipitation hardening plastic molds steels . . . . . . . . . . . . . . 4403.1.3.6 Nitriding steels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4413.1.4 Concluding comment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441

3.2 Aluminum Alloys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442A. Erstling3.2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4423.2.2 Mold Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4433.2.2.1 Casting Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4443.2.2.2 Wrought Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4443.2.2.3 Mechanical Properties and Design Guidelines . . . . . . . . . . . . 4463.2.2.4 Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4483.2.2.5 Friction and Wear Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4493.2.3 Manufacture of Aluminum Molds . . . . . . . . . . . . . . . . . . . . . . . . 4513.2.3.1 Abrasive Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4513.2.3.1.1 Machining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4513.2.3.1.2 Grinding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4543.2.3.1.3 Electrical Discharge Machining (EDM) or Wire EDM . . . . . . 4543.2.3.1.4 Etching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4543.2.3.2 Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4543.2.3.3 Casting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4573.2.4 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458

3.3 Copper Alloys-Nonferrous Metals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 460E. Seufert3.3.1 Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4603.3.1.1 Strength Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4603.3.1.2 Thermal Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4623.3.2.1 Turning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4643.3.2.2 Milling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4653.3.2.3 Drilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4653.3.2.4 Threading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4663.3.2.5 Reaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4663.3.2.6 EDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4673.3.2.7 Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4673.3.3 Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4683.3.3.1 Polishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4693.3.3.2 Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4693.3.3.3 Structuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4703.3.4 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470

Page 26: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XXV Contents

4 Manufacturing and Machining Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4714.1 Mold Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471

A. Klotzbücher4.1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4714.1.2 Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4714.1.2.1 Development . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4714.1.2.2 Visualizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4724.1.2.3 Cubing Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4724.1.2.4 Stereolithography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4724.1.3 Data Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4744.1.3.1 Data Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4744.1.3.2 Completion of Product Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4744.1.4 Data Transfer in Mold Making . . . . . . . . . . . . . . . . . . . . . . . . . . . 4754.1.4.1 Verifying of Data Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4754.1.4.2 Feasibility Studies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4754.1.5 Feedback/Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4764.1.6 Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4774.1.6.1 System Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4774.1.6.2 Releases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4784.1.7 Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4804.1.7.1 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4804.1.7.2 Strategies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4824.1.7.3 Choice of Machinery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4824.1.8 Machining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4834.1.8.1 Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4834.1.8.2 Unattended Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4844.1.8.3 Releases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4844.1.9 Dimensional Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4854.1.10 Drilling/Deep Hole Drilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4854.1.11 Electric Discharge Machining . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4864.1.12 Surface Finishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4874.1.13 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4874.1.14 Trials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4894.1.15 Optimization Process and Finishing . . . . . . . . . . . . . . . . . . . . . . 489

4.2 Electric Discharge Machining (EDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490D. Schäffner, B. Mack4.2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4904.2.2 Physical Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4924.2.3 Tolerances and Key Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4944.2.4 Die-Sinking EDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4944.2.5 Wire-cut EDM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497

Page 27: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XXVI Contents

4.2.6 Combined and Special Processes . . . . . . . . . . . . . . . . . . . . . . . . . 5004.3 Galvanized Inserts and Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502

R. Hentrich4.3.1 General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5024.3.2 Process Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5024.3.3 Galvanized Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5044.3.4 Model Materials and Model Design . . . . . . . . . . . . . . . . . . . . . . . 5054.3.5 Clamps and Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . 5074.3.6 Finishing and Installation of Galvanized Injection Inserts . 5094.3.7 Efficiency and Service Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5104.3.8 Galvanized Molds for Other Plastics Processing Methods . . 5134.3.8.1 Molds for Processing Polyurethane Foam . . . . . . . . . . . . . . . . . 5144.3.8.2 PUR Spray Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5154.3.8.3 Laminating Molds for the Aerospace Industry. . . . . . . . . . . . . 5164.3.9 Negative-Stamping Deep Drawing Process

(In-Mold Graining) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5194.4 Polishing Technology in Mold Making . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521

C. Steiner4.4.1 General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5214.4.2 Definition of the Term Surface Roughness . . . . . . . . . . . . . . . . 5214.4.3 Systematic Polishing Technique . . . . . . . . . . . . . . . . . . . . . . . . . . 5224.4.4 Polishing Behavior-Influencing Factors . . . . . . . . . . . . . . . . . . . 5244.4.5 Polishing Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5244.4.5.1 For Superfinishing (Polishing) Surface Preparatory

Leveling Technology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5244.4.5.2 Lapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5274.4.5.3 Polish Lapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5304.4.5.4 Polishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5314.4.6 Ultrasonics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5324.4.7 Electric Discharge Machining/Erosion for Brilliant

Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5324.5 Heat Treatment and Surface Finishing Techniques . . . . . . . . . . . . . . . . . . 534

P. Vetter4.5.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5344.5.2 Heat treatment of plastic mold steels . . . . . . . . . . . . . . . . . . . . . 5344.5.2.1 Hardened and tempered plastic mold steels . . . . . . . . . . . . . . . 5354.5.2.2 Through-hardening steels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5364.5.2.3 Corrosion-resistant steels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5424.5.2.4 Case-hardening steels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5434.5.2.5 Nitriding steels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5434.5.2.6 Maraging mold steels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 543

Page 28: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XXVII Contents

4.5.2.7 General recommendations for heat treatment . . . . . . . . . . . . . 5444.5.3 Surface finishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5454.5.3.1 Thermal processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5474.5.3.1.1 Flame hardening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5484.5.3.1.2 Laser hardening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5494.5.3.2 Thermo-chemical processes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5504.5.3.2.1 Case-hardening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5504.5.3.2.2 Nitriding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5524.5.3.2.3 Gas nitriding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5534.5.3.2.4 Plasma nitriding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5544.5.3.2.5 Boriding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5554.5.3.3 Electrochemical processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5554.5.3.3.1 Hard chrome plating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5564.5.3.3.2 Nickel plating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5584.5.3.4 Chemical and physical processes. . . . . . . . . . . . . . . . . . . . . . . . . 5604.5.3.4.1 CVD coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5604.5.3.4.2 PACVD coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5614.5.3.4.3 PVD coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5614.5.3.5 Comparing and Selecting Surface Treatment Processes . . . . 564

4.6 Surface Structuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567St. Krüth4.6.1 The Photochemical Etching Technology . . . . . . . . . . . . . . . . . . . 5674.6.1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5674.6.1.2 Why Structuring? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5684.6.1.3 From the Structure Template to the Film . . . . . . . . . . . . . . . . . 5694.6.2 Requirements on the Mold Surface and Construction . . . . . . 5694.6.2.1 Materials and the Selection of Materials . . . . . . . . . . . . . . . . . . 5704.6.2.1.1 Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5714.6.2.1.2 Aluminum and Other Materials . . . . . . . . . . . . . . . . . . . . . . . . . . 5714.6.2.1.3 Heat Treatment and Surface Refinement. . . . . . . . . . . . . . . . . . 5714.6.2.1.4 Grain Depths and Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5724.6.2.1.5 The Gloss Level in the Mold and in the Molded Part . . . . . . . 5734.6.2.2 Processing Methods and Repair Technology . . . . . . . . . . . . . . 5744.6.2.3 Draft Angles, Open Spaces, and Surface Preparation . . . . . . 5744.6.2.4 Contour Changes by Welding of Inserts . . . . . . . . . . . . . . . . . . . 5754.6.2.5 Contour Changes by Shrinking Inserts . . . . . . . . . . . . . . . . . . . 5764.6.2.6 Structure Hardening, Fiber Orientation, Band-Type

Formation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5774.6.2.7 Etching Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5784.6.3 Special Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5794.6.3.1 Design Types and Etching Combinations . . . . . . . . . . . . . . . . . 579

Page 29: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XXVIII Contents

4.6.3.2 Limitations of the Processing Technology . . . . . . . . . . . . . . . . . 5794.6.3.3 New Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5804.6.4 The Execution of the Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5814.6.4.1 Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5814.6.4.2 Information about the Grain Area and the Mold . . . . . . . . . . . 5814.6.4.3 Concluding Remark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 581

4.7 Rapid Prototyping in Mold Making . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 582A. Gebhardt4.7.1 Rapid Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5824.7.2 Fundamentals of the Generative Manufacturing Processes 5834.7.2.1 Process Principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5834.7.2.2 Data Flow and Data Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5844.7.2.3 Properties of Generative Components . . . . . . . . . . . . . . . . . . . . 5844.7.2.4 Definitions for Rapid Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5864.7.3 Generative Processes for Mold Making . . . . . . . . . . . . . . . . . . . 5874.7.3.1 Polymerization-Stereolithography . . . . . . . . . . . . . . . . . . . . . . . . 5884.7.3.2 Sintering and Melting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5904.7.3.3 Layer-Laminate Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5924.7.3.4 Extrusion Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5944.7.3.4.1 3D Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5964.7.4 Machines for Generative Mold Making . . . . . . . . . . . . . . . . . . . 5984.7.5 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5994.7.5.1 Prototype Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5994.7.5.2 Direct Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5994.7.6 Delimitation to Non-Generative Manufacturing Processes . 6034.7.7 Names and Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605

5 Ordering and Operation of Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6075.1 Molds in the Offer Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607

F. Schlößer5.1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6075.1.2 The Planning of Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6085.1.2.1 Adjustment Process of Component and Mold . . . . . . . . . . . . . . 6085.1.2.2 Design of the Mold under Consideration of the Product

Life Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6095.1.2.3 Checklist for the Mold Specification . . . . . . . . . . . . . . . . . . . . . . 6115.1.3 Costing in Mold Making . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6135.1.3.1 Various Methods for Costing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6135.1.3.2 Simplified Costing in the Bidding and Design Phase . . . . . . . 6145.1.3.2.1 Estimated Value Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6145.1.3.2.2 Reference Value Methodology . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614

Page 30: Mold-Making Handbook€¦ · Handbook Günter Mennig Klaus Stoeckhert Hanser Publishers, Munich Hanser Publications, Cincinnati 3rd Edition. The Editors: Prof. Dr.-Ing. Günter Mennig,

XXIX Contents

5.1.3.2.3 Cost Element Methodology/Variable Costing . . . . . . . . . . . . . . 6165.1.3.2.4 Detail Calculations/Post-Calculations . . . . . . . . . . . . . . . . . . . . . 6185.1.4 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 621

5.2 Setup and Control of Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 622Ch. Bader5.2.1 Requirements for Effective Quality Assurance . . . . . . . . . . . . 6225.2.2 Mold Sensor Systems Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 6225.2.2.1 Mold Cavity Pressure Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . 6235.2.2.2 The Measuring Principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6235.2.2.3 Cavity Temperature Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6255.2.2.4 Sensor Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6255.2.2.5 Quick Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6265.2.3 Data Acquisition and Electronics . . . . . . . . . . . . . . . . . . . . . . . . . 6275.2.4 Setup and Optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6285.2.4.1 Cavity Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6285.2.4.2 The Importance of the Cavity Temperature Curve . . . . . . . . . 6315.2.4.3 Switchover to Holding Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . 6325.2.5 The Process Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6335.2.6 Factory-Wide Networking and Monitoring . . . . . . . . . . . . . . . . 6355.2.7 Real-Time Controls in the Injection Molding Process . . . . . . 6375.2.8 The Control of the Injection Molding Process . . . . . . . . . . . . . 6385.2.9 Outlook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 641

5.3 Wear on Injection Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 642T. Eulenstein, U. Hinzpeter5.3.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6425.3.2 Tribological Fundamentals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6425.3.3 Abrasion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6465.3.3.1 Forms of Damage on Molds and Hot Runners That Cause

Molded Part Defects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6465.3.3.2 Corrective Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6495.3.4 Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6495.3.4.1 Causes and Forms of Damage on Molds That Cause

Molded Part Defects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6515.3.4.2 Corrective Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6515.3.5 Abrasive Wear of Mold Elements . . . . . . . . . . . . . . . . . . . . . . . . . 6535.3.5.1 Types of Damage on Mold Elements . . . . . . . . . . . . . . . . . . . . . . 6535.3.5.2 Corrective Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6545.3.6 Outlook and Development Trends . . . . . . . . . . . . . . . . . . . . . . . . 658