MONTAGEANLEITUNG: AIR STREAM · 2020. 9. 4. · MONTAGEANLEITUNG: AIR STREAM Step 2 Step 3 Step 3...

2
MONTAGEANLEITUNG: AIR STREAM Step 2 Step 3 Step 3 Step 5 Step 5 Step 2 Step 3 Step 3 Step 3 Step 4 Step 4 Step 4 Step 4 Step 4 Step 5 Was Du zusätzlich für die Montage benötigst: 1. Teil : 8er Maulschlüssel, M5 Imbussschlüssel lang 2. Teil : 10er Maulschlüssel, M5 Imbussschlüssel lang 1. Teil (in Fahrtrichtung) rechts Step 1: Zuerst wird die Kunststoffabdeckung, die am oberen Rahmenteil befestigt ist, entfernt. Step 2: Einschubgummis entfernen Step 3: Zunächst wird eine Schraube entfernt (M5), diese wird direkt durch den Abstandsbolzen ersetzt. Das wird bei der zweiten Schraube wiederholt. Dabei ist es irrelevant welche der Schrauben zuerst ausgetauscht wird. Step 4: Der Abstandswinkel für das rechte Seitenteil wird mit der M5 Schraube am Rahmen befestigt. Step 5: Zum Schluss wird das Seitenblech mit allen Schrauben am Rahmen montiert. 2. Teil (in Fahrtrichtung) links Step 1: Auch hier wird die Kunststoffabdeckung zunächst entfernt Step 2: Einschubgummis entfernen Step 3: M6 Abstandsbolzen mittels einer M6 Mutter fixieren und festschrauben. Dieser Schritt wird an der zweiten Rahmenbefestigung wiederholt Step 4: Auch hier wird der Abstandswinkel am Rahmen befestigt Step 5: Zum Schluss wird das Seitenblech mit allen Schrauben am Rahmen montiert.

Transcript of MONTAGEANLEITUNG: AIR STREAM · 2020. 9. 4. · MONTAGEANLEITUNG: AIR STREAM Step 2 Step 3 Step 3...

Page 1: MONTAGEANLEITUNG: AIR STREAM · 2020. 9. 4. · MONTAGEANLEITUNG: AIR STREAM Step 2 Step 3 Step 3 Step 5 Step 5 Step 2 Step 3 Step 3 Step 3 Step 4 Step 4 Step 4 Step 4 Step 4 Step

MONTAGEANLEITUNG: AIR STREAM

Step 2 Step 3 Step 3

Step 5 Step 5

Step 2 Step 3 Step 3 Step 3

Step 4 Step 4

Step 4

Step 4 Step 4

Step 5

Was Du zusätzlich für die Montage benötigst: 1. Teil : 8er Maulschlüssel, M5 Imbussschlüssel lang 2. Teil : 10er Maulschlüssel, M5 Imbussschlüssel lang

1. Teil (in Fahrtrichtung) rechts

Step 1: Zuerst wird die Kunststoffabdeckung, die am oberen Rahmenteil befestigt ist, entfernt. Step 2: Einschubgummis entfernen Step 3: Zunächst wird eine Schraube entfernt (M5), diese wird direkt durch den Abstandsbolzen ersetzt. Das wird bei der zweiten Schraube wiederholt. Dabei ist es irrelevant welche der Schrauben zuerst ausgetauscht wird. Step 4: Der Abstandswinkel für das rechte Seitenteil wird mit der M5 Schraube am Rahmen befestigt. Step 5: Zum Schluss wird das Seitenblech mit allen Schrauben am Rahmen montiert.

2. Teil (in Fahrtrichtung) links

Step 1: Auch hier wird die Kunststoffabdeckung zunächst entfernt Step 2: Einschubgummis entfernen Step 3: M6 Abstandsbolzen mittels einer M6 Mutter fixieren und festschrauben. Dieser Schritt wird an der zweiten Rahmenbefestigung wiederholt Step 4: Auch hier wird der Abstandswinkel am Rahmen befestigt Step 5: Zum Schluss wird das Seitenblech mit allen Schrauben am Rahmen montiert.

Page 2: MONTAGEANLEITUNG: AIR STREAM · 2020. 9. 4. · MONTAGEANLEITUNG: AIR STREAM Step 2 Step 3 Step 3 Step 5 Step 5 Step 2 Step 3 Step 3 Step 3 Step 4 Step 4 Step 4 Step 4 Step 4 Step

ASSEMBLY INSTRUCTIONS: AIR STREAM

Step 2 Step 3 Step 3

Step 5 Step 5

Step 2 Step 3 Step 3 Step 3

Step 4 Step 4

Step 4

Step 4 Step 4

Step 5

What you aditionally need for the assembly: Part 1: An eight spanner, M5 long, allen key Part 2 : A ten spanner, M5 long, allen key

Part 1 (forward facing) right hand side

Step 1: First remove the plasticcover, which is located on the upper part of the frame. Step 2: Remove the insert rubbers. Step 3: In the first step the screw has to be removed with the M5 long-allen key, which directly is

going to be replaced with the distance bolt . This step has to be repeated with the other screw. In the process it is irrelevant which screw you start with.

Step 4: The distance angle for the right side panel is mounted on the frame with the M5 screw Step 5: Finally the side panel has to be mounted on the frame, using the designated screws.

2. Teil (in Fahrtrichtung) links

Step 1: Here aswell, the plasticcover has to be removed Step 2: Remove the insert rubbers. Step 3: Fixate the distance bolts using a M6 nut and screw it down. This step has to be repeated

on the second frame attachement. Step 4: The distance angle has to be mounted on the frame here aswell Step 5: Finally the side panel has to be mounted on the frame, using the designated screws.