NEWSLETTER - Parkettfreund Die neuen TK-Profile sind speziell für Designbelägen entwickelt worden:...
Transcript of NEWSLETTER - Parkettfreund Die neuen TK-Profile sind speziell für Designbelägen entwickelt worden:...
NEWSLETTER
2018NewsletterProgramm-Neuheiten Product novelties
www.parkettfreund.com
BASIS-Profil 4.0
40Ver
leg
e-vi
deo
Einzigartiges BASIS-Profil 4.0 Unique BASE profile 4.0
COMBI mit neuem BASIS-ProfilCOMBI with new BASE Profil
u drei Verstellnuten und Sollbiegestelle
u 40 mm breites BASIS-Profil für seitlich versetzte Befestigung oder größere Klebeauftragsfläche
u Höhenausgleich mit dem Übergang von 5 mm oder bis zu 8 mm durch mechanische Anpassung
u einsetzbar von 6,5 - 16 mm, optional zusätzlich 2 mm
u Verlegevideo und praktischer Musteraufsteller verfügbar
u three flex grooves and pre-determined bending point to tilt
u 40 mm wide BASE Profile allows a laterally offset drilling to the screed joint or a wider adhesive surface
u with the connecting profile, wood floor coverings with a difference in height from 5 mm to 8 mm can be installed through mechanical adaptations
u expanded application area on 6.5 - 16 mm, optional additional 2 mm
u installation video and practical sample board available
Combi+/Combi
PF 886
PF 886, silberUB Acoustic Allrounder
PF 286, edelstahlUB Acoustic Allrounder
+ 5 mm
+ 10 mm
90 / 100 / 270 cm
7-23 mm min. 0 mm
max. 22 mm
37 mm
7-17 mm
min. 3
max. 22 mm
6,5-16 mm
6,5-16 mm
6,5-16 mm6,5-16 mm
2x 14 mm
14 mm
2x 12,5 mm
12,5 mm
19 mm 12 mm
www.parkettfreund.com
PF 286
PF 888
PF 287 NB
u Combi+-Profile mit Präzisionsgelenk und schwenkbarem Top-Profil
• PF 888 ist Übergangs- und Ausgleichsprofil in einem System – Höhenunterschiede bis 12 mm
u Schlanke und optimale Unterkonstruktion
• ausreichende Dehnfugen
u Flache Top-Profile
• kein Abhobeln des Türblattes nötig und angenehmes Begehen
u Combi+-Profiles with pivot base for a height leveling top profile
• PF 888 is suitable for flooring of the same height as well as for height differences of up to 12 mm
u Lean and optimal base
• adequate expanding joints
u Flat top profiles • no planing of door panel necessary and no tripping hazard
u Seuil Combi+ avec charnière de précision et seuil de recouvrement pivotable
• PF 888 est seuil de raccordement et adaptation dans un seul systéme avec des différences d‘épaisseur jusqu‘à 12mm
u La sous-construction mince et optimale
• joint suffisant de dilatation
u Seuils de recouvrement plat
• pas de rabotage de la porte et marche agréable
PF 888, bronzeUB Acoustic Allrounder
PF 288, sandUB Acoustic Allrounder
PF 287 NB, goldUB Acoustic Allrounder
PF 287, poliertUB Acoustic Allrounder
PF 287
PF 288
Lift-up-block
Co
mb
i+C
om
bi
Internationaler Patentschutz
Internationally Patented
51
37
28
47
44
34
22
40
40
40
PF 286 6,5-16 mm
Länge Length (m) 0,90 | 1,00 | 2,70 | 3,00
10 mm
PF 288 6,5-16 mm
2x 10 mm
PF 287 6,5-16 mm
10 mm
PF 289 6,5-16 mm
2x 10 mm
glatte Oberfläche
plain surface
Farben Colours F2 | F3 | F4 | F5 | F6 | F9
Länge Length (m) 0,90 | 1,00 | 2,70 | 3,00
Farben Colours F2 | F3 | F4 | F5 | F6 | F9
Länge Length (m) 0,90 | 1,00 | 2,70 | 3,00
Farben Colours F2 | F3 | F4 | F5 | F6 | F9
Länge Length (m) 0,90 | 1,00 | 2,70 | 3,00
Farben Colours F2G | F3 | F4 | F9
„Runde“ Treppenkanten "Rounded" stair nosing
Treppenkantenprofile mit „runden“ Eckelementen Ready-made corners with "rounded" edges
aus Alumnium für die sichere Treppenverlegung:
u zeitsparend, da keine aufwendigen Gehrungsschnitte auf der Baustelle notwendig sind
u offene Treppen barfuß begehbar, da scharfkantige Ecken entfallen
u durch Schenkellängen von 100 und 150 cm – komplette Stufenverlegung möglich
u für elastische und textile Bodenbeläge bis zu 3,0 mm
made of aluminium for save stair nosing solution:
u time-saving, as no laborious miter cuts have to be made on site
u open stairs can be walked on barefoot, as there are no sharp-edged corners
u now available in lengths of 100 and 150 cm – complete stair coverage possible
u for resilient floor coverings up to 3.0 mm
u best for thermal baths, saunas, spas or the private living area
39
29
2,5
PF 870
39
29
3
PF 871
Runde Ecke · Rounded edge Runde linke Ecke · Rounded left edge Runde rechte Ecke · Rounded right edge
Version EC
Länge Length (m) 0,3 x 0,3 x 0,2
Runde Ecke mit Verbinder Rounded edge with Connector
Länge Length (m) 0,3 x 1,0 x 0,2 | 0,3 x 1,5 x 0,2
Runde linke Ecke mit Verbinder Rounded left edge with Connector
Länge Length (m) 1,0 x 0,3 x 0,2 · 1,5 x 0,3 x 0,2 m
Runde rechte Ecke mit Verbinder Rounded right edge with Connector
Version EV
PF 859
Länge Length (m) 1,00 | 2,50
Eckelement für 870 und 871 · Ready-made corners for 870 & 871
Eckelement für 859, 860 und 862 Ready-made corners for 859, 860 und 862
Optimal für Thermen, Saunalandschaften oder denprivaten Wohnbereich geeignet
Best for thermal baths saunas, spas or the private living area
PF 860 PF 862
Länge Length (m) 1,00 | 2,50
Farben Colours F4
Länge Length (m) 0,3 x 0,3
Farben Colours F4
Länge Length (m) 0,3 x 1,0 | 0,3 x 1,5
Farben Colours F4
Länge Length (m) 1,0 x 0,3 | 1,5 x 0,3
Farben Colours F4
Länge Length (m) 1,00 | 2,50
Farben Colours F4
Farben Colours F4
Farben Colours F4
Farben Colours F4
= Sollbiegestelle predetermined bending point
Farben Colours F4
Länge Length (m) 1,00 | 2,50
Farben Colours F4
Länge Length (m) 1,00 | 2,50
Farben Colours F4
Runde Ecke · Rounded edge Runde linke Ecke · Rounded left edge Runde rechte Ecke · Rounded right edge
Länge Length (m) 0,3 x 0,3
Farben Colours F4
Länge Length (m) 0,3 x 1,0 m | 0,3 x 1,5
Farben Colours F4
Länge Length (m) 1,0 x 0,3 | 1,5 x 0,3
Farben Colours F4
Version EC-L Version EC-R
Version EV-L Version EV-R
Version EC Version EC-L Version EC-R
Neue Universal-Profile New universal profiles
11
8
17
5
3,535
,5-5
6
PF 844 / 844 WS
Länge Length (m) 3,00
8
14
5
3
56
PF 846
Länge Length (m) 3,00
Die neuen TK-Profile sind speziell für Designbelägen entwickelt worden:The newly developed TK profiles are specially for LVT:
u Treppenkante aus Aluminium mit bis zu 3,5 mm Einschub oder für Beläge bis 5 mm
u zur nachträglichen Abdeckung der Stufenvorderkante
u Dekorgleichheit durch Einsetzen des gleichen Bodenbelags oder optischer Kontrast möglich
u Version PF 844 WS (wasserstrahlgeschnitten) ermöglicht einen variablen Höhenbereich von 35,5 - 56 mm
u die Versionen PF 844 und PF 844 WS sind für die Verkleidung von offenen Treppen geeignet
u eine Verklebung von Bodenbelägen auf der Unterseite von Treppen ist mit dieser Profillösung ebenfalls möglich
u stair edge made of aluminum with up to 3 mm and 3.5 mm insert or for coverings up to 5 mm
u for subsequent covering of the front edge of the step
u decor matching or contrast on stair nosings with the same or different coverings
u version PF 844 WS (water jet cut) allows a variable height range of 35.5 - 56 mm
u the versions PF 844 and PF 844 WS are suitable for the covering of open stairs
u a bonding of floor coverings on the underside of stairs is also possible with this profile solution
14,525
12,5
PF 323 G
Länge Length (m) 2,70
67
29,5
19
PF 715
Länge Length (m) 3,00
PF 2511 / 19
Länge Length 18,3 m Rolle/Roll
Neues Dehnfugenprofil PF 323 GNew expansion joint profile PF 323 G u für LVT und Designbeläge bis zu 12,5 mm
u ± 3,0 mm Bewegungsmöglichkeit flächenbündige Verlegung
u unser Treppenkantenprofil PF 715 – für zwei Gleitschutzeinlagen geeignet
u Gleitschutzeinlage PF 2511/19 mit Minalkörnung in schwarz hat die höchstmöglich rutschhemmende Wirkung (Rutschfaktor R13)
u for LVT and design floor coverings with up to 12.5 mm
u our stair nosing profile PF 715 – available for two slip-resistant inserts
u ± 3.0 mm finish installation with movement possibility
u slip-resitant insert mineral granulation PF 2511/19 in black with the maximum non skid effect (slide factor R13)
± 3,0 mm
19 mm
Farben Colours F2 | F4
Farben Colours F2 | F4
Farben Colours F2 | F4
Farben Colours F2 | F4
Farben Colours GM7 Mineral schwarz
F2 Aluminium edelstahloptik aluminium stainless steel optic
F2G Aluminium edelstahloptik fein geschliffen aluminium stainless steel optic fine grinded
F3 Aluminium poliert aluminium polished
F4 Aluminium silber aluminium silver
F5 Aluminium gold aluminium gold
F6 Aluminium bronze aluminium bronze
F9 Aluminium sand aluminium sand
EC 90°-Ecke 90° corner
EV 90°-Ecke mit Verbinder 90° corner with connector
S Sollbiegestelle predetermined bending point
SGH Metall- und Kunststoff-Technologie GmbH
Everinghauser Heide 1 58579 SchalksmühleGermany
Telefon: +49 (0) 2351 67090 - 0Telefax: +49 (0) 2351 67090 - 570 info@ parkettfreund.com ©
Par
kett
freu
nd
01-
2018
www.parkettfreund.com
Profile-Finderwww.parkettfreund.com
Neue Universal-Profile New universal profiles