8/17/2019 Nt Continental Sid208 Irom Tc1797 Ford Landrover 1033

1/3

NT_CONTINENTAL_SID208_IROM_TC1797_FORD_LANDROVER  VER 02.02

Dimensione Sport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 955 201 – WEB : www.dimsport.com- 1 - 

PLUGIN 510 :NEW TRASDATA

On this ECU ONLY the DIRECT CONNECTION is possible.

8/17/2019 Nt Continental Sid208 Irom Tc1797 Ford Landrover 1033

2/3

NT_CONTINENTAL_SID208_IROM_TC1797_FORD_LANDROVER  VER 02.02

Dimensione Sport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 955 201 – WEB : www.dimsport.com- 2 - 

ECU CONNECTOR

In order to connect to the ECU use the CABLE F32GN037C.

Make sure that the POWER led (red) on NEW TRASDATA is ON.

WARNING: 

due to the relevant power absorbed by the ECU

at the beginning of the communication proceduresthe power supply of the kit could not be enough

and the New Trasdata is not able to identify the ECU.

In these cases it is necessary to feed the ECU with a

booster or an additional battery. The ECU must be

fed through the NEW TRASDATA, connect the

F32GN003 power cable to the NEW TRASDATA and

the crocodile side to the power source.

8/17/2019 Nt Continental Sid208 Irom Tc1797 Ford Landrover 1033

3/3

NT_CONTINENTAL_SID208_IROM_TC1797_FORD_LANDROVER  VER 02.02

Dimensione Sport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 955 201 – WEB : www.dimsport.com- 3 - 

POL4&POL5 CONNECTION 

Connect the BLUE and GREY wires of the cable F32GN037C as described here below :