Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID A1

Skill Number 07 Skill CNC Milling Competition Day 1

Competitor No Competitor Name Member

Sub Criterion Main Dimensions for Project 1

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded

1 0.50 Breite D-5 95 (+0.03/0)

PROJECT 1

2 0.50 Höhe C-6 94 (0/-0.03)

3 0.50 Breite Nase oben links D-6 31 (0/-0.03)

4 0.50 Breite Nase oben rechts D-4 31 (0/-0.03)

5 0.50 Breite Nase unten links B-6 30 (+0.03/0)

6 0.50 Breite Nase unten rechts B-4 30 (+0.03/0)

7 0.50 Ring aussen C-4 85 (0/-0.03)

8 0.50 Tasche C-4 75 (+0.1/0)

9 0.25 Abstand Loch Ø 10H7 links C-6 38 (0/-0.04)

10 0.25 Abstand Loch Ø 10H7 links D-5 38.5(0/-0.04)

11 0.25 Abstand Loch Ø 10H7 rechts B-5 38.5 (+0.04/0)

12 0.25 Abstand Loch Ø 10H7 rechts C-4 38 (+0.04/0)

13 0.50 Insel 90° D-5 11 (+0.05/+0.02)

14 0.50 Insel 90° Innenmass D-5 7 (+0.03/0)

15 0.25 Abstand D-3 18(0/-0.04)

16 0.25 Tiefe D-3 12 (0/-0.02)

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 1 / 3 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID A1

Skill Number 07 Skill CNC Milling Competition Day 1

Competitor No Competitor Name Member

Sub Criterion Main Dimensions for Project 1

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded

17 0.25 Tiefe D-3 5 (+0.04/0)

18 0.25 Tiefe D-3 2 (+0.03/0)

19 0.25 Tiefe B-3 10 (0/-0.02)

20 0.25 Tiefe B-3 6 (-0.01/-0.04)

21 0.38 Bohrung C-4 20H7 (+0.021/0)

22 0.38 Bohrung C-3 14H7 (+0.018/0)

23 0.63 Gewinde Qualität C-4 M30x1.5

24 0.25 Bohrung oben rechts D-6 10H7 (+0.015/0)

25 0.25 Bohrung unten Links C-5 10H7 (+0.015/0)

26 0.38 Parallelität Fläche Gewindeseite A-A // 0.02A

27 0.38 Parallelität Fläche Taschenseite A-A // 0.02A

28 0.19 Tasche links oben x D-2 30 (+0.08/+0.04)

29 0.19 Tasche links oben Y D-1 30 (-0.04/-0.08)

30 0.19 Tasche links oben D-2 25 (+0.04/0)

31 0.19 Tasche rechts oben x D-1 30 (+0.08/+0.04)

32 0.19 Tasche rechts oben y D-1 30 (-0.04/-0.08)

33 0.18 Tasche rechts oben D-1 25 (+0.04/0)

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 2 / 3 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID A1

Skill Number 07 Skill CNC Milling Competition Day 1

Competitor No Competitor Name Member

Sub Criterion Main Dimensions for Project 1

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded12.50

34 0.18 Tasche unten links x C-2 30 (+0.04/0)

35 0.18 Tasche unten links y C-2 30(0/-0.04)

36 0.25 Tasche unten links C-2 25 (+0.02/0)

37 0.18 Tasche unten rechts x C-1 30 (+0.04/0)

38 0.18 Tasche unten rechts C-1 30 (0/-0.04)

39 0.25 Tasche unten rechts C-1 25 (+0.02/0)

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 3 / 3 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID A2

Skill Number 07 Skill CNC Milling Competition Day 2

Competitor No Competitor Name Member

Sub Criterion Main Dimensions for Project 2

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded

40 0.17 Höhe 146 (0/-0.04)

PROJECT 2

41 0.17 Breite 96 (+0.04/0)

42 0.50 Breite Nase 50 (+0.04/0)

43 0.30 Zapfen 4 Kant Breite 20(0/-0.04)

44 0.30 Zapfen 4 Kant Höhe 20 (+0.04/0)

45 0.50 Nute links 12(0/-0.04)

46 0.50 Nute rechts 12(0/-0.04)

47 0.18 Taschen Breite 50 (+0.04/0)

48 0.50 Distanz 45 (+0.04/0)

49 0.50 Tasche Ø 22 / 15 22 (+0.021/0)

50 0.50 Tasche Ø 22 22 (+0.021/0)

51 0.50 Breite 25 (+0.04/0)

52 0.50 Distanz 22(0/-0.04)

53 0.50 Tiefe 8 (+0.04/0)

54 0.50 Tiefe 15(0/-0.04)

55 0.50 Tiefe 3 (+0.04/0)

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 1 / 2 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID A2

Skill Number 07 Skill CNC Milling Competition Day 2

Competitor No Competitor Name Member

Sub Criterion Main Dimensions for Project 2

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded12.50

56 0.50 Bohrung 40 (+0.025/0)

57 0.50 Bohrung 12 (+0.018/0)

58 0.70 Qualität Gewinde M30x1.5

59 0.50 Taschen Breite 72 (+0.04/0)

60 0.50 Taschen Höhe 53(0/-0.04)

61 0.50 Distanz 61 (+0.04/0)

62 0.50 Bohrung 20 (+0.021/0)

63 0.18 Nute 10 (+0.04/0)

64 0.50 Nuten Tiefe 8 (+0.03/0)

65 0.50 Tiefe 6 (+0.04/0)

66 0.50 Distanz 30 (+0.02/-0.02)

67 0.50 Distanz 25 (+0.02/-0.02)

PROJECT 2

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 2 / 2 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID A3

Skill Number 07 Skill CNC Milling Competition Day 3

Competitor No Competitor Name Member

Sub Criterion Main Dimensions for Project 3

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded

68 0.25 Länge E-7 145 (+0.04/0)

PROJECT 3

69 0.25 Breite D-5 95 (+0.01/-0.03)

70 0.25 Tasche E-7 115 (+0.08/+0.04)

71 0.25 Tasche D-8 70 (0/-0.04)

72 0.50 Nute D-5 10 (+0.04/0)

73 0.50 Nase D-5 20 (+0.04/0)

74 0.25 Breite E-4 37.5 (-0.03/-0.07)

75 0.25 Tiefe E-4 17.5 (+0.05/0)

76 0.25 Tiefe E-4 15 (+0.05/0)

77 0.75 Bohrung Ø 10H7 (15) E-4 10 (+0.015/0)

78 0.75 Bohrung Ø 10H7 (17) D-4 10 (+0.015/0)

79 0.50 Qualität Gewinde D-4 M10

80 0.50 Abstand E-3 10 (+0.03/-0.01)

81 0.25 Abstand E-2 53 (+0.04/0)

82 0.25 Distanz C-2 67.5 (+0.04/0)

83 0.25 Taschen Distanz D-2 40 (+0.03/-0.01)

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 1 / 2 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID A3

Skill Number 07 Skill CNC Milling Competition Day 3

Competitor No Competitor Name Member

Sub Criterion Main Dimensions for Project 3

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded12.50

84 0.50 Taschen Breite D-2 20 (+0.08/+0.04)

85 0.50 Taschen Höhe D-2 35 (+0.08/+0.04)

86 0.50 Taschen Durchgang D-3 24 (+0.03/0)

87 0.50 Distanz Durchgang D-3 27.5 (+0.01/-0.03)

88 0.50 Distanz Tasche D-2 10 (0/-0.04)

89 0.75 Nute E-2 13 (+0.04/0)

90 0.50 Abstand Tasche E-2 30 (0/-0.04)

91 0.50 Durchmesser Zapfen C-6 14 (-0.02/-0.06)

92 0.25 Taschentiefe C-6 5 (+0.05/+0.01)

93 0.25 Tiefe Insel B-6 5 (+0.05/+0.01)

94 0.75 Qualität Gewinde x (15) B-7 M30 x 1.5

95 0.50 Parallel // A C-4 // A

96 0.50 Parallel // A A-6 // A

PROJECT 3

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 2 / 2 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID A4

Skill Number 07 Skill CNC Milling Competition Day 4

Competitor No Competitor Name Member

Sub Criterion Main Dimensions for Project 4

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded

97 0.25 Höhe D-6 144 (+0.04/0)

PROJECT 4

98 0.25 Breite C-3 95 (0/-0.04)

99 0.25 Dicke F-5 47 (+0.04/0)

100 0.50 Tasche 6Kt E-6 78 (+0.04/0)

101 0.25 Breite D-7 71 (+0.02/-0.02)

102 1.00 Breite Kreuz 4x E-7 14 (0/-0.03)

103 0.37 Nute E-8 8 (+0.02/0)

104 0.25 Distanz Ø12 C-7 65 (+0.02/-0.02)

105 0.50 Tasche E-6 40 (+0.025/0)

106 0.38 Bohrung links D-5 12 (+0.018/0)

107 0.37 Bohrung rechts D-5 12 (+0.018/0)

108 0.25 Tiefe C-5 16 (+0.03/-0.01)

109 0.25 Distanz Ø 20 D-4 113 (+0.02/-0.02)

110 0.50 Insel C-3 85 (+0.03/-0.01)

111 0.38 Taschenbreite E-3 75 (+0.04/0)

112 0.25 Distanz E-2 5 (+0.02/-0.02)

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 1 / 3 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID A4

Skill Number 07 Skill CNC Milling Competition Day 4

Competitor No Competitor Name Member

Sub Criterion Main Dimensions for Project 4

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded

113 0.50 Zapfen Ø F-3 18 (0/-0.018)

114 0.25 Taschenhöhe D-2 120 (+0.02/-0.02)

115 0.25 Tiefe D-1 11 (+0.03/0)

116 0.25 Tiefe E-1 10 (+0.03/0)

117 0.50 Durchmesser E-1 20 (+0.021/0)

118 0.37 Breite A-7 91 (0/-0.03)

119 0.38 Tasche B-7 31 (+0.03/-0.01)

120 0.37 Tasche B-7 19 (+0.03/0)

121 0.25 Nute C-8 10 (+0.03/0)

122 0.38 Bohrung C-6 10 (+0.015/0)

123 0.37 Bohrung B-5 20 (+0.021/0)

124 0.25 Tiefe B-5 15 (+0.04/+0.01)

125 0.25 Tiefe A-5 15 (+0.04/+0.01)

126 0.25 Tiefe A-5 10 (+0.03/+0.01)

127 0.50 Durchmesser A-5 48 (+0.025/0)

128 0.75 Qualität Gewinde A-6 M42X1.5

129 0.38 Parallel // A F-5 // 0.03A

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 2 / 3 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID A4

Skill Number 07 Skill CNC Milling Competition Day 4

Competitor No Competitor Name Member

Sub Criterion Main Dimensions for Project 4

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded12.50

130 0.12 Winkel ? B E-4 0.03 B

131 0.13 Winkel ? B E-2 0.03 B

PROJECT 4

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 3 / 3 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID B1

Skill Number 07 Skill CNC Milling Competition Day 1

Competitor No Competitor Name Member

Sub Criterion Secundary Dimension for Project 1

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded

1 0.38 Gewinde Koordinate links D-4 38

PROJECT 1

2 0.38 Gewinde Koordinate links D-5 38.5

3 0.38 Gewinde Koordinate rechts C-6 38

4 0.38 Gewinde Koordinate rechts B-5 38.5

5 0.38 Distanz Nute C-5 14

6 0.38 Länge Nute C-5 11

7 0.40 Tiefe 20H7 A-A 16

8 0.40 Distanz C-2 29

9 0.40 Distanz C-2 28

10 0.40 Durchmesser D-2 86

11 0.26 Taschenradius links oben 6x D-2 R5

12 0.27 Taschenradius links unten 6x C-2 R5

13 0.27 Taschenradius rechts unten 6x D-1 R5

14 0.27 Taschenradius rechts oben 6x C-1 R5

15 0.40 kontarradius C-5 R9

16 0.45 Breite oben B-5 95

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 1 / 2 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID B1

Skill Number 07 Skill CNC Milling Competition Day 1

Competitor No Competitor Name Member

Sub Criterion Secundary Dimension for Project 1

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded6.25

17 0.45 Hohe rechts C-4 94

PROJECT 1

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 2 / 2 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID B2

Skill Number 07 Skill CNC Milling Competition Day 2

Competitor No Competitor Name Member

Sub Criterion Secundary Dimension for Project 2

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded

18 0.35 Distanz Bohrung Ø 40 101

PROJECT 2

19 0.35 Distanz Bohrung Ø 12 68

20 0.35 Distanz Nuten 75

21 0.35 Tiefe Nute 10 5

22 0.35 Tiefe Nase links 20

23 0.35 Tiefe Nase rechts 20

24 0.35 Radius Konvex 6x R5

25 0.35 Radius Konkav R5

26 0.30 Tiefe Sitz Ø 12 14 (+0.5/0)

27 0.35 Lochdistanz 66

28 0.35 Distanz Gewinde M30x1.5 25

29 0.35 Distanz Ø 20 37

30 0.35 Distanz Gewinde M10 37

31 0.35 Taschen Rand 73.5

32 0.35 Tiefe Tasche 15

33 0.35 Tiefe Tasche 10

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 1 / 2 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID B2

Skill Number 07 Skill CNC Milling Competition Day 2

Competitor No Competitor Name Member

Sub Criterion Secundary Dimension for Project 2

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded6.25

34 0.35 Distanz zentrum 12.5

35 0.35 Ansenkung 0.5x45°

PROJECT 2

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 2 / 2 12-12-2007 15:47:05

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID B3

Skill Number 07 Skill CNC Milling Competition Day 3

Competitor No Competitor Name Member

Sub Criterion Secundary Dimension for Project 3

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded

36 0.25 Distanz Ø 10 C-6 10

PROJECT 3

37 0.25 Distanz Ø 10 D-5 12.5

38 0.25 Distanz Ø 10 C-7 120

39 0.25 Distanz Ø 10 E-8 30

40 0.25 Abstand D-5 35

41 0.12 Distanz D-6 20

42 0.13 Distanz D-7 47.5

43 0.25 Distanz M10 D-6 42.5

44 0.25 Distanz M10 D-1 22.5

45 0.25 Tiefe E-4 12.5

46 0.25 Gewindetiefe D-4 10 (+2/0)

47 0.25 Bohrungstiefe 10 H7 (Tasche) D-4 15 (+0.5/0)

48 0.25 Bohrungstiefe 10 H7 (Gewindeseite) D-4 17 (+0.5/0)

49 0.12 Distanz E-3 34

50 0.13 Distanz E-3 24

51 0.12 Distanz E-2 30

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 1 / 2 12-12-2007 15:47:06

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID B3

Skill Number 07 Skill CNC Milling Competition Day 3

Competitor No Competitor Name Member

Sub Criterion Secundary Dimension for Project 3

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded6.25

52 0.13 Abstand E-1 22.5

53 0.12 Abstand D-1 5

54 0.25 Tiefe B-8 2

55 0.25 Tiefe B-6 7.5

56 0.25 Taschen Radius 2x D-7 R 25

57 0.25 Taschen Radius 2x D-6 R 20

58 0.25 Radius Kontur Aussen 3x E-8 R 20

59 0.25 Radius Kontur Insel 3x E-8 R 17.5

60 0.25 Radius Tasche Konkav 2x E-3 R 12

61 0.25 Radius Tasche Konkav E-2 R 20

62 0.25 Insel D-8 90

63 0.25 Insel C-7 140

64 0.13 Zapfen Tiefe C-6 7.5

PROJECT 3

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 2 / 2 12-12-2007 15:47:06

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID B4

Skill Number 07 Skill CNC Milling Competition Day 4

Competitor No Competitor Name Member

Sub Criterion Secundary Dimension for Project 4

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded

65 0.19 Distanz D-8 94

PROJECT 4

66 0.19 Abstand D-7 12

67 0.19 Laenge Nute E-7 15

68 0.19 Tiefe Nute E-7 4

69 0.31 Radius 2x D-7 R 13

70 0.30 Taschen Radius 6x E-7 R 15

71 0.19 Durchmesser Kreuz E-7 50

72 0.19 Tiefe Tasche C-7 2.5

73 0.19 Tiefe E-5 10

74 0.19 Tiefe Ø 12 C-5 15

75 0.31 Höhe D-4 27.5

76 0.19 Höhe D-4 79.5

77 0.19 Wandstärke D-3 5

78 0.19 Distanz E-3 24

79 0.19 Distanz E-4 38

80 0.19 Tiefe F-4 8

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 1 / 2 12-12-2007 15:47:06

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID B4

Skill Number 07 Skill CNC Milling Competition Day 4

Competitor No Competitor Name Member

Sub Criterion Secundary Dimension for Project 4

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded6.25

81 0.31 Länge Tasche B-7 50

82 0.31 Länge TascheB-7 38

83 0.31 Distanz B-7 38

84 0.31 Distanz B-7 15

85 0.31 Distanz B-6 18.5

86 0.31 Radius 2x C-7 R 5

87 0.31 Abstand B-7 3

88 0.31 Tiefe Bohrung Ø 10 C-6 12

89 0.19 Tiefe B-5 15

90 0.19 Tiefe Tasche C-7 5.5

PROJECT 4

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 2 / 2 12-12-2007 15:47:06

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID C1

Skill Number 07 Skill CNC Milling Competition Day 1

Competitor No Competitor Name Member

Sub Criterion Surface Quality for Project 1

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded2.00

1 0.25 Insel Ra 0.8

PROJECT 1

2 0.25 Fläche Tasche Ra 0.8

3 0.25 Bohrung 20H7 A-A Ra 0.8

4 0.25 Fläche Gewindeseite Ra 0.8

5 0.50 Bohrung 10H7 x2 A-A Ra 0.8

6 0.25 Bohrung 14H7 A-A Ra 0.8

7 0.13 Fläche Basis A Ra 0.8

8 0.12 Oberflächengüte allgemein Ra 1.6

PROJECT 1

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 1 / 1 12-12-2007 15:47:06

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID C2

Skill Number 07 Skill CNC Milling Competition Day 2

Competitor No Competitor Name Member

Sub Criterion Surface Quality for Project 2

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded2.00

9 0.20 Zapfen 20x20 Ra 0.8

PROJECT 2

10 0.20 Tasche 50 Ra 0.8

11 0.20 Bohrung Ø 40 Ra 0.8

12 0.20 Bohrung Ø 12 Ra 0.8

13 0.20 Taschentiefe 6 Boden Ra 0.8

14 0.18 Taschentiefe 15 Boden Ra 0.8

15 0.18 Tasche 72x53 Ra 0.8

16 0.18 Bohrung Ø 20 Ra 0.8

17 0.18 Seite 61x96 Ra 0.8

18 0.18 Fläche Zapfenseite Ra 0.8

19 0.10 Bearbeitung Allgemein Ra 1.6

PROJECT 2

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 1 / 1 12-12-2007 15:47:06

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID C3

Skill Number 07 Skill CNC Milling Competition Day 3

Competitor No Competitor Name Member

Sub Criterion Surface Quality for Project 3

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded2.00

20 0.50 Fläche Zapfenseite B-7 Ra 0.8

PROJECT 3

21 0.50 Fläche Gewindeseite E-4 Ra 0.8

22 0.50 Bohrung Ø 10H7 x15 D-5 Ra 0.8

23 0.40 Bohrung Ø 10H7 x 17 D-4 Ra 0.8

24 0.10 Allgemeine Bearbeitung Ra 1.6

PROJECT 3

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 1 / 1 12-12-2007 15:47:06

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID C4

Skill Number 07 Skill CNC Milling Competition Day 4

Competitor No Competitor Name Member

Sub Criterion Surface Quality for Project 4

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded2.00

25 0.25 Oberfläche Insel D-5 Ra 0.8

PROJECT 4

26 0.25 Fläche Basis A E-5 Ra 0.8

27 0.25 Fläche C-5 Ra 0.8

28 0.25 Bohrung Ø 12 D-5 Ra 0.8

29 0.25 Bohrung Ø 10 C-5 Ra 0.8

30 0.25 Bohrung Ø 20 C-5 Ra 0.8

31 0.25 Bohrung Ø 48 A-5 Ra 0.8

32 0.25 Allgemeine Bearbeitungsangaben Ra 1.6

PROJECT 4

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 1 / 1 12-12-2007 15:47:06

Form 5

Objective Marking FormWorldSkills Competition 2007

Sub Criterion ID E1

Skill Number 07 Skill CNC Milling Competition Day 4

Competitor No Competitor Name Member

Sub Criterion No additional material used

AspectID

MaxMark

Aspect of Criterion - Description Requirement orNominal Size

Result or ActualValue

MarkAwarded

Maximum Mark for Sub Criterion Mark Awarded5.00

1 1.25 Kein Zusatzmaterial benötigt

PROJECT 1

2 1.25 KeinZusatzmaterial benötigt

PROJECT 2

3 1.25 KeinZusatzmaterial benötigt

PROJECT 3

4 1.25 KeinZusatzmaterial benötigt

PROJECT 4

Signatures confirming the accuracy of this printed result

Compatriot or Independent Expert Chief Expert

Date and Time

Mark Awarded is the Max Mark minus anyspecified deductions for difference between

Requirement and Result

Page 1 / 1 12-12-2007 15:47:06