Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung (30.04.02) Arbeitspaket 3...
-
Upload
lisa-michel -
Category
Documents
-
view
215 -
download
2
Transcript of Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung (30.04.02) Arbeitspaket 3...
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH3. Arbeitssitzung (30.04.02)
Arbeitspaket 3
Lightweight Cylinder of
Alternative Design
Lingk & Sturzebecher Leichtbau GmbH
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH3. Arbeitssitzung (30.04.02)
Introduction
Relationship between Cylinder Manufacturing Cost and Weight and the Market Potential
Proposed Alternative Lightweight Cylinder Design
Delivery Pipes from Composite
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH3. Arbeitssitzung (30.04.02)
Hydraulic Cylinders - Manufacturing Cost versus Weight
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH3. Arbeitssitzung (30.04.02)
Proposed Alternative Design Cutdown Steel Barrel, Wrapped with CFRP, Suitable for M38B
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH3. Arbeitssitzung (30.04.02)
Comparison Between Designs
Standard Steel Design Mass: 300 kg Relative Cost: 1
Proposed Alternative (for M38B, Cut-down Barrel & CFRP-Wrapped) Mass: 251 kg Relative Cost: ?
Current Lightweight Design (for M38B, CFRP/Liner/Tie-Rod design) Mass: 184 kg Relative Cost: 2...5
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH3. Arbeitssitzung (30.04.02)
Cylinder Stress Analysis Coarse Meshed Model
Meshed Model
Von Mises Stress [MPa]
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH3. Arbeitssitzung (30.04.02)
Cylinder Stress Analysis Fine Meshed (Sub-) Model
Region to be Sub-Modelled
Mesh of Sub-Modelled Region
Von Mises Stress in Sub-Modelled Region [MPa]
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH3. Arbeitssitzung (30.04.02)
Cylinder Stress Analysis Analytical and Numerical
Analytical
Numerical (FEM)
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH3. Arbeitssitzung (30.04.02)
Cylinder Manufacturing Options
Thin-walled tube and welded thicker end region
Thick-walled tube and turned down to required thickness
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH3. Arbeitssitzung (30.04.02)
Delivery Pipes from Composite