Sanyo Hip-205 200nkhb5
-
Upload
solarshop-australia -
Category
Documents
-
view
221 -
download
0
Transcript of Sanyo Hip-205 200nkhb5
8/8/2019 Sanyo Hip-205 200nkhb5
http://slidepdf.com/reader/full/sanyo-hip-205-200nkhb5 1/2
HIP-205NKHB5
HIP-200NKHB5
18.4%
18.0%
16.0%
15.6%
HIP-205NKHB5
HIP-200NKHB5
HIT photovoltaic module
The HIT cell and module have very high
conversion efficiency in mass production.
Benefit in Terms of Performance
Model Cell Efficiency Module Efficiency
The SANYO HIT ( Heterojunction with Intrinsic Thin layer) solar cell is made of a thin mono
crystalline silicon wafer surrounded by ultra-thin amorphous silicon layers. This product provides
the industry's leading performance and value using state-of-the-art manufacturing techniques.
HIT Solar Cell Structure
nRear-sideelectrode
Front-sideelectrode
Development of HIT solar cell was supported in part
by the New Energy and Industrial Technology
Development Organization (NEDO).
Thin mono
crystalline
silicon wafer
Ultra-thin amorphous silicon layer
Ultra-thin amorphous silicon layer
High performance at high temperatures
Environmentally-Friendly Solar Cell
HIT can generate more clean Energy than other
conventional crystalline solar cells.
Even at high temperatures, the HIT solar cell can
maintain higher efficiency than a conventional
crystalline silicon solar cell.
More Clean Energy
n o r m a l i z e d o u t p u t p o w
e r
[Changes in generated power daytime]
HIT
c-Si
time
approx.10%up
Module temp.7 5℃
Kobe (Japan), 24. July 2007,
faced to south, tilt angle 30°
0.8
0.5
5 7 9 11 13 15 17 19
SANYO HIT solar modules are 100% emission
free, have no moving parts and produce no
noise.The dimensions of the HIT modules
allow space-saving installation and
achievement of maximum output power
possible on given roof area.
Special Features
Photovoltaic ModuleNKH205/200
8/8/2019 Sanyo Hip-205 200nkhb5
http://slidepdf.com/reader/full/sanyo-hip-205-200nkhb5 2/2
WarrantyPower output: 20 years (80% of minimum output power)Product workmanship: 2 years
(Based on contract terms)
CAUTION! Please read the operating instructions carefully before using the products.
Due to our policy of continual improvement the products covered by this brochure may be changed without notice.
Weight: 15kg
unit: mm
Front Backsideside
Section A-A Section B-B
C O N N E C T O R
A A
B
B
( 1 0 2 0 )
812
1 5 8 0
3 5
12
35
3 5
( + )positivenegative( )
Dimensions and weight
Models HIP-xxxNKHB5
Maximum power (Pmax)
Max. power voltage (Vmp)
Max. power current (Imp)
Open circuit voltage (Voc)
Short circuit current (Isc)
Maximum system voltage 600
Electrical data
Warranted minimum power (Pmin)
Output power tolerance
Temperature coefficient of Pmax [%/ °C]
[V/ °C]Voc
[mA/ °C]lsc
[W]
[V]
[A]
[V]
[A]
[W]
[%]
[V]
+10/-5
-0.30
200205
205
194.75
50.3
5.54
40.7
5.05
-0.126
1.66
Reference data for model HIP-205NKHB5
Dependence on temperature
C u r r e n t [ A ]
0.00
1.00
2.00
3.00
4.00
5.00
6.00
Voltage[V]
100 20 30 40 50 60
AM-1.5, 1000W/m2
75℃
50℃
25℃
0℃
Dependence on irradianceCell temperature: 25
oC
C u r r e n t [ A ]
0.00
1.00
2.00
3.00
4.00
5.00
6.00
Voltage[V]100 20 30 40 50 60
1000W/m2
800W/m2
600W/m2
400W/m2
200W/m2
Electrical and Mechanical Characteristics
HIP-205NKHB5,HIP-200NKHB5
Certificates
Note 1: Standard Test Conditions: Air mass 1.5, Irradiance = 1000W/m2,
Cell temperature = 25°C
Note 2: The values in the above table are nominal
15Maximum over current rating [A]
(12)(7)
( 7 )
Please consult your local dealer for more information.
Certificate Number: PV05-53203-1012
An above number is a certification number by JET.
JET: Japan Electrical Safety & Environment Technology Laboratories
200
190.0
40.0
5.00
49.6
5.50
-0.33
-0.125
1.65
JUNCTIONBOX
LABEL
[ASIA & Oceania]
International Sales & Marketing H.Q.
Tel.81-6-6994-7359 Fax.81-6-6994-7083
Solar Division
http://www.sanyo.com/solar
email: [email protected] 1 2 / 0 8