SCHWIERIGKEITEN BEIM ÜBERSETZEN

17
SCHWIERIGKEITEN BEIM ÜBERSETZEN IM BEREICH DER ELEKTRIZITÄT

Transcript of SCHWIERIGKEITEN BEIM ÜBERSETZEN

Page 1: SCHWIERIGKEITEN BEIM ÜBERSETZEN

SCHWIERIGKEITEN BEIM ÜBERSETZEN

IM BEREICH DER ELEKTRIZITÄT

Page 2: SCHWIERIGKEITEN BEIM ÜBERSETZEN

L.V. (Leistungsverzeichnis)

Page 3: SCHWIERIGKEITEN BEIM ÜBERSETZEN
Page 4: SCHWIERIGKEITEN BEIM ÜBERSETZEN

Diff.Dr.Transm.i.Schutzk. kompl. mont.Montare completa transmitator de presiune de diferenta intr-o cutie de protectie

Druck-/Differenzdruck-Transmitter mit Kapillare in einen vormontierten Schutzkasten, mit beigestellter Standardhalterung, komplett montieren.-Transmitter mit Jordalschrauben auf bauseits vorhandene Montageschienen montieren. -Montage aller erforderlichen Durchführungen. - Der Ausschnitt für die Durchführung der Kapillarleitung ist im Kastenteil ohne Dichtung zu erstellen. - Verlegen der Kapillarleitung in LV-Pos. 5214.09.01.02. - Montageausführung siehe Hook-Up EMR 1-14.3.14.03.02.01 und EMR 1-14.3.14.03.02.02.

Montare completa transmitator de presiune / presiune de diferenta cu capilara intr-o cutie de protectie premontata cu suport standard aflat la fata locului -Montare transmitator cu suruburi Jordahl pe sina de montaj aflata la fata locului - Montajul tuturor trecerilor necesare - Se efectueaza slitul ptr trecerea conductelor capilare in cutie fara etansare - Pozarea liniilor capilare in pozitia din caietul de sarcini 5214.09.01.02 -Vezi executare montaj Hook- Up EMR 1-14.3.14.03.02.01 si EMR 1-14.3.14.03.02.02

Dr.Transm.m.Kap.i.Schutzk. kompl. mont.Montare completa transmitator de presiune cu capilara intr-o cutie de protectie

Diff.Dr.Tr.m.Kap.i.Schutzk. kompl. mont.Montare completa transmitator de presiune de diferenta intr-o cutie de protectie

Page 5: SCHWIERIGKEITEN BEIM ÜBERSETZEN

-WAS?-WOMIT?-WOHIN?-MIT WAS NOCH?-WIE?

-WIE?-WAS?-WOMIT?-WOHIN?-WAS NOCH?

Mont. Compl. Trans. D. Pres. C. Cap. i. Cut. Prot.

Mont. Compl. Trans. D. Pres. D . dif. i. Cut. Prot.

Page 6: SCHWIERIGKEITEN BEIM ÜBERSETZEN

Leuchte an Wand oder Decke mont. - Auf vorhandene Dübel, Löcher oder Gewinde ausrichten. -Incl. Befestigung des Lampenhalters an der Lampe. - Leuchte montieren. -Bei den Positionen kleine Wannenleuchte und Feuchtraumleuchte montieren sind die Kabeleinführungen erstellen mit enthalten. -Einsetzen der Lampen, auch wenn dies später als zum Zeitpunkt der Montage der Leuchte erfolgt. Bei der Montage der Leuchte ist darauf zu achten, dass die Lampen mit normalen Mitteln wie Staf-feleien und Leitern auszuwechseln sind. - Sind Abhängekonstruktionen erforderlich, werden diese nach der LV-Pos. “Konstruktionsteile“ abgerechnet.

Montare corp de iluminat pe perete sau tavan - Ajustare pe diblurile, gaurile sau filetele existente - Inclusiv prindere suport lampa la corp de iluminat - Montare bec/ iluminator - La pozitiile montare Corp de iluminat mic si corp de iluminat ptr spatii umede, sunt incluse efectuarile trecerilor pentru cablu - Inlocuirea lampilor, chiar daca aceasta este efectuata dupa momentul montajului becului. La montajul becurilor se are in vedere ca lampile sa fie schimbate cu mijloace normale precum scari si sevalete. - In cazul in care sunt necesare constructii suspendate, se deconteaza cu pozitia din caietul de sarcini " Piese de constructii"

Page 7: SCHWIERIGKEITEN BEIM ÜBERSETZEN
Page 8: SCHWIERIGKEITEN BEIM ÜBERSETZEN

Wannenleuchte = corp de iluminat, neon???

Page 9: SCHWIERIGKEITEN BEIM ÜBERSETZEN

Komische Wörter

Page 10: SCHWIERIGKEITEN BEIM ÜBERSETZEN

Mutter oder Mutter

Page 11: SCHWIERIGKEITEN BEIM ÜBERSETZEN
Page 12: SCHWIERIGKEITEN BEIM ÜBERSETZEN
Page 13: SCHWIERIGKEITEN BEIM ÜBERSETZEN

Führungsschiene = profil conductor

Page 14: SCHWIERIGKEITEN BEIM ÜBERSETZEN

Federleiste = mufa cu pini

Page 15: SCHWIERIGKEITEN BEIM ÜBERSETZEN

Käfigmutter = piulita cu capac roata

Page 16: SCHWIERIGKEITEN BEIM ÜBERSETZEN

Schnappbefestigung = prindere cu clips

Page 17: SCHWIERIGKEITEN BEIM ÜBERSETZEN

Aber.......