Terrestrische Photovoltaik-Module mit Silizium- · PDF fileTerrestrische Photovoltaik-Module...

8

Transcript of Terrestrische Photovoltaik-Module mit Silizium- · PDF fileTerrestrische Photovoltaik-Module...

Terrestrische Photovoltaik-Module mit Silizium-SolarzellenCrystalline silicon terrestrial photovoltaic modules

Typ(en) / Type(s):

A) SPM-10PB308B) SPM-15PB308C) SPM-20PB308D) SPM-25PB308E) SPM-35PB308F) SPM-45PB308G) SPM-50PB301H) SPM-60PB301I) SPM-70PB301J) SPM-80PB211K) SPM-90PB301L) SPM-95PB212M) SPM-100PB301N) SPM-120PB301O) SPM-140PB201P) SPM-150PB309Q) SPM-10SB308R) SPM-15SB308S) SPM-25SB308T) SPM-35SB301U) SPM-50SB301V) SPM-55SB111W) SPM-65SB112X) SPM-60SB301Y) SPM-80SB113Z) SPM-80SB301AA) SPM-90SB114AB) SPM-90SB118AC) SPM-100SB115AD) SPM-100SB101AE) SPM-115SB116AF) SPM-150SB103AG) SPM-40SBAH) SPM-20SBAI) SPM-10SB

Ausweis-Nr. /Certificate No.

40035412

VDE Prüf- und Zertifizierungsinstitut GmbH * Testing and Certification Institute_____________________________________________________________________Merianstrasse 28, D-63069 Offenbach Phone +49 (0) 69 83 06-0

Telefax +49 (0) 69 83 06-555

Name und Sitz des Genehmigungs-Inhabers / Name andregistered seat of the Certificate holder

Sunny International Power Corp, Block A5-2 Phase 5, Shuofang Industrial Concentrative Area,214142 WUXI CITY, Jiangsu, CHINA

Aktenzeichen / File ref. Datum / Date

5009415-3972-0001 / 166120 / FG82 / HET 2012-07-13

Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Zeichengenehmigungsausweises Nr. 40035412This supplement is only valid in conjunction with page 1 of the Certificate No. 40035412.

Blatt /page

2

Fortsetzung siehe Blatt 3 /continued on page 3

VDE Prüf- und ZertifizierungsinstitutZeichengenehmigung

Struktur der Typenbezeichnung XXX in der Typenbezeichnung ersetzt die Leistung in Watt beiSTC und kann jeder Wert zwischen:

Structure of typename XXX in the type number replaces the power in Watt at STC andcan be any number between:80-96Für / for K),80-96Für / for L)92-111Für / for M)100-120Für / for N)120-145Für / for O)124-150Für / for P)9-11Für / for Q)13-17Für / for R)20-26Für / for S)27-35Für / for T)40-52Für / for U)44-58Für / for V)53-70Für / for W)55-71Für / for X)62-81Für / for Y)67-87Für / for Z)71-93Für / for AA),AB)80-105Für / for AC),AD)88-116

Ausweis-Nr. /Certificate No.

40035412

VDE Prüf- und Zertifizierungsinstitut GmbH * Testing and Certification Institute_____________________________________________________________________Merianstrasse 28, D-63069 Offenbach Phone +49 (0) 69 83 06-0

Telefax +49 (0) 69 83 06-555

Name und Sitz des Genehmigungs-Inhabers / Name andregistered seat of the Certificate holder

Sunny International Power Corp, Block A5-2 Phase 5, Shuofang Industrial Concentrative Area,214142 WUXI CITY, Jiangsu, CHINA

Aktenzeichen / File ref. Datum / Date

5009415-3972-0001 / 166120 / FG82 / HET 2012-07-13

Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Zeichengenehmigungsausweises Nr. 40035412This supplement is only valid in conjunction with page 1 of the Certificate No. 40035412.

Blatt /page

3

Fortsetzung siehe Blatt 4 /continued on page 4

VDE Prüf- und ZertifizierungsinstitutZeichengenehmigung

Für / for AE)120-157Für / for AF)40Für / for AG)20Für / for AH)10Für / for AI)

Max. Systemspannung DC 50 VMax. system voltage

Anwendungsklasse CClass of application

Schutzklasse IIIClass

Brandbeständigkeit CFire resistance

Weitere Angaben Siehe Anlage 1 - 18Further information See appendix 1 - 18

_____________________________________________________________________Dieser Zeichengenehmigungs-Ausweis bildet eine Grundlage für die EG-Konformitätserklärung undCE-Kennzeichnung durch den Hersteller oder dessen Bevollmächtigten und bescheinigt die Konformitätmit den grundlegenden Schutzanforderungen der EG-Niederspannungsrichtlinie 2006/95/EG mit ihrenÄnderungen.This Marks Approval is a basis for the EC Declaration of Conformity and the CE Marking by themanufacturer or his agent and proves the conformity with the essential safety requirements of theEC Low-Voltage Directive 2006/95/EC including amendments.

VDE Prüf- und Zertifizierungsinstitut GmbHVDE Testing and Certification InstituteFachgebiet FG82Section FG82

Ausweis-Nr. /Certificate No.

40035412

VDE Prüf- und Zertifizierungsinstitut GmbH * Testing and Certification Institute_____________________________________________________________________Merianstrasse 28, D-63069 Offenbach Phone +49 (0) 69 83 06-0

Telefax +49 (0) 69 83 06-555

Name und Sitz des Genehmigungs-Inhabers / Name andregistered seat of the Certificate holder

Sunny International Power Corp, Block A5-2 Phase 5, Shuofang Industrial Concentrative Area,214142 WUXI CITY, Jiangsu, CHINA

Aktenzeichen / File ref. Datum / Date

5009415-3972-0001 / 166120 / FG82 / HET 2012-07-13

Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Zeichengenehmigungsausweises Nr. 40035412This supplement is only valid in conjunction with page 1 of the Certificate No. 40035412.

Blatt /page

4

VDE Prüf- und ZertifizierungsinstitutZeichengenehmigung

Terrestrische Photovoltaik-Module mit Silizium-SolarzellenCrystalline silicon terrestrial photovoltaic modules

Fertigungsstätte(n)Place(s) of manufacture

Referenz/Reference Sunny International Power Corp30019599 Xiekeng Precinct

Qingxi Town523660 DONGGUAN CITYGuangdongCHINA

Referenz/Reference Sunny International Power Corp30018906 Block A5-2 Phase 5

Shuofang Industrial Concentrative Area214142 WUXI CITYJiangsuCHINA

VDE Prüf- und Zertifizierungsinstitut GmbHVDE Testing and Certification InstituteFachgebiet FG82Section FG82

Ausweis-Nr. /Certificate No.

40035412

VDE Prüf- und Zertifizierungsinstitut GmbH * Testing and Certification Institute_____________________________________________________________________Merianstrasse 28, D-63069 Offenbach Phone +49 (0) 69 83 06-0

Telefax +49 (0) 69 83 06-555

Name und Sitz des Genehmigungs-Inhabers / Name andregistered seat of the Certificate holder

Sunny International Power Corp, Block A5-2 Phase 5, Shuofang Industrial Concentrative Area,214142 WUXI CITY, Jiangsu, CHINA

Aktenzeichen / File ref. Datum / Date

5009415-3972-0001 / 166120 / FG82 / HET 2012-07-13

Dieses Beiblatt ist Bestandteil des Zeichengenehmigungsausweises Nr. 40035412.This supplement is part of the Certificate No. 40035412.

Beiblatt /Supplement

VDE Prüf- und ZertifizierungsinstitutZeichengenehmigung

Genehmigung zum Benutzen des auf Seite 1 abgebildeten markenrechtlich geschützten Zeichens desVDE:

Grundlage für die Benutzung sind die Allgemeinen Geschäftsbedingungen (AGB) der VDE Prüf- undZertifizierungsinstitut GmbH (www.vde.com\AGB-Institut). Das Recht zur Benutzung erstreckt sich nurauf die bezeichnete Firma mit den genannten Fertigungsstätten und die oben aufgeführten Produktemit den zugeordneten Bezeichnungen. Die Fertigungsstätte muss so eingerichtet sein, dass einegleichmäßige Herstellung der geprüften und zertifizierten Ausführung gewährleistet ist.Die Genehmigung ist so lange gültig wie die VDE-Bestimmungen gelten, die der Zertifizierung zu-grunde gelegen haben, sofern sie nicht auf Grund anderer Bedingungen aus der VDE Prüf- undZertifizierungsordnung (PM102) zurückgezogen werden muss.Der Gültigkeitszeitraum einer VDE-GS-Zeichengenehmigung kann auf Antrag verlängert werden. Beigesetzlichen und / oder normativen Änderungen kann die VDE-GS-Zeichengenehmigung ihre Gültigkeitzu einem früheren als dem angegebenen Datum verlieren.Produkte, die das Biozid Dimethylfumarat (DMF) enthalten, dürfen gemäß der Kommissionsent-scheidung 2009/251/EG nicht mehr in den Verkehr gebracht oder auf dem Markt bereitgestelltwerden.Der VDE-Zeichengenehmigungsausweis wird ausschließlich auf der ersten Seite unterzeichnet.

Approval to use the legally protected Mark of the VDE as shown on the first page:Basis for the use are the general terms and conditions of the VDE Testing and Certification Institute(www.vde.com\terms-institute). The right to use the mark is granted only to the mentioned companywith the named places of manufacture and the listed products with the related type references. Theplace of manufacture shall be equipped in a way that a constant manufacturing of the certifiedconstruction is assured.The approval is valid as long as the VDE specifications are in force, on which the certification isbased on, unless it is withdrawn according to the VDE Testing and Certification Procedure(PM102E).The validity period of a VDE-GS-Mark Approval may be prolonged on request. In case of changes inlegal and / or normative requirements, the validity period of a VDE-GS-Mark Approval may beshortened.Products containing the biocide dimethylfumarate (DMF) may not be marketed or made available onthe EC market according to the Commission Decision 2009/251/EC.The approval is solely signed on the first page.

Ausweis-Nr. /Certificate No.

40035412

Name und Sitz des Genehmigungs-Inhabers / Name andregistered seat of the Certificate holder

Sunny International Power Corp, Block A5-2 Phase 5, Shuofang Industrial Concentrative Area,214142 WUXI CITY, Jiangsu, CHINA

Aktenzeichen / File ref. Datum / Date

5009415-3972-0001 / 166120 / FG82 / HET 2012-07-13

Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Zeichengenehmigungsausweises Nr. 40035412This supplement is only valid in conjunction with page 1 of the Certificate No. 40035412.

Infoblatt /Info sheet

VDE Prüf- und ZertifizierungsinstitutZeichengenehmigung

EG-KonformitätserklärungName/Anschrift des Ausstellers:

Sunny International Power CorpBlock A5-2 Phase 5Shuofang Industrial Concentrative Area214142 WUXI CITYJiangsuCHINA

Produktbezeichnung: Terrestrische Photovoltaik-Module mit Silizium-Solarzellen

Typenbezeichnung: SPM-10PB308; SPM-15PB308; SPM-20PB308;SPM-25PB308; SPM-35PB308; SPM-45PB308; SPM-50PB301; SPM-60PB301;SPM-70PB301; SPM-80PB211; SPM-90PB301; SPM-95PB212; SPM-100PB301;SPM-120PB301; SPM-140PB201; SPM-150PB309; SPM-10SB308; SPM-15SB308;SPM-25SB308; SPM-35SB301; SPM-50SB301; SPM-55SB111; SPM-65SB112;SPM-60SB301; SPM-80SB113; SPM-80SB301; SPM-90SB114; SPM-90SB118;SPM-100SB115; SPM-100SB101; SPM-115SB116; SPM-150SB103; SPM-40SB; SPM-20SB;SPM-10SB

Das bezeichnete Produkt erfüllt die Bestimmungen der Richtlinie:

2006/95/EG

"Richtlinie des Rates zur Angleichung der Rechtsvorschriften der Mitgliedstaatenbetreffend elektrische Betriebsmittel zur Verwendung innerhalb bestimmter

Spannungsgrenzen".

Die Übereinstimmung des bezeichneten Produktes mit den Anforderungen der Richtlinie wird durch dietechnische Dokumentation sowie die vollständige Einhaltung folgender Normen nachgewiesen:

DIN EN 61215 ( VDE 0126-31):2006-02; EN 61215:2005-08

DIN EN 61730-1 (VDE 0126 Teil 30-1):2007-10; EN 61730-1:2007-05

DIN EN 61730-2 (VDE 0126 Teil 30-2):2007-10; EN 61730-2:2007-05

IEC 61215(ed.2)

IEC 61730-1(ed.1)

IEC 61730-2(ed.1)

Das VDE Prüf-und Zertifizierungsinstitut GmbH (EU-Kenn-Nr. 0366), Merianstr. 28, 63069 Offenbach,hat das Produkt geprüft und zertifiziert.

Die letzten beiden Ziffern des Jahres, in dem die CE-Kennzeichnung angebracht wurde:

Zeichengenehmigungsausweis Nr. 40035412Aktenzeichen 5009415-3972-0001 / 166120 / FG82 / HET

____________________ ____________________(Ort, Datum) (Rechtsverbindliche Unterschrift des Ausstellers)

EC Declaration of ConformityIssuer's name and address:

Sunny International Power CorpBlock A5-2 Phase 5Shuofang Industrial Concentrative Area214142 WUXI CITYJiangsuCHINA

Product: Crystalline silicon terrestrial photovoltaic modules

Type designation: SPM-10PB308; SPM-15PB308; SPM-20PB308;SPM-25PB308; SPM-35PB308; SPM-45PB308; SPM-50PB301; SPM-60PB301;SPM-70PB301; SPM-80PB211; SPM-90PB301; SPM-95PB212; SPM-100PB301;SPM-120PB301; SPM-140PB201; SPM-150PB309; SPM-10SB308; SPM-15SB308;SPM-25SB308; SPM-35SB301; SPM-50SB301; SPM-55SB111; SPM-65SB112;SPM-60SB301; SPM-80SB113; SPM-80SB301; SPM-90SB114; SPM-90SB118;SPM-100SB115; SPM-100SB101; SPM-115SB116; SPM-150SB103; SPM-40SB; SPM-20SB;SPM-10SB

The designated product is in conformity with the European Directive:

2006/95/EC

"Council Directive on the harmonization of the laws of the Member States relatingto electrical equipment designed for use within certain voltage limits".

The technical documentation and full compliance with the standards listed below proves theconformity of the product with the requirements of the above-mentioned EC Directive:

DIN EN 61215 ( VDE 0126-31):2006-02; EN 61215:2005-08

DIN EN 61730-1 (VDE 0126 Teil 30-1):2007-10; EN 61730-1:2007-05

DIN EN 61730-2 (VDE 0126 Teil 30-2):2007-10; EN 61730-2:2007-05

IEC 61215(ed.2)

IEC 61730-1(ed.1)

IEC 61730-2(ed.1)

The VDE Testing and Certification Institute (EU Identification No.0366), Merianstr. 28, 63069Offenbach (Germany), has tested and certified the product.

Last two digits of the year in which the CE marking was affixed:

Certificate No. 40035412File Reference 5009415-3972-0001 / 166120 / FG82 / HET

____________________ ____________________(Place, Date) (Legally binding signature of the issuer)