Titel der Präsentation - dc-corp.resource.bosch.com · 13.07.2015 | DC-IA/STS33 | © Bosch Rexroth...

13.07.2015 | DC-IA/STS33 | © Bosch Rexroth AG 2015. Alle Rechte vorbehalten, auch bzgl. jeder Verfügung, Verwertung, Reproduktion, Bearbeitung, Weitergabe sowie für den Fall von Schutzrechtsanmeldungen.

Quickstart SytronixSize

1


Content

Content

1. Start Program 3

2.1 Start Drive Sizing – Home Screen 4

2.2 Start Drive Sizing – Project Management Screen 5

3. Application Selection 6

4. Motion Profile Data 7

5. Mechanical Data – Pump Selection 14

6. Drive Selection - Search Drives 16

Drive Selection – Selected Set 18

Drive Selection – Selected Set – Balance of Energy 19

7. File Handling 20

8. Project – Calculation of Additional Drives 21

2


1. Start Program

Download SytronixSize

https://www.boschrexroth.com/business_units/dc_ia/subwebsites/extranet_dc_

ia/de/01_product_infos/system_loesungen/Sytronix/index.jsp

Extract ZIP-file in your own computer drive

Start program without installation with start.exe (Recommended!)

Or

Install software with setup.exe

and start program from desktop or windows top menu

3

https://www.boschrexroth.com/business_units/dc_ia/subwebsites/extranet_dc_ia/de/01_product_infos/system_loesungen/Sytronix/index.jsp

https://www.boschrexroth.com/business_units/dc_ia/subwebsites/extranet_dc_ia/de/01_product_infos/system_loesungen/Sytronix/index.jsp


2. Start Drive Sizing – Home Screen

Click on ‘ Drive Sizing’

4


2. Start Drive Sizing – Project Management Screen

1. Click on ‘ Start Project Management’

On home screen

2. Click on ‘ Drive Sizing’

(two possibilities)

5


3. Application Selection

1. Choose Motion Profile (click on text or diagram)

2. Choose Mechanical Model

( click on text or diagram) 3. Click on ‘Next’

Use quick selection of sample application

6


4. Motion Profile Data

Differentiated between simplified, phased and completed profile

Simplified Profile Phased Profile Completed Profile

Enter profile • fast and simple •Divided in motion-, pressure build-up- and pressure hold-phases

• Enter every single step of phase

Accuracy • Less accurate •More accurate •Most accurate

Reference Value • End value of previous phase

• Zero • End value of previous phase

Phase Transition •Performance of phase transition can be chosen

• Time for phase transition is added on phase time

• Time for phase transition is set from program and cannot be changed

•Performance of phase transition can be chosen

• Time is included in phase time

•Can be entered and changed

•Can be entered and changed

7


4. Motion Profile Data - Variable Flow Rate, Constant Pressure – Simplified

Profile

1. Enter data Phase Name, Flow

Rate, Time and Constant Pressure

2. Choose setting point in case of variable displacement pump

8


4. Motion Profile Data - Variable Flow Rate, Constant Pressure – Simplified

Profile

3. Insert data, Update data after changing or Delete phase

4. Choose performance of phase transitions

5. Click on ‘Next’

9


4. Motion Profile Data - Variable Flow Rate, Constant Pressure – Phased

Profile


1. Enter data Phase Name, Phase

Type, Flow Rate, Pressure and Time

10


4. Motion Profile Data - Variable Flow Rate, Constant Pressure – Phased

Profile

3. Insert data, Update data after changing or Delete phase

5. Click on ‘Next’ 4. Choose performance of phase transitions

11


4. Motion Profile Data – Variable Flow Rate, Variable Pressure – Completed

Profile


1. Enter data Phase Name, Phase

Type, Flow Rate, Pressure and Time

12


4. Motion Profile Data – Variable Flow Rate, Variable Pressure – Completed

Profile

3. Insert data Update data after changing Delete phase


13


5. Mechanical Data – Pump Selection

1. Select pump from list (see next slide)


2. Set Vg max and Vg min, if variable

displacement pump is used

14


5. Mechanical Data – Pump Selection

2.1 Choose pump from list

(click on it) 2.2 Click on ‘Apply’

2.2 Reasons why pumps have been rejected: Maximum speed resulting from motion profile is greater than

maximum speed of pump

15


6. Drive Selection – Search Drives

2. Security Factors for Maximum and

Continuous Torque

1. Choose Filter Values for Drive Search

16


6. Drive Selection – Search Drives

3. Search Drives 4. Choose Drive 5. Click on ‘Next’ 5. More Details of

Selected Set 5. Check coupling

17


6. Drive Selection – Selected Set

Switch between diagrams

Balance of Energy Comparison between

Sytronix, DFE and Constant Pump

Export Data Exports specific drive

data in excel file

Print Prints data sheet

finished selection

18


6. Drive Selection – Selected Set – Balance of Energy

19


7. File Handling

Name axis

Modify drive

Save as drive

Print preview

Go to Drive selection

Delete drive

Print Drive

20


8. Project – Calculation of Additional Drives

Edit Project Size Additional

Drive

21

Titel der Präsentation - dc-corp.resource.bosch.com · 13.07.2015 | DC-IA/STS33 | © Bosch Rexroth...

Documents

Transcript of Titel der Präsentation - dc-corp.resource.bosch.com · 13.07.2015 | DC-IA/STS33 | © Bosch Rexroth...