1Technical design data and Machinery List
A) Technical design data
1.1 ProductThe machinery was designed for the production of high-quality MDF, using UF-/MUF-resin for a wide range of board thicknesses and formats.The process technology bases on the use of a ContiRoll-press.All boards are sanded and are suitable for the use in the furniture industry or serve general purposes (e.g. flooring, etc.).
1.2 Press design parametersNominal press length 18 000 mmPress width 2 510 mm
1.3 Board sizeRaw board width approx. 2 510 mmNominal board width approx. 2 440 (8 ft) mmNominal board length approx. 5 520 (18 ft) mm mechanical design speed min. 20 mm/s
max. 500 mm/sFinished board formats
1 (4 x 8) 1 220 x 2 440 mm 2 (5 x 8) 1 525 x 2 440 mm3 (6 x 8') 1 830 x 2 440 mm4 (7 x 8') 2 135 x 2 440 mm5 (4 x 9 4 x 18) 2 745 - 5 490 x 1 220 mmBoard width to be sanded approx. 2 440 (8 ft) mmNet thickness range of the boards 2,6 up to 25 mm
PRODUCT INFORMATION No. A0344
21.4 Production outputAll production figures mentioned below are for information purposes only and not subject to any guarantee by Siempelkamp.
The table below stating the production output of the machinery bases on the original Supply contract concluded between Siempelkamp and DongWha in 1989.
2404915244073025
2604915244075019
2704915244076015
2704915244078010
270491524408206
270491524408505
270491524408704
260491524409003,2
250491524409002,6
[m/day][mm][mm][ kg/m ][mm]
Production outputNominal board length(ex diagonal saw)
Nominal board width(after raw board trimming)
Nominal raw board density (referred to nominal
thickness of sanded board)
Nominal thickness of sanded board
PRODUCT INFORMATION No. A0344
3Due to the development in the MDF production technology during the past 20 years Dongwha was able to reach the following capacity figures in 2011.
4504915244072015
660491524405509
340491524409407,7
[m/day][mm][mm][ kg/m ][mm]
Production outputNominal board length(ex diagonal saw)
Nominal board width(after raw board trimming)
Nominal raw board density (referred to nominal thickness of sanded board)
Nominal thickness of sanded board
PRODUCT INFORMATION No. A0344
41.5 Working levelsforming line 2 135 mmpress 2 135 mmcooling and stacking line 2 135 mmsanding and trimming/cutting line 2 135 mm
1.6 Height and weight of the stacksStack height at emergency stacker max. 800 mmStack weight ex trimming/cutting line max. 9 500 kgPack height in saw max. 50 mmStack height ex trimming/cutting line max. 800 mmStack weight ex trimming/cutting line max. 3 200 kg
1.7 Electric powerElectric power 3-phase AC currentNetwork system TN-systemZero conductor no loadVoltage between the phases 440 VFrequency 60 HzSupply voltage variation 5 % (acc. to DIN/EN 60034)Supply frequency variation 2 % (acc. to DIN/EN 60034)Direct start-up < 30 kW and all drives for the pumps of hydraulic
system & secondary heatingStar / delta from > 30 kWControl voltage 24 V DCLamp voltage 24 V DCValve voltage 24 V DC
PRODUCT INFORMATION No. A0344
5Valve voltage 24 V DCValve voltage for motor control valves 220 V ACBrake voltage for three-phase a.c. motors 220 V ACAmbient temperature at the site max. + 40 C (prerequisite for a decentralised control system design)
min. + 5 CRelative humidity of air max. 70 %Temperature in control rooms/control stands max. 27 C (to be provided by the customer e.g. by air-conditioning)
1.8 Thermal energy requirementFor the press thermal oil approx.280C
1.9 Compressed air requirementOil-free, dried, filtered and min. 7.0 bar abs.cooled to ambient temperature (at the consumer)
1.10 Extinguishing water requirementExtinguishing water pressure min. 8.0 bar abs.
PRODUCT INFORMATION No. A0344
6PRODUCT INFORMATION No. A0344
SiempelkampXReject Mat Hopper107 1309for Forming Line and Continuous Press
SiempelkampXControls of the D.C. drives07 1308
Boeckels or ElmedOptionMetal Detector Assembly107 1306
SiempelkampXPair of Side Trim Saws107 1305
Length approx. 13,5 m
SiempelkampXContinuous Pre-Press107 1304
SiempelkampOptionMoisture analyzer (infrared)107 1303
TexpanXArea Weight Scale107 1302
Length of conveyor approx. 48 m
SiempelkampXForming Belt Conveyor for Continuous Press107 1301
Forming width 2720 mm
SiempelkampXForming machine107 0601
ManufacturerAvailableDescriptionQty.Pos.
B) Machinery ListThe machinery listed below are mainly designed and supplied by Siempelkamp in 1989/90 under the reference number A344 & D374
7Length of boards 4600 or 4915 or 5520 mm
Trimming width 2440 mm
SiempelkampXSaw Assembly for Trimming and Cross-Cutting107 1401
SiempelkampXElectric Control and Switch Equipment107 2402
SiempelkampNewUpgrade of existing Control, Monitoring and Measuring Equipment for the ContiRoll Press107 2401
MinimaxXFire extinguishing system for the ContiRoll Press
SiempelkampXSecondary Heating Circuits for the ContiRoll Press107 1315
System pressure 300 bar
SiempelkampXHydraulic Pressure Unit for the ContiRoll Press107 1314
Production speed range 20 500 mm /sec
Wedge system for adjustment of press gapPressing width 2550 mm
Number of frame units 18
Nominal press length 18 m
SiempelkampXContiRoll Continuous Hydraulic Hotpress107 1313
ManufacturerAvailableDescriptionQty.Pos.
PRODUCT INFORMATION No. A0344
8PRODUCT INFORMATION No. A0344
Effective board pockets 24
Effective turn 180 degr.
DongWhaXCooling Turners207 1408
Approx. 2600 x 13000 mm
Between the two cooling turners
DongWhaXRoller Conveyor107 1407
Approx. 2600 x 5500 mm
At the infeed of first cooling turner
DongWhaXRoller Conveyor107 1406
DongWhaXReject-Boards Dumping Station07 1405Approx. 2600 x 5500 mm
On top of raw board scale
DongWhaXRoller Conveyor107 1404
TexpanXBoard Weighing Scale107 1403
ImalXBoard Thickness Measuring Device107 1402
ManufacturerAvailableDescriptionQty.Pos.
9PRODUCT INFORMATION No. A0344
Approx. 5500 x 2500 mm
On floor next to lifting tables
DongWhaXStack Roller Conveyors207 1414
Approx. 2500 x 5500 mm
To form a stack of boards behind cooling turner
DongWhaXLifting Tables207 1413
Approx. 5500 x 2500 mm
On top of lifting tables
DongWhaXStack Roller Conveyors207 1412
To form a flush stack from single boards which have to be stacked when the sanding line is stopped
SiempelkampXStacking Equipment107 1411
Approx. 2600 x 6000 mm
Transport of boards to the sanding machine
DongWhaXRoller Conveyor107 1410
Approx. 2600 x 8500 mm
Transport of boards out of cooling turner
DongWhaXRoller Conveyor107 1409
ManufacturerAvailableDescriptionQty.Pos.
10
PRODUCT INFORMATION No. A0344
Approx. 2600 x 7000 mm
After the sanding machine
DongWhaXRoller Conveyor107 1420
4 fine sanding units
2 calibrating sanding units
Working width max. 2600 mm
SteinemannXCalibrating and Finishing Sander107 1419
Approx. 2600 x 7500 mm
Transport of boards to the sanding machine
DongWhaXRoller Conveyor107 1418
Approx. 2600 x 5500 mm
Transport of boards to the sanding machine
DongWhaXRoller Conveyor107 1417
To charge stored boards back into the sanding line
SiempelkampXBoard Infeed Device107 1416
Approx. 2600 x 5500 mm
Transport of a stack of panels
DongWhaXStack Transport Carriage107 1415
ManufacturerAvailableDescriptionQty.Pos.
11
PRODUCT INFORMATION No. A0344
Approx. 5500 x 5200 mm
Cross transport between storage lift and roller conveyor
DongWhaXBelt Conveyor107 1425
Approx. 2500 x 5500 mm
Storing packages/single panels
DongWhaXLifting Cage107 1424
Approx. 5500 x 2800 mm
Cross transport between sander and dividing saw
DongWhaXBelt Conveyor107 1423
To form a flush stack from single boards (B-quality)DongWhaXStacking Equipment107 1422
Approx. 2600 x 5500 mm
After the inspection station
DongWhaXStacking Equipment107 1421
Divide master boards lengthwise into strips of 4ft width
Between cooling turners and stackers
DongWhaXLongitudinal dividing saw1
ManufacturerAvailableDescriptionQty.Pos.
12
PRODUCT INFORMATION No. A0344
Approx. 2100 x 5000 mm
On floor next to lifting tables
SiempelkampOptionStack Roller Conveyors207 1433
SiempelkampOptionLifting Tables (Option)207 1432Approx. 1900 x 2500 mm
On top of lifting tables
SiempelkampOptionStack Roller Conveyors207 1431
To form stacks at 2 positions
SiempelkampOptionStacking Equipments207 1430
Transport of divided boards to the 2 stacking stations
DongWhaXRoller Conveyor107 1429
TexpanXTrimming and Dividing Saw107 1428
To feed dividing saw
SiempelkampXBoard Push-off Device107 1427
Approx. 5500 x 2600 mm
Before dividing saw
DongwhaXRoller Conveyor107 1426
ManufacturerAvailableDescriptionQty.Pos.
13
PRODUCT INFORMATION No. A0344
SiempelkampXElectric Control and Switch Equipment07 2501
on floor next to lifting table
SiempelkampXStack Roller Conveyor107 1436
To form stack of boards
SiempelkampXLifting Table107 1435
approx. 5500 x 2500 mm
on top of lifting tables
SiempelkampXStack Roller Conveyor107 1434
ManufacturerAvailableDescriptionQty.Pos.
Items marked with Option as well as essential and recommendable replacement / spare parts can be offered separately.
14
PRODUCT INFORMATION No. A0344
Spreading WallsForming Line Spreading Head
Hydraulic Pre-PressPre-Press Trimming Saw
15
PRODUCT INFORMATION No. A0344
ContiRoll press OutfeedContiRoll Press ContiRoll press Infeed
ContiRoll PressPre-Press Drives ContiRoll press
16
PRODUCT INFORMATION No. A0344
ContiRoll Secondary HeatingContiRoll Secondary Heating
ContiRoll Secondary HeatingContiRoll & Diagonal Saw ContiRoll Hydraulic
17
PRODUCT INFORMATION No. A0344
Sander and Board ControlStar Cooler Emergency Bypass
Board ScaleDiagonal Saw Front Diagonal Saw Back
18
PRODUCT INFORMATION No. A0344
Intermediate Storage Pusher
Board HandlingSteinemann Sander Steinemann Sander
19
PRODUCT INFORMATION No. A0344
Dividing Saw Roller Conveyor to stacker
Saw Table Pusher
20
PRODUCT INFORMATION No. A0344
For further information please contact:
DivisionPre-Owned Machinery
Mr. Hans-Jrgen BuschTel.: +49 2151 92-4438
E-Mail: [email protected]
Mr. Stefan FrischTel.: +49 2151 92-4479
E-Mail: [email protected]