Post on 05-Mar-2021
INTEGRAL SHAFT SUPPORTTECHNISCHE DATEN TECHNICAL DATA
Das Handsymbol kennzeichnet Seiten, auf denen es eine Veränderung zur Vorgängerversion gibt.The hand symbol appears on pages which differ from the previous catalogue version.07/2019
Bitte benutzen Sie Ihr Smartphone mit der entsprechenden Software, scannen Sie den QR-Code ein.
Please use your smartphone with the relevant software, scan the QR-Code.
Sie erhalten die Information, ob dies die aktuellste Version ist.
You will get the information whether you have got the latest version.
SCAN GET INFO INFO
Eigenschaften 04 Characteristics 04
Baureihenübersicht 06 Summary of Series 06
Technische Daten 08 Technical Data 08
Geometrische Daten 08 Geometric Data 08
Anflansch-Außenlagermit hochelastischer TORFLEX Kupplung 08
Integral Shaft Support with a highly flexible TORFLEX coupling 08
Anflansch-Außenlagermit hochelastischer VULKARDAN E Kupplung 10
Integral Shaft Support with a highly flexible VULKARDAN E coupling 10
Anflansch-Außenlagermit hochelastischer VULASTIK L Kupplung 12
Integral Shaft Support with a highly flexible VULASTIK L coupling 12
Fragebogen 14 Questionnaire 14
Erläuterungen des Productcodes 15 Explanations of the Product Code 15
Online-Service 18 Online-Service 18
Gültigkeitsklausel 19 Validity Clause 19
03INTEGRAL SHAFT SUPPORT VULKAN COUPLINGS
INHALT CONTENTS
05VULKAN COUPLINGSINTEGRAL SHAFT SUPPORT
DREHMOMENT TORQUE0.63 kNm – 26.00 kNm
INTEGRAL SHAFT SUPPORTEIGENSCHAFTEN CHARACTERISTICS
EINSATZGEBIETE
Motoren mit doppelt kardanischer Zwischenwelle (z.B. Kardanwelle)
zu frei stehenden Getrieben oder anderen Maschinen.
In Erweiterung des Gelenkwellen-Vorschaltkupplungsprogrammes hat VULKAN
ein Anflansch-Außenlager entwickelt. Dieses Lager wird in Anlagen eingebaut,
in denen die Gelenkwelle einen großen Beugungswinkel hat. Die sich von der
Gelenkwelle ergebenden Reaktionskräfte in radialer und axialer Richtung werden
durch das Glockengehäuse aufgenommen. Dieses reduziert somit signifikant die
Kurbelwellenbelastung des Motors. Die innen sitzende hochelastische Kupplung
stimmt das Drehschwingungsverhalten der Anlage optimal ab.
PRODUKTVORTEILE
Schutz der Kurbelwelle vor axialen und radialen Reaktionskräften
Maßgeschneiderte Lösung zur Kompensation eines
hohen Winkelversatzes zwischen Motor und Getriebe
Flexibel einsetzbar als integrierte elastische Kupplung
in drei Baureihen mit breitem Drehmomentspektrum
AREAS OF APPLICATION
Engines with Cardan shafts with free standing gearboxes or other machinery.
In addition to the Cardan shaft series coupling program VULKAN has developed
the VULKAN ISS, the Integrated Shaft Support. The ISS fitts in installations where
the Cardan shaft has a large angle of inclination. The ISS combines a bellhousing
with bearings capable to take the lateral and axial reaction forces of the Cardan
shaft. The engine crankshaft loadings can therefore be reduced significantly. The
integrated highly flexible coupling optimizes the torsional vibration characteristics
of the system.
PRODUCT BENEFITS
Protection of the crankshaft against axial or radial reaction forces
Customised solution for compensation of high angular
displacement between the motor and the gearbox
It is flexible in use as an integrated elastic coupling
with three models and a wide torque range
12/2018
06 VULKAN COUPLINGS INTEGRAL SHAFT SUPPORT
INTEGRAL SHAFT SUPPORTBAUREIHENÜBERSICHT SUMMARY OF SERIES
12/2018
MIT TORFLEX KUPPLUNG WITH TORFLEX COUPLING
Seite 08 Page 08
Für SAE J617 Schwungradgehäuse-anschlüsse Größe 3 und 4, speziell für Freizeitboote.
For SAE J617 flywheelhousings size 3 and 4, especially for pleasure boats.
Baugruppe Dimension Group KT 630 – KT 1600
Nenndrehmoment Nominal Torque 0.63 kNm – 1.60 kNm
In this catalogue different Integral Shaft Support according to SAE standards are
shown. The various ISS are available with highly flexible TORFLEX, VULKARDAN E
and VULASTIK L couplings for an optimally tuned vibration system. For the vari-
ous designs and torques, please refer to the following series overview.
For more information about the products TORFLEX, VULKARDAN E und VULASTIK L,
please refer to the brochures “Technical data” and “Explanations of the Techni-
cal Data”.
In diesem Katalog sind verschiedene Anflanschaußenlager nach SAE Standards
dargestellt. Diese sind als Ausführung mit hochflexiblen TORFLEX, VULKARDAN E
und VULASTIK L Kupplungen für ein optimal abgestimmtes Schwingungsverhalten
des Antriebssystems verfügbar. Die verschiedenen Ausführungen und Drehmo-
mente entnehmen Sie bitte der nachfolgenden Baureihenübersicht.
Weitere Informationen zu den Produkten TORFLEX, VULKARDAN E und VULASTIK L
erhalten Sie in den Broschüren „Technische Daten“ und „Erläuterungen der
Technischen Daten“.
07VULKAN COUPLINGSINTEGRAL SHAFT SUPPORT12/2018
MIT VULASTIK L KUPPLUNGWITH VULASTIK L COUPLING
Seite 12 Page 12
Für den SAE J617 Schwungradgehäuse-anschluss Größe 00 bis 1.
For SAE J617 flywheelhousing size 00 to 1.
Baugruppe Dimension Group X 2610 – X 4310
Nenndrehmoment Nominal Torque 3.25 kNm – 26.00 kNm
MIT VULKARDAN E KUPPLUNGWITH VULKARDAN E COUPLING
Seite 10 Page 10
Für den SAE J617 Schwungradgehäuse-anschluss Größe 3.
For SAE J617 flywheelhousing size 3.
Baugruppe Dimension Group K 2810 – K 3410
Nenndrehmoment Nominal Torque 1.30 kNm – 2.60 kNm
08 VULKAN COUPLINGS INTEGRAL SHAFT SUPPORT
ØD
10
L7
L11
L31 L30
L32
L33
L12
L13
ØD
8+0.2
-0
ØD
9 h6
ØD
7 T2
ØD
4
ØD
26
ØD
16
ØD
15 T
1
ØD
14 f
7
Ø
D27
+0 -0.1
27
ØD
25 T
5
ØD
24
INTEGRAL SHAFT SUPPORT TORFLEXTORFLEXMITMIT WITHWITH
GEOMETRISCHE DATEN GEOMETRIC DATA
BaugruppeBaugruppe Schwungrad-GehäuseSchwungrad-Gehäuse SchwungradSchwungrad AbmessungenAbmessungen AbmessungenAbmessungen Massenträgheitsmomente Massenträgheitsmomente MasseMasseDimension GroupDimension Group Flywheel housingFlywheel housing FlywheelFlywheel DimensionDimension DimensionDimension Mass moments of inertiaMass moments of inertia MassMass
SAE J617a SAEJ620 D4 D7 T2 D8 D9 D10 D14 D15 T1 D16 D24 D25 T5 D26 D27 L7 L11 L12 L13 L30 L31 L32 L33 J1 J2 m1 m2 mtotal
["] ["] [mm] [mm] [–] [mm] [mm] [mm] [mm] [mm] [–] [mm] [mm] [mm] [–] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kgm²] [kgm²] [kg] [kg] [kg]Teilung / holes Teilung / holes Teilung / holes
KT 21 4 6½ 120,00 101,50 8 10,10 75,00 – 215,90 200,00 6 9,00 403,00 381,00 12 11,00 361,95 29,00 – 12,00 2,00 110,00 42,25 3,50 1,50 0,015 0,005 1,9 5,5 11,4
KT 31 3 11½ 120,00 101,50 8 10,10 75,00 273,00 352,40 333,40 8 11,00 451,00 428,60 12 11,00 409,58 11,00 16,00 12,00 2,00 110,00 39,70 3,50 1,50 0,053 0,040 3,4 8,0 19,8
KT 41 3 11½ 120,00 101,50 8 10,10 75,00 305,00 352,40 333,40 8 11,00 451,00 428,60 12 11,00 409,58 16,00 15,00 12,00 2,00 110,00 39,70 3,50 1,50 0,046 0,080 2,9 10,2 17,7
12/2018
09VULKAN COUPLINGSINTEGRAL SHAFT SUPPORT
MITMIT WITHWITH
GEOMETRISCHE DATEN GEOMETRIC DATA
BaugruppeBaugruppe Schwungrad-GehäuseSchwungrad-Gehäuse SchwungradSchwungrad AbmessungenAbmessungen AbmessungenAbmessungen Massenträgheitsmomente Massenträgheitsmomente MasseMasseDimension GroupDimension Group Flywheel housingFlywheel housing FlywheelFlywheel DimensionDimension DimensionDimension Mass moments of inertiaMass moments of inertia MassMass
SAE J617a SAEJ620 D4 D7 T2 D8 D9 D10 D14 D15 T1 D16 D24 D25 T5 D26 D27 L7 L11 L12 L13 L30 L31 L32 L33 J1 J2 m1 m2 mtotal
["] ["] [mm] [mm] [–] [mm] [mm] [mm] [mm] [mm] [–] [mm] [mm] [mm] [–] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kgm²] [kgm²] [kg] [kg] [kg]Teilung / holes Teilung / holes Teilung / holes
KT 21 4 6½ 120,00 101,50 8 10,10 75,00 – 215,90 200,00 6 9,00 403,00 381,00 12 11,00 361,95 29,00 – 12,00 2,00 110,00 42,25 3,50 1,50 0,015 0,005 1,9 5,5 11,4
KT 31 3 11½ 120,00 101,50 8 10,10 75,00 273,00 352,40 333,40 8 11,00 451,00 428,60 12 11,00 409,58 11,00 16,00 12,00 2,00 110,00 39,70 3,50 1,50 0,053 0,040 3,4 8,0 19,8
KT 41 3 11½ 120,00 101,50 8 10,10 75,00 305,00 352,40 333,40 8 11,00 451,00 428,60 12 11,00 409,58 16,00 15,00 12,00 2,00 110,00 39,70 3,50 1,50 0,046 0,080 2,9 10,2 17,7
12/2018
10 VULKAN COUPLINGS INTEGRAL SHAFT SUPPORT
INTEGRAL SHAFT SUPPORT VULKARDAN EVULKARDAN EMITMIT WITHWITH
GEOMETRISCHE DATEN GEOMETRIC DATA
BaugruppeBaugruppe Schwungrad-GehäuseSchwungrad-Gehäuse SchwungradSchwungrad AbmessungenAbmessungen AbmessungenAbmessungen Massenträgheitsmomente Massenträgheitsmomente MasseMasseDimension GroupDimension Group Flywheel housingFlywheel housing FlywheelFlywheel DimensionDimension DimensionDimension Mass moments of inertiaMass moments of inertia MassMass
SAE J617a SAEJ620 D4 D7 T2 D8 D9 D10 D14 D15 T1 D16 D24 D25 T5 D26 D27 L7 L11 L12 L13 L30 L31 L32 L33 J1 J2 m1 m2 mtotal
["] ["] [mm] [mm] [–] [mm] [mm] [mm] [mm] [mm] [–] [mm] [mm] [mm] [–] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kgm²] [kgm²] [kg] [kg] [kg]Teilung / holes Teilung / holes Teilung / holes
K 2810 3 11½ 120,00 101,50 8 10,10 75,00 295,86 352,40 333,40 8 11,00 451,00 428,60 12 11,00 409,58 3,00 16,30 12,00 2,00 110,00 39,70 3,50 1,50 0,050 0,020 3,4 6,8 15,2
K 3410 3 11½ 120,00 101,50 8 10,10 75,00 302,50 352,40 333,40 8 11,00 451,00 428,60 12 11,00 409,58 4,00 14,00 12,00 2,00 110,00 39,70 15,00 1,50 0,040 0,045 2,8 9,7 17,5
ØD
8+0.2
-0
ØD
9 h6
ØD
7 T2
ØD
4
L13
L12
ØD
26
L33
L32
L30 L31
L7
L11
ØD
16
ØD
10
ØD
15 T
1
Ø
D14
+0 -0.1
27
Ø
D27
+0 -0.1
27
ØD
25 T
5
ØD
24
12/2018
11VULKAN COUPLINGSINTEGRAL SHAFT SUPPORT
MITMIT WITHWITH
GEOMETRISCHE DATEN GEOMETRIC DATA
BaugruppeBaugruppe Schwungrad-GehäuseSchwungrad-Gehäuse SchwungradSchwungrad AbmessungenAbmessungen AbmessungenAbmessungen Massenträgheitsmomente Massenträgheitsmomente MasseMasseDimension GroupDimension Group Flywheel housingFlywheel housing FlywheelFlywheel DimensionDimension DimensionDimension Mass moments of inertiaMass moments of inertia MassMass
SAE J617a SAEJ620 D4 D7 T2 D8 D9 D10 D14 D15 T1 D16 D24 D25 T5 D26 D27 L7 L11 L12 L13 L30 L31 L32 L33 J1 J2 m1 m2 mtotal
["] ["] [mm] [mm] [–] [mm] [mm] [mm] [mm] [mm] [–] [mm] [mm] [mm] [–] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kgm²] [kgm²] [kg] [kg] [kg]Teilung / holes Teilung / holes Teilung / holes
K 2810 3 11½ 120,00 101,50 8 10,10 75,00 295,86 352,40 333,40 8 11,00 451,00 428,60 12 11,00 409,58 3,00 16,30 12,00 2,00 110,00 39,70 3,50 1,50 0,050 0,020 3,4 6,8 15,2
K 3410 3 11½ 120,00 101,50 8 10,10 75,00 302,50 352,40 333,40 8 11,00 451,00 428,60 12 11,00 409,58 4,00 14,00 12,00 2,00 110,00 39,70 15,00 1,50 0,040 0,045 2,8 9,7 17,5
12/2018
12 VULKAN COUPLINGS INTEGRAL SHAFT SUPPORT
INTEGRAL SHAFT SUPPORT VULASTIK LVULASTIK LMITMIT WITHWITH
GEOMETRISCHE DATEN GEOMETRIC DATA
BaugruppeBaugruppe Schwungrad-GehäuseSchwungrad-Gehäuse SchwungradSchwungrad AbmessungenAbmessungen AbmessungenAbmessungen Massenträgheitsmomente Massenträgheitsmomente MasseMasseDimension GroupDimension Group Flywheel housingFlywheel housing FlywheelFlywheel DimensionDimension DimensionDimension Mass moments of inertiaMass moments of inertia MassMass
SAE J617a SAEJ620 D4 D7 T2 GEW. D9 D14 D15 T1 D16 D24 D25 T5 D26 D27 L7 L12 L13 L30 L31 L32 L33 J1 J2 m1 m2 mtotal
["] ["] [mm] [mm] [–] [mm] [mm] [mm] [mm] [–] [mm] [mm] [mm] [–] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kgm²] [kgm²] [kg] [kg] [kg]Teilung / holes Teilung / holes Teilung / holes
X 2610 1 14 225,00 196,00 8 M16 140,00 466,70 438,20 8 14,00 552,00 530,20 12 11,50 511,18 62,00 16,00 4,00 225,00 25,40 20,00 5,00 0,29 0,22 6,6 36,9 91,2
X 3010 1 14 225,00 196,00 8 M16 140,00 466,70 438,20 8 14,00 552,00 530,20 12 11,50 511,18 80,00 16,00 4,00 225,00 25,40 20,00 5,00 0,35 0,27 8,1 39,5 91,7
X 3010 0 14 225,00 196,00 8 M16 140,00 466,70 438,20 8 14,00 711,00 679,45 16 13,50 647,70 80,00 16,00 4,00 325,00 25,40 20,00 5,00 0,35 0,30 8,0 52,2 154,9
X 3410 0 18 225,00 196,00 8 M16 140,00 571,50 542,90 12 17,00 711,00 679,45 16 13,50 647,70 109,00 16,00 4,00 325,00 15,90 20,00 5,00 1,45 0,85 21,3 78,1 197,4
X 4010 00 21 285,00 245,00 8 M20 175,00 673,10 641,40 12 17,00 883,00 850,90 16 15,00 787,40 130,00 22,00 5,00 375,00 – 20,00 5,00 3,27 1,84 35,5 126,0 352,5
X 4310 00 21 315,00 280,00 8 M22 175,00 673,10 641,40 12 17,00 883,00 850,90 16 15,00 787,40 170,00 22,00 5,00 440,00 – 20,00 5,00 4,44 2,58 48,1 162,2 366,2
min
. Ø
290
L12
L33
L32
L7
L31 L30
L13
GEW
.
ØD
9 h6
ØD
4
min.20
ØD
16
ØD
7 T2
ØD
26
ØD
15 T
1
ØD
14
+0 -0.1
27
ØD
27
+0-0
.127
-0.2
ØD
25 T
5
ØD
24
12/2018
13VULKAN COUPLINGSINTEGRAL SHAFT SUPPORT
MITMIT WITHWITH
GEOMETRISCHE DATEN GEOMETRIC DATA
BaugruppeBaugruppe Schwungrad-GehäuseSchwungrad-Gehäuse SchwungradSchwungrad AbmessungenAbmessungen AbmessungenAbmessungen Massenträgheitsmomente Massenträgheitsmomente MasseMasseDimension GroupDimension Group Flywheel housingFlywheel housing FlywheelFlywheel DimensionDimension DimensionDimension Mass moments of inertiaMass moments of inertia MassMass
SAE J617a SAEJ620 D4 D7 T2 GEW. D9 D14 D15 T1 D16 D24 D25 T5 D26 D27 L7 L12 L13 L30 L31 L32 L33 J1 J2 m1 m2 mtotal
["] ["] [mm] [mm] [–] [mm] [mm] [mm] [mm] [–] [mm] [mm] [mm] [–] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kgm²] [kgm²] [kg] [kg] [kg]Teilung / holes Teilung / holes Teilung / holes
X 2610 1 14 225,00 196,00 8 M16 140,00 466,70 438,20 8 14,00 552,00 530,20 12 11,50 511,18 62,00 16,00 4,00 225,00 25,40 20,00 5,00 0,29 0,22 6,6 36,9 91,2
X 3010 1 14 225,00 196,00 8 M16 140,00 466,70 438,20 8 14,00 552,00 530,20 12 11,50 511,18 80,00 16,00 4,00 225,00 25,40 20,00 5,00 0,35 0,27 8,1 39,5 91,7
X 3010 0 14 225,00 196,00 8 M16 140,00 466,70 438,20 8 14,00 711,00 679,45 16 13,50 647,70 80,00 16,00 4,00 325,00 25,40 20,00 5,00 0,35 0,30 8,0 52,2 154,9
X 3410 0 18 225,00 196,00 8 M16 140,00 571,50 542,90 12 17,00 711,00 679,45 16 13,50 647,70 109,00 16,00 4,00 325,00 15,90 20,00 5,00 1,45 0,85 21,3 78,1 197,4
X 4010 00 21 285,00 245,00 8 M20 175,00 673,10 641,40 12 17,00 883,00 850,90 16 15,00 787,40 130,00 22,00 5,00 375,00 – 20,00 5,00 3,27 1,84 35,5 126,0 352,5
X 4310 00 21 315,00 280,00 8 M22 175,00 673,10 641,40 12 17,00 883,00 850,90 16 15,00 787,40 170,00 22,00 5,00 440,00 – 20,00 5,00 4,44 2,58 48,1 162,2 366,2
12/2018
14 VULKAN COUPLINGS INTEGRAL SHAFT SUPPORT
INTEGRAL SHAFT SUPPORTBENÖTIGTE TECHNISCHE DATEN ZUR ÜBERPRÜFUNG DER LAGERBELASTUNGEN TECHNICAL DATA REQUIRED FOR THE VALIDATION OF THE BEARING LOADS
GELENKWELLE JA CARDAN SHAFT YES
Hersteller Gelenkwelle / Typ Manufacturer / Type
Art der Beugung Z oder W Deflection Z or W
Gelenkwellenlänge Lz Cardan shaft length Lz
Teilkreisradius der Verzahnung rm Pitch circle radius of splines rmBeugungswinkel β ° Deflection angle β °
Masse der Gelenkwelle m kg Mass of Cardan shaft m kg
Drehzahl n min-1 Speed n min-1
GELENKWELLE NEIN CARDAN SHAFT NO
Axialkraft Fa kN Axial force Fa kN
Radialkraft Fr kN Radial force Fr kN
Biegemoment Mb Nm Bending moment Mb Nm
MOTORTYP TYPE OF ENGINE
Art der Aufstellung starr starr Installation mode rigid resilient
Nennleistung Pn kW Nominal power Pn kW
Maximale Leistung Pmax kW Maximum power Pmax kW
Nenndrehzahl nN min-1 Nominal speed nN min-1
Maximale Drehzahl nmax min-1 Maximum speed nmax min-1
MOTORTYP TYPE OF ENGINE
Schwereinsatz / dauerhaft Heavy duty / continuous
Mittelschwerer Einsatz / häufig Medium duty / frequent
Leichter Einsatz / zeitweilig Light duty / occasional
Betriebsstunden / Jahr h Operation hours p. a h
Fr
Fa TN · n
Me
08/2016
15VULKAN COUPLINGSINTEGRAL SHAFT SUPPORT
ERLÄUTERUNGEN DES PRODUKTCODES EXPLANATIONS OF THE PRODUCT CODE
Alle VULKAN Couplings Produkte sind mit einem Produktcode gekennzeichnet.
Dieser Code setzt sich aus verschiedenen Parameter-Angaben zusammen und
ermöglicht es, unsere Produkte eindeutig zu identifizieren.
All VULKAN Couplings products are identified by a product code. This code con-
sists of several parameters and enables the clear identification of all products.
PRODUKTCODE BEISPIELTORFLEX
Hier haben wir den Code am Beispiel einer TORFLEX (KT 630),
Größe 21, Elementsteifigkeit 1 entschlüsselt dargestellt.
PRODUCT CODE EXAMPLETORFLEX
We have decoded the product code of a TORFLEX (KT 630),
Size 21, Element stiffness 1.
Komplettkupplung Produktfamilie Größenbezeichnung Elementsteifigkeit Baureihe Schwungrad SAE MaterialcodeComplete coupling Product family Size code Element stiffness Series Flywheel SAE Material code
1 KT 21 1 7 C A1 KT TORFLEX
TORFLEX21 1 7 ISS
ISSA 6,5" A Gummi
Rubber31 B 11,5"
41 C 14"
0 Nicht SAE Non SAE
07/2019
16 VULKAN COUPLINGS INTEGRAL SHAFT SUPPORT
INTEGRAL SHAFT SUPPORTERLÄUTERUNGEN DES PRODUKTCODES EXPLANATIONS OF THE PRODUCT CODE
Alle VULKAN Couplings Produkte sind mit einem Produktcode gekennzeichnet.
Dieser Code setzt sich aus verschiedenen Parameter-Angaben zusammen und
ermöglicht es, unsere Produkte eindeutig zu identifizieren.
All VULKAN Couplings products are identified by a product code. This code con-
sists of several parameters and enables the clear identification of all products.
PRODUKTCODE BEISPIELVULKARDAN E
Hier haben wir den Code am Beispiel einer VULKARDAN E (K 2814),
Größe 28, 1-reihig, Elementsteifigkeit 4 entschlüsselt dargestellt.
PRODUCT CODE EXAMPLEVULKARDAN E
We have decoded the product code of a VULKARDAN E (K 2814),
Size 28, 1 row, Element stiffness 4.
Komplettkupplung Produktfamilie Größenbezeichnung Elementreihen Elementsteifigkeit Baureihe Schwungrad SAE MaterialcodeComplete coupling Product family Size code Element rows Element stiffness Series Flywheel SAE Material code
1 K 28 1 4 7 C A1 K VULKARDAN E
VULKARDAN E28 1 1 REIHE
1 ROW4 7 ISS
ISSC 11,5" A Gummi
Rubber34 1 S Silikon
Silicone5
2
08/2016
17VULKAN COUPLINGSINTEGRAL SHAFT SUPPORT
Alle VULKAN Couplings Produkte sind mit einem Produktcode gekennzeichnet.
Dieser Code setzt sich aus verschiedenen Parameter-Angaben zusammen und
ermöglicht es, unsere Produkte eindeutig zu identifizieren.
All VULKAN Couplings products are identified by a product code. This code con-
sists of several parameters and enables the clear identification of all products.
PRODUKTCODE BEISPIELVULASTIK L
Hier haben wir den Code am Beispiel einer VULASTIK L (X 2611),
Größe 26, 1-reihig, Elementsteifigkeit 1, Ausführung 7 entschlüsselt dargestellt.
PRODUCT CODE EXAMPLEVULASTIK L
We have decoded the product code of a VULASTIK L (X 2611),
Size 26, 1 row, Element stiffness 1, Design 7.
Komplettkupplung Produktfamilie Größenbezeichnung Elementreihen Elementsteifigkeit Baureihe Schwungrad SAE MaterialcodeComplete coupling Product family Size code Element rows Element stiffness Series Flywheel SAE Material code
1 X 26 1 1 7 C A1 X VULASTIK L
VULASTIK L26 1 1 REIHE
1 ROW1 7 ISS (SAE Standard)
ISS (SAE standard)0 8" A Gummi
Rubber30 D DUAL
DUAL2 C ISS (SAE alternative Zuordnung)
ISS (SAE alternative assignment)A 10" S Silikon
Silicone34 3 B 11,5"
40 6 C 14"
43 8 D 18"
A E 21"
08/2016
18 VULKAN COUPLINGS INTEGRAL SHAFT SUPPORT
ONLINE-SERVICEWEITERE INFORMATIONEN FINDEN SIE AUF WWW.VULKAN.COM FOR FURTHER INFORMATION, PLEASE REFER TO OUR WEBSITE WWW.VULKAN.COM
AUTORISIERTE HÄNDLER www.vulkan.com/de-de/couplings/kontakt
AUTHORISED DISTRIBUTORS www.vulkan.com/en-us/couplings/contact
VIDEOS www.vulkan.com/de-de/couplings/
downloads-videos/videos
VIDEOS www.vulkan.com/en-us/couplings/ downloads-videos/videos
KATALOGE & BROSCHÜREN www.vulkan.com/de-de/couplings/
downloads-videos
CATALOGUES & BROCHURES www.vulkan.com/en-us/couplings/ downloads-videos
VULKAN ENGINEERING PORTALwww.vulkan.com/de-de/couplings/
service/vulkan-engineering-portal
VULKAN ENGINEERING PORTALwww.vulkan.com/en-us/couplings/ service/vulkan-engineering-portal
PRODUKTSELEKTORwww.vulkan.com/de-de/couplings/
service/produktselektor
PRODUCT SELECTORwww.vulkan.com/en-us/couplings/ service/product-selector
INTEGRAL SHAFT SUPPORT www.vulkan.com/de-de/couplings/produkte/
hochelastische-kupplungen/anflansch-außenlager
INTEGRAL SHAFT SUPPORT www.vulkan.com/en-us/couplings/products/highly-flexible-couplings/integral-shaft-support
19VULKAN COUPLINGSINTEGRAL SHAFT SUPPORT
GÜLTIGKEITSKLAUSEL
Die enthaltenen technischen Daten sind nur gültig bei Einsatz in defi-
nierten Anwendungsgebieten. Diese umfassen:
Haupt- und Nebenantriebe auf Schiffen
Generatorsätze auf Schiffen
Antriebe für stationäre Energieerzeugung mit Diesel- oder Gasmotoren
Abweichende Anwendungen bedürfen einer individuellen Betrachtung.
Bitte kontaktieren Sie hierzu ihren lokalen VULKAN Vertreter.
Die vorliegende Broschüre ersetzt alle vorherigen Ausgaben, ältere
Drucke verlieren ihre Gültigkeit. VULKAN ist berechtigt, aufgrund neuerer
Entwicklungen die in dieser Broschüre enthaltenen Daten entsprechend
anzupassen und zu verändern. Die neuen Daten gelten nur für nach
der Änderung bestellte Kupplungen. Es liegt im Verantwortungsbereich des
Anwenders dafür zu sorgen, dass ausschließlich die aktuelle Katalog-
version verwendet wird. Der jeweils aktuelle Stand ist auf der Webseite
von VULKAN unter www.vulkan.com jederzeit abrufbar.
Die Angaben in dieser Broschüre beziehen sich auf den technischen
Standard gültig im Hause VULKAN und stehen unter den in den Erläu-
terungen definierten Bedingungen. Es liegt allein im Entscheidungs- und
Verantwortungsrahmen des Systemverantwortlichen für die Antriebslinie,
entsprechende Rückschlüsse auf das Systemverhalten zu ziehen.
VULKAN Drehschwingungsanalysen berücksichtigen in der Regel nur das
rein mechanische Schwingungsersatzsystem. Als reiner Komponentenher-
steller übernimmt VULKAN mit der Analyse des Drehschwingungssystems
(stationär, transient) nicht die Systemverantwortung! Die Genauigkeit
der Analyse hängt von der Genauigkeit der verwendeten bzw. der
VULKAN zur Verfügung gestellten Daten ab.
Änderungen aufgrund des technischen Fortschritts sind vorbehalten.
Bei Unklarheiten bzw. Rückfragen kontaktieren Sie bitte VULKAN.
Stand: 07/2019
Das Recht auf Vervielfältigung, Nachdruck und Übersetzungen behalten
wir uns vor. Maß- und Konstruktionsänderungen vorbehalten.
VALIDITY CLAUSE
The containing technical data is valid only for defined areas of applica-
tions. These includes:
Main propulsion and auxiliary drives on ships
Generator sets on ships
Drives for stationary energy production with diesel or gas engines
For other than the named applications please contact your local
VULKAN supplier for further consideration.
The present catalogue shall replace all previous editions, any previous
printings shall no longer be valid. Based on new developments, VULKAN
reserves the right to amend and change any details contained in this
catalogue respectively. The new data shall only apply with respect to
couplings that were ordered after said amendment or change. It shall
be the responsibility of the user to ensure that only the latest catalogue
issue will be used. The respective latest issue can be seen on the website
of VULKAN on www.vulkan.com.
The data contained in this catalogue refer to the technical standard
as presently used by VULKAN with defined conditions according to
the explanations. It shall be the sole responsibility and decision of the
system administrator for the drive line to draw conclusions about the
system behaviour.
VULKAN torsional vibration analysis usually only consider the pure
mechanical mass-elastic system. Being a component manufacturer
exclusively, VULKAN assumes no system responsibility with the analysis
of the torsional vibration system (stationary, transiently)! The accuracy
of the analysis depends on the exactness of the used data and the data
VULKAN is provided with, respectively.
Any changes due to the technological progress are reserved. For ques-
tions or queries please contact VULKAN.
Status: 07/2019
All duplication, reprinting and translation rights are reserved. We reserve
the right to modify dimensions and constructions without prior notice.
www.vulkan.com
PUBLISHER:VULKAN Couplings
CONCEPT AND DESIGN:Hackforth Holding GmbH & Co. KGVULKAN MarketingHeerstraße 66, 44653 Herne / GermanyE-mail: marketing@vulkan.com
STATUS: 07/2019 All duplication, reprinting and translation rights are reserved. Any changes due to the technological progress are reserved. For questions or queries please contact VULKAN.