HALFEN POWERCLICK SYSTEM 41 + 22 - Portal de ......3 DN 15 DN 25 DN 80 DN 150 22 63 41 N N N N N...
Transcript of HALFEN POWERCLICK SYSTEM 41 + 22 - Portal de ......3 DN 15 DN 25 DN 80 DN 150 22 63 41 N N N N N...
MONTAGETECHNIK / FRAMING
HALFEN POWERCLICK SYSTEM 41 + 22
HALFEN POWERCLICKPOWERCLICK auf einen Blick POWERCLICK in One View
Noch nie war wenig so viel:
DREI GRÖSSEN - ein System
Never has so little given so much:
THREE SIZES - one system
POWERCLICK SYSTEM 63
Optimal bis DN 150, mit Einzelnach-weis bis DN 400Suitable for pipes with nominal diame-ters up to 150 mm or 400 mm onagreed applications
Kataloge PC 63 und PC 63-PCatalogues PC 63 and PC 63-P
POWERCLICK SYSTEM 41
Optimal bis DN 80, bei kleinen Stütz-weiten mit Einzelnachweis bis DN150Suitable for pipes with nominal diame-ters up to 80 mm or 150 mm withshort spans or agreed applications
Catalogue PC 41Katalog PC 41 /
POWERCLICK SYSTEM 22
Optimal bis DN 25Suitable for pipes with nominal diame-ters up to 25 mm
Katalog PC 41 / Catalogue PC 41
POWERCLICK ZUBEHÖRTEILEPOWERCLICK ACCESSORIES
Konsolen, Rohrschellen, GleitlagerCantilever arms, pipe clamps, Slidingsupports
Katalog PC Z / Catalogue PC Z
2
POWERCLICK SYSTEM 63
NEU
NEW
TÜV-GEPRÜFTNACH EN 13480(BAUMUSTERPRÜFUNG)TESTED TO EN 13480
(TYPE TESTING)BY TÜV
3
DN 15
DN 25
DN 80
DN 150
22
63
41
5 kN
5 kN5 kN
5 kN
5 kN
Profil/Channel63/63
Profil/Channel41/41
Profil/Channel41/22
3 Basisprofile3 Basic profiles
Schienenmuttermit "Biss"Channel nutwith "teeth"
HALFEN POWERCLICKEinfache und zeitsparende Montage Simple and Time Saving Assembly
Noch nie war wenig so viel
EIN KOMPATIBLES SYSTEM fürwirtschaftliche Unterstützungen
Never has so little given so much
ONE SYSTEM compatible with allchannels for economic support frames
1 Powerclickschraube1 Powerclick bolt
Bei Temperaturdehnung:Rohrgleitlager HRG-4 (Katalog PC Z)For thermal expansion:Sliding support HRG-4 (Catal. PC Z)
Katal./ PC ZCatal.
Bauteilanschlüsse Structural connections
Powerclick System 41 Powerclick System 41
HALFEN POWERCLICK
Seite/Page 6
Seite/Page 10
Seite/Page 11
Seite/Page 7
Seite/ 9Page
Seite/Page 12
Seite/Page 12
Katal./ PC ZCatal.
Seite/Page 10
Seite/Page9
Seite/Page 11
Seite/ 9Page
Seite/ 9Page
Seite/Page 10
Seite/Page 11 Seite/Page 13
Seite/Page 9
Seite/Page 6
Seite/ 10Page
Seite/Page 13
Seite/Page9
Seite/Page 11
Seite/Page 7
Seite/ 6Page
4
Katal./ PC ZCatal.
Seite/ 9Page
Seite/ 7Page
Seite/ 8Page
Seite/ 9Page
Katal./ PC ZCatal.
Seite/ 7Page
Seite/Page 8
Katal./ PC 63Catal.
Seite/ 9Page
Seite/ 6Page
Seite/ 7Page
Katal./ PC ZCatal.
Seite/ 8Page
Seite/ 13Page
HALFEN POWERCLICK
Bauteilanschlüsse Structural connections
Powerclick System 41 Powerclick System 41
Verfügbarkeit: Availability:
= Edelstahl 1.4571/1.4401 = Standard Standard= stainless steel grade 1.4571/1.4401
fv = - connection part ,zinc coating > 50 µmbolt connection ,chromatized, coating > 45 µmprofile , zinc coating > 50 µm
fv
- fv
- fv
➀
A4 A4
fv = Verbindungsteil ,Zinkauflage > 50 µmSchraubverbindung ,Zinkauflage > 45 µmProfil , Zinkauflage > 50 µm
- fv
- fv
- fv
➀
5
Werkstoff/Ausführung: Material/Finish:
fv= S 235JR feuerverzinkt (stückverz.) ➀fv = S 235JR hot-dip galvanized (piece galv.)➀
y z
yx z
zy
yzx
F
L [m]
41
41
9,5
2,5
229,5
7
HZL 41/41
14
HZL 41/41
28
50
ZahnungTeeth
Nennmaße/ [mm]Nominal dimensions
Das Profil ist durch formschlüssige Lastaufnahme für erhöhteBeanspruchung in Schienenlängsrichtung geeignet.Due to the toothed profile lips the channel is suitable for highloads in the longitudinal direction.
BezeichnungDesignation
BezeichnungDesignation
Bestell-Nr.Stock no.
Bestell-Nr.Stock no.
LieferlängeLength
Zubehör Accessories
ProfilChannel
ProfilabdeckungChannel closer strip
ProfilendstopfenChannel end cap
Werkstoff: PVC hart,Farbe weiß, temperatur-beständig -30° bis +90°C
Werkstoff: PVC,Farbe schwarz, temperatur-beständig -30° bis +90°C
Material: plastic (PVC),Colour: white, withstandstemperature -30° to +90°C
Material: ,Colour: black, withstandstemperature -30° to +90°C
plastic (PVC)
oder Bestell - Nr.or stock no.
Bestellbeispiel:Order example:
BezeichnungDesignation
Länge/ : mmlength 6000
fv = feuerverzinkt= hot-dip-galvanized
Mate-rial-aus-führ.
Mate-rial,
finish
Bestell -Nr.
Stockno.
Stan-dard
=
Profil-ge-
wicht
Channelweight
Profil-quer-
schnitt
Crosssection
Trägheits-moment
Widerstands-moment
Sectionmodulus
Moment ofinertia
Max.zul.Punkt-tragfähigkeit
Max. permiss.point loading
beiStützw.
atspan
Biegetragfähigkeitbei Spannweite L
Safe load at span L
- gezahnt, gelocht- toothed, slotted
Profil 41/41 Channel 41/41
Produktdaten Product Data
Montageschienen Powerclick System 41 Framing Channels Powerclick System 41
HALFEN POWERCLICK
A4 = Edelstahl A4= stainless steel grade A4
0283.010-.....
6000 mm
PA 41 -KS -3000
HPE 41/41
0321.000-00002
0318.000-00003
3000 mm
1001,500,50 1,00
F [kN]F [kN] F [kN]�
W[cm³]
zI[cm ]
z4
W[cm³]
yG[kg/m]
A[cm²]
I[cm ]
y4 L[cm]F [kN]
HZL 41/41
00002
00003
fv
A4
2,46 1,130,0 3,35,62,695,87 9,04 4,382,90 1,7
0283.010-00003
HZL 41/41 - A4 - 6000
6
HZM41/22 D
y z
yx z
zy
yzx
F
L [m]
41
41
9,5
2,5
229,5
7
HZM 41/22 D
HZM41/22 D
HZM41/22 D
Nennmaße/ [mm]Nominal dimensions
Das Profil ist durch formschlüssige Lastaufnahme für erhöhteBeanspruchung in Schienenlängsrichtung geeignet.Due to the toothed profile lips the channel is suitable for highloads in the longitudinal direction.
BezeichnungDesignation
BezeichnungDesignation
Bestell-Nr.Stock no.
Bestell-Nr.Stock no.
LieferlängeLength
Zubehör Accessories
ProfilChannel
ProfilabdeckungChannel closer strip
ProfilendstopfenChannel end cap
Werkstoff: PVC hart,Farbe weiß, temperatur-beständig -30° bis +90°C
Werkstoff: PVC,Farbe schwarz, temperatur-beständig -30° bis +90°C
Material: plastic (PVC),Colour: white, withstandstemperature -30° to +90°C
Material: ,Colour: black, withstandstemperature -30° to +90°C
plastic (PVC)
Mate-rial-aus-führ.
Mate-rial,
finish
Bestell -Nr.
Stockno.
Stan-dard
=
Profil-ge-
wicht
Channelweight
Profil-quer-
schnitt
Crosssection
Trägheits-moment
Widerstands-moment
Sectionmodulus
Moment ofinertia
Max.zul.Punkt-tragfähigkeit
Max. permiss.point loading
beiStützw.
atspan
Biegetragfähigkeitbei Spannweite L
Safe load at span L
Profil 41/22 D Channel 41/22 D
Produktdaten Product Data
HALFEN POWERCLICK
- gezahnt- toothed
ZahnungTeeth
Montageschienen Powerclick System 41 Framing Channels Powerclick System 41
0284.040-.....
oder Bestell - Nr.or stock no.
Bestellbeispiel:Order example:
BezeichnungDesignation
Länge/ : mmlength 6070
fv = feuerverzinkt= hot-dip-galvanized
A4 = Edelstahl A4= stainless steel grade A4 0284.040-00003
HZM 41/22 D - A4 - 6070
6070mm
PA 41 -KS -3000
HPE 41/22
0321.000-00002
0318.000-00004
3000 mm
1001,500,50 1,00
F [kN]F [kN] F [kN]�
W[cm³]
zI[cm ]
z4
W[cm³]
yG[kg/m]
A[cm²]
I[cm ]
y4 L[cm]F [kN]
HZM 41/22 D
00002
00003
fv
A4
3,58 1,130,0 3,35,62,685,64 11,00 5,334,66 1,7
7
kg
kg
100
Ø 14
100
4060
8
120
140100
Ø 14
100
4060
8
120
140
kg
kg
kg
kg
57/657/2
57/657/2
57/6
57/2
Stützenfuß: Beton- und Montageschienenanschluss Fixing Plate: Connection to Concrete and Framing Channel
Anwendungsbeispiele: Application Examples:
BezeichnungDesignation
BezeichnungDesignation
HALFEN POWERCLICK
Bestell-Nr.Stock no.
Bestell-Nr.Stock no.
Verbindungsteile Powerclick System 41 Fittings Powerclick System 41
6 Schrauben vormontiert2 Schrauben vormontiert
fv = feuerverzinkt, hot-dip galvanisedA4 = Edelstahl A4, stainless steel grade A4
2 bolts preassembled 6 bolts preassembled
HCS-VT41-57/2- fv
HCS-VT41-57/2-A4
HCS-VT41-57/6- fv
HCS-VT41-57/6-A4
0300.010-00023
0300.010-00022
10
10
10
10
0300.010-00026
0300.010-00025
8
9
65
LL13
×26
LL13
×26
6040
8
4
120
135100
kg
kg
6
13797
48
98
21
38
Ø 14
6
13797
48
98
21
38
Ø 14
kg
kg kg
kg kg
46/4s
46/4s
46/4v
46/4s
46/4v
46/4s
46/4v
46/4v
58/2
58/2
58/2
58/2
58/2
Betonanschluss Connection to Concrete
Anwendungsbeispiele: Application Examples:
BezeichnungDesignation
BezeichnungDesignation
BezeichnungDesignation
HALFEN POWERCLICK
Bestell-Nr.Stock no.
Bestell-Nr.Stock no.
Bestell-Nr.Stock no.
Verbindungsteile Powerclick System 41 Fittings Powerclick System 41
fv = feuerverzinkt, hot-dip galvanisedA4 = Edelstahl A4, stainless steel grade A4
T-Verbindermit4 Schrauben,vormontiert
T-Verbindermit4 Schrauben(davon 2 seitlich),vormontiert
T-connectorincl.4 boltspre-assembled
T-connectorincl.4 bolts(2 bolts side assembly)pre-assembled
Profilfußmit 2 Schrauben,vormontiert
Support baseincl. 2 bolts,pre-assembled
Träger- und Montageschienenanschluss Connection to Beam and Framing Channel
HCS-VT41-58/2- fv
HCS-VT41-58/2-A4
HCS-VT41-46/4v-fv
HCS-VT41-46/4v-A4
0300.010-00029
0300.010-00028
0300.010-00041
0300.010-00040
0300.010-00038
0300.010-00037
10
10
10
10
10
10
HCS-VT41-46/4s-fv
HCS-VT41-46/4s-A4
10
48
20104
20
6
41
48
20104
Ø14
20
6
41
19
1940
102
102
Ø14
6
40
47
kg
kg
kg
kg
kg
kg
kg
26/3
26/3
26/3
84/4
84/4
26/1
84/4
84/4
84/4
26/3
26/3
26/1
26/3
Eckverbindermit 4 Schrauben,vormontiert
Angleincl. 4 bolts,preassembled
90° Winkel mit1 Schraube,vormontiert
90° Winkel mit3 Schrauben,vormontiert
Hinweis: Bei Mon-tage mit Steck-schlüssel HCS-VT41-84 bevorzugen!
Montageschienenanschlüsse Connection to Framing Channel
Anwendungsbeispiele: Application Examples:
BezeichnungDesignation
BezeichnungDesignation
BezeichnungDesignation
HALFEN POWERCLICK
Bestell-Nr.Stock no.
Bestell-Nr.Stock no.
Bestell-Nr.Stock no.
Verbindungsteile Powerclick System 41 Fittings Powerclick System 41
fv = feuerverzinkt, hot-dip galvanisedA4 = Edelstahl A4, stainless steel grade A4
90° Angleincl. 1 bolt,preassembled
90° Angleincl. 3 bolts,preassembled
If using socketwrench for assem-bly, prefere typeHCS-VT 41-84
HCS-VT41-26/1- fv
HCS-VT41-26/1-A4
HCS-VT41-26/3-fv
HCS-VT41-26/3-A4
0300.010-00005
0300.010-00004
0300.010-00008
0300.010-00007
0300.010-00035
0300.010-00034
10
10
10
10
10
10
HCS-VT41-84/4-fv
HCS-VT41-84/4-A4
< 120 mm� 120 mm� 120 mm
HCS-VT 41-27/3
� 120 mm � 120 mm < 120 mm
Ø14
99
20 4
8
137
4848
48
6
Ø14
99
20 4
8
137
4848
48
6
164
76
4820 6
kgkg
27/1
27/1
22/3
27/3
27/1
BezeichnungDesignation
BezeichnungDesignation
BezeichnungDesignation
Bestell-Nr.Stock no.
Bestell-Nr.Stock no.
Bestell-Nr.Stock no.
Connection to framing channel:Flat plate incl.3 channel nutsand set screws,preassembled
Aussteifungs-winkel mit3 Schrauben,vormontiert
Montagevarianten:Modifications:
Beton- und Montageschienenanschluss Connection to Concrete and Framing Channel
Anwendungsbeispiele: Application Examples:
HALFEN POWERCLICK
fv = feuerverzinkt, hot-dip galvanisedA4 = Edelstahl A4, stainless steel grade A4
HCS-VT 41-68/2Seite/ 21� page
HCS-VT 41-26/3Seite/ 10� page
Anbindung der Aussteifung am Träger (Flanschbreite):Connection of the bracing to the beam (flange width):
90° Angleincl. 3 channel nutsand set screws,preassembled
Montageschienenanschluss:Aussteifungsplattemit 3 Schrauben,vormontiert
Aussteifungs-winkel mit1 Schraube,vormontiert
90° Angleincl. 1 channel nutand set screw,preassembled
Verbindungsteile Powerclick System 41 Fittings Powerclick System 41
HCS-VT41-27/1- fv
HCS-VT41-27/1-A4
HCS-VT41-27/3-fv
HCS-VT41-27/3-A4
0300.010-00011
0300.010-00010
0300.010-00002
0300.010-00001
10
10
10
10
10
10
HCS-VT41-22/3-fv
HCS-VT41-22/3-A4
0300.010-00014
0300.010-00013
11
kg
kg
kg
kg
Ø14
4848
48184 543
6
138
96Ø14
41
BezeichnungDesignation
BezeichnungDesignation
Bestell-Nr.Stock no.
Bestell-Nr.Stock no.
fv = feuerverzinkt, hot-dip galvanisedA4 = Edelstahl A4, stainless steel grade A4
U-Bügelmit3 Schrauben,vormontiert
Spliceincl. 4 channel nuts,preassembled
Montageschienenanschluss Connection to Framing Channel
Anwendungsbeispiele: Application Examples:
HALFEN POWERCLICKVerbindungsteile Powerclick System 41 Fittings Powerclick System 41
Montageschienenstoß Connection to Framing Channel
U-shape fittingincl. 3 channel nuts,preassembled
Profilverbindermit4 Schrauben,vormontiert
HCS-VT41-47/3- fv
HCS-VT41-47/3-A4
HCS-VT41-77/4- fv
HCS-VT41-77/4-A4
0300.010-00020
0300.010-00019
10
10
10
10
0300.010-00032
0300.010-00031
12
77/4
47/3
47/3
×
75
6
22
8565
h
L
70 mm 70 mm
kg
41/41
41/22 D
Trägerklemme
Anwendungen: Applications:
BezeichnungDesignation
HALFEN POWERCLICK
Bestell-Nr.Stock no.
Verbindungsteile Powerclick System 41 Fittings Powerclick System 41
fv = feuerverzinkt, hot-dip galvanised
A4 = Edelstahl A4, stainless steel grade A4
Beam Clamp Passend zu Profilen:Fits for channels:
Träger - Flanschbreite [mm]Beam - flange width [mm]
Träger - Flanschbreite [mm]Beam - flange width [mm]
75 - 300
Flanschdicke [mm]Flange thickness [mm]
Flanschdicke [mm]Flange thickness [mm]
Leitung DehnungohnePipe expansionwithout
Leitung DehnungmitPipe expansionwith
� oben/Best.-Nr./
aboveOrder No
0312.030-00042
� oben/Best.-Nr./
aboveOrder No
0312.030-00085
Auswahl Trägeranschlüsse: Selection of beam connections:
Trägerklemme: Trägeranschluss Beam Clamp: Connection to Steel Beam Montagehinweis: Note for assembly:
� oben/Best.-Nr./
aboveOrder No
0312.030-00042
� oben/Best.-Nr./
aboveOrder No
0312.030-00085
alternat.75 - 300alternat.
Trägerklemme, Einsatz paarweiseTragfähigkeit pro Klemme: 2,3 kN
Beam clamp used in pairsBearing capacity per clamp: 2,3 kN
HVT 41-85-fv
HVT 41-85-A4
HVT41-85- fv
HVT41-85-A4
0312.030-00042
0312.030-00085
50
50
10 - 22
Bestellen Sie:To order:
Bestellen Sie:To order:
Bestellen Sie:To order:
Bestellen Sie:To order:
HVT 41-85-A4
5 - 4010 - 22 5 - 40
L
h
Trägerflanschbreite + (2 × 70 mm)beam flange width + (2 × 70 mm)
Flanschdicke Flange thickness= 10-22 mm
120120
13
➀
➁
➀
➀
➁+
➀ +
➀
Best.-Nr./Order No0308.030-00001
HCS-TK-fv➀
Best.-Nr./Order No0323.010-00008
HZS41/41-gv-M12×100➁
HVT 41-85-fv➀
Best.-Nr./Order No0308.030-00001
HCS-TK-fv➀
Best.-Nr./Order No0323.010-00008
HZS41/41-gv-M12×100➁
kg
2,3 kN 2,3 kN
F maxz F maxz F maxz
Fy
F maxz
Fy
60 Nm (Stahl)55 Nm (Edelstahl A4)PowerclickschraubePowerclick bolt
100 kg1 kN
Nenn-durch-messer
Nominaldiameter
Außen-durch-messer
Outsidediameter
Wand-stärke
Wallthickness
Leeres Rohr ohne Dämmung
Empty pipe without isolation
wassergefüll. Rohr Dämmdik-ke DD 40 water filled pipe
isolation thickness 40 mm
wassergefüll. Rohr Dämmdik-ke DD 80 water filled pipe
isolation thickness 80 mm
wassergefülltes
water filled pipe withoutisolation
Rohr ohneDämmung
Max. empfohl.Stützabstand
Max. empfohl.Stützabstand
Max. recomm.support spacing
Max. recomm.support spacing
Gewichte und max. Stützabstände von Stahlrohrleitungen Weights and max. support spacings of steel pipes
Angaben in Anlehnung an TRR 100 Values are approximately as per TRR 100
HALFEN POWERCLICKStatik Powerclick System 41 Load information for Powerclick System 41
Berechnungsgrundlage Basis of calculation
Anzugsdrehmomente Torque
Nachweis nach Regeln des allgemeinenStahlbaus: DIN 18800
Calculations are in accordance with therules of general steel construction andDIN 18800
[kg/m]
9,69
12,17
14,81
21,89
29,88
39,31
51,84
7,64
[m]
1,80
2,30
2,70
3,80
4,20
4,50
4,90
1,30DN 15
DN 150
DN 125
DN 100
DN 80
DN 50
DN 40
DN 25
[mm]
33,7
48,3
60,3
88,9
114,3
139,7
168,3
21,3
[mm]
2,6
2,6
2,9
3,2
3,6
4,0
4,5
2,0
[kg/m]
2,01
2,95
4,13
6,81
9,89
13,47
18,29
0,96
[m]
2,15
2,60
3,00
3,80
4,20
4,50
4,90
1,70
[kg/m]
2,64
4,41
6,46
12,15
18,90
27,09
38,22
1,19
[kg/m]
5,54
7,76
10,18
17,25
24,86
33,91
46,00
3,71
14
kg
F maxz
kg
F maxz
kg
F maxz
kg
F maxz
kg
F maxz
kg
F maxz
kg
F maxz
Fy Fx
kg
F maxz
Fy Fx
kg
F maxz
Fy Fx
kg
F maxz
Fy Fx
kg
F maxz
Fy Fx
kg
F maxz
Fy Fx
z
x
z
xy
kg
H=m
ax.8
00
L
kg
H=m
ax.8
00
L
kgH=m
ax.8
00
L
kg kg
H80
0
[mm
]
L/2 L/2
kg
L/3L/3 L/3
kg kg
kg kgkg
L/4L/4 L/4 L/4
kg kg kg kg
L/5L/5 L/5 L/5 L/5
kg kg kg kg kg
L/6L/6L/6 L/6 L/6 L/6
BetonConcrete
TrägerBeam
Anbindung an Baukörper:Fixing conditions:
Profile:Channel:
Zulässige Betriebslast [kN] bei Stablänge L [mm]:Fzmax
Erläuterungen: = Einzelkraft pro Lasteinleitung(z.B. Leitungen ohne Dehnung)
(z.B. Leitungen mit Dehnung oder Windlasten)
Aussteifungen sind bei Nichteinhaltung der statischen Vorgaben, z.B.H > 800 mm, notwendig.Bracings are required when exeeding the static limits, e.g. when H > 800 mm.
HALFEN POWERCLICKStatik Powerclick System 41 Load information for Powerclick System 41
Zul. Betriebslasten F max für Rahmenkonstruktionenz Rated loads F max per for frameworkz
Rated load [kN] for channel length L [mm]:Fzmax
= point load without lateral forces(e.g. pipes without expansion)
(Point loads with lateral forces)
Explanations:
= aus Überlagerung / SuperpositionF oder/ F = 0,3 × F maxx y zor
HZM 41/22 DHZL 41/41
L = 600
F [kN]z
L = 400
F [kN]z
L = 800
F [kN]z
L =1000
F [kN]z
L =1200
F [kN]z
L =1400
F [kN]z
L =1600
F [kN]z
1,09
0,99
0,69
0,69
0,50
0,50
0,38
0,38
0,32
0,32
1,24
1,13
0,90
0,85
0,62
0,57
0,49
0,47
0,41
0,38
1,45
1,32
1,08
0,99
0,72
0,66
0,60
0,55
0,48
0,44
1,74
1,58
1,30
1,18
0,87
0,79
0,72
0,65
0,58
0,52
2,17
1,98
1,62
1,30
1,09
0,87
0,90
0,65
0,72
0,52
2,88
2,60
2,14
1,30
1,45
0,87
1,20
0,65
0,97
0,52
4,29
2,60
3,16
1,30
2,17
0,87
1,79
0,65
1,45
0,52
15
Die Befestigung mittels Dübel und Verbundanker muss bauseits nachgewiesenwerden.Fixings using site drilled bolts and adhesion anchors may need site testing.
kg
F maxz
kg
F maxz
Fy Fxz
xy
kg
F maxz
kg
F maxz
Fy Fx
z
x
kg kg
H
kg
H
Erläuterungen: = Einzelkraft pro Lasteinleitung(z.B. Leitungen ohne Dehnung)
(z.B. Leitungen mit Dehnung oder Windlasten)
= point load without lateral forces(e.g. conduits without expansion)
(Point loads with lateral forces)
Explanations:
= aus Überlagerung / SuperpositionF oder/ F = 0,3 × F maxx y zor
BetonConcrete
TrägerBeam
HALFEN POWERCLICKStatik Powerclick System 41 Load information for Powerclick System 41
Zul. Betriebslasten F max für freistehende Unterstützungz Rated loads F max per for Freestanding Supportz
Anbindung an Baukörper:Fixing conditions:
Profil:Channel:
Zulässige Betriebslast [kN] bei Stablänge H [mm]:Fzmax
Rated load [kN] for channel length H [mm]:Fzmax
H = 600
F [kN]z
H = 700
F [kN]z
H = 800
F [kN]z
H = 900
F [kN]z
H = 1000
F [kN]z
H = 1200
F [kN]z
Außermittige Lasteinleitung ± 50 mmLoads ± 50 mm eccentricity
HZM 41/22 DHZL 41/41
3,14
0,60
3,77
0,85
4,19
1,04
4,71
1,30
5,39
1,62
6,28
1,87
16
Die Befestigung mittels Dübel und Verbundanker muss bauseits nachgewiesenwerden.Fixings using site drilled bolts and adhesion anchors may need site testing.
N
Q
N
Q
N
Q
N
Q
N
N
Q
N
Q
N
N
Q
N
Q
N
N
N
N
M
N
N
Q
M
N
Q
M
Typ/ :TypeHCS-VT41-58
Typ/ :TypeHCS-VT41-46
Typ/ :TypeHCS-VT41-57
Typ/ :TypeHCS-VT41-26
Typ/ :TypeHCS-VT41-84
Düb
elan
bind
ung
Max. Schnittgrößen bei Gebrauchslast für Verbindungsteile Max. Cross Sectional Loads for Connection Parts
Empfohlene max. WerteRecommended max. loads
Empfohlene max. WerteRecommended max. loads
Tragfähigkeit ist durch Anbindung mit Klemme HVT 41-85 an Stahlträger begrenzt
HALFEN POWERCLICKStatik Powerclick System 41 Load information for Powerclick System 41
Load capacity is limited due to connection to steel beam by clamp type HVT 41-85
Tragfähigkeit ist durch Anbindung mit HALFEN Verbundanker Typ VA anBeton B 25 begrenztLoad capacity is limited due to connection to concrete grade 25 N/mm byHALFEN chemical anchor Type VA.
2
±Q[kN]
±Q[kN]
±N[kN]
±N[kN]
±M[kNcm]
±M[kNcm]
HCS-VT41-27
HCS-VT41-22
HCS-VT41-47
HCS-VT41-77
HCS-KON-Z1
–
–
–
3,5
1,0
–
3,5
3,5
7,5
-
-
-
-
-
-
-
-
30
1,1
1,1
2,25
2,25
-
-
-
-
-
5,0
5,0
7,5
7,5
5,0
5,0
5,0
7,5
-
± 20,00± 5,50
± 20,00± 5,50
± 3,00± 5,00
± 3,00± 5,00
± 3,00± 5,00
± 3,00± 5,00
40,0
40,0
–
–
–
–
0,75
0,75
–
0,5
0,5
–
2,50
2,50
7,5
3,0
3,0
4,6
17
Die Befestigung mittels Dübel und Verbundanker muss bauseits nachgewiesenwerden.Fixings using site drilled bolts and adhesion anchors may need site testing.
Anwendungsbeispiele Powerclick System 41 Application Examples of Powerclick System 41
Die Anwendungsmöglichkeiten des Powerclick-Systemssind zahlreich. Die Abbildungen zeigen ausgeführteBeispiele.
HALFEN POWERCLICK
The applications of the Powerclick-System are numerous.The pictures show some examples.
18
HALFEN POWERCLICKPowerclick System 22 Powerclick System 22
19
Powerclick System 22
Powerclick System 22
Seite/Page 21
Seite/Page 21
Seite/ 9PageSeite/Page 21
Seite/Page 13
Seite/Page9
Bauteilanschlüsse Structural connections
HALFEN POWERCLICKPowerclick System 22 Powerclick System 22
Seite/Page 13
Seite/Page 9
20
y z
yx z
zy
yzx
F
L [m]
41
21
9,5
2,5
229,5
7
14
HZL 41/22
28
50
HZL 41/22
20
57
20
6
41
A4 = Edelstahl A4, stainless steel grade A4fv = feuerverzinkt, hot-dip galvanised
1
1
0300.010-00043
0300.010-00044
HCS-VT41-68/2-fv
HCS-VT41-68-2-A4
Bestell-Nr.Stock no.
BezeichnungDesignation
- gezahnt, gelocht- toothed, slotted
atspan
beiStützw.
Safe load at span L
Biegetragfähigkeitbei Spannweite L
Max.zul.Punkt-tragfähigkeit
Max. permiss.point loading
Sectionmodulus
Widerstands-moment
Moment ofinertia
Trägheits-moment
Profil-quer-
schnitt
Crosssection
Channelweight
Profil-ge-
wicht
Stan-dard
=
Bestell -Nr.
Stockno.
Mate-rial,
finish
Mate-rial-aus-führ.
ProfilChannel
LieferlängeLength
Bestell-Nr.Stock no.
BezeichnungDesignation
Material: plastic (PVC),Colour: white, withstandstemperature -30° to +90°C
Werkstoff: PVC hart,Farbe weiß, temperatur-beständig -30° bis +90°C
ProfilabdeckungChannel closer strip
Bestell-Nr.Stock no.
BezeichnungDesignation
Material: ,Colour: black, withstandstemperature -30° to +90°C
plastic (PVC)
Werkstoff: PVC,Farbe schwarz, temperatur-beständig -30° bis +90°C
ProfilendstopfenChannel end cap
HALFEN POWERCLICKMontageschienen Powerclick S Framing Channels Powerclickystem 22 System 22
Produktdaten Product Data Zubehör Accessories
Nennmaße/ [mm]Nominal dimensions
Die Profile sind durch formschlüssige Lastaufnahme für erhöhteBeanspruchung in Schienenlängsrichtung geeignet.Due to the toothed channel lips the profiles are suitable for highloads in the longitudinal direction.
ZahnungTeeth
Profil 41/22 Channel 41/22
Montageschienenanschlüsse Connection to Framing Channel
90° Winkel mit2 Schrauben,vormontiert
90° Angleincl. 2 bolts,preassembled
0283.020-.....
PA 41 -KS -3000
HPE 41/22
0321.000-00002
0318.000-00004
3000 mm
100
1,500,50 1,00
F [kN]F [kN] F [kN]�
W[cm³]
zI[cm ]
z4
W[cm³]
yG[kg/m]
A[cm²]
I[cm ]
y4 L[cm]F [kN]
HZL 41/22
00002
00003
fv
A4
1,57 0,29,0 1,15,60,860,97 5,15 2,491,87 0,5
6000mm
21
HZL 41/22
Länge/ : mmlength 6000
fv = feuerverzinkt, hot-dip-galvanizedA4 = Edelstahl A4, stainless steel grade A4
oder Bestell - Nr.or stock no.
Bestellbeispiel:Order example:
BezeichnungDesignation
0283.020-00003
HZL 41/22 - A4 - 6000
HALFEN POWERCLICK
22
Individuelle BeratungIndividual advice
• durch unser KompetenzCenterMontagetechnik• Powerclick-Fachberatung vor Ort• Konstrukteurs- und Montage-schulung• Montagebetreuung
HALFEN POWERCLICKDas POWERCLICK-Service-Paket The POWERCLICK System Service
KatalogCatalogue
• Minimum an Bauteilen - Maximuman Lösungen.
• Komplettlösungen• Neue Statik - räumlich gerechnet!
• Complete solutions• Load calculations and solutions shownthree dimensionally!• The best solutions with the least num-ber of parts.
• from our technical advisory centre forFraming Systems• Technical advice on site• Training for design and assembly• Assembly advice
HardwareHardware
ormontierte Verbindungsteile• Wenige, v• Leichtgewichte mit hoher Tragfähigkeit• Lagerhaltend
• Pre-assembled fittings• Lightweight components with goodload capacity• All components in stock
Produkt + Support Product + Support
BauteilbibliothekenCAD-libraries
• DWG- und DXF-Format• Rahmen, Stützen und Kragarme sind
als Komplettkonstruktionenabrufbar
HALFEN POWERCLICKDas Powerclick Service Paket The Powerclick System Service
Software für 2-dimensionale Planung Software for 2-dimensional planning
Software für 3-dimensionale Planung Software for 3-dimensional planning
• DWG- and DXF-formats• Frames, supports and cantilever arms
are available as complete structures
MS-Expert• Interaktiver Produktkatalog• Erstellung von Stücklisten und
Massenauszügen
• Interactive products catalogue• Parts lists and amounts can easily be
established.
HALFEN-PowerCAD• Powerclick System 41-Bibliothekenfür PDMS und PDS
• Powerclick system 41-libraries forPDMS and PDS
23
HALFEN-DEHA Vertriebsgesellschaft mbH · Liebigstraße 14 · D - 40764 LangenfeldTelefon: + 49 (0) 2173-970-0 · Telefax: + 49 (0) 2173-970-123 · www.halfen-deha.de
M-049-12/03
11.0
0012
/03
KONTAKT / CONTACT
HALFEN-DEHA MontagetechnikDeutschland
HALFEN-DEHA Framing SystemsInternational
Telefon: 02173/970-335Telefax: 02173/970-349E-Mail: [email protected]
Phone: 0049/2173/970-831Fax: 0049/2173/970-849E-Mail: [email protected]
Technische und konstruktive Änderungen vorbehalten
Subject to technical and constructional alterations
Die Informationen in diesem Druckerzeugnis basieren auf dem uns bekannten Stand der Technik zur Zeit der Drucklegung. Technische undkonstruktive Änderungen bleiben zu jeder Zeit vorbehalten. HALFEN-DEHA übernimmt in Bezug auf die Richtigkeit der Angaben in diesemDruckerzeugnis und eventuelle Druckfehler keinerlei Haftung.
The information in this printed material is based on latest technical developments known to us at the time of printing. Subject to technical andconstructional alterations at any time. HALFEN-DEHA does not accept responsibility referring to the accuracy of the information in this printedmaterial and for possible misprints.
Das HALFEN-DEHA Qualitätsmanagementsystem ist für die Standorte in Deutschland und der Schweiz zertifiziert nach DIN EN ISO 9001 (Zertifikat-Nr. QS-281 HH)
The HALFEN-DEHA Quality Management System is certified for the locations in Germany and Switzerland according to DIN EN ISO 9001 (Certificate-No. QS-281 HH)
HINWEIS ZU DIESEM KATALOG
COMMENT REGARDING THIS CATALOGUE
Allgemeine Produktinformationen zu dem Powerclick System 63 enthält der Katalog PC 63-P.Detaillierte Informationen, technische Daten und Belastungstabellen zu diesem System,finden Sie in dem Katalog Technische Information PC 63.
General product informations concerning the Powerclick System 63 you can find in our brochurePC 63-P. The catalogue Technical Information PC 63 offers you detailed information, technicaldata and load tables for this system.
Der Katalog PC Z enthält alle erforderlichen Informationen zu dem Powerclick Zubehör.
The catalogue PC Z offers you technical information for Powerclick Accessories.
WEITERE KATALOGE / FURTHER CATALOGUES
© 2
003
HA
LFEN
-DEH
A V
ertr
iebs
gese
llsch
aft
mbH
,ap
plie
s al
so t
o co
pyin
g in
ext
ract
s©
200
3 H
ALF
EN-D
EHA
Ver
trie
bsge
sells
chaf
t m
bH,
gilt
auc
h fü
r au
szug
swei
se V
ervi
elfä
ltig
ung