CONNECTORS EUROPE

ARK-LESC O N N E C T O R S

PAKTRONC A P A C I T O R S

E U R O P ECONNECTORS EUROPE

CONNECTORS EUROPE

Fields of Activities:We are specialized in connectors for Printed Circuit Boards and Flat Cable connec-tions in the following application fi elds and areas: Customized Connector solutions Automotive Customized Connector solutions Industrial Standard Industrial Connectors (i.e. DIN EN 60603-2 / DIN 41612 and DIN EN 60603-12 / DIN 41651) HI-CON / LAT-CON Board-to-Wire IDC Connections for Flat Cable and Single Wire (MAS-CON) Board-to-Board Pin Header & Sockets from 0.8 to 5.08mm pitch Press-In Technology Standard & Customized high precesion connectors for discrete wire terminations for power applications. (ARK-LES) Ultra Low ESR multilayer polymer fi lm capacitors for industrial applications (Angstor / Capstick/ Quencharc/ Surfi lm) (Paktron) A complete range of own tools guarantees easy handling during the application of our connector products We manufacture within the whole range from smallest series via medium lot sizes up to fully automated high volume production, according to the needs of our customers, often connected to extreme Zero-Defect- and On-Time-Delivery-requirements.Sales/Marketing, Engineering and Headquarter are located in Neu-Anspach, Germany. We manufacture, based on the individual customer demand, in our plants in central Europe (Slovenia / www.pancon.de/SLO/), as well as in the USA and Asia.Our Quality Management System is certifi ed according to DIN EN ISO9001 and in 2010 according to ISO TS16949.

HistoryPancon GmbH in Neu-Anspach / Germany designs manufactures and markets electro-mechanical components since 1968. From 1968 to 1997 we were known as Panduit´s Connector Division of Panduit/USA. In 1997 we became a part of ITW/USA until October 2011. In October 2011 we were acquired by Milestone Partners (www.milestonepartners.com) and Pancon Corporation (www.panconcorp.com) was founded with the following companies: Pancon Connectors Europe (www.pancon.de) Pancon Connectors USA (www.panconconnectors.com) Paktron Capacitors (www.paktron.com) ARK-LES Connectors (www.ark-les.com)Pancon GmbH (Pancon Corporation Europe) is responsible for marketing and sup-porting all of the products of Pancon Corporation within Europe and the Middle East.

Business Philosophy Mission: Pancon is a market-focused company and achieves its European wide

goals with qualifi ed distribution partners, direct support of OEM customers and the high quality of its products and the ideas of its motivated and highly qualifi ed employees.

Strategy: Excellent customer support and supply service, support and stock availability Specialization and concentration on selected customers & markets Quality without compromise, certifi ed according to DIN ISO since 1993, TS 16949 in 2010 Fastest prototype service for customized products Delivery of smallest quantities up to high volume production Supply of complete solutions, ready to be installed The motivation and qualifi cation of our employees are the keys to our success

CONNECTORS EUROPE

Quality PolicyPancon‘s quality target is to fulfi ll 100% of the agreed and accepted requirements of our customers in all sections of the organization. We consistently fulfi ll our customer's requirements.

In the context of Total Quality Management (TQM) we will: Involve all employees in idea identifi cation and problem solving Provide initial samples in line with the automotive procedures Effective Defect and Complaints Management Align all workfl ow in order to achieve optimized business processes Avoid errors and any waste Direct us through a continuous improvement process to meet constantly changing customer requirements.

Our commitment to Quality and the satisfaction of our customers is the reason for our prominent position in our selected key markets; it secures our competitive-ness and the future of the Company.

Competence and Quality

Competence1. Complete handling of projects

(competence centre Europe with worldwide resources)

Product development Prototype services on customized design Pilot lot series Series production from quantity 1 to highly automated production

2. Team-oriented employees Many years of experience Constant adaption of qualifi cation as consequence of growing demands

3. Quality: ISO 9001 for all locations TS16949 for our manufacturing plant in Slovenia with its head- quarter in Germany and for Taiwan pursued Zero Defect Strategy

4. Process reliable manufacturing plants

Slovenia (Maribor) USA (Taunton MA, Lynchburg VA, Temecula CA) Taiwan (Kaohsiung) China (Dongguan)

Quality Policy

TS16949 for our manufacturing plant in Slovenia with its head- quarter in Germany and for

CONNECTORS EUROPE

Product Line HI-CONConnectors for 19" Racks and PCB Application acc. to DIN EN 60 603-2 (DIN 41612) B, B 1/2, C, C ½, C 1/3, D, E, F, H15, Q, R Termination methods are Solder, PressFit, Wire-Wrap and IDC-connection

Product Line LAT-CONSystem of connectors for fl at cable applications with wire sizes AWG 28 for fl at cable & PCB applications Box Headers 1.27/2.00/2.54mm Latch Headers 1.27/2.00/2.54mm IDC Sockets 1.27/2.00/2.54mm PCB Transition Connectors 1.27/2.00/2.54mm

Product Line MAS-CONA System of IDC-connectors for single and fl at cables Sockets: delivered as end or through connectors Number of poles: Series 100, 2 to 28-poles Series 156, 2 to 24-poles Pitch: Series 100, 2.54 mm Series 156, 3.96 mm Connection method of female part: IDC-termination Series 100: AWG 28 to AWG 22 Series 156: AWG 24 to AWG 18 Connection method of male part: Solder/PressFit A wide variaty of application tools for effective mass production is available Secure contact with our 4-zone gas tight IDC-connection

IDC-connection

Product Line Power Connectorsfor discrete wire terminationsMale / Female Quick Connects, Spades & Rings, Splices, and Stationary (rivetable) terminals.QUICK CONNECTS: Non Insulated / Partially Insulated / Fully InsulatedRINGS AND SPADES: Non Insulated / Partially InsulatedSPLICES: Broached and Unbroached Splice Terminals.STATIONARY: Male One-Way / Male/Female PCB Mount / Female, Male/FemaleScrew Type, & Adaptors

Product Line Capacitors• Ultra Low ESR • High Frequency • High Ripple Current • Long Life Angstor® Miniature Radial Capstick® Lead-Framed MLP Surfi lm® Surface Mount Chip Quencharc® R-C Network/Snubber

ARK-LESC O N N E C T O R S

PAKTRONC A P A C I T O R S

Automotive Solutions:Customized Connectors, housings and individual solutions: Development, Project Management, Production and logistic Services Trought-Hole-Refl ow and SMD versions Packing in Tape & Reel, Tubes or Bags Selective confi guration of contact layout in connectors, also with mixed Power and Signal Contacts Special Housings (upper and lower part) taking in mind the counterpart of the customers and interfacing with existing components Projects with fi rst and second tier suppliers such as Brose, Bitron, NIDEC, Automotive Lighting, Bosch, Zollner, Hella, Methode Electronics and through distributionPressFit Solutions consisting of: Pancon Needle Eye Design In line with stringent automotive requirements Stamped PressFit Zone 0.63 / 0.80 /... High Temp. Application - 40 to + 150 degree C°

Customized Pin Header & Sockets Designed for wave soldering, THR and SMT they feature customer-specifi c dimensions and different contact plating’s. Available on request, the headers and sockets are offered in pitch sizes from 0.8 mm x 1.2 mm up to 5.08 mm. The wide range of styles, including single, dual, triple and quad row, straight or right angle, provides a high level fl exibility for many applications. Packing: PE bag / Tube + cap / Tape & reel with cap

Pancon GmbHSiemensstrasse 7, D-61267 Neu-AnspachTel.: ++49 (0) 6081 / 964-0, Fax:++49 (0) 6081 / 964-111www.pancon.de

ATZ Buchanzeige-3.indd 1 05.09.12 15:29

1Pancon GmbH, Siemensstrasse 7, D-61267 Neu-Anspach, Tel.: ++49 (0) 6081 / 964-0, Fax: ++49 (0) 6081 / 964-111, www.pancon.de

CUSTOMIZED PIN-HEADERS & SOCKETS 0.8 to 5.08 mm

0.80*1.20mm Pin Header, Dual Row, SMTSpecifi cationsCurrent Rating: 0.75 AMPContact Resistance: 20m Ω Max.Insulation Resistance: 1000M Ω Min.Withstanding Voltage: 500V AC/MinuteOperating Temperature: -40° C to +105° CContact Material: Phosphore BronceContact plating: Au or Sn over NiInsulator Material: Polyester (UL94V-0)Standard: LCP + 30%GF

1.00mm Pin Header, Single/Dual Row, StraightSpecifi cationsCurrent Rating: 0.75 AMPContact Resistance: 20m Ω Max.Insulation Resistance: 1000M Ω Min.Withstanding Voltage: 500V AC/MinuteOperating Temperature: -40° C to +105° CContact Material: BrassContact plating: Au or Sn over NiInsulator Material: Polyester (UL94V-0)Standard: PA6T + 30%GF

31

42

Board Spacer

CONNECTORS EUROPE

Wire to Board & Harness We have appropriate tools for all needs available The range comprises manual tools and goes to semi-automatic systems

CONNECTORS EUROPE

Industrial Markets

References Consumer DeLonghi, DIGMESA, ITW Automation and Drives Siemens, Bosch Rexroth, Baumüller Industrial electronic: Phoenix Contact, Schlumberger, Durst (IT), A2E (F), Geral (F), Socomec (F), GE (E), Intracom (GR), Flextronics (IT) Data and Measurement Technology: Rohde & Schwarz Building systems and Security: Otis, Kone (FIN), E.D.P. (IT), Emergenzamatic (IT), SEA (IT), C.Silva (E), EDEL (E), SIEL (IT), Thyssen, Plettac Medical: Fresenius, Roche, Siemens, OMS (IT), GE (E) , Grifols (E), Sorisa (E), GAM (IT) Vending: Sielaff, Stiefel Communication Nokia, Telefonica, Teytel (E), Telabs (FIN), Printing MAN Roland, König & Bauer Aerospace BAE, Marconi (IT)

Fresenius, Roche, Siemens, OMS (IT), GE (E) , Grifols (E), Sorisa (E),

Nokia, Telefonica, Teytel (E),

MAN Roland, König & Bauer

© MAN Roland Druckmaschinen AG© MAN Roland Druckmaschinen AG

CONNECTORS EUROPE

Automotive Solutions Pancon Product Technologies comprise the classic Through-Hole solder, THR, SMT, PressFit and IDC solutions.

PressFit Solutions consisting of: Pancon Needle Eye Design Stamped PressFit Zone 0.63 / 0.80 /... High Temperature Application - 40 to + 150 degree Celsius In line with stringent automotive requirements

Customized Connectors, housings and individual solutions: Development, Project Management, Production and logistic Services Through-Hole-Refl ow and SMD versions Packing in Tape & Reel, Tubes or Bags Selective confi guration of contact layout in connectors, also with mixed Power and Signal Contacts Special Housings (upper and lower part) taking in mind the counterpart of the customers and interfacing with existing components Projects with fi rst and second tier suppliers such as Brose, Bitron, NIDEC, Automotive Lighting, Bosch, Zollner, Hella, Methode Electronics and through distribution

Connectorsfor Electrical Window Lifting

High Temp Connectorfor Differential Lock

Connector for Comfort Control

High Temp Connectorfor Differential LockConnector for Control

unit of Xenon Light

Press-In Connector Rotary Clutch Switch

Press-In Connector Comfort Control

Press-In Connector Hazard Switch

Control Box for DoorControl Box for Door

Connectors for Fuel Control

Control unit for Trucks