Mago Befestigungstechnik GmbH - ebs-eg.com sockets.pdf · Mago Befestigungstechnik GmbH ......
20
Mago Befestigungstechnik GmbH MAGO Befestigungstechnik GmbH • Innotech Center/Top 1.1e • Salurnerstr. 22 • A6330 Kufstein • Austria Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected] MAGO Befestigungstechnik GmbH • Innotech Center/Top 1.1e • Salurnerstr. 22 • A6330 Kufstein • Austria Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected] Transport Anchoring System Transport Anchor System Rebar Coupling System Heavy & Light Expansion Anchors Anchor Channels and Accessories Formwork Accessories Powder Actuated Fastening System Cable Tray System
-
Upload
truongdien -
Category
Documents
-
view
235 -
download
0
Transcript of Mago Befestigungstechnik GmbH - ebs-eg.com sockets.pdf · Mago Befestigungstechnik GmbH ......
Mago Befestigungstechnik GmbH
MAGO Befestigungstechnik GmbH • Innotech Center/Top 1.1e • Salurnerstr. 22 • A6330 Kufstein • Austria Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
MAGO Befestigungstechnik GmbH • Innotech Center/Top 1.1e • Salurnerstr. 22 • A6330 Kufstein • Austria Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
Transport Anchoring System
Transport Anchor System
Rebar Coupling System
Heavy & Light Expansion Anchors
Anchor Channels and Accessories
Formwork Accessories
Powder Actuated Fastening System
Cable Tray System
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
Product Groups
Part 1. Transport Anchoring System
Mago Lifting Sockets 1.1
Mago Crown Foot Anchors 1.2
Mago Flat Plate Sockets 1.3
Mago Bolt Anchors 1.4
Mago Bar Anchors 1.5
Mago Lifting Studs 1.6
Mago Shear Studs 1.7
Mago Lifting Eyebolts 1.8
Mago Fixing Inserts 1.9
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
1.1 Mago Lifting Sockets
Technical DataThread
d D c e LRD12 11112040 500 RD12x1.75 15 8.0 22 40 200 4.1RD14 11114047 800 RD14x2.0 18 10.5 25 48 100 4.5RD16 11116055 1,200 RD16x2.0 21 13.0 27 56 100 6.2RD18 11118065 1,600 RD18x2.5 24 13.0 34 65 100 10.8RD20 11120069 2,000 RD20x2.5 28 15.5 35 70 100 14.6RD24 11124078 2,500 RD24x3.0 31 18.0 44 79 100 19.5RD30 11130105 4,000 RD30x3.5 40 22.5 57 106 50 21.5RD36 11136125 6,300 RD36x4.0 47 27.2 68 125 25 18.0RD42 11142145 8,000 RD42x4.5 54 32.0 80 145 20 21.0RD52 11152195 12,500 RD52x5.0 68 40.0 98 195 10 24.1
Material/Finish: G = Electro-Plating, S = Stainless Steel A2/304, V = Stainless Steel A4/316The SWL (Safe Working Load) is calculated at the concrete strength of 25N/mm2
Description Ref. No. Qty/Package
Approx.kg/Package
Dimension (mm)SWL (kg)
Ø
The Mago lifting sockets are widely used in the application of precast concrete construction, such as lifting beams, wall and floor slabs etc.
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
Application Guide
1.1 Mago Lifting Sockets
dLb dB
60
additional reinforcement
Reinforcement and Component Dimensions.dB dR Edge Minimum Min.panel
10 15 25 35 distance distance thickness(kN) (kN) a(mm) b(mm) t(mm)
RD 12 6 24 27 23 18 15 5 2.5 150 300 60RD 14 8 32 30 27 21 18 8 4 200 400 70RD 16 10 40 35 32 25 20 12 6 200 400 80RD 18 10 40 49 43 34 28 16 8 250 500 100RD 20 12 48 51 44 35 30 20 10 300 550 110RD 24 14 56 56 45 37 32 25 12.5 350 600 125RD 30 16 64 74 66 52 45 40 20 400 650 140RD 36 20 140 98 84 65 52 63 31.5 450 800 200RD 42 25 175 100 86 68 61 80 40 550 1000 240RD 52 28 196 145 125 92 85 125 62.5 700 1200 280
adm.FQ(min./
mm)(mm)
adm.Fz
Lifting strength (N/mm²) a�=60°Size
Length of legs Lb (cm)
R
G=0
ReinforcementMake sure the reinforcement bar sits tightly and firmly against the bottom of the crosshole, no gap is allowed as shown G=0, diameter and length of the reinforcement are determined on socket size and concrete strength and/or high horizontal force, lat-eral additional reinforcement is required.
Edge Distances and Panel ThicknessThe edge distances, distances between sockets and the panel thickness must meet the requirements in table below to ensure the safety of lifting.
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
Technical DataThread
d D L e12112060 G,S,V RD12x60 500 RD12x1.75 17 60 24 712114070 G,S,V RD14x70 800 RD14x2.0 19 70 28 1112116080 G,S,V RD16x80 1200 RD16x2.0 21 80 32 1612118090 G,S,V RD18x90 1600 RD18x2.5 24 90 36 2212120100 G,S,V RD20x100 2000 RD20x2.5 27 100 40 3112124115 G,S,V RD24x115 2500 RD24x3.0 31 115 48 4812130150 G,S,V RD30x150 4000 RD30x3.5 39 150 60 99
Material/Finish: G = Electro-Plating, S = Stainless Steel A2/304, V = Stainless Steel A4/316The SWL (Safe Working Load) is calculated at the concrete strength of 25N/mm2
Ref. No. Material/Finish
kg/100PCs
Dimensions (mm)SWL(kg)Description
1.2 Mago Crown Foot Anchors
The Mago crown foot anchors are suitable for lifting the light weight flat precast-concreteunits, such as the floor panels, flat slabs etc..The advantage is that in most cases no ad-ditional reinforcement is needed as the load is transferred through the crown foot to the concrete.
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
Application Guide
1.2 Mago Crown Foot Anchors
Min. Edge Distance
RD12x60 9RD14x70 11RD16x80 12.5RD18x90 13.5RD20x100 15RD24x115 18RD30x150 23
a (cm)Description
The edge distance required in the table below must be reached in the application to ensure the design load can be achieved.
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
1.3 Mago Flat Plate Sockets
Technical DataThread
d D a b t L13112030 G.S.V. RD12 500 RD12x1.75 15.0 2535 3 30 4.213114033 G.S.V. RD14 800 RD14x2.0 18.0 3535 3 33 6.113116035 G.S.V. RD16 1,200 RD16x2.0 21.0 3550 3 35 9.113118045 G.S.V. RD18 1,600 RD18x2.5 24.0 4560 5 45 19.013120048 G.S.V. RD20 2,000 RD20x2.5 27.2 6060 5 48 25.013124055 G.S.V. RD24 2,500 RD24x3.0 31.0 6080 5 55 34.013130072 G.S.V. RD30 4,000 RD30x3.5 39.5 80100 6 72 66.013136085 G.S.V. RD36 6,300 RD36x4.0 47.0 100130 6 85 108.013142098 G.S.V. RD42 8,000 RD42x4.5 54.0 130130 8 98 175.013152118 G.S.V. RD52 12,500 RD52x5.0 67.2 130150 8 118 256.0
Material/Finish: G.S.V. = Electro-PlatingThe SWL (Safe Working Load) is calculated at the concrete strength of 25N/mm2
Material/Finish DescriptionRef. No. Approx.
kg/100PCsDimensions (mm)SWL (kg)
The Mago flat plate socket isideal for large, thin precast concrete components and GRC, such as slabs and shells, on which it is hard to place normal lifting sockets.
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
Application Guide
1.3 Mago Flat Plate Sockets
adm.Fz adm.FQ l1 l2 l3 ds(kN) (kN) (cm) (cm) (cm) (cm) a (cm) b (cm)
RD 12 5 2.5 6 6 25 6 18 35RD 14 8 4 7 6 36 6 18 35RD 16 12 6 7 9 42 8 25 50RD 18 16 8 8 9 53 8 30 60RD 20 20 10 8 9 64 8 30 60RD 24 25 12.5 10 9 64 10 40 80RD 30 40 20 11 9 83 12 50 100RD 36 63 31.5 12 14 114 14 65 130RD 42 80 40 12 14 125 16 65 130RD 52 125 62.5 15 14 155 20 75 150
SizeEdge
distanceCenter
distanceLoad Reinforcement
Reinforcement Bar:Make sure the reinforcement bar sits tightly and firmly on the flat plate by either tyingwire or welding (no slipping). Diameter and length of the reinforcement are determined by socket size and concrete strength at time of lifting (shown in table below). In case of low concrete strength and/or high horizon-tal force, lateral additional reinforcement is required.
Edge Distances and Panel ThicknessThe edge distances, distances between sockets (center distance) must meet the re-quirements in the table below to ensure the safety of lifting.
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
1.4 Mago Bolt Anchors
L
D
e
Ø
Technical Data
D L e14112100 G,S,V RD12x100 500 RD12x1.75 15 100 2214112150 G,S,V RD12x150 500 RD12x1.75 15 150 2214116150 G,S,V RD16x150 1200 RD12x2.0 21 150 2714116220 G,S,V RD16x220 1200 RD12x2.0 21 220 2714120150 G,S,V RD20x150 2000 RD20x2.5 27.2 150 3514120200 G,S,V RD20x200 2000 RD20x2.5 27.2 200 3514120270 G,S,V RD20x270 2000 RD20x2.5 27.2 270 3514124200 G,S,V RD24x200 2500 RD24x3.0 31 200 4314124320 G,S,V RD24x320 2500 RD24x3.0 31 320 4314130280 G,S,V RD30x280 4000 RD30x3.5 39.5 280 5614130380 G,S,V RD30x380 4000 RD30x3.5 39.5 380 5614136300 G,S,V RD36x300 6300 RD36x4.0 47 300 6814136420 G,S,V RD36x420 6300 RD36x4.0 47 420 68
Material/Finish: G = Electro-Plating, S = Stainless Steel A2/304, V = Stainless Steel A4/316The SWL (Safe Working Load) is calculated at the concrete strength of 25N/mm2
Dimensions (mm)ReferenceNo.
Material/Finish Thread dDescription SWL (kg)
dThe Mago bolt anchor is suitable for transport-ing precast concrete components of varying dimensions. Thin flat slabs, facing panels,beams of columns can all be easily transported by Mago bolt anchors. The load is transferred into the concrete through the bolt so generally no additional reinforcement is needed.
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
Application Guide
1.4 Mago Bolt Anchors
Additional Reinforcement for Diagonal Lifting
Size ds (mm) dr (mm) Ls (cm)Cuttinglength(cm)
Min.componentthickness
(cm)RD12 8 18 10 23 6RD16 8 20 20 43 7RD20 10 28 40 84 8RD24 12 33 50 105 10RD30 14 40 60 126 12
The diagonal lifting requires additional reinforcement illustrated as follows, for transverse lift-ing, please contact Mago for Technical Support.
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
Technical Data
L D D1RD12x190 15112190 B,G 500 190RD12x340 15112340 B,G 500 340RD16x270 15116270 B,G 1,200 270RD16x500 15116500 B,G 1,200 500RD20x350 15120350 B,G 2,000 350RD20x600 15120600 B,G 2,000 600RD24x400 15124400 B,G 2,500 400RD24x720 15124720 B,G 2,500 720RD30x540 15130540 B,G 4,000 540RD30x840 15130840 B,G 4,000 840RD36x670 15136670 B,G 6,300 670RD36x980 15136980 B,G 6,300 980
88
10101616181820202525
15152121
27.227.23131
39.539.54747
Material/Finish: B = Black or Bright Steel, G = Electro-PlatingThe SWL (Safe Working Load) is calculated at the concrete strength of 25N/mm 2
Dimensions (mm)Material/FinishRef. No.Description
d x L SWL (kg)
1.5 Mago Bar Anchors
The Mago bar anchor is suitable for transport-ing very thin-walled precast components such as thin walls, flat panels etc., even precastmasonry wall components can be transported with this bar anchor.
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
Application Guide
1.5 Mago Bar Anchors
Size
Min. edgedistance
a(cm)
Min.distance
b(cm)
Min.componentthickness
t (cm)RD12 20 40 6RD16 27 54 10RD20 35 70 10RD24 40 80 10RD30 54 108 14RD36 67 134 16
Edge Distance and Component Thickness
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
Technical Data
L D d b16113055 B,G 1.3 55 19 10 25 300 2116113065 B,G 1.3 65 19 10 25 300 2416113085 B,G 1.3 85 19 10 25 300 2416113120 B,G 1.3 120 19 10 25 200 2016125055 B,G 2.5 55 26 14 35 200 2416125085 B,G 2.5 85 26 14 35 100 1616125120 B,G 2.5 120 26 14 35 100 2116125170 B,G 2.5 170 26 14 35 100 2616150075 B,G 5 75 20 20 50 100 3416150095 B,G 5 95 20 20 50 50 1916150120 B,G 5 120 20 20 50 50 2216150240 B,G 5 240 20 20 50 50 3716175120 B,G 7.5 120 24 24 60 50 44.516175164 B,G 7.5 164 24 24 60 25 21.516110120 B,G 10 120 28 28 70 25 23.516110170 B,G 10 170 28 28 70 25 30
Material/Finish: B = Black or Bright Steel, G = Electro-Plating
kg/Package
Dimensions (mm)Material/FinishRef. No. Load class
(Ton)Qty/
Package
1.6 Mago Lifting Studs
The Mago lifting stud is suitable for lifting pre-cast concrete pipes and slabs. The round foot transfers the load into the concrete thus reach-ing high permissible load even with relatively short anchor length. Longer lengths are used for reduced edge space or reduced concrete strength.
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
1.7 Mago Shear Studs
D
t
d d1
h
Technical DataDescription L (mm) d (mm) D (mm) d1 (mm) t (mm) h (mm)
DS06 50-100 6.35 12.7 9.7 4.7 3DS10 50-175 9.52 19 12.5 7.1 4DS13 50-175 12.7 25.4 17 8 5DS16 50-175 15.8 31.7 21 8 7DS19 50-175 19 31.7 24 10 9DS22 50-200 22.2 34.9 28 10 10
Material/Finish: B = Black or Bright Steel, G = Electro-Plating
The Mago shear stud can be used as a simple concrete anchor to provide a permanent bond between steel and concrete, such as in con-crete encasement of steel beams, piling walls and coffer dams. Or it can be welded through metal decking to provide the required bond between the steel beams and the in-situ cast concrete floor.
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
D
L
k
Technical DataThread
dRD12 17112018 500 RD12x1.75RD14 17114021 800 RD14x2.0RD16 17116024 1,200 RD16x2.0RD18 17118027 1,600 RD18x2.5RD20 17120030 2,000 RD20x2.5RD24 17124036 2,500 RD24x3.0RD30 17130045 4,000 RD30x3.5RD36 17136054 6,300 RD36x4.0RD42 17142063 8,000 RD42x4.5RD52 17152078 12,500 RD52x5.0
D47.052.056.059.068.074.090.0103.096.0120.0
e18212427303645546378
k180180180200220220240260300320
L310340350385410435490570650760
Description Ref. No. Dimension (mm)SWL (kg)
1.8 Mago Lifting Eyebolts
The Mago lifting eyebolt is used for lifting precast concrete elements with precast an-chors inside. The eyebolt can work under both straight pull and shear pull loads. The pres-sure plate must be placed in good contact with concrete surface to ensure the proper transfer of the shear force.
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
Application Guide
1.8 Mago Lifting Eyebolts
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
1.9 Mago Fixing Inserts
D
M
c
k
e
t f
L
Technical DataThread
M D t L f e k c19108040 G,S,V M8X40 200 8 12 1.5 40 15 8 9 8.2 500 5.919108050 G,S,V M8X50 250 8 12 1.5 50 20 8 9 8.2 500 7.419110050 G,S,V M10X50 350 10 15 1.8 50 20 10 10 9.2 500 10.119110060 G,S,V M10X60 450 10 15 1.8 60 25 10 10 9.2 500 12.119112060 G,S,V M12X60 500 12 17 2.0 60 25 12 12 10.2 400 14.419112070 G,S,V M12X70 600 12 17 2.0 70 30 12 12 10.2 400 16.819114070 G,S,V M14X70 700 14 20 2.0 70 25 14 16 12.2 250 13.919114080 G,S,V M14X80 700 14 20 2.0 80 30 14 16 12.2 250 15.919116070 G,S,V M16X70 700 16 22.5 2.8 70 25 16 20 12.2 200 16.019116080 G,S,V M16X80 800 16 22.5 2.8 80 25 16 20 12.2 200 18.319116100 G,S,V M16X100 1000 16 22.5 2.8 100 30 16 20 12.2 150 17.119120100 G,S,V M20X100 1250 20 27 3 100 40 20 22 14.2 100 16.919120120 G,S,V M20X120 1250 20 27 3 120 40 20 22 14.2 100 20.219124120 G,S,V M24X120 1700 24 32 3.5 120 50 24 34 14.2 50 14.019127135 G,S,V M27X135 2200 27 36 4 135 60 27 34 17.2 50 20.219130150 G,S,V M30X150 2600 30 42 5 150 70 30 40 17.2 25 16.3
Material/Finish: G = Electro-Plating, S = Stainless Steel A2/304, V = Stainless Steel A4/316The SWL (Safe Working Load) is calculated at the concrete strength of 25N/mm2
Ref. No. Material/Finish
Qty/Package
Approx.kg/Package
Dimensions (mm)SWL(kg)Description
The Mago fixing inserts are used for the fixingof lightweight precast concrete units. A rein-forcement tail must be used for the transmis-sion of the load into the concrete. The fixinginserts are not supposed to be used for lifting under any circumstances.
MAGO Befestigungstechnik GmbH • Phone: 0043 5372 6912-540 • Fax: 0043 5372 6912-549 • www.mago.at • [email protected]
Application Guide
1.9 Mago Fixing Inserts
Note: Fixing inserts with cross bars and/or nailing plates are available on request.
Db
db
Lb
Db db Lb8 6 50 250
M10 6 50 250M12 8 60 300M14 10 60 300M16 10 70 350M20 12 80 400M24 12 80 450M27 14 90 500M30 14 100 550
Threadd
Dimensions (mm)
Reinforcement dimensions
