Post on 28-Mar-2021
TYPENPRÜFUNG NACH EUROCODE
www.silos-phenix.com
GETREIDELAGERSILOSGRAIN STORAGE SILOS
EN 1090
3 GETREIDELAGERSILOSGETREIDELAGERSILOS www.silos-phenix.com2
Mit seiner 30° Neigung, nimmt unser neues Dach hohe Lasten auf und ist dafür ausgelegt, die zusätzlichen Lasten aus TKF, Temperaturmessgehängen und erhöhten Schneelasten -abhängig von dem Aufstellort- zuverkraften. Seine Standardkonstruktion entspricht auch den gültigen Explosionsschutzvorschriften.
Alle Dachsegmente besitzen eine Auflage aus GALFAN GF90 (Besserer Schutz als verzinkter Stahl: bis 20 Jahre Garantie gegen Durchrostung). Die spezielle “J“ Abkantung, die für die maximale Belastung ausgelegt wurde, bietet einen weiteren Vorteil bei der Montage der Dachsegmente: durch den Klemmvorgang der Segmente untereinander wird die Montagezeit reduziert. Farbige Beschichtung (Lackierung Beigebraun RAL 8024 in Stan-dardausführung) auf Anfrage.
Zusätzliche statische Entlüftungshauben abhängig von dem Lagervolumen als Option.
Die Blechhöhe beträgt 1077 mm und vermindert somit erheblich die Anzahl Ringe, Verschraubungen und Stützenverbindungen. Dieser Vorteil, verbunden mit unserer neuen exklusiven “W” Stütze, bietet eine unerreichte Belastung und reduzierte Montagedauer an.
Die Wandwellbleche werden aus hochfestem Stahl der Güte S350GD + Z nach EN 10346 hergestellt, die Verzinkung Sendzimir Z 450 gewährleistet einen optimalen Schutz gegen Korrosion und eine lange Lebensdauer.
Das Profil 120 X 11 mm der Wellbleche mit flacher Wellung ist flacher als das des Wettbewerbs, und hat den Vorteil, dass bei der Entleerung kein Produkt in den Wellen verbleibt.
Die neue exklusive “W” Außenstütze ist robuster als die anderen Stützenprofile auf dem Markt. Die “W” Stütze ist so entwickelt, dass die Vertikallasten aus dem Schüttgut aufgenommen werden, und sein besonderes versetztes Montageverfahren sichert eine höhere Stabilität und stützt die Laufsteganlagen und TKF ganz mit ab.
Verzinktes Schraubenmaterial: Festigkeit 8.8 mit integrierten Dichtscheiben.
The 1077 mm sidewall height requires significantly fewer rings, seams and connection stiffeners. When combined with our exclusive “W” stiffener, bins offer unsurpassed strength while reducing costly assembly time.
The corrugated steel sidewalls are created from high quality steel grade S350GD + Z according to EN 10346, Sendzimir galvanizing Z 450 ensures greater corrosion resistance and a longer life. Sidewall sheets are laminated together to provide greater strength on larger bins.
The 120 X 11 mm profile of the shallow form corrugated sheets is wider than that of our closest competitor, thus minimizing the buid-up of residual grain on the silo wall during unloading.
The exclusive exterior “W” stiffener is stronger than the closest competing stiffener. Designed to support the vertical load, the unique “W” staggered stiffener system provides supplemental strength and fully supports overhead catwalks and conveyors.
Galvanized fixings: steel grade 8.8, integrated seal washers.Technische Daten und Angaben sind unverbindlich. Konstruktive Änderungen behält CHIEF PHENIX sich vor.
Dach / Roof Silomantel / Sidewall
Einstiegstür / Access door
• Dieser ist ausgelegt für TKF-Förderleistung bis 300 t/h in der Standardaus führung.• Kpl. mit Laufgang aus Gitterrosten -Maschen 19 mm-, Handlauf, Knie- und Fußleiste.• Open galvanized catwalks for conveyors up to 300 t/h are offered as standard.• Walkways with gratings - 19 mm open area.
• Aluminium Leiter mit verzinktem Rückenschutz, Ruhepodeste mit Gitterrost, Handlauf, Knie- und Fußleiste nach EN ISO 14122.• Zwickelpodest zwischen 2 Silozellen zur Inspektion der Dachluken, unterhalb der Silotraufe.• Aluminium safety ladders with galvanized safety hoops and rest plate forms with safety handrails, complying with EN ISO 14122.• Eaves platform for access to the roof inspection hatch.
• Doppelte Ausführung mit regendichter Vorluke, auf Scharniere gelagert und einer Treppe als Einstiegshilfe.• Consisting of internal reinforced door to support grain loads and weather proof external door.
Sicherheit / Safety
Laufsteg / Catwalk
AuslauftrichterHopper bottoms
• 45° Innentrichter (60° auf Anfrage).• Integrated 45° hoppers (60° on request).
• 32° Belüftungskonen.• 32° ventilated hoppers.
InnensilosFarm range
Silos für Innenaufstellung von 3 bis 659 m3in Standardausführung.Indoor silos for farm storage with capacities from3 to 659 m3 offered as standard.
Belüftung durch Halbrundkanäle,Schlitzlochbleche, Siebboden.
Elevated, perforated channel-lock floors.
BelüftungVentilation
With its 30° pitch, our new roof comes standard with high peak load capacities and is designed to support the additional loads imposed by conveyors, temperature cables or heavier snow loads for your geographic location. In addition, its design meets the antiexplosion criteria.
All roof panels are of GALFAN GF90 (superior to galvanizedsteel and guaranteed up to 20 years) and feature an interlocking “J” rib design for outstanding strength and reduced assembly time. Coloured polyester coating available on request.
Additional roof vents may be added depending on aeration requirements.
Hauteurs toits (→)Heights of roofs (→)
SERIES (→)
Ø (M) (→)
VirolesRings
HauteursHeights
(←) Hauteurs toits (←)Heights of roofs
(←) SERIES(←) Ø (M)
VirolesRings
HauteursHeights
45678910
1112131415
1617181920
2122232425
262728
4,315,396,477,548,629,7010,78
11,8512,9314,0115,0916,17
17,2418,3219,4020,4821,55
22,6323,7124,7925,8626,94
28,0229,1030,18
45678910
1112131415
1617181920
2122232425
262728
4,315,396,477,548,629,7010,78
11,8512,9314,0115,0916,17
17,2418,3219,4020,4821,55
22,6323,7124,7925,8626,94
28,0229,1030,18
52647688100112124
136148160172184
196208220232244
83101120139158176195
214233252271290
309328347366385
404423
121148175202229256283
310337364391418
445472499526553
580607634661
167204241277314351388
425462499536573
610647684721758
795832869906943
980
222270318366414462510
558606654702750
798846894942990
10381086113411821230
127813261374
285346407468529590650
711772833894955
10161077113811991260
13211382144315041565
162616871748
358433508583658734809
884959103411091185
12601335141014851560
16351710178518601935
201020852160
440531622713804895986
10761167125813491440
15311622171318041895
19862077216822592350
244125322623
53264074985796510741182
12901399150716161724
18321941204921582266
23742483259126992807
291530233131
6347618881016114312701397
15241652177919062033
21602288241525422669
27962924305131783305
343235593686
74789410421189133714841632
17791927207422222369
25172664281229593107
32553402355036973845
399241394286
1005119813911583177619692161
23542547273929323125
33173510370338954088
42814473466648595051
524454375630
1310155417982042228525292773
30173261350537493992
42364480472449685212
54565699594361876431
667569197163
1664196522662567286831693470
37714072437346754976
52775578587961806481
67827083738476857986
828785888889
2070243427983163352738914256
46204984534857136077
64416806717075347898
82638627899193559720
100841044810812
2531296433983831426546985132
55655999643268667299
77338166860090339467
990010334107671120111635
120681250212935
3049355840664575508455936102
66107119762881378645
91549663101721068111189
1169812207127161322513733
142421475015258
4269494756246301697976578333
90119688103661104311720
1239813075137521443015107
1578516462171391781718494
191711984920526
1,02
400
3,77
1,29
500
4,71
1,56
600
5,65
1,83
700
6,60
2,10
800
7,54
2,38
900
8,48
2,65
1000
9,42
2,92
1100
10,36
3,15
1200
11,31
3,43
1300
12,25
3,70
1400
13,19
4,24
1600
15,08
4,55
1800
16,96
5,10
2000
18,84
5,64
2200
20,73
6,19
2400
22,61
6,73
2600
24,50
7,82
3000
28,27
VOLUMEN - VOLUMES (M3)
06/17
IB1MO
ctobe
r 11, 20
19 11
:32 AM
Rue de Maubeuge F-59131 Rousies Tel : (33) 03 27 69 42 42 Fax : (33) 03 27 64 95 85contact@silos-phenix.comwww.silos-phenix.com
Unsere Silos sind nach dem neuesten EUROCODE-Normenwerk berechnet und mit TYPENPRÜFUNG beliefert. Die alten Normen -DIN-Reihe 1055 (2005), DIN 18800 und DIN 18914- sind ungültig geworden.
Die Neufassung der Normen zeichnet sich durch eine genauere Erfassung der am Bauwerkstandort gegebenen klimatischen Bedingungen (Schnee-, Eis- und Windlasten) und der umweltspezifischen Einflüsse (Erdbebengefahren) aus. Auch die von der Gebäudegeometrie abhängigen Lastansätze werden von den neuen Normen realitätsnäher erfasst. In Deutschland ist es somit
Vorschrift geworden, der Baubehörde statische Unterlagen vorzulegen, die die Erdbeben- (EN 1998-4 + NA), Wind (EN 1991-1-4 + NA) und Schneelasten (EN 1991-1-3 + NA ) maßgebenden Örtlichkeiten nach EUROCODE erfassen.
Our calculations meet the newest standard EUROCODE and are recognized by international inspection offices. The EUROCODE replaces the former national standards (French NFP, German DIN etc.) which are no longer valid. Where EUROCODE is specified, a separate calculation for each project based on the common texts and the national annexes is compulsory and is calculated according to the nature of the stored products, the earthquake
(seismic) (EN 1998-4 + NA), wind (EN 1991-1-4 + NA) and snow (EN 1991-1-3 + NA) conditions applicable to the specific area.
Technische Daten und Angaben sind unverbindlich. Konstruktive Änderungen behält CHIEF PHENIX sich vor.
*Die Volumen basieren auf einem Schüttkegel von 28° (30° Dachneigung). All capacities are based on a 28° angle of repose (30° roof).
Statische Baugrundlagen / Design criteria