004 Básicos Redes Bis

26
Sistema de Inmunoensayo Sistema de Inmunoensayo Access® Access® Introducción a Redes Introducción a Redes

Transcript of 004 Básicos Redes Bis

Page 1: 004 Básicos Redes Bis

Sistema de Inmunoensayo Sistema de Inmunoensayo Access®Access®

Introducción a Introducción a RedesRedes

Page 2: 004 Básicos Redes Bis

• Comunicar componentes del hardware a Comunicar componentes del hardware a las funciones de redeslas funciones de redes

• Conocer los principios básicos de Conocer los principios básicos de comunicaciones de redes del sistema comunicaciones de redes del sistema Access 2 Access 2

• Localizar y utilizar los documentos de Localizar y utilizar los documentos de servicio del Access 2 específicos de servicio del Access 2 específicos de redes.redes.

ObjetivosObjetivos

Page 3: 004 Básicos Redes Bis

Documentos de Servicio Documentos de Servicio AplicablesAplicables

• Chapter 14B: Chapter 14B: Software - Access 2Software - Access 2

• Chapter 16: Chapter 16: Troubleshooting, hardwareTroubleshooting, hardware– Troubleshooting, network, Access 2Troubleshooting, network, Access 2

• Identificar PC IP addressIdentificar PC IP address• Identificar AU IP addressIdentificar AU IP address• Test PC Network Interface-pingTest PC Network Interface-ping

Page 4: 004 Básicos Redes Bis

GlosarioGlosario

• XPXP (Microsoft Windows Operating System) (Microsoft Windows Operating System)• RTOSRTOS (OS9000 (OS9000 RReal eal TTime ime OOperating perating SSystem)ystem)• UI UI ((UUser ser IInterface)nterface)• AU AU ((AAnalytical nalytical UUnit)nit)

– Instrumento Access sin PC y monitorInstrumento Access sin PC y monitor– HD con OS9000 RTOSHD con OS9000 RTOS– No tiene UI o base de datosNo tiene UI o base de datos

• PCPC (consola) (consola)– Access 2 PCAccess 2 PC– Tiene UI (y quizá base de datos)Tiene UI (y quizá base de datos)

Page 5: 004 Básicos Redes Bis

• Tarjeta EthernetTarjeta Ethernet– Network PCB en Access 2 (NIC)Network PCB en Access 2 (NIC)

• HubHub– Multi-port connection box for Ethernet (10Base-T)Multi-port connection box for Ethernet (10Base-T)

• Cable Crossover (cable para un sistema)Cable Crossover (cable para un sistema)– Used in older systems to connect PC to AU for single system Used in older systems to connect PC to AU for single system

configuration (yellow cable), and troubleshootingconfiguration (yellow cable), and troubleshooting• Cable de RedCable de Red

– Conecta PC al AU al Hub (azul = 14 feet, gris = 50 feet)Conecta PC al AU al Hub (azul = 14 feet, gris = 50 feet)• Required for workgroup Required for workgroup • Provided, and required for new single system installs, eliminating Provided, and required for new single system installs, eliminating

need to have PC powered on before AUneed to have PC powered on before AU

Glosario…Glosario…

Page 6: 004 Básicos Redes Bis

Tarjeta de Red Access 2Tarjeta de Red Access 2

I/O PCB

CPU PCB

Stepper Motor Controller PCB

Ultrasonics PCB

Stepper Motor Driver PCB

Front of Instrument

Power Driver PCB

Ethernet PCB (A2 Only)

Page 7: 004 Básicos Redes Bis

• Sistema SóloSistema Sólo (sistema un solo equipo) (sistema un solo equipo)– 1 Access2 AU/PC par (no en red)1 Access2 AU/PC par (no en red)

• Grupo de Trabajo (Workgroup)Grupo de Trabajo (Workgroup)– 2 - 4 Acess2 AU/PC pares en red2 - 4 Acess2 AU/PC pares en red

Glosario…Glosario…

Page 8: 004 Básicos Redes Bis

• Apagado “Agradable” (“Graceful” Apagado “Agradable” (“Graceful” shutdown)shutdown)– Cierre de archivos usando tanto la función de apagado Cierre de archivos usando tanto la función de apagado

de la UI o la función de apagado del menú de inicio de de la UI o la función de apagado del menú de inicio de Windows antes de apagar la PC.Windows antes de apagar la PC.

• Si la PC se Si la PC se apagóapagó agradablemente agradablemente– La comunicación con el AU esta formalmente La comunicación con el AU esta formalmente

terminada.terminada.– El AU ya no intentará enviar datos después de un El AU ya no intentará enviar datos después de un

apagado suave.apagado suave.

Glosario…Glosario…

Page 9: 004 Básicos Redes Bis

• Apagado “Agradable” (“Ungraceful” Apagado “Agradable” (“Ungraceful” shutdown)shutdown)– Apagado de la PC sin primero haber cerrado los archivos.Apagado de la PC sin primero haber cerrado los archivos.– Esto resulta comunmente bajo muchas condiciones en una Esto resulta comunmente bajo muchas condiciones en una

base de datos corrompida.base de datos corrompida.

• Si la PC es Si la PC es apagadaapagada desagradablemente desagradablemente– La comunicación AU/base de datos es repentinamente La comunicación AU/base de datos es repentinamente

interrumpida en medio del proceso.interrumpida en medio del proceso.– Cualquier “objeto” que estuviera comunicando cuando se Cualquier “objeto” que estuviera comunicando cuando se

presenta un apagón tiene alta posibilidad de ser corrompido.presenta un apagón tiene alta posibilidad de ser corrompido.

Glosario…Glosario…

Page 10: 004 Básicos Redes Bis

Componentes de Componentes de ComunicaciónComunicación

• AUAU– RTOS OS9000RTOS OS9000

• PC’sPC’s– UI uses Windows XPUI uses Windows XP– Uno se configura como servidor al instalarloUno se configura como servidor al instalarlo– Hay una sola conexión LIS, en el servidorHay una sola conexión LIS, en el servidor

• Tarjetas Ethernet, cables y hub Tarjetas Ethernet, cables y hub – Permiten al AU y PC interactuar (comunicar)Permiten al AU y PC interactuar (comunicar)– Permiten capacidades para enlazarse en redPermiten capacidades para enlazarse en red

• Sistemas múltiples (hasta 4) corriendo independientementeSistemas múltiples (hasta 4) corriendo independientemente• Todos usando la misma base de datos.Todos usando la misma base de datos.

Page 11: 004 Básicos Redes Bis

Comunicación AU/PC Access2Comunicación AU/PC Access2

• Iniciando una corridaIniciando una corrida– Requiere comunicación UI/RTOS Requiere comunicación UI/RTOS

• Manteniendo una corridaManteniendo una corrida– Caso normal UI y RTOS comunican y actualizanCaso normal UI y RTOS comunican y actualizan– En ausencia de UI, RTOS puede completar una corrida En ausencia de UI, RTOS puede completar una corrida

empezadaempezada• Transferencia de resultadosTransferencia de resultados

– Requiere comunicación UI/RTOSRequiere comunicación UI/RTOS• Cualquiera que se Cualquiera que se apagueapague el otro no se cae el otro no se cae• Cualquiera que se Cualquiera que se reinicialicereinicialice el otro no se cae y el otro no se cae y

no se reinicializa automáticamente.no se reinicializa automáticamente.

AU

RTOS

PC

UI

Page 12: 004 Básicos Redes Bis

• ServidorServidor– Viene a ser el servidor durante la Viene a ser el servidor durante la

instalación por tener la virtud de instalación por tener la virtud de ser el primero donde se carga el ser el primero donde se carga el softwaresoftware

– La PC servidor tiene lo siguiente:La PC servidor tiene lo siguiente:• User interfaceUser interface

– Ability to set date/timeAbility to set date/time– Backup capabilityBackup capability– Global LIS connectionGlobal LIS connection– Auto delete featuresAuto delete features

• Database (for workgroup)Database (for workgroup)• RegistryRegistry• UPS connectionUPS connection

disc

Colorado GBhp

Server

8

Glosario...Glosario...

Page 13: 004 Básicos Redes Bis

• ClienteCliente– Any system in the Any system in the

workgroup that is not the workgroup that is not the serverserver

– The client PC has the The client PC has the followingfollowing

• User interface (different)User interface (different)• RegistryRegistry• Does Does notnot contain a database contain a database• Surge protector connectionSurge protector connection

disc

Colorado GBhp

Client

8

Glosario…Glosario…

Page 14: 004 Básicos Redes Bis

Comunicación Crítica Comunicación Crítica Servidor/Cliente Access2Servidor/Cliente Access2

• Server PC supports Server PC supports its AU and all clients its AU and all clients by providing a by providing a location for the DBlocation for the DB

• Communication flows Communication flows between AU and DB between AU and DB through UIthrough UI

Server AU

Server PC

HD

Client AU

Client PC

HDUI

DB

UI

*Note this is not how the cabling is set up

Page 15: 004 Básicos Redes Bis

Access 2 Client UI CrashAccess 2 Client UI Crash• If client UI If client UI

crashes crashes (without (without affecting DB)affecting DB)

– Client AU can Client AU can continue a runcontinue a run

– Server is Server is unaffectedunaffected

• Reboot client PCReboot client PC

Server AU

Server PC

HD

Client AU

Client PC

HD

UI

UI

UI

DB

*Note this is not how the cabling is set up

X

X

Page 16: 004 Básicos Redes Bis

Access 2 Server UI CrashAccess 2 Server UI Crash• If server UI If server UI crashes crashes

(without affecting the (without affecting the database.)database.)

– Server AU can Server AU can continue a runcontinue a run

– Client is Client is unaffectedunaffected

• Reboot all PCs (take Reboot all PCs (take clients down first, bring clients down first, bring up server first)up server first)

Server AU

Server PC

HD

Client AU

Client PC

HDUI

UI

DBXUI

DB

*Note this is not how the cabling is set up

X

Page 17: 004 Básicos Redes Bis

Access 2 Database Access 2 Database ShutdownShutdown

• If server UI is If server UI is shut downshut down or or crashes crashes (affects the DB) (affects the DB) then DB is also shutdownthen DB is also shutdown

• Effects Effects

– Client UIs will Client UIs will crashcrash

– All AUs can All AUs can continue a runcontinue a run

• Reboot all PCs (take clients Reboot all PCs (take clients down first, bring up server down first, bring up server first)first)

Server AU

Server PC

HD

Client AU

Client PC

HD UI

UIXDB

X

X

X

*Note this is not how the cabling is set up

Page 18: 004 Básicos Redes Bis

• IP address (internet protocol address)IP address (internet protocol address)– Required specific identifier for communication between Required specific identifier for communication between

the PC and AUthe PC and AU– All are in the format 192.168.2.All are in the format 192.168.2.xx, where x is the , where x is the

identifying variableidentifying variable– PC/AU typical pair numbering conventionPC/AU typical pair numbering convention

• PC:PC: odd last digit (i.e. 192.168.2. odd last digit (i.e. 192.168.2.33))• AU:AU: next higher even last digit (i.e. 192.168.2. next higher even last digit (i.e. 192.168.2.44))

• RegistryRegistry– System for directing communication between and System for directing communication between and

among the PCs and AUsamong the PCs and AUs• Stand-alone Access 2Stand-alone Access 2• Access 2 workgroupAccess 2 workgroup

Glosario…Glosario…

Page 19: 004 Básicos Redes Bis

IP AddressIP Address

• Cuando el par PC/AU es embarcado de fábrica Cuando el par PC/AU es embarcado de fábrica (sin software)(sin software)

– PCPC IP address number set to IP address number set to 192.168.2.192.168.2.11– AUAU IP address number set to IP address number set to 192.168.2.192.168.2.22

• Individual units in a workgroup are given new IP Individual units in a workgroup are given new IP addresses automatically during software addresses automatically during software installationinstallation– Exact address depends on the order software is Exact address depends on the order software is

installedinstalled

Page 20: 004 Básicos Redes Bis

ServerServer– PC: xxx.xxx.x.3PC: xxx.xxx.x.3– AU: xxx.xxx.x.4AU: xxx.xxx.x.4

Client 1Client 1– PC: xxx.xxx.x.5PC: xxx.xxx.x.5– AU: xxx.xxx.x.6 AU: xxx.xxx.x.6

Client 2Client 2– PC: xxx.xxx.x.7PC: xxx.xxx.x.7– AU: xxx.xxx.x.8AU: xxx.xxx.x.8

Client 3Client 3– PC: xxx.xxx.x.9PC: xxx.xxx.x.9– AU: xxx.xxx.x.10AU: xxx.xxx.x.10

• Numeracíón convencional para Grupo de trabajoNumeracíón convencional para Grupo de trabajo

• Direcciónes son fijasDirecciónes son fijas Si una PC Servidor falla, un cliente puede ayudarSi una PC Servidor falla, un cliente puede ayudar

– Base de datos cargada en una PC cliente (respaldo en USB)Base de datos cargada en una PC cliente (respaldo en USB) The system registry must be modified to direct The system registry must be modified to direct

communications to the database on the new servercommunications to the database on the new server

IP AddressIP Address

Page 21: 004 Básicos Redes Bis

Determining IP AddressDetermining IP Address

For PC- Start/runFor PC- Start/run--type type cmdcmd, type , type ipconfigipconfig

For AU-Start/run-type For AU-Start/run-type cmdcmd, type , type pingpingNOTE: All IP addresses on the hub will be available for response. If NOTE: All IP addresses on the hub will be available for response. If necessary isolate the AU by disconnecting other AU/PCs from the necessary isolate the AU by disconnecting other AU/PCs from the networknetwork

Refer to service manual Ch. 16 Troubleshooting,hardware,Refer to service manual Ch. 16 Troubleshooting,hardware,Troubleshooting, network errors, Access 2Troubleshooting, network errors, Access 2

Page 22: 004 Básicos Redes Bis

Determining PC IP AddressDetermining PC IP Address

Page 23: 004 Básicos Redes Bis

• PingPing– A command used to check for network response of IP A command used to check for network response of IP

addressaddress• Any PC can “ping” any other PC and all AUs in the workgroupAny PC can “ping” any other PC and all AUs in the workgroup

– Executed from Command Prompt Window in NTExecuted from Command Prompt Window in NT• START/Run, type “Cmd”, click OKSTART/Run, type “Cmd”, click OK• At C prompt, typeAt C prompt, type “Ping 192.168.2.x” “Ping 192.168.2.x”

Glosario…Glosario…

Page 24: 004 Básicos Redes Bis

Ping SatisfactorioPing Satisfactorio

24

Page 25: 004 Básicos Redes Bis

Ping No SatisfactorioPing No Satisfactorio

Page 26: 004 Básicos Redes Bis

Otros Comandos/Programas Otros Comandos/Programas ÚtilesÚtiles

• Desde UI Access 2 Desde UI Access 2 – Salir de UISalir de UI

• Presionar [Alt] [F4], introducir password Presionar [Alt] [F4], introducir password (Access2Support)(Access2Support)

– Para acceder a Menú Inicio sin salir de UIPara acceder a Menú Inicio sin salir de UI• Utilizar la tecla de Windows Utilizar la tecla de Windows en el teclado en el teclado• O presionar [Ctrl] [Esc]O presionar [Ctrl] [Esc]

• Para prevenir que la UI del Access 2 se autoinicie Para prevenir que la UI del Access 2 se autoinicie durante el boot updurante el boot up– Mantener presionada la tecla [Ctrl] cuando aparezca Mantener presionada la tecla [Ctrl] cuando aparezca

la pantalla aqua y hasta que aparezca el Menú Iniciola pantalla aqua y hasta que aparezca el Menú Inicio