2006 GMC Yukon, Yukon XL,Yukon Denali, Yukon XL Denali … · 2020-06-06 · The navigation system...

Overview ........................................................ 1-1Overview .................................................. 1-2

Features and Controls ..................................... 2-1Features and Controls ................................ 2-2

Navigation Audio System ................................ 3-1Navigation Audio System ............................ 3-2

Index ................................................................ 1

2006 GMC Yukon, Yukon XL,Yukon Denali,Yukon XL Denali Navigation System M

GENERAL MOTORS, GM, the GM Emblem, GMC, theGMC Truck Emblem, and the names YUKON andDENALI are registered trademarks of General MotorsCorporation.

The information in this manual supplements the ownermanual. This manual includes the latest informationavailable at the time it was printed. We reserve the rightto make changes in the product after that time withoutnotice. For vehicles first sold in Canada, substitutethe name General Motors of Canada Limited for GMCwhenever it appears in this manual.

Keep this manual with the owner manual in the vehicle,so it will be there if it is needed. If the vehicle is sold,leave this manual in the vehicle.

Canadian OwnersFor Canadian owners that would like to obtain a Frenchlanguage manual, see “Canadian Owners” in theIndex of your vehicle’s owner manual.

Litho in U.S.A.Part No. 15264310 A First Printing ©2005 General Motors Corporation. All Rights Reserved.

ii

Overview .........................................................1-2Navigation System Overview ............................1-2

Getting Started ...............................................1-4Cleaning the Video Screen .............................1-10

Section 1 Overview

1-1

OverviewNavigation System Overview

1-2

A. P (Power/Volume) Knob. See “Hard Keys” underUsing the Navigation System on page 2-2.

B. Directional Indicator. See Symbols on page 2-6.C. DVD/CD Loading Slot

D. X (DVD/CD Eject) Key

E. NAV (Navigation) Key. See “Hard Keys” under Usingthe Navigation System on page 2-2.

F. NAV RPT (Navigation Repeat) Key. See “HardKeys” under Using the Navigation System onpage 2-2.

G. BAND Key. See “Playing the Radio” underNavigation Audio System on page 3-2.

H. w SEEK x Key. See “Finding a Station” underNavigation Audio System on page 3-2.

I. B (CD) Key. See “Playing a CD” under NavigationAudio System on page 3-2.

J. e (Audio) Key. See Navigation Audio System onpage 3-2.

K. CONFIG (Configure) Key. See “Hard Keys” underUsing the Navigation System on page 2-2.

L. O (Tuning) Knob. See “Finding a Station” underNavigation Audio System on page 3-2.

M. V (Zoom In) Screen Button. See “Touch SensitiveScreen Buttons” under Using the NavigationSystem on page 2-2.

N. Dest (Destination) Screen Button. See “TouchSensitive Screen Buttons” under Using theNavigation System on page 2-2.

O. Nav (Navigation) Options Screen Button. See“Touch Sensitive Screen Buttons” under Using theNavigation System on page 2-2.

P. Nav y (Navigation Menu) Screen Button. See“Touch Sensitive Screen Buttons” under Using theNavigation System on page 2-2.

Q. U (Zoom Out) Screen Button. See “Touch SensitiveScreen Buttons” under Using the NavigationSystem on page 2-2.

R. Clock. See “Clock” under Configure Menu onpage 2-32.

1-3

Getting StartedBefore you begin to operate the navigation system, readthis manual thoroughly to become familiar with it andto understand how the system works.

Keeping your mind on the drive is important for safedriving. See “Defensive Driving” in the Index ofyour vehicle’s owner manual for more information.Get familiar with your vehicle’s navigation system soyou can use it with less effort and take full advantage ofits features. Your navigation system includes not onlynavigation, but also audio functions. While yourvehicle is parked:

• Familiarize yourself with all of its controls: hardkeys on the faceplate and touch-sensitive screenbuttons.

• Familiarize yourself with its operation.

• Set up your audio by presetting your favoritestations, setting the tone, and adjusting thespeakers. Then, when driving conditions permit, youcan tune to your favorite stations using thepresets and steering wheel controls (if equipped).

• Set up the navigation features that can only be donebefore you begin driving, such as entering anaddress or a preset destination.

Entering a destination or alphanumeric text requiresmany steps, so you can only perform these operationswhen the vehicle is in PARK (P). You will noticethat touch-sensitive screen buttons leading to thealphanumeric keyboard are dimmed out while driving.

Other functions may also be locked out while driving andthey too will appear grayed out on the screen — butall functions are available when parked. Some functionscan be performed while driving, as long as you cando so without diverting too much of your attention fromyour driving.

{CAUTION:

This system provides you with a far greateraccess to audio stations and song listings.Giving extended attention to entertainmenttasks while driving can cause a crash and youor others can be injured or killed. Always keepyour eyes on the road and your mind on thedrive — avoid engaging in extended searchingwhile driving.

1-4

{CAUTION:

Looking at the moving map on the navigationscreen frequently or for too long while drivingcan cause a crash and you or others can beinjured or killed. Keep your eyes and mind onthe road and avoid looking too long or toooften at the moving map on the navigationscreen. Use the voice guidance directionswhenever possible.

The navigation system allows you to do the following:

• Plan a route with provided turn-by-turn routeand map guidance with voice prompts.

• Select a destination using various methods andchoices.

The information in the system may not always becomplete. Road conditions such as prohibited turns,detours, and construction zones, change frequently. It isimportant to consider whether you can follow thedirections given by the system for the current conditions.

When getting started, you may set the navigationsystem to your preference using various options. Youwill also need to know how to perform various functionsto begin route guidance. Reference the followingtopics for further information:

Setting Radio Station PresetsTo set preset radio stations, do the following:

1. Press the power/volume knob to turn the system on.

2. Press the BAND hard key to access the band menuand select the desired band (AM, FM1, FM2, XM1,or XM2 (if equipped)).

3. Use the tuning knob or the SEEK hard key arrowsto select a station.

4. Touch and hold one of the six screen buttons at thebottom of the screen until you hear a beep or seethe station displayed on the selected preset button.

1-5

Setting the TimeTo set the time, do the following:


2. Press the CONFIG hard key.

3. Touch the Clock screen button.

4. Touch the appropriate Time Zone screen button.

5. Touch the Daylight Savings screen button.

The time is now set. Touch the Manual Adjust screenbutton if you need to further adjust the time. The radiowill use the GPS satellite to set the time. The vehicleneeds to be in an open area to receive the signal.See Global Positioning System (GPS) on page 2-35 formore information.

Entering an Address, Point of Interest,Home, and Preset DestinationsBefore entering an Address, Point of Interest, Home, orPreset Destination, select the appropriate searcharea that contains the final destination. Your vehiclemust be stopped to perform this operation.

Setting the Search AreaTo set the search area, do the following:


2. Insert the DVD map disc into the CD slot.

3. A notice may appear. Touch the NEXT screenbutton to proceed.If the radio is already on with a map disc inserted,push the NAV hard key.

4. Touch the DEST screen button.

5. Touch the Change screen button.

6. Touch the appropriate Search Area numberedscreen button that contains your final destination.

The system will return to the Destination menu.

1-6

Entering an AddressTo set a destination by entering a street address, do thefollowing:





5. Verify that the selected Search Area is correct.

6. Touch the Address screen button.

7. Enter the street name using the alpha keypad onthe screen.Do not enter directional information or street type,and use the space symbol screen button (U)between street or city names. For example, thestreet name N. Royal Oak Rd. should be entered asroyalUoak. Use the backspace (V) screenbutton if an incorrect character has been entered.

8. Select the desired street name from the list bytouching the screen button next to the correctstreet name.

9. Enter the address number using the numerickeypad on the screen. You may first have to selectthe correct range for the address number, thenenter the desired address and touch the OK screenbutton.

10. Touch the Enter Destination screen button.The address entry is now complete.

11. Once you begin driving you will hear an audioprompt to “Proceed to the highlighted route.”You are now in route guidance mode.

Entering a Point of Interest (POI)To set a destination by entering a Point of Interest (POI),do the following:





5. Verify that the selected Search Area is correct.

6. Touch the POI screen button.

1-7

7. Enter the specific title of the POI in the Namespace (i.e. Washington Monument) using thealpha keypad on the screen.

• If there are POIs with the same name, spell outthe name and then touch the List screen button(McDonald’s restaurant vs. McDonald corporateoffice).

• Select the business desired.

• The system will list the POIs in alphabeticalorder or, if there are multiple POIs with the samename, the system will list the POIs in order ofdistance from your location.

• Touch the screen button next to the address ofthe POI desired.

8. Touch the Enter Destination screen button.The POI entry is now complete.

9. Once you begin driving you will hear an audioprompt to “Proceed to the highlighted route.”You are now in route guidance mode.

Using the Category or City selections will aid the systemin finding your POI by limiting the search options.

Setting Home Destination1. Press the power/volume knob to turn the system on.



4. Touch the Nav y (navigation) menu screen button.

5. Touch the Memory Points screen button.

6. Touch the Register Home screen button.

7. Touch the Address screen button and then enter alladdress information.

8. Touch the Register Point screen button to store thehome address as a memory point.

1-8

Setting Preset Destinations1. Press the power/volume knob to turn the system on.



4. Touch the Nav y (navigation) menu screen button.

5. Touch the Memory Points screen button.

6. Touch the Register screen button.

7. Touch one of the five preset buttons.

8. Touch the Address screen button and then enterthe address information.

9. Touch the Register Point screen button to store thememory point.

Using Your Home or PresetDestinationsThese destinations are available for selection whiledriving.




4. Touch the L (Home symbol) or one of theavailable Preset Destination symbols at the bottomof the Destination screen.

5. Once you begin driving, or if you are alreadydriving, you will hear an audio prompt to “Proceed tothe highlighted route.” You are now in routeguidance mode.

1-9

Canceling GuidanceGuidance will be canceled once you arrive at your finaldestination. To cancel guidance prior to arrival at thefinal destination, do the following:

1. From the map screen, touch the Nav Optionsscreen button.

2. Touch the Cancel Route screen button.

3. Touch the Yes screen button to confirmcancellation.

Cleaning the Video ScreenWhen cleaning the video screen, use only a soft cleancotton cloth dampened with clean water.

1-10

Features and Controls ......................................2-2Using the Navigation System ...........................2-2Maps ............................................................2-5Symbols ........................................................2-6Navigation Menu ............................................2-8Destination ..................................................2-18Colors on the Screen ....................................2-31

Configure Menu ............................................2-32Global Positioning System (GPS) ....................2-35Vehicle Positioning ........................................2-36Problems with Route Guidance .......................2-37If the System Needs Service ..........................2-37Ordering Map DVDs ......................................2-37Database Coverage Explanations ....................2-37

Section 2 Features and Controls

2-1

Features and Controls

Using the Navigation SystemThis section includes the basic information to operatethe navigation system.

The main navigation menu displays a number of optionswhich offer information on a variety of topics. SeeNavigation Menu on page 2-8 for more information.

Use the hard keys located on the navigation systemalong with the available touch-sensitive screen buttonson the navigation screen to operate the system.

Once the vehicle is moving, various functions will bedisabled to reduce driver distractions.

Hard KeysThe following hard keys are located to the left of thenavigation screen:

P (Power/Volume Knob): Press the power/volumeknob to turn the audio and navigation system on and off.Turn the knob to increase or decrease the volume tothe audio system.

NAV RPT (Navigation Repeat): Press the NAV RPTkey to repeat the current voice guidance navigationprompt.

NAV (Navigation): If you are in a menu and are not onthe map screen, press the NAV key to view the mapshowing your vehicle’s current position.

If a route has not been planned, press this key todisplay the map screen and the following information:

• North or Heading Up symbol

• Time

• Map scale

If a route has been planned, press this key to displaythe map screen and the following information:

• Number of miles/kilometers between current vehicleposition and the destination. See “Route OverviewMenu” under Destination on page 2-18 for moreinformation.

• Estimated travel time to the destination. See “RouteOverview Menu” under Destination on page 2-18 formore information.

• Highlighted route or turn-by-turn instructions.See “Map Appearance” under Navigation Menu onpage 2-8 for more information.

You will find more information on each feature found ona map screen later in this manual.

2-2

BAND: Press the BAND key to access the BANDscreen and to switch between AM, FM1, FM2, XM1, orXM2, if equipped. See “Finding a Station” underNavigation Audio System on page 3-2.

x SEEK w: Press the SEEK up or down arrows togo to the next or previous radio station and staythere. See “Finding a Station” under Navigation AudioSystem on page 3-2.

B (CD): Press the CD key to play a CD. The CDscreen will display. See “Playing a CD” under NavigationAudio System on page 3-2.

e (Audio): Press the audio key to access the Audiomenu. See Navigation Audio System on page 3-2.

CONFIG (Configure): Press the CONFIG key to accessthe Configure menu. See Configure Menu on page 2-32for more information.

O (Tuning) Knob: Turn this knob to go to the nextor previous frequency and stay there. See “Findinga Station” under Navigation Audio System on page 3-2.

X (Eject): Press the eject key located next to theDVD/CD slot to eject a map DVD or CD.

Alpha-Numeric KeypadLetters of the alphabet, symbols, punctuation, andnumbers will display on the navigation screen as analpha or numeric keypad. The appropriate keypadwill automatically display whenever the system needsinformation from you. The alpha keypad will displaywhen the system needs input of a city or street name.The numeric keypad will display when the system needsinput of a phone number or house address.

Touch a character on the screen to select it. You mayalso touch the 0 - 9 screen button at any time fromthe alpha keypad to access the numeric keypad.

U (Space): Touch this screen button to enter aspace between characters or the words of a name.

V (Backspace): Touch this screen button if anincorrect character has been selected.

To make name selections easier, the system will onlyallow you to select a character which can follow the lastone entered. For example, if a Z is entered, a T willnot be available to select. The system will highlight theavailable characters.

If a name is not available after input, it may need to beinputted differently, the map DVD database may notcontain that information, or the correct search area hasnot been selected. See Database CoverageExplanations on page 2-37.

2-3

Touch-Sensitive Screen ButtonsTouch-sensitive buttons, or screen buttons, are locatedon the screen. After selecting a button on the screen,a beep will sound. This feature can be turned off.See Configure Menu on page 2-32 for more information.Screen buttons will be highlighted when available.There are some toggle screen buttons that will be lightblue when active.

The following touch-sensitive screen buttons will appearfrequently at the bottom of a map screen.

Dest (Destination): Touch this screen button to displaythe Destination menu. See Destination on page 2-18for more information.

Nav (Navigation) Options: Touch this screen button todisplay the Nav Options menu. See “NavigationOptions” under Destination on page 2-18 for moreinformation.

Nav y (Navigation Menu): Touch this screen buttonto display the main navigation menu. See NavigationMenu on page 2-8 for more information.

V (Zoom In): Touch this screen button to get a closerlook at a smaller section of the route you are traveling.

U (Zoom Out): Touch this screen button to see alarger scale of the route you are traveling. You can alsoview your highlighted route.

Clock: Touch the clock screen button, when the radiois on, to display the date.

Audio Source: Touch the audio source screen button,while a map screen is displayed, to access the Audioscreen.

Back: Touch this screen button, when available on amenu, to return to the previous screen.

2-4

MapsThis section includes basic information about the mapdatabase.

The maps are stored on a DVD-ROM. The United States,Hawaii, and Canada are contained on one disc. The mapdatabase includes interstate freeways, state highways,country roads, and major and general streets.

Refer to the “Navigation System Map Disc” manual toview the explanation of map coverage. The mapdisc manual will be in the map DVD case when thevehicle is delivered from the factory.

Installing the Map DVDYour dealer may have installed the map DVD. If themap DVD was not installed, do the following:

1. Turn the ignition on.

2. Load the map DVD into the slot by inserting itpartway. The system will pull it in.

Once the map DVD is inserted correctly, you will havethe following two language choices:

• ENG (English)

• FR (French)

Select the language at this time. See “Language” underConfigure Menu on page 2-32 for more information.Once a language has been selected, touch the NEXTscreen button to plan a route. The map will appearshowing your vehicle’s current position.

2-5

Map Adjustments and ScalesThe system allows you to adjust the scale of view onthe map. The map will scroll automatically based on thedirection the vehicle is traveling.

To view a larger or smaller scale of the map, touchzoom in or zoom out. The scale of a map can rangefrom 1/32 of a mile (0.05 km) to 128 miles (206 km).See “Hard Keys” under Using the Navigation Systemon page 2-2 for more information.

SymbolsThe following symbols are the most common thatappear on a map screen.

Your vehicle is shown asthis symbol. It indicates thecurrent position andvehicle orientation of yourvehicle on the map.

This red bulls-eye symbolwill appear on the map toshow your final destinationafter a route has beenplanned.

See Destination on page 2-18 for information onplanning a route.

2-6

When one of five possibledestinations have beenset, a circle with a number1 through 5, dependingon which numberdestination it is, will appearon the map screen.

See “Preset Destinations” under Destination onpage 2-18 for more information.

This symbol indicates thatthe map is shown withNorth Up (North Up mode).

While in North Up mode, North will always be at the topof the map screen regardless of which direction thevehicle is traveling. Touch this screen button to switchbetween North Up and Heading Up modes. See “MapAppearance” under Navigation Menu on page 2-8for more information.

This symbol indicates thatthe map is shown with thevehicle travel direction up(Heading Up mode).

The shaded triangle indicates North. While in HeadingUp mode, the direction your vehicle is traveling willalways be at the top of the map screen. Touch thisscreen button to switch between Heading Up andNorth Up modes. See “Map Appearance” underNavigation Menu on page 2-8 for more information.

2-7

Navigation Menu

Nav y (Navigation Menu): Touch the navigationmenu screen button at the bottom of the map screen toaccess the main navigation menu.

The main navigation menu allows you to select from alist of options and to use the available touch screenbuttons to make system adjustments and plan routes.

2-8

You will be able to select from the following items onthe main navigation menu:

Suspend Guidance

} (Suspend Guidance): Select this screen buttonfrom the Nav Menu to suspend guidance to all currentand programmed destinations, but the current routewill be retained in memory. You will no longer receivevoice prompts for navigation. The map can still beviewed by pressing the NAV hard key. If you suspendguidance, you can touch the Resume Guidancescreen button to resume the current route.

Route Overview

z (Route Overview): Select the Route Overviewscreen button to display the map with the routehighlighted. The total distance and estimated travel timewill also display.

Map Appearance

v (Map Appearance): Select the Map Appearancescreen button to adjust the appearance of a map basedon your preferences.

This menu is divided into three sections: MapOrient (orientation), Guidance Mode, and Map Mode.Touch an option’s screen button to select it. Thefollowing are brief explanations of the options availablein each section:

y (North Up): This feature orients the map withNorth at the top of the map screen, regardless of whichdirection you are driving.

2-9

u (Heading Up): This feature orients the map withthe direction you are driving at the top of the mapscreen, regardless of which direction is North.

u (3D view): This feature gives maps a3-dimensional view, and will remain in the HeadingUp position.

s (Arrow): This feature continually displaysdirectional turn guidance for your next maneuver.

R (Turn list): This feature lists information on yournext three maneuvers, including the distance to the turn,and street names.

? (Map): This feature will display your vehicle’scurrent position, with the calculated route highlighted.

P (Single): This feature allows one map to bedisplayed.

| (Split Screen): This feature allows two maps to bedisplayed, which can be independently adjusted inboth scale and map orientation.

For more information on the symbols that can appearon a map screen, see Symbols on page 2-6.

Voice Volume

! (Voice Volume): Select the Voice Volume screenbutton to adjust the volume of the voice guidanceprompts that provide various messages as you approachpoints where you need to maneuver your vehicle,such as an intersection.

2-10

To adjust the volume of the voice prompts, do thefollowing:

1. Touch the Voice Volume screen button.

2. Touch the plus (+) or minus (−) sign screen buttonsto increase or decrease the volume. The voiceprompt will come on with each adjustment to giveyou an idea of the volume at each level.

3. Once you have reached the desired volume level,touch the Back screen button to return to theprevious screen.

Adaptive Voice Volume Control: The volume of voiceprompts will increase automatically once the vehicleexceeds 50 mph (80 km/hr). Touch the On screen buttonto activate this feature, or the Off screen button toturn this feature off.

If voice guidance is not needed, lower the volume as faras it will go, so the voice prompts are not heard.

Edit Route

t (Edit Route): Select the Edit Route screen buttonto recalculate a route based on your preferences.

Search Condition: This screen allows you to selectyour route preference by choosing from Fastest,Shortest, or Alternative route. By selecting the Fastestroute, you will be routed along main roads andhighways, which does not necessarily mean it will bethe shortest route.

2-11

Route Preference: This screen allows you to selectyour road preferences by setting which types ofroads you want to use or avoid.

Destination: This feature allows you to add, reorder, ordelete destinations.

Set Preferred Road: This feature allows you to add,modify, or delete road preference settings.

Route Overview: Touch this screen button to accessthe Route Overview menu. See “Route Overview” underDestination on page 2-18.

Route Preview

{ (Route Preview): Select the Route Preview screenbutton once route guidance has begun to display themap screen with the route highlighted.

The route is traced by the vehicle symbol as you travel.You can preview the route from the starting positionto the final destination by touching the arrow screenbuttons inside the Route Preview pop-up menu.

Info (Information): Touch the Info screen button toview POI information such as the POI name, address,and phone number, if available.

2-12

Edit: Touch the Edit screen button to select a POI asthe next destination you would like to preview.

To preview a POI’s destination instead of the finaldestination, do the following:

1. Touch the Edit screen button.

2. Touch the Select POI screen button.

3. Touch the screen button of the desired POIcategory.

4. Touch the icon screen button of the desired POI,then touch the OK screen button.

5. Touch the Back screen button twice to get to theEdit Route Preview screen.

6. Touch the Next POI screen button, then touch theOK screen button.

7. Touch the Back screen button to return to theRoute Preview screen.Now when you touch the arrow screen buttons topreview the route, it will trace the route to thenext selected POI rather than the route to the finaldestination.

To return to previewing the route to the final destination,do the following:

1. Touch the Edit screen button.

2. Touch the Next screen button.

3. Touch the OK screen button, then the Back screenbutton to return to the Route Preview screen.Now when you touch the arrow screen buttons topreview the route, it will trace the route to thefinal destination rather than the route to thenext POI.

Use the following arrow screen buttons from the RoutePreview pop-up menu to trace a route:

Iq (Preview to current location): Touch this screenbutton to preview the route traveling toward thevehicle’s current location. Touch this screen buttonrepeatedly to increase the speed at which the indicatorwill trace the route.

rh (Preview to final destination): Touch thisscreen button to view the route traveling toward the finaldestination. Touch this screen button repeatedly toincrease the speed at which the indicator will tracethe route.

It (View current location): Touch this screenbutton to view the vehicle’s current location along thecurrent route.

uh (View final destination): Touch this screenbutton to view the final destination along the currentroute.

2-13

Navigation Setup

x (Navigation Setup): Select the Nav Setup screenbutton to display the Nav Setup menu.

From this menu, several options may be selected,adjusted, or turned on and off. Touch the up or downarrow screen buttons to the left of the menu options toscroll through the list. The following are the availableoptions with a brief explanation of each:

English/Metric: This feature switches distancemeasurements between English or metric. Touch theMiles screen button for English measurements, orthe Km (kilometers) screen button for metricmeasurements.

Notify Seasonal Restrict (Restrictions): This featurenotifies the driver of seasonal maneuver restrictions.Touch the On screen button to have a voice prompt warnof existing seasonal restrictions played at guidancepoints. Touch the Off screen button to turn this feature off.

Estimated Travel Time: This feature displays theestimated time to travel from your current position to thedestination. Touch the On screen button to have theestimated travel time displayed with the distanceto destination, or the Off screen button to turn thisfeature off.

Enter Speed Change?: This feature allows you toadjust estimated speeds for Freeway, Main street, orResidential driving. These speed values are used tocalculate estimated travel time. To change estimatedspeeds, touch the Yes screen button. The Change Speedmenu will appear. Touch the arrow screen buttons undereach road type to increase or decrease the speed. Themaximum allowable speed to set is 100 mph (161 km).You may also touch the Default screen button to choosefactory default speed settings as your choice. When youradjustments are complete, touch the Back screen buttonto return to the Nav Setup menu.

Auto Reroute: With this feature on, the navigationsystem will automatically recalculate a route if you driveoff course. Touch the Off screen button to turn thisfeature off.

2-14

Voice Guide in All Mode: Touch the On screen buttonto hear navigation voice prompts while in Audio mode.Touch the Off screen button to turn this feature off.

Current Street Name: Touch the On screen button todisplay the current street name that the vehicle istraveling on. Touch the Off screen button to turn thisfeature off.

Exit Information: This feature will display map iconswhich can be selected to display the next exit’sinformation, including Point of Interest (POI) facilitiessuch as gas stations, restaurants, and lodging. Touchthe On screen button to display exit information icons, ortouch the Off screen button to cancel the display ofexit information icons.

Map Color (Day): This feature allows you to adjust thedaytime map appearance. Choose between Normal,Auto, 1, 2, 3, or 4. The numbered settings vary the colorscheme of the map display. The Auto setting willchange the map appearance automatically everythree months. When the desired color setting has beenselected, press the NAV hard key to view the adjustedmap color.

Map Color (Night): This feature allows you to adjustthe nighttime map appearance. Choose betweenNormal, Auto, 1, 2, 3, or 4. The numbered settings varythe color scheme of the map display. The Auto settingwill change the map appearance automatically everythree months. When the desired color setting has beenselected, press the NAV hard key to view the adjustedmap color.

Calibrate System?: This feature will calibrate wheelspeed to assist in the calculation of vehicle position.This feature also allows you to manually reposition thevehicle symbol on the map. You may need to calibratethe system following a tire change, rotation, or ifyour vehicle has been relocated a great distance.Touch the Yes screen button to calibrate the system, orthe No screen button to leave the calibration as it is.See Vehicle Positioning on page 2-36 for moreinformation.

Select Defaults?: This feature allows you to restore allavailable factory default settings in the Nav Setupmenu. Touch the Yes screen button to restore defaults,or the No screen button to retain the current settings.

2-15

Memory Points

w (Memory Points): Select the Memory Points screenbutton to display the Memory Points menu. This menucontains options for registering, deleting, and editingmarked points stored in memory, such as memorypoints, preset destinations, and areas to avoid.

Memory Points: Choosing to add a memory point willtake you to the Destination menu. You may registerup to 30 memory points. The name, location,information, and icon for a memory point may alsobe edited.

Preset Dest (Destination): Five preset destinations,as well as one for home, may be registered oredited. The five preset destinations, home, andEmergency are the only destination selections availablefrom the Destination menu while the vehicle is moving.These presets are shown as the home symbol andnumbered presets 1 through 5 at the bottom ofthe Destination menu. See Destination on page 2-18for more information on how to register Memory Pointsand preset destinations.

Areas to Avoid: Up to 10 areas to avoid may also beregistered from the Memory Points menu. Areas toavoid include areas such as high traffic areas,construction areas, or any main roads, or intersectionsyou want to avoid. When registering or editing anarea to avoid, the size of the area may also beincreased or decreased by touching the up or downarrow screen buttons on the scroll bar.

2-16

Register Home: Touch this screen button to accessthe Register Home screen. Choose a method ofdestination entry and enter the destination you wouldlike to store as home. Once your entry is complete,touch the Register Point screen button to store this pointas home. Each time you touch the home symbol fromthe bottom of the Destination screen, this destination willbe calculated.

Once you have stored a destination as home, theRegister Home screen button will change to readDelete Home. You may then touch this screen buttonto delete the destination you have stored as home.

Del. Prev. Dest. (Delete Previous Destination):Touch this screen button to delete a previousdestination. A list of previous destinations will display onthe Delete Previous Dest screen. Touch the screenbutton next to the previous destination you wishto delete. You will be asked to confirm your decision.Touch the Yes screen button to delete the destination ortouch the No screen button to cancel the deletion.

You may also touch the Del. All screen button from theDelete Previous Dest screen to delete all previousdestinations listed. You will be asked to confirm thisdecision as well. Touch the Yes screen button to deleteall previous destinations or touch the No screenbutton to cancel the deletion.

2-17

DestinationThe Destination menu gives several ways to plan aroute by entering destination points.

Touch the Dest screen button at the bottom of the mapscreen to display the Destination menu.

2-18

Search Area: The Destination menu allows you toselect the area to be searched for your destination.A map of the 48 contiguous United States, includingHawaii, and Canada will be shown. The map is dividedinto nine regions.

Before selecting a destination, review the search areamap on the right side of the menu to make sureyour destination is located in the highlighted region.

Change: Touch this screen button, on the Destinationmenu, to see a more detailed search area map witha list of states, or to change the search area. TheSearch Area screen will appear. Touch the numberedscreen button to the left of the map that correspondswith the numbered region you wish to choose.

Delete Dest (Destination): Touch the Delete Destscreen button on the Destination menu to deletethe current destination.

k / l (Up and Down Arrows): Touch the up or downarrow screen buttons, on the Destination menu, toscroll through the pages of the menu.

Once your destination entry is complete, a screenwith the destination preview menu will display. See“Destination Preview Menu” later in this section for moreinformation.

2-19

To enter a destination, choose from one of the followingdestination entry methods:

Preset DestinationsThe preset destination entry method allows youto select destinations that were registered aspresets 1 through 5.

These presets, along with the home symbol preset, arelocated at the bottom of each page of the Destinationmenu. Besides the home preset destination andEmergency destination entry method, these are theonly presets available for selection while the vehicleis moving.

AddressThe Address destination entry method allows you toinput an address by providing the system with a housenumber, street name, and city name.

If you know the city where the address is located, touchthe City screen button. The City screen allows you toselect from the last five cities entered, the nearestfive cities to the current location, or you may enter inthe name of the city. Touch the Input City Name screenbutton and enter in the city using the alpha keypad.See “Alpha-Numeric Keypad” under Using theNavigation System on page 2-2 for more information.

2-20

Use the same city name that you would use whenmailing a letter. The system will search for an entryexactly as you have entered it. If you did not include aspace between words where necessary, the systemmay not be able to find the desired location. Asinformation is entered, the system will automaticallysearch for available names, and the List screen buttonwill become available. Touch the List screen buttonto view name choices and select the desired city name,or touch the Back screen button to continue to spellthe city name, further reducing the number of availableitems. The box at the end of the Street entry fieldwill contain the number of city names available in thecurrent generated list. If you do not know the city,proceed to entering the street name.

Enter the street name using the alpha keypad. See“Alpha-Numeric Keypad” under Using the NavigationSystem on page 2-2 for more information. Do not includename extensions such as N. or Drive. For example,the street name N. Civic Center Drive should be enteredas CivicUCenter. The system will search for anentry exactly as you have entered it. If you did notinclude a space between words where necessary, thesystem may not be able to find the desired location.

As information is entered, the system will automaticallysearch for available names, and the List screenbutton will become available. Touch the List screenbutton to view name choices and select the desiredstreet name, or touch the Back screen button to continueto spell the street name, further reducing the numberof available items. The box at the end of the Street entryfield will contain the number of street names availablein the current generated list.

Once the street name has been selected, enter thehouse number using the numeric keypad. The systemwill list the house number range that is available for thestreet. When you have finished entering the housenumber, touch the OK screen button. If the addressnumber exists on more than one street that shares thesame name, a list of matching street names willdisplay. Touch the screen button by the desiredstreet name.

If you have not already entered in the city name for theaddress, a list of cities that contain the address willdisplay. Touch the screen button by the desired city toselect it.

2-21

Point of Interest (POI)The Point of Interest (POI) destination entry methodallows you to choose a destination from the POIlist. Select the POI screen button from the Destinationmenu to access the POI entry menu. The POIs inthe database are cross referenced between Name,Category, and City.

Search for a POI by using a combination of the followingthree methods:

• Type in a POI by name using the alpha-numerickeypad. As you type in a name, the system willsearch for an available match. Select thedesired POI.While inputting a POI or city name, the List screenbutton will become available. The box at theend of the Name entry field will contain the numberof items in the current generated list. Touch theList screen button to view the list of availablenames, or continue to spell the name to furtherreduce the list.

• Select a POI by selecting the Category option.Select a category from the list. If the list of availablePOIs for the category selected is still too long,you may need to input the name or city for the POI.

• Touch the City screen button and type in thecity you wish to select a POI from.

If an arrow appears to the right or left of the item name,the complete name is too long for the display. Touchthe right or left arrow screen buttons to scroll to the endor beginning of the name.

The POI for Restaurant is broken down into severalcategories. Select the Restaurant screen button from thePOI choices. A list of cuisine types will then appear.

2-22

Memory PointsThe Memory Points destination entry method allows youto select a destination by choosing from a list ofmarked points on the map that were previously marked.

Memory points include up to 30 saved points, five presetdestinations, and a home destination. Select theMemory Points screen button from the Destinationscreen to select any one of the marked points as theactive destination. Marked points can also be sorted byicon, date saved, or alphabetically.

If a memory point has been registered, you can select anicon to correspond with that memory point. To registerthat memory point with a sound, touch the With Soundscreen button, then select a sound.

See “Memory Points” under Navigation Menu onpage 2-8 for more information.

Previous DestinationThe Previous Destination entry method allows you toselect a destination by selecting from a list of previouslyentered destinations.

Touch the number next to the destination to select it.

2-23

EmergencyThe Emergency destination entry method allows youto select a destination by selecting from a list ofemergency facilities. The list will vary by area.

Selecting Police Station or Hospital will display a list.The list can be changed to appear in alphabetical orderor in order by distance from your vehicle’s location.The Emergency destination entry method can beselected while the vehicle is moving.

MapThe Map destination entry method displays the lastlocation on the map, and the road preference.

Scroll across and touch the map at the location youwould like to set as your destination. Once youhave located the desired destination, touch the EnterDestination screen button and then the OK screenbutton. The route will then be calculated. Begin drivingto start route guidance or touch the Route screenbutton and then the Start screen button.

You can zoom out to view the entire regional map.See “Touch-Sensitive Screen Buttons” under Using theNavigation System on page 2-2 for more information.However, if you zoom out as much as possible andscroll around the map, some parts of the map willappear to be missing because they are not readable inlarger scales.

Previous Start PointThe Previous start point destination entry method allowsyou to select the last start point as a destination.

2-24

Phone NumberThe Phone Number destination entry method allows youto search for a point of interest (POI) destination byentering the POI phone number.

Enter the POI phone number on the numeric keypadand touch the OK screen button. The destinationlocation will display. Most phone numbers for POIsincluded in the DVD database can be entered to locatea destination. Cellular phone numbers and internalcompany phone numbers cannot be entered to locatea destination.

IntersectionThe Intersection destination entry method allows you toselect a destination by inputting the intersecting roads.

To enter a destination using this method, enter thename of the street, but do not include name extensionssuch as N. or Drive. For example, the street nameN. Civic Center Drive should be entered asCivicUCenter. The system will search for an entryexactly as you have entered it. If you did not includea space between words where necessary, the systemmay not be able to find the desired location. This willbring up a list of streets with that name. Select thedesired street name from the list.

2-25

Now begin entering the second street name, and selectthe desired street name from the list. After both streetnames in the intersection have been selected, alist of cities containing the selected intersection willappear. If there are several cities that contain thatspecific intersection, you must specify a city. Select thedesired city from the list. The route will then becalculated. Begin driving to start route guidance ortouch the Route screen button and then the Startscreen button.

Freeway Entrance/ExitThe Freeway Entrance/Exit destination entry methodallows you to select a destination by entering a freewayentrance or exit point.

Enter Freeway names using the alpha keypad. See“Alpha-Numeric Keypad” under Using the NavigationSystem on page 2-2 for more information. After enteringthe freeway name, enter the name of the entrance orexit that you want to set as the destination.

2-26

Destination Preview Menu

Each time a destination is entered, a screen with thedestination preview menu will appear. This screenwill display a zoomed in view of the destination, as wellas the following options:

Enter Destination: Touch this screen button to set thecurrent destination as the only destination in thesystem. The route will be calculated and the RoutePreview screen will display.

Add Waypoint: Touch this screen button to add thecurrent destination to your current trip. The AddWaypoint screen will display. Touch the Add screenbutton that corresponds with where you would liketo add the current destination.

Info (Information): When a POI icon is selected on thescreen, touch this screen button to display the name,address, and telephone number, if available, forthe selected POI. See “Navigation Options” later in thissection for more information on POIs and their icons.

Route Preference: This option will display theRoute Preference screen. To adjust route preferences,touch Change. See “Edit Route” under NavigationMenu on page 2-8 for more information.

Once the desired adjustments from the destinationpreview menu are complete, the route overview menucan be displayed. See “Route Overview Menu” followingin this section for more information.Once you have entered your destination by touching theEnter Destination screen button, you can do one ofthe following:

• Press the NAV hard key to begin route guidance.

• Start driving to begin route guidance.

• Touch the Route screen button on the map screendisplaying the new destination to make furtherchanges. See “Route Overview” following in thissection for more information.

2-27

Route Overview MenuEach time a destination has been selected and entered,the route overview menu can be displayed by touchingthe Route screen button on the map screen.

The following three options will display:

Start: Touch this screen button to select the currenthighlighted route and begin route guidance.

3 Routes: Touch this screen button to display the mapwith three highlighted routes shown in three differentcolors indicating the Fastest, Shortest, and Alternativeroutes.

After selecting one of the three routes, the road distanceand estimated travel time will display. The Fastestroute means you will be routed along main roads andhighways, but does not necessarily mean it is theshortest route. Touch the Time & Distance screen buttonto view the road distance and estimated travel timefor each of the three routes.

Edit Route: Touch this screen button to change theroute preferences. See “Edit Route” under NavigationMenu on page 2-8 for more information.

Press Back at any time to return to the previous screen.

2-28

Navigation Options

Once a destination is selected and you begin yourroute, touch the Nav Options screen button to view amenu with additional route options. Select from thefollowing route options:

POI Icon Off: This option allows you to turn off Point ofInterest (POI) icons shown on the map.

POI Selection: This option allows you to select whichtypes of POIs will be displayed on the map.

After selecting POI selection, the POI Selection screenwill appear and display the different POI categories.You can select up to five different POI categoriesby touching the categories on the screen. Touch theMore screen button to view more categories. The iconsfor the selected categories will appear at the top ofthe screen and will display on the map.

Nav Options Menu shown with a Set Destination

2-29

To view a list of local POIs, touch the Local POI Listscreen button. The Local POI List screen will listthe closest POIs from the categories you have selected.You can sort these POIs by distance, icon/category,or name. Touch the Route screen button to display POIsalong your current route. Once you select the desiredPOI, a map of the area with a symbol marking thedestination will display.

Suspend Guidance: This option allows you to suspendactive route guidance for all current and programmeddestinations. See “Suspend Guidance” under NavigationMenu on page 2-8 for more information.

Cancel Route: This option allows you to cancel thecurrent or first destination. The second programmeddestination will then be used if one is available.

Change Route: This option allows you to change theroute search condition while the vehicle is moving.The following options may be available:

• Detour for 1 mile?: Touch the Yes screen button torecalculate your route and detour one mile aroundthe vehicle’s current position.

• Detour for 3 miles?: Touch the Yes screen button torecalculate your route and detour three milesaround the vehicle’s current position.

• Change to fastest?: Touch the Yes screen button torecalculate to the fastest route.

• Change to shortest?: Touch the Yes screen buttonto recalculate to the shortest route.

• Reroute from adjacent road?: Touch the Yes screenbutton to recalculate from another road on yourroute, near the vehicle’s current position.

Register Point: This option allows you to register amarked point or memory point. See “Memory Points”under Navigation Menu on page 2-8 for moreinformation.

2-30

Right Screen: If a split-screen is currently displayed,this option allows you to adjust options for the rightscreen.

If the position on the map is away from the currentvehicle position, touch the Nav Options screen button,to select from the following four options:

POI Icon Off: This option allows you to turn off Point ofInterest (POI) icons shown on the map.

Enter Destination: This option allows you to set alocation you have chosen on the map as yourdestination. See “Map” earlier in this section for moreinformation on this destination entry method.

Add Waypoint: This option allows you to add the mapdestination to your current destinations.

Register Point: This option allows you register amarked point or memory point. See “Memory Points”under Navigation Menu on page 2-8 for moreinformation.

Colors on the ScreenWhen a route has been planned, it will be highlightedon the screen in blue.

Different colors are also used to distinguish betweeninterstate freeways, state highways, county roads, majorstreets, and secondary streets. Highways will beshown as a thicker line than a general street.

2-31

Configure MenuThe Configure menu allows you to set up and adjustsuch things as screen color, appearance, and languageof the display for the navigation system. Press theCONFIG hard key to access the Configure menu.See Navigation System Overview on page 1-2 formore information.

Contrast/BrightnessTo adjust the contrast or brightness of the navigationscreen, touch the plus (+) or minus (–) sign screenbuttons to increase or decrease the contrast orbrightness to the desired level. You will see the screenchange as you adjust the contrast or brightness.

Screen ColorWhen the exterior lamps are on during the day, thenavigation screen will change to a lighter backgroundand change colors for better viewing in the daylight.At night, the screens background will become darker.Touch the Auto screen button for automatic adjustment.

Touch the Day or Night screen buttons to select dayor night mode regardless of the lighting conditions.The Day setting leaves the system in the day mode.The Night setting leaves the system in the night mode.

2-32

BeepWith this feature on, a beep will sound every time ascreen button is pressed on the navigation screen.Select Off to turn the beeps off.

Vehicle Chime

Notice: The chime signals related to seat belts,parking brake, and other functions of your vehicleoperate through the navigation/radio system.If that equipment is replaced or additional equipmentis added to your vehicle, the chimes may notwork. Make sure that replacement or additionalequipment is compatible with your vehicle beforeinstalling it.

This feature allows you to adjust the chime volume levelin your vehicle. Touch the Normal screen button fornormal chime volume or the Loud screen button for alouder chime volume.

LanguageYour vehicle has been set for the English language, butyou may also select French for all instructional textand voice prompts. However, names on the map whenusing the navigation functions will not change.

To change the language, the map DVD must beinserted. Then, do the following:

1. Touch the Language screen button. A caution willdisplay.

2. Touch the desired language to select it.

3. Touch the NEXT screen button to change thedisplay back to the map screen.

If the language is changed from English, the menuscreens will not match word-for-word as they appear inthis manual.

If you accidentally select a language you do notunderstand, press the CONFIG hard key, then selectthe desired language.

2-33

Clock

To adjust the time displayed at the lower right corner ofthe navigation screen, as well as other time options,touch the Clock screen button. This will take you to theAdjust Clock screen.

You may also touch the time display in the lower rightcorner of the navigation screen to briefly displaythe date.

To change the hours and minutes on the clock, do thefollowing:

1. Touch the Manual Adjust screen button.

2. Touch the up or down arrow screen buttons toincrease or decrease the hours and minutes.

3. Touch the Back screen button to return to theprevious screen.

12Hr/24Hr: This feature allows you to choose whetherthe time is displayed in standard or military time.Touch the 12Hr screen button for standard time or the24Hr screen button for military time.

Auto GPS Update: With this feature on, the navigationsystem time will be set to match the current GPStime. The time will be updated with the GPS time whenthe ignition is turned on. Touch the Off screen buttonto turn this feature off.

Daylight Savings: With this feature on, the navigationsystem will automatically adjust the time for DaylightSavings. Touch the Off screen button to turn thisfeature off.

Time Zone: This feature allows you to select fromfive different time zones: HST (Hawaii), PST (Pacific),MST (Mountain), CST (Central), and EST (Eastern).Touch the desired time zone screen button to select it.

2-34

Display OffTo turn the navigation screen off, touch the Disp Offscreen button on the Configure menu. To turn thescreen back on, press any hard key to the left of thenavigation screen.

Global Positioning System (GPS)The navigation system determines the position of yourvehicle by using satellite signals, various vehicle signalsand map data.

The Global Positioning System (GPS) locates thecurrent position of your vehicle using signals sent by theUnited States Department of Defense GPS satellites.While your vehicle is receiving signals from thesesatellites, GPS will not appear on the map screen.

However, at times, other interferences such asthe satellite condition, road configuration, the conditionof the vehicle and/or other circumstances can interferewith the system’s ability to determine the accurateposition of the vehicle. This is when GPS will appear onthe map screen.

The system may not be available or interferences mayoccur if any of the following are true:

• Signals are obstructed by tall buildings, large trucksor a tunnel.

• Metallic objects are located on the dashboard.

• Satellites are being repaired or improved.

• Aftermarket glass tinting has been applied to thevehicle’s windshield.

Do not apply aftermarket glass tinting to the vehicle’swindshield or place metallic objects on the vehicle’sdashboard. Glass tinting and metallic objects willinterfere with the system’s ability to receive GPS signalsand may cause the system to malfunction.

If you are experiencing a problem, see VehiclePositioning on page 2-36 and Problems with RouteGuidance on page 2-37 for more information.

2-35

Vehicle PositioningAt times, the position of the vehicle on the map may beinaccurate due to one or more of the followingreasons:

• The road system has changed.

• The vehicle is traveling on slippery road surfacessuch as sand, gravel, and/or snow.

• The vehicle is being driven on winding roads.

• The vehicle is being driven on a long straight road.

• The vehicle is approaching a tall building or alarge vehicle.

• The surface streets run parallel to a freeway.

• The vehicle has just been transferred by a vehiclecarrier or a ferry.

• The current position calibration is set incorrectly.

• The vehicle is being driven at high speeds.

• The vehicle is repeating a change of direction bygoing forward and backward, or turning on a turntable in a parking lot.

• The vehicle is entering and/or exiting a parking lotor garage with a roof.

• The vehicle has a roof carrier, ski, or bike rackinstalled on it.

• The vehicle has tire chains on it.

• The tires have been replaced.

• The tire pressure is incorrect.

• The tires are worn.

• The battery is disconnected.

• The vehicle is driven in heavy traffic where drivingis at low speeds and the vehicle is stopped andstarted repeatedly.

2-36

Problems with Route GuidanceInappropriate route guidance may occur under any ofthe following conditions:

• You have not turned onto the road indicated by thesystem.

• Route guidance is not available for the next turn.

• The route is not changed during automatic rerouting.

• Plural names of places are displayed.

• You are driving at high speeds, which may causethe automatic rerouting to operate more slowly.

• The route prohibits the entry of a vehicle due to aregulation by time or season or any other regulationwhich may be given.

• A route cannot be found.

• A road is new, was recently changed or is not listedon the DVD. The route to the destination may notbe shown. See Ordering Map DVDs on page 2-37.

If the System Needs ServiceIf you are still experiencing difficulty with the navigationsystem after reading this information, see yourGM dealer for assistance.

Ordering Map DVDsThe map DVD in your vehicle is the most up-to-dateinformation available when your vehicle was purchased.The map DVD is updated periodically, provided thatthe map information has changed. To order a new mapDVD, contact your dealer.

Database Coverage ExplanationsCoverage areas vary with respect to the level of mapdetail available for any given area. Some areas willfeature greater levels of detail than others. If thishappens, it does not mean there is a problem with thesystem. As the map DVD is updated, more detailmay become available for areas which previously hadlimited detail. See Ordering Map DVDs on page 2-37.

2-37

✍ NOTES

2-38

Navigation Audio System ..................................3-2Rear Seat Entertainment System ....................3-15

Section 3 Navigation Audio System

3-1

Navigation Audio SystemNotice: Before adding any sound equipment toyour vehicle, such as an audio system, CD player,CB radio, mobile telephone, or two-way radio, makesure that it can be added by checking with yourdealer. Also, check federal rules covering mobileradio and telephone units. If sound equipment canbe added, it is very important to do it properly.Added sound equipment may interfere withthe operation of your vehicle’s engine, radio, orother systems, and even damage them. Yourvehicle’s systems may interfere with the operationof sound equipment that has been added.

Notice: The chime signals related to seat belts,parking brake, and other functions of your vehicleoperate through the navigation system. If thatequipment is replaced or additional equipment isadded to your vehicle, the chimes may not work.Make sure that replacement or additional equipmentis compatible with your vehicle before installingit. See “Accessories and Modifications” in the Indexof your vehicle’s owner manual.

Your vehicle has a feature call Retained AccessoryPower (RAP). With RAP, the audio system will continueto play even after the ignition is turned off. See“Retained Accessory Power (RAP)” in the Index of yourvehicle’s owner manual for more information.

The audio system is operated using navigationsystem menus.

Playing the Radio

O (Power/Volume): Press this knob to turn the audioand navigation system on and off. Turn the knob toincrease or decrease the volume.

Finding a Station

BAND: Press this hard key to access the band menuand to switch between AM, FM1, FM2, XM1, orXM2, if equipped.

O (Tuning) Knob: Turn this knob to change radiofrequencies.

w SEEK x: Press the SEEK up or down arrows togo to the next or previous station and stay there.

3-2

To scan stations, press and hold the SEEK up or downarrow for two seconds until you hear a beep. The radiowill go to a station, play for a few seconds, then goon to the next station. Press either SEEK arrow again tostop scanning.

To scan preset stations, press and hold the SEEK up ordown arrow for more than four seconds. You will heartwo beeps and PSCAN will appear on the display, alongwith the highlighted preset. The radio will go to one ofthe preset stations, play for a few seconds, then go on tothe next preset station. Press either SEEK arrowagain to stop scanning presets.

The radio will only seek and scan stations with a strongsignal that are in the selected band

Setting Preset StationsUp to 30 stations, six AM, six FM1, six FM2, six XM1,and six XM2, if equipped, can be programmed using thesix screen buttons on the bottom of each band menu.To set preset stations, do the following:

1. Turn the audio system on.

2. Press the BAND hard key to select AM, FM1, FM2,XM1, or XM2, if equipped.

3. Tune to the desired station using the SEEK hardkey or the tuning knob.

4. Press and hold one of the six preset screen buttonsuntil you hear a beep. Whenever that presetscreen button is pressed, the station that was setwill return.

5. Repeat the steps for each preset and source.

3-3

Band MenuIf the radio is on while the navigation system isnot in use, this band menu will display the currentaudio information, as well as list the presets for thecurrent band.

If the radio is on while the navigation system is in use, asmaller band menu will appear, located on the leftside of the map screen. This audio screen will displaythe current audio information, such as band and station.Touch the smaller band menu screen button to accessthe band menu.

FM1 Source shown, Other Sources similar FM1 Source shown, Other Sources similar

3-4

Audio Menu

e (Audio): Press this hard key to display the audiomenu. Several adjustment options are available fromthis menu.

Tone (Bass/Midrange/Treble): Touch the plus (+) andminus (–) sign screen buttons to increase or decreasethe Bass, Midrange, or Treble. If a station is weakor noisy, decrease the treble.

Speakers (Balance/Fade): Touch the L (left) orR (right) screen buttons to adjust the balance betweenthe right and left speakers. Touch the Front or Rearscreen buttons to adjust the fade between the front andrear speakers.

Base Audio Menu

Uplevel Audio Menu

3-5

Speed Compensated Volume (SCV): If your vehicle isequipped with SCV, the audio system will adjustautomatically to make up for road and wind noise asyou drive, by increasing the volume as vehiclespeed increases. Touch the down arrow button toaccess the second page of the Audio menu. Set thevolume at the desired level, then select Low, Med,or High. The volume level should always soundthe same to you as you drive. To turn SCV off, touchthe Off screen button.

Automatic Volume Control (AVC): If your vehicle isequipped with AVC, the audio system will adjustautomatically to make up for road and wind noise asyou drive, by increasing the volume as vehiclespeed increases. Touch the down arrow button toaccess the second page of the Audio menu. Touch theOn screen button to turn this feature on. The volumelevel should always sound the same to you as you drive.To turn AVC off, touch the Off screen button.

EQ (Equalizer): While in the base Audio menu, use thescreen buttons labeled EQ1 through EQ5 to choosepreset bass, midrange, and treble equalization settings.The Custom screen button allows you to choose andset the equalization levels. To set a custom equalizationsetting, adjust each setting to the desired level, thentouch the Custom screen button until you hear a beep.

After adjustments are made, press the BAND hard keyto go back to the preset station menu. Now that youhave preset the station and the EQ setting, youcan assign the EQ to the preset station. To do this,touch the desired preset station screen button until youhear a beep. The EQ setting will now be assigned tothat preset unless you decide to change it.

If you were at the CD screen before setting an EQ andyou press the CD hard key, you will be returned tothe CD screen, and the EQ will be set to that screenuntil you change it.

Digital Signal Processing (DSP)If your vehicle is equipped with DSP, you have a choiceof four different listening experiences. DSP can beused while listening to the audio system or theCD player. Select from the following DSP settings:

Normal: Touch this screen button to adjust the audioand deliver the best possible sound quality to alloccupants.

Driver: Touch this screen button to adjust the audioand deliver the best possible sound quality to the driver’sseat occupant.

Rear: Touch this screen button to adjust the audio anddeliver the best possible sound quality to the rearseat occupants.

3-6

Spacious: Touch this screen button to make thelistening space seem larger.

See “Rear Seat Audio (RSA)”, “Theft-Deterrent Feature”,“Audio Steering Wheel Controls”, “Radio Reception”,and antenna information in the Index of your vehicle’sowner manual for more information.

Radio Data Systems (RDS)The audio system has a Radio Data System (RDS).RDS features are available for use only on FM stationsthat broadcast RDS info. With RDS, the radio cando the following:

• Display station name

• Display messages from radio stations

• Display song title and artist name

This system relies on receiving specific information fromthese stations and will only work when the informationis available. In rare cases, a radio station may broadcastincorrect information that will cause the radio featuresto work improperly. If this happens, contact theradio station.

While the radio is tuned to an RDS station, the stationname will appear on the display with the frequency.

Touch the Info screen button on the band menuto receive information the selected radio station iscurrently broadcasting.

XM™ Satellite Radio ServiceXM™ is a satellite radio service that is based inthe 48 contiguous United States. XM™ offersover 100 coast-to-coast channels including music,news, sports, talk, and children’s programming. XM™provides digital quality audio and text information,including song title and artist name. A service fee isrequired in order to receive the XM™ service. For moreinformation, contact XM™ at www.xmradio.com orcall 1-800-852-XMXM (9696).

Press the BAND hard key repeatedly until you reach theXM™ selection. When XM™ is active, the channelname and number, song title and artist will be displayedon the screen.

Touch the XM Info screen button to display additionalXM station information.

3-7

XM™ OptionsTouch the XM Options screen button to access the XMOptions menu.

This menu allows you to seek or scan for stationsbased on their category. Touch the On screen buttonnext to XM Info Timeout to hide XM™ information after acertain amount of time has passed. Touch Off to turnthis feature off.

While in this menu, turn XM Category Seek/Scan on toscroll through the categories you want to seek to.This option will take you to the first available channel inthat category.

3-8

XM™ Radio MessagesRadio Display

Message Condition Action Required

XL (Explicit LanguageChannels)

XL on the radio display,after the channel name,indicates content withexplicit language.

These channels, or any others, can be blocked at acustomer’s request, by calling 1-800-852-XMXM (9696).

XM Updating Updating encryption code The encryption code in the receiver is being updated, andno action is required. This process should take no longerthan 30 seconds.

No XM signal Loss of signal The system is functioning correctly, but the vehicle is in alocation that is blocking the XM™ signal. When you moveinto an open area, the signal should return.

Loading XM Acquiring channel audio(after 4 second delay)

The audio system is acquiring and processing audio andtext data. No action is needed. This message shoulddisappear shortly.

Channel Off Air Channel not in service This channel is not currently in service. Tune in to anotherchannel.

Channel Unavail Channel no longeravailable

This previously assigned channel is no longer assigned.Tune to another station. If this station was one of yourpresets, choose another station for that preset button.

No Artist Info Artist Name/Feature notavailable

No artist information is available at this time on thischannel. The system is working properly.

No Title Info Song/Program Title notavailable

No song title information is available at this time on thischannel. The system is working properly.

3-9

XM™ Radio Messages (cont’d)Radio Display

Message Condition Action Required

No CAT Info Category Name notavailable

No category information is available at this time on thischannel. The system is working properly.

Not Found No channel available forthe chosen category

There are no channels available for the selected category.The system is working properly.

No Information No Text/Informationalmessage available

No text or informational messages are available at thistime on this channel. The system is working properly.

XM Theftlocked Theft lock active The XM™ receiver in your vehicle may have previouslybeen in another vehicle. For security purposes, XM™receivers cannot be swapped between vehicles. If thismessage is received after having your vehicle serviced,check with your GM dealer.

XM Radio ID Radio ID label(channel 0)

If tuned to channel 0, this message will alternate with theXM™ Radio eight digit radio ID label. This label is neededto activate the service.

Unknown Radio ID not known(should only be ifhardware failure)

If this message is received when tuned to channel 0, theremay be a receiver fault. Consult with your GM dealer.

Check XM Receiver Hardware failure If this message does not clear within a short period of time,your receiver may have a fault. Consult with your GMdealer.

See “Radio Reception” and “XM™ Satellite Radio Antenna System” in the Index of your vehicle’s owner manual formore information.

3-10

Playing a CD (Single CD Player)Remove the navigation map DVD from the slot andreturn it to its case. Insert a CD partway into the slot,label side up. The player will pull it in.

There will be a 12 to 15 second delay while the CD isread, before it begins to play. When the player begins toread a CD, the Disc Check in Process message willappear briefly to remind you of the delay. When themap DVD is reinserted and read, the DVD Checkin Process message will appear briefly to remind you ofthe delay.

If the ignition or radio is turned off with a CD in theplayer, it will stay in the player. When the ignitionor radio is turned on, the CD will start playing where itstopped, if it was the last selected audio source.

If playing a CD-R the sound quality may be reduceddue to CD-R quality, the method of recording, the qualityof the music that has been recorded, and the way theCD-R has been handled. There may be an increasein skipping, difficulty in finding tracks, and/or difficulty inloading and ejecting. If these problems occur, checkthe bottom surface of the CD. If the surface of the CD isdamaged, such as cracked, broken, or scratched, theCD will not play properly. If the surface of the CDis soiled, see “Care of Your CDs” in the Index of yourvehicle’s owner manual.

If there is no apparent damage, try a known good CD.

Notice: If you add any label to a CD, insert morethan one CD into the slot at a time, or attemptto play scratched or damaged CDs, you coulddamage the CD player. When using the CD player,use only CDs in good condition without anylabel, load one CD at a time, and keep the CD playerand the loading slot free of foreign materials,liquids, and debris.

Do not add any label to a CD, it could get caught in theCD player. If a CD is recorded on a personal computerand a description label is needed, try labeling the top ofthe recorded CD with a soft marker instead.

If an error appears on the display, see “CD Messages”later in this section.

While playing a CD in the CD player, the navigationsystem is not available. A message will display ifthe NAV key is pressed. If your vehicle is equipped withRear Seat Entertainment (RSE), you can play anaudio CD while using the navigation system. See RearSeat Entertainment System on page 3-15 for moreinformation.

3-11

B (CD): Press this hard key to play a CD whenlistening to the radio. The CD screen will be displayed.

Y (Eject): Press this hard key to eject a CD.

Random: Touch this screen button to play the tracks inrandom, rather than sequential, order. Touch it againto turn off random play.

Repeat: Touch this screen button to repeat the trackthat is currently playing. Touch it again to turn offrepeat play.

[ (Forward): Touch this screen button to advancequickly within a track. As the CD advances, elapsed timewill display to help you find the correct passage.Release this screen button to play the passage.

r (Reverse): Touch this screen button to reversequickly within a track. As the CD reverses, elapsed timewill display to help you find the correct passage.Release this screen button to play the passage.

u (Track Forward): Touch this screen button toadvance to the next track on the CD.

t (Track Reverse): Touch this screen button toreturn to the previous track on the CD.

w SEEK x: Press and release the SEEK up arrow toadvance to the next track, or the down arrow to returnto the previous track. If more than two seconds ofthe song has played, pressing the SEEK down arrowwill return you to the beginning of the current track.

Track Scan: Press and hold one of the SEEK arrowsfor two seconds or more to enter CD TRACK SCANmode. A chime will sound. The first 10 seconds of eachtrack will play. Press one of the SEEK arrows againto stop scanning.

BAND: Press the BAND hard key to listen to the radiowhen a CD is playing.

3-12

Playing a CD (Six-Disc CD Changer)Your vehicle may have a six-disc CD changer.See “Radio with Six-Disc CD” in the Index of yourvehicles owner manual for more information.

There will be a 12 to 15 second delay while the CD isread, before it begins to play. When the player begins toread a CD, the Disc Check in Progress message willappear briefly to remind you of the delay.

If the ignition or radio is turned off with a CD in theplayer, it will stay in the player. When the ignitionor radio is turned on, the CD will start playing where itstopped, if it was the last selected audio source.

If playing a CD-R the sound quality may be reduceddue to CD-R quality, the method of recording, the qualityof the music that has been recorded, and the way theCD-R has been handled. There may be an increasein skipping, difficulty in finding tracks, and/or difficulty inloading and ejecting. If these problems occur, checkthe bottom surface of the CD. If the surface of the CD isdamaged, such as cracked, broken, or scratched, theCD will not play properly. If the surface of the CDis soiled, see “Care of Your CDs” in the Index of yourvehicle’s owner manual.

If there is no apparent damage, try a known good CD.

Notice: If you add any label to a CD, insert morethan one CD into the slot at a time, or attemptto play scratched or damaged CDs, you coulddamage the CD player. When using the CD player,use only CDs in good condition without anylabel, load one CD at a time, and keep the CD playerand the loading slot free of foreign materials,liquids, and debris.

Do not add any label to a CD, it could get caught in theCD player. If a CD is recorded on a personal computerand a description label is needed, try labeling the top ofthe recorded CD with a soft marker instead.

If an error appears on the display, see “CD Messages”later in this section.

While playing a CD in the CD player, the navigationsystem is not available. A message will display ifthe NAV key is pressed. If your vehicle is equipped withRear Seat Entertainment (RSE), you can play anaudio CD while using the navigation system. See RearSeat Entertainment System on page 3-15 for moreinformation.

3-13

Random: Touch the Random screen button for lessthan two seconds to play the tracks on the current CD inrandom, rather than sequential, order. Touch Randomagain to turn off random play.

Touch the Random screen button for more thantwo seconds to play the tracks on all of the CDs loadedin random, rather than sequential, order. D. Randomwill appear on the display. Touch Random again to turnoff random play.

Repeat: Touch the Repeat screen button to repeat thetrack that is currently playing. Touch it again to turnoff repeat play.

[ (Forward): Touch and hold the forward arrowscreen button to advance quickly within a track. As theCD advances, elapsed time will display to help youfind the correct passage.

r (Reverse): Touch and hold the reverse arrowscreen button to reverse quickly within a track. As theCD reverses, elapsed time will display to help youfind the correct passage.

Disc r: Touch this screen button to advance to thenext CD in the changer.

q Disc: Touch this screen button to return to theprevious CD in the changer.

w SEEK x: Press and release the SEEK up arrow toadvance to the next track, or the down arrow to returnto the previous track. If more than two seconds ofthe song has played, pressing the SEEK down arrowwill return you to the beginning of the current track.

Track Scan: Press and hold one of the SEEK arrowsfor two seconds to enter CD TRACK SCAN mode.A chime will sound. The first 10 seconds of each trackwill play. Press one of the SEEK arrows again tostop scanning.

Disc Scan: Press and hold on of the SEEK arrows forfour seconds to enter DISC SCAN mode. A doublechime will sound. The first 10 seconds of the first trackon each CD will be play. Press one of the SEEKarrows again to stop scanning.

BAND: Press this hard key to listen to the radio when aCD is playing.

3-14

CD Messages

CD ERROR: If this message appears on the screen,the CD is not being read by the system. The CD couldbe dirty, scratched, wet, or upside down. You mayalso be driving on a very rough road. When the roadbecomes smoother, the CD should play.

NO MUSIC DISC: If this message appears on thescreen, the map DVD is still inserted in the system.Press eject and return the map DVD to its case, theninsert a CD. The CD should play.

NO DISC: If this message appears on the screen, theCD slot is empty. Insert a CD. The CD should play.

If a CD is not playing correctly for any other reason, trya known good CD. If any error occurs repeatedly orif an error cannot be corrected, contact your GM dealer.If your radio displays an error message, write it downand provide it to your GM dealer when reportingthe problem.

See “Rear Seat Audio (RSA)”, “Care of Your CDs andDVDs”, and “Care of Your CD and DVD Player” inthe Index of your vehicle’s owner manual for moreinformation.

Rear Seat Entertainment System

Your vehicle may have a DVD Rear SeatEntertainment (RSE) system. While playing a DVD oraudio CD in the RSE, press the CD key to view the RSEscreen and to switch to DVD as your main audiosource. At this point, you will hear what is being playedin the RSE system through all of the vehicle’sspeakers. From the RSE screen you can mute the Frontor Rear speakers, mute RSE entirely, or turn off RSE.

When the RSE system is turned off, you must turnit back on from the RSE system. It cannot be turnedback on through the navigation system radio.

3-15

RSE Messages

CD ERROR: If this message appears on the navigationscreen, the DVD or CD is not being read by thesystem. The DVD or CD could be dirty, scratched, wet,or upside down. You may also be driving on a veryrough road. When the road becomes smoother, the DVDor CD should play.

RSE ERROR: If this message appears on thenavigation screen, the RSE system is not workingproperly. See “DVD Messages” under “Rear SeatEntertainment System” in the Index of your vehicle’sowner manual for more information.

NO DISC: If this message appears on the navigationscreen, the DVD slot is empty. Insert a DVD or CD.The DVD or CD should play.

See “Rear Seat Entertainment System”, “Rear SeatAudio (RSA)”, “DVD Distortion”, “Care of Your CDs andDVDs”, “Care of Your CD and DVD Player”, “CleaningYour DVD Player”, and “Cleaning the Video Screen”in the Index of your vehicle’s owner manual formore information.

3-16

AAddress ......................................................... 2-20Alpha-Numeric Keypad ...................................... 2-3Audio Menu ..................................................... 3-5Audio System .................................................. 3-2

BBand Menu ...................................................... 3-4Beep ............................................................. 2-33

CCanadian Owners ................................................ iiCanceling Guidance ........................................ 1-10CD Messages ................................................ 3-15Cleaning the Video Screen ............................... 1-10Clock ............................................................ 2-34Colors on the Screen ...................................... 2-31Contrast/Brightness ......................................... 2-32

DDatabase Coverage Explanations ...................... 2-37Destination ..................................................... 2-18Destination Preview Menu ................................ 2-27Display Off ..................................................... 2-35DVD

Rear Seat Entertainment System ................... 3-15

EEdit Route ..................................................... 2-11Emergency .................................................... 2-24Entering an Address, Point of Interest, Home,

and Preset Destinations ................................. 1-6

FFinding a Station .............................................. 3-2Freeway Entrance/Exit ..................................... 2-26

1

GGetting Started, Navigation ................................ 1-4Global Positioning System (GPS) ...................... 2-35

HHard Keys ....................................................... 2-2

IInstalling the Map DVD ..................................... 2-5Intersection .................................................... 2-25

LLanguage ...................................................... 2-33

MMap .............................................................. 2-24Map Adjustments and Scales ............................. 2-6Map Appearance .............................................. 2-9Maps .............................................................. 2-5Memory Points ....................................... 2-16, 2-23Menu

Navigation .................................................... 2-8

NNavigation

Getting Started ............................................. 1-4Menu .......................................................... 2-8System Overview .......................................... 1-2Using the System .......................................... 2-2

Navigation Options .......................................... 2-29Navigation Setup ............................................ 2-14

2

OOrdering

Map DVDs ................................................. 2-37Overview, Navigation System ............................. 1-2Owners, Canadian ............................................... ii

PPhone Number ............................................... 2-25Playing a CD (Single CD Player) ...................... 3-11Playing a CD (Six-Disc CD Changer) ................. 3-13Playing the Radio ............................................. 3-2Point of Interest (POI) ..................................... 2-22Preset Destinations ......................................... 2-20Previous Destination ........................................ 2-23Previous Start Point ........................................ 2-24Problems with Route Guidance ......................... 2-37

RRadio ............................................................. 3-2Radio Data Systems (RDS) ................................ 3-7Rear Seat Entertainment System ....................... 3-15Route Overview ................................................ 2-9Route Overview Menu ..................................... 2-28Route Preview ................................................ 2-12

SScreen Color .................................................. 2-32Setting Preset Stations ...................................... 3-3Setting Radio Station Presets ............................. 1-5Setting the Time ............................................... 1-6Suspend Guidance ........................................... 2-9Symbols .......................................................... 2-6System Needs Service, If ................................. 2-37

3

TTouch-Sensitive Screen Buttons .......................... 2-4

UUsing Your Home or Preset Destinations .............. 1-9

VVehicle Chime ................................................ 2-33Vehicle Positioning .......................................... 2-36Video Screen, Cleaning ................................... 1-10Voice Volume ................................................. 2-10

XXM™ Options .................................................. 3-8XM™ Satellite Radio Service .............................. 3-7

4

2006 GMC Yukon, Yukon XL,Yukon Denali, Yukon XL Denali … · 2020-06-06 · The navigation system...

Documents

Transcript of 2006 GMC Yukon, Yukon XL,Yukon Denali, Yukon XL Denali … · 2020-06-06 · The navigation system...