Business Network Solutions for Dynamic Computing Services ... · Inbetriebnahme Service Connection...

Inbetri ebnahm e Servi ce Conne ction BNS zu DCS Rem ote A cce ss Servi ce (RAS ).docx 13. 07. 2016 C1 - Publi c TAAMI PA2 Swi sscom (S chweiz ) AG PMK-SME-PDC-OP Miller Patrice Müllerstr asse 16 8004 Zürich

+41-58-224 62 52 +41-79-614 12 09 Patri ce.Mil ler@swi sscom.com Miller Patrice, PMK-SM E-PDC-OP Herr Bedienungsanleitung

C1 - Public

Swisscom (Schweiz) AG Inbetriebnahme Service Connection BNS zu

DCS

0/14

PMK-SME-PDC-OP

Miller Patrice

13.07.2016

Rem

ote

Acc

ess

Ser

vice

(R

AS)

.do

cx

Business Network Solutions for Dynamic Computing Services Connection

Commissioning

Swisscom (Switzerland) Ltd BNS to DCS/DCS+ Connection 1/14

Contents

1 Preparation ............................................................................................................................................................................. 2

2 DCS Commissioning ............................................................................................................................................................. 3

2.1 Cloud Part – DCS Portal ............................................................................................................................................... 3

2.2 BNS Part – BNS Dashboard ......................................................................................................................................... 5

2.3 Cloud Bonus Part – vCloud Director ......................................................................................................................... 6

3 DCS+ Commissioning ......................................................................................................................................................... 10

3.1 Cloud Part – DCS Portal ............................................................................................................................................. 10

3.2 BNS Part – BNS Dashboard ....................................................................................................................................... 14

3.3 Cloud Bonus Part – vCloud Director ....................................................................................................................... 14


1 Preparation

The following data should be prepared before starting either of the onboarding processes (DCS/DCS+),

to ensure everything runs smoothly. The CP-ID/Key can only be found once the onboarding process has

been started (see chapter 2.2/3.2).

➢ Connection Point Name (EON name)

➢ Network Address (Network address for your EON)

➢ Gateway IP Address (IP for the virtual gateway connected to the EON -> auto-gen rec*)

➢ IP Address Router 1 (auto-gen rec)

➢ IP Address Router 2 (auto-gen rec)

➢ Pool Start IP Address (IP pool for the EON -> auto-gen rec)

➢ Pool End IP Address (IP pool for the EON -> auto-gen rec)

➢ DNS Server 1/2 (optional -> swisscom rec)

➢ DNS Domain (for VM's connected to the EON -> optional)

➢ "Shared" Yes to share the EON in all your Dynamic Data Centers

Connection Point ID/Key (to be used in the BNS dashboard to connect the EON)

ATTENTION:

➔ The desired subnet may not be in use at any other customer location.

➔ The desired subnet must be in the private network range (RFC 1918). If this requirement is

ignored, the packets will not be routed between BNS and DCS.

➔ The connection point cannot be adjusted after it has been created.

*auto-gen rec = auto-generated recommendation from Swisscom

BNS Customer

192.168.100.0/24

192.168.100.1

192.168.100.2

192.168.100.3

192.168.100.100

192.168.100.200

16

193.5.23.1 / 193.247.204.1

16

16

16


2 DCS Commissioning

The first step for ensuring a successful configuration must take place on the DCS side. Using the data

from Chapter 1, a virtual EON (external organizational network) must be configured, which can be

seen on the DCS and should be connected to the BNS router.

2.1 Cloud Part – DCS Portal

Log in to the enterprise extranet using your personal extranet login.

(extranet.swisscom.ch / datacenter.swisscomcloud.com)

Click on the eService "Dynamic Computing" within the DCS portal. The 2-factor authentication is

started.

In the next step, you select the data center via the DCS portal, which is to be connected to BNS. Click

the network symbol of the respective DDC.


Add a "Connection Point" under "Swisscom Cloud Services Connectivity".

Fill in the fields "Connection Point Name" and "Network Address" on the screen that appears. If

required, the automatically generated details can be adjusted (e.g. Pool IP Range / DNS / Shared).

Now click on "Submit Order".

In a few minutes, you will receive an e-mail confirming the successful creation of the EON. After the

order has been completed successfully, the CP-ID will be visible on the DCS portal under "Swisscom

Cloud Services Connectivity" in the Connectivity area of the respective data center under "Info".

The remaining configuration settings will now be entered via the BNS dashboard.


2.2 BNS Part – BNS Dashboard

Log in to the BNS Dashboard via the Partner Extranet. In the BNS Dashboard under the menu point

"Groups", open the menu "Service Connections". IN the drop-down menu choose the stack (DCS or

DCS+). Enter the DCS CP-ID retrieved in 2.1. Attention: For DCS+ the Connection Point Key must be

entered. Inform the customer about the terms and conditions and click the checkbox. Open the

shopping cart and submit the order. The connection should be established within a short period of

time (approx. 15 minutes).


2.3 Cloud Bonus Part – vCloud Director

In the next to last step, you will log on to the extranet again and switch to the DCS portal (see chapter

2.1). This time, however, you go one step further and open the vCloud Director by clicking the server

icon of the respective Data Center.

From the start page, switch to the vApp that has been prepared for this example, for which a VM has

already been commissioned and which is to be connected to BNS (the server must be stopped to

complete the configuration).


Right-click the VM and then select "Properties".


In the "Hardware" menu under "Network adapter", select "Add network..." via the drop-down menu.

On the next screen, select "VDC organization network" and then click "Continue".

Now select the correct BNS network and select "Finish".


Now click "OK" to attach the network. The server can now be started and the configuration tested.


3 DCS+ Commissioning

The first step for ensuring a successful configuration must take place on the DCS side. Using the data

from Chapter 1, a virtual EON (external organizational network) must be configured, which can be

seen on the DCS and should be connected to the BNS router.

3.1 Cloud Part – DCS Portal

First, log in to the ENT extranet using your personal extranet login.

(extranet.swisscom.ch / datacenter.swisscomcloud.com)

Click on the eService "Dynamic Computing+" within the DCS portal.

→ The 2-factor authentication is started.


In the next step, you select the data center via the DCS portal, which is to be connected to BNS. Click

on the respective DDC.

Now click on Actions and "Create Connection Point".


Enter a name for your Connection Point and click on "Next"

Enter the Network Settings you prepared on chapter 1 beforehand (Options like the Pool Start-, and End IP

are changeable). Click "Next".


Click "Submit"

After the order has been completed successfully, you can get the Connection Point Key in the DCS portal.

Click on the Datacenter from where you ordered the Connection Point. Then select "Connection Point"

from the dropdown menu. And after that click on the Connection Point.


You can copy the Connection Point Key to the second page in this document. Then head on to the next

chapter.

3.2 BNS Part – BNS Dashboard

Follow the same steps as in chapter 2.2.

3.3 Cloud Bonus Part – vCloud Director

Log in to the extranet and switch to the DCS+ portal (see chapter 3.1). This time, however, you go one

step further and open the vCloud Director by clicking on the vCD Icon on the top right corner.

Then follow the steps from point 2.3 after the first image.

Business Network Solutions for Dynamic Computing Services ... · Inbetriebnahme Service Connection...

Documents

Transcript of Business Network Solutions for Dynamic Computing Services ... · Inbetriebnahme Service Connection...