FLÜSSIGGLAS-VERSIEGELUNG FÜR HAUSHALT UND AUTO … · on upholstery, mattresses, suits, car...

WWW.LIQUI-GLAS.COM

FLÜSSIGGLAS-VERSIEGELUNG FÜR HAUSHALT UND AUTO

LIQUID GLASS TREATMENTS FOR HOUSEHOLD AND CAR

WWW.LIQUI-GLAS.COM

GLASS / CERAMICSPROTECTION

Ideal for coating ….Windows - bath tubs - shower screens,

mirrors - tiles - windscreens, wash basins etc.

Contents:125 ml pre-cleaner

50ml treatment5 dry wipes

How LIQUIGLAS® works. Under a microscope most surfaces are very rough and look like mountain ranges. Dirt and bacteria nor-mally cling to these surfaces. Traditional cleaners, which are often environmentally damaging, fail to fully remove the dirt or they apply a coating on top of the dirt which makes the surface look clean. LIQUIGLAS® coats these “mountains” with pure, nano scale particle free glass, which is 500 times thinner than a human hair. The newly coated surface is super-phobic and so rejects soiling agents. Amaz-ingly this coating is breathable, fl exible yet super durable. The coating is environmentally friendly as it is created from quartz sand. Additionally the coatings can be cleaned with water which reduces the use of harmful chemicals.Your cleaning costs are also reduced!

Suitable for application on:Glass and ceramic surfaces, ideal for use on wash basins, shower screens, windscreens, windows, skylights, conservatories, balcony doors, shop windows, glass cabinets, glass facades, mirrors and much more.

Application:1. Initially clean the surface to remove any heavy soiling such as fats and soap residues. Rinse or wipe down the surface with clean water and then dry the surface.Spray LIQUIGLAS® pre cleaner on the surface and thoroughly clean the area with a clean cloth or tissue. (It is advisable to wear gloves as a fingerprint can be 100 times thicker than the coating.) The surface is now residue-free and the prepared for the application of LIQUIGLAS® pre cleaner.2. Spray LIQUIGLAS® Glass & Ceramic on the clean surface or onto a suitable low absor-bency wipe and ensure full coverage by wiping the liquid over the whole surface. (3ml per m² is an approximate coverage rate) After 2 minutes finish the application by gently buffing the surface for a few seconds. The surface is now coated with a dirt-repelling and UV-stable protection.Warning: Flammable. Keep out of reach of children. Keep away from sources of ignition - No smoking. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label.

Product features: Easy to use Dirt-repelling Hydrophobic (repels water) Environmentally neutral No negative impact on visual appearance Long-lasting Anti-microbial Economical Multi award winning technology (including internationally

recognized environmental award)

Made in Germany

CCM GmbH Creative Chemical ManufacturersDiepenbroich 8 · D-51491 OverathFon +49 (0) 2206 / 938590-0 · Fax +49 (0) 2206 / [email protected] · www.quantumliquiglas.com

ADVANCED LIQUID GLAS TECH

NOLO

GY

A.L.G.T.®

WWW.LIQUI-GLAS.COMWWW.LIQUI-GLAS.COM

GLASS / CERAMICSGLASS / CERAMICSPROTECTIONPROTECTION

Ideal for coating ….Ideal for coating ….Windows - bath tubs - shower screens,Windows - bath tubs - shower screens,

mirrors - tiles - windscreens, wash basins etc.mirrors - tiles - windscreens, wash basins etc.

Contents:Contents:125 ml pre-cleaner125 ml pre-cleaner

50ml treatment50ml treatment5 dry wipes5 dry wipes

www.LIQUI-GLAS.COM

welcome to the world of SiO2 Liquid Glass, nano layering technology. The product which you have before you offers truly stunning characteristics. Frequently asked questions: So what does Nano mean?A nanometer is a unit of measurement.1nm (nanometer) is one billionth of a metre.The name “Nano” comes from the Greek “Nanos” which means dwarf. Does our liquid glass contain any potentially harmful “nano” particles? No. Our coatings are recognised as being particle free. Our technology is based on molecular SiO2, which is created via an adaptation of the Sol-Gel process. why can´t you see our treatment? Our thinnest coatings are approximately 100nm thick. This means that they are approximately 500 times thinner than the a human hair and you need to use an electron microscope to see the coatings. So what exactly does the product contain? This truly amazing product contains pure, particle free, SiO2 (Silicon Dioxide) which means that it contains “pure glass”. The glass is in a molecular form and is held in a liquid; it does not become “glass” until it is allowed to dry. The glass in windows is not pure! So how does the nano coating work and what are the benefits? The liquid glass coating is a highly durable, flexible, super smooth, breathable and Super Phobic coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated surface. Most significantly, almost all treated surfaces can be cleaned with water alone. This means that in most instances environmentally damaging cleaning chemicals are not needed. When is the surface sufficiently coated? After applying the coating to the surface ensure that the whole of the surface is coated by working across the area. work quickly and in in a methodical manner. Over application results in a visble deposit which can be buffed off.

How do I clean brushed stainless steel? Brushed stainless steel is often used for oven hoods, oven hobs and microwaves. During the manufacturing process a thin oily deposit is often left in place. Thorough cleaning is required in order to remove this coating. A micro-fibre cloth and a suitable detergent can be used prior to deep cleaning with the LIQUIGLAS® cleaning wipe.

Does the coating prevent the appearance of finger prints? The LIQUIGLAS® coatings will not prevent finger prints from appearing on a surface but the finger prints are easily removed with a micro-fibre and warm water.

Do I need to wipe the surface with a dry cloth after cleaning? To attain an “as good as new” appearance it is advisable wipe the surface with a dry cloth as this will remove water marks.

Should I use a scourer to clean coated surfaces? Scouring agents and scouring pads will remove the coating.

Should I use warm water or cold water to clean the surface? Cold water can be used but warm water will enhance the removal of fats and cooking deposits. It is advisable to let the water soften baked on cooking deposits before cleaning the surface.

Is the coating suitable for all aluminium and stainless steel? It is important to note that occasionally aluminium is coated with a lacquer and so bonding to such surfaces may be less efficient (the LIQUIGLAS® Plastic, art. no. 447 should be used for these surfaces). Some stainless steel is highly polished. Optimal bonding to such surfaces can also be difficult to attain.

StainleSS Steel / aluminium Protection

Suitable for coating stainless steel and aluminium in most environments.

Are surfaces coated with LIQUIGLAS® self cleaning? No, we offer“easy clean” technology. LIQUIGLAS® has non-stick characteristics; similar to pans which are coated with non stick coatings. How long will the protection last? Every environment is different as some living spaces encounter heavy usage whilst others encoun-ter far less “wear and tear.” The treatments are all very durable and they will last for many months or even years. we expect the hard surface coatings to last for at least 6 months in domestic environments. The beading effect has disappeared or become weaker - why? Either the coating has worn away after prolonged use or the surface needs to be cleaned in order to re expose the surface. wiping with pre cleaner or an alcohol cleaner will also rejuvenate the coating. Can the treatments be re applied? Re application follows the format used during the initial application process; simply make sure that the surface is completely clean , dry and free of contaminants such as washing powder residue, or detergents. Please read the section relating to “application”. Are the LIQUIGLAS® coatings “food safe”? All of our coatings have been tested by independent agencies and are food safe. Are the LIQUIGLAS® coatings Dermatologically tested? All of our products are subjected to dermatological testing. Are the LIQUIGLAS® coatings heat tolerant? Liquid glass is stable between -150°C and +450°C. Can I apply LIQUIGLAS® to any surface? Liquid Glass bonds to most surfaces via quantum forces. The coatings can’t be applied to oily woods, hybrid stone mixtures or non stick surfaces. There are no glues, resins or other chemicals within this product.

Are LIQUIGLAS® products environmentally friendly? Our technology is recognised as being of great significance in the battle to protect our planet. The technology has won several awards from leading “environmental” agencies. It should be remembered that in most instances treated surfaces can be cleaned with water alone this means that a vast amount of POPs (Persistent Organic Pollutants) such as detergents can be withdrawn from sale.

Please share your experience with the team at LIQUIGLAS®. If you have tested a new application and found it good, we may publish it on our website. we will be pleased to forward a sample items of a new QLG coating to any person who has their comments published on our web page. For more information, visit www.liqui-glas.comcontents:

3 pre-cleaning wipes 100 x 140mm3 treatment wipes 100 x 140mm (2 m² per wipe)

TEXTILE & LEATHER

PROTECTION

WWW.LIQUI-GLAS.COM

LIQUIGLAS®

Textile and Leather treatment protects fabrics, suede and leather* with and undetectable layer of nano scale, particle free glass. The coating which is approximately 500 times thinner than a human hair is flexible, breathable highly durable and anti microbial. It protects against dust, oil, grease, water and liquids such as tea and coffee.(*Some leathers and suede are protected with special oils or coating, as a result bonding of the Quantum LiquiGlas® may be impaired. In all instances staining agents must be removed from suede and leather within 2-3 minutes. ) LIQUIGLAS® Textile and Leather is ideal for use on upholstery, mattresses, suits, car seats, ties, outdoor wear, work wear etc.Application: To achieve a long lasting effect all surfaces must be completely clean, stable and free of any coatings such as conditioners or silicones. Firstly test for colour fastness on an area that will be hidden from view.To apply LIQUIGLAS® Textile and Leather spray the surface from a distance of approximately 25cms. Ensure that the fabric is evenly and fully moistened but not “soaking wet”. (2-3 spraying passes, “wet on wet”, is usually sufficient for a medium thickness fabric such as a tie or blouse. Thicker fabrics normally require further spraying passes.) Disperse any over-application of the liquid by wiping the surface with a gloved hand. The coating becomes fully functional after 24hrs. Warm air drying can be used. The coating can be ironed using a low temperature setting. Clean with warm water max 60°C. Sponging or soak washing is advised. Coverage: For up to 10 m², depending on the density and surface area of the fabric. Keep out of reach of children. Do not spray into the eyes, do not drink. If swallowed, seek medical

advice immediately

and show this container and label.

Do not inhale atomized spray. Irrigate with water

if splashed into the eyes. Seek medical guidance if any conditions

persist. Use the contents of the bottle within 6 months of opening. Protect the

bottled liquid from frost. How LIQUIGLAS® works. Under a microscope most surfaces are very rough and look like mountain ranges. Dirt and bacteria normally cling to these surfaces. Traditional cleaners, which are often environmentally damaging, fail to fully remove the dirt or they apply a coating on top of the dirt which makes the surface look clean. LIQUIGLAS® coats these “mountains” with pure, nano scale particle free glass, which is 500 times thinner than a human hair. The newly coated surface is super-phobic and so rejects soiling agents. Amazingly this coating is breath-able, flexible yet super durable. The coating is environmentally friendly as it is created from quartz sand. Additionally the coatings can be cleaned with water which reduces the use of harmful chemicals. Your cleaning costs are also reduced!

easy application dirt and moisture

repellant food safe environmentally neutral breathable and flexible physiologically neutral highly durable undetectable temperature resistant reduces use of cleaning

chemicals Quality tested by leading

German research organisations

multi award winning technology

Made in Germany

ADVAN

CED

LIQUID GLAS TECHNOLOGY

A.L.G.T.®

WOOD PROTECTION

WWW.LIQUI-GLAS.COM

LIQUIGLAS®

Wood For protecting natural wood against moisture, mould, soiling abrasion, and bacteria. Ideal for use on Saunas, doors, art works, garden furniture, tables, toys and much more. LIQUIGLAS® Wood is a water based coating which provides an undetectable, flexible and breathable glass coating which can be applied in seconds to clean stable wooden surfaces. It can be applied to moist wood but it is not suitable for oily wood such as teak.

Application: Spray LIQUIGLAS® Wood on to the surface from a distance of approximately 25cm. To achieve optimal preservation of wood, conduct 2-3 spraying passes (wet on wet). Ensure that the whole surface is fully moistened. The coated item can be handled when the surface is dry. Full curing takes approximately 24hrs at an ambient temperature of 20°C.

NOTE: Please note that some wood will continue to dry and or swell even after the application of the coating. The manufacturer accepts no liability for any deformation or adverse performance characteristics of the coated wood. The coating is heat tolerant (tolerant to temperatures in the rage -150 to +450°C) but it is important to note that the underlying wood may react to hot items which are placed on the surface.

Keep out of reach of children. Do not spray into eyes. Do not drink. If swallowed, seek medical advice immediately and show this container and label. Do not inhale atomized spray. Please use content within 6 months of opening.

Coverage: Up to 10m², depending onthe surface area and absorbency of the wood.

How LIQUI-GLAS® works.

Under a microscope most surfaces are very rough and

look like mountain ranges. Dirt and bacteria normally cling to these

surfaces. Traditional cleaners, which are often environmentally damaging, fail to fully

remove the dirt or they apply a coating on top of the dirt which makes the surface look clean.

LIQUIGLAS® coats these “mountains” with pure, nano scale particle free glass, which is 500 times thinner than a human hair. The newly coated surface is super-phobic and so rejects soiling agents. Amazingly

this coating is breathable, flexible yet super durable. The coating is environmentally friendly as it is created from quartz sand. Additionally the coatings can be cleaned with water which reduces the use of harmful chemicals.Your clean-ing costs are also reduced!

weatherproof easy application Hydrophobic (water

repellent) dirt and moisture

repellant food safe environmentally neutral breathable and flexible physiologically neutral highly durable undetectable reduces use of cleaning



multi award winning technology Made in Germany

ADVAN

CED


A.L.G.T.®

LIQUIGLAS®

Shoe can be used to protect leather, suede and fabric footwear.By applying LIQUIGLAS®

Shoe on to the surface of your footwear you will be protecting the surface with a undetectable, super durable, stain repelling layer of pure nano scale glass. Ideal for use on training shoes, fabric basket ball shoes, suede shoes, non coated/polished leather, handbags etc. The multi award winning technology is easy to apply. Firstly ensure that the surface is completely clean as the coating will not adhere to any form of dirt, or grease. The coating can be applied to moist fabrics. Spray the coating on to the surface from a distance of approximately 25cm ensuring that the surface is fully coated and moistened. Two spraying passes is normally sufficient. Wipe over the surface with a gloved hand, if over application causes pooling on the surface. This action will disperse the liquid. The coating becomes fully bonded after drying for 24hrs at room temperature. Warm air drying can be used. Cleaning: Coated items should be cleaned

SHOEPROTECTION

WWW.LIQUI-GLAS.COM

Die LiquiGlas® Beschichtungstechnologie, die wir Ihnen hier vorstellen, ist eine wirklich außergewöhnliche Technologie – High Tech Made in Germany. Zur Vermarktung hat die CCM GmbH ein einzigartiges Netzwerk geschaffen, zusammen mit der LiquiGlas Ltd. aus England im Bereich Vertrieb und Marketing und einigen der führenden deutschen Forschungs- und Entwicklungsunternehmen im Bereich der Entwicklung und Herstellung von „Flüssigglas“, das offi ziell „Beschichtungstechnologie mit ultradünnen SiO²-Schichten“ heißt. Diese wirklich bemerkenswerte und vielseitige SiO² Technologie hat bereits viele Preise gewonnen aber das wichtigste ist, das es dem Anwender in der Industrie und im privaten Bereich die Möglichkeit gibt, nahezu alle Oberfl ächen mit einer lang anhaltenden, partikelfreien, unsichtbaren und einfach zu reinigenden („easy to clean“) Glasschicht zu schützen, die 500 Mal dünner ist als ein menschliches Haar.

Die Glasmoleküle (Siliziumdioxid / SiO²) entstehen aus reinem Quarzsand, von dem es in der Natur noch gewaltige Vorkommen gibt. Siliziumdioxid ist sogar einer der weltweit in der Natur am häufi gsten vorkommenden Rohstoffe. Wie bei haushaltsüblichem Glas sind auch unsere Beschichtungen chemisch inert und sehr widerstandsfähig gegen Säuren, Laugen und Lösungsmittel. Aber trotz der Ähnlichkeit zu üblichem Glas sind die LiquiGlas® Beschichtungen doch erstaunlich unterschiedlich. Die Beschichtung ist fl exibel, atmungsaktiv, lang anhaltend, hitzebeständig, anti-mikrobiell, hat Anti-Haft-Eigenschaften und ist leicht zu reinigen. Dabei ist die Anwendung der LiquiGlas® Produkte denkbar einfach. Nach einer sehr guten Vorreinigung können Gegenstände wie z. B. Waschbecken, Windschutzscheiben und Textilien in Sekunden beschichtet werden. Besonders hervorzuheben ist, dass die meisten beschichteten Oberfl ächen nur noch mit klarem Wasser gereinigt werden brauchen, was den Gebrauch von chemischen Reinigungsmitteln erheblich reduziert und somit die Umwelt in großem Umfang schont. Wir beschäftigen uns mit der Entwicklung und Vermarktung der Flüssigglas-Technologie bereits seit 2003 und in der Folge dessen bieten wir eine große Erfahrung in Abfüllung, Marketing und weltweiter Vermarktung an.

LiquiGlas® - Schützt unsere Welt. / LiquiGlas® – Protecting our world.

ÜBER UNS / ABOUT US

LiquiGlas® is an exceptional technology which is brought to you by a unique partnership between LiquiGlas Ltd of the UK and CCM GmbH of Germany. Together we are working with some of Germany’s leading R+D companies; these partner organisations specialise in the creation of “Ultra Thin SiO² Layering Technology” which is better known as Liquid Glass. SiO² technology, in its various forms, has won numerous awards but most signifi cantly it allows the end user to protect both industrial and domestic surfaces with a super durable coating of invisible, easy to clean, glass.

In essence the technology allows the end user to deposit a nano scale layer of molecular, particle free glass, onto the surface of most items. The molecules of glass (silicon dioxide/SiO²) come from pure quartz sand, of which there are vast reserves, as silicon dioxide is one of the most abundant compounds on the planet. Just like domestic glass the coatings are chemically inert and highly resistant to acids. The coatings also offer resistance to alkalis and solvents; however, despite some similarities to standard glass the LiquiGlas® coatings are stunningly different. The layer is fl exible, breathable, highly durable, heat tolerant, anti-microbial and offers non stick and “easy clean” characteristics. The application of the LiquiGlas® range of products is amazingly straight forward. After preparatory cleaning, items such as wash basins, windscreens, and fabrics can be coated in a matter of seconds. Signifi cantly most coated surfaces can be cleaned with water alone, this of course massively reduces the use of environmentally damaging cleaning products.

CCM has been involved with the development and marketing of Liquid Glass technology for over 8 years and as a result we offer unrivalled experience in the supply, packaging and world-wide distribution of this technology.

think green

2

FLÜSSIGGLAS-TECHNOLOGIE / LIQUID GLASS TECHNOLOGY

Alles begann 1845 in Paris, als J.J. Ebelmen, ein französischer Wissenschaftler, als erster den „Sol-Gel-Prozess“ entdeckte, der einfach ausgedrückt besagte, dass man „durch Manipulation einer Flüssigkeit, die Kieselsäure enthält, Glas erschaffen konnte“. Dies war eine wirklich interessante Entdeckung, zu dieser Zeit aber sehr theoretisch und das einzige, was in der Praxis am Ende übrig blieb, waren „Klumpen aus Glas“. Der nächste wichtige Entwicklungs- schritt kam 1939, als die deutsche Firma Schott Glaswerke begann, die Technologie weiter zu entwickeln. Nach 20 Jahren weiterer For- schung konnten dann die ersten Gegenstände mit SiO2 beschichtet werden. Dieser Prozess war aber immer noch sehr komplexund teuer. Und während sich die Welt auf die Compu- terrevolution, die Weltraum- und Gen-Technik kon- zentrierte, wurde die „Flüssigglas-Technologie“in Deutschland weiter entwickelt und es wur-den Produkte kreiert, die einfach anzuwenden und aufzutragen waren. Ziel war es, eine un- sichtbare Schicht zu erzeugen, die nahezu jede Oberfl äche schützen und deren Eigen- schaften verbessern kann. Nach der Jahrtau- sendwende waren diese Art von Beschich- tungen dann erstmals marktreif. Wir sind stolz, das wir von Anfang an mit dabei waren, diese Technologie in vielen Märkten mit einzu- führen.

A.L.G.T (Advanced Liquid Glass Technology = Weiterentwickelte FlüssigglasTechnologie)Es sind nun über 150 Jahre seit der Entdeckung des Sol-Gel-Pro- zesses vergangen und es wird permanent weiter an derTechnologie geforscht und entwickelt.Aufgrund unserer Vernetzung mit einigen der führenden Forschungs- und Entwicklungsfi rmen in Deutsch- land in diesem Bereich sind wir heute in der Lage, Ihnen die 3. Generation von Flüssigglas-Produkten anzubieten und zu liefern - effi ziente Beschichtungen zu bezahlbaren Preisen. Im Wesentlichen ist A.L.G.T. der derzeitige Höhepunkt der Entwicklung nach 150 Jahren.Wo wird die Reise in den nächsten 150 Jahren hingehen? Selbstverständlich haben wir auf diese Frage keine Antwort.Wir können Ihnen aber in jedem Fall den aktuellen Stand dieser Tech- nologie für die Welt von heute liefern.

It all started in Paris in 1845, when J.J. Ebelmen, a French scientist fi rst discovered the Sol Gel process. In simple terms, he discovered that by manipulating a liquid which contained silica he could create glass. This was a very interesting theoretical discovery but at this time all that he was left with was small lumps of glass which were of no specifi c use. The next major step came in 1939 when the Schott Glaswerke company of Germany started to re-examine the technology. After a further 20 years of research they started to produce the fi rst items coated with * SiO² ; however the processes were still complex and expensive. Evidently continued

R+D was called for! Whilst the world was focussing on the space race, the computer revolution and the genome

projects, the scientifi c community in Germany was creating “liquid glass technology” which could be

applied on a DIY basis. The target being, to produce an undetectable coating, which could protect and enhance almost any surface. At the start of the millennium such coatings became available for the fi rst time and we are proud to say that we were involved in their launch to a wide range of markets.

A.L.G.T. (Advanced Liquid Glass Technology). It has now been over 150 years since the discovery

of the Sol Gel process and advances are continually being made. Due to our being linked with the leading

R+D organisations in Germany we are able to bring you the 3rd Generation of Liquid Glass Technology via which we offer more effi cient coatings, at reduced cost to the consumer. In essence A.L.G.T. is the culmination of 150 years of development. Where will we be in another 150 years?

Obviously we do not know the answer to this question ... but we do know that we offer state of the art technology for the world of today.

*Silica (silicon dioxide or SiO²) is one of the most common chemical compounds.

ADVANC

ED L

IQUID GLASS TECHNOLOGY

A.L.G.T.©

3

GLAS / KERAMIKDurch LiquiGlas® GLAS & KERAMIK Veredelung erhalten Oberflächen aus Glas wie z.B. Fenster, Dachfenster, Wintergärten, Balkontüren, Schaufenster, Vitrinen, Glasfassaden uvm. einen nur geringen Kontakt mit Schmutzpartikeln. Verschmutzungen, Fingerabdrücke und Wasserflecken lassen sich leicht und ohne Verwendung von aggressiven chemischen Reinigungsmitteln entfernen.

Art. Nr. 405125ml Vorreiniger50ml Veredelung (für 20-30m²)5 Trockentücher+ GebrauchsanleitungEAN Code 4260168444054

Art. Nr. 401Veredelungstücher, besonders geeignet für kleinere Flächen wie z.B. Autoscheiben, Set bestehend aus:2 Vorreinigungstücher 160 x 220mm2 Veredelungstücher 160 x 220mm (für ca. 2-2.5m² pro Tuch)+ GebrauchsanleitungEAN Code 4260168444016

GLASS / CERAMICSSurfaces which have been coated with LiquiGlas® GLASS & CERAMICS become resistant to soiling. Grime, finger marks and water stains can be easily removed without using aggressive chemical cleaning agents. Ideal for use on wash basins, shower screens, windscreens, windows, skylights, conservatories, balcony doors, shop windows, glass cabinets, glass facades, mirrors and much more.

Art. No. 405125ml pre-cleaner50ml treatment (for 20-30m²)5 dry wipes+ user instructionsEAN Code 4260168444054

Art. No. 401Treatment wipes, ideally suited for small surfaces, e.g. carwindscreen, kit content:2 pre-cleaning wipes 160 x 220mm2 treatment wipes 160 x 220mm (coverage appr. 2-2.5m² per wipe)+ user instructionsEAN Code 4260168444016

KUNSTSTOFFLiquiGlas® KUNSTSTOFF ist ein anwendungsfertiges Produkt, optimiert für Oberfl ächen aus Kunststoff wie z.B. Bodenbeläge, Arbeitsoberfl ächen, Duschkabinen, Auto-Cockpit, Kühlschrank, Gartenmöbel, Küchengeräte und Motorradhelme. Erleichtert die Reinigung von Verschmutzungen.

Art. Nr. 447125ml Vorreiniger50ml Veredelung (für 20-30m2)5 Trockentücher+ Gebrauchsanleitung EAN Code 4260168444474

Art. Nr. 445Veredelungstücher, besonders geeignet für kleinere Flächen, Set bestehend aus:2 Vorreinigungstücher 160 x 220mm 2 Veredelungstücher 160 x 220mm (für ca. 2-2.5m2)+ Gebrauchsanleitung EAN Code 4260168444450

PLASTICLiquiGlas® PLASTIC is suitable for coating domestic surfaces such as wash basins, shower screens, fridges, works surfaces, car dashboard/interior, garden furnitures, motorcycle helmets, ski etc.

Art. No. 447125ml pre-cleaner50ml treatment (for 20-30m²)5 dry wipes+ user instructionsEAN Code 4260168444474

Art. No. 445Treatment wipes, suitable especially for small surfaces, kit content:2 pre cleaning wipes 160 x 220mm2 treatment wipes 160 x 220mm (for 2-2.5m²)+ user instructionsEAN Code 4260168444450

TEXTIL & LEDERDurch LiquiGlas® TEXTIL erhalten Textilien einen unsichtbaren Schutz gegen Schmutz, Wasser uvm. Geeignet für Markisen, Stoffbezüge, Zelte, Cabriover-decke, Autositze, Freizeit- und Arbeitsbekleidungen, Tischdecken, Sonnenschirme, Polstermöbel, Hemden, Blusen, Krawatten, Sakkos uvm.

Art. Nr. 410250ml (für bis zu 10m², je nach Saugfähigkeit des Materials)+ Gebrauchsanleitung EAN Code 4260168444108

Höherwertige Version, speziell geeignet für Schuhe und stark beanspruchte Textilien.

Art. Nr. 415125ml (für bis zu 5m², je nach Saugfähigkeit des Materials) + Gebrauchsanleitung EAN Code 4260168444153

TEXTILE & LEATHERAfter treatment with LiquiGlas® TEXTILE, textiles benefit from a completely undetectable protective coating. The coating prevents water and soiling agents etc. from staining the fabric. It offers effective protection on sun blinds, fabric coverings, car and yacht furnishings, leisure wear, work clothes, upholstery, carpets, shirts, blouses as well as ties and jackets, children’s car seats, mattresses etc.

Art. No. 410250ml (for up to 10m², depending on the surface area and absorbency of the textile) + user instructionsEAN Code 4260168444108

High quality variant, especially suitable for shoes and textiles which experience heavy usage.

Art. No. 415125ml (for up to 5m², depending on the surface area and absorbency of the textile) + user instructionsEAN Code 4260168444153

410 415

WWW.LIQUI-GLAS.COM

Welcome to the world of SiO2 Liquid Glass, nano layering technology. The product which you have before you offers truly stunning characteristics. Frequently asked questions:

So what does Nano mean?A nanometer is a unit of measurement.1nm (nanometer) is one billionth of a metre. The name “Nano” comes from the Greek “Nanos” which means dwarf.

Does our liquid glass contain any potentially harmful “nano” particles?No. Our coatings are recognised as being particle free. Our technology is based on molecular SiO2, which is created via an adaptation of the Sol-Gel process.

Why can´t you see our treatment?Our thinnest coatings are approximately 100nm thick. This means that they are approximately 500 times thinner than the a human hair and you need to use an electron microscope to see the coatings.

So what exactly does the product contain?This truly amazing product contains pure, particle free, SiO2 (Silicon Dioxide) which means that it contains “pure glass”. The glass is in a molecular form and is held in a liquid; it does not become “glass” until it is allowed to dry. The glass in windows is not pure!

So how does the nano coating work and what are the benefi ts?The liquid glass coating is a highly durable, fl exible, super smooth, breathable and Super Phobic coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated as each fi lament of every fi bre is protected with a nano scale layer of glass. Most signifi cantly, almost all treated surfaces can be cleaned with water alone. This means that in most instances environmentally damaging cleaning chemicals are not needed.

When is the surface suffi ciently coated?After applying the coating to the surface ensure that the whole of the surface is coated by working across the area.Work quickly and in in a methodical manner. Over application results in a visble deposit which can be buffed off.

Are surfaces coated with LIQUIGLAS® self cleaning?No, we offer “easy clean” technology. LIQUIGLAS® has non-stick characteristics; similar to pans which are coated with non stick coatings.

How long will the protection last?Every environment is different as some living spaces encounter heavy usage whilst others encounter far less “wear and tear.” The treatments are all very durable and they will last for many months or even years. We expect the hard surface coatings to last for at least 6 months in domestic environments.


Ideal for coating Windows - bath tubs - shower screens,

WC - mirrors - tiles - windscreens, wash basins etc.

The beading effect has disappeared or become weaker - why?Either the coating has worn away after prolonged use or the surface needs to be cleaned in order to re expose the surface. Wiping with pre cleaner or an alcohol cleaner will also rejuvenate the coating.

Can the treatments be re applied?Re application follows the format used during the initial application process; simply make sure that the surface is completely clean , dry and free of contaminants such as washing powder residue, or detergents. Please read the section relating to “application”.

Are the LIQUIGLAS® coatings “food safe”?All of our coatings have been tested by independent agencies and are food safe.

Are the LIQUIGLAS® coatings dermatologically tested?All of our products are subjected to dermatological testing.

Are the LIQUIGLAS® coatings heat tolerant?Liquid glass is stable between -150°C and +450°C.

Can I apply LIQUIGLAS® to any surface? Liquid Glass bonds to most surfaces via quantum forces. The coatings can’t be applied to oily woods, hybrid stone mixtures or non stick surfaces. There are no glues, resins or other chemicals within this product.

Are LIQUIGLAS® products environmentally friendly?Our technology is recognised as being of great signifi -cance in the battle to protect our planet.The technology has won several awards from leading “environmental” agencies.It should be remembered that in most instances treated surfaces can be cleaned with water alone this means that a vast amount of POPs (Persistent Organic Pollut-ants) such as detergents can be withdrawn from sale.

Can calcium deposits be removed more easily from a surface coated with LIQUIGLAS®? Laboratory tests show that calcium deposits can be removed from a coated glass plate with one fi fth of the energy normally needed to remove scale from an uncoated sample. Warm water should be applied to the deposits before wiping them off.

Please share your experience with the team at LIQUIGLAS®. If you have tested a new applica-tion and found it good, we may publish it on our website. We will be pleased to forward a sample items of a new LIQUIGLAS® coating to any person who has their comments published on our web page. For more information, visit www.liqui-glas.com

Contents:125 ml pre-cleaner, 50ml treatment (for 20-30m²),

5 dry wipes

405 401

PRODUKTE / PRODUCTS

WWW.LIQUI-GLAS.COM

Welcome to the world of SiO2 Liquid Glass, nano layering technology. The product which you have before you offers truly stunning characteristics. Frequently asked questions:So what does Nano mean?A nanometer is a unit of measurement.1nm (nanometer) is one billionth of a metre. The name “Nano” comes from the Greek “Nanos” which means dwarf. Does our liquid glass contain any potentially harmful “nano” particles?No. Our coatings are recognised as being particle free. Our technology is based on molecular SiO2, which is created via an adaptation of the Sol-Gel process.Why can´t you see our treatment?Our thinnest coatings are approximately 100nm thick. This means that they are approximately 500 times thinner than the a human hair and you need to use an electron microscope to see the coatings.So what exactly does the product contain?This truly amazing product contains pure, particle free, SiO2 (Silicon Dioxide) which means that it contains “pure glass”. The glass is in a molecular form and is held in a liquid; it does not become “glass” until it is allowed to dry. The glass in windows is not pure!So how does the nano coating work and what are the benefi ts?The liquid glass coating is a highly durable, fl exible, super smooth, breathable and Super Phobic coat-ing (=repels oil , water, and dry soiling). Dry dirt will not stick to treated surface as each fi lament of every fi bre is protected with a nano scale layer of glass. Most signifi cantly, almost all treated surfaces can be cleaned with water alone. This means that in most instances environmentally damaging clean-ing chemicals are not needed.When is the surface suffi ciently coated?After applying the coating to the surface ensure that the whole of the surface is coated by working across the area.Work quickly and in in a methodical manner. Over application results in a visble deposit which can be buffed off. Can I remove spills and staining? Liquid spills can be removed from coated fabrics by mopping with a dry tissue. Already dried stains can be removed by sponging with a damp cloth. Are surfaces coated with LIQUIGLAS® self cleaning?No, we offer “easy clean” technology. LIQUIGLAS® has non-stick characteristics; similar to pans which are coated with non stick coatings.Does the coating reduce scratching on “plastic” shower screens?The LIQUIGLAS® coatings are very durable and they will reduce the abrasion of plastic surfaces.What is the best way to clean the coated surface?It is best to clean the surface with warm water and a microfi bre cloth. Dry the surface with a cloth or tissue to get that “good as new” look.Do you need cleaning agents to clean coated surfaces?One of the benefi ts of using LIQUIGLAS® is that in most instances the technology removes the need to use environmentally damaging cleaning products.How long will the coating last?The LIQUIGLAS® coating is removed by abrasion . Some plastic surfaces are used and cleaned frequently ( eg.work tops , shower trays, wash basins ) Other surfaces are cleaned less frequently( eg refrigerators) The coating on a wash basin will last for many months . The coating on a fridge should last for at least one year.

Will hot water remove the coating?

The coatings are heat tolerant in the range -150°C to +450°C.Some plastic surfaces are very hydrophobic (repel liquids). Can the LIQUIGLAS® be applied to these surfaces?Some surfaces are coated with thin waxes or special agents when they are manufactured. It is es-sential that these are removed prior to applying LIQUIGLAS®.Also, some “new” surfaces benefi t from being vigorously cleaned with a microfi bre cloth prior ot deep cleaning and application.How do I know when the coating is no longer in place?Water will no longer “bead” on the surface and cleaning will become more diffi cult and less effectiveCan the surface become dirty over time?Over time microscopicaly small soiling agents can adhere to the surface. Wiping with an alcohol based cleaner will rejuvinate the surface.The beading effect has disappeared or become weaker - why?Either the coating has worn away after prolonged use or the surface needs to be cleaned in order to re expose the surface. Wiping with pre cleaner or an alcohol cleaner will also rejuvenate the coating.Can the treatments be re applied?Re application follows the format used during the initial application process; simply make sure that the surface is completely clean , dry and free of contaminants such as washing powder residue, or detergents. Please read the section relating to “application”.Are the LIQUIGLAS® coatings “food safe”?All of our coatings have been tested by independent agencies and are food safe.Are the LIQUIGLAS® coatings ´dermatologically tested?All of our products are subjected to dermatological testing.Can I apply LIQUIGLAS® to any surface? Liquid Glass bonds to most surfaces via quantum forces. The coatings can’t be applied to oily woods, hybrid stone mixtures or non stick surfaces. There are no glues, resins or other chemicals within this product.Are LIQUIGLAS® products environmentally friendly?Our technology is recognised as being of great signifi cance in the battle to protect our planet.The technology has won several awards from leading “environmental” agencies.It should be remembered that in most instances treated surfaces can be cleaned with water alone this means that a vast amount of POPs (Persistent Organic Pollutants) such as detergents can be withdrawn from sale.Can calcium deposits be removed more easily from a surface coated with LIQUIGLAS®? Laboratory tests show that calcium deposits can be removed from a coated glass plate with one fi fth of the energy normally needed to remove scale from an uncoated sample. Warm water should be applied to the deposits before wiping them off.

Please share your experience with the team at LIQUIGLAS®. If you have tested a new application and found it good, we may publish it on our website. We will be pleased to forward a sample items of a new QLG coating to any person who has their comments published on our web page. For more information, visit www.liqui-glas.com

Contents:2 pre-cleaning wipes 160 x 240mm2 treatment wipes 160 x 240mm

(coverage approx. 2-2.5m² per wipe)

PLASTICPROTECTION

Ideal for coatingWash basins, shower screens, fridges, works surfaces, car dashboard/

interior, garden furniture, motorcycle helmets/visors, skis etc.

WWW.LIQUI-GLAS.COM


Ideal for coating ….Windows - bath tubs - shower screens,

mirrors - tiles - windscreens, wash basins etc.



How LIQUIGLAS® works. Under a microscope most surfaces are very rough and look like mountain ranges. Dirt and bacteria nor-mally cling to these surfaces. Traditional cleaners, which are often environmentally damaging, fail to fully remove the dirt or they apply a coating on top of the dirt which makes the surface look clean. LIQUIGLAS® coats these “mountains” with pure, nano scale particle free glass, which is 500 times thinner than a human hair. The newly coated surface is super-phobic and so rejects soiling agents. Amaz-ingly this coating is breathable, fl exible yet super durable. The coating is environmentally friendly as it is created from quartz sand. Additionally the coatings can be cleaned with water which reduces the use of harmful chemicals.Your cleaning costs are also reduced!

Suitable for application on:Glass and ceramic surfaces, ideal for use on wash basins, shower screens, windscreens, windows, skylights, conservatories, balcony doors, shop windows, glass cabinets, glass facades, mirrors and much more.

Application:1. Initially clean the surface to remove any heavy soiling such as fats and soap residues. Rinse or wipe down the surface with clean water and then dry the surface.Spray LIQUIGLAS® pre cleaner on the surface and thoroughly clean the area with a clean cloth or tissue. (It is advisable to wear gloves as a fingerprint can be 100 times thicker than the coating.) The surface is now residue-free and the prepared for the application of LIQUIGLAS® pre cleaner.2. Spray LIQUIGLAS® Glass & Ceramic on the clean surface or onto a suitable low absor-bency wipe and ensure full coverage by wiping the liquid over the whole surface. (3ml per m² is an approximate coverage rate) After 2 minutes finish the application by gently buffing the surface for a few seconds. The surface is now coated with a dirt-repelling and UV-stable protection.Warning: Flammable. Keep out of reach of children. Keep away from sources of ignition - No smoking. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label.

Product features: Easy to use Dirt-repelling Hydrophobic (repels water) Environmentally neutral No negative impact on visual appearance Long-lasting Anti-microbial Economical Multi award winning technology (including internationally

recognized environmental award)

Made in Germany



NOLO

GY

A.L.G.T.®

447 445


GLASS / CERAMICSGLASS / CERAMICSPROTECTIONPROTECTION

Ideal for coating ….Ideal for coating ….Windows - bath tubs - shower screens,Windows - bath tubs - shower screens,

mirrors - tiles - windscreens, wash basins etc.mirrors - tiles - windscreens, wash basins etc.



WWW.LIQUI-GLAS.COM

PLASTICPROTECTION

Ideal for coating ….Wash basins, shower screens, fridges, works surfaces,

car dashboard/interior, garden furniture, motorcycle helmets/visors, skis etc.



How LIQUIGLAS® works. Under a microscope most surfaces are very rough and look like mountain ranges. Dirt and bacteria normally cling to these surfaces. Traditional clean-ers, which are often environmentally damaging, fail to fully remove the dirt or they apply a coating on top of the dirt which makes the surface look clean. LIQUIGLAS® coats these “mountains” with pure, nano scale particle free glass, which is 500 times thinner than a human hair. The newly coated surface is super-phobic and so rejects soiling agents. Amazingly this coating is breathable, fl exible yet super durable. The coating is environmentally friendly as it is created from quartz sand. Additio-nally the coatings can be cleaned with water and so reduces the use of harmful chemicals. Your cleaning costs are also reduced!

Suitable for application on:Wash basins, shower screens, fridges, works surfaces, car dashboard/interior, garden furniture, motorcycle helmets/visors, skis etc.

Application:1. Initially clean the surface to remove any heavy soiling such as soap particles. Rinse or wipe down the surface with clean water and then dry the surface. Next, deep clean the surface with the pre cleaning wipe (It is advisable to wear gloves as a fingerprint can be 100 times thicker than the coating.) The surface is now residue-free and the prepared for the application of LIQUIGLAS® Plastic.

2. Use the wipe to apply LIQUIGLAS® Plastic on the clean surface. Ensure full coverage. Work quickly as the wipe will dry after 3 minutes. Allow the surface to dry for a further 3 minutes then buff with a soft cloth. The surface is now coated with a dirt-repelling and anti microbial coating.

Warning: Flammable. Keep out of reach of children. Keep away from sources of ignition - No smoking. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label.

Product features:Easy to use, Dirt-repelling, Hydrophobic (repels water),Environmentally neutral, No negative impact on visual appearance, Long-lasting, Anti-microbial, Economical, Multi award winning technology (including internationally reco-gnized environmental award)

Made in Germany



NOLO

GY

A.L.G.T.®

LIQUIGLAS®

Shoe can be used to protect leather, suede and fabric footwear.By applying LIQUIGLAS®

Shoe on to the surface of your footwear you will be protecting the surface with a undetectable, super durable, stain repelling layer of pure nano scale glass. Ideal for use on training shoes, fabric basket ball shoes, suede shoes, non coated/polished leather, handbags etc. The multi award winning technology is easy to apply. Firstly ensure that the surface is completely clean as the coating will not adhere to any form of dirt, or grease. The coating can be applied to moist fabrics. Spray the coating on to the surface from a distance of approximately 25cm ensuring that the surface is fully coated and moistened. Two spraying passes is normally sufficient. Wipe over the surface with a gloved hand, if over application causes pooling on the surface. This action will disperse the liquid. The coating becomes fully bonded after drying for 24hrs at room temperature. Warm air drying can be used. Cleaning: Coated items should be cleaned

SHOEPROTECTION

WWW.LIQUI-GLAS.COM

TexTile & leaTher

ProTecTion

www.LIQUI-GLAS.COM

LIQUIGLAS®

Textile and Leather treatment protects fabrics, suede and leather* with and undetectable layer of nano scale, particle free glass. The coating which is approximately 500 times thinner than a human hair is flexible, breathable highly durable and anti microbial. It protects against dust, oil, grease, water and liquids such as tea and coffee.(*Some leathers and suede are protected with special oils or coating, as a result bonding of the Quantum LiquiGlas® may be impaired. In all instances staining agents must be removed from suede and leather within 2-3 minutes. ) LIQUIGLAS® Textile and Leather is ideal for use on upholstery, mattresses, suits, car seats, ties, outdoor wear, work wear etc.Application: To achieve a long lasting effect all surfaces must be completely clean, stable and free of any coatings such as conditioners or silicones. Firstly test for colour fastness on an area that will be hidden from view.To apply LIQUIGLAS® Textile and Leather spray the surface from a distance of approximately 25cms. Ensure that the fabric is evenly and fully moistened but not “soaking wet”. (2-3 spraying passes, “wet on wet”, is usually sufficient for a medium thickness fabric such as a tie or blouse. Thicker fabrics normally require further spraying passes.) Disperse any over-application of the liquid by wiping the surface with a gloved hand. The coating becomes fully functional after 24hrs. warm air drying can be used. The coating can be ironed using a low temperature setting. Clean with warm water max 60°C. Sponging or soak washing is advised. Coverage: For up to 10 m², depending on the density and surface area of the fabric. Keep out of reach of children. Do not spray into the eyes, do not drink. If swallowed, seek medical

advice immediately

and show this container and label.

Do not inhale atomized spray. Irrigate with water

if splashed into the eyes. Seek medical guidance if any conditions

persist. Use the contents of the bottle within 6 months of opening. Protect the

bottled liquid from frost. How LIQUIGLAS® works. Under a microscope most surfaces are very rough and look like mountain ranges. Dirt and bacteria normally cling to these surfaces. Traditional cleaners, which are often environmentally damaging, fail to fully remove the dirt or they apply a coating on top of the dirt which makes the surface look clean. LIQUIGLAS® coats these “mountains” with pure, nano scale particle free glass, which is 500 times thinner than a human hair. The newly coated surface is super-phobic and so rejects soiling agents. Amazingly this coating is breath-able, flexible yet super durable. The coating is environmentally friendly as it is created from quartz sand. Additionally the coatings can be cleaned with water which reduces the use of harmful chemicals. Your cleaning costs are also reduced!


repellant food safe environmentally neutral breathable and flexible physiologically neutral highly durable undetectable temperature resistant reduces use of cleaning




Made in Germany

ADVAN

CED


A.L.G.T.®


PLASTICPLASTICPROTECTIONPROTECTION

Ideal for coating ….Ideal for coating ….Wash basins, shower screens, fridges, works surfaces, Wash basins, shower screens, fridges, works surfaces,

car dashboard/interior, garden furniture, car dashboard/interior, garden furniture, motorcycle helmets/visors, skis etc. motorcycle helmets/visors, skis etc.



4

WCAuf veredelten WC-Sitzen lassen sich Schmutz und Bakterien durch Abwischen mit einem feuchten Tuch und ohne chemische Reiniger problemlos entfernen. Geeignet für WC-Sitze und Toilettensitzerhöhungen (im Pflegebereich). Der lang anhaltende antimikrobielle Effekt des Produktes ersetzt jedoch nicht die Desinfektion bei extrem hoher Bakterienkontamination.

Art. Nr. 460Set, Inhalt:2 Vorreinigungstücher 100 x 140mm2 Veredelungstücher 100 x 140mm (ein Tuch pro WC Sitz)+ GebrauchsanleitungEAN Code 4260168444603

WC / HYGIENIC TOILET WIPEAfter treatment with LiquiGlas® HYGIENIC Protection for WC’s, dirt and bacteria can be wiped off toilet seats with great ease. Anti-bac.

Art. No. 460Kit, content:2 pre-cleaning wipes 100 x 140mm2 treatment wipes 100 x 140mm (1 wipe protects one toilet seat set)+ user instructionsEAN Code 4260168444603

BRILLEDurch die LiquiGlas® BRILLEN Veredelung erhalten sämtliche Brillen einen nur geringen Kontakt mit Schmutzpartikeln. Verschmutzungen, Fingerabdrücke und Wasserflecken lassen sich leicht und ohne Verwendung von aggressiven chemischen Reinigungsmitteln entfernen. Langanhaltende Versiegelung erleichtert das Reinigen erheblich. Ideal auch für Sportbrillen. Flüssigkeit enthält Alkohol, nicht für alkoholempfindliche Brillen geeignet.

Anwendungsgebiete:Brille, Skibrille, Arbeitsbrille, Sonnenbrille

Art. Nr. 402Set, Inhalt:3 Vorreinigungstücher 100 x 140mm3 Veredelungstücher 100 x 140mm (ein Tuch pro Brille)+ GebrauchsanleitungEAN Code 4260168444023

SPECTACLE PROTECTIONSurfaces which have been coated with LiquiGlas® SPECTACLES protection become resistant to soiling and abrasion. Finger marks and water stains are easily removed without using aggressive chemical cleaning agents. Ideal for all spectacles, lenses and sunglasses. Recommended when sailing or working in rainy conditions as liquids do not adhere to coated surfaces.

Suitable for ski goggles, industrial eye coverings, sun glasses and spectacles.

Art. No. 402Kit, content:3 pre-cleaning wipes 100 x 140mm3 treatment wipes 100 x 140mm (one wipe per pair of spectacles)+ user instructionsEAN Code 4260168444023

FELGEDurch LiquiGlas® FELGEN Veredelung erhalten Felgen wie z.B. Auto-, Fahrrad- oder Motorradfelgen einen nur geringen Kontakt mit Schmutzpartikeln. Fett, Öl, Bremsstaub und Schmutz lassen sich leicht und ohne Verwendung von aggressiven chemischen Reinigungsmitteln entfernen. Verhindert das Einbrennen von Bremsstaub.

Art. Nr. 440Set, Inhalt:4 Vorreinigungstücher 160 x 220mm4 Veredelungstücher 160 x 220mm (ein Tuch pro Felge)+ GebrauchsanleitungEAN Code 4260168444405

ALLOY WHEELThe LiquiGlas® ALLOY WHEEL treatment inhibits the adhesion of soiling agents. Grease, oil, brake dust and road grime can be removed easily and without application of aggressive chemical cleaning agents. LiquiGlas® ALLOY WHEEL prevents the “burning in” of brake dust.

Art. No. 440Kit, content:4 pre-cleaning wipes 160 x 220mm4 treatment wipes 160 x 220mm (one wipe per rim)+ user instructionsEAN Code 4260168444405

WWW.LIQUI-GLAS.COM






So how does the nano coating work and what are the benefi ts?The liquid glass coating is a highly durable, fl exible, super smooth, breathable and Super Phobic coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated surface as each fi lament of every fi bre is protected with a nano scale layer of glass. Most signifi cantly, almost all treated surfaces can be cleaned with water alone. This means that in most instances environmen-tally damaging cleaning chemicals are not needed.


Can I use the coating on all alloy wheels?Most alloy wheels are coated with a lacquered fi nish at the manufacturing stage. LIQUIGLAS® Alloy Wheel coating is designed for use on such wheels. For uncoated alloy wheels please use the LIQUIGLAS® for stainless steel and aluminium (art. no. 470).

Is the coating removed after washing in auto car washes?All LIQUIGLAS® coatings are highly durable and they will withstand numerous washing cycles. This would equate to over a hundred washing cycles with water and a micro fi bre. It is not possible to provide exact information about the number of auto wash cycles that the coating will withstand but test data indicates that the coating withstands many tens of auto wash cycles.

Does road salt degrade the coating?The coatings are resistant to road salt and all standard cleaning chemicals.

Can I wash the coated surface with abrasive pads or cleaning agents?Abrasive pads or agents should not be used. In most instances all cleaning can be conducted with water and a cloth or soft brush.

Does the coating withstand heat and cold?The coatings are highly resistant to temperature (-150 C to + 450 C) and so hot brake dust will not burn into the coating.

ALLOY WHEEL PROTECTION

Ideal for use on car rims, bicycle rims & motorcycle rims.

Can I apply the coating in the rain?The coating can only be applied to dry surfaces.

Can I apply the coating in hot sunlight?The coating should not be applied in direct hot sunlight or to very warm surfaces.

Can I drive the vehicle immediately after application?The vehicle can be driven fi ve minutes after the application of the coating has been completed.


How long will the protection last?Every environment is different as some living spaces encounter heavy usage whilst others encoun-ter far less “wear and tear.” The treatments are all very durable and they will last for many months or even years. We expect the hard surface coatings to last for at least 6 months in domestic environments.







Are LIQUIGLAS® products environmentally friendly?Our technology is recognised as being of great signifi cance in the battle to protect our planet.The technology has won several awards from leading “environmental” agencies.It should be remembered that in most instances treated surfaces can be cleaned with water alone this means that a vast amount of POPs (Persistent Organic Pollutants) such as detergents can be withdrawn from sale.


Contents:4 pre-cleaning wipes 160 x 240 mm

4 treatment wipes 160 x 240 mm (1 wipe per auto wheel)

WWW.LIQUI-GLAS.COM








Can I use LIQUIGLAS® for spectacles on all glass and plastic lenses?Almost all modern spectacle lenses are made of „plastic“ and the enclosed wipes are designed for plastic surfaces. The coating will not bond effi ciently to glass.

Will the LIQUIGLAS® treatment damage special coatings which are already in place on my spectacles?The LIQUIGLAS® coating is designed to be applied directly on to the surface of the lens. It is not possible to predict how the LIQUIGLAS® coating will perform on all of the wide range of special coatings which are applied to some lenses.

How long will the coating last?The coating will last for many months and up to a year.

Can I clean the coated surface with spectacle cleaning agents?After coating lenses with LIQUIGLAS® all cleaning can be conducted with water and a cloth and so expensive cleaning agents are not needed. (Alcohol based lens cleaning agents will not damage the coating.)

Will the coating have a negative effect on the optical performance the lens?The coating is approximately 100nm thick (500 times thinner than human hair) and so it will not have any recogniseable effect on light transmission.

Does the coating prevent abrasion of the lens?The coatings are highly durable and inhibit abrasion and scratching.

SPECTACLE PROTECTION

Ideal for all plastic spectacles, lenses, sunglasses and visors

Can I wear the spectacles immediately after coating them?The spectacles can be worn immediately after appliction but do not clean the lenses until at least one hour has elapsed.

Is the coating suitable for sun glasses?The coatings are ideal for use on sunglasses.




Can the treatments be re applied?Re application follows the format used during the initial application process; simply make sure that the surface is completely clean, dry and free of contaminants such as washing powder residue, or detergents. Please read the section relating to “application”.







Contents:3 pre-cleaning wipes 100 x 140mm3 treatment wipes 100 x 140mm(1 wipe per pair of spectacles)

WWW.LIQUI-GLAS.COM


So what does Nano mean?A nanometer is a unit of measurement.1nm (nanometer) is one billionth of a metre.The name “Nano” comes from the Greek “Nanos” which means dwarf.





When is the surface suffi ciently coated?After applying the coating to the surface ensure that the whole of the surface is coated by working across the area. Work quickly and in in a methodical manner. Over application results in a visble deposit which can be buffed off.

Is the LIQUIGLAS® Hygienic / Toilet suitable for use on the ceramic surfaces of the WC?The LIQUIGLAS® fHygienic / Toilet is designed for application to plastic or lacquered surfaces and so it is not suitable for application to ceramic surfaces.

What is the best way to clean the coated WC seat? The seat can be cleaned with warm water and a cloth or disposable tissue; however despite offering highly effective background anti microbial protection there are circumstances in which additional disinfection may be necessary.

Will cleaning products damage the coating?Standard non abrasive domestic cleaning products will not damage the coating. Do not use any abrasive pads or abrasive cleaning agents on coated surfaces.

HYGIENIC / TOILET PROTECTION

Ideal for coatingtoilet seats and plastic surfaces located in the toilet area.

(Ideal for use where high levels of cleanliness are essential.)

How do I know when to re apply the coating?Water droplets will form “beads“ on the coated surface. Water droplets become fl attened when the coating has worn away.











Contents:2 pre-cleaning wipes 100 x 140mm2 treatment wipes 100 x 140mm

(1 wipe protects one toilet seat set)

PRODUKTE / PRODUCTS

460

402

440

5

EDELSTAHL / ALUMINIUMLiquiGlas® EDELSTAHL ist ein anwendungsfertiges Produkt, das für Oberflächen aus Edelstahl im Küchenbereich, wie z.B. Dunstabzugshauben, optimiert ist. Erleichtert die Reinigung von Verschmutzungen und Wasserflecken.

Art. Nr. 470Set, Inhalt: 3 Vorreinigungstücher 100 x 140mm3 Veredelungstücher 100 x 140mm (je Tuch für bis zu 1m²)+ GebrauchsanleitungEAN Code 4260168444702

STAINLESS STEEL / ALUMINIUMLiquiGlas® STAINLESS STEEL is a productoptimized for application on stainless steel and aluminium surfaces.Easy-to-clean surfaces are created in minutes. This coating makes the removal of dirt, fi nger marks and water stains very straight forward.

Art. No. 470Kit, content:3 pre-cleaning wipes 100 x 140mm3 treatment wipes 100 x 140mm (coverage for up to 1m²)+ user instructionsEAN Code 4260168444702

OFEN / GRILLLiquiGlas® BACKOFEN UND GRILL verhindert das Einbrennen von Speiseresten im Backofen und Grill, an Kuchenformen etc. Leichtes und müheloses Reinigen z. B. der Backofenoberfläche.

Art. Nr. 450Set, Inhalt: 2 Vorreinigungstücher 160 x 220mm2 Veredelungstücher 160 x 220mm (ein Tuch ist ausreichend für ein Backblech oder den Backofeninnenraum eines haushaltsüblichen Ofens)+ GebrauchsanleitungEAN Code 4260168444504

OVEN / BARBECUELiquiGlas® OVEN AND BARBECUE prevents food particles from becoming fully bonded to oven, grill and baking tin surfaces etc., creates an easy-to-clean surface. Coated surfaces can be cleaned with water alone, stainless steel surfaces retain an “as good as new “ appearance.

Art. No. 450Kit, content:2 pre-cleaning wipes 160 x 220mm2 treatment wipes 160 x 220mm (1 wipe is sufficient for 2 baking sheets or for the interior surfaces of a small oven)+ user instructionsEAN Code 4260168444504

STEINMit LiquiGlas® STEIN erhalten sämtliche porösen Untergründe einen langlebigen Witterungsschutz, z. B. Sandsteine, Naturwerksteine, Betonsteine, Terrakotta, Tonziegeln uvm.

Art. Nr. 420250ml (für bis zu 10m²)+ GebrauchsanleitungEAN Code 4260168444207

STONEThe LiquiGlas® STONE coating protects stone surfaces with a super durable, breathable and undetectable glass coating .This easy to apply coating protects against soiling, moisture, abrasion, algae and the negative effects of weathering.

Art. No. 420250ml (for up to 10m²)+ user instructionsEAN Code 4260168444207

HOLZDurch LiquiGlas® HOLZ erhalten unbehandelte Naturhölzer wie z.B. Gartenmöbel aus Holz, Kinderspielzeug oder Saunaflächen einen wasser- und schmutzabweisenden UV-stabilen Oberflächenschutz. Nicht geeignet zur Versiegelung von ölendem Holz wie z.B. Teak.

Art. Nr. 430250ml (für bis zu 10m²)+ GebrauchsanleitungEAN Code 4260168444306

WOODThe LiquiGlas® WOOD coating is for untreated „natural“ wood, e.g. natural wooden garden furniture, toys, sauna areas, ornamental items. Not suitable for coating oily wood such as teak.

Art. No. 430250ml (for up to 10m²)+ user instructionsEAN Code 4260168444306

www.LIQUI-GLAS.COM

welcome to the world of SiO2 Liquid Glass, nano layering technology. The product which you have before you offers truly stunning characteristics. Frequently asked questions: So what does Nano mean?A nanometer is a unit of measurement.1nm (nanometer) is one billionth of a metre.The name “Nano” comes from the Greek “Nanos” which means dwarf. Does our liquid glass contain any potentially harmful “nano” particles? No. Our coatings are recognised as being particle free. Our technology is based on molecular SiO2, which is created via an adaptation of the Sol-Gel process. why can´t you see our treatment? Our thinnest coatings are approximately 100nm thick. This means that they are approximately 500 times thinner than the a human hair and you need to use an electron microscope to see the coatings. So what exactly does the product contain? This truly amazing product contains pure, particle free, SiO2 (Silicon Dioxide) which means that it contains “pure glass”. The glass is in a molecular form and is held in a liquid; it does not become “glass” until it is allowed to dry. The glass in windows is not pure! So how does the nano coating work and what are the benefits? The liquid glass coating is a highly durable, flexible, super smooth, breathable and Super Phobic coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated surface. Most significantly, almost all treated surfaces can be cleaned with water alone. This means that in most instances environmentally damaging cleaning chemicals are not needed. When is the surface sufficiently coated? After applying the coating to the surface ensure that the whole of the surface is coated by working across the area. work quickly and in in a methodical manner. Over application results in a visble deposit which can be buffed off.

How do I clean brushed stainless steel? Brushed stainless steel is often used for oven hoods, oven hobs and microwaves. During the manufacturing process a thin oily deposit is often left in place. Thorough cleaning is required in order to remove this coating. A micro-fibre cloth and a suitable detergent can be used prior to deep cleaning with the LIQUIGLAS® cleaning wipe.

Does the coating prevent the appearance of finger prints? The LIQUIGLAS® coatings will not prevent finger prints from appearing on a surface but the finger prints are easily removed with a micro-fibre and warm water.

Do I need to wipe the surface with a dry cloth after cleaning? To attain an “as good as new” appearance it is advisable wipe the surface with a dry cloth as this will remove water marks.

Should I use a scourer to clean coated surfaces? Scouring agents and scouring pads will remove the coating.

Should I use warm water or cold water to clean the surface? Cold water can be used but warm water will enhance the removal of fats and cooking deposits. It is advisable to let the water soften baked on cooking deposits before cleaning the surface.

Is the coating suitable for all aluminium and stainless steel? It is important to note that occasionally aluminium is coated with a lacquer and so bonding to such surfaces may be less efficient (the LIQUIGLAS® Plastic, art. no. 447 should be used for these surfaces). Some stainless steel is highly polished. Optimal bonding to such surfaces can also be difficult to attain.

StainleSS Steel / aluminium Protection

Suitable for coating stainless steel and aluminium in most environments.

Are surfaces coated with LIQUIGLAS® self cleaning? No, we offer“easy clean” technology. LIQUIGLAS® has non-stick characteristics; similar to pans which are coated with non stick coatings. How long will the protection last? Every environment is different as some living spaces encounter heavy usage whilst others encoun-ter far less “wear and tear.” The treatments are all very durable and they will last for many months or even years. we expect the hard surface coatings to last for at least 6 months in domestic environments. The beading effect has disappeared or become weaker - why? Either the coating has worn away after prolonged use or the surface needs to be cleaned in order to re expose the surface. wiping with pre cleaner or an alcohol cleaner will also rejuvenate the coating. Can the treatments be re applied? Re application follows the format used during the initial application process; simply make sure that the surface is completely clean , dry and free of contaminants such as washing powder residue, or detergents. Please read the section relating to “application”. Are the LIQUIGLAS® coatings “food safe”? All of our coatings have been tested by independent agencies and are food safe. Are the LIQUIGLAS® coatings Dermatologically tested? All of our products are subjected to dermatological testing. Are the LIQUIGLAS® coatings heat tolerant? Liquid glass is stable between -150°C and +450°C. Can I apply LIQUIGLAS® to any surface? Liquid Glass bonds to most surfaces via quantum forces. The coatings can’t be applied to oily woods, hybrid stone mixtures or non stick surfaces. There are no glues, resins or other chemicals within this product.

Are LIQUIGLAS® products environmentally friendly? Our technology is recognised as being of great significance in the battle to protect our planet. The technology has won several awards from leading “environmental” agencies. It should be remembered that in most instances treated surfaces can be cleaned with water alone this means that a vast amount of POPs (Persistent Organic Pollutants) such as detergents can be withdrawn from sale.

Please share your experience with the team at LIQUIGLAS®. If you have tested a new application and found it good, we may publish it on our website. we will be pleased to forward a sample items of a new QLG coating to any person who has their comments published on our web page. For more information, visit www.liqui-glas.comcontents:

3 pre-cleaning wipes 100 x 140mm3 treatment wipes 100 x 140mm (2 m² per wipe)

450

470

420

WOOD PROTECTION

WWW.LIQUI-GLAS.COM

LIQUIGLAS®

Wood For protecting natural wood against moisture, mould, soiling abrasion, and bacteria. Ideal for use on Saunas, doors, art works, garden furniture, tables, toys and much more. LIQUIGLAS® Wood is a water based coating which provides an undetectable, flexible and breathable glass coating which can be applied in seconds to clean stable wooden surfaces. It can be applied to moist wood but it is not suitable for oily wood such as teak.

Application: Spray LIQUIGLAS® Wood on to the surface from a distance of approximately 25cm. To achieve optimal preservation of wood, conduct 2-3 spraying passes (wet on wet). Ensure that the whole surface is fully moistened. The coated item can be handled when the surface is dry. Full curing takes approximately 24hrs at an ambient temperature of 20°C.

NOTE: Please note that some wood will continue to dry and or swell even after the application of the coating. The manufacturer accepts no liability for any deformation or adverse performance characteristics of the coated wood. The coating is heat tolerant (tolerant to temperatures in the rage -150 to +450°C) but it is important to note that the underlying wood may react to hot items which are placed on the surface.

Keep out of reach of children. Do not spray into eyes. Do not drink. If swallowed, seek medical advice immediately and show this container and label. Do not inhale atomized spray. Please use content within 6 months of opening.

Coverage: Up to 10m², depending onthe surface area and absorbency of the wood.






LIQUIGLAS® coats these “mountains” with pure, nano scale particle free glass, which is 500 times thinner than a human hair. The newly coated surface is super-phobic and so rejects soiling agents. Amazingly

this coating is breathable, flexible yet super durable. The coating is environmentally friendly as it is created from quartz sand. Additionally the coatings can be cleaned with water which reduces the use of harmful chemicals.Your clean-ing costs are also reduced!

weatherproof easy application Hydrophobic (water

repellent) dirt and moisture

repellant food safe environmentally neutral breathable and flexible physiologically neutral highly durable undetectable reduces use of cleaning



multi award winning technology Made in Germany

ADVAN

CED


A.L.G.T.®

STONE PROTECTION

WWW.LIQUI-GLAS.COM

LIQUIGLAS® Stone provides an invisible breathable glass layer which protects against staining and weathering. Ideal for natural-stone, concrete, grout, bricks, terracotta, clay tiles etc.LIQUIGLAS® Stone is ready to use and can be sprayed directly on to the surface.Coverage: Up to 10 m2, depending on the porosity and surface area of the stone.Application: The surface must be completely clean and stable. The application is very simple. Spray the surface from a distance of approximately 25 cm ensuring that the surface is evenly moistened. (2 to 3 passes ensuring “wet on wet” coverage is recommended.) If pooling occurs simply wipe the surface to disperse the liquid. The coating becomes fully cured after 24hrs; when the ambient temperature is approximately 20°C. Warm air drying can be used. The coating can be used lightly when the surface is touch dry. The coating can be applied to moist stone. Do not apply when the temperature is going to drop below 5°C within the next 24hrs. The coating is highly durable but abrasion will occur on floors or contact areas.To re apply to these areas-Thoroughly clean the surface and then re apply. If necessary wipe over the re treated area to disperse any liquid which beads on the surface. Cleaning the coated surface. In most instances the surface can be cleaned with warm water and a soft brush. Low pressure power washers (max 60 bar) can be used. For glazed tiles please use LIQUIGLAS®

Glass and Ceramic.Keep out of the reach of children. Do not drink the liquid. If swallowed, seek medical advice immediately and show this container and label. Do not spray directly on to skin or in the eyes. Do not inhale. Use the contents within 6 months of opening. Protect the bottled liquid from frost.






LIQUIGLAS® coats these “mountains” with pure, nano scale particle free glass, which is 500 times thinner than a human hair. The newly coated surface is super-phobic and so rejects soiling agents. Amazingly this coating is

breathable, flexible yet super durable. The coat-ing is environmentally friendly as it is created from quartz sand. Additionally the coatings can be cleaned with water which reduces the use of harmful chemicals.Your cleaning costs are also reduced!


repellant food safe environmentally neutral breathable and flexible physiologically neutral highly durable undetectable temperature resistant

-150°C to +450°C reduces use of cleaning




Made in Germany

ADVAN

CED


A.L.G.T.®

430

WWW.LIQUI-GLAS.COM

OVEN / BARBECUE PROTECTION

Ideal for use on oven, grill and baking tin surfaces.

Contents:2 pre-cleaning wipes 160 x 220 mm2 treatment wipes 160 x 220 mm

(1 wipe is sufficient for 2 baking sheets or for the interior surfaces of the oven)

Welcome to the world of SiO2 Liquid Glass, nano layering technology. The product which you have before you offers truly stunning characteristics. Frequently asked questions:So what does Nano mean?A nanometer is a unit of measurement.1nm (nanometer) is one billionth of a metre. The name “Nano” comes from the Greek “Nanos” which means dwarf. Does our liquid glass contain any potentially harmful “nano” particles?No. Our coatings are recognised as being particle free. Our technology is based on molecular SiO2, which is created via an adaptation of the Sol-Gel process.Why can´t you see our treatment?Our thinnest coatings are approximately 100nm thick. This means that they are ap-proximately 500 times thinner than the a human hair and you need to use an electron microscope to see the coatings.So what exactly does the product contain?This truly amazing product contains pure, particle free, SiO2 (Silicon Dioxide) which means that it contains “pure glass”. The glass is in a molecular form and is held in a liquid; it does not become “glass” until it is allowed to dry. The glass in windows is not pure!So how does the nano coating work and what are the benefi ts?The liquid glass coating is a highly durable, fl exible, super smooth, breathable and Super Phobic coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated surface as each fi lament of every fi bre is protected with a nano scale layer of glass. Most signifi cantly, almost all treated surfaces can be cleaned with water alone. This means that in most instances environmentally damaging cleaning chemicals are not needed.When is the surface suffi ciently coated?After applying the coating to the surface ensure that the whole of the surface is coated by working across the area.Work quickly and in in a methodical manner. Over application results in a visble deposit which can be buffed off. Can I apply LIQUIGLAS® to my micro-wave?The coating can be applied to microwave surfaces.Can I use the oven treatment on Ceran hobs?Yes, but LIQUIGLAS® Glass and Ceramics (art. no. 401 & 405) offers the best bond to Ceran surfaces.If I treat my baking tray will particles of the liquid transfer into my food?The coating conforms to food safety regulations EU-VO 1935 / 2004Can I treat my deep fryer?The coating can be used but the unit should be cleaned after use.Can the coating be used on self cleaning ovens?Some self cleaning ovens work at temperatures which exceed the 450°C working temperature of LIQUIGLAS®.Please check manufacturers instructions. Most ovens have a maximum working temperature of approximately 300°C.Do I need to clean the oven on a regular basis?When possible you are advised to clean the oven after use as this will prevent build up and “bake-on” of cooking spills. This will make cleaning quicker and easier.

How do I clean my oven?In most instances you can use warm water and a microfi bre to clean the oven.The surface may need to be wiped over several times to moisten the food deposits.Non abrasive cleaning products can be used to assist with the removal of very stubborn baked on fat deposits.Should I use scouring pads?The use of scouring pads will dramatically reduce the life of the coating.Are surfaces coated with LIQUIGLAS® self cleaning?No, we offer “easy clean” technology. LIQUIGLAS® has non-stick characteristics; similar to pans which are coated with non stick coatings.How long will the protection last?Every environment is different as some living spaces encounter heavy usage whilst others encounter far less “wear and tear.” The treatments are all very durable and they will last for many months or even years. We expect the hard surface coatings to last for at least 6 months in domestic environments.The beading effect has disappeared or become weaker - why?Either the coating has worn away after prolonged use or the surface needs to be cleaned in order to re expose the surface. Wiping with pre cleaner or an alcohol cleaner will also rejuvenate the coating.Are the LIQUIGLAS® coatings “food safe”?All of our coatings have been tested by independent agencies and are food safe.Are the LIQUIGLAS® coatings dermatologically tested?All of our products are subjected to dermatological testing.Are the LIQUIGLAS® coatings heat tolerant?Liquid glass is stable between -150°C and +450°C.Can I apply LIQUIGLAS® to any surface? Liquid Glass bonds to most surfaces via quantum forces. The coatings can’t be applied to oily woods, hybrid stone mixtures or non stick surfaces. There are no glues, resins or other chemicals within this product.Are LIQUIGLAS® products environmentally friendly?Our technology is recognised as being of great signifi cance in the battle to protect our planet.The technology has won several awards from leading “environmental” agencies.It should be remembered that in most instances treated surfaces can be cleaned with water alone this means that a vast amount of POPs (Persistent Organic Pollutants) such as detergents can be withdrawn from sale.Can calcium deposits be removed more easily from a surface coated with LIQUIGLAS®?Laboratory tests show that calcium deposits can be removed from a coated glass plate with one fi fth of the energy normally needed to remove scale from an uncoated sample. Warm water should be applied to the deposits before wiping them off.

Please share your experience with the team at LIQUIGLAS®. If you have tested a new appli-cation and found it good, we may publish it on our website. We will be pleased to forward a sample items of a new QLG coating to any person who has their comments published on our web page. For more information, visit www.liqui-glas.com

6

Was bedeutet eigentlich Nano?Nano ist eine Maßeinheit. 1nm (Nanometer) ist ein millionstel Millimeter. Der Name Nano kommt aus dem Griechischen und bedeutet Zwerg.

Enthalten die Flüssigkeiten Partikel, deren Auswirkungen auf den Körper noch nicht vollständig erforscht sind? Nein, wir erzeugen unsere ultradünnen SiO2 (=Glas) Schichten durch einen „nass-chemischen“ Prozess, den man auch „Sol-Gel-Prozess“ nennt.

Warum kann man die Beschichtung nicht sehen? Unsere dünnsten Beschichtungen sind ungefähr 100nm (Nanometer) dünn, also ca. 500 x dünner als ein menschliches Haar, liegen unter dem Wellenbereich des Lichts und werden deshalb nicht wahrgenommen.

Woraus besteht das Flüssigglas-Produkt also genau?Dieses wirklich erstaunliche Produkt enthält reines partikel-freies SiO2 (Silizium-Dioxid), also „reines Glas“, das in der Flüssigkeit enthalten ist. Es wird so lange nicht zu Glas, bis es nach dem Aufsprühen trocknen kann. Selbst eine Glasscheibe ist kein so reines Glas wie dieses Produkt!

Was sind die Eigenschaften und Vorteile der Flüssigglas-Beschichtung?Die Flüssigglas-Beschichtung ist sehr langlebig, fl exibel, atmungsaktiv und macht die Oberfl äche sehr glatt. Sie ist „super phobic“, das heißt wirksam gegen Wasser und Öl. Trockener Schmutz haftet nicht und Flüssigkeiten wie z.B. Rotwein oder Kaffee können etwa bei Textilien nicht in die Faser eindringen. Das Wichtigste ist aber, dass veredelte Oberfl ächen nur noch mit Wasser gereinigt werden können und keine chemischen Reiniger mehr benötigen, die zum großen Teil schädlich für unsere Umwelt sind.

Wann ist die Oberfl äche ausreichend benetzt?Nach Aufbringen der Beschichtungslösung und gleichmäßigem Verreiben mit einem sauberen Tuch erkennt man ein Zusammenziehen der Beschichtungslösung auf der Oberfl äche. Dies ist ein Anzeichen dafür, dass die Oberfl äche ausreichend benetzt ist.

Was ist zu tun, wenn es bei der Beschichtung zu Fleckenbildung kommt?Frische Flecken entfernt man mit einem Tuch. Bereits eingetrocknete Flecken können mit einem feuchten Tuch entfernt werden. Bei vorschriftsmäßiger Beschichtung wie in der Anwendung beschrieben können keine Flecken entstehen.

Ist die LiquiGlas® Veredlung selbstreinigend?Nein, denn es gibt keine selbstreinigenden Oberfl ächen. Die LiquiGlas® Veredelung besitzt eine Antihafteigenschaft, wodurch Flüssigkeiten abperlen. Dadurch fällt weniger Schmutz an, der außerdem leichter entfernt werden kann. Dies erfolgt nach einem ähnlichen Prinzip, wie man es von Tefl on® Pfannen kennt.

Wie lange ist die Veredelung haltbar?Die Veredelung ist sehr lange haltbar, je nach Oberfl äche und Beanspruchung viele Monate oder sogar Jahre.

Der Abperleffekt ist verschwunden bzw. schwächer geworden - was ist zu tun?Die Oberfl äche ist verschmutzt. In diesem Falle einfach die Fläche mit einem alkoholischen Reiniger reinigen, der Abperleffekt ist wieder vorhanden.

So what does Nano mean?A nanometer is a unit of measurement.1nm (nanometer) is one billionth of a metre.The name comes from the Greek „Nanos“ which means dwarf.

Does our liquid glass contain any potentially harmful “nano” particles? No. Our coatings are recognised as being particle free. Our technology is based on molecular SiO2, which is created via an adaptation of the „Sol-Gel process“

Why can‘t you see our treatment?Our thinnest coatings are approximately 100nm thick. This means thatthey are approximately 500 times thinner than a human hair; and youneed to use an electron microscope to see the coatings.


So how does the nano coating work and what are the benefi ts?The liquid glass coating is a highly durable, fl exible, super smooth, breathable and super phobic coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated surface and liquids such as red wine or coffee, are unable to penetrate the coating on fabrics as each fi lament of every fi bre is protected with a nano scale layer of glass. Most signifi cantly, almost all treated surfaces can be cleaned with water alone. This means that in most instances environmentally damaging cleaning chemicals are not needed.

When is the surface suffi ciently coated?After applying the coating to the surface ensure that the whole of the surface is coated by working across the area.Work quickly and in a methodical manner. Over application results in a visble deposit which can be buffed off.

Can I remove spills and staining?Liquid spills can be removed from coated fabrics by mopping with a dry tissue. Already dried stains can be removed by sponging with a damp cloth.

Are surfaces coated with LiquiGlas® self cleaning?No, because at the moment self cleaning technology is not effi cient, if it truly exists. We offer „easy clean“ technology. LiquiGlas® has a non-stick characteristics. This is similar to items coated with Tefl on®.

How long will the protection last?Every environment is different as some living spaces encounter heavy usage whilst others encounter far less “wear and tear.” The treatments are all very durable and they will last for many months or even years. We expect the hard surface coatings to last for at least 6 months in domestic environments.

The beading effect has disappeared or become weaker - why?Either the coating has worn away after prolonged use or the surface needs to be cleaned in order to re expose the surface. Wiping with pre- cleaner or an alcohol cleaner will also rejuvenate the coating.

HÄUFIG GESTELLTE FRAGEN / FAQS

7

Was ist zu tun, wenn die Beschichtung tatsächlich beschädigt wurde?Beschädigte Stellen können problemlos repariert werden, indem sie erneut mit der LiquiGlas® Veredelung behandelt werden wie in der Anwendung beschrieben.

Sind die LiquiGlas® Produkte lebensmittelecht?Ja. Alle unsere Produkte sind daraufhin von unabhängigen Laboren getestet.

Sind die LiquiGlas® Produkte hitzebeständig?Ja, von -25°C bis 300°C.

Kann ich die LiquiGlas® Produkte auf allen Oberfl ächen anwenden, für die sie gedacht sind?Ja. Flüssigglas verbindet sich mit den Oberfl ächen als stabiler Oberfl ächenschutz. Es enthält keinen Kleber, Harze oder sonstige chemische Inhaltsstoffe.

Sind die LiquiGlas® Produkte umweltfreundlich?Ja. Unsere Technologie ist weltweit anerkannt als bedeutend im Kampf zum Erhalt der Erde und die SiO² Technologie hat bereits bereits mehrere Umweltpreise internationaler Umweltorganisationen gewonnen. Ein Aspekt ist dabei, dass veredelte Oberfl ächen nur noch mit reinem Wasser gereinigt werden können und damit weniger chemische Reiniger Anwendung fi nden und die Umwelt dadurch erheblich entlastet wird.

Can the treatments be reapplied?Reapplication follows the format used during the initial application process; simply make sure that the surface is completely clean, dry and free of contaminants such as washing powder residue or detergents.

Are the LiquiGlas® coatings “food safe”? All of our coatings have been tested by independent agencies and are food safe.

Are the LiquiGlas® coatings heat tolerant?Liquid glass is stable between temperatures in the range -25°C to +300°C.

Can I apply LiquiGlas® to any surface?Liquid glass bonds to most surfaces via quantum forces. The coatings can‘t be applied to oily woods, hybrid stone mixtures or non stick surfaces. There are no glues, resins or other chemicals within this product.

Are LiquiGlas® products environmentally friendly?Our technology is recognised as being of great signifi cance in the battleto protect our planet. SiO² technology has won several awards fromleading “environmental” agencies. It should be remembered that in mostinstances treated surfaces can be cleaned with water alone this meansthat a vast amount of POPs (Persistent Organic Pollutants) such as detergents will no longer damage the eco system.

CCM GmbH Creative Chemical ManufacturersDiepenbroich 8· D-51491 OverathFon +49 (0) 2206 / 938590-0· Fax +49 (0) 2206 / 938590-99www.liqui-glas.com· [email protected]

LiquiGlas® schützt unsere Welt. – LiquiGlas® protecting our world.

Liquid Glass - Made in Germany

FLÜSSIGGLAS-VERSIEGELUNG FÜR HAUSHALT UND AUTO … · on upholstery, mattresses, suits, car...

Documents

Transcript of FLÜSSIGGLAS-VERSIEGELUNG FÜR HAUSHALT UND AUTO … · on upholstery, mattresses, suits, car...