HALL 23B, BOOTH 206 - Fraunhofer · fraunhofer-gesellschaft zur fÖrderung der angewandten...
2
FRAUNHOFER-GESELLSCHAFT ZUR FÖRDERUNG DER ANGEWANDTEN FORSCHUNG MORE THAN RAIL INNOTRANS 2016 - HALL 23B, BOOTH 206 Fraunhofer Institute for Open Communication Systems FOKUS Quality Assurance of Railway Systems Fraunhofer FOKUS provides engineering and consulting for the development, quality assurance and certification of software- intensive railway systems. In order to assure the safety and security of railway systems, the system quality must meet the highest standards–from analysing requirement and certification to operation. To reach these objectives, Fraunhofer FOKUS advises its customers on the selection and introduction of modern technologies, such as, • Model-based development • Test automation • Formal methods • Domain specific languages Contact: Dr. Jens Gerlach Phone: +49 30 3463-7458 Mail: [email protected] www.fokus.fraunhofer.de/en Fraunhofer Institute for Factory Operation and Automation IFF Optical Test and Inspection Systems for Vehicle Manufacturing and Maintenance The Fraunhofer IFF provides technologies and systems solutions that optically scan the geometry of train wheelsets fully automatically for high product quality and efficient manufacturing and maintenance operations. The Fraunhofer IFF additionally provides intuitive, visual assistance systems and flexible optical assembly inspection sys- tems for manual assembly and maintenance operations. Interconnected Systems for Flexible, Quality-Driven Manufacturing Operations The Fraunhofer IFF provides technologies and methods that link and analyze digital process and quality data in order to generate value added that takes the Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM Training & Certification/DIN 6701 and DIN 2304 Fraunhofer IFAM offers internationally recognized certifying training courses in adhesive bonding technology and fiber composite technology. Fraunhofer IFAM is also Certification Body according to DIN 6701. Service: Certification according of the use of adhesive bonding in rail industry (DIN 6701) as well as in industry and craft (DIN 2304). Contact: Prof. Dr. Andreas Groß Phone: +49 421 2246-402 Mail: [email protected] www.ifam.fraunhofer.de/en.html © Marco2811 / Fotolia.com
Transcript of HALL 23B, BOOTH 206 - Fraunhofer · fraunhofer-gesellschaft zur fÖrderung der angewandten...
-
F R A U N H O F E R - G E S E L L S C H A F T Z U R F Ö R D E R U N G D E R A N G E W A N D T E N F O R S C H U N G
21
MORE THAN RAILINNOTRANS 2016 - HALL 23B, BOOTH 206
Fraunhofer Institute for Open
Communication Systems FOKUS
Quality Assurance of Railway Systems
Fraunhofer FOKUS provides engineering
and consulting for the development, quality
assurance and certification of software-
intensive railway systems. In order to assure
the safety and security of railway systems,
the system quality must meet the highest
standards–from analysing requirement and
certification to operation.
To reach these objectives, Fraunhofer
FOKUS advises its customers on the
selection and introduction of modern
technologies, such as,
• Model-based development
• Test automation
• Formal methods
• Domain specific languages
Contact:
Dr. Jens Gerlach
Phone: +49 30 3463-7458
Mail: [email protected]
www.fokus.fraunhofer.de/en
Fraunhofer Institute for Factory
Operation and Automation IFF
Optical Test and Inspection Systems
for Vehicle Manufacturing and
Maintenance
The Fraunhofer IFF provides technologies
and systems solutions that optically scan
the geometry of train wheelsets fully
automatically for high product quality and
efficient manufacturing and maintenance
operations. The Fraunhofer IFF additionally
provides intuitive, visual assistance systems
and flexible optical assembly inspection sys-
tems for manual assembly and maintenance
operations.
Interconnected Systems for Flexible,
Quality-Driven Manufacturing
Operations
The Fraunhofer IFF provides technologies
and methods that link and analyze
digital process and quality data in order to
generate value added that takes the
Fraunhofer Institute for Manufacturing
Technology and Advanced Materials
IFAM
Training & Certification/DIN 6701 and
DIN 2304
Fraunhofer IFAM offers internationally
recognized certifying training courses in
adhesive bonding technology and fiber
composite technology. Fraunhofer IFAM
is also Certification Body according to DIN
6701. Service: Certification according of
the use of adhesive bonding in rail industry
(DIN 6701) as well as in industry and craft
(DIN 2304).
Contact:
Prof. Dr. Andreas Groß
Phone: +49 421 2246-402
Mail: [email protected]
www.ifam.fraunhofer.de/en.html
© Marco2811 / Fotolia.com
-
1 2
form of predictive process analyses,
self-optimizing process control and quality-
driven manufacturing.
Contact:
Dr.-Ing. Dirk Berndt
Phone: +49 391 4090-224
Mail: [email protected]
www.iff.fraunhofer.de/en.html
Fraunhofer Institute for Physical
Measurement Techniques IPM
CIS: One Contact Wire Inspection
System for everything
The Contact Wire Inspection System CIS
records both, the vertical and horizontal
position of up to ten contact wires
simultaneously and their degree of wear.
The system works contactless at a speed of
up to 350 km/h. The system is mounted on
the roof of an inspection car. The position
recording is based on the laser scanning
principle and the residual thickness
recording is camera-based. Thanks to an
independent lighting unit, the Contact
Wire Inspection System CIS operates
reliably – without influences of daylight or
weather conditions.
Contact:
PD Dr. Alexander Reiterer
Phone +49 761 8857 – 183
Mail: [email protected]
www.ipm.fraunhofer.de/en/
Fraunhofer Institute for Transportation
and Infrastructure Systems IVI /
Fraunhofer Institute for Material and
Beam Technology IWS
Efficient railcar body layout and
production
Material savings, flexible production and
user comfort are becoming more important
on light rail body segments. Optimization
can be achieved on the basis of passenger
flow analysis and simulation for interior
design. Light weight production of side wall
segments with individual door cuttings can
be carried out through low-distortion laser-
welded and fully joined integral structures.
Contact:
Richard Kratzing
Phone: +49 351-4640-639
Mail: [email protected]
www.ivi.fraunhofer.de/
Dr.-Ing. Axel Jahn
Phone: +49 351 83391-3237
Mail: [email protected]
www.iws.fraunhofer.de/
Fraunhofer Institute for Nondestructive
Testing IZFP
Automated thermographic inspection
system for railway wheels
Many industrial branches, such as railway
engineering and automotive industry,
require safety-related components – e.g.
components of brakes and steering,
or entire railway wheels – to undergo
a hundred percent inspection during
the manufacturing process to exclude
surface cracks. Engineers and scientists
of Fraunhofer IZFP have developed an
automated thermographic inspection
system for railway wheels which enables
the detection of surface cracks without
surface treatment.
Contact:
Sabine Poitevin-Burbes
Phone: +49 681 9302-3869
Mail: sabine.poitevin-burbes@izfp.
fraunhofer.de
www.izfp.fraunhofer.de/en.html
Fraunhofer Institute for Structural
Durability and System Reliability LBF
Wheelset monitoring with Energy-
Harvesting-Sensors
Energy-autonomous sensor systems for
monitoring of freight cars are a technical
novelty. Such systems make use of
mechanical vibrations occurring on a freight
car in service in order to generate electrical
energy. The development of a low-power
and particularly robust system presents a
special challenge. Scientists at Fraunhofer
LBF are developing a methodical approach
to the design of such energy-autonomous
monitoring systems. The researchers
determine operating conditions in transit,
characterize energy sources and develop
specific algorithms for the different loading
conditions during goods transport. The
new energy-autonomous systems support
eco-friendly and safe rail transport.
Contact:
Michael Koch
Phone: +49 6151 705-413
Mail: [email protected]
www.lbf.fraunhofer.de/en.html
Fair coordination:
Fraunhofer Transport Alliance
Christiane Kraas
Phone: +49 231 9743-371
Mail: [email protected]
www.verkehr.fraunhofer.de
© Marco2811 / Fotolia.com © Ralf Gosch / Fotolia.com © figurniysergey / Fotolia.com
