Technologie für die Edelstähle und Sonderwerkstoffe STAHL · Once correct adjusted – that means...
1
STAHL Werkzeug- und Maschinenbau Edelstähle und Sonderwerkstoffe Technologie für die Glasindustrie Geschäftsführer Andreas Fremerey Amtsgericht Gelsenkirchen HRB 13019 USt-IdNr. DE121643493 Internet www.rurex.de e-Mail [email protected] RUREX-STAHL Dr. Otto Kukla GmbH Üchtingstraße 19; Halle A3 D-45881 Gelsenkirchen Telefon +49(0)209 85600 Telefax +49(0)209 1655731 Bankverbindungen Commerzbank AG, Erkrath IBAN DE36 3008 0000 0695 0000 00 SWIFT.-BIC: DRES DE FF300 Postbank Köln IBAN DE88 3701 0050 0016 5605 09 SWIFT.-BIC: PBNKDEFF Operating instructions For RUREX-shear blades Dear valued customer! You have purchased a precision tool for cutting glass. The only shearblade with a „build-in“ cutting pressure! Please follow carefully these instructions, in order to get a good performance of the RUREX blades. Contrary to all competition shear blades, the RUREX-blades act in the cutting process like a spring with a hardened cutting part. Additionally, all blades are marked with their cutting height in mm`s. Please assemble on one holder only blades with nearly the same cutting height. Once correct adjusted – that means the tips of the blade have contact- the necessary overtension for cutting the gobs is „build-in“, due to the flexibility of the blades. No further adjustement of the tension is necessary during the cutting process! Therefore RUREX blades have the best performance on high speed IS-machines and on parallel shear mechanism. It is important, that your feeder men are instructed and informed. If RUREX blades are treated like competition blades – that means the pressure on the blades will be increased by your staff every shift – the blades will be worn down quickly and cause damage to the blades and the whole cutting and shear mechanism! If you pay attention to these hints, you will have best results and long life of the RUREX Shearblades.
Transcript of Technologie für die Edelstähle und Sonderwerkstoffe STAHL · Once correct adjusted – that means...
STAHLWerkzeug- und MaschinenbauEdelstähle und Sonderwerkstoffe
Technologie für dieGlasindustrie
Geschäftsführer Andreas FremereyAmtsgericht Gelsenkirchen HRB 13019USt-IdNr. DE121643493Internet www.rurex.dee-Mail [email protected]
RUREX-STAHLDr. Otto Kukla GmbHÜchtingstraße 19; Halle A3D-45881 GelsenkirchenTelefon +49(0)209 85600Telefax +49(0)209 1655731
BankverbindungenCommerzbank AG, ErkrathIBAN DE36 3008 0000 0695 0000 00 SWIFT.-BIC: DRES DE FF300
Postbank KölnIBAN DE88 3701 0050 0016 5605 09SWIFT.-BIC: PBNKDEFF
Operating instructions For RUREX-shear blades
Dear valued customer!
You have purchased a precision tool for cutting glass. The only shearblade with a „build-in“ cutting pressure!
Please follow carefully these instructions, in order to get a good performance of the RUREX blades.
Contrary to all competition shear blades, the RUREX-blades act in the cutting process like a spring with a hardened cutting part.
Additionally, all blades are marked with their cutting height in mm`s.Please assemble on one holder only blades with nearly the same cutting height.
Once correct adjusted – that means the tips of the blade have contact- the necessary overtension for cutting the gobs is „build-in“, due to the flexibility of the blades.
No further adjustement of the tension is necessary during the cutting process!
Therefore RUREX blades have the best performance on high speed IS-machines and on parallel shear mechanism.
It is important, that your feeder men are instructed and informed.
If RUREX blades are treated like competition blades – that means the pressure on the blades will be increased by your staff every shift – the blades will be worn down quickly and cause damage to the blades and the whole cutting and shear mechanism!
If you pay attention to these hints, you will have best results and long life of the RUREX Shearblades.
