User Manual-C32227T2 S2 CP6(A4黑白印刷,封面157g铜版 … · The unit will automatically...
Transcript of User Manual-C32227T2 S2 CP6(A4黑白印刷,封面157g铜版 … · The unit will automatically...
íî� ÔÛÜ ÌÊ
C32227T2 S2 CP6
Contents
Unpacking the TV / Accessory’sInstalling / Removing the Base Stand
Front / Right Side View and ControlsRear View and Sockets
OSD Menu 1
Installing Batteries in the Remote Control
. Picture Setting 2. Sound Setting 3. Channel Setting 4. Lock Setting
Maintenance
12
First Time Installation 3
45
11-22121314-1819-2021
2325
262625
2727-28spiTdnastniH29sedoMyalpsiD30snoitacificepS31sgninraWytefaS
Remote Control
Making Video and Audio Connections
6-78
Remote Control Operation Range 8
9Connecting an AV Device with an HDMI Cable 9Turning the TV on for the First Time 10
5. Time Setting
Connecting a USB Storage DeviceViewing PhotosListening to MusicWatching MoviesViewing Texts
6. Option Setting 22
The parts
Installation
2
Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.
Screws(M5 x 8 4PCS) (ST4 x 12 4PCS)Stand feet & Screws
1.Place the stand in position as shown,fix it with the supplied screws (4x(ST4X12))
M5 x 8
4
8 POWER SWITCH Power Switch.
DTV, Satellite, ATV, AV, YPbPr,PC,HDMI1,HDMI2,USB.
5
9
1 2 3 4 56
7
8
ç
è
í
ì
ë
ê
é
Ø»¿¼°¸±²» ±«¬ ̱ ½±²²»½¬ ¬± ¬¸» »¿®°¸±²»ò
ÊÙß ñ ÐÝ ßËÜ×Ñ ×Ò Ì± ½±²²»½¬ ¬± ¿ ½±³°«¬»® ±® ±¬¸»® ¼»ª·½» ©·¬¸ ¿ ÊÙß ·²¬»®º¿½»ò
Ó·²· ÇоЮ ̱ ½±²²»½¬ ¬± ¿ÜÊÜ °´¿§»®ôÜ·¹·¬¿´ Í»¬ó̱°óÞ±¨ô±® ±¬¸»® ¼»ª·½» ©·¬¸ ½±³°±²»²¬øÇоЮ÷
ª·¼»± ¿²¼ ¿«¼·± ±«¬°«¬ ±½µ»¬ò
Ó·²· ßÊ Ì± ½±²²»½¬ ¬± ¿ÜÊÜ °´¿§»®ôÜ·¹·¬¿´ Í»¬ó̱°óÞ±¨ô±® ±¬¸»® ¼»ª·½» ©·¬¸ ½±³°±·¬»øßÊ÷
ª·¼»± ¿²¼ ¿«¼·± ±«¬°«¬ ±½µ»¬ò
ïð
ïï
ïî ËÍÞ Ð¸±²» ݸ¿®¹» Ñ«¬°«¬ ëÊ ïß º±® °¸±²» ½¸¿®¹»ò
ï ïîÊ Ô×ÙØÌÍøî¨ïÉ¿¬¬÷ î ÔÛÜ ´·¹¸¬
î ÍÑÔßÎ ÐßÒÛÔ ïéóïçÊ Ì± ½±²²»½¬ ¬± °±©»® «°°´§
Ô·¹¸¬ ͱ½µ»¬
ïîÊØÜÓ×ï ØÜÓ×î ÊÙß
ͱ´¿® п²»´
ïéóïçÊ
5
10
11
12
Ò±¬»æ
̸» ·²¼·½¿¬±® ´·¹¸¬ «²¼»® ¬¸» Ý× · ±² ¼«®·²¹
©¸»² ¬¸» ¾¿¬¬»®§ · º«´´ò
λ³±¬» ݱ²¬®±´
6
TOKEN
Extend battery life,picture will be dimmer.Press to see current mode and hold for 5 seconds to change mode.
λ³±¬» ݱ²¬®±´
7
TOKENÌÛÈÌæ
Switch between TVand Teletext mode.*
ÌÑÕÛÒæ
Recall the Paygo system page.*
ÍËÞæ
DVD and DTV mode only.*
8
TOKEN
9
Ô·¹¸¬ ͱ½µ»¬
ïîÊØÜÓ×ï ØÜÓ×î ÊÙß
ͱ´¿® п²»´
ïéóïçÊ
5. If this is the first time you are turning on the TV and there are no programs in the TV memory, the menu will appear on the screen. There are 4 setups as follow:
10
aerial and the rear bottom of your TV.Connect the end of the RF coaxial cable of the
Switch on with power switch.
Always switch off at power switch when not in use for a long period of time.
battery.
and on the remote button.
SMART ANTENNA
Do not switch on with power switch until you have completed all the connections.
Power Switch
Light Sockets12V HDMI1 HDMI2 VGASolar Panel
17-19VCommon Interface
TV USBMedia
USB PhoneCharge PC
AudioMini AV
MiniYPbPr
Sat Dish
17
DTV, Satellite, ATV, AV, YPbPr,PC,HDMI1,HDMI2,USB.
LOCK
ÑÕ
ÑÕ
ÑÕ
ÑÕ
ײº±
Ó«¬» Ó«¬»
/
11
Input SourceDTV
SatelliteATVAV
USB
OKOK
YPbPrPC
HDMI1HDMI2
PICTURE
Picture Mode StandardContrast 50
50Brightness 50Saturation 50Tint 50Sharpness
Color Temperature NormalAspect Ratio AutoNoise Reduction Middle
Enter OK Enter Select Exit Exit
Saturation Press the buttons to increase or decreases the saturation.
Auto
ÑÕ
ÑÕ
Normal
Normal
Sports
SPDIF Mode
Auto Volume This feature automatically adjusts the audio level when the TV is turned on.This function is activated by selecting”Off”.
Surround Sound Turn on/off the surround sound function by selecting “Surround” or “Off”.
SOUND
Sound Mode Standard120Hz 50500Hz 501.5KHz 505KHz 5010KHz 50Balance 0Auto Volume OffSurround Sound OffSPDIF Mode Auto
Enter OK Enter Select Exit Exit
ÑÕ
ͱ«²¼
ÑÕ
ÑÕ
ß²¬»²²¿
1. Press the Ó»²« button and then press the buttons to select the ÝØßÒÒÛÔ menu.
2. Press the and then p
buttonsand then press the to selectthe following channel options ress the button.
Allows you to set up a variety of channel options.
Auto Tuning1.Press the buttons to Auto Tuning then press the ÑÕ button to confirm.
2.In the
Smart Antenna
For the smart antenna to work, 5V antenna power must be set to ON.If you have no channels check this.
Auto Tuing menu there are 2 options for you to selet from:Tune Type and Country.
3.Press the Menu button to return back to the main menu.
4.Press the Exit button to exit the menu.
CHANNEL
Auto TuningDVB-T Manual TuingATV Manual TuingProgramme EditSignal InformationCI Information5V antenna power OffLCN OffSoftware Update(USB)
Enter OK Enter Select Exit Exit
ÜÌÊ
ÑÕ
ÑÕ
Portugal
Rumania
Russian Spain UK
Slovenia Switzerland
Serbia Sweden
Tune Type DTV + ATV
Enter Adjust MENU Return
DVB-T Mannual Tuning
1.Select DVB-T Mannual Tuning,press the ÑÕ button to confirm.
Storage To 1 Press the buttons to change the numbered location of the found channel.
ATV Mannual Tuning
ATV Mannual Tuning
NTSC.
ÜÌÊ
ÑÕ
ÑÕ
Ú®»¯«»²½§ ˲®»¹·¬»®»¼
ÜÌÊ
ÜÌÊ
Programme EditUse up/down keys to select program edit.Press ÑÕ to enter the menu.
Delete
Press the RED button to delete the highlighted channel,a red circle will appear next to the cahnnel name.
Press the RED button again to confirm delete.
Press the MENU to return to the main menu.
Move
Press up/down to select the cahnnel,press yellow button to enter the move mode,then press up/down to move the channel location,press yellow button again or press ÑÕ to confirm.
Press MENU to return to the main menu.
Skip
Press up/down to select the channel you wish to skip.
press the BLUE button,a logo will appear next to the channel name and the channel will be skipped when youscroll through the channels.
Press the BLUE button again on the highlighted channel to disable the skip function.Press MENU to returnto the main menu.
Signal Information
Only available in DTV mode.
CI Information
When insert CI Module,display CI Information.
Software Update(USB)
1.Download the software to the usb device,then insert the usb device to the unit.2.Press the menu button to select the CHANNEL menu.3.Press the left/right buttons to select Software Update(USB) and then press the ÑÕ button to update software.4.When the updating is completed,the unit will be reset to standby mode.
ÜÌÊ
Lock Setting
Lock
Lock SystemLock System
Set Password: If you had already changed the password,enter the current password.
Block Program: This feature is available only for digital TV and the tuned-in channel must support it.
Key Lock:Press the buttons to select the “Key Lock” option and then press to choose between the options ON or OFF.After selecting ON,the front panel buttons TV/AV/ Menu/CH+/CH-/VOL+/VOL- of the device will be locked.
LOCK
Lock System OffSet Password
Block Program
Parental Guidance OffKey Lock OffHotel Mode
Enter OK Enter Select Exit Exit
ÑÕ
ÑÕ
ÑÕ
ÑÕ
Lock Setting
Lock System
Press the up/down buttons to select the “Lock System”
Press the up/down buttons to select the “Parental Guidance” option and than press the right button to choosebetween ON and OFF.
option and than press the right button to choose between ON and OFF.
Hotel Mode
Press the up/down buttons to select the “Hotel Mode” option.
Set Password
Press the up/down buttons to select the “Set Password”option and then press ÑÕ to enable the menu.
Block Program
Parental Guidance
Press up/down buttons to select the “Block Program”.
Key Lock
Press up/down buttons to select the “Key Lock ”.
LOCK
Lock System OffSet Password
Block Program Parental Guidance OffKey Lock OffHotel Mode
Enter OK Enter Select Exit Exit
21
Time Setting
Time
Clock
Press the ÑÕ button to set date and time.
Off Time
Press the ÑÕ button to set off time.
On Time
Press the ÑÕ button to set on time.
Sleep Timer
The sleep timer automatically switches the TV to standby after the preset time has elapsed.The clockwill be set automatically when receiving a digital signal.Time must be set before using Sleep Timer function.
Press up/down buttons to select a period of time after which the TV automatically switches to standby mode:OFF/10/20/.../180/240 min and then press the ÑÕ button to confirm.The timer begains to count down from the number of minutes selected.
Auto Standby
The unit will automatically switch to standby mode 3/4/5/Off hours after the last time the remote control was used.A reminder screen will pop up and count down before the unit switches to standby mode.If you want to operate the TV for a long period of time,tun off the auto standby function by selecting Off.
Time Zone
When you select a Time Zone city,the TV time is set by the time off set information based on Time Zone andGMT which is received with the broadcast signal and the time is set automatically by a digital signal.Press the up/down/left/right buttons to select the desired time zone city and then press the ÑÕ button toconfirm.(DTV mode)
OSD Timer
Press up/down buttons to select the display time of the on-screen menu:5s/10s/15s/20s/25s/30s/Off and then press the ÑÕ button to confirm.
TIME
Clock 01/Jan 01:08Off Time Off
On Time Off
Sleep Timer OffAuto Standby 4HTime Zone London GMT
OSD Timer 15 S
Enter OK Enter Select Exit Exit
ÑÕ
ÑÕ
Option Setting
Option
OSD Language
Allows you to select the on screen display menu language.
Audio Languages
Select the audio languages.The availability of this function depends on the tuned-in channel.(can only beselected in DTV mode)
Subtitle Language
Select the subtitle language.The availability of this function depends on the tuned-in channel.(can only beselected in DTV mode)
Hearing Impaired
Allows you to show more information in subtitles for the hearing-impaired in some programmes(can only beselected in DTV mode)
PVR File System
Reset
Restores all settings to the factory defaults.
First Time Installation
This option allows you to reset the TV to the default factory setting.Once activated the TV will go to standby mode.
Power Save
Allow you to select among:DAYTIME/4Hrs(4-6Hrs)/6Hrs(6-10Hrs)
Blue Screen
Press left/right buttons to select ON or OFF
Smart Power
Automatically select DAYTIME during daylight hours and 4Hrs/6Hrs at night.
ÑÕ
ÑÕOPTION
OSD Language EnglishAudio Languages EnglishSubtitle Language EnglishHearing Impaired OffPVR File SystemReset
Smart Power On
Power SAVE DaytimeBlue Screen Off
Enter Enter Select ExitOK Exit
First Time Installation
23
ÐÑÉÛÎ
ËÍÞ
ݱ³³±² ײ¬»®º¿½»
ÌÊ
ËÍÞÓ»¼·¿
ËÍÞ Ð¸±²»Ý¸¿®¹»
ÐÝß«¼·±
Ó·²· ßÊ
Ó·²·ÇоЮ
Í¿¬ Ü·¸
Multimedia Operation
Basic Operation
1.Press the SOURCE button on tje remote control to display the input source menu,select the USB source with the up/down buttons and press the ÑÕ button to enter the Multimedia menu below.
2.Press left/right buttons to select the files on the USB device(PHOTO,MUSIC,MOVIE,TEXT)to view or play.
Return to main menu
Preview
File Information
Press the up/down/left/right buttons to select and the ÑÕ button to activate the file or open folder.Pressbutton to play the files in full screen mode.When in full screen mode press the ÑÕ button to show the navigation option menu on the bottom of the screen or press stop button to return to files.
24
Input SourceDTV
SatelliteATVAV
USB
OKOK
YPbPrPC
HDMI1HDMI2
1.PhotoPhoto viewing
Press left/right buttons to select the option on themenu,and press the ÑÕ button to activate.
Repeat: Select the repeat mode from Repeat All, Repeat One,Repeat None.
Music: Play/Pause the background music of your choice.Playlist: Display the playlist on the screen and select the photo of your choice.
Info: Display the information of the file.
Rotate: Rotate the photo clockwise/counterclockwise.
Zoom In/Out: Zoom In/Out of your photos.
Move view: Move the photo in Zoom out mode.
2.MusicListen to music
Press left/right buttons to select the option on themenu,and press the ÑÕ button to activate.
Play: Play the music.
FB: Retreat quickly.
FF: Fast forward.
Prev./Next: Go to a song/Turn to the next song.
Stop: Stop playing.
Repeat: Select the repeat mode from Repeat All, Repeat One,Repeat None.
Play List: Display the playlist on the screen.
Info.: Display the information of the music file.
Play: Play the photo.
Prev./Next: Go to on a picture/Go to the next picture.
Stop: Stop auto turning pages.
3.MovieWatch a film
Press left/right buttons to select the option on themenu,and press the ÑÕ button to activate.
Play: Play the movie.
FB: Retreat quickly.
FF: Fast forward.
Prev./Next: Go to a video/Turn to the next video.
Stop: Stop playing.
Repeat: Select the repeat mode from Repeat All, Repeat One,Repeat None.
Aspect Ratio: Select the aspect ratio of the on screen display.
Move View: Moves the enlarged picture area.
4.TextView text files
Press left/right buttons to select the option on themenu,and press the ÑÕ button to activate.
Prev/Next page: Turn to previous/next page of the text.
Prev./Next: Turn to previous/next file.
Stop: Stop auto turning pages.
Music: Play/pause the background music of your choice.
Playlist: Display the playlist on the screen.
Info: Display the information of the text file.
ïñïîè
27
ͱ´¿® °¿²»´ò
̸» ¾¿¬¬»®§ ³¿§ ¾» ¼·½¸¿®¹»¼ ¿²¼ ³¿µ» «®» ¬¸» ±´¿®
°¿²»´ · ½±²²»½¬»¼ò
Í©·¬½¸ ±ºº ¿¬ ®»¿® º±® ¿ º»© ³·²«¬»ò
Í©·¬½¸ ±² ¿¹¿·²
Check that 5V antenna power is on in the Channel Menu.
29
30
32
1366 (H) x 768 (V) pixels
100 x 100 mm / M5 x 8
3000:1
730.2 x 94 x 430.7 mm
730.2 x 195.3 x 468.9 mm
5.15 kg
3W + 3W
Approx.80cm(31.5inch)
31
32
If your TV has a fault please call 0704500500