4084
Mas
chin
en-S
chra
ubst
öck
eM
ach
ine
vice
s
Maschinen-Schraubstöcke RS, SG, UH und UZRS, SG, UH and UZ machine vices
Preisgünstige Maschinen-Schraubstöckeaus Spezialguß für vielfältigen EinsatzState-of-the-art, low-cost machine vices made fromspecial cast metal for flexible application
21279-k004-084 24.02.2006 12:46 Uhr Seite 4084
Spannsysteme Maschinen-Schraubstöcke RS, SG, UH und UZ
Clamping systems
RS, SG, UH und UZSpannsystem mechanischMechanischer Antrieb, Betätigung derjeweiligen Gewindespindel mit derHandkurbel.
RS, SG, UH and UZmechanical clamping systemMechanical drive, activation of thespindle thread in each case with thehand crank.
RS:Vorteile:
Kraftübertragung mittelsGewindespindelGanzer Spannbereich durchDrehen mit der HandkurbelüberbrückbarSpindel schmutz- und späne-geschützt
RS:Advantages:
Force transmission via spindlethreadEntire clamping range withinreach by turning the hand crankSpindle protective against dirt andchips
SG:Vorteile:
Große SpannweiteEinfache Verstellung des Spann-bereichs durch Umstecken einesBolzensHohe Spannkraft durch kräftigdimensionierte, vergütete und mitWälzlager abgestützte SpindelSpindel schmutz- undspänegeschützt
SG:Advantages:
Wide clamping capacitySimple adjustments of theclamping range by moving a pinHigh clamping force due to aspaciously dimensioned,heat-treated and bearing-supported spindleSpindle protected against dirt andchips
UH:Vorteile:
UnterzugspannerHohe Spannkraft durch wälz-lagerabgestützte SpindelGanzer Spannbereich durchDrehen mit der HandkurbelüberbrückbarSpindel im Arbeitsbereichabgedeckt
UH:Advantages:
Draw-down-viceHigh clamping force due to abearing-supported spindleEntire clamping range withinreach by turning the hand crankSpindle covered in the workingarea
UZ (Zentrischspanner):Vorteile:
Zentrische Spannung durchLinks- und Rechtsgewinde derSpindelSpindel im Arbeitsbereichabgedeckt
UZ (self–centering vice):Advantages:
Centric clamping by right-handand left-hand threaded spindleSpindle covered in theoperating range
•
•
•
••
•
•
••
•
•
•
•
•
•
••
•
•
••
•
•
•
•
•
4085
Mas
chin
en-S
chra
ubst
öck
eM
ach
ine
vice
s
21279-k004-085 24.02.2006 12:46 Uhr Seite 4085
4086
Mas
chin
en-S
chra
ubst
öck
eM
ach
ine
vice
s
Maschinen-Schraubstöcke RS, SG, UH und UZStandardausführungen mit SGN-Backen und Handkurbel
RS, SG, UH and UZ machine vicesStandard models with SGN jaws and hand crank
Röhm UZ machine vices:Centric clamping for milling and planing of forms, slots and grooves of
all kinds. Concerning the centered clamping, various workpiece widths
have no effect on the central location of the workpiece
Low, sturdy design of special cast metal
Centric clamping by right-hand and left-hand threaded spindle
Spindle covered in the operating range
The side jaw guides enable simple and exact positioning of the vice
Swivel bases as universal type with ground contact edge for
supporting the vice
Hydraulically activated version upon request
Röhm RS machine vices:Long guidance of movable jaw
Swivel bases
in standard and universal design with ground contact edge for
supporting the vice
Röhm SG machine vices:Long guidance of movable jaw
Disposal of chips and coolant via a groove in the stationary clamping
jaw area
Swivel basis either in ordinary version with high edge as a water drain
groove or in standard and universal design with ground contact edge for
supporting the vice
Besondere Technische Merkmale
Röhm Maschinen-Schraubstöcke RS, SG, UH und UZ:Spannsystem: mechanisch
Modern konzipierte Baugruppen aus Spezialguß
Spannbacken SGN umkehrbar, eine Seite glatt, die andere gerillt
Umfangreiches, wechselbares Backensortiment
Einsatz auf Drehplatte mit Gradeinteilung
Diese Maschinen-Schraubstöcke sind besonders für den Einsatz
auf konventionellen Werkzeugmaschinen geeignet. Sie sind
problemlos im Einsatz und zuverlässig in der Funktion.
These machine vices are particulary suitable for application on
conventional machine tools. Their application is problem-free and
they function reliably.
Special technical features
Röhm RS, SG, UH and UZ machine vicesMechanical clamping system
Modern design with components made from special cast metal
SGN clamping jaws reversible, one side smooth, the other side grooved
Extensive, interchangeable assortment of jaws
Can be used on a rotation plate with graduation
Röhm Maschinen-Schraubstöcke RS:Lange Führung der beweglichen Backe
Drehplatten in Standard- und Universal-Ausführung mit
geschliffenem Auflagerand zur Abstützung des Schraubstockes
Röhm Maschinen-Schraubstöcke SG:
Lange Führung der beweglichen Backe
Späne und Kühlwasserabfluß durch Aussparung im Bereich der
festen Spannbacke
Drehplatte in Standard- und Universal-Ausführung mit
geschliffenem Auflagerand zur Abstützung des Schraubstockes
Röhm Maschinen-Schraubstöcke UH:Große Spannweite
Niedrige Bauart aus Spezialguß
Hohe Spannkraft durch wälzlagerabgestützte Spindel
Spindel im Arbeitsbereich abgedeckt
Nachstellbare Prismenführung
Drehplatten in Universalausführung mit geschliffenem
Auflagerand zur Abstützung des Schraubstockes
Schraubstock-Körper und Drehplatten sind zum genauen
Ausrichten mit Längsnuten versehen
Röhm UH machine vices:Wide clamping range
Low design made out of special cast metal
High clamping force through roller bearing supported spindle
Spindle covered in operating range
Adjustable V-jaw guidance
Swivel bases in ordinary and universal versions with high
contact edge for supporting the vice and as a water drain groove
Vice body and swivel bases are equipped with longitudinal
grooves for accurate alignment
Röhm Maschinen-Schraubstöcke UZ:Zentrisch-Spanner -- zum Fräsen und Hobeln von Formen, Schlitzen und
Nuten aller Art. Durch die zentrische Spannung sind unterschiedliche Werkstück-
breiten ohne Einfluß auf die Mittenlage des Werkstückes
Niedrige, kräftige Bauart aus Spezialguß
Zentrische Spannung durch Links- und Rechtsgewinde der Spindel
Die seitlichen Backenführungen ermöglichen ein einfaches und genaues
Ausrichten des Schraustockes
Drehplatten in Universal-Ausführung mit geschliffenem
Auflagerand zur Abstützung des Schraubstockes
Hydraulisch betätigte Ausführung auf Anfrage
21279-k004-086 24.02.2006 12:46 Uhr Seite 4086
4087
Mas
chin
en-S
chra
ubst
öck
eM
ach
ine
vice
s
Schraubstöcke RS, SG, UH und UZMachine vices
Ausführung
Design TypeWGTG
Liefer-umfang
Unit
Größe
Size
Backen-breite
Jaw width
Id.-Nr.
Maschinen-Schraubstock RS -- RS machine vice
RS1 92 128031
RSSpannsystem mechanisch manuell
2 113 128032Spannsystem mechanisch, manuellbetätigt mit Normalbacken SGN und Stück
3 135 128033p y
betätigt, mit Normalbacken SGN und
Handkurbel711 11
Stück
Piece4 160 128034
Handkurbel711 11
Piece5 200 111648
RS 6 — —RSMechanical clamping system, 7 — —Mechanical clamping system,
manually operated, with SGN normal
jaws and hand crank
Maschinen-Schraubstock SG -- SG machine vice
SG1 92 125284
SGSpannsystem mechanisch manuell
2 113 124521Spannsystem mechanisch, manuellbetätigt mit Normalbacken SGN und Stück
3 135 124536p y
betätigt, mit Normalbacken SGN und
Handkurbel705 11
Stück
Piece4 160 124925
Handkurbel705 11
Piece5 200 124941
SG 6 250 125122SGMechanical clamping system,Mechanical clamping system,
manually operated, with SGN normal
jaws and hand crank
Maschinen-Schraubstock UH -- UH machine vice
UH1 90 014516
UHSpannsystem mechanisch manuell
2 113 014542Spannsystem mechanisch, manuellbetätigt mit Normalbacken SGN und Stück
3 135 014565p y
betätigt, mit Normalbacken SGN und
Handkurbel721 11
Stück
Piece4 160 014590
Handkurbel721 11
Piece5 200 014612
UH 6 250 014635UHMechanical clamping system, 7 300 014655Mechanical clamping system,
manually operated, with SGN normal
jaws and hand crank
Maschinen-Schraubstock UZ -- UZ machine vice
UZ1 — —
UZSpannsystem mechanisch manuell
2 113 014523Spannsystem mechanisch, manuellbetätigt mit Normalbacken SGN und Stück
3 135 014740p y
betätigt, mit Normalbacken SGN und
Handkurbel725 11
Stück
Piece4 160 014752
Handkurbel725 11
Piece5 200 014802
UZ 6 250 014807UZMechanical clamping system, 7 — —Mechanical clamping system,
manually operated, with SGN normal
jaws and hand crank
Drehplatten -- Swivel basesId.-Nr. Id.-Nr.
Standard Drehplattefür RS / for RS für SG / for SG
Standard-DrehplatteGeschliffener Auflagerand Gradeinteilung 1 129814 129814Geschliffener Auflagerand, Gradeinteilung,
mit Bef.-Schrauben und Nutensteinen zur 740 37Stück 2 129814 082441mit Bef.-Schrauben und Nutensteinen zur
Befestigung des Schraubstockes auf der740 37
Stück
Piece 3 082442 082442Befestigung des Schraubstockes auf derDrehplatte
Piece
4 082443 082443Drehplatte
Standard swivel base 5--7 — —Standard swivel baseGround contact edge, graduation, withfixing bolts and T-slot nuts for fastening
the vice to the swivel base
Universal Drehplatte (RS/SG)für RS / for RS für SG / for SG
Universal-Drehplatte (RS/SG)Geschliffener Auflagerand Gradeinteilung Stück
1--4 — —Geschliffener Auflagerand, Gradeinteilung,
mit Bef.-Schrauben und Nutensteinen zur 744 37Stück
Piece5 090854 090854mit Bef.-Schrauben und Nutensteinen zur
Befestigung des Schraubstockes auf der
744 37Piece
6 — 090854Befestigung des Schraubstockes auf derDrehplatte 7 — a. Anfr. / on req.Drehplatte
Universal swivel base (RS/SG)Ground contact edge, graduation, withfixing screws and T-slot nuts for fastening
the vice on the swivel base
Universal-Drehplatte (UH/UZ)für UH / for UH für UZ / for UZ
Universal-Drehplatte (UH/UZ)Geschliffener Auflagerand, Gradeinteilung, 1 014706 —Geschliffener Auflagerand, Gradeinteilung,
mit T-Nutenschrauben und Muttern zur 2 014709 014709mit T-Nutenschrauben und Muttern zurBefestigung des Schraubstockes auf derD h l tt 722 37
Stück 3 014712 014712Befestigung des Schraubstockes auf derDrehplatte 722 37
Stück
Piece 4 014715 014715p
Universal swivel base (UH/UZ)
Piece
5 014718 014718Universal swivel base (UH/UZ)Ground contact edge, graduation, with 6 014721 014721Ground contact edge, graduation, withT-slot screws and nuts for mounting the
i th i l b7 014723 —s ot sc e s a d uts o mou t g t e
vice on the swivel base
Abmessungen siehe Seite 4092 / dimensions page 4092
21279-k004-087 24.02.2006 12:44 Uhr Seite 4087
Schraubstöcke RS, SG, UH und UZ
Machine vices
RS SG
Dmax.
H BY
J
Dmax.
H BY
J
Dmax.
B HY J
Dmax.
BYH
E
G
E
G
F
O
M 6
20H7
RSK
Q
P
b
c
d
A
a
F
O
M 6
20H7
RSK
Q
P
b
c
d
A
a
E
G
C
C C
E
G
C
M 6
Q
P
K
F
O
S R
UH
b
c
d
A
a
M 6
20H7
Q
P
K
F
O
S R
UZ
b
c
d
A
a
20H7
Mas
chin
en-S
chra
ubst
öck
eM
ach
ine
vice
s
4088
21279-k004-088 24.02.2006 12:44 Uhr Seite 4088
4089
Schraubstöcke RS, SG, UH und UZMachine vices
RS Typ/type 711 SG Typ/type 705
GrößeSize 1 2 3 4 5 1 2 3 4 5 6
BackenbreiteJaw width A 92 113 135 160 200 92 113 135 160 200 250
SpannweiteClamping range B 85 105 125 145 185 100 125 150 180 215 345
BackenhöheJaw height C 31,6 31,6 39,6 49,6 62,6 31,6 31,6 39,6 49,6 62,6 65
D 362 423 510 575 675 417 458 503 570 660 853E 80 90 104 120 145 91 96 107 124 145 169,5F 260 300 365 410 460 310 320 380 430 500 685G 48 58 64 70 82 59 64 67 74 82 104,5H 50 55 70 80 90 50 55 70 80 90 90J 174 200 242 273 322 158 172 186 214 262 292K 160 160 200 240 280 160 160 200 240 280 280O 115 125 155 175 200 115 125 155 175 200 230P 60 60 70 80 118 90 90 90 90 160 160Q 13 13 13 17 21 13 13 13 17 21 21R 14 14 14 18 22 13 13 13 17 21 21S 120 120 146 184,5 210 100 100 135 180 180 180Y 12 12 16 16 20 12 12 16 16 20 50
Backenanschlußmaße a 63 63 80 100 125 63 63 80 100 125 125BackenanschlußmaßeJaw mounting dimensions b 13,6 13,6 15,6 19,6 24,6 13,6 13,6 15,6 19,6 24,6 24,6Jaw mounting dimensions
c M6 M6 M8 M8 M10 M6 M6 M8 M8 M10 M10d 12 12 13 13 16 12 12 13 13 16 16
SpannkraftClamping force kN 18 25 35 45 55 20 25 35 45 55 60
Gewicht ca.Weight approx kg 12 13,5 25 40 65 13 17 24 35 67 94
UH Typ/type 721 UZ Typ/type 725
GrößeSize 1 2 3 4 5 6 7 2 3 4 5 6
BackenbreiteJaw width A 90 113 135 160 200 250 300 113 135 160 200 250
SpannweiteCalmping range B 90 110 140 180 250 300 400 110 140 180 300 400
BackenhöheJaw height C 24,6 31,6 39,6 49,6 62,6 62,6 79,6 31,6 39,6 49,6 62,6 62,6
D 283 337 393 465 570 676 792 358 408 495 655 767E 73,5 88 101,5 120 137 145 170 93,5 106 124,5 142,5 148,5F 263 314 367 436 539 641 754 344 394 480 640 751G 48 55,5 61 69,5 73,5 81,5 89,5 61 65,5 74 79 85H 119 142 154 180 202 251 251 81 87 107 123 123J 13 14 15 16 16 18 19 — — — — —K 107 132 152 180 200 220 280 132 152 180 200 220O 111 135 161,5 193 244,5 290 346,5 149 174 214 294 344P 40 50 60 60 70 80 120 50 60 60 70 80Q 9 11 11 17 17 17 17 11 11 17 17 17R 11 13 13 17 17 21 21 13 13 17 17 21S 82 101 118,5 142 158 175 208 101 118,5 142 158 175Y 12 12 16 16 20 20 25 12 16 16 20 20
Backenanschlußmaße a 46 63 80 100 125 160 200 63 80 100 125 160BackenanschlußmaßeJaw mounting dimensions b 11,6 13,6 15,6 19.6 24,6 24,6 31,6 13,6 15,6 19,6 24,6 24,6Jaw mounting dimensions
c M6 M6 M8 M8 M10 M10 M12 M6 M8 M8 M10 M10d 11 11 13 13 15 15 16 11 13 13 15 15
SpannkraftClampig force kN 20 25 35 40 50 60 70 15 22 24 25 28
Gewicht ca.Weight approx. kg 6,7 10,3 17,2 26,2 40,2 54 80 12,4 19 31 52 71
Mas
chin
en-S
chra
ubst
öck
eM
ach
ine
vice
s
21279-k004-089 24.02.2006 12:44 Uhr Seite 4089
2 113 150739
3 135 150740
Stück 4 160 150741
Piece 5 200 --
6 250 --
Zubehör für Maschinen-Schraubstöcke RS, SG, UH, UZ
Accessories for machine vices
Rollen-Niederzugbacken ENR
Für Werkstücke mit/ ohne Winkelfehlern,
gehärtet und geschliffen
ENR roller draw-down jaws
For workpieces with/without angle errors,
hardened and ground
Pendelbacke EPA
Für Werkstücke mit/ohne Winkel- und
Parallelitätsfehlern, gehärtet und geschliffen
EPA floating jaws
For workpieces with/without angle and
parallelism errors, hardened and ground
Liefer- Backen-
umfang Größe breite
Unit size Jaw width Id.-Nr. Id.-Nr.
Spannbacken zum Einhängen, passend für RS und SG -- Insertable clamping jaws, suitable for RS and SG
2 110 131676
3 135 131677
Satz 4 160 131678
Set 5 200 133106
6 250 --
7 315 --
Tiefziehbacke ETB
Für parallele, winklige oder flache Werkstücke,
gehärtet und geschliffen
ETB draw-down jaws
For parallel, angular of flat workpieces,
hardened and ground
2 110 133218
3 135 133222
Satz 4 160 133226
Set 5 200 133230
6 250 --
7 315 --
2 110 094134
3 135 094135
Satz 4 160 094136
Set 5 200 094137
6 250 --
7 315 --
Tiefziehbacke STB
Für parallele, winklige oder flache Werkstücke,
gehärtet und geschliffen
STB draw-down jaws
For parallel, angular of flat workpieces,
hardened and ground
Niederzugbacken SNF
Mit Federblatt, gehärtet und geschliffen
SNF draw-down jaws
With spring plate, hardened and ground
Spannbacken zum Anschrauben, passend für RS, SG, UH und UZ -- Bolt-on jaws, suitable for RS, SG, UH and UZ
2 113 134826
3 135 134830
Satz 4 160 134834
Set 5 200 134838
6 250 --
7 315 --
Pendelbacke SRP
Für Werkstücke mit/ ohne Winkel- und
Parallelitätsfehlern, gehärtet und geschliffen
SRP floating jaws
For workpieces with/without angle and
parallelism errors, hardened and ground
2 113 077097
3 135 077098
Satz 4 160 077099
Set 5 200 077100
6 250 --
7 315 --
1 90/92 -- 077103
2 113 077104 077104
3 135 077105 077105
Satz 4 160 077106 077106
Set 5 200 077107 077107
6 250 --
Normalbacke SGN
Eine Seite glatt, eine Seite gerillt,
gehärtet und geschliffen
SGN normal jaw
One side smooth, one side grooved,
hardened and ground
Prismen- und Normalbacke SBO*
Mit Werkstückauflage, weich und brüniert
SPR V-jaw and normal jaw
With work support, soft and gunmetalfinished
1 90/92 152752 152767
2 113 152753 152753
3 135 152754 152754
Stück 4 160 152755 152755
Piece 5 200 152759 152759
6 250* 152761 152760
7 300 152762
Prismenbacke SPR*
Gehärtet und geschliffen,
zur Kombination mit Normalbacke SGN
SPR V-jaw
Hardened and ground, for use in
combination with SGN normal jaw
1 90/92 128770 082361
2 113 082362 082362
Stück 3 135 082363 082363
Piece 4 160 082364 082364
5 200 082365 082365
6 250 137838 082366
1 --
Satz 2 113 317259
Set 3 135 317260
4 160 317261
5 200 --
Normalbacke SGNA
Mit versetzbarem Werkstückanschlag, eine Seite
glatt, eine Seite gerillt, gehärtet und geschliffen
SGNA normal jaw
With adjustable work locator, one side smooth,
one side grooved, hardened and ground
RS/SG UH/UZ
Werkzeug-Gruppe 37
tool group
* beide Seiten glatt geschliffen / both sides ground -- *Spannbereiche siehe Seite 4027/4028 / clamping ranges see page 4027 / 4028
Normalbacke SGN feingeriffelt,
zur Erhöhung der spezifischen Flächenpressung
(höhere Haltekräfte) umkehrbar, eine Seite
feingeriffelt, eine Seite längsgeriffelt
Standard jaw SGN fine corrugated for amplification of
the specific surface pressure (higher clamping forces)
reversible, one side fine corrugated, one side axially
knurled
1 90/92 163218 --
2 113 156195 156195
3 135 156196 156196
Stück 4 160 156197 156197
Piece 5 200 156198 156198
6 250 -- --
7 300 -- --
4090
Mas
chin
en-S
chra
ubst
öck
eM
ach
ine
vice
s
21279-k004-090 24.02.2006 12:45 Uhr Seite 4090
014823
014825
739 37 Satz 014827
Set 014829
014831
014833
2 14x125 009152
3 14x125 009152
7004 15 Stück 4 17x160 009153
Piece 5 19x200 009154
6 19x200 009154
740-02 37 Stück 2 -- 7 320401
Piece
Halter für Parallel-Unterlagen HPUL
Zum Klemmen an die Schraubstock-
Flachführung, besonders geeignet bei vertikalem
Einsatz des Schraubstockes.
HPUL support for parallel gauge blocks
For clamping on the jaw ways, particulary suitable
for vertical application of the vice.
AxBxC
2 100x80x24 150730
741-81 37 Satz 3 120x100x24 150731
Set 4 140x120x24 150732
H 16 150733
H 20 150734
741-80 37 Satz 2 -- 7 H 26 150735
Set H 32 150736
H 40 150737
H 50 150738
Handkurbel für RS Maschinen-Schraubstock
mit Innenachtkant
Hand crank for RS machine vice
With octagon socket
Zubehör für Maschinen-Schraubstöcke RS, SG, UH, UZ
Accessories for machine vices
Werkstückanschlag
Universell verstellbar, zum Befestigen auf dem
Maschinentisch (Anschlußgewinde M12, mit
Nutensteinen für 14er T-Nut)
Work locator
Universally adjustable, can be mounted on the
machine table (connection thread M12 with T-slot
nuts for 14 mm T-slot).
Parallel-Unterlagen PUL
Zum Einstecken in Halter für Parallel-Unterlagen HPUL,
gehärtet und geschliffen, Höhentoleranz: ¦0,005
PUL parallel gauge blocks
For inserting into the support for HPUL parallel gauge
blocks, hardened and ground, height tolerance: ¦0,005
Liefer- Innen-
Type WG umfang Größe achtkant x L Id.-Nr.
TG Unit size Inner Octagon x L
1 12x80 009150
2 14x125 009152
7004 15 Stück 3 17x160 009153
Piece 4 19x200 009154
5 19x200 009154
Lose Nutensteine
gehärtet und geschliffen
Loose T-slot nuts DIN 6323
hardened and ground
6404-Y 15 Stück 302142
Piece 302143
Feste Nutensteine
gehärtet und geschliffen.
Satz = 2 Stück einschließlich Befestigungsschrauben
Fixed T-slot nuts
hardened and ground. Set = 2 pieces
complete with mounting screws
20x12, L32xH14
20x14, L32xH14
20x12, L22
20x14, L25
20x16, L25
20x18, L25
20x20, L22
Handkurbel
mit Innenachtkant, für UZ serienmäßig
Hand crank
with octagon socket UZ as standard
Handkurbel für SG Maschinen-Schraubstock
mit Innenachtkant
Hand crank for SG machine vice
With octagon socket
1 12x80 009150
2 14x125 009152
7004 15 Stück 3 17x160 124550
Piece 4 19x200 124937
5 19x200 124937
6 24x250 009156
Handkurbel für UH Maschinen-Schraubstock
mit Innenachtkant
Hand crank for UH machine vice
With octagon socket
1 12x80 009150
2 14x125 009152
7004 15 Stück 3 17x160 009153
Piece 4 19x200 009154
5 19x200 009154
6 19x200 009156
7 24x315 009157
Gewinde/T-Nut
Thread/T-slot
740-90 37 Stück 2 -- 7 M10/12 681193
Piece M10/14 733573
M10/16 733574
Präzisions-Tischanschlag
Universell verstellbar, zum Befestigen auf dem
Maschinentisch (Anschlußgewinde M12,
Nutenstein nach DIN 508).
Work locator
Universally adjustable, can be mounted on the
machine table (connection thread M12,
T-slot nut DIN 508).
12-18h6 20h6
20h6
12-14h620h6
20x25, L32
C
B
A
L
H
10
150
Mas
chin
en-S
chra
ubst
öck
eM
ach
ine
vice
s
4091
21279-k004-091 24.02.2006 12:52 Uhr Seite 4091
Dre
hpla
tten
Sw
ivel
bas
es
Größe / size 1 2 3 4 5 6 7
A 210 245 295 345 450 450 495
B 91 113 133 154 173 192 240
C 22,5 25 27 30 30 30 34
D 11 11 13 17 17 17 21
Ø E 165 190 225 275 350 350 375
P M8 M10 M10 M16 M16 M16 M16
T 25o 20o 18o 15o 15o 15o 15o
U 25o 25o 48o 40o 45o 45o 40o
V g5 28 28 38 38 38 38 38
Gewicht ca. kg -- weight approx. kg 3,5 5 8 11,5 16,5 17,3 23
Größe / size 1 2 3 4 5
A 242 242 280 340 420
B 134,5 134,5 162 201 241
C 30 30 30 34 40
D 14 14 14 18 21
Ø E -- -- -- -- 346
P M12 M12 M12 M16 M20
T -- -- -- -- 20o
U -- -- -- -- 27,5o
V g5 28 28 28 28 28
Gewicht ca. kg -- weight approx. kg 7,5 7,5 11 18 23
für / for RS für / for SG für / for RB -- RH
1 129814 129814 --
2 129814 082441 082441
3 082442 082442 082442
4 082443 082443 082443
Drehplatten
Swivel basesStandard-Drehplatten für RB -- RH -- RS -- SG -- Standard swivel bases
Universal-Drehplatten für UH -- UZ -- Universal swivel bases
Standard-Drehplatte (RS/SG/RB/RH)Geschliffener Auflagerand, Gradein-teilung, mit Bef.-Schrauben undNutensteinen zur Befestigung des
Schraubstockes auf der Drehplatte
Standard swivel base(RS/SG/RB/RH)Ground contact edge, graduation,with fixing bolts and T-slot nuts for
fastening the vice to the swivel base
Universal-Drehplatte (RS/SG/RB/RH)Geschliffener Auflagerand, Gradein-teilung, mit Bef.-Schrauben undNutensteinen zur Befestigung des
Schraubstockes auf der Drehplatte
Universal swivel base(RS/SG/RB/RH)Ground contact edge, graduation,with fixing screws and T-slot nuts forfastening the vice on the swivel base
Universal-Drehplatte (UH/UZ)Geschliffener Auflagerand, Gradein-teilung, mit T-Nutenschrauben undMuttern zur Befestigung des
Schraubstockes auf der Drehplatte
Universal swivel base (UH/UZ)Ground contact edge, graduation,with T-slot screws and nuts formounting the vice on the swivelbase
Drehplatten -- Swivel basesGröße Id.-Nr. Id.-Nr. Id.-Nr.
Stück/piece Stück/piece Stück/piece
für / for RS für / for SG für / for RB -- RH
1-4 -- -- --
5 090854 090854 090854
6 -- 090854 a. Anfr. / on req.
7 -- -- a. Anfr. / on req.
für / for UH für / for UZ
1 014706 --
2 014709 014709
3 014712 014712
4 014715 014715
5 014718 014718
6 014721 014721
7 014723 014723
Werkzeug-Gruppe 37
tool group 37
C
AB V
20H7
P
Größe -- size 1-4 C
B VP
A
20H7
20H7C
P
V
Größe -- size 5
A
D D
B
D
U
T
ØE
D
ØE
U
T
D
Universal-Drehplatte für RB -- RH -- RS -- SG -- Universal swivel base
4092
21279-k004-092ohnePreise 01.03.2006 14:45 Uhr Seite 4092
Mas
chin
ensc
hrau
bst
ock
MS
RM
ach
ine
vice
passende Drehplatte
matching swivel base
Id.-Nr. 476867 476868 476868 476870
passend für Backenbreite -- suitable for jaw width 125 150 150 175
A 226 290 290 320
28 28 28
58 58 58
D 95 125 125 145
Maschinen-Schraubstock MSRaus legiertem Stahl, gehärtet und geschliffen, mit Niederzugbacken
Machine vice MSRmade of Tool alloy steel, hardened and ground, with keep-down jaws
Technische Merkmale:
Spannsystem mechanisch
Körper aus gehärtetem Stahl (60 HRC)
Spannwiederholgenauigkeit 0,02 mm
Lieferung komplett mit Spannschlüssel undWerkstückanschlag
passende Nutensteine siehe Zubehör Seite 4093
Technical features:
Mechanical clamping system
Hardened steel body (60 HRC)
Repeating accuracy 0,02 mm
Complete delivered with hand crank andWorkpart locator
matching T-slot nuts see page 4093
Für Fräsmaschinen,Bearbeitungszentren undStandard-Maschinen
For milling machines, machining
centres and standard machines
Backenbreite -- Jaw width A 125 150 150 175
Id.-Nr. 161828 161827 161826 161825
Backenhöhe -- Jaw height B 40 50 50 60
Backenlänge feste Backe -- Jaw length fix jaw C 78 90 90 97
Höhe Backeneinsatz -- Jaw insert height D 32 40 40
Köperlänge / max. Gesamtlänge -- Body length / max. overall length E 345 / ~401 420 / ~487 520 / ~587 655 / ~701
Breite des Körpers -- Body width F 95 125 125 145
Höhe des Körpers -- Body height G 40 50 50 58
Gesamthöhe -- Overall height H 80 100 100 118
Absteckbolzen/Absteckweite -- Connecting pin/Connecting range I 50 50 50 50
Spannweite -- Clamping range K 150 200 300 400
Max. Spannkraft ca. -- Max. clamping force kN 30 50 50 60
Gewicht ca. -- Weight approx. kg 12,7 25,6 29,5 51,2
Werkzeug-Gruppe 11
tool grou
Werkzeug-Gruppe 37
tool group
passend für T-Nut -- suitabel for T-slot 12 14 16 18
Id.-Nr. Stück/piece 163329 163330 163331 163332
Spannpratzen für Größe 125
clamps for size 125
passend für T-Nut -- suitabel for T-slot 12 14 16 18
Id.-Nr. Stück/piece 163333 163334 163335 163336
Spannpratzen für Größe 150 und 175
clamps for size 150 and 175
23
47
B
C
Werkzeug-Gruppe 37
tool group
G
FI
E
H
B
CA
K
D
4093
21279-k004-093 24.02.2006 12:54 Uhr Seite 4093
Mas
chin
en-S
chra
ubst
ock
MS
RM
ach
ine
vice
s
Sonderspannbacken für Maschinen-Schraubstock MSR
High precision NC vices: Special clamping jaws
Größe -- Size 125 150 175
Id.-Nr. Stück/Piece 1043226 1043228 1043230
Backenbreite/Jaw width A 120 146 171
Backenhöhe/Jaw heigth B 38 48 58
Backenlänge/Jaw length C 76 87,5 96
Stufenbacke für feste BackeStep jaw for fixed jaw
Werkzeug-Gruppe 37
tool group
Größe -- Size 125 150 175
Id.-Nr. Stück/Piece 1043227 1043229 1043231
Backenbreite/Jaw width A 120 146 171
Backenhöhe/Jaw heigth B 38 48 58
Backenlänge/Jaw length C 58 80 90
Stufenbacke für bewegliche BackeStep jaw for movable jaw
Größe -- Size 125 150 175
Id.-Nr. Stück/Piece 1043409 1043410 1043411
Backenbreite/Jaw width A 120 146 171
Backenhöhe/Jaw heigth B 38 48 58
Backenlänge/Jaw length C 58 78 90
Prismenbacke mit Spannstufe für bewegliche BackePrism jaw for movable jaw
Größe -- Size 125 150 175
Id.-Nr. Stück/Piece 1043412 1043413 1043414
Backenbreite/Jaw width A 120 146 171
Backenhöhe/Jaw heigth B 38 48 58
Backenlänge/Jaw length C 90 120 140
Winkelbacke für bewegliche Backe (für runde Teile)Inclinde jaw for movable jaw (for circular parts)
A
B
C
A
B
C
A
C
B
A
B
C
4094
21279-k004-094 24.02.2006 12:52 Uhr Seite 4094
Top Related