Post on 08-Aug-2018
8/22/2019 05.Repasair Hoist
1/18
05.2011
ST
125 - 6.300 kg
Kettenzge_
Produktinformation
Chain Hoists_ Product Information
Palans chane_ Informations sur le produit
8/22/2019 05.Repasair Hoist
2/18
ST.FM
Kettenzge STST Chain HoistsPalans chane ST
6 05.11
Typisch STAHL CraneSystems:Innovation, die aus Erfahrungkommt
Typical STAHL CraneSystems:Innovation out of experience
Typiquement STAHL Crane-Systems : Linnovation issuede lexprience
Kettenzge STDas neue Kettenzugprogramm STzhlt zu den profiliertesten undumfangreichsten, die heute welt-weit angeboten werden. JederKettenzug-Typ fr sich verfgtber individuell vorteilhafte Lei-stungsmerkmale. Allen gemein-sam ist die sprichwrtlicheKompetenz von STAHL Crane-Systems in der Frdertechnik.
berzeugende Vorteile aufdie Reihe gebracht - durch-gngig!
Sicherster Kettenzugdie Typen ST 10 - ST 60 habeneine patentierte Kettenfhrung,die aus massivem Gu gefertigtist. Die geschlossene Ketten-fhrung integriert die tragen-den Komponenten in einemBauteil, dadurch wird die Lastdort getragen, wo sie angreift -
die Aufhngung ist direkt, derKraftfluss geht nicht ber dasGehuse!
Einfachste Wartungdes Kettentriebes durch diefliegend gelagerte Antriebs-welle. Kettennuss, Kettenaus-werfer und Kettenfhrunglassen sich fr Inspektioneneinfach ein-und ausbauen.
Leichteste Prfungder Bremsen - keine Nachstel-lung erforderlich (ST 10-60).
Schnellste Verfgbarkeitdurch vorkonfektionierteKomponenten und modernsteFertigungssteuerung erreichenwir krzeste Lieferzeiten fr alleKettenzge der Baureihe ST.
Weitere Pluspunkte der neuenKettenzug-Generation ST:
+ komprimierte Baumae+ leistungsstarke Antriebstech-
nik nach Ma
+ viele Optionen verfgbar+ hoch verschleifeste Ketten inSondergte
+ abgerundetes Produktpro-gramm von 125 kg - 6300 kg
+ leichtgngige Fahrwerke+ kundenspezifische Lsungen
ST chain hoistsThe new ST chain hoistprogramme is one of the mostdistinctive and comprehensiveprogrammes on offer today world-wide. Each chain hoist model hasindividual advantages as regardsits performance characteristics;all share in STAHL CraneSystemslegendary material handling com-petence.
Convincing advantagescombined in series - hoist forhoist!
Extremely safe chain hoistThe ST 10 - ST 60 models have apatented chain guide made ofsolid cast metal. The enclosedchain guide integrates the load-bearing components into a sin-gle sub-assembly, thus the loadis supported where it is applied- suspension is direct, the
power flux not transmittedthrough the housing!
Extermely simple maintenanceof the chain drive thanks to theoverhung drive shaft. Chainsprocket, chain ejector andchain guide are easy todismantle and assemble forservicing.
Extremely easy inspectionof the brakes - no adjustmentnecessary (ST 10-60).
Extremely fast availabilityWe achieve the shortestdelivery times for all chainhoists of the ST series bymeans of pre-assembledcomponents and up-to-dateproduction control.
Further advantages of the newgeneration of ST chain hoists:
+ reduced dimensions+ powerful drive technology
made-to-measure
+ many options available+ extremely wear resistantchains in special quality
+ well-rounded product rangefrom 125 kg - 6300 kg
+ smooth-running trolleys+ customer specific solutions
Palans chane STLes palans chane du nouveauprogramme ST comptent parmi lesplus professionnels et les mieuxquips proposs aujourdhui surle march. Chaque type de palan chane dispose de caractri-stiques propres et particulire-ment intressantes. Ils ont tous encommun le savoirfaire reconnu deSTAHL CraneSystems dans ledomaine de la manutention.
Des avantages dcisifs surtoute la ligne!
Palan chane extrmementfiableLes types ST 10 - ST 60 ont un
guide-chane brevet fabriqu en
fonte massive. Le guide-chane
ferm intgre les composants
porteurs dans un sous-ensemble ;
il en rsulte que la charge estsupporte la o elle agit - La sus-
pension est directe, le flux deforce ne passe pas par le carter!
Entretien extrmement simplede l'entranement de la chanedu fait que l'arbre d'entrane-ment est en porte--faux. Noixd'entranement, jecteur dechane et guide-chane sontfaciles poser et dposerpour des inspections.
Contrle trs faciledes freins - Pas ncessaire derattraper le jeu (ST 10-60).
Disponibilit trs rapideGrce des composants prpa-rs et au pilotage trs modernede la production, nous atteignonsdes dlais de livraison extrme-ment courts pour tous les palans chane de la srie ST.
Autres atouts de la nouvellegnration de palans chane ST:+ Construction de forme ramasse+ Puissante technique d'entrane-
ment sur mesure+ Beaucoup d'options disponibles
+ Chanes extrmement rsistan-tes l'usure, en qualit spciale+ Programme bien toff de pro-
duits, de 125 kg 6300 kg+ Chariots manuvrant facile-
ment+ Solutions spcifiques du client
8/22/2019 05.Repasair Hoist
3/18
ST.FM
Kettenzge STST Chain Hoists
Palans chane ST
705.11
Die neuen ST Kettenzge imberblick
The new ST chain hoists at aglance
Les nouveaux palans chaneST en un coup d'il
1 Bremse2 Motor3 Aufhngung4 Rutschkupplung5 Getriebe6 Kettenfhrung7 Kettennuss8 Steuerung9 Hakengeschirr/Hakenflasche10 Kettenspeicher
1 Brake
2 Motor3 Suspension4 Slipping clutch5 Gear6 Chaine guide7 Chain sprocket8 Control /terminal box9 Bottom hook block10 Chain box
1 Frein2 Moteur3 Suspension4 Limiteur de couple5 Rducteur6 Guide chane7 Noix de chane8 Coffret de commande9 Moufle10 Bac chane
ST 05
ST 10 - ST 60
Die Kettenzge ST 05 bis ST 60 bilden ein neues Profi-Programmfr Hebezeuge im Tragfhigkeitsbereich von 125 bis 6300 kg.
Sie zeichnen sich durch Merkmale aus, die fr den Anwenderentscheidende Gebrauchsvorteile ergeben.Es ist ein Programm, wie es von einem Pionier der Frdertechnikerwartet wird.
The chain hoists ST 05 to ST 60 form a new programme ofprofessional hoists in a working load range from 125 to 6300 kg.They are distinguished by characteristics offering decisive advan-tages in use.It is a programme such as is only to be expected from a pioneerin material handling.
Les palans chane ST 05 ST 60 constituent un nouveau programmeprofessionnel de palans dans la gamme des charges dutilisation de125 6300 kg.Ils se distinguent par des caractristiques qui procurent l'utilisateurdes avantages d'usage dcisifs.C'est un programme tel que vous attendiez d'un pionnier de lamanutention.
8/22/2019 05.Repasair Hoist
4/18
ST.FM
Kettenzge STST Chain HoistsPalans chane ST
8 05.11
Die neuen ST Kettenzge imberblick
The new ST chain hoists at aglance
Les nouveaux palans chaneST en un coup d'il
Die Kettenzge ST sind voraus-sichtlich ab 01.10.2011 auch mit
BG-Zulassung verfgbar
Massive, hochfeste Kettenfh-rung, (6) die den Kettentrieb vollumschliet, sorgt auch bei rau-hen Anwendungsbe-dingungen fr einen funktions-sicheren Lauf der Kette
Hohe Hubgeschwindigkeiten,kraftvoller Hubmotor (2); 1 oder2 Hubgeschwindigkeiten (1:4)
Wartungsarme, asbestfreieelektromagnetische Scheiben-bremse (1) bei ST 10-ST 60, beiST 05 Verschiebeanker-Brems-motor (Konusbremse).Hohe Lebensdauer - sicherauch bei Tippbetrieb
Rutschkupplung (4) - einfacheinstellbar von auen. PrzisesAnsprechen und geringer Sto-faktor durch Einbau in der 2.
Getriebestufe Bis 2000 kg (ST 2010-8..) wahl-
weise Direkt- oder Schtz-steuerung, darber standard-mig Schtzsteuerung mitHauptschtz, Steuerspannung48 V
Bedienerfreundliches, ergono-misch gestaltetes Steuergert
Extrem kurze Bauhhe beisenaufhngung, starrer Auf-hngung und beim Fahrwerk
Starre Aufhngung ergibt gn-stige Bauhhe beim Einbau inAnlagen und verhindert das"Schwingen" des Kettenzugesam Fahrwerk
Verschleifeste, einsatzgehr-tete Kettennuss (7)
2 Fahrgeschwindigkeiten (1:4)ermglichen exaktes Positio-nieren der Last
Einfache elektrische Montagedurch Steckverbindungen
Stndiges Erfassen der Betriebs-stunden durch einen Betriebs-stundenzhler als Option
From 01.10.2011 the chain hoistST are expected to be available
with approveal from theEmployers' Liability InsuranceAssociation
Solid, high-tensile chain guide(6) enclosing chain drive com-pletely, ensures that chain runsreliably even in harsh operatingconditions
Fast hoisting speeds, powerfulmotor (2); 1 or 2 hoisting speeds(1:4)
Low-maintenance, asbestos-free electromagnetic discbrake (1) on ST 10-ST 60,sliding rotor brake motor(conical brake) on ST 05.Long service life - safe even ininching operation
Slipping clutch (4) easily adju-sted from outside. Accuratereaction and low impact factordue to integration into 2nd gear
step Up to 2000 kg (ST 2010-8..)
optionally direct or contactorcontrol, above this capacity asstandard equipment contactorcontrol with main contactor,control voltage 48 V
Easy handling with ergonomiccontrol pendant
Extremely short headroomswhether with eye suspension,rigid suspension or trolley
Rigid suspension permits lowheadroom for installation insystems and prevents chainhoist swinging on trolley
Wear-resistant, case-harde-ned chain sprocket (7)
2 travel speeds (1:4) permitaccurate positioning of the load
Simple electrical installation bymeans of plug connections
Constant recording of operatinghours by means of optionaloperating hours counter
Il est prvu qu partir du01.10.2011 les palans chane ST
sont aussi disponibles avec auto-risation de la BG (caisse de pr-voyance des accidents du travail)
Guide-chane massif (6) et
haute rsistance, enfermant com-
pltement l'entranement de
chane et garantissant une mar-
che fiable de la chane aussi dansles conditions d'opration dures
Grandes vitesses de levage,moteur puissant (2); 1 ou 2vitesses de levage (1:4)
Pour ST 10-ST 60, frein lectro-magntique disque (1), la gar-niture sans amiante, ncessitantpeu d'entretien, pour ST 05moteur-frein rotor coulissant(rotor conique). Longue dure devie - scurit aussi en cas debrefs enclenchements du moteur
Limiteur de couple friction (4) -rglage ais de l'extrieur.Raction prcise et facteur dechoc faible grce la situation
au deuxime tage du rducteur
Jusqu' 2000 kg (ST 2010-8..)commande directe ou com-mande t.b.t., pour les capacitsplus hautes comme quipementstandard commande t.b.t. aveccontacteur gnral, tension decommande 48 V
Pilotage facile grce sa botede commande ergonomique
Hauteur perdue trs faible soit enexcution fixe illet, soit avecsuspension rigide ou sur chariot
Une suspension rigide permetune hauteur perdue trs faiblepour le montage dans les instal-lations et prvient le balance-ment du palan dans le chariot
Noix de chane rsistante l'usure, cmente et trempe (7)
2 vitesses de direction (1:4) per-mettent un positionnementexact de la charge
Installation lectrique aisegrce aux fiches de connection
Saisie permanente des heuresd'utilisation par le compteur detemps d'utilisation en option
Eine moderne Fertigungstechnikund Materialwirtschaft garantie-ren kurze Lieferzeiten undLiefertreue.
Modern manufacturingtechnology and materialsmanagement guarantee shortdelivery times and reliabledelivery dates.
Une technique de production etune gestion des matriauxmoderne assorties cettenouvelle ralisation garantissentde courts dlais et le respect desspcifications de commande.
8/22/2019 05.Repasair Hoist
5/18
ST.FM
Kettenzge STST Chain Hoists
Palans chane ST
905.11
Standardprogramm
Standard Programme
Programme standard
Auswahltabelle Selection table Tableau de slectionStandardprogramm Standard programme Programme standard
FEM
(ISO)
TypType
Motorleistung
Output(motor)
Puissancedumoteur
Einschaltdauer
Dutycycle
Facteurdemarche
Schaltungen/Stunde
Operations/hour
Dmarrages/heure
Hubmotor/Hoistmotor
Moteurdelevage
C
06
0
Stationr
Stationary
Fixeaccroch
Rollfahrwerk
Pushtrolley
Chariotdedirection
parpousse
normaleBauhhe
standardheadroom
hauteurperduenormale
kurzeBauhhe
shortheadroom
hauteurperduerduite
50 Hz 60 Hz 50 Hz 60 Hz 50/60 Hz 50/60 Hz Typ[kg] [m/min] [kW] [kW] [%ED] [c/h] Type
125 3m(M6)2m
(M5)
88/216
16/4
1010/2,5
2020/5
ST 0501-8ST 0501-8/2ST 0501-16ST 0501-16/4
1/11/11/11/1
0,20,2/0,05
0,40,4/0,1
0,240,24/0,06
0,480,48/0,12
4035/15
4035/15
240180/360
240120/240
A04 18
18
10
10
24
24
16
16
42
42
19 34
34
25
25
250 1Am(M4) 88/2 1010/2,5 ST 0502-8ST 0502-8/2 1/11/10,4
0,4/0,10,48
0,48/0,1240
35/15240
120/240A04 18 10 24 16 42 19 34 25
320 1Bm(M3)
66/1,5
77/1,7
ST 0503-6ST 0503-6/1,5
1/11/1
0,40,4/0,1
0,480,48/0,12
4035/15
240120/240
A04 18 10 24 16 42 19 34 25
500 1Am(M4)
44/18
8/212
12/3
4,84,8/1,2
1010/2,5
1414/3,6
ST 0502-8ST 0502-8/2ST 1005-8ST 1005-8/2ST 1005-12ST 1005-12/3
2/12/11/11/11/11/1
0,40,4/0,1
0,80,8/0,2
1,21,2/0,3
0,480,48/0,12
0,960,96/0,24
1,41,4/0,36
4035/15
6040/20
6040/20
240120/240
360120/240
360120/240
A04
E21
E22
18
38
38
10
11
11
26
46
46
16
17
17
42
59
59
19
20
20
36
61
61
25
26
26
630 1Bm(M3)
3,23,2/0,75
3,53,5/0,85
ST 0503-6ST 0503-6/1,5
2/12/1
0,40,4/0,1
0,480,48/0,12
4035/15
240120/240
A04 18 10 26 16 42 19 - -
1000 1Am(M4)
2m(M5)1Am(M4)
44/16
6/1,5
88/212
12/3
4,84,8/1,2
7,27,2/1,8
1010/2,514
14/3,6
ST 1005-8ST 1005-8/2ST 1005-12ST 1005-12/3
ST 2010-8ST 2010-8/2ST 2010-12ST 2010-12/3
2/12/12/12/1
1/11/11/11/1
0,80,8/0,2
1,21,2/0,3
1,51,5/0,372,3
2,3/0,57
0,960,96/0,24
1,41,4/0,36
1,81,8/0,442,8
2,8/0,68
6040/20
6040/20
6040/2060
40/20
360120/240
360120/240
360120/240360
120/240
E21
E22
E31
E32
41
41
7272
11
11
1212
53
53
8484
17
17
1818
62
62
8888
20
20
2121
64
64
104104
26
26
2727
1250 3m(M6)
66/1,516/4
7,27,2/1,8
20/5
ST 2006-12ST 2006-12/3ST 3212-16/4
2/12/11/1
1,51,5/0,373,8/0,9
1,81,8/0,444,6/1,1
6040/2033/17
360120/240100/200
E31
E42
75
110
12
14
101
140
18
23
110
158
21
23
112
171
27
29
1600 1Bm(M3)2m
(M5)1Am(M4)
88/28/2
12/3
1010/2,510/2,5
14/3,6
ST 3016-8ST 3016-8/2ST 3216-8/2
ST 3216-12/3
1/11/11/1
1/1
2,32,3/0,572,4/0,6
3,8/0,9
2,82,8/0,682,9/0,72
4,6/1,1
6040/2050/20
33/17
360120/240140/280
100/200
E32
E42
E42
72
110
110
13
14
14
98
140
140
22
23
23
107
158
158
22
23
23
109
171
171
28
29
29
2000 2m(M5)1Am(M4)
44/16
6/1,5
4,84,8/1,2
7,27,2/1,8
ST 2010-8ST 2010-8/2ST 2010-12ST 2010-12/3
2/12/12/12/1
1,51,5/0,37
2,32,3/0,57
1,81,8/0,44
2,82,8/0,68
6040/20
6040/20
360120/240
360120/240
E31
E32
75
75
12
12
101
101
18
18
110
110
21
21
112
112
27
27
2500 1Am(M4)
6/1,58/2
7,2/1,810/2,5
ST 5025-6/1,5ST 5025-8/2
1/11/1
3,0/0,763,8/0,9
3,6/0,914,6/1,1
40/2033/17
120/240100/200
E42 118118
1515
148148
2424
166166
2424
179179
3030
3200 1Bm(M3)2m
(M5)1Am(M4)1Bm(M3)
44/14/1
6/1,5
6/1,5
4,84,8/1,24,8/1,2
7,2/1,8
7,2/1,8
ST 3016-8ST 3016-8/2ST 3216-8/2
ST 3216-12/3
ST 6032-6/1,5
2/12/12/1
2/1
1/1
2,32,3/0,572,4/0,6
3,8/0,9
3,8/0,9
2,82,8/0,682,9/0,72
4,6/1,1
4,6/1,1
6040/2050/20
33/17
33/17
360120/240140/280
100/200
100/200
E32
E42
E42
82
123
123
128
13
14
14
15
112
153
153
158
22
22
23
24
130
171
171
176
22
23
23
24
143
184
184
189
28
29
29
30
5000 1Am(M4)1Am(M4)
3,2/0,75
4/1
3,8/0,9
4,8/1,2
ST 5025-6/1,5
ST 5025-8/2
2/1
2/1
3,0/0,76
3,8/0,9
3,6/0,91
4,6/1,1
40/20
33/17
120/240
100/200
E42 138
138
15
15
-
-
-
-
201
201
24
24
197
197
30
30
6300 1Bm(M3)
3,2/0,75 3,8/0,9 ST 6032-6/1 ,5 2/1 3,8/0,9 4,6/1,1 33/17 100/200 E42 148 15 - - 211 24 207 30
Andere Hubgeschwindigkeitensiehe Seite 79.
Other hoisting speeds seepage 79.
Autres vitesses de levage voirpage 79.
=1/1 =2/1
8/22/2019 05.Repasair Hoist
6/18
ST.FM
Kettenzge STST Chain HoistsPalans chane ST
10 05.11
Standardprogramm
Standard Programme
Programme standard
29
153
191
A3 390
HW
8
245
A4
144
24
10
180
275
c1025a02
19
30
17
4
28
*
A5 A6
500kg
500kg
Kettenzug "stationr" "Stationary" chain hoist Palan chane "fixe accroch"
Auswahltabelle: 9 Selection table: 9 Tableau de slection : 9
10
180
A5
275
c1025a01
29
153
191
329
A3
HW
8
245
A4
164A6
20
19
30
17
367
*250kg
250kg
* Material des KettenspeichersK = KunststoffS = StahlblechT = Textil
* Material of chain boxK = PlasticS = Sheet metalT = Fabric
* Matriau du bac chaneK = Matire plastiqueS = Tle dacierT = Textile
ST 05
1/1
*
=1/1HW A3 A4 A5 A6[m] [mm]
71524
347447496
281303303
145 90100100
KSSStandard
7 376 303 145 100 S
Option
2/1
*
=2/1HW A3 A4 A5 A6
[m] [mm]3,57,512
347447496
281303303
145 90100100
KSSStandard
3,5 376 303 145 100 S
Option
8/22/2019 05.Repasair Hoist
7/18
ST.FM
Kettenzge STST Chain Hoists
Palans chane ST
1105.11
Standardprogramm
Standard Programme
Programme standard
Kettenzug "stationr" "Stationary" chain hoist Palan chane "fixe accroch"
Auswahltabelle: 9 Selection table: 9 Tableau de slection : 9
* Material des KettenspeichersK = KunststoffS = StahlblechT = Textil
* Material of chain boxK = PlasticS = Sheet metalT = Fabric
* Matriau du bac chaneK = Matire plastiqueS = Tle dacierT = Textile
ST 10
1/1
*
=1/1HW A3 A4 A5 A6[m] [mm]
12253050
60
484571651641
691
352347347347
347
160150150320
320
160155155155
155
KTTT
S
Standard
122530
471571651
347347347
150150150
155155155
SSS O
ption
2/1
*
=2/1HW A3 A4 A5 A6
[m] [mm]6
12,5152530
484571651641691
352347347347347
160150150320320
160155155155155
KTTTS
Standard
612,515
471571651
347347347
150150150
155155155
SSS O
ption
8/22/2019 05.Repasair Hoist
8/18
ST.FM
Kettenzge STST Chain HoistsPalans chane ST
12 05.11
Standardprogramm
Standard Programme
Programme standard
Kettenzug "stationr" "Stationary" chain hoist Palan chane "fixe accroch"
Auswahltabelle: 9 Selection table: 9 Tableau de slection : 9
* Material des KettenspeichersK = KunststoffS = StahlblechT = Textil
* Material of chain boxK = PlasticS = Sheet metalT = Fabric
* Matriau du bac chaneK = Matire plastiqueS = Tle dacierT = Textile
ST 20
1/1
*
=1/1HW A3 A4 A5 A6[m] [mm]
8162230
40
532619699689
739
398393393393
393
160150150320
320
160155155155
155
KTTT
S
Standard
81622
519619699
393393393
150150150
155155155
SSS O
ption
2/1
*
=2/1HW A3 A4 A5 A6
[m] [mm]48111520
532619699689739
398393393393393
160150150320320
160155155155155
KTTTS
Standard
4811
519619699
393393393
150150150
155155155
SSS O
ption
8/22/2019 05.Repasair Hoist
9/18
ST.FM
Kettenzge STST Chain Hoists
Palans chane ST
1305.11
Standardprogramm
Standard Programme
Programme standard
Kettenzug "stationr" "Stationary" chain hoist Palan chane "fixe accroch"
Auswahltabelle: 9 Selection table: 9 Tableau de slection : 9
* Material des KettenspeichersK = KunststoffS = StahlblechT = Textil
* Material of chain boxK = PlasticS = Sheet metalT = Fabric
* Matriau du bac chaneK = Matire plastiqueS = Tle dacierT = Textile
ST 30
1/1
*
=1/1HW A3 A4 A5 A6[m] [mm]
4,5101220
30
532619699689
739
398393393393
393
160150150320
320
160155155155
155
KTTT
S
Standard
61012
519619699
393393393
150150150
155155155
SSS O
ption
2/1
*
=2/1HW A3 A4 A5 A6
[m] [mm]2,2561015
532619699689739
398393393393393
160150150320320
160155155155155
KTTTS
Standard
356
519619699
393393393
150150150
155155155
SSS O
ption
8/22/2019 05.Repasair Hoist
10/18
ST.FM
Kettenzge STST Chain Hoists
Palans chane ST
3505.11
Doppelkettenzge STD
STD Dual Chain Hoists
Palans chane STD deux crochets
Kettenzug "stationr" "Stationary" chain hoist Palan chane "fixe acccroch"
Auswahltabelle: 32 Selection table: 32 Tableau de slection : 32
* Material des KettenspeichersK = KunststoffS = StahlblechT = Textil
* Material of chain boxK = PlasticS = Sheet metalT = Fabric
* Matriau du bac chaneK = Matire plastiqueS = Tle dacierT = Textile
STD 30..E
max. Hakenweg
max. hook pathHauteur de leve max.
A3 *
2/2-2 4/2-2
[m] [mm]2x 42x 62x 8
2x 102x 16
2x 22x 32x 42x 52x 8
644731811801851
KTTTS
Standard
2x 42x 62x 8
2x 22x 32x 4
631731811
SSS Option
A1 min. - max. [mm]2/2-2 4/2-2
332 - 3004 332 - 3004
Kettenzug "stationr" "Stationary" chain hoist Palan chane "fixe acccroch"
Auswahltabelle: 32 Selection table: 32 Tableau de slection : 32
STD 30..Z
max. Hakenwegmax. hook path
Hauteur de leve max.
A3 *
2/2-2 4/2-2
[m] [mm]2x 42x 62x 8
2x 102x 16
2x 22x 32x 42x 52x 8
712799879869919
KTTTS
Standard
2x 4
2x 62x 8
2x 2
2x 32x 4
699
799879
S
SS Option
A1 min. - max. [mm]2/2-2 4/2-2
782 - 3016 712 - 3997
8/22/2019 05.Repasair Hoist
11/18
ST.FM
Kettenzge STST Chain HoistsPalans chane ST
36 05.11
Doppelkettenzge STD
STD Dual Chain Hoists
Palans chane STD deux crochets
Kettenzug "stationr" "Stationary" chain hoist Palan chane "fixe acccroch"
Auswahltabelle: 32 Selection table: 32 Tableau de slection : 32
2/2-2=294/2-2=35
2/2-2=2034/2-2=160
2/2-2=784/2-2=121
2/2-2=784/2-2=121
2/2-2=784/2-2=121
2/2-2=369
4/2-2=469
A1
278
A1
278
1815
155
335
14
84
207
165 273
A3
189
36
522
24
36
A1
278
24218
18
84
120
18
c1250a01
* Material des KettenspeichersK = KunststoffS = StahlblechT = Textil
* Material of chain boxK = PlasticS = Sheet metalT = Fabric
* Matriau du bac chaneK = Matire plastiqueS = Tle dacierT = Textile
Kettenzug "stationr" "Stationary" chain hoist Palan chane "fixe acccroch"
Auswahltabelle: 32 Selection table: 32 Tableau de slection : 32
2/2-2=29
4/2-2=35
2/2-2=784/2-2=121
2/2
-2=
369
4/2
-2=
469
2/2-2=3704/2-2=326
2/2-2=1644/2-2=121
2/2-2=784/2-2=121
2/2-2= A1-864/2-2= A1
A1
84
207
165 273
A3
189
522
36
107
15
278
242
18
824
242
18
15 1
55
297
120
84
18
18
278
24218
60
A1
242
18 18
84
24
120
c1250a02
STD 50..ESTD 60..E
max. Hakenweg
max. hook pathHauteur de leve max.
A3 *
2/2-2 4/2-2
[m] [mm]2x 102x 252x 40
2x 52x 12,52x 20
86310441244
KSSStandard
2x 62x 102x 10
2x 32x 52x 5
766885885
TTS Option
A1 min. - max. [mm]2/2-2 4/2-2
405 - 2511 405 - 4023
STD 50..ZSTD 60..Z
max. Hakenwegmax. hook path
Hauteur de leve max.
A3 *
2/2-2 4/2-2
[m] [mm]2x 102x 252x 40
2x 52x 12,52x 20
95511361336
KSSStandard
2x 62x 102x 10
2x 32x 52x 5
854974974
TTS Option
A1 min. - max. [mm]2/2-2 4/2-2
946 - 2512 860 - 3992
8/22/2019 05.Repasair Hoist
12/18
ST.FM
Kettenzge STST Chain Hoists
Palans chane ST
3705.11
Doppelkettenzge STD
STD Dual Chain Hoists
Palans chane STD deux crochets
Elektrofahrwerk Electric trolley Chariot lectrique
Auswahltabelle: 32 Selection table: 32 Tableau de slection : 32
16
26
63
80
A1 + 520
260
A1 + 285
76
205
80
40
B3
2/2-2=257
4/2-2=325
2/2-2=20
4/2-2=24
8
16
336 50-190 240
30
c1246a01
A1
3,5 (7,5)*2
16
R C090
* Material des KettenspeichersK = KunststoffS = StahlblechT = Textil
*2 Bei geneigtem Flansch
* Material of chain boxK = PlasticS = Sheet metalT = Fabric
*2 With sloping flange
* Matriau du bac chaneK = Matire plastiqueS = Tle dacierT = Textile
*2 Avec bride incline
Elektrofahrwerk Electric trolley Chariot lectrique
Auswahltabelle: 32 Selection table: 32 Tableau de slection : 32
R C90
16
26
63
80
205
80
40
336 50...160
225
30
B3
1
30
2/2-2
=
257
4/2-2
=
325
2/2-2=
20
4/2-2=
24
2/2-2 = A1 + 426
4/2-2 = A1 + 387
2/2-2 = A1 + 181
4/2-2 = A1 + 142
A1
c1246v02
3,5 (7,5)*2
8
R C090
PufferBuffersButes
STD 05..Z
max. Hakenwegmax. hook path
Hauteur de leve max.
UE-N 22E
2/2-2 4/2-2 B3 *
[m] [mm]2x 3,52x 7
2x 10
2x 1,752x 3,52x 5
336407456
SSSStandard
A1 min. - max. [mm]2/2-2 4/2-2
529 - 1993 568 - 2008
PufferBuffers
Butes
STD 05..E
max. Hakenweg
max. hook pathHauteur de leve max.
UE-N 22E
2/2-2 4/2-2 B3 *
[m] [mm]2x 3,52x 7
2x 10
2x 1,752x 3,52x 5
418489539
SSSStandard
A1 min. - max. [mm]2/2-2 4/2-2
216 - 1008 216 - 1008
8/22/2019 05.Repasair Hoist
13/18
ST.FM
Kettenzge STST Chain HoistsPalans chane ST
38 05.11
Doppelkettenzge STD
STD Dual Chain Hoists
Palans chane STD deux crochets
Elektrofahrwerk Electric trolley Chariot lectrique
Auswahltabelle: 32 Selection table: 32 Tableau de slection : 32
* Material des KettenspeichersK = KunststoffS = StahlblechT = Textil
*2 Bei geneigtem Flansch
* Material of chain boxK = PlasticS = Sheet metalT = Fabric
*2 With sloping flange
* Matriau du bac chaneK = Matire plastiqueS = Tle dacierT = Textile
*2 Avec bride incline
Elektrofahrwerk Electric trolley Chariot lectrique
Auswahltabelle: 32 Selection table: 32 Tableau de slection : 32
STD 10..E
max. Hakenweg
max. hook pathHauteur de leve max.
KFD 10.10E
2/2-2 4/2-2 B3 *
[m] [mm]2x 42x 9
2x 132x 162x 20
2x 22x 4,52x 6,52x 82x 10
670757837827877
KTTTS
Standard
2x 42x 9
2x 13
2x 22x 4,52x 6,5
657757837
SSS Option
A1 min. - max. [mm]2/2-2 4/2-2
272 - 2992 272 - 2992
c1228a01
63
78
25
17
58...300
3,5 (8)*2
96
RR C090
STD 10..Z
max. Hakenwegmax. hook path
Hauteur de leve max.
KFD 10.10E
2/2-2 4/2-2 B3 *
[m] [mm]2x 42x 9
2x 132x 162x 20
2x 22x 4,52x 6,52x 82x 10
727814894884934
KTTTS
Standard
2x 4
2x 92x 13
2x 2
2x 4,52x 6,5
714
814894
S
SS Option
A1 min. - max. [mm]2/2-2 4/2-2
593 - 2993 542 - 3006
c1228a01
63
78
25
17
58...300
3,5 (8)*2
96
RR C090
8/22/2019 05.Repasair Hoist
14/18
ST.FM
Kettenzge STST Chain Hoists
Palans chane ST
3905.11
Doppelkettenzge STD
STD Dual Chain Hoists
Palans chane STD deux crochets
Elektrofahrwerk Electric trolley Chariot lectrique
Auswahltabelle: 32 Selection table: 32 Tableau de slection : 32
* Material des KettenspeichersK = KunststoffS = StahlblechT = Textil
*2 Bei geneigtem Flansch
* Material of chain boxK = PlasticS = Sheet metalT = Fabric
*2 With sloping flange
* Matriau du bac chaneK = Matire plastiqueS = Tle dacierT = Textile
*2 Avec bride incline
Elektrofahrwerk Electric trolley Chariot lectrique
Auswahltabelle: 32 Selection table: 32 Tableau de slection : 32
174 322
25
2331
93
B3
13,5
13,527
496
82
122
66-300
40
30
30
2/2-2=A1-70
4/2-2=A1
2/2
-2
=402
4/2
-2
=481
2/2-2=237
4/2-2=201
2/2-2=24
4/2-2=29
A1
202
202302
151144
47
235
297
c1227v02
20/25 m/min (50/60 Hz): 310; < 20/25 m/min (50/60 Hz): 330
32 m/min
3200 kg
STD 30..E
max. Hakenweg
max. hook pathHauteur de leve max.
KFD 32.30E
2/2-2 4/2-2 B3 *
[m] [mm]2x 42x 62x 8
2x 102x 16
2x 22x 32x 42x 52x 8
746833913903953
KTTTS
Standard
2x 42x 62x 8
2x 22x 32x 4
733833913
SSS Option
A1 min. - max. [mm]2/2-2 4/2-2
332 - 3004 332 - 3004
c1229a01
82
102
30
24
66...300*1
7,5 (13,5)*2
93
RR C090
STD 30..Z
max. Hakenwegmax. hook path
Hauteur de leve max.
KFD 32.30E
2/2-2 4/2-2 B3 *[m] [mm]
2x 42x 62x 8
2x 102x 16
2x 22x 32x 42x 52x 8
797884964954
1004
KTTTS
Standard
2x 4
2x 62x 8
2x 2
2x 32x 4
784
884964
S
SS Option
A1 min. - max. [mm]2/2-2 4/2-2
782 - 3016 712 - 3997
c1229a01
82
102
30
24
66...300*1
7,5 (13,5)*2
93
RR C090
8/22/2019 05.Repasair Hoist
15/18
ST.FM
Kettenzge STST Chain HoistsPalans chane ST
40 05.11
Doppelkettenzge STD
STD Dual Chain Hoists
Palans chane STD deux crochets
Elektrofahrwerk Electric trolley Chariot lectrique
Auswahltabelle: 32 Selection table: 32 Tableau de slection : 32
B3
25
23
93
495
113
82
66-300
31
18
18
36
5225000 kg:
20/25 m/min (50/60 Hz)
6300 kg:
16/20 m/min (50/60 Hz)
2/2-2=2094/2-2=166
2/2-2=294/2-2=35
2/2-2=467
4/2-2=567
A1332
102
B1=A1412
302151
144 20247
256
c1227a03
40
30
30
20/25 m/min (50/60 Hz): 325
< 20/25 m/min (50/60 Hz): 345
207 315
* Material des KettenspeichersK = KunststoffS = StahlblechT = Textil
*2 Bei geneigtem Flansch
* Material of chain boxK = PlasticS = Sheet metalT = Fabric
*2 With sloping flange
* Matriau du bac chaneK = Matire plastiqueS = Tle dacierT = Textile
*2 Avec bride incline
Elektrofahrwerk Electric trolley Chariot lectrique
Auswahltabelle: 32 Selection table: 32 Tableau de slection : 32
2/2-2=A1- 86
4/2-2=A1
2/2
-2
=467
4/2
-2
=567
2/2-2=370
4/2-2=327
2/2-2=29
4/2-2=35
A1
332
202
202302
151144
47
256
40
30
30
c1227a04
20/25 m/min (50/60 Hz): 325
< 20/25 m/min (50/60 Hz): 345
25
2331
93
B3
18
18
36
522
82
102
66-300
5000 kg 20/25 m/min (50/60 Hz)
6300 kg 16/20 m/min (50/60 Hz)
207 315
STD 50..ESTD 60..E
max. Hakenweg
max. hook pathHauteur de leve max.
KFD 32.50E
KFD 32.60E
2/2-2 4/2-2 B3 *
[m] [mm]2x 102x 252x 40
2x 52x 12,52x 20
95011301330
KSSStandard
2x 62x 102x 10
2x 32x 52x 5
850970970
TTS Option
A1 min. - max. [mm]2/2-2 4/2-2
405-2511 405-4023
c1229a01
82
102
30
24
66...300*1
7,5 (13,5)*2
93
RR C090
STD 50..ZSTD 60..Z
max. Hakenwegmax. hook path
Hauteur de leve max.
KFD 32.50EKFD 32.60E
2/2-2 4/2-2 B3 *[m] [mm]
2x 102x 252x 40
2x 52x 12,52x 20
104012251425
KSSStandard
2x 62x 102x 10
2x 32x 52x 5
94010601060
TTS Option
A1 min. - max. [mm]2/2-2 4/2-2
946-2512 860-3992
c1229a01
82
102
30
24
66...300*17,5 (13,5)*2
93
RR C090
8/22/2019 05.Repasair Hoist
16/18
ST.FM
Kettenzge STST Chain Hoists
Palans chane ST
4105.11
Big Bag-Ausfhrung STB
STB Big Bag Design
Excution Big Bag STB
Big Bag-Ausfhrung STB
Kettenzge STB heben durch denfrei whlbaren Abstand zwischenKettenzug und Lasthaken auch
sperrige Lasten bis zur hchstenHakenstellung, ohne Strkantenwie Fahrwerk, Kettenzug oderKettenspeicher.
STB Big Bag design
The clearance between hoist andload hook of STB chain hoists canbe selected freely enabling them
to lift unwieldy loads up to tophook position without any hin-drances such as trolley, chainhoist or chain box.
Excution Big Bag STB
La distance entre crochet decharge et palan des palans chane STB peut tre librement
choisie et permet le levage descharges encombrantes jusqu' laposition plus haute du crochetsans obstacles comme chariot,palan ou bac chane.
Auswahltabelle Selection table Tableau de slection
FEM (ISO) Typ
Type
Fahrwerk
TrolleyChariot
Kettengre
Chain sizeDimensionde la chane
50 Hz 60 Hz TypType[kg] [m/min] [kg]
500 1Am (M4) 8/2 10/2,5 STB 1005-8/2 1/1-1 KFD 10 5 x 16 80 411000 1Am
2m
(M4)
(M5)
4/1
8/2
4,8/1,2
10/2,5
STB 1005-8/2
STB 3010-8/2
2/1-1
1/1-1
KFD 10
KFD 32
5 x 16
7 x 21,9
85
125
41
421600 2m (M5) 8/2 10/2,5 STB 5016-8/2 1/1-1 KFD 32 9 x 27 220 422000 2m (M5) 4/1 4,8/1,2 STB 3010-8/2 2/1-1 KFD 32 7 x 21,9 135 423200 2m (M5) 4/1 4,8/1,2 STB 5016-8/2 2/1-1 KFD 32 9 x 27 250 42
=1/1-1 =2/1-1
Elektrofahrwerk Electric trolley Chariot lectrique
1/1-1 = 366 - 20002/1-1 = 341 - 2000
1/1-1=
311
2/1-1=
371
267
18
17
58-300
93
B3
63
92
135
31
35
0
79
382
121242
115
272 - 1906/1931
17248
172
259
9,5
402
24
40
24
c1275v01
20/25 m/min (50/60 Hz): 300
< 20/25 m/min (50/60 Hz): 320
STB 10..
max. Hakenwegmax. hook path
Hauteur de leve max.
KFD10.10
*
1/1-1 2/1-1 B3
[m] [mm]818263240
49131620
670757837827877
KTTTS
Standard
81826
4913
657757837
SSS Option
c1228a01
63
78
25
17
58...300
3,5 (8)*2
96
RR C090
* Material des KettenspeichersK = KunststoffS = StahlblechT = Textil
*2 Bei geneigtem Flansch
* Material of chain boxK = PlasticS = Sheet metalT = Fabric
*2 With sloping flange
* Matriau du bac chaneK = Matire plastiqueS = Tle dacierT = Textile
*2 Avec bride incline
8/22/2019 05.Repasair Hoist
17/18
ST.FM
Kettenzge STST Chain HoistsPalans chane ST
42 05.11
Big Bag-Ausfhrung STB
STB Big Bag Design
Excution Big Bag STB
Elektrofahrwerk Electric trolley Chariot lectrique
1/1-1 = 470 - 2000
2/1-1 = 434 - 2000
1/1-1=402
2/1-1=481
B3
174 322
25
23
93
82
122
66-300
31
13,5
496
412 332 - 1862/1898
302151
144
115
436
297
20247
235
c1276v01
40
30
30
20/25 m/min (50/60 Hz): 310; < 20/25 m/min (50/60 Hz): 330
STB 30..
max. Hakenweg
max. hook pathHauteur de leve max.
KFD
32.30
*
1/1-1 2/1-1 B3[m] [mm]
812162032
4681016
746833913903953
KTTTS
Standard
81216
468
733833913
SSS Option
c1229a01
82
102
30
24
66...300*1
7,5 (13,5)*2
93
RR C090
Elektrofahrwerk Electric trolley Chariot lectrique
1/1-1 = 608 - 2500
2/1-1 = 565 - 2500
B3
25
23
93
495
113
82
66-300
31
52232 m/min
3200 kg
1/1-1=46
7
2/1-1=56
7
332
102
405 - 2297/2340412
302151
144 20247
256
c1277v01
40
30
30
20/25 m/min (50/60 Hz): 325
< 20/25 m/min (50/60 Hz): 345
18
207 315
STB 50..
max. Hakenwegmax. hook path
Hauteur de leve max.
KFD32.50
*
1/1-1 2/1-1 B3[m] [mm]
205080
102540
94611271327
KSSStandard
1220
20
610
10
845965
965
TT
SOption
c1229a01
82
102
30
24
66...300*1
7,5 (13,5)*2
93
RR C090
* Material des KettenspeichersK = KunststoffS = StahlblechT = Textil
*2 Bei geneigtem Flansch
* Material of chain boxK = PlasticS = Sheet metalT = Fabric
*2 With sloping flange
* Matriau du bac chaneK = Matire plastiqueS = Tle dacierT = Textile
*2 Avec bride incline
8/22/2019 05.Repasair Hoist
18/18
Sach-Nr.9900240
F-PI-1-DE/EN/FR-05.1
1-v
STAHL CraneSystems GmbHDaimlerstr. 6, 74653 Knzelsau, GermanyTel +49 7940 128-0, Fax +49 7940 55665marketing@stahlcranes.com
Tochtergesellschaften/Subsidiaries
ChinaShanghai
Tel +86 21 66083737
Fax +86 21 66083015
infochina@stahlcranes.com
IndiaChennai
Tel +91 44 43523955
Fax +91 44 43523957infoindia@stahlcranes.com
SingaporeSingapore
Tel +65 62712220
Fax +65 63771555infosingapore@stahlcranes.com
United Arab EmiratesDubai
Tel +971 4 8053700
Fax +971 4 8053701infouae@stahlcranes.com
France
Paris
Tel +33 1 39985060
Fax +33 1 34111818
infofrance@stahlcranes.com
Italy
S. Colombano
Tel +39 0185 358391
Fax +39 0185 358219
infoitalia@stahlcranes.com
Spain
Madrid
Tel +34 91 4840865
Fax +34 91 4905143
infospain@stahlcranes.com
Great Britain
Birmingham
Tel +44 121 7676400
Fax +44 121 7676485
infouk@stahlcranes.com
Portugal
Lisbon
Tel +351 21 4447160
Fax +351 21 4447169
ferrometal@stahlcranes.com
USA
Charleston, SC
Tel +1 843 7671951
Fax +1 843 7674366
infous@stahlcranes.com
Die Adressen von ber 100 Vertriebspartnern weltweit finden Sie im Internet auf www.stahlcranes.com unter Kontakt.You will find the addresses of over 100 sales partners on the Internet at www.stahlcranes.com under contact.
Vertriebspartner/Sales partners
berreicht durch/Distributed by