Post on 28-Jan-2020
The new generation of fully automatic rotating lasers forprofessionals
H
fully automatic horizontal rotating laser
H2N
fully automatic dual slope laser
HVA
Fully automatic horizontal/vertical laser withAutoAlign function
HVA2N
Fully automatic horizontal/vertical laser withAutoAlign and dual slope functions
%
2
Made i
n Germ
any
new
new
primus2 en.qxp 05.10.2011 09:16 Seite 1
www.merl
inlaz
er.co
m
Nedo is the new series of fully automatic rotating lasers for professionals.Ideal for levelling, aligning and grade control. Reliable and rugged for tough construction jobs. Uncompromising quality for professionals. The high-power laser diode with laser class 3R ensures clear beam visibility even under poor lighting conditions. The series sets a new standard for fully automatic rotating lasers. Top technology made inGermany.
primus2 en.qxp 05.10.2011 09:16 Seite 2
www.merl
inlaz
er.co
m
The new standard for fully automatic rotating lasers
Made i
n Germ
any
The standard for accuracy
Many rotating lasers are accurate – but unfortunately only on paper. The rotating lasers of the series are highly accurate under all operating conditions: In driving rain, in freezing cold or in blazing heat.Whenever you need the very best.
The standard for easy operationAre you tired of over-complicated handling?Then you will be delighted by the simple, intuitive operation of the new
rotating lasers. The LCD display shows the operating state,rotation speed and battery level. And in the H2N andHVA2N it also clearly gives you the inclination on the X and Y axis.
The standard for reliability
You are a professional, and you work like one! You have to be able to rely on your equipment. In dust, rain and cold. And when you are facing a deadline.The rotating lasers of the series are waterproof and dustproof to IP 66 and perform reliably even under harsh conditions.
lasers can even be hosed down and cleaned after use.
The standard for ruggedness
Thanks to their innovative shock protection system, the new rotating lasers of the series can easily withstand a fall from a height of 1 m. The thick lining and rotor protection provide additional safety.
The standard for long life
High-power, rechargeable NiMH batteries with EneloopTM technologyensure a long operating life of more than 100 hours, with minimal self-discharging. The intelligent power compartment permits quickchanging between battery and rechargeable battery operation.
Included as standard:carefree package with
y 3-year warrantyy Free annual check during the
warranty period
primus2 en.qxp 05.10.2011 09:17 Seite 3
www.merl
inlaz
er.co
m
Rotating laser H The fully automatic horizontal rotating laser for professionals
Features:
y Fully automatic rotating laser for horizontal applications
y Robust, motor-powered levelling
y Large, clear display showing rotation speed, battery level, etc.
y Highly visible, powerful laser beam, laser class 3R, for easy workat close range
y Automatic level control stops the laser if it receives a heavy jolt.In this way, height errors are avoided.
y Extremely easy to use
y Rotor protection made of break-proof glass
y Laser receiver ACCEPTORpro
y Carefree package with 3-year warranty and free annual checkduring the warranty period
Technical data H:
Self-levelling range ± 5° motor-powered, withautomatic level control
Levelling accuracy ± 0.5 mm/10 mLaser type < 5 mW, laser class 3R, 635 nmOperation duration approx. 100 h Weight 3.6 kgDimensions (W/D/H) 210 x 208 x 185 mmOperating temperature -20°C to + 50°CWorking range with ø 700 mreceiver ACCEPTORpro
Rotating speed 600 rpmProtection class IP 66
Optional accessory:Outdoor package
Ref.-No. 200 350
Order information:
H Ref.-No. 472 020Incl. transport case, laser receiver ACCEPTORpro,rod clamp, rechargeable batteries and charger
Optional accessory:Outdoor package Ref.-No. 200 350
ACCEPTORpro: sturdy laser receiver with very large detector field.With the ACCEPTORpro laser receiver, the working range of thePRIMUS2 H is enlarged to 700 m diameter.
Applications:Elevation control, depth control for excavations, rough and finegrading, setting foundations, concrete forming, bricklaying, layingscreed, setting reference markers, machine automation, landscaping
Made in Germany
primus2 en.qxp 05.10.2011 09:19 Seite 4
www.merl
inlaz
er.co
m
Rotating laser H2NThe fully automatic dual slope laser for professionals%
2
For horizontal use and forslopes in one or two axes
Features:
y Fully automatic dual slope laser
y Robust, motor-powered levelling
y Direct grade entry for the x and y axis
y Slope values once input are stored upon switch-off
y Large, clear display showing inclination, rotation speed, batterylevel, etc.
y High-power laser diode, laser class 3R, for highly visible laser beamand easy work at the close range
y Automatic level control stops the laser if it receives a heavy jolt. Inthis way, height errors are avoided.
y Rotor protection made of break-proof glass
y Carefree package with 3-year warranty and free annual checkduring the warranty period
COMMANDER2: sturdy laser receiver with integrated radio remotecontrol. All functions of the laser including input of slopes can be controlled with the COMMANDER2.
Applications:Elevation control, depth control for excavations, rough and finegrading, setting foundations, concrete forming, bricklaying, layingscreed, setting reference markers, machine automation, landscaping,checking of inclinations
Technical data H2N:
Self-levelling range ± 5° motor-powered, withautomatic level control
Levelling accuracy ± 0.5 mm/10 mSetting of slopes ± 10%, direct entryin two axesLaser type < 5 mW, laser class 3R, 635 nmOperation duration approx. 100 h Weight 3.6 kgDimensions (W/D/H) 210 x 208 x 200 mmOperating temperature -20°C to + 50°CWorking range with ø 700 mreceiver COMMANDER2 H2NWorking range radio approx. 150 mremote controlRotating speed 600 rpmProtection class IP 66
Order information:
H2N Ref.-No. 472 030Incl. transport case, rechargeable batteries and charger
H2N Ref.-No. 472 031Incl. transport case, multi function module COMMANDER2
H2N (laser receiver incl. radio remote control), rod clamp, rechargeable batteries and charger
H2N Ref.-No. 472 032Incl. laser receiver ACCEPTORdigital, rod clamp, rechargeablebatteries and charger
Optional accessory:Telescopic sight Ref.-No. 461 096Outdoor package Ref.-No. 200 350
Made i
n Germ
any
primus2 en.qxp 05.10.2011 09:19 Seite 5
www.merl
inlaz
er.co
m
Rotating laser HVA The fully automatic horizontal/vertical rotating laser with AutoAlign function for professionals
Features:
y Fully automatic rotating laser for horizontal and vertical applications
y AutoAlign function: automatic alignment of the laser beam to the zeromark of the laser receiver COMMANDER2 HVA
y Multi function module COMMANDER2 HVA: laser receiver incl. radioremote control
y Robust motor-powered levelling
y Large, clear display showing rotation speed, battery level, etc.
y Highly visible, powerful laser beam, laser class 3R, for easy work atclose range
y Automatic level control stops the laser if it receives a heavy jolt. Inthis way, height errors are avoided.
y Manual setting of slopes in 2 axes
y Scan function and dot mode
y Upward plumb beamApplications:Use of batter boards, elevation control, depth control for excavati-ons, rough and fine grading, setting foundations, concrete forming,bricklaying, laying screed, setting reference markers, machineautomation, landscaping, drywall installation, ceiling construction,facade construction
Order information:
HVA Ref.-No. 472 050
Incl. transport case, multi function module COMMANDER2
HVA (laser receiver incl. radio remote control), rod clamp, magnetic target board, rechargeable batteries and charger
Optional accessory:Indoor package 1 Ref.-No. 210 350Indoor package 2 Ref.-No. 210 351
Technical data HVA:
Self-levelling range ± 5° motor-powered, withautomatic level control
Levelling accuracy ± 0.5 mm/10 mSetting of slopes in two axes manualLaser type < 5 mW, laser class 3R, 635 nmOperation duration approx. 100 hDimensions (W/D/H) 210 x 208 x 200 mmOperating temperature -20°C to + 50°CWorking range ø 500 m with COMMANDER2 HVAWorking range multi function approx. 50 m AutoAlignmodule COMMANDER2 HVA approx. 150 m radio remote controlRotating speed 10, 60, 300, 600 rpmScanning angle 0°, 5°, 10° and 15°
Protection class IP 66
Optional accessory:Indoor package
Ref.-No. 210 350
Made in Germany
AutoAlign function:At the push of a button, the laser level automatically aligns withthe laser receiver COMMANDER2 HVA. Ideal when batter boardsare used.
primus2 en.qxp 05.10.2011 09:20 Seite 6
www.merl
inlaz
er.co
m
Features:
y Fully automatic rotating laser for horizontal and vertical applications
y Dual slope function
y AutoAlign function; automatic alignment of the laser beam to thezero mark of the laser receiver COMMANDER2 HVA2N
y Multi function module COMMANDER2 HVA2N: laser receiver incl.radio remote control
y Robust motor-powered levelling
y Direct grade entry for the x and y axis
y Slope values once input are stored upon switch-off
y Large, clear display showing inclination, rotation speed, batterylevel, etc.
y High-power laser diode, laser class 3R, for highly visible laser beamand easy work at the close range
y Automatic level control stops the laser if it receives a heavy jolt. Inthis way, height errors are avoided.
Order information:
HVA2N Ref.-No. 472 060Incl. transport case, multi function module COMMANDER2
HVA2N (laser receiver incl. radio remote control), rod clamp, magnetic target board, rechargeable batteries and charger
Optional accessory:Telescopic sight Ref.-No. 461 096Indoor package1 Ref.-No. 210 350Indoor package 2 Ref.-No. 210 351
Rotating laser HVA2N The fully automatic horizontal/vertical dual slope laser with AutoAlign function. The all-rounder for professionals.
Technical data HVA2N:
Self-levelling range ± 5° motor-powered, withautomatic level control
Levelling accuracy ± 0.5 mm/10 mSetting of slopes in two axes ± 10%, direct entryLaser type < 5 mW, laser class 3R, 635 nmOperation duration approx. 100 hDimensions (W/D/H) 210 x 208 x 200 mmOperating temperature -20°C to + 50°CWorking range ø 700 m with COMMANDER2 HVA2NWorking range multi function approx. 50 m AutoAlignmodule COMMANDER2 HVA2N approx. 150 m radio remote controlRotating speed 10, 60, 300, 600 rpmScanning angle 0°, 5°, 10° and 15°Protection class IP 66
Made i
n Germ
any
Dual slope
function
For horizontal use and forslopes in one or two axes
AutoAlign function:At the push of a button, the laser level automatically aligns withthe laser receiver. Ideal when batter boards are used.
Dual slope function: Optimal for depth control for excavations,for rough and fine grading and for landscaping.
AutoAlign
function
primus2 en.qxp 05.10.2011 09:21 Seite 7
www.merl
inlaz
er.co
m
Made in Germany
Product overview
At our sites, time is always of the essence. That's why we have to be able to rely on our equipment. This applies particu-larly for measuring equipment.The PRIMUS2 H2N from Nedo is very sturdy and extremely reliable. This laser has never once let us down, even though it's sometimes handled roughly. Our employeesappreciate its sturdiness and above all its simple and intuitivehandling. Just switch it on and off you go.
H H2N HVA HVA2N
Laser class 3R 3R 3R 3R
Accuracy ± 0.5 mm/10 m ± 0.5 mm/10 m ± 0.5 mm/10 m ± 0.5 mm/10 m
Setting of slopes - ± 10%, direct manual ± 10%, directin two axes entry entry
Working range with Ø 700 m Ø 700 m Ø 500 m Ø 700 m
laser receiver
Protection class IP 66 IP 66 IP 66 IP 66
Operation duration 100 h 100 h 100 h 100 h
Self-levelling range ±5° ±5° ±5° ±5°
Automatic level yes yes yes yesmonitoring
LCD display yes yes yes yes
Scan function - - yes yes
Plumb beam - - yes yes
Laser receiver ACCEPTORpro yes - - -
Working range radio remote control - 150 m 150 m 150 m
Working range AutoAlign - - 50 m 50 m
Magnetic target board - - yes yes
Carefree package with yes yes yes yes3-year warranty
Ref.-No. 472 020 472 031 472 050 472 060
primus2 en.qxp 05.10.2011 09:21 Seite 8
www.merl
inlaz
er.co
m
ACCEPTORpro
Features:
y Extremely robust laser receiver
y Large detector field
y Large LC display on front and back
y Bright LED display
Technical data:
Accuracy switchable, ± 0.5 mm, ± 1.0 mm, ± 2.0 mm, ± 4.0 mm
Length of detector field 70 mmWorking range ø 700 m (depends on laser)Protection class IP 66Operating temperature -20°C to +50°CPower supply 3 x 1.5 V batteries (AA) or rechargeable
batteries (NiMH)Operation duration approx. 100 h Ref.-No. 430 372
Technical data:
Accuracy switchable, ± 0.5 mm, ± 1.0 mm, ± 2.0 mm ± 4.0 mm
Length of detector field 70 mmWorking range ø 500 m - 700 m (depends on laser)Protection class IP 66Operating temperature -20°C to +50°CPower supply 3 x 1.5 V batteries (AA) or rechargeable
batteries (NiMH)Operation duration approx. 100 h Ref.-No. 430 370 COMMANDER2 HVA
430 371 COMMANDER2 H2N430 373 COMMANDER2 HVA2N
Multi function module COMMANDER2
Features:
y Robust laser receiver with integratedradio remote control
y Large LC display on front and back
y Plain-language LCD display showingall the data of the PRIMUS2
display
y Bright LED display
y Adjustable volume
y Large detector field
y Display of remaining battery power
y Extremely robust
y Easy to handle
y Rod clamp for laser receiver
y Available for all PRIMUS2
models
y Made in Germany
Laser receiver for series
y Adjustable volume
y Display of remaining battery power
y Easy to handle
y Rod clamp for laser receiver
y Made in Germany
Laser receiver incl.
radio remote control
Extremely robust
laser receiver
Made i
n Germ
any
primus2 en.qxp 05.10.2011 09:22 Seite 9
www.merl
inlaz
er.co
m
Accessories
Outdoor package
y PRIMUS2 tripod with integrated Quick-Fix release, working range 1.07 m to 1.71 m
y Flexi Rod with universal adapter and carrying bag
Ref.-No. 200 350
Indoor package 1
y Elevating tripod, working range 0.80 m to 2.76 m
y Flexi Rod with universal adapter and carrying bag
Ref.-No. 210 350
Indoor package 2
y Elevating tripod, working range 0.78 m to 2.03 m
y Flexi Rod with universal adapter and carrying bag
Ref.-No. 210 351
PRIMUS2 Tripod
Sturdy aluminium tripod with integra-ted Quick-Fix locking system.
Ref.-No. 200 202
Telescopic sight Ref.-No. 461 096
Technical data:Min. effective height 1.07 mMax. effective height 1.71 mRetracted length 1.15 m Weight 5.00 kgTripod head Quick-Fix, l 140 mm
Supplementary rechargeable batteryset and battery compartment
Rechargeable battery add-on set for allPRIMUS2 models, incl. charger.
Ref.-No. 461 098
Additional battery compartment for PRIMUS2 models. (Without batteries)
Ref.-No. 461 097
Quick-Fix
All PRIMUS2 lasers are fitted withthe Quick-Fix adapter in addition to thestandard 5/8" connecting thread. Thismeans that the laser can be attached toand removed from the PRIMUS2
tripod in seconds using the integratedQuick-Fix system or a tripod retrofittedwith Quick-Fix. To attach or remove it,simply move the lever. That's it.
1 Place the laser
2 Push the lever
3 That’s it !
Quick-Fix
Quick-Fix system for retrofitting any commercially available tripod.
Ref.-No. 572 112
Set
+
+Set
Made in Germany
primus2 en.qxp 05.10.2011 09:25 Seite 10
www.merl
inlaz
er.co
m
Made i
n Germ
any
On modern construction sites the batter board isincreasingly being supplanted by a rotating laser. The laser is, in vertical operation, placed on a batterboard holder fastened to the batter board by a clam-ping screw. The batter board holder is provided with aturntable allowing rough alignment of the rotatinglaser.The laser receiver with the receiver holder is clampedon the opposite side of the batter board. Thanks to the AutoAlign function, the laser plane automatically aligns with the laser receiver COMMANDER2 in the case of the PRIMUS2 HVAand PRIMUS2 HVA2N models.Furthermore, the laser plane is automatically monitoredand if necessary corrected by the AutoAlign function.
Ideal for
AutoAlign
Batter board holder for rotating laserPRIMUS2
Ref.-No. 461 045
Facade Construction Adapters forPRIMUS2 Rotating Laser
Features:
y Distance of laser plane from the wall:Min. appr. 45 mm, max. appr. 490 mm
y Tube bubble
y 3 adjusting screws for precisealignment of the laser level
y mm and cm graduation on the support
Ref.-No. 461 046
Adjusting screws mm/cm graduation
Tube bubble
Facade Construction Adapters forCOMMANDER2 Laser Receiver
Features:
y Minimum 0-marke 60 mm away fromthe wall
y Maximum 0-marke 490 mm awayfrom the wall
y Tube bubble
y 3 adjusting screws for precisealignment of the laser level
y mm and cm graduation on the support
Ref.-No. 461 056
Adjusting screws
mm/cm graduation
Tube bubble
The Facade Construction Adapters are fastened to thewall and horizontally aligned with the aid of integratedbubbles. Thanks to the mm graduations provided onthe crosspieces, rotating lasers and laser receivers canbe conveniently positioned at the required distancefrom the wall. The new Facade Construction Adaptershave been optimally matched to the fully automaticPRIMUS2 HVA rotating laser with AutoAlign functionand to the COMMANDER2 laser receiver, and providein combination with these instruments a professionaland complete system for facade construction.
Batter board holder for laser receiverCOMMANDER2
Ref.No. 461 055
Accessories
primus2 en.qxp 05.10.2011 09:26 Seite 11
www.merl
inlaz
er.co
m
Nedo GmbH & Co. KGHochgerichtstrasse 39–43 · D-72280 DornstettenGermanyPhone +49/74 43/24 01-0 · Fax +49/74 43/24 01-45www.nedo.com · info@nedo.com
Prin
ted
in G
erm
any
02/
2011
N
P 32
1 01
0-EN
.
primus2 en.qxp 05.10.2011 09:26 Seite 12
www.merl
inlaz
er.co
m