Post on 29-Sep-2018
Kuhnke Technical Data
The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have been combined to provide technical information about the specific product(s) you have selected. Hard copy product catalogues, and CDROMs have been published describing Kuhnke Pneumatics, Solenoids, Relays and Electronics; some divided into different books. A list of current publications is available on this web site or from our sales offices. Some may be available for download, but as substantially larger files. Contact Details
Kuhnke sales and service in the UK H. Kuhnke Ltd Unit 6 Focus 303 Focus Way, Walworth Business Park Andover Hampshire SP10 5NY United Kingdom Tel: +44 (0)1264 364194 Fax: +44 (0)1264 365991 Email: sales@kuhnke.co.uk
Important Note The information shown in these documents is for guidance only. No liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper application of the parts, assemblies or equipment described.
Schaltzeichen nach DIN ISO 1219
Energieübertragung und -aufbereitung
Benennung Erklärung
Leitungs- Überquerung von Leitungen,kreuzung die nicht miteinander verbunden
sind
Entlüftungs-stelle
Auslassöffnung Ohne Vorrichtung für einen An-schluss
Mit Gewinde für einen Anschluss
Energie- Druckanschluss an Geräten undabnahmestelle Leitungen zur Energieentnahme
oder zu Messungen
Mit Verschlussstopfen
Mit Anschlussleitung
Schnell- Verbunden, ohne mechanischKupplungen öffnendes Rückschlagventil
Verbunden, mit mechanisch öff-nenden Rückschlagventilen
Entkuppelt, mit offenem Ende
Entkuppelt, durch federlosesRückschlagventil gesperrtes Ende
Flexible Zur Verbindung von bewegli-Leitungs- chen Teilenverbindung
Elektrische Leitung zur elektrischenLeitung Energieübertragung
Leitungs- Feste Verbindung, z. B. ge-verbindung schweißt, gelötet, geschraubt
(einschließlich Fittings und Ver-schraubungen)
Schalldämpfer
Behälter(Druckluft-speicher)
Symbol
Symbols in Accordance with DIN ISO 1219
Energy transfer and conditioning
Designation Explanation
Crossing Crossing of lines not connectedto each other
Exhaust pointor vent
Outlet port Without fixture for one connec-tion
With thread for one connection
Energy Pressure connection on devicestapping point and lines for tapping energy or
for measurements
With plug
With connecting line
Quick-acting Connected, without mechani-couplings cally opening check valve
Connected, with mechanicallyopening check valves
Uncoupled, with open end
Uncoupled, end blocked bycheck valve without spring
Flexible line For connecting moving partsconnection
Electrical lead Lead for transmitting electricalenergy
Line Fixed connection, e. g. welded,connection soldered, screwed (including
fittings and connectors)
Silencer
Vessel(air reservoir)
Technische Informationen
Konstruktionshilfen
Technical Information
Design Aids
4-9 Kuhnke Pneumatics CatalogueKuhnke Pneumatikkatalog
Energieübertragung und -aufbereitung
Benennung Erklärung
Filter Gerät zum Ausscheiden vonSchmutzteilen
Wasser- Handbetätigtabscheider
Mit automatischer Entleerung
Filter mit Dieses Gerät ist eine Kombina-Wasser- tion von Filter- und Wasserab-abscheider scheider
Handbetätigt
Mit automatischer Entleerung
Lufttrockner Gerät, in dem die Luft (z. B. mit-tels Chemikalien) getrocknetwird
Öler Gerät, in dem durchströmenderLuft ein geringer Ölstrom zurSchmierung angeschlossenerGeräte zugeführt wird
Manometer
Druckquelle
Arbeitsleitung Leitung zur Energieübertragung
Steuerleitung Leitung zur Übertragung derSteuerenergie (einstellen und re-geln eingeschlossen)
Abfluss- oder Leitung zur EntlüftungLeckleitung
Symbol
Energy transfer and conditioning
Designation Explanation
Filter Device for removing contami-nants
Water Manually operatedseparator
With automatic draining
Filter with water This device is a combination ofseparator filter and water separator
Manually operated
With automatic draining
Air drier Device in which the air is dried(e. g. by means of chemicals)
Lubircator Device in which a small amountof oil is added to the air flowingthrough for lubricating connec-ted devices
Pressure gauge
Pressure source
Working line Line for transferring energy
Control line Line for transmitting control(pilot line) energy (including adjusting and
regulating)
Exhaust or Line for exhaustingleakage line
Technische Informationen
Konstruktionshilfen
Technical Information
Design Aids
4-10 Kuhnke Pneumatics CatalogueKuhnke Pneumatikkatalog
Betätigungsarten
Benennung Erklärung
Muskelkraft- Allgemein (ohne Angabebetätigung der Betätigungsart)
Durch Druckknopf
Durch Hebel
Durch Pedal
Mechanische Durch Stößel oder TasterBetätigung
Durch Feder
Durch Rolle
Durch Rolle, nur in einer Rich-tung arbeitend (Leerrücklauf)
Pneumatische Direkt wirkend durch Druckbe-Betätigung aufschlagung
Durch Druckentlastung
Durch unterschiedliche Steuerflä-chen.In dem Symbol stellt das größe-re Rechteck die größere Steuer-fläche dar, das heißt, die vor-rangige Phase
Indirekte Betätigung vorgesteuert
Durch Druckbeaufschlagung desVorsteuerventils
Durch Druckentlastung des Vor-steuerventils
Elektrische Durch Elektro-MagnetBetätigung mit einer Wicklung
Mit zwei gleichsinnig wirkendenWicklungen
Mit zwei gegeneinander wirken-den Wicklungen
Kombinierte Durch Elektro-MagnetBetätigung und Vorsteuerventil
Durch Elektro-Magnet oder Vor-steuerventil
Raste Vorrichtung, die eine Vorgege-bene Stellung aufrecht erhält
Symbol
Types of control (actuators)
Designation Explanation
Manual General (without specifying typeoperation of control)
By pushbutton
By lever
By pedal
Mechanical By stem or keyactuation
By spring
By roller
By roller operating in one direc-tion only (idle return)
Pneumatic Direct action by application ofactuation pressure
By pressure relief
By different control surfaces.In the symbol the larger rec-tangle represents the larger con-trol surface, i. e. pressure do-minant pilot
Indirect actuation, piloted
By application of pressure to thepilot valve
By relieving the pressure on thepilot valve
Electrical By solenoid with one windingactuation
With two in-phase windings
With two opposing windings
Combined By solenoid with one valveactuation
By solenoid or pilot valve
Detent Device for maintaining a givenposition
Technische Informationen
Konstruktionshilfen
Technical Information
Design Aids
4-11 Kuhnke Pneumatics CatalogueKuhnke Pneumatikkatalog
Steuerventile
Benennung Erklärung
2/2-Wegeventil Zwei gesperrte Anschlüsse,Sperrstellung in Nullstellung
Ein Druchflussweg Druchfluss in Nullstellung
3/2-Wegeventil In 1. Schaltstellung Zulauf gesperrt, z. B. einfachwir-kender Zylinder entlüftet oder anRückflussleitung angeschlossen
In der 2. StellungEntlüftung oder Rückflussleitunggeschlossen, z. B. einfachwir-kender Zylinder belüftet
4/2-Wegeventil Mit zwei Durchflussstellungen, z. B. für doppeltwirkendeZylinder
5/2-Wegeventil Mit zwei Druchflussstellungen, z. B. für doppeltwirkendeZylinder
3/3-Wegeventil Mit Sperr-Nullstellung und 2Durchflussstellungen
4/3-Wegeventil Mit Umlauf-Nullstellungund 2 Durchflussstellungen
Mit Schwimm-Nullstellung und 2Durchflussstellungen
5/3-Wegeventil Mit Sperr-Nullstellung und 2Durchflussstellungen
Rückschlag- Unbelastetventil öffnet, wenn der Einlassdruck
höher ist als der Auslassdruck
Federbelastetöffnet, wenn der Einlassdruck hö-her ist als der Auslassdruck, ein-schließlich der Federanpresskraft
Wechselventil Die Einlassöffnung mit dem (ODER) höheren Druck ist automatisch
mit der Auslassöffnung verbun-den, während die andere Ein-lassöffnung verschlossen ist
Schnellent- Wenn die Einlassöffnung unbe-lüftungsventil aufschlagt ist, dann ist die Aus-
lassöffnung frei zur Atmosphäreentlüftet
Symbol
Control valves
Designation Explanation
2/2-way valve Two closed ports, closed positi-on in neutral position
One flow path flow in neutralposition
3/2-way valve In 1st switch position inlet is clo-sed (e. g. single acting cylinderis exhausted or connected to re-turn flow line)
In the 2nd position air is exhau-sted or the return flow line is clo-sed (e. g. single acting cylinderis supplied with air)
4/2-way valve With two open positions, e. g.for double acting cylindersWith one exhaust
5/2-way valve With two open positions, e. g.for double acting cylindersWith two exhausts
3/3-way valve With closed neutral positionand 2 open positions
4/3-way valve With rotating neutral positionand 2 open positions
With floating neutral positionand 2 open positions
5/3-way valve With closed neutral positionand 2 open positions
Check valve Unloaded opens when the inlet pressure ishigher than the outlet pressure
Spring-loadedopens when the inlet pressure ishigher than the outlet pressure,including the spring contact force
Shuttle valve The inlet port with the higher(OR type) pressure is automatically con-
nected to the outlet port, whilstthe other inlet port is closed
Quick-exhaust When the inlet port is notvalve supplied with air, the outlet port
is exhausted directly into the at-mosphere
Technische Informationen
Konstruktionshilfen
Technical Information
Design Aids
4-12 Kuhnke Pneumatics CatalogueKuhnke Pneumatikkatalog
Steuerventile
Benennung Erklärung
Drosselventil Mit verstellbarer Drosselung
Drossel-Rück- Drosselventil mit Druchfluss in schlagventil einer Richtung und konstanter(Rückschlag- Drosselung in der anderen Richt-ventil mit ungDrosselung)
Mit verstellbarer Drosselung
Folgeventil Ventil, das gegen die Federkraft(Zuschaltventil) durch Öffnen des Ausganges
den Weg zu weiteren Gerätenfreigibt
Druck-Regel- Ventil, das den Ausgangsdruckventil weitgehend konstant hält, auch
bei verändertem, aber höheremEingangsdruck
Ohne Abflussöffnung(Übersteuerungen werden nichtausgeglichen)
Mit Abflussöffnung(Übersteuerungen werden aus-geglichen)
Differenzdruck- Der Auslassdruck wird umRegelventil einen Festwert verringert, der
vom Einlassdruck abhängt
Absperrventil
Zweidruckventil Die Auslassöffnung führt nur(UND) Druck, wenn in beiden Einlas-
söffnungen Druck ansteht
Symbol
Control valves
Designation Explanation
Flow control With adjustable flow valve control
Flow control Flow control valve with flow invalve with one- one direction and constant flowway adjustment control in the other direction(check valve with flow control)
With adjustable flow control
Sequence valve Valve which, by opening the(priority valve) outlet against the spring force,
makes connection with furtherunits
Regulator Valve which to a large extentholds the outlet pressure at aconstant level, even with altered(higher) inlet pressure
Without exhaust (does not compensate for over-loads)
With exhaust (compensates for overloads)
Differential The outlet pressure is reduced pressure by a fixed value which is relatedregulator to the inlet pressure
Shut-off valve
Two pressure The outlet port is only pressur-valve ized when pressure is supplied(AND type) to both of the inlet ports
Technische Informationen
Konstruktionshilfen
Technical Information
Design Aids
4-13 Kuhnke Pneumatics CatalogueKuhnke Pneumatikkatalog
Energieumformung
Benennung Erklärung
Kompressor Mit konstantem Verdrängungsvo-lumen (nur eine Stromrichtung)
Pneumatischer Mit konstantem Verdrängungs-Motor volumen
Mit einer Stromrichtung
Mit zwei Stomrichtungen
Mit veränderlichem Verdrän-gungsvolumen
Mit einer Stromrichtung
Mit zwei Stromrichtungen
Schwenkmotor Pneumatisch(Druckluftmotor mit begrenztemSchwenkbereich)
Einfachwir- Zylinder, in denen derkender Zylinder Druck nur in ein und derselben
Richtung wirkt(für den Vorhub)
Rückhub durch nicht näher be-stimmte Kraft
Rückhub durch Feder
Doppeltwir- Zylinder, in denen der Druckkender Zylinder wahlweise in beiden Richtungen
wirkt (Vor- und Rückhub)
Mit einfacher Kolbenstange
Mit durchgehender Kolben-stange
Zylinder mit mit einfacher, nicht einstellbarerDämpfung Dämpfung (nur in einer Richtung
wirkend)
mit beidseitig, nicht einstellbarerDämpfung (in zwei Richtungenwirkend)
Mit einfacher, einstellbarerDämpfung
Mit beidseitiger, einstellbarerDämpfung
Symbol
Energy conversion
Designation Explanation
Compressor With constant displacement vo-lume (one direction of rotation only)
Pneumatic With constant displacementmotor volume
With one direction of rotation
With two directions of rotation
With variable displacement vo-lume
With one direction of rotation
With two directions of rotation
Oscillating Pneumaticmotor rotary Cylinder with Rotary Driveactuator limited range of oscillation
Single acting Cylinder in which the cylinder pressure only acts in one
direction(advance stroke)
Return stroke by non-defined force
Return stroke by spring
Double acting Cylinder in which the pressurecylinder may act in both directions
(advance and return strokes)
With single-ended piston rod
With double-ended piston rod
Cylinder with With non-adjustable cushioningcushioning at one end (only acts in one di-
rection)
With non-adjustable cushioningat both ends (acts in two directi-ons)
With cushioning adjustable atone end
With cushioning adjustable atboth ends
Technische Informationen
Konstruktionshilfen
Technical Information
Design Aids
4-14 Kuhnke Pneumatics CatalogueKuhnke Pneumatikkatalog