LINEAR TECHNOLOGY - HAMOTEK Österreich · le, strategic partners that we have built up in Europe...
Transcript of LINEAR TECHNOLOGY - HAMOTEK Österreich · le, strategic partners that we have built up in Europe...
UNITED COMPONENTS EUROPE
LINEARTECHNOLOGY
UN ITED COMPONENTS EUROPE
Hamotek Montagetechnik GmbH in Freilassing ist Anbieter für Maschinenbaukomponenten, die in den verschiedensten Industrie-zweigen eingesetzt werden.
Aufgrund langjähriger, intensiver Kundenkontakte und stetig wach-sender Projektanfragen aus Deutschland, wurde 2006 das Unter-nehmen in Süddeutschland gegründet.
Durch unsere langjährigen, persönlichen Kontakte außerhalb Europas entwickelte sich die Idee innovative Produkte exklusiv nach Europa zu importieren und zu vertreiben.
Dabei nutzen wir unser dichtes Netzwerk an strategischen und äußerst zuverlässigen Partnern welches wir im Laufe der Jahre in Europa aufgebaut haben. Diese handverlesenen Handelspartner gewährleisten unter unserer Führung ausgezeichneten Support und Prozesssicherheit auf sehr hohem Niveau.
Über 20 Jahre Erfahrung in dieser Branche sind der Garant für die erfolgreiche Abwicklung auch komplexer Projekte. Unsere schlan-ke Struktur ermöglicht uns, auch für Sonderprojekte schnell und effizient individuelle Lösungen zu finden. Unsere Kunden und deren individuellen Bedürfnisse stehen dabei immer im Vordergrund.
Kompetente Beratung, technisches Knowhow, Flexibilität und kurze Lieferzeiten sind bei uns keine leeren Schlagworte sondern gelebte Unternehmenskultur die auch Sie begeistern wird.
Wir freuen uns darauf Sie kennen zu lernen.
Hamotek Montagetechnik GmbH based in Freilassing is a supplier of mechanical engineering components that are used in a wide range of industries.
Based on long-standing, intensive contacts with our clients and continually growing project inquiries from Germany, we set up our company in Southern Germany in 2006.
Our personal contacts with suppliers outside Europe that we had developed over many years gave rise to the idea of importing and distributing innovative products in Europe exclusively.
To do this, we make use of our closely-knit network of highly reliab-le, strategic partners that we have built up in Europe over the years. These hand-picked trading partners ensure top-level support and process safety under our guidance.
More than 20 years‘ experience in this industry ensures the success-ful completion even of highly complex projects. Our slender structure enables us to find customised solutions also for one-of-a-kind projects. Our customers and their individual requirements are always at the centre of what we do.
For us, competent advice, technological know-how, flexibility and short delivery times are not just empty phrases, but stand for a real, vibrant company culture that we believe will also inspire you.
We are looking forward to meeting you!
HAMOTEK stellt sich vor HAMOTEK imagines
Dipl.-Ing.Alexander Kühnel
Ing.Oliver Hassler
UNITED COMPONENTS EUROPE
nelIng
UN ITED COMPONENTS EUROPE
3
INDEX
Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P 4
Ball Slide Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P 7
Anti-Creep Ball Slide Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P 10
Non-Magnetic Ball Slide Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . .P 13
Crossed Roller Slide Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P 16
Precision Series (Ball & Crossed Roller Slides) . . . . . . . . . . . . . . . . . . .P 19
High Precision Series (Ball & Crossed Roller Slides) . . . . . . . . . . . . . . .P 22
Mini Posi-Drive™Stages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P 27
Posi-Drive™Stages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P 37
Ball Slide Positioning Stages (Micrometer Driven) . . . . . . . . . . . . . . . . .P 44
Crossed Roller Positioning Stages (Micrometer Driven) . . . . . . . . . . . . .P 50
Ball & Crossed Roller Positioning Stages (Side Drive Micrometer) . . . .P 56
Low Profile Crossed Roller Slide Tables . . . . . . . . . . . . . . . . . . . . . . . . .P 62
Crossed Roller Rail Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P 65
Anti-Creep Crossed Roller Rail Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . .P 69
Crossed Roller Slide Tables (Aluminum) . . . . . . . . . . . . . . . . . . . . . . . . .P 72
Anti-Creep Crossed Roller Slide Tables (Aluminum) . . . . . . . . . . . . . . . .P 75
Crossed Roller Slide Tables (Steel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P 78
Recirculating Ball Slide Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P 81
Technical Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P 86
4
SelectionGuide
SERIES LOAD TRAVEL mm LENGTH mm ACCURACYCAPACITY, kg.
MINI CA .34 8.4 - 38.0 13.3 - 44 0.013mm/25mm
DA-SA3 1.8 - 93 13 - 304.0 27 - 381 0.013mm/25mm
(50 MODELS)
BALL SLIDES
SERIES LOAD TRAVEL mm LENGTH mm ACCURACYCAPACITY, kg.
RDA 14 - 41 13.0 - 127.0 27.0 - 154.0 0.003mm/25mm
REA-RSA3 22 - 354 13 - 305 27 - 381 0.003mm/25mm
(47 MODELS)
CROSSED ROLLER SLIDES
SERIES LOAD TRAVEL mm LENGTH mm ACCURACYCAPACITY, kg.
MA-2SS-SA5-7SS 5.4 - 77 25 - 175.0 65 - 228.6 0.003mm/25mm
(17 MODELS)
PRECISION BALL SLIDE SERIES
SERIES LOAD TRAVEL mm LENGTH mm ACCURACYCAPACITY, kg.
RSA2SS-RSA5SS 36 - 118 25 - 175 50.8 - 228.6 0.003mm/25mm
(12 MODELS)
PRECISION CROSSED ROLLER SLIDE SERIES
SERIES LOAD TRAVEL mm LENGTH mm ACCURACYCAPACITY, kg.
HPMA-HPSA5 3.6 - 102 13 - 250 25.4 - 381.0 0.001mm/25mm
(42 MODELS)
HIGH PRECISION SERIES BALL SLIDES (LOW PROFILE & FLANGE BASE)
ANTI-CREEP BALL SLIDE ASSEMBLIESSERIES LOAD TRAVEL mm LENGTH mm ACCURACY
CAPACITY, kg.DA-AC-SA3-AC 1.8 - 93 13 - 304.0 27 - 381 0.013mm/25mm
NON-MAGNETIC BALL SLIDES
pg 13
pg 10
pg 16
pg 19
pg 21
pg 23
pg 7
DA-NMS-SA3-NMS .54 - 28 13 - 304.0 27 - 381 0.013mm/25mm
(47 MODELS)
SERIES LOAD TRAVEL LENGTH ACCURACYCAPACITY, kg.
5
SelectionGuide
SERIES LOAD TRAVEL mm LENGTH mm ACCURACYCAPACITY, kg.
HPRSA2-HPRSA5 41 - 204 25 - 250 50.8 - 381.00.010mm/25mm (34 MODELS)
HIGH PRECISION SERIES CROSSED ROLLER SLIDES (LOW PROFILE & FLANGE BASE)
LSA1-25-C005 3.6 - 41 25 - 300 103.4 - 549.0 0.003mm/25mm
THRU LSA3-300-B02(36 MODELS)
LRSA1-25-C005 6.8 - 82 25 - 300 103.4 - 549.0 0.003mm/25mm
THRU LRSA3-300-B02(36 MODELS)
POSI-DRIVE STAGES
SERIES LOAD CAPACITY, kg. TRAVEL mm WORK ACCURACYX, XY, Z SURFACE
R99MM 18, 18, .57 6 19.1 x 19.1 0.003mm/25mm
R101MM-R3204MM 10-73, 10-73, .6-14 13 - 50 31.8 x 31.8 to 0.003mm/25mm
(25 MODELS, with micrometers) 130.2 x 130.2
R101PMM-R3204PMM 10 - 73 13 - 100 31.8 x 31.8 to 0.003mm/25mm
(11 MODELS, X and XY ONLY, no micrometers) 130.2 x 130.2
CROSSED ROLLER POSITIONING STAGES (MICROMETER DRIVEN)
SERIES LOAD CAPACITY, kg. TRAVEL mm WORK ACCURACYX, XY, Z SURFACE
MINI 99MM 2.3, 2.3, .6 6 19.1 X 19.1 0.013mm/25mm
101MM-3204MM 1.8-27, 1.8-27, .6-14 13 - 50 31.8 x 31.8 to 0.013mm/25mm
(25 MODELS, with micrometers) 130.2 x 130.2
101PMM-3206-PMM 1.8 - 27 13 - 100 31.8 x 31.8 to 0.013mm/25mm
(11 MODELS, X and XY ONLY, no micrometers) 130.2 x 130.2
BALL SLIDE POSITIONING STAGES (MICROMETER DRIVEN)
Available in X, XY, and XYZ configurations.
Available in X, XY, and XYZ configurations.
SERIES LOAD TRAVEL mm LENGTH mm ACCURACYCAPACITY, kg.
pg 25
pg 27
pg 44
pg 50
6
SERIES LOAD TRAVEL mm LENGTH mm ACCURACYCAPACITY, kg.
LPTA-1025-3205 23 - 375 .2 - 130 25 - 205 .003mm/25mm
(21 MODELS) Stainless steel available.
LOW PROFILE CROSSED ROLLER TABLES
SERIES LOAD TRAVEL mm LENGTH mm ACCURACYCAPACITY, kg.
MINI NB1 20 - 84 12 - 50 20 - 80 .002mm/25mm
NB2-NB6 30 - 1280 18 - 295 30 - 400 .002mm/25mm to(49 MODELS) .005mm/25mm
Stainless steel available.
CROSSED ROLLER RAIL SETS
SERIES LOAD TRAVEL mm LENGTH mm ACCURACYCAPACITY, kg.
MINI NBT-1AM 44 - 90 25 - 76 50 - 125 .003mm/25mm
NBT-2AM-NBT-6AM 30 - 923 18 - 229 35 - 360 .003mm/25mm
(72 MODELS)Stainless steel available.
CROSSED ROLLER SLIDE TABLES (ALUMINUM)
SERIES LOAD TRAVEL mm LENGTH mm ACCURACYCAPACITY, kg.
MINI NBT-1 12 - 40 12 - 50 25 - 85 .002mm
NBT-2-NBT-6 40 - 1199 18 - 230 35 - 325 .002mm to (41 MODELS) .004mm
CROSSED ROLLER SLIDE TABLES (STEEL)
SERIES LOAD TRAVEL mm LENGTH mm ACCURACYCAPACITY, kg.
BSGS5-BSG25 44 - 1001 3 - 813 38 - 889 .002mm
BSGS9W-BSG16W 250 - 720 51 - 610 76 - 660 .013mm
(10 MODELS) Stainless steel available.
BALL SLIDE GUIDES
SelectionGuide
SERIES LOAD TRAVEL LENGTH ACCURACYCAPACITY, Kg.
NB2-AC / NB6-AC 30-1280 18-275 30-400 .002mm/25mm
.005mm/25mm
(32 MODELS)
ANTI-CREEP CROSSED ROLLER RAIL SETS
SERIES LOAD TRAVEL LENGTH ACCURACYCAPACITY, LB.
MINI NBTA1-AC 43-89 25-70 50-125 .003mm/25mm
NBT2A-AC / NBT6A-AC 30-924 18-230 35-360 .003mm/25mm
(31 MODELS)
ANTI-CREEP CROSSED ROLLER SLIDE TABLES (ALUMINUM)
pg 62
pg 65
pg 69
pg 72
pg 75
pg 78
pg 81
7
6 Reasons to chooseDel-Tron® Ball Slides
Del-Tron®
Ball SlidesLoad Ratings and Life EstimatesThe rated load capacity of Del-Tron® ballslides may be a mass load on a horizontalslide,or a force load normal to the mountingsurface in any position. The rated load mustbe centered and distributed over the slide,and the base must be fully supported on aflat mounting surface so that the ball slidedoes not act as a beam subject toconcentrated or distributed bending forces.Loads supported by protruding arms reduceaccuracy and load capacity by acting aslevers or ratio arms, and should be avoidedeven when load forces are small.
When used at the rated load capacity andmoderate speeds, a life of 25 million cm oftravel can be expected. The expected life atone half the rated load is 250 million cm.
Friction and LubricationThe coefficient of friction is lower for linearball bearings than for rotary bearings, wherethe peripheral track is shorter on the innerrace than on the outer race, causing the ballto skid on one or the other. The balls runexactly equal distances on the pair of tracksin linear bearings, permitting the ball to runwithout friction, wear, or skidding at any preload. The typical coefficient of friction forDel-Tron® ball slides is 0.003.
Del-Tron® ball slides are self cleaning in normal service. Lubrication is recommendedfor speeds above 4500 cm/min, and isadvisable at lower speeds where high loadsare applied in continuous duty applications.
Mounting and AccuracyThe mounting surfaces of the ball slide aremachined flat and smooth, and parallel toeach other and the line of motion. They mustbe mounted on smooth, flat supports that willnot deflect under load. Especially with longslides of small cross section, binding may becaused by distortion of the bottom memberwhen mounted on irregular surfaces. If so,round shims or spacers may be placed overthe mounting screws to raise the slide abovethe surface asperities. Bedding in epoxy resinis also recommended.
The specified accuracy for all standard Del-Tron® ball slides is .013mm/25mm oftravel. This is measured by comparison ofthe line of travel to a master straight edge,using a gage or indicator mounted on theslide.
Ball Slides
1. Factory preload adjustment preventssideplay and backlash.
2. Lightweight aluminum carriage andbase with high load capacity.
3. Built-in holes simplify installationand component mounting.
4. Steel shafts, ground over the entirelength, reduce coefficient of frictionto 0.003.
5. Long life, self cleaning ball bearingneeds no lubrication.
6. Mounting surfaces, parallel to theline of motion, provide straight lineaccuracy to .013mm/25mm of travel.
8
Ball SlideAssemblies
* Minimum Centered around Mean Position
CA-.5
CA-1
CA-2
CA-3
DA-1
DA-2
DA-3
DA-4
DA-5
DA-6
EA-1
EA-2
EA-3
EA-4
EA-5
EA-6
MA-1
MA-2
MA-2.5
MA-3
MA-4
8.4
13
25
38
13
25
50
75
100
127
13
25
50
75
100
127
13
25
38
50
75
.34
.68
.68
.68
2
4
5
6
8
8
4
5
5
6
7
8
5
5
6
7
8
2
3
4
7
9
14
23
31
34
43
11
26
37
48
60
71
34
48
54
62
142
13.3
19.0
32.0
44.0
27.0
52.0
78.0
103.0
128.0
154.0
27.0
52.0
78.0
103.0
128.0
154.0
40.0
65.0
78.0
90.0
116.0
5.8
5.8
5.8
5.8
8.0
8.0
8.0
8.0
8.0
8.0
10.4
10.4
10.4
10.4
10.4
10.4
12.7
12.7
12.7
12.7
12.7
9.7
9.7
9.7
9.7
14.2
14.2
14.2
14.2
14.2
14.2
19.0
19.0
19.0
19.0
19.0
19.0
25.4
25.4
25.4
25.4
25.4
6.0
13.0
26.0
37.0
15.0
41.0
66.0
92.0
117.0
142.0
15.0
41.0
66.0
92.0
117.0
142.0
32.0
57.0
65.0
82.0
108.0
4.0
4.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
9.0
9.0
9.0
9.0
9.0
9.0
10.0
10.0
10.0
10.0
10.0
3.4
3.4
3.4
3.4
4.7
4.7
4.7
4.7
4.7
4.7
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
4.0
4.0
4.0
4.0
6.4
6.4
6.4
6.4
6.4
6.4
9.5
9.5
9.5
9.5
9.5
9.5
12.7
12.7
12.7
12.7
12.7
6.0
10.0
20.0
30.0
19.0
35.0
60.0
86.0
89.0
114.0
19.0
35.0
60.0
86.0
89.0
114.0
32.0
57.0
65.0
82.0
108.0
MODEL TRAVEL*
LOADCAPACITY
(kg)WEIGHT
(g)LENGTH
AHEIGHT
BWIDTH
CHEIGHT
FWIDTH
G
HOLESPACING
H
CARRIAGEHOLE
SPACING
D E
BASE DIMENSIONS
SERIESCARRIAGE
4 HOLES (I)BASE HOLE d
BASE HOLE D1BASE HOLE h
COUNTER BORESCREW SIZE
CAM2
THREADM2 THREAD
--
N/A
DAM2
THREAD2.24.02.2
M2
EAM3
THREAD3.56.13.4
M3
MAM4
THREAD3.56.13.4
M3
NAM4
THREAD4.68.14.4
M4
SA1M4
THREAD4.68.14.4
M4
SA2M4
THREAD4.68.14.4
M4
SA3M5
THREAD5.8105.3
M5
BD1
C
E
G
I
Fh
d
A
D
H
Dimensions in mm
moment load ratings + load / life formulas. pg.91
9
SPECIFICATIONS:
Straight Line Accuracy.013mm/25mm of travel
Positional Repeatability.005mm
FinishClear anodize standardBlack anodize available atno extra cost.
Coefficient of Friction0.003 typical
ConstructionAluminum carriage and base,hardened steel shafts and balls,mild steel end caps.
MODELSA3-6SA3-9SA3-12
# OF HOLES** 6** 8** 10
NA-1
NA-2
NA-3
NA-4
NA-6
NA-8
NA-10
SA1-1
SA1-2
SA1-3
SA1-3.5
SA1-4
SA1-6
SA1-8
SA2-1
SA2-1.5
SA2-2
SA2-3
SA2-4
SA2-6
SA2-8
SA3-1
SA3-1.5
SA3-2
SA3-3
SA3-4
SA3-5
SA3-6
SA3-9
SA3-12
19
38
50
75
100
150
200
25
50
75
88
100
150
200
25
38
50
75
100
150
200
25
38
50
75
100
127
150
228
304
7
8
9
11
14
16
18
7
9
11
14
16
20
25
9
14
19
24
27
34
41
14
16
28
40
54
61
68
84
93
37
65
85
147
170
198
227
82
122
170
190
232
261
326
113
170
184
227
335
445
553
283
283
425
590
771
879
498
1318
1644
40.0
65.0
90.0
116.0
152.0
203.0
254.0
51.0
76.0
102.0
127.0
152.0
203.0
254.0
51.0
70.0
83.0
102.0
152.0
203.0
254.0
67.0
67.0
102.0
127.0
152.0
203.0
229.0
305.0
381.0
13.4
13.4
13.4
13.4
13.4
13.4
13.4
15.8
15.8
15.8
15.8
15.8
15.8
15.8
19.0
19.0
19.0
19.0
19.0
19.0
19.0
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
26.9
26.9
26.9
26.9
26.9
26.9
26.9
38.0
38.0
38.0
38.0
38.0
38.0
38.0
44.0
44.0
44.0
44.0
44.0
44.0
44.0
66.5
66.5
66.5
66.5
66.5
66.5
66.5
66.5
66.5
32.0
57.0
82.0
102.0
140.0
190.0
240.0
35.0
60.0
85.0
110.0
136.0
186.0
238.0
35.0
55.0
65.0
85.0
140.0
190.0
240.0
54.0
42.0
75.0
100.0
125.0
175.0
**75.0
**75.0
**75.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
7.9
7.9
7.9
7.9
7.9
7.9
7.9
8.6
8.6
8.6
8.6
8.6
8.6
8.6
10.2
10.2
10.2
10.2
10.2
10.2
10.2
15.9
15.9
15.9
15.9
15.9
15.9
15.9
15.9
15.9
12.7
12.7
12.7
12.7
12.7
12.7
12.7
19.0
19.0
19.0
19.0
19.0
19.0
19.0
22.2
22.2
22.2
22.2
22.2
22.2
22.2
38.1
38.1
38.1
38.1
38.1
38.1
38.1
38.1
38.1
28.0
54.0
79.0
82.0
102.0
127.0
178.0
37.0
60.0
85.0
85.0
100.0
128.0
178.0
38.0
55.0
65.0
85.0
100.0
126.0
178.0
54.0
42.0
75.0
100.0
125.0
187.0
178.0
254.0
330.0
MODEL TRAVEL
LOADCAPACITY
(kg)WEIGHT
(g)LENGTH
AHEIGHT
BWIDTH
C
CARRIAGEHOLE
SPACINGD E
HEIGHTF
WIDTHG
HOLESPACING
H
BASE DIMENSIONS*Minimum Centered around Mean Position
Dimensions in mm
moment load ratings + load / life formulas. pg.91
10
6 Reasons to chooseDel-Tron® Anti-Creep™™
Ball Slides
Del-Tron®
Anti-Creep™™ SlidesIn certain applications, uneven loads, improperpreload, vertical mounting, or offset forces maycause the ball retainers to become misalignedrelative to each other. The misalignment (“creep”)can ultimately cause a reduction in overall travel,the need for increased force to achieve full traveland even failure of the assembly.
Del-Tron’s® Anti-Creep™ retainer design preventsthese problems. The single piece retainer andintegral positive end stops prevent ball retainermisalignment and help keep the rolling elementscentered in the assembly. The retainer is molded ofengineering plastic and slotted in the center. Dowelpins mounted in the base and carriage limit thetravel of the retainer and help to keep it centered inthe slide for full travel and extended life. Inapplications in which retainer misalignment is aconcern, Del-Tron® Anti-Creep™ slides demonstrategreatly increased life and improved performance.Anti-Creep™ slides have been extensively tested inDel-Tron’s internal testing facility and successfullyused in the field for over seven years. If you areconcerned that your application may induceuneven loads or forces or if the need for a slideoperating vertically exists, consider Del-Tron’s®
Anti-Creep™ retainer design.
Anti-Creep Linear Slides
1. Ideal for vertical applications
2. Increased life with overhanging loads
3. Positive internal stops
4. Low friction, straight line design
5. Factory preload controls side play andbacklash
6. .013mm/25m″″ straight line accuracy
11
Anti-Creep LinearSlides
* Minimum Centered around Mean Position
CA-1AC
CA-2AC
CA-3AC
DA-1AC
DA-2AC
DA-3AC
DA-4AC
DA-5AC
DA-6AC
EA-1AC
EA-2AC
EA-3AC
EA-4AC
EA-5AC
EA-6AC
MA-1AC
MA-2AC
MA-2.5AC
MA-3AC
MA-4AC
13
25
38
13
25
50
75
100
127
13
25
50
75
100
127
13
25
38
50
75
.68
.68
.68
2
4
5
6
8
8
4
5
5
6
7
8
5
5
6
7
8
3
4
7
9
14
23
31
34
43
11
26
37
48
60
71
34
48
54
62
142
19.0
32.0
44.0
27.0
52.0
78.0
103.0
128.0
154.0
27.0
52.0
78.0
103.0
128.0
154.0
40.0
65.0
78.0
90.0
116.0
5.8
5.8
5.8
8.0
8.0
8.0
8.0
8.0
8.0
10.4
10.4
10.4
10.4
10.4
10.4
12.7
12.7
12.7
12.7
12.7
9.7
9.7
9.7
14.2
14.2
14.2
14.2
14.2
14.2
19.0
19.0
19.0
19.0
19.0
19.0
25.4
25.4
25.4
25.4
25.4
13.0
26.0
37.0
15.0
41.0
66.0
92.0
117.0
142.0
15.0
41.0
66.0
92.0
117.0
142.0
32.0
57.0
65.0
82.0
108.0
4.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
9.0
9.0
9.0
9.0
9.0
9.0
10.0
10.0
10.0
10.0
10.0
3.4
3.4
3.4
4.7
4.7
4.7
4.7
4.7
4.7
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
4.0
4.0
4.0
6.4
6.4
6.4
6.4
6.4
6.4
9.5
9.5
9.5
9.5
9.5
9.5
12.7
12.7
12.7
12.7
12.7
10.0
20.0
30.0
19.0
35.0
60.0
86.0
89.0
114.0
19.0
35.0
60.0
86.0
89.0
114.0
32.0
57.0
65.0
82.0
108.0
MODEL TRAVEL*
LOADCAPACITY
(kg)WEIGHT
(g)LENGTH
AHEIGHT
BWIDTH
CHEIGHT
FWIDTH
G
HOLESPACING
H
CARRIAGEHOLE
SPACING
D E
BASE DIMENSIONS
SERIESCARRIAGE
4 HOLES (I)BASE HOLE d
BASE HOLE D1BASE HOLE h
COUNTER BORESCREW SIZE
CAM2
THREADM2 THREAD
--
N/A
DAM2
THREAD2.24.02.2
M2
EAM3
THREAD3.56.13.4
M3
MAM4
THREAD3.56.13.4
M3
NAM4
THREAD4.68.14.4
M4
SA1M4
THREAD4.68.14.4
M4
SA2M4
THREAD4.68.14.4
M4
SA3M5
THREAD5.8105.3
M5
BD1
C
E
G
I
Fh
d
A
D
H
Dimensions in mm
moment load ratings + load / life formulas. pg.91
12
SPECIFICATIONS:
Straight Line Accuracy0.13mm/25mm of travel
Positional Repeatability.005mm
FinishClear anodize standardblack anodize available atno extra cost.
Coefficient of Friction0.003 typical
ConstructionAluminum carriage and base,hardened steel shafts and balls,mild steel end caps.
MODELSA3-6ACSA3-9ACSA3-12AC
# OF HOLES** 6** 8** 10
NA-1AC
NA-2AC
NA-3AC
NA-4AC
NA-6AC
NA-8AC
NA-10AC
SA1-1AC
SA1-2AC
SA1-3AC
SA1-3.5AC
SA1-4AC
SA1-6AC
SA1-8AC
SA2-1AC
SA2-1.5AC
SA2-2AC
SA2-3AC
SA2-4AC
SA2-6AC
SA2-8AC
SA3-1AC
SA3-1.5AC
SA3-2AC
SA3-3AC
SA3-4AC
SA3-5AC
SA3-6AC
SA3-9AC
SA3-12AC
19
38
50
75
100
150
200
25
50
75
88
100
150
200
25
38
50
75
100
150
200
25
38
50
75
100
127
150
228
304
7
8
9
11
14
16
18
7
9
11
14
16
20
25
9
14
19
24
27
34
41
14
16
28
40
54
61
68
84
93
37
65
85
147
170
198
227
82
122
170
190
232
261
326
113
170
184
227
335
445
553
283
283
425
590
771
879
498
1318
1644
40.0
65.0
90.0
116.0
152.0
203.0
254.0
51.0
76.0
102.0
127.0
152.0
203.0
254.0
51.0
70.0
83.0
102.0
152.0
203.0
254.0
67.0
67.0
102.0
127.0
152.0
203.0
229.0
305.0
381.0
13.4
13.4
13.4
13.4
13.4
13.4
13.4
15.8
15.8
15.8
15.8
15.8
15.8
15.8
19.0
19.0
19.0
19.0
19.0
19.0
19.0
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
26.9
26.9
26.9
26.9
26.9
26.9
26.9
38.0
38.0
38.0
38.0
38.0
38.0
38.0
44.0
44.0
44.0
44.0
44.0
44.0
44.0
66.5
66.5
66.5
66.5
66.5
66.5
66.5
66.5
66.5
32.0
57.0
82.0
102.0
140.0
190.0
240.0
35.0
60.0
85.0
110.0
136.0
186.0
238.0
35.0
55.0
65.0
85.0
140.0
190.0
240.0
54.0
42.0
75.0
100.0
125.0
175.0
*75.0
*75.0
*75.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
7.9
7.9
7.9
7.9
7.9
7.9
7.9
8.6
8.6
8.6
8.6
8.6
8.6
8.6
10.2
10.2
10.2
10.2
10.2
10.2
10.2
15.9
15.9
15.9
15.9
15.9
15.9
15.9
15.9
15.9
12.7
12.7
12.7
12.7
12.7
12.7
12.7
19.0
19.0
19.0
19.0
19.0
19.0
19.0
22.2
22.2
22.2
22.2
22.2
22.2
22.2
38.1
38.1
38.1
38.1
38.1
38.1
38.1
38.1
38.1
28.0
54.0
79.0
82.0
102.0
127.0
178.0
37.0
60.0
85.0
85.0
100.0
128.0
178.0
38.0
55.0
65.0
85.0
100.0
126.0
178.0
54.0
42.0
75.0
100.0
125.0
187.0
178.0
254.0
330.0
MODEL TRAVEL*
LOADCAPACITY
(kg)WEIGHT
(g)LENGTH
AHEIGHT
BWIDTH
C
CARRIAGEHOLE
SPACINGD E
HEIGHTF
WIDTHG
HOLESPACING
H
BASE DIMENSIONS*Minimum Centered around Mean Position
moment load ratings + load / life formulas. pg.91
13
6 Reasons to chooseDel-Tron® Non-MagneticBall Slides
Del-TronBall SlidesLoad Ratings and Life EstimatesThe rated load capacity of Del-Tron ball slidesmay be a mass load on a horizontal slide,or aforce load normal to the mounting surface inany position. The rated load must be centered and distributed over the slide, andthe base must be fully supported on a flatmounting surface so that the ball slide doesnot act as a beam subject to concentrated ordistributed bending forces. Loads supportedby protruding arms reduce accuracy and loadcapacity by acting as levers or ratio arms,and should be avoided even when loadforces are small.
When used at the rated load capacity andmoderate speeds, a life of 10 million inches oftravel can be expected.The expected life atone half the rated load is 100 million inches.
Friction and LubricationThe coefficient of friction is lower for linearball bearings than for rotary bearings, wherethe peripheral track is shorter on the innerrace than on the outer race, causing the ballto skid on one or the other. The balls runexactly equal distances on the pair of tracksin linear bearings, permitting the ball to runwithout friction, wear, or skidding at any preload.The typical coefficient of friction forDel-Tron® ball slides is 0.003.
Lubrication is recommended for speedsabove 1800 inches/min, and is advisable atlower speeds where high loads are applied incontinuous duty applications.
Mounting and AccuracyThe mounting surfaces of the ball slide aremachined flat and smooth, and parallel toeach other and the line of motion. They mustbe mounted on smooth, flat supports that willnot deflect under load. Especially with longslides of small cross section, binding may becaused by distortion of the bottom memberwhen mounted on irregular surfaces. If so,round shims or spacers may be placed overthe mounting screws to raise the slide abovethe surface asperities. Bedding in epoxy resinis also recommended.
The specified accuracy for all standard Del-Tron ball slides is .0005inch/inch of travel.This is measured by comparison of the line oftravel to a master straight edge, using a gageor indicator mounted on the slide.
Non-Magnetic Linear Slides
1. Non-Magnetic lightweight design.
2. Silicon nitride ceramic ball bearings,titanium shafts, aluminum carriageand base, brass fasteners.
3. Factory preload minimizes side playand provides low friction.
4. Self cleaning ball bearing designoffers long life and requires nolubrication.
5. Standard mounting holes simplifyinstallation.
6. Mounting surfaces, parallel to theline of motion, provide straight lineaccuracy to 0.013mm/25mm oftravel.
®
14
Non-MagneticLinear Ball Slides
* Minimum Centered around Mean Position
DA-1-NMS
DA-2-NMS
DA-3-NMS
DA-4-NMS
DA-5-NMS
DA-6-NMS
EA-1-NMS
EA-2-NMS
EA-3-NMS
EA-4-NMS
EA-5-NMS
EA-6-NMS
MA-1-NMS
MA-2-NMS
MA-2.5-NMS
MA-3-NMS
MA-4-NMS
13
25
50
75
100
127
13
25
50
75
100
127
13
25
38
50
75
.5
1.1
1.6
1.9
2.2
2.5
1.1
1.4
1.6
1.9
2.2
2.5
1.4
1.6
1.8
2.1
2.5
9
14
23
31
34
43
11
26
37
48
60
71
34
48
54
62
142
27.0
52.0
78.0
103.0
128.0
154.0
27.0
52.0
78.0
103.0
128.0
154.0
40.0
65.0
78.0
90.0
116.0
8.0
8.0
8.0
8.0
8.0
8.0
10.4
10.4
10.4
10.4
10.4
10.4
12.7
12.7
12.7
12.7
12.7
14.2
14.2
14.2
14.2
14.2
14.2
19.0
19.0
19.0
19.0
19.0
19.0
25.4
25.4
25.4
25.4
25.4
15.0
41.0
66.0
92.0
117.0
142.0
15.0
41.0
66.0
92.0
117.0
142.0
32.0
57.0
65.0
82.0
108.0
6.0
6.0
6.0
6.0
6.0
6.0
9.0
9.0
9.0
9.0
9.0
9.0
10.0
10.0
10.0
10.0
10.0
4.7
4.7
4.7
4.7
4.7
4.7
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.4
6.4
6.4
6.4
6.4
6.4
9.5
9.5
9.5
9.5
9.5
9.5
12.7
12.7
12.7
12.7
12.7
19.0
35.0
60.0
86.0
89.0
114.0
19.0
35.0
60.0
86.0
89.0
114.0
32.0
57.0
65.0
82.0
108.0
MODEL TRAVEL*
LOADCAPACITY
(kg)WEIGHT
(g)LENGTH
AHEIGHT
BWIDTH
CHEIGHT
FWIDTH
G
HOLESPACING
H
CARRIAGEHOLE
SPACING
D E
BASE DIMENSIONS
SERIESCARRIAGE
4 HOLES (I)BASE HOLE d
BASE HOLE D1BASE HOLE h
COUNTER BORESCREW SIZE
DAM2
THREAD2.24.02.2
M2
EAM3
THREAD3.56.13.4
M3
MAM4
THREAD3.56.13.4
M3
NAM4
THREAD4.68.14.4
M4
SA1M4
THREAD4.68.14.4
M4
SA2M4
THREAD4.68.14.4
M4
SA3M5
THREAD5.8105.3
M5
BD1
C
E
G
I
Fh
d
A
D
H
Dimensions in mm
15
SPECIFICATIONS:
Straight Line Accuracy.013mm/25mm of travel
Positional Repeatability.005mm
FinishClear anodize standardBlack anodize available atno extra cost.
Coefficient of Friction0.003 typical
ConstructionSilicon nitride ceramic ballbearings, titanium shafts,aluminum carriage base andend caps, brass fasteners.
MODELSA3-6SA3-9SA3-12
# OF HOLES** 6** 8** 10
NA-1-NMS
NA-2-NMS
NA-3-NMS
NA-4-NMS
NA-6-NMS
NA-8-NMS
NA-10-NMS
SA1-1-NMS
SA1-2-NMS
SA1-3-NMS
SA1-3.5-NMS
SA1-4-NMS
SA1-6-NMS
SA1-8-NMS
SA2-1-NMS
SA2-1.5-NMS
SA2-2-NMS
SA2-3-NMS
SA2-4-NMS
SA2-6-NMS
SA2-8-NMS
SA3-1-NMS
SA3-1.5-NMS
SA3-2-NMS
SA3-3-NMS
SA3-4-NMS
SA3-5-NMS
SA3-6-NMS
SA3-9-NMS
SA3-12-NMS
2.1
2.5
2.7
3.4
4.1
4.8
5.4
2.1
2.7
3.4
4.1
4.8
6.1
7.5
2.7
4.1
5.7
7.0
8.2
10.2
12.3
4.1
4.8
8.5
12.0
16.1
18.4
20.5
25.2
28.0
37
65
85
147
170
198
227
82
122
170
190
232
261
326
113
170
184
227
335
445
553
283
283
425
590
771
879
498
1318
1644
40.0
65.0
90.0
116.0
152.0
203.0
254.0
51.0
76.0
102.0
127.0
152.0
203.0
254.0
51.0
70.0
83.0
102.0
152.0
203.0
254.0
67.0
67.0
102.0
127.0
152.0
203.0
229.0
305.0
381.0
13.4
13.4
13.4
13.4
13.4
13.4
13.4
15.8
15.8
15.8
15.8
15.8
15.8
15.8
19.0
19.0
19.0
19.0
19.0
19.0
19.0
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
26.9
26.9
26.9
26.9
26.9
26.9
26.9
38.0
38.0
38.0
38.0
38.0
38.0
38.0
44.0
44.0
44.0
44.0
44.0
44.0
44.0
66.5
66.5
66.5
66.5
66.5
66.5
66.5
66.5
66.5
32.0
57.0
82.0
102.0
140.0
190.0
240.0
35.0
60.0
85.0
110.0
136.0
186.0
238.0
35.0
55.0
65.0
85.0
140.0
190.0
240.0
54.0
42.0
75.0
100.0
125.0
175.0
**75.0
**75.0
**75.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
7.9
7.9
7.9
7.9
7.9
7.9
7.9
8.6
8.6
8.6
8.6
8.6
8.6
8.6
10.2
10.2
10.2
10.2
10.2
10.2
10.2
15.9
15.9
15.9
15.9
15.9
15.9
15.9
15.9
15.9
12.7
12.7
12.7
12.7
12.7
12.7
12.7
19.0
19.0
19.0
19.0
19.0
19.0
19.0
22.2
22.2
22.2
22.2
22.2
22.2
22.2
38.1
38.1
38.1
38.1
38.1
38.1
38.1
38.1
38.1
28.0
54.0
79.0
82.0
102.0
127.0
178.0
37.0
60.0
85.0
85.0
100.0
128.0
178.0
38.0
55.0
65.0
85.0
100.0
126.0
178.0
54.0
42.0
75.0
100.0
125.0
187.0
178.0
254.0
330.0
MODEL TRAVEL
LOADCAPACITY
(kg)WEIGHT
(g)LENGTH
AHEIGHT
BWIDTH
C
CARRIAGEHOLE
SPACINGD E
HEIGHTF
WIDTHG
HOLESPACING
H
BASE DIMENSIONS*Minimum Centered around Mean Position
Dimensions in mm
19
38
50
75
100
150
200
25
50
75
88
100
150
200
25
38
50
75
100
150
200
25
38
50
75
100
127
150
228
304
16
1. Positive stops prevent overtravel.
2. Rollers improve load capacity 8-10times that of balls.
3. Precision ground shafts providestraight line accuracy of .003mmper 25mm of travel.
4. Alternately crossed rollers handleforce in any direction.
5. Lightweight aluminum carriage andbase.
6. Interchangeable with many types ofball slides.
6 Reasons to chooseDel-Tron® CrossedRoller Slides
Del-Tron®
Crossed RollerSlidesDel-Tron’s new series of crossed roller slides,offer designers additional flexibility in theirchoice of ready to install components forprecision linear transfer.
Our crossed roller slides, when compared toour ball slide products of equal size, offerhigher load carrying capacity and, whenoperating at high cycling rates or with shockand overhanging loads, improved performance. Most importantly, our crossedroller slides provide high accuracy,.003mm/25mm of travel, and repeatability,.003mm, exceeding our precision ball slides.Although crossed roller slides cost more thanequivalent size ball slides, their overallperformance, especially in applications whereheavy loads must be moved in compactassemblies, often justifies selection.
OperationCrossed roller slides physically resembleball slides except for the bearing design.Specifically, each slide is comprised of analuminum carriage straddling an aluminumbase. Using a bearing system containingcylindrical steel rollers, the carriage glides,almost friction free, over the base.
The rollers, alternately crisscrossed witheach other, move between a set of 4, partially flat, parallel, smooth rods on eachside of the base. The rollers share a largercontact surface with the rods as comparedto the point contact of steel balls. Thisbearing design allows crossed roller slidesto carry larger loads and absorb greaterload impacts than equivalent size ballslides.
Crossed roller slides are not as naturally self-cleaning in operation as ball slides. Inoperating environments, with little or noprotection against dust and when heavyloads are not a consideration, consider Del-Tron® ball slides.
Wide SelectionDel-Tron offers over 47 models of crossedroller slides. Load capacities range from 14 kg to 354 kg, with travel from 13mm to300mm. Installation into your system issimple. Counterbored holes in the basepermit quick attachment to your assembly.Components attach to the carriage in theexisting threaded mounting holes.
Crossed Roller Slides
17
SERIES
CARRIAGE4 HOLES (I)
BASE HOLE d
BASE HOLE D1
BASE HOLE h
COUNTER BORESCREW SIZE
RDA
M2THREAD
2.2
4.0
2.2
M2
RMA
M4THREAD
3.5
6.1
3.4
M3
REA
M3THREAD
3.5
6.1
3.4
M3
RNA
M4THREAD
4.6
8.1
4.4
M4
RSA1
M4THREAD
4.6
8.1
4.4
M4
RSA2
M4THREAD
4.6
8.1
4.4
M4
RSA3
M5THREAD
5.8
10
5.3
M5
Crossed RollerSlide Assemblies
RDA-1
RDA-2
RDA-3
RDA-4
RDA-5
RDA-6
REA-1
REA-2
REA-3
REA-4
REA-5
REA-6
RMA-1
RMA-2
RMA-2.5
RMA-3
RMA-4
13
25
50
75
100
127
13
25
50
75
100
127
13
25
38
50
75
14
25
30
32
36
41
22
35
42
44
47
49
32
35
35
38
41
11
17
26
34
37
45
14
28
40
51
62
74
37
51
57
65
79
27.0
52.0
78.0
103.0
129.0
154.0
27.0
52.0
78.0
103.0
129.0
154.0
40.0
65.0
78.0
90.0
116.0
8.0
8.0
8.0
8.0
8.0
8.0
10.4
10.4
10.4
10.4
10.4
10.4
12.7
12.7
12.7
12.7
12.7
14.2
14.2
14.2
14.2
14.2
14.2
19.0
19.0
19.0
19.0
19.0
19.0
25.4
25.4
25.4
25.4
25.4
15.0
41.0
66.0
92.0
117.0
143.0
15.0
41.0
66.0
92.0
117.0
142.0
32.0
57.0
65.0
82.0
108.0
6.0
6.0
6.0
6.0
6.0
6.0
9.0
9.0
9.0
9.0
9.0
9.0
10.0
10.0
10.0
10.0
10.0
4.7
4.7
4.7
4.7
4.7
4.7
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.4
6.4
6.4
6.4
6.4
6.4
9.5
9.5
9.5
9.5
9.5
9.5
12.7
12.7
12.7
12.7
12.7
19.0
35.0
60.0
86.0
89.0
114.0
19.0
35.0
60.0
86.0
89.0
114.0
32.0
57.0
65.0
82.0
108.0
MODEL TRAVEL*
LOADCAPACITY
(kg)WEIGHT
(g)LENGTH
AHEIGHT
BWIDTH
C
CARRIAGEHOLE
SPACINGD E
HEIGHTF
WIDTHG
HOLESPACING
H
BASE DIMENSIONS* Minimum Centered Around Mean Position
LOAD RATINGS AND LIFEESTIMATESCrossed roller slide rated loadcapacities may be a mass load on ahorizontal slide, or a force load normalto the mounting surface in any position.The rated load must be centered anddistributed over the slide, and the basemust be supported on a flat mountingsurface. Avoid concentrated ordistributed bending forces.
At rated load capacity and moderatespeeds, expected life is 25 millioncm of travel. The expected life at one
BD1
C
E
G
I
Fh
d
A
D
H
B
half the rated load is 250 million cm.
LUBRICATIONThe crossed roller slides are lightly lubricated during assembly.Additional lubrication is required forspeeds above 30,000 mm/min. and isadvisable at lower speeds where highloads are applied in continuous dutyapplications.
MOUNTINGMount the crossed roller slides on flatsurfaces to provide full support to thebase.
Dimensions in mm
moment load ratings + load / life formulas. pg.92
18
SPECIFICATIONS:
Straight line accuracy
Positional repeatability
Coefficient of friction
Construction
Finish
.003mm/25mm of travel
.003mm
.003 typical
Aluminum carriage and base, hardened steel rods androllers, stainless steel endcaps.
Black anodize
RNA-1
RNA-2
RNA-3
RNA-4
RNA-6
RNA-8
RNA-10
RSA1-1
RSA1-2
RSA1-3
RSA1-3.5
RSA1-4
RSA1-6
RSA1-8
RSA2-1
RSA2-1.5
RSA2-2
RSA2-3
RSA2-4
RSA2-6
RSA2-8
RSA3-1
RSA3-1.5
RSA3-2
RSA3-3
RSA3-4
RSA3-5
RSA3-6
RSA3-9
RSA3-12
19
38
50
75
100
150
200
25
50
75
89
100
150
200
25
38
50
75
100
150
200
25
38
50
75
100
127
150
228
304
50
60
100
120
129
135
145
59
79
79
95
139
163
187
59
68
79
79
139
170
204
102
119
158
198
198
215
317
336
354
40
68
88
150
173
204
232
85
128
176
196
238
266
332
116
173
187
232
343
454
561
292
292
454
635
816
936
1089
1366
1729
40.0
65.0
90.0
116.0
152.0
203.0
254.0
51.0
76.0
102.0
127.0
152.0
203.0
254.0
51.0
70.0
83.0
102.0
152.0
203.0
254.0
67.0
67.0
102.0
127.0
152.0
203.0
229.0
305.0
381.0
13.4
13.4
13.4
13.4
13.4
13.4
13.4
15.8
15.8
15.8
15.8
15.8
15.8
15.8
19.0
19.0
19.0
19.0
19.0
19.0
19.0
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
26.9
26.9
26.9
26.9
26.9
26.9
26.9
38.0
38.0
38.0
38.0
38.0
38.0
38.0
44.0
44.0
44.0
44.0
44.0
44.0
44.0
66.6
66.6
66.6
66.6
66.6
66.6
66.6
66.6
66.6
32.0
57.0
82.0
102.0
140.0
190.0
240.0
35.0
60.0
85.0
111.0
136.0
186.0
238.0
35.0
55.0
65.0
85.0
140.0
190.0
240.0
54.0
42.0
75.0
100.0
125.0
175.0
**75.0
**75.0
**75.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
7.9
7.9
7.9
7.9
7.9
7.9
7.9
8.6
8.6
8.6
8.6
8.6
8.6
8.6
10.2
10.2
10.2
10.2
10.2
10.2
10.2
15.9
15.9
15.9
15.9
15.9
15.9
15.9
15.9
15.9
12.7
12.7
12.7
12.7
12.7
12.7
12.7
19.0
19.0
19.0
19.0
19.0
19.0
19.0
22.2
22.2
22.2
22.2
22.2
22.2
22.2
38.1
38.1
38.1
38.1
38.1
38.1
38.1
38.1
38.1
28.0
54.0
79.0
82.0
102.0
127.0
178.0
37.0
60.0
85.0
85.0
100.0
127.0
178.0
38.0
55.0
65.0
85.0
100.0
127.0
178.0
54.0
42.0
75.0
100.0
125.0
187.0
178.0
254.0
330.0
MODEL TRAVEL*
LOADCAPACITY
(kg)WEIGHT
(g)LENGTH
AHEIGHT
BWIDTH
C
CARRIAGEHOLE
SPACINGD E
HEIGHTF
WIDTHG
HOLESPACING
H
BASE DIMENSIONS* Minimum Centered Around Mean Position
MODELRSA3-6RSA3-9RSA3-12
# OF HOLES** 6** 8** 10
Dimensions in mm
moment load ratings + load / life formulas. pg.92
19
1. Corrosion resistant hardened stainless steel internal components.
2. Up to 127mm wide cross section.
3. Interchangeable with other manufacturer’s products.
4. Low friction straight line design.
5. Adjustable preload.
6. Straight line design with 0.001mmrepeatability
Precision Series(Ball or Crossed Roller Slides)
Del-Tron® Precision Series Ball and Roller Slidesoffer the designer an aluminum base and carriagewith hardened stainless components for superiorcorrosion resistance and less chance of particulatecontamination. Available in standard low profilemounting, the designer can choose a style ofbearing and type of rolling element specifically tomeet the needs of the most particular applications.
Preload can be adjusted to change the friction andaxial play characteristics therefore customizing theslide to its intended use. A new 127mm wide crosssection allows the movement of bulky deviceswithout the necessity of constructing tables withmore than one unit.
6 Reasons to chooseDel-Tron®
Precision Series(Ball or Crossed Roller Slides)
Precision Series
20
Precision SeriesBall Slides
Model Travel* Weight(g)
Load Capacity(kg)
255075
25385075
100
255075
100125150
75125175
5.49.110
9.115202528
162942556370
426477
65.090.4115.8
50.869.982.6101.6127.0
66.5101.6127.0152.4203.2228.6
127.0177.8228.6
A
---
-----
-----
75
5075
100
D2
12.7
19.1
25.4
25.4
B
25.4
44.5
66.5
127.0
C
5783
108
35546585
115
5475
100125175150
100150200
D
3.5
4.6
5.8
7.1
d
6.1
8.1
10
11
D1
10
20
35
100
E
6.4
10.2
15.5
15.5
F
5783
108
38546585
115
5475
100125187178
100150200
H
3.4
4.4
5.3
6.2
h
*Minimum Centered Around Mean Position
M4
M4
M5
M6
I
5779102
113154186227286
2954535676807941021
102114741928
10.2
22.1
38.1
98.3
G
MA-2SSMA-3SSMA-4SS
SA2-1SSSA2-1.5SSSA2-2SSSA2-3SSSA2-4SS
SA3-1SSSA3-2SSSA3-3SSSA3-4SSSA3-5SSSA3-6SS
SA5-3SSSA5-5SSSA5-7SS
A
B
D1
C
E
G
I
Fh
d
A
D
H
D2
1
Straight Line Accuracy.003mm/25mm of travel.
Repeatability0.001mm
Coefficient of Friction0.002
SPECIFICATIONS:
ConstructionAluminum carriage and base.Hardened stainless steel balls,shafts, pre-load gibs.Interchangeable with other manufacturers. Economical BallSlide design.
Dimensions in mm
moment load ratings + load / life formulas. pg.92
21
Precision SeriesCrossed Roller Slides
Model Travel* Weight(g)
Load Capacity(kg)
255075
100
255075
100125
75125175
36545964
95109154173186
100109118
50.882.6
101.6127.0
66.5101.6127.0152.4203.2
127.0177.8228.6
A
----
-----
5075
100
D2
19.0
25.4
25.4
B
44.5
67
127
C
356585
115
5475
100125175
100150200
D
4.6
5.8
7.1
d
8.1
10
11
D1
20
35
100
E
10.2
15.5
15.5
F
386585
115
5475
100125187
100150200
H
4.6
5.3
6.2
h
*Minimum Centered Around Mean Position
M4
M5
M6
I
127209254286
299454567680907
102114741928
22.1
38.1
98.3
G
RSA2-1SSRSA2-2SSRSA2-3SSRSA2-4SS
RSA3-1SSRSA3-2SSRSA3-3SSRSA3-4SSRSA3-5SS
RSA5-3SSRSA5-5SSRSA5-7SS
A
D1
Fh
d
A
D
H
B
C
E
G
ID2
1
Straight Line Accuracy0.003mm/25mm of travel.
Repeatability0.001mm
Coefficient of Friction0.002.
SPECIFICATIONS:
ConstructionAluminum carriage and base.Hardened stainless steel rollers,shafts, pre-load gibs.Interchangeable with othermanufacturers. Load capacitiesup to 186 kg. Crossed Rollerdesign offers self-aligning waysand greater load capacity.
Dimensions in mm
moment load ratings + load / life formulas. pg.92
22
1. Stable flanged base style available
2. Superior accuracy and repeatability.
3. Precision ground carriage and base.
4. Corrosion resistant hardened stainlesssteel internal components.
5. Bigger cross sections and lengths forheavy loads and large moving parts.
6. Smooth low friction motion.
High Precision Series(Ball or Crossed RollerSlides)
Del-Tron® High Precision Series Ball andCrossed Roller Slides offer the designer highlyaccurate travel characteristics. .001mm/25mm oftravel with superior repeatability of 0.0005mm.The base and carriage inner surfaces are groundto submicron tolerances while the mountingsurfaces are flat to within .003mm/25mm.
The standard low profile style incorporates abase which is surrounded by the carriage leaving little surface to attract and hold contaminants. A flanged base style is offered toallow robust mounting at 4 points to assure stability in high impact or rough duty environments.
These slides utilize Del-Tron’s straight linedesign which allows lower friction characteristicsalong with the option to manipulate the preloadto adjust to the needs of the application.
New larger widths and lengths up to 146mmwide and 381mm long increase the versatility ofthis design.
6 Reasons to chooseDel-Tron®
High Precision Series(Ball or CrossedRoller Slides)
High Precision Series
23
High Precision SeriesBall Slides(Low Profile)
Straight Line Accuracy.001mm/25mm of travel.
Repeatability0.0005mm
Coefficient of Friction0.002
HPMA-1HPMA-2HPMA-2.5HPMA-3
HPSA2-1HPSA2-1.5HPSA2-2HPSA2-3
HPSA3-1HPSA3-2HPSA3-3HPSA3-4HPSA3-5
HPSA4-2HPSA4-3HPSA4-5HPSA4-6.5HPSA4-9
HPSA5-5HPSA5-7HPSA5-10
Model Travel* Weight (g)
Load Capacity(kg)
13253850
25385075
255075
100125
5075
125165225
125175250
3.66.81114
11141923
3338466066
5964737991
6882
102
27507391
127172209254
299454567680907
9071306181423273175
453665868233
25.444.563.582.6
50.869.982.6
101.6
66.5101.6127.0152.4203.2
101.6146.1203.2260.4355.6
209.6304.8381.0
A
31.850.869.988.8
57.276.288.9
108.0
66.5111.0136.4161.8212.6
114.3158.8215.9273.1368.3
222.3317.5393.7
A1
12.7
19.0
25.4
34.9
50.8
B
25.4
44.5
66.5
88.9
146.1
C
15355470
35546585
5475
100125178
5095
150210305
150250330
D
3.5
4.6
5.8
5.8
7.1
d
6.1
8.1
10
10
11
D1
CL
20
35
50
100
E
6.1
10.2
15.7
15.7
24.9
F
10.2
22.1
38.1
50.3
94.0
G
20405775
40577090
5485
110135190
65110175225320
175275350
H
3.4
4.6
5.3
5.3
6.2
h
*Minimum Centered Around Mean Position
M3
M4
M5
M5
M6
I
SPECIFICATIONS:
ConstructionAluminum carriage and base.Hardened stainless steel balls,shafts, pre-load gibs.Interchangeable with other manufacturers. Carriage andbase ground to optical flatness.Bearing way surfaces held tosubmicron tolerances. Carriage surface flat to.003mm/25mm. Ball Slide designoffers low rolling resistance andeconomical price.
Dimensions in mm
moment load ratings + load / life formulas. pg.93
24
High Precision SeriesBall Slides(Flange Base)
Model Travel* Weight (g)
Load Capacity(kg)
13253850
25385075
255075
100125
5075
125165225
125175250
3.66.81114
11141923
3338466066
5964737991
6882
102
366491
118
172236277340
413635794953
1270
11341628226829083969
544378939870
25.444.563.582.6
50.869.982.6
101.6
66.5101.6127.0152.4203.2
101.6146.1203.2260.4355.6
207.6304.8381.0
A
31.850.869.988.9
57.276.288.9
108.0
66.5111.0136.4161.8212.6
114.3158.8215.9273.1368.3
222.3317.5393.7
A1
19.1
26.2
34.9
44.5
60.3
B
25.4
44.5
66.5
88.9
146.1
C
15355470
35546585
5475
100125178
5095
150210305
150250330
D
3.5
4.6
5.8
5.8
7.1
d
6.1
8.1
10
10
11
D1
CL
20
35
50
100
E
12.7
17.3
25.4
25.0
34.3
F
19
33
52
70
127
H1
20405775
40577090
5485
110135190
65110175225320
175275350
H
3.4
4.6
5.3
5.3
6.2
h
*Minimum Centered Around Mean Position
HPMA-1FBHPMA-2FBHPMA-2.5FBHPMA-3FB
HPSA2-1FBHPSA2-1.5FBHPSA2-2FBHPSA2-3FB
HPSA3-1FBHPSA3-2FBHPSA3-3FBHPSA3-4FBHPSA3-5FB
HPSA4-2FBHPSA4-3FBHPSA4-5FBHPSA4-6.5FBHPSA4-9FB
HPSA5-5FBHPSA5-7FBHPSA5-10FB
M3
M4
M5
M5
M6
I
6.4
7.1
9.4
9.4
9.4
K
Straight Line Accuracy.001mm/25mm of travel.
Repeatability0.0005mm
Coefficient of Friction0.002
ConstructionAluminum carriage and base.Hardened stainless steel balls,shafts, pre-load gibs.Interchangeable with other manufacturers. Carriage andbase ground to optical flatness.Bearing way surfaces held tosubmicron tolerances. Carriagesurface flat to .003mm/25mm.Flange Base design allows easeof mounting and stability.
SPECIFICATIONS:
Dimensions in mm
moment load ratings + load / life formulas. pg.93
25
High Precision SeriesCrossed Roller Slides(Low Profile)
Model Travel* Weight (g)
Load Capacity(kg)
25385075
255075
100125
5075
125165225
125175250
41685964
100114159177191
118127145159182
136163204
50.869.982.6
101.6
66.5101.6127.0152.4203.2
101.6146.1203.2260.4355.6
209.6304.8381.0
A
57.276.288.9
108.0
66.5111.0136.4161.8212.6
114.3158.8215.9273.1368.3
222.3317.5393.7
A1
19.1
25.4
34.9
50.8
B
44.5
66.5
88.9
146.1
C
35546585
5475
100125178
5095
150210305
150250330
D
4.6
5.8
5.8
7.1
d
8.1
10
10
11
D1
20
35
50
100
E
10.2
15.7
15.7
24.9
F
40577090
5485
110135190
65110175225320
175275350
H
4.6
5.3
5.3
6.2
h
*Minimum Centered Around Mean Position
M4
M5
M5
M6
I
HPRSA2-1HPRSA2-1.5HPRSA2-2HPRSA2-3
HPRSA3-1HPRSA3-2HPRSA3-3HPRSA3-4HPRSA3-5
HPRSA4-2HPRSA4-3HPRSA4-5HPRSA4-6.5HPRSA4-9
HPRSA5-5HPRSA5-7HPRSA5-10
127172209254
299454567680907
9071306181423273175
453665868232
22.1
38.1
50.3
94.0
G
A
B
D1
C
E
G
I
Fh
d
A
D
H
1
Straight Line Accuracy.001mm/25mm of travel.
Repeatability0.0005mm
Coefficient of Friction0.002
SPECIFICATIONS:
ConstructionAluminum carriage and base.Hardened stainless steel rollers,shafts, pre-load gibs.Interchangeable with other manufacturers. Carriage andbase ground to optical flatness.Bearing way surfaces held tosubmicron tolerances. Carriagesurface flat to .003mm/25mm.Crossed Roller design greatlyincreases load capacity andoverhung load capability.
Dimensions in mm
moment load ratings + load / life formulas. pg.93
26
High Precision SeriesCrossed Roller Slides(Flange Base)
Model Travel* Weight (g)
Load Capacity(kg)
25385075
255075
100125
5075
125165225
125175250
41525964
100114159177191
118127145159182
136163204
50.869.982.6
101.6
66.9101.6127.0152.4203.2
101.6146.1203.2260.4355.6
209.6304.8381.0
A
57.276.288.9
108.0
66.5111.0136.4161.8212.6
114.3158.8215.9273.1368.3
222.3317.5393.7
A1
26.2
34.9
44.5
60.3
B
44.5
66.5
88.9
146.1
C
35546585
5475
100125178
5095
150210305
150250330
D
4.6
5.8
5.8
7.1
d
8.1
10
10
11
D1
20
35
50
100
E
17.3
25.4
25.0
34.3
F
40577090
5485
110135190
65110175225320
175275350
H
4.6
5.3
5.3
6.2
h
*Minimum Centered Around Mean Position
M4
M5
M5
M6
I
172236277340
413635794953
1270
11341628226829083969
544378939870
7.1
9.4
9.4
9.4
K
HPRSA2-1FBHPRSA2-1.5FBHPRSA2-2FBHPRSA2-3FB
HPRSA3-1FBHPRSA3-2FBHPRSA3-3FBHPRSA3-4FBHPRSA3-5FB
HPRSA4-2FBHPRSA4-3FBHPRSA4-5FBHPRSA4-6.5FBHPRSA4-9FB
HPRSA5-5FBHPRSA5-7FBHPRSA5-10FB
33
52
70
127
H1
A
B
D1
C
E I
Fh
d
A
D
H
H
K
1
1
Straight Line Accuracy.001mm/25mm of travel.
Repeatability0.0005mm
Coefficient of Friction0.002
SPECIFICATIONS:
ConstructionAluminum carriage and base.Hardened stainless steel rollers,shafts, pre-load gibs.Interchangeable with other manufacturers. Carriage andbase ground to optical flatness.Bearing way surfaces held tosubmicron tolerances. Carriagesurface flat to .003mm/25mm.Flange Base with crossed rollerdesign offers the ultimate inaccuracy, capacity and stability.
Dimensions in mm
moment load ratings + load / life formulas. pg.93
27
Del-Tron® MiniPosi-Drive™Stages
Compact Posi-Drive™ series LSA1 and LRSA1stages have a height of only 32mm and awidth of only 35mm. These stages provide the same outstanding .003mmstraight line accuracy per 25mm of travel and.003mm repeatability as the larger LSA3 seriesPosi-Drive™ line. The new smaller stages alsooffer a compact, flexible configuration and areadaptable to standard Nema configurations.
The LSA1 Posi-Drive™ stages offer a .168”diameter .5mm lead screw, an anti-backlashnut and a flexible zero backlash coupling thataccepts a Nema 14 motor. They provide aload-carrying capacity of up to 18.1 kg. Thestages are available in travel lengths rangingfrom 25mm to 100mm. Del-Tron also providesspecial configurations, motor mounts, handcrank actuation and a variety of leads andpitches.
The new positioners are available with eitherlinear ball or crossed roller slides and can beconfigured for one, two, or three-axis positioning. In the ball slide version, precisionsteel balls roll in the raceway grooves withcontact at four points, enabling load andmoment to be carried on all directions.Rolling resistance is extremely low, ensuringsmooth and stable operation. Crossed rollerslides physically resemble ball slides exceptfor the bearing design. The rollers share alarger contact surface with the rods as compared to the point contact of steel balls.This bearing design allows crossed rollerslides to carry larger loads and absorbgreater load impacts than equivalent size ballslides.
6 Reasons to chooseDel-Tron® MiniPosi-Drive™ Stages
(LSA1, LRSA1 Series)
Mini Posi-Drive™ Stages
1. Positive lead screw drive.
2. Zero backlash.
3. Friction-free linear ball or roller slides.
4. Accurate, repeatable linear travel.
5. Compact adaptable configuration.
6. Adaptable to standard NemaConfigurations.
28
Specifications
Drive: .168” diameter .5mm lead screw with anti-backlash nut.
Coupling: Flexible zero backlash coupling.
Motor Mount: Accepts Nema 14 motor
Travel: 25mm - 100mm
Anti-Friction Slide: Linear ball or crossed roller slide.
Load Capacity: Up to 18.1 kg
Configuration: 1, 2 or 3 axis.
Accuracy: Straight line, up to .003mm/25mm oftravel.
Repeatability: .003mm
Also available are special configurations, motor mounts, handcrank actuation, and a variety of leads and pitches.
Motor/controller available.
Del-Tron® MiniPosi-Drive™Stages
L
Lead screw actuator
SA1
SA1 = Ball slide type
RSA1 = Crossed roller slide type
Travel in mm
25
50
75
100
Lead screw diameter
4.3mm
005=.5mm
25 C 005
Part number for Mini Posi-Drive™Stage
X single
XY double
XYZ triple
xxx
Nomenclature
Configuration
E=end of travel
H=homeposition switch
EH=combined
Type of sensor
PNP
NPN
E PNP
Length of cable
1=1 meter
3=3 meter
1
29
LRSA1-25-C005LRSA1-50-C005LRSA1-75-C005LRSA1-100-C005
255075
100
356085
135
376085
100
Roller Slide Mini Posi-Drive™ Travel* HD
6.89.1
13.618.1
LoadCapacity
kg
LSA1-25-C005LSA1-50-C005LSA1-75-C005LSA1-100-C005
255075
100
50.876.2
101.6152.4
356085
135
376085
100
Ball SlideMini Posi-Drive™ Travel* HDB
52.652.652.658.9
C
103.4128.8154.2211.3
A
50.876.2
101.6152.4
B
52.652.652.658.9
C
103.4128.8154.2211.3
A
3.64.56.89.1
LoadCapacity
kg
Dimensions in mm
Dimensions in mm
.310
.8101.3102.310
1.190.690.990.990
SL
.310
.8101.3102.310
1.190.690.990.990
SL
moment load ratings + load / life formulas. pg.93
moment load ratings + load / life formulas. pg.93
30
Mini Posi-Drive™™ Series LSA1, LRSA1Designed for NEMA 14 motor frame, other motor adaptors available. Supplied with coupling for 5mm motor shaft.Couplings with inch and metric bore available. Standard travels of 25mm, 50mm, 75mm and 100mm
31.0
6.35
38.1
318
69.9
6.35
318
31.8
35.05
73.1
Z AXIS BRACKET
25.0
15.0
31
LIMIT AND POSITION SWITCHESEOT (End Of Travel) and HPS (Home Position Switches)Del-Tron Precision offers the addition of EOT and HPS to all 3 sizes of the Posi-Drive series. The EOT kitand the HPS kit could be used together or independently. The stand alone kits can be added to any of the3 sizes of the Posi-Drive series. The EOT kit comes with 2 switches mounted to the base at each end.There are 2 flags that are mounted to the carriage. These flags are adjustable for either the full range oftravel or for limited amount of travel if the application requires such. The Home Position Switch kit comeswith 1 switch mounted to the base in the center. There is an adjustable flag mounted to the carriage. Theadjustable flag will allow the Home Position to be set anywhere along the entire range of travel.The EOT and HPS are easily mounted to brackets, which are then attached to the base. The flags areeasily assembled to a bracket that is then attached to the carriage. The base and carriage have thethreaded mounting holes available for easy assembly of the brackets. The switches are photoelectricsensors that operate on a supply voltage of 5 to 24 VDC. The repeatability is .0002" and the response timeis 100μseconds. The sensors are available in both NPN and PNP outputs. The sensors are equipped witha quick fitting Hook-Up Connector with cable lengths in 1m or 3m.Part Numbering System for EOT and HPS
E-PNP-1X-XXX-X
X-Configuration- E=EOT, H=HPS, EH=CombinedXXX=Type of Sensor, PNP or NPNX=Length of Cable, 1=1meter, 3= 3 meter
Part Number and Price ListE-PNP-1 $119E-NPN-1 $119H-PNP-1 $59H-NPN-1 $59EH-PNP-1 $179EH-NPN-1 $179
Prices are the same for the 3 meterlength cable and connector.
LSA1 and LRSA1 SERIES
TRAVEL B J
25 50.8 38.150 76.2 63.575 101.6 88.9110 152.4 139.7
7.62
35.33
21.84 4.6
15.27 15.24
21.49 21.49
Lead: .5mm
Maximum RecommendedRevolutions Per Second
20 RPS
32
Del-Tron® MiniPosi-Drive™Stages
Compact Posi-Drive™ series LSA2 and LRSA2stages have a height of only 41.9mm and awidth of only 44.4mm. These stages providethe same outstanding .003mm straight lineaccuracy per 25mm of travel and .003mmrepeatability as the larger LSA3 series Posi-Drive™ line. The new smaller stages alsooffer a compact, flexible configuration and areadaptable to standard Nema configurations.
The LSA2 Posi-Drive™ stages offer a .250”diameter 2mm lead screw, an anti-backlashnut and a flexible zero backlash coupling thataccepts a Nema 17 motor. They provide aload-carrying capacity of up to 27.2 kg. Thestages are available in travel lengths rangingfrom 25mm - 100mm. Del-Tron also providesspecial configurations, motor mounts, handcrank actuation and a variety of leads andpitches.
The new positioners are available with eitherlinear ball or crossed roller slides and can beconfigured for one, two, or three-axis positioning. In the ball slide version, precisionsteel balls roll in the raceway grooves withcontact at four points, enabling load andmoment to be carried on all directions.Rolling resistance is extremely low, ensuringsmooth and stable operation. Crossed rollerslides physically resemble ball slides exceptfor the bearing design. The rollers share alarger contact surface with the rods as compared to the point contact of steel balls.This bearing design allows crossed rollerslides to carry larger loads and absorbgreater load impacts than equivalent size ballslides.
6 Reasons to chooseDel-Tron® Mini Posi-Drive™ Stages(LSA2, LRSA2 Series)
Mini Posi-Drive™ Stages
1. Positive lead screw drive.
2. Zero backlash.
3. Friction-free linear ball or roller slides.
4. Accurate, repeatable linear travel.
5. Compact adaptable configuration.
6. Adaptable to standard NemaConfigurations.
33
Specifications
Drive: .250” diameter 2mm lead screw withanti-backlash nut.
Coupling: Flexible zero backlash coupling.
Motor Mount: Accepts Nema 17 motor
Travel: 25 - 100mm
Anti-Friction Slide: Linear ball or crossed roller slide.
Load Capacity: Up to 27.2 kg
Configuration: 1, 2 or 3 axis.
Accuracy: Straight line, up to .003mm/25mm of travel.
Repeatability: .003mm
Also available are special configurations, motor mounts, handcrank actuation, and a variety of leads and pitches.
Motor/controller available.
Del-Tron® MiniPosi-Drive™Stages
L
Lead screw actuator
SA2
SA2 = Ball slide type
RSA2 = Crossed roller slide type
Travel in mm
25
38
50
75
100
Lead screw diameter
6.3mm
01=1mm
02=2mm Standard01.5=1.5mm
03=3mm
25 A 02
Part number for Mini Posi-Drive™Stage
X single
XY double
XYZ triple
xxx
Nomenclature
Configuration
E=end of travel
H=homeposition switch
EH=combined
Type of sensor
PNP
NPN
E PNP
Length of cable
1=1 meter
3=3 meter
1
34
LRSA2-25-A02LRSA2-38-A02LRSA2-50-A02LRSA2-75-A02LRSA2-100-A02
25385075
100
124.0143.0155.7174.8219.2
57.276.288.9
108.0152.4
35556585
140
38556585
100
Roller Slide Mini Posi-Drive Travel A HDB
9.114182327
LoadCapacity
kg
LSA2-25-A02LSA2-38-A02LSA2-50-A02LSA2-75-A02LSA2-100-A02
25385075
100
124.0143.0155.7174.8219.2
57.276.288.9
108.0152.4
35556585
140
38556585
100
Ball SlideMini Posi-Drive Travel A HDB
4.56.89.11114
LoadCapacity
kg
Dimensions in mm
Dimensions in mm
.250
.625
.8751.2502.125
1.6501.2751.025.650
1.775
SL
.250
.625
.8751.2502.125
1.6501.2751.025.650
1.775
SL
moment load ratings + load / life formulas. pg.93
moment load ratings + load / life formulas. pg.93
35
Mini Posi-Drive Series LSA2, LRSA2Designed for NEMA 17 motor frame, other motor adaptors available. Supplied with coupling for 5mm motor shaft.Couplings with inch and metric bore available. Uses a leadscrew with anti-backlash nut. Standard lead is 2mm. Leadsavailable at no additional cost 1mm,1.5mm, 2mm, 3mm and 4mm. Standard travels of 25, 38, 50, 75, and 100mm
44.45
41.9
6.341.9
41.9
66.8
6.341.9
90.1
66.80
41.91
44.45
66.80
36
LIMIT AND POSITION SWITCHESEOT (End Of Travel) and HPS (Home Position Switches)Del-Tron Precision offers the addition of EOT and HPS to all 3 sizes of the Posi-Drive series. The EOT kitand the HPS kit could be used together or independently. The stand alone kits can be added to any of the3 sizes of the Posi-Drive series. The EOT kit comes with 2 switches mounted to the base at each end.There are 2 flags that are mounted to the carriage. These flags are adjustable for either the full range oftravel or for limited amount of travel if the application requires such. The Home Position Switch kit comeswith 1 switch mounted to the base in the center. There is an adjustable flag mounted to the carriage. Theadjustable flag will allow the Home Position to be set anywhere along the entire range of travel.The EOT and HPS are easily mounted to brackets, which are then attached to the base. The flags areeasily assembled to a bracket that is then attached to the carriage. The base and carriage have thethreaded mounting holes available for easy assembly of the brackets. The switches are photoelectricsensors that operate on a supply voltage of 5 to 24 VDC. The repeatability is .005mm and the responsetime is 100μseconds. The sensors are available in both NPN and PNP outputs. The sensors are equippedwith a quick fitting Hook-Up Connector with cable lengths in 1m or 3m.Part Numbering System for EOT and HPS
E-PNP-1X-XXX-X
X-Configuration- E=EOT, H=HPS, EH=CombinedXXX=Type of Sensor, PNP or NPNX=Length of Cable, 1=1meter, 3= 3 meter
Part Number and Price ListE-PNP-1 $119E-NPN-1 $119H-PNP-1 $59H-NPN-1 $59EH-PNP-1 $179EH-NPN-1 $179
Prices are the same for the 3 meterlength cable and connector.
LSA2 and LRSA2 SERIES
TRAVEL B T
25 57.15 41.2738 76.20 60.3250 88.90 73.0275 107.95 92.07100 152.40 136.52
T
21.84
13.97
37.0
.7821.48 21.4815.24 15.24
Lead: .2mm
Maximum RecommendedRevolutions Per Second
20 RPS
37
Del-Tron®
Posi-Drive™Stages
Compact, economical Posi-Drive™ stagesfrom Del-Tron take the work out ofdesigning motion control systems. Ourstages require no alignment ofcomponents, install with only fourstandard fasteners, are fitted with anti-backlash lead screws, multi-beamcouplings with high speed misalignmentcapability and standard NEMA motormounts.
Available in one, two or three axis configurations with either ball or crossedroller slides, these stages travel up to300mm. The crossed roller slide optionincreases load capacity up to 82 kg and2500 million mm of travel is possible at1/2 rated load. Motor/controller packagescan be provided.
6 Reasons to chooseDel-Tron® Posi-Drive™Stages
Posi-Drive™ Stages
1. Positive lead screw drive.
2. Zero backlash.
3. Friction-free linear ball or roller slides.
4. Accurate, repeatable linear travel.
5. Compact adaptable configuration.
6. Adaptable to standard Nema Configurations.
38
Specifications
Drive: 10mm diameter 2mm lead screw with anti-backlash nut.
Leads Available: 3mm and 20mm
Coupling: Flexible zero backlash coupling.
Motor Mount: Accepts Nema 23 motor
Travel: 25 - 300mm
Anti-Friction Slide: Linear ball or crossed roller slide.
Load Capacity: Up to 82 kg
Configuration: 1, 2 or 3 axis.
Accuracy: Straight line, up to .003mm/25mmof travel.
Repeatability: .003mm
Also available are special configurations, motor mounts,hand crank actuation, and a variety of leads and pitches.
Motor/controller available.
Del-Tron®
Posi-Drive™Stages
L
Lead screw actuator
SA3
SA3 = Ball slide type
RSA3 = Crossedroller slide type
Travelmm
Lead screwdiameter
10mm
Lead screw pitch
2mm=B02 Standard
3mm=B03
20mm=B20
25 B 02
Nomenclature
Part number for Posi-Drive™Stage
X single
XY double
XYZ triple
xxx
25
50
75100
150
200
250
300
Configuration
E=end of travel
H=homeposition switch
EH=combined
Type of sensor
PNP
NPN
E PNP
Length of cable
1=1 meter
3=3 meter
1
39
MODEL
LSA3-25-B02
LSA3-50-B02
LSA3-75-B02
LSA3-100-B02
LSA3-150-B02
LSA3-200-B02
LSA3-250-B02
LSA3-300-B02
LRSA3-25-B02
LRSA3-50-B02
LRSA3-75-B02
LRSA3-100-B02
LRSA3-150-B02
LRSA3-200-B02
LRSA3-250-B02
LRSA3-300-B02
A
143
168
194
219
321
397
473
549
143
168
194
219
321
397
473
549
B
76
102
127
152
229
279
330
381
76
102
127
152
229
279
330
381
B1
237
287
338
389
237
287
338
389
A1
329
405
482
558
329
405
482
558
D
55
75
100
125
55
75
100
125
P
10
12
14
14
10
12
14
14
E
67
67
67
67
92
118
143
168
67
67
67
67
92
118
143
168
F
10.5
13.5
13.5
13.5
39.5
27.0
15.0
40.5
10.5
13.5
13.5
13.5
39.5
27.0
15.0
40.5
G
13.0
26.0
38.5
51.0
89.5
114.5
140.0
165.5
13.0
26.0
38.5
51.0
89.5
114.5
140.0
165.5
H
60
60
60
60
100
150
200
250
60
60
60
60
100
150
200
250
H1
0
85
110
135
175
225
275
325
0
85
110
135
175
225
275
325
J
0
8.5
8.5
8.5
27.0
27.0
27.5
28.0
0
8.5
8.5
8.5
27.0
27.0
27.5
28.0
K
8.0
21.0
33.5
46.0
64.5
64.5
65.0
65.5
8.0
21.0
33.5
46.0
64.5
64.5
65.0
65.5
Posi-Drive™
L
5
17
30
43
81
106
132
157
5
17
30
43
81
106
132
157
M
0
0
0
0
10
10
10
10
0
0
0
0
10
10
10
10
N
95
95
95
95
104
104
104
104
95
95
95
95
104
104
104
104
R
8
8
8
19
44
70
95
121
8
8
8
19
44
70
95
121
S
52
40
27
14
-24
-49
-75
-100
52
40
27
14
-24
-49
-75
-100
MODEL
LSA3-25-B02
LSA3-50-B02
LSA3-75-B02
LSA3-100-B02
LSA3-150-B02
LSA3-200-B02
LSA3-250-B02
LSA3-300-B02
LRSA3-25-B02
LRSA3-50-B02
LRSA3-75-B02
LRSA3-100-B02
LRSA3-150-B02
LRSA3-200-B02
LRSA3-250-B02
LRSA3-300-B02
TRAVEL
mm
25
50
75
100
150
200
250
300
25
50
75
100
150
200
250
300
LOAD
CAPACITY
kg
14
16
18
20
25
27
34
41
27
32
36
41
50
54
68
82
Posi-Drive
Dimensions in mm
moment load ratings + load / life formulas. *Travel is 1/2 distance from center in either direction.
Designed for NEMA 23 motor frame. Supplied with coupling for 8mm motor shaft. Uses 10mm diameter lead-screw with anti-backlash nut. Standard lead is 2mm.Standard travels of 25-300mmOther motor adapters and coupling with inch and metric bore available as special order.Leads available in 3mm and 20mm
Lead: 2mm
Maximum RecommendedRevolutions Per Second
20 RPS
10 RPS
10 RPS
Lead: 3mm
Lead: 20mm
moment load ratings + load / life formulas. pg.93
40
B
57.15
A
E
R
L
44.45
44.45
M
S (+) Z Axis ExtendsBeyond X AxisS (-) Z Axis is Inside X Axis
Y Axis Adaptor Plate for6, 8, 10 & 12" of travel
LX Axis
Y Axis
Z Axis Bracket
Z Axis iscentered
over Y Axis
Motor Centerline of Z Axisis in Same Plane as Motor
Centerline of X Axis
BA
E
N
ABE
L
66.68
Y Axis
44.45
M
L 66.68
Y Axis Adaptor Plate for150, 200, 250 & 300mm of travel
X Axis
44.45
50.80DB
AE
FG
66.6860.33
31.75
M5 Thread8 Places
19.0544.45
50.8066.68
7.95HH1B
KJ C'Bore for M5
Socket Hd Cap Screw8 Places(25mm Travel, 4Places)
AB
76.20050.80
76.200G
M5 Thread"P" Places
57.15
66.68
4.78
57.15
25.58
6.83
66.68 Dia. B.C.M5 Thread
4 Places
6.35 Bore ofcoupling forNEMA 23 Motor
F
Carriage Dimensions for Posi-Driveswith 25 - 100mm of travel
Carriage Dimensions for Posi-Driveswith 150 - 300mm of travel
150, 200, 250 & 300mm of travel
50.0
50.0
8.34
35.0
66.68
60.066.68
28.58
41
LIMIT AND POSITION SWITCHESEOT (End Of Travel) and HPS (Home Position Switches)Del-Tron Precision offers the addition of EOT and HPS to all 3 sizes of the Posi-Drive series. The EOT kitand the HPS kit could be used together or independently. The stand alone kits can be added to any of the3 sizes of the Posi-Drive series. The EOT kit comes with 2 switches mounted to the base at each end.There are 2 flags that are mounted to the carriage. These flags are adjustable for either the full range oftravel or for limited amount of travel if the application requires such. The Home Position Switch kit comeswith 1 switch mounted to the base in the center. There is an adjustable flag mounted to the carriage. Theadjustable flag will allow the Home Position to be set anywhere along the entire range of travel.The EOT and HPS are easily mounted to brackets, which are then attached to the base. The flags areeasily assembled to a bracket that is then attached to the carriage. The base and carriage have thethreaded mounting holes available for easy assembly of the brackets. The switches are photoelectricsensors that operate on a supply voltage of 5 to 24 VDC. The repeatability is .005mm and the responsetime is 100μseconds. The sensors are available in both NPN and PNP outputs. The sensors are equippedwith a quick fitting Hook-Up Connector with cable lengths in 1m or 3m.Part Numbering System for EOT and HPS
E-PNP-1X-XXX-X
X-Configuration- E=EOT, H=HPS, EH=CombinedXXX=Type of Sensor, PNP or NPNX=Length of Cable, 1=1meter, 3= 3 meter
Part Number and Price ListE-PNP-1 $119E-NPN-1 $119H-PNP-1 $59H-NPN-1 $59EH-PNP-1 $179EH-NPN-1 $179
Prices are the same for the 3 meterlength cable and connector.
LSA3 and LRSA3 SERIES
TRAVEL B T
25 76.2 60.3350 101.6 85.7375 127.0 111.13100 152.4 136.53150 228.6 212.73200 279.4 263.53250 330.2 314.33300 381.0 365.13
42
Del-Tron®®
Air ActuatorsPneumatically actuated crossed rollerslide assemblies controlled by a pair ofAirpot™ actuators, provide extremely lowfriction and stiction characteristics. A lighttouch or physical obstruction will stop theunit’s movement to prevent damage todelicate and expensive equipment andparts. Low pressure operation is possible.The PNRE series requires less than 10psi to operate.
Each slide is comprised of an aluminumcarriage straddling an aluminum base.Using a bearing system containingcylindrical steel rollers, the carriageglides, almost friction-free, over the base.The rollers, alternately crisscrossed witheach other, move between a set of four,partially flat, parallel, smooth rods oneach side of the base. The Del-Tron
®
Straight Line Design™ makes possible thelow stiction and friction characteristicsDel-Trons are known for, unlikerecirculating designs in which the rollingelements must turn corners and oftenslide against each other as they travel.
Airpot™ Pneumatic Actuators are ultra lowfriction devices designed to provideprecise, repeatable motion at very high orlow speeds without seals or lubrication.They run clean and operate over a widetemperature range with no change inperformance. The basic constructionconsists of a graphitized carbon piston,precision ground to millionths of an inchTIR, inside an annealed, borosilicateglass cylinder with a precision firepolished bore.
6 Reasons to chooseDel-Tron®® Air Actuators
Friction Free Air Actuator
1. Low Pressure operation: <10 PSI
2. Low Friction: <1gm
3. Wide range variable speed: smooth, slow andhigh speed capabilities.
4. Precise, gentle handling of wafers, chips andsurface mount devices.
5. Ideal for fluid sample handling and adhesive deposition.
6. Del-TronCrossed Roller Slide, driven by 2 AirActuated Dashpots, provides a frictionlessinterface for up to 50mm travel in a compactpackage.
43
MODEL
PNRE-1M
PNRE-2M
PNRE-3M
A
80
120
200
L
70
110
190
TRAVEL*
12
25
50
B
54
54
78
C
41
41
66
Measurements in Millimeters
*Travel is 1/2 distance from center in either direction.Load Capacity kg.
2.3
2.3
2.3
44
6 Reasons to chooseDel-Tron® Ball SlidePositioning Stages
Del-Tron®
Ball Slide Positioning Stages
Del-Tron® offers over 60 models ofpositioning slides.Used for gaging and positioning light andmedium loads, applications include measuringinstruments and optical assemblies. Del-Tron®
positioners, built with the same rigorous manufacturing demands as our ball slide assemblies, offer the benefits of qualityconstruction.
Spring loaded micrometer drives allow preciserepeatable adjustments with low friction andzero backlash. (Micrometers available in inch ormetric units.) Slides provide accuracy to.013mm/25mm of travel and repeatability of.003mm. Over 60 models support loadcapacities to 27.2 kg. Our full line includes thesubminiature series with the smallestcommercially available positioner, the standardseries, ideal for most gaging and positioningapplications, and our heavy duty seriesproviding high load capacities with the samehigh accuracy and repeatability.
Positioning slides can be stacked for multi-axisapplications. Standard stacked units are available in XY and XYZ configurations.Preloaded positioning slides, fully assembled,arrive ready for your use.
Positioners are available in black anodized finishor other finishes on request.
1. Versatile- Smooth, accurate travel forintermittent motion applications.
2. Positive Locking- Side mounted lockfeature prevents movement of carriage.
3. Accurate Measurements- Carriagesare spring loaded against micrometer heads with 0.01mm graduations.
4. Adaptable- One, two or three axismodels can be used in any orientation.
5. Easy To Use- Standard counterboredholes in base and threaded holesin carriage.
6. Wide Selection- Subminiature and low profile models.
Ball Slide Positioning Stages(Micrometer Driven)
45
• Posi-Lock™ feature consists of steel shim and extended micrometer bracket secured by a screwmounted to the side of the stage carriage. This allows the user to positively lock the position of thecarriage during use. Posi-Lock™ is standard on the model 99MM and optional on all others.
• Locking micrometer heads are available to positively lock the micrometer setting. Not available formodels 99MM, 101MM, 201MM, 301MM.
• Space saving side mount micrometer head style available. Please inquire.
• Loads in Z axis will extend springs if too heavy. Series 400MM, 500MM, 700MM, 1200MM, 2200MMand 3200MM have micrometer bracket reversed to prevent this and increase Z axis capacity
• Custom designs quoted on request.
• Inch threaded mounting holes optional at no cost.
• P style (plain) are free floating slides without micrometer head, brackets or springs.
• (P-PL) Plain with Posi-Lock™ available, only on 1200MM, 2200MM, & 3200MM series.
Nomenclature
Part numbering system for positioning stages
XXXX
Basic model number
X
(P) Denotes plain model no micrometer head, bracket or springs
(M) Metric micrometer heads with standard inch threaded holes
(MM) Metric threaded holes with metric micrometer heads (LM) Locking micrometer head
(LO) Low profile Z axis
(PL) Posi-lock carriage lock
Options
(X) Single axis
(XY) Double axis
(XYZ) Triple axis
XX XXX
46
Ball SlidePositioningStages
99MM101MM201MM301MM
450MM451MM453MM750MM751MM753MM
401MM501MM502MM701MM702MM
1201MM1203MM2201MM2202MM2203MM2204MM3201MM3202MM3203MM3204MM
6131313
13 25 13132513
1313251325
25252550255025502550
19.1 x 19.131.8 x 31.844.5 x 44.538.1 x 38.1
44.5 x 44.544.5 x 44.544.5 x 44.566.5 x 66.566.5 x 66.566.5 x 66.5
50.8 x 44.582.6 x 44.582.6 x 44.5
101.6 x 66.5101.6 x 66.5
79.2 x 79.279.2 x 79.2
104.6 x 104.6104.6 x 104.6104.6 x 104.6104.6 x 104.6130.2 x 130.2130.2 x 130.2130.2 x 130.2130.2 x 130.2
57.982.695.388.9
111.3149.4111.3133.4171.5133.4
117.3148.8188.2168.1209.6
184.2184.2208.6260.4209.6260.4235.0285.8235.0285.8
13.59.79.7
15.7
19.119.119.125.425.425.4
19.119.119.125.425.4
23.123.123.123.123.123.123.123.123.123.1
2.31.81.85.4
9.19.19.1
27.227.227.2
9.119.019.027.227.2
13.613.613.613.613.613.613.613.613.613.6
.7
.7
.7
.9
.9
.9
.9
.9
.9
.9
9.09.09.09.09.0
13.613.613.613.613.613.613.613.613.613.6
NONONO
8 DIA.
NONO
13 DIA.NONO
25 DIA.
NONONONONO
NO25 DIA.
NONO
38 DIA.38 DIA.
NONO
51 DIA.51 DIA.
PLAIN MODELS (WITHOUT MICROMETER, BRACKETS OR SPRINGS). X AND XY CONFIGURATIONS ONLY.
101PMM201PMM301PMM451PMM452PMM751PMM752PMM
1202PMM1204PMM2205PMM2206PMM3205PMM3206PMM
13131325252525
50507575
100100
31.8 x 31.844.5 x 44.538.1 x 38.144.5 x 44.544.5 x 44.566.5 x 66.566.5 x 66.5
79.2 x 79.279.2 x 79.2
104.6 x 104.6104.6 x 104.6130.2 x 130.2130.2 x 130.2
———————
——————
9.79.7
15.719.119.125.425.4
23.123.123.123.123.123.1
1.81.85.49.19.1
27.227.2
13.613.613.613.613.613.6
———————
——————
NONO
8 DIA.NO
13 DIA.NO
25 DIA.
NO25 DIA.
NO38 DIA.
NO51 DIA.
MODEL TRAVEL
WORKSURFACE
A X B L Hx X, XY Z
OVERALLDIMENSIONS
LOADCAPACITY, kg
THROUGHHOLE
SPECIFICATIONS:
Straight Line Accuracy .013mm/25mm of travel
Repeatability .003mm
Coefficient .003 typical
Construction Aluminum carriage and base, hardened steel shafts and balls, mild steel end caps.
Finish Black anodize standard. Other finishes on request.
Dimensions in mm
moment load ratings + load / life formulas. pg.94
47
13.5
"Z" Bracket
KnurledLocking Screw
26.9
2.5
5.6Nominal
14.3
19
13.5 7.9
.8
7.9
57.9Nominal
13.5 C'Bore ForM2 - 4 Holes
M2 - 8 Holes KnurledLocking Screw
19
14.3
13.5
M
Hx
C'Bore for M2 - 4 Holes
L (Nominal)G
L
N
1915.7
M2 - 10 Holes
B D F
ECA
32.1Nominal
5.7
"Z" Bracket
SERIES 99MM
SERIES 100MM, 200MM
OPTIONAL POSI-LOCK™ FORSERIES 100MM, 200MM
Space saving side mount micrometer head style is available. Please inquire.
MODEL101MM201MM
C 25.438.1
E 17.530.2
G 9.711.3
M 25.438.1
N 17.530.2
O 23.936.6
P32.138.5
F 12.725.4
D 25.438.1
Dimensions in mm
Dimensions in mm
7.9
14.3
7.913.5
P
O
48
"Z" Bracket
L
Hy
C
DXYZ LOW PROFILE
L
XYZ STANDARD
Slot
JHy
K"Z" Bracket
30.1
8 Dia
4.1
M3 - 4 holes
1.00(25.4)
.13 DiaOptional
2 holes on33.3 B.C.
M46 holes
33.325.4 DiaOptional
M5 - 8 holeson 50.8 B.C.
A-2
A9.7
L (Nominal)
B
Center HoleSlot in Base
MN
Hx
C'Bore forMounting Screw
2 Holes
6.1 60.8Nominal
4.1
30.1
9.7 25.4
33.3
SERIES300MM450MM750MM
M30.133.350.8
MODEL301MM450MM, 453MM451MM750MM, 753MM751MM
P29.545.060.745.560.7
O22.222.238.1
MTG.SCREWC’BORE
M3M4M5
SERIES 300MM SERIES 450MM SERIES 750MM
OPTIONAL POSI-LOCK ™ FOR SERIES 300MM, 450MM, 750MM
SERIES 300MM, 450MM, 750MM
SERIES 300MM, 450MM, 750MM
Space saving side mount micrometer head style is available. Please inquire.
SERIES 300MM 450MM 750MM
C 11.217.517.5
J 41.150.866.5
SLOT10 x 2213 x 2525 x 38
Hy 31.838.150.8
K 8.1 — 1.5
D 25.428.438.1
Dimensions in mm
Dimensions in mm
(see table)
30.14.1
4.1
30.1
9.7
9.7 25.4
25.4
25.4
P
o
49
L (nominal)
Hx
MC'Bore 2 HolesSee Table
A
CE
DB
Thread - See Table
6.4
60.7Nominal
Hy
L
JK
"Z" BRACKET
"Y" STACKING PLATE4.8 Thick
L
12.7
28.4
Hy
"Z" BRACKET
"Y" STACKINGPLATE 4.8 Thick
L
J
K
Hy
SLOT"Z" BRACKET
L (N ominal)
Hx
MC'Bore for M52 Holes
31.8DCB
DA
31.8
M5
L(Nominal)
5.9
SERIES 400MM, 500MM, 700MM
SERIES 1200MM, 2200MM, 3200MM
Space saving side mount micrometer head style is available. Please inquire.
SERIES400MM500MM700MM
J—
39.652.3
K——8.1
Hy42.942.955.6
OPTIONAL POSI-LOCK™ FOR SERIES 400MM, 500MM, 700MM
OPTIONALPOSI-LOCK™ FOR SERIES1200MM, 2200MM, 3200MM
C 12.714.025.4
E 6.46.4
12.7
C’BORE FORM4M4M5
M41.169.985.9
O22.222.238.1
THREADM4M4M5
NO. HOLES 8
128
D 22.222.231.8
XYZ STANDARD MODELS (500MM & 700MM XYZ)(Z MICROMETER REVERSED)401MM-XYZ AVAILABLE
LOW STYLE ONLY
XYZ STANDARD MODELS(Z MICROMETER REVERSED)
SERIES 1200MM2200MM3200MM
J 65.578.278.2
SLOT25.4 x 50.8 38.1 x 63.5 50.8 x 101.6
Hy46.246.246.2
K 8.413.227.7
SERIES 1200MM2200MM3200MM
C 66.792.1117.5
M66.792.1117.5
CENTER HOLE
(OPTIONAL)DIA. 25DIA. 38DIA. 50
D 54.079.4
104.8
1201MM,1202MM: P= 44.52201MM,2202MM: P= 57.23201MM,3202MM: P= 69.9
Dimensions in mm
Dimensions in mm
31.5
P
P
33.3o
MODEL401MM, 501MM, 701MM502MM, 702MM
P45.060.7
(Nominal)
50
6 Reasons to chooseDel-Tron® Crossed RollerPositioning Stages
Del-Tron®
Crossed Roller PositioningStages
Del-Tron offers over 60 models of positioning slides.
Used for gaging and positioning light andmedium loads, applications include measuring instruments and optical assemblies. Del-Tron® positioners, built withthe same rigorous manufacturing demandsas our crossed roller slide assemblies, offerthe benefits of quality construction.
Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. (Micrometersavailable in inch or metric units.) Slides provide accuracy to .003mm/25mm of traveland repeatability of .003mm. Over 60 models,support load capacities to 73 kg. Our full lineincludes the subminiature series with thesmallest commercially available positioner,the standard series, ideal for most gagingand positioning applications, and our heavyduty series providing high load capacitieswith the same high accuracy and repeatability.
Positioning slides can be stacked for multiaxis applications. Standard stacked unitsare available in XY and XYZ configurations.Preloaded positioning slides, fully assembled,arrive ready for your use.
Positioners are available in black anodizedfinish or other finishes on request.
1. High Capacity- Greater loadbearing capacity than ball types. Better for impacts and overhangingloads.
2. Straight Line Accuracy- Runout of.003mm/25mm of travel.
3. Wide Range- Carriages up to 130mm square with 50mm of travel.
4. Smooth Accurate Movement-Spring forces hold carriage againstmicrometer head. Factory adjustedpreload offers friction free running.
5. Subminiature Sizes: R99MM among thesmallest commercially available roller stages 19mm square.
6. Positive Locking- Posi- Lock™feature guards against movementcaused by vibration or impact.
Crossed Roller PositioningStages (Micrometer Driven)
51
• Posi-Lock™ feature consists of a steel shim and extended micrometer bracket secured by a screw mounted to the side of the stage carriage. This allows the user to positively lock the position of the carriage during use. Posi-Lock™ is standard optional on all stages.
• Locking micrometer heads are available to positively lock the micrometer setting. Not available formodels R101MM, R201MM, R301MM.
• Space saving side mount micrometer head style available. Please inquire.
• Loads in Z axis will extend springs if too heavy. Series R400MM, R500MM, R700MM, R1200MM,R2200MM and R3200MM have micrometer bracket reversed to prevent this and increase Z axiscapacity.
• Custom designs quoted on request.
• Inch threaded mounting holes optional at no cost.
• P style (plain) are free floating slides without micrometer head, brackets or springs.
• P-PL Plain with Posi-Lock™ available. Only on R1200MM, R2200MM, & R3200MM series.
Nomenclature
Part numbering system for positionig stages
XXXX
Basic model number
X
(P) Denotes plain model no micrometer head, bracket or springs
(M) Metric micrometer heads with standard inch threaded holes
(MM) Metric threaded holes with metric micrometer heads (LM) Locking micrometer head
(LO) Low profile Z axis
(PL) Posi-lock carriage lock
(SD) Side mount micrometer head
Options
(X) Single axis
(XY) Double axis
(XYZ) Triple axis
XX XXX
52
Crossed RollerPositioningStages
R99MMR101MMR201MMR301MM
R450MMR451MMR453MMR750MMR751MMR753MM
R401MMR501MMR502MMR701MMR702MM
R1201MMR1203MMR2201MMR2202MMR2203MMR2204MMR3201MMR3202MMR3203MMR3204MM
6131313
132513132513
1313251325
25252550255025502550
19.1 x 19.131.8 x 31.844.5 x 44.538.1 x 38.1
44.5 x 44.544.5 x 44.544.5 x 44.566.5 x 66.566.5 x 66.566.5 x 66.5
50.8 x 44.582.6 x 44.582.6 x 44.5
101.6 x 66.5101.6 x 66.5
79.2 x 79.279.2 x 79.2
104.6 x 104.6104.6 x 104.6104.6 x 104.6104.6 x 104.6130.2 x 130.2130.2 x 130.2130.2 x 130.2130.2 x 130.2
57.982.695.388.9
111.3149.4111.3133.4171.5133.4
117.3148.8188.2168.1209.6
184.2184.2209.6260.4209.6260.4235.0285.8235.0285.8
13.59.79.7
15.7
19.119.119.125.425.425.4
19.119.119.125.425.4
23.123.123.123.123.123.123.123.123.123.1
18.110.410.418.1
18.118.118.154.454.454.4
18.136.336.372.572.5
38.538.538.538.538.538.538.538.538.538.5
.7
.7
.7
.9
.9
.9
.9
.9
.9
.9
9.09.09.09.09.0
13.613.613.613.613.613.613.613.613.613.6
NONONO
8 DIA.
NONO
13 DIA.NONO
25 DIA.
NONONONONO
NO25 DIA.
NONO
38 DIA.38 DIA.
NONO
51 DIA.51 DIA.
PLAIN MODELS (WITHOUT MICROMETER, BRACKETS OR SPRINGS), X AND XY CONFIGURATIONS ONLY.
R101PMMR201PMMR301PMMR451PMMR452PMMR751PMMR752PMM
R1202PMMR1204PMMR2205PMMR2206PMMR3205PMMR3206PMM
13131325252525
50507575
100100
31.8 x 31.844.5 x 44.538.1 x 38.144.5 x 44.544.5 x 44.566.5 x 66.566.5 x 66.5
79.2 x 79.279.2 x 79.2
104.6 x 104.6104.6 x 104.6130.2 x 130.2130.2 x 130.2
———————
——————
9.79.7
15.719.119.125.425.4
23.123.123.123.123.123.1
10.410.418.118.118.154.454.4
38.538.538.538.538.538.5
———————
——————
NONO
8 DIA.NO
13 DIA.NO
25 DIA.
NO25 DIA.
NO38 DIA.
NO51 DIA.
MODEL TRAVEL A X B L Hx X, XY Z
WORKSURFACE
OVERALLDIMENSIONS
LOADCAPACITY, kg
THROUGHHOLE
Specifications:
Straight line accuracy .003mm/25mm of travelRepeatability .003mm
Coefficient of friction 0.003 typical
Drive Micrometer, .01 mm graduations
Construction Aluminum carriage and base, hardenedsteel shafts and balls, mild steel endcaps
Finish Black anodize standard;other finishes on request
Dimensions in mm
moment load ratings + load / life formulas. pg.94
53
M
Hx
C'Bore for M2 - 4 Holes
L (Nominal)G
L
N
1915.7
M2 - 10 Holes
B D F
ECA
32.1Nominal
5.7
"Z" Bracket
SERIES R100MM, R200MM
13.5
"Z" Bracket
KnurledLocking Screw
26.9
2.5
5.6Nominal
14.3
19
13.5 7.9
.8
7.9
57.9Nominal
13.5 C'Bore ForM2 - 4 Holes
M2 - 8 Holes KnurledLocking Screw
19
14.3
13.5
OPTIONAL POSI-LOCK™ FORSERIES R100MM, R200MM
SERIES R99MM
MODELR101MMR201MM
C 25.438.1
E 17.530.2
M25.438.1
N17.530.2
O23.936.6
P32.138.5
G9.711.3
F 12.725.4
D 25.438.1
Space saving side mount micrometer head style is available. Please inquire.
Dimensions in mm
Dimensions in mm
7.9 7.913.5
P
NO
54
"Z" Bracket
L
Hy
C
DXYZ LOW PROFILE
L
XYZ STANDARD
Slot
JHy
K"Z" Bracket
SERIES R300MM, R450MM, R750MM
30.1
8 Dia
4.1
M3 - 4 holes
1.00(25.4)
.13 DiaOptional
2 holes on33.3 B.C.
M46 holes
33.325.4 DiaOptional
M5 - 8 holeson 50.8 B.C.
A-2
A9.7
L (Nominal)
B
Center HoleSlot in Base
MN
Hx
C'Bore forMounting Screw
2 Holes
6.1 60.8Nominal
4.1
30.1
9.7 25.4
SERIES R300MM, R450MM, R750MM
SERIES R300MM R450MM R750MM
C 11.217.517.5
J 41.150.866.5
SLOT8 x 22
13 x 2525 x 38
Hy 31.838.150.8
K 8.1 — 1.5
D 25.428.438.1
SERIESR300MMR450MMR750MM
M30.133.350.8
O22.222.238.1
MTG.SCREWC’BORE
M3M4M5
Space saving side mount micrometer head style is available. Please inquire.
Dimensions in mm
Dimensions in mm
4.1 30.1
OPTIONAL POSI-LOCK™ FOR SERIES R300MM, R450MM, R750MM
4.1
30.1 25.4
9.7
9.7 25.4
25.4
P
33.3o
P29.545.060.745.060.7
MODELR301MMR450MM, 453MMR451MMR750MM, 753MMR751MM
SERIES R300MM SERIES R450MM SERIES R750MM
(Nominal)
55
L (nominal)
Hx
MC'Bore 2 HolesSee Table
A
CE
DB
Thread - See Table
6.4
60.7Nominal
Hy
L
JK
"Z" BRACKET
"Y" STACKING PLATE4.8 Thick
L
12.7
28.4
Hy
"Z" BRACKET
"Y" STACKINGPLATE 4.8 Thick
SERIES R400MM, R500MM, R700MM
L
J
K
Hy
SLOT"Z" BRACKET
L (N ominal)
Hx
MC'Bore for M52 Holes
31.8DCB
DA
31.8
M5
L(Nominal)
5.9
SERIES R1200MM, R2200MM, R3200MM
SERIESR400MMR500MMR700MM
J—
39.652.3
K——8.1
Hy42.942.955.6
SERIES R400MMR500MMR700MM
C 12.714.025.4
E 6.46.412.7
C’BORE FORM4M4M5
M41.169.985.9
O22.222.238.1
THREADM4M4M5
NO.HOLES
8128
D 22.222.231.8
XYZ STANDARD MODELS(Z MICROMETER REVERSED)
MODEL R401MM-XYZ AVAILABLE LOW STYLE ONLY
MODEL R500MM & R700MM XYZ
OPTIONAL POSI-LOCK™FOR SERIES R1200MM, R2200MM,R3200MM
XYZ STANDARD MODELS(Z MICROMETER REVERSED)
SERIES R1200MMR2200MMR3200MM
J 65.578.278.2
SLOT25.4 x 50.838.1 x 63.550.8 x 101.6
Hy46.246.246.2
K 8.413.227.7
SERIES R1200MMR2200MMR3200MM
C 66.792.1117.5
M66.792.1117.5
CENTER HOLE
(OPTIONAL)25 Dia.38 Dia.50 Dia.
D 54.079.4
104.8
R1201MM,R1202MM: P= 44.5R2201MM,R2202MM: P= 57.2R3201MM,R3202MM: P= 69.9
Space saving side mount micrometer head style is available. Please inquire.
Dimensions in mm
Dimensions in mm
31.8
31.5
33.3oP
P
MODELR401MM,R501MM,R701MMR502MM,R702MM
P45.060.7
OPTIONAL POSI-LOCK™ FOR SERIES R400MM, R500MM, R700MM
Nominal
56
1. Versatile- Reduced overall length makesDel-Tron®® Side Drive stages ideal forrestricted space applications.
2. Posi- Lock™- Optional positive lockingfeature prevents movement of carriage.
3. Accurate Measurements: Carriages arespring loaded against micrometer headswith 0.01mm graduations.
4. Adaptable- One, two or threeaxis models can be used in any orientation.
5. Easy To Use- Metric counterbored holesin base and metric threaded holes incarriage.
6. Wide Selection- Subminiature and low profilemodels.
Compact Side Drive Positioners6 Reasons to chooseDel-Tron®® Side Drive Positioning Stages
Del-Tron®®
Side Drive PositioningStages
Del-Tron offers over 50 models of positioning slides. (Available in either ballbearing or crossed roller type.)
Used for gauging and positioning light andmedium loads, applications include measuring instruments and optical assemblies. Del-Tron®positioners, built withthe same rigorous manufacturing demands asour ball slide assemblies, offer the benefits ofquality construction.
Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. (Micrometersavailable in inch or metric units.) Slides provide accuracy to .003mm/25mm of traveland repeatability of .003mm. Models cansupport load capacities to 73kg. Our full lineincludes the subminiature series with thesmallest commercially available positioner, thestandard series, ideal for most gauging andpositioning applications, and our heavy dutyseries providing high load capacities with thesame high accuracy and repeatability.
Positioning slides can be stacked for multiaxis applications. Standard stacked unitsare available in XY and XYZ configurations.Preloaded positioning slides, fully assembled,arrive ready for your use.
Positioners are available in black anodizedfinish or other finishes on request.
57
• Posi-Lock™ feature consists of steel shim and extended micrometer bracket secured by a screwmounted to the side of the micrometer bracket. This allows the user to positively lock the position of thecarriage during use. Posi-Lock™ is standard on the model 99SDMM, R99SDMM and optional on allothers.
• Locking micrometer heads are available to positively lock the micrometer setting. Not available formodels 99SDMM, 101SDMM, 201SDMM, 301SDMM, R99SDMM, R101SDMM, R201SDMM, R301SDMM
• Custom designs quoted on request.
• Metric threaded mounting holes optional at no additional cost.
Part numbering systemfor positioning stages
XXXXX
Basic model number
(Blank) Ball
(R) Crossed Roller
(LM) Locking micrometer head
(LO) Low profile Z axis
(PL) Posi-Lock™ carriage lock
Options
(X) Single axis
(XY) Double axis
(XYZ) Triple axis
XX XXX
Nomenclature
58
Side DrivePositioningStages
99SDMM101SDMM201SDMM301SDMM
450SDMM451SDMM453SDMM750SDMM751SDMM753SDMM
401SDMM501SDMM502SDMM701SDMM702SDMM
1201SDMM1203SDMM2201SDMM2202SDMM2203SDMM2204SDMM3201SDMM3202SDMM3203SDMM3204SDMM
6.4 13 13 13
13 25 13 13 25 13
13 13 25 13 25
25 25 25 50 25 50 25 50 25 50
19.1 x 19.131.8 x 31.844.5 x 44.538.1 x 38.1
44.5 x 44.544.5 x 44.544.5 x 44.566.5 x 66.566.5 x 66.566.5 x 66.5
50.8 x 44.582.6 x 44.582.6 x 44.5
101.6 x 66.5101.6 x 66.5
79.2 x 79.279.2 x 79.2
104.6 x 104.6104.6 x 104.6104.6 x 104.6104.6 x 104.6130.0 x 130.0130.0 x 130.0130.0 x 130.0130.0 x 130.0
37.654.961.555.4
74.9114.574.989.4
113.889.4
74.9105.4114.5124.5131.6
120.7120.7120.7171.7120.7171.7130.0171.7130.0171.7
13.59.79.7
15.7
19.119.119.125.425.425.4
19.119.119.125.425.4
23.123.123.123.123.123.123.123.123.123.1
2.31.81.85.4
9.19.19.1
27.227.227.2
9.119.019.027.227.2
13.613.613.613.613.613.613.613.613.613.6
.7
.7
.7
.9
.9
.9
.9
.9
.9
.9
9.09.09.09.09.0
13.613.613.613.613.613.613.613.613.613.6
NONONO
8 DIA.
NONO
13 DIA.NONO
25 DIA.
NONONONONO
NO25 DIA.
NONO
38 DIA.38 DIA.
NONO
51 DIA.51 DIA.
MODEL TRAVEL* WORKSURFACE
L
OVERALLDIMENSIONS
LOADCAPACITY, Kg
THROUGHHOLE
Hx X, XY Z
R99SDMMR101SDMMR201SDMMR301SDMM
R450SDMMR451SDMMR453SDMMR750SDMMR751SDMMR753SDMM
R401SDMMR501SDMMR502SDMMR701SDMMR702SDMM
R1201SDMMR1203SDMMR2201SDMMR2202SDMMR2203SDMMR2204SDMMR3201SDMMR3202SDMMR3203SDMMR3204SDMM
BallSlide
CrossedRollerSlide
18.110.410.418.1
18.118.118.154.454.454.4
18.136.336.372.572.5
38.538.538.538.538.538.538.538.538.538.5
.6
.6
.6
.9
.9
.9
.9
.9
.9
.9
9.09.09.09.09.0
13.613.613.613.613.613.613.613.613.613.6
X, XY Z
BallSlide
CrossedRollerSlide
32.744.557.451.1
61.064.861.083.187.183.1
61.061.064.884.187.1
102.6102.6128.0128.0128.0128.0153.4153.4153.4153.4
WA X B
*Travel is 1/2 distance from center in either direction.moment load ratings + load / life formulas. pg. 94
Specifications:
Straight Line Accuracy Ball: .013mm/25mm of travelRoller: .003mm/25mm of travel
Repeatability Ball: .005mmRoller: .003mm
Coefficient of Friction 0.003 typical
Drive Micrometer, .01 mm graduations standard
Construction Aluminum carriage and base, hardenedsteel shafts and balls or rollers, mild steelendcaps
Finish Black anodize standard;other finishes on request
59
SERIES 99SDMM, R99SDMMDimensions in mm
SERIES 100SDMM, 200SDMM, R100SDMM, R200SDMM
9.711.2
OPTIONAL POSI-LOCK™ FOR SERIES 100SDMM, 200SDMM,
R100SDMM, R200SDMM101SDMM, R101SDMM201SDMM, R201SDMM
XYZXYZ
MODEL G
Dimensions in mm
ROLLERSERIESR100SDMMR200SDMM
C
25.438.1
E
17.530.2
M
25.438.1
N
17.530.2
F
12.725.4
D
25.438.1
BALLSERIES100SDMM200SDMM
P
15.515.5
O
23.936.6
60
SERIES 300SDMM, 450SDMM, 750SDMM,R300SDMM, R450SDMM, R750SDMM
SERIES 300SDMM, 450SDMM, 750SDMM,R300SDMM, R450SDMM, R750SDMM
C
11.217.523.9
J
38.1—
66.5
SLOT
9.7 x 22.412.7 x 25.425.4 x 38.1
Hy
31.838.150.8
K
8.0— 7.6
D
25.428.538.1
BALLSERIES300SDMM450SDMM750SDMM
BALLSERIES
301SDMM450SDMM451SDMM453SDMM750SDMM751SDMM753SDMM
M
30.233.350.8
P
16.025.625.625.626.138.238.2
MTG.SCREWC’BORE
M3M4M5
XYZ LOW PROFILE
XYZ STANDARD
BALLSERIES 300SDMM 450SDMM 750SDMM
ROLLERSERIES R300SDMM R450SDMM R750SDMM
ROLLERSERIESR300SDMMR450SDMMR750SDMM
O
22.222.238.1
ROLLERSERIES
R301SDMMR450SDMMR451SDMMR453SDMMR750SDMMR751SDMMR753SDMM
MODEL
OPTIONAL POSI-LOCK™ FOR SERIES300SDMM, 450-SDMM, 750SDMM,
R300SDMM, R450SDMM, R750SDMM
SERIES 300SDMM,R300SDMM
SERIES 450SDMM,R450SDMM
SERIES 750SDMM,R750SDMM
M-3
M-46 holes
M-58 holes on50.8 B.C.
61
SERIES 400SDMM, 500SDMM, 700SDMM,R400SDMM, R500SDMM, R700SDMM
ROLLERSERIES400SDMM500SDMM700SDMM
J
49.349.365.0
K
14.6-
9.3
Hy
42.942.955.6
OPTIONAL POSI-LOCK™ FOR SERIES1200SDMM, 2200SDMM, 3200SDMM,
R1200SDMM, R2200SDMM, R3200SDMM
C
12.713.925.4
E
6.46.4
12.7
C’BOREFORM4M4M5
M
41.169.985.9
THREAD
M4M4M5
NO.HOLES
8128
D
22.222.231.8
BALLSERIES1200SDMM2200SDMM3200SDMM
J
65.578.278.2
SLOT
25.4 x 50.838.1 x 63.5
50.8 x 101.6
Hy
46.246.246.2
K
8.413.227.7
C
66.792.1117.5
P
44.555.669.9
M
66.792.1117.5
CENTER HOLE(OPTIONAL)25MM DIA38MM DIA50MM DIA
D
54.079.4
104.8
ROLLERSERIESR400SDMMR500SDMMR700SDMM
ROLLERSERIESR1200SDMMR2200SDMMR3200SDMM
O
22.222.238.1
MODEL401SDMM501SDMM502SDMM701SDMM702SDMM
P25.625.638.226.138.2
MODELR401SDMMR501SDMMR502SDMMR701SDMMR702SDMM
OPTIONAL POSI-LOCK™
FOR SERIES400SDMM, 500SDMM, 700SDMM,
R400SDMM, R500SDMM, R700SDMM
XYZ STANDARD MODELS
401SDMM-XYZ, R401SDMM-XYZ
AVAILABLE LOW STYLEONLY
XYZ STANDARD MODELS
SERIES 1200SDMM, 2200SDMM, 3200SDMM,R1200SDMM, R2200SDMM, R3200SDMM
62
6 Reasons to chooseDel-Tron® Low ProfileCrossed RollerSlide Tables
1. Compact & Low Profile.
2. High Accuracy (.003mm/25mm) Travel.
3. Metric Type Mounting Holes.
4. Light Weight Aluminum Carriage.
5. Stainless Steel Models Available.
6. 21 Size & Travel Combinations.
Low ProfileSlide TablesDel-Tron® LPTA slides are low profile, highaccuracy slide tables featuring easilyadjustable preload and light weight aluminumcarriage. Standard metric type threadedholes allow easy mounting and installation.The bearing base consists of a two sidedsingle inner rail flanked by two precision V grooved outer rails. High precision rollers captive in a stainless steelcage and positive internal travel stops assuresmooth accurate reciprocating motion.
Stainless steel models (ss) offer aluminumcarriage with stainless steel rails, rollers,cages and fasteners.
LPTA slides are ideal anywhere low frictionreciprocating mechanisms are used in automated equipment.
Low Profile Crossed RollerSlide Tables
63
Low ProfileCrossed RollerTablesSpecifications:
Straight Line Accuracy .003mm/25mm of travel.
Positional Repeatability .003mm
Coefficient of Friction 0.003 typical
Construction Aluminum carriage, hardened steel crossed roller rail set with double v-grooved inner rail.
Finish Black anodized carriage, hardened steel base.
BASE MOUNTING DIMENSIONS
Length, Travel, and Load Selection
LPTA-1025LPTA-1035LPTA-1045LPTA-1055LPTA-1065LPTA-1075LPTA-1085
LPTA-2035LPTA-2050LPTA-2065LPTA-2080LPTA-2095LPTA-2110LPTA-2125
LPTA-3055LPTA-3080LPTA-3105LPTA-3130LPTA-3155LPTA-3180LPTA-3205
SSSSSSSSSSSSSS
SSSSSSSSSSSSSS
SSSSSSSSSSSSSS
12182532404550
18304050607080
3045607590
105130
25354555657585
3550658095
110125
5580
105130155180205
23324754607379
40637595105120130
126183220275310355375
2244444
2244444
2444444
18253848556575
253555708595110
406890115140165190
——2529313540
——3340455055
—435565958590
4444646
4444646
4444646
181 x 281 x 201 x 302 x 201 x 302 x 30
1 x 281 x 431 x 301 x 452 x 301 x 452 x 45
1 x 401 x 651 x 501 x 752 x 501 x 752 x 75
Dimensions in mm
MODELSTAINLESS
STEELTRAVEL
TLENGTH
L
LOADCAPACITY
kgfNO.
HOLESSPACING
U W
BASE MOUNTING HOLES(COUNTERBORED)
NO.HOLES
SPACINGM
CARRIAGEMOUNTING HOLES
(THREADED)
D
W
d
UR
L
X
H
X
TL2
h
moment load ratings + load / life formulas. pg.95
64
Mounting Dimensions
LPTA-1025
LPTA-1035
LPTA-1045
LPTA-1055
LPTA-1065
LPTA-1075
LPTA-1085
LPTA-2035
LPTA-2050
LPTA-2065
LPTA-2080
LPTA-2095
LPTA-2110
LPTA-2125
LPTA-3055
LPTA-3080
LPTA-3105
LPTA-3130
LPTA-3155
LPTA-3180
LPTA-3205
3.5
3.5
12.5
12.5
12.5
22.5
12.5
3.5
3.5
17.5
17.5
17.5
32.5
17.5
7.5
7.5
27.5
27.5
27.5
52.5
27.5
14
—
—
—
—
—
—
22
—
—
—
—
—
—
30
—
—
—
—
—
—
M2
—
—
—
—
—
—
M4
—
—
—
—
—
—
M5
—
—
—
—
—
—
3.5
—
—
—
—
—
—
5.5
—
—
—
—
—
—
7.5
—
—
—
—
—
—
3.5
5
3.5
3.5
5
5
5
5
7.5
5
5
5
7.5
7.5
7.5
6
7.5
7.5
7.5
7.5
7.5
3.9
—
—
—
—
—
—
6.1
—
—
—
—
—
—
8.3
—
—
—
—
—
—
2.6
—
—
—
—
—
—
4
—
—
—
—
—
—
5.2
—
—
—
—
—
—
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.8
3.8
3.8
3.8
3.8
3.8
3.8
5.2
5.2
5.2
5.2
5.2
5.2
5.2
Dimensions in mm
C’BOREFORM2
C’BOREFORM3
C’BOREFORM4
SERIES N PTHREAD
JDEPTH
KSPACING
RCOUNTERBORE
D d hSPACING
CARRIAGE BASE
LPTA-1000
LPTA-2000
LPTA-3000
8
12
16
20
30
40
4
6
8
6.6
12
16
Dimensions in mm
Profile Dimensions
SERIES
HEIGHTA
±0.1
WIDTHB
±0.1
BASETHICKNESS
C
BASEWIDTH
X
CARRIAGE MOUNTING DIMENSIONSC
B
A
X
K
J
M
P
N
moment load ratings + load / life formulas. pg.95
65
6 Reasons to chooseDel-Tron® Crossed RollerRail Sets
1. Versatile- May be adapted to your ownbase and carriage design.
2. Rugged- Hardened steel v-grooved rails and rollers withstand heavy loads andimpacts.
3. Corrosion Resistant- Stainless steel available from stock.
4. High Accuracy- Parallelism of 0.002mmover 100mm.
5. Easy To Use- Standard threaded and counterbored mounting holes allow access from either side.
6. Interchangeable- Form, fit and functionalreplacement for other manufacturer’s rails.
Del-Tron®
Crossed RollerRail Sets
Crossed Roller Linear Bearings are compact,precision bearings that can support and guidehigh loads with high accuracy and repeatability,low friction, and low starting force. A completerange of sizes is supplied for use in precisionmachine tools, measuring instruments, assemblyfixtures, medical instruments, and anywhere linear or reciprocating motion with high reliabilityand long life is required.
ConstructionEach bearing consists of a pair of hardenedsteel ways containing 90° vee grooves, and arow of alternately crossed cylindrical rollers. Thehardened steel rollers are captive in a stainlesssteel cage for easy handling and assembly andpermanent alignment. The ways are installedface to face by the user, with the rollers betweenthe vee grooves.
Stainless Steel also available.
ApplicationBearings are normally supplied and installed insets of two to form an assembly that can supporttheir rated load in any direction or orientation,and can be preloaded to eliminate side play.
Mounting and banking surfaces must be smoothand flat, and accurately parallel, coplanar, orperpendicular respectively to achieve maximumaccuracy. Preload forces must be evenly distributed. Dirt and dust must be excluded.Lubrication required depends on the application,ranging from light grease or oil at the time ofinstallation for low speeds (less that1270mm/min.) and occasional movement to continuous oil bath or mist at 30,000mm/min.
Crossed Roller Rail Sets
66
Ratings and SpecificationsLoad ratings in the tables are dynamic ratings for each set. Ratings are based on theoretical data, properinstallation, appropriate lubrication, and a predicted life of 250 million mm. Ratings are suggested only, based onstandard and typical industry practice, and cannot be guaranteed. Life can be increased approximately 10 times byoperating a given bearing at 1/2 its rated load, other factors being constant. Temperature of bearings must notexceed 100°C , even for short periods, since this will reduce hardness and result in significantly reduced loadcapacity and working life.
B
A
A
B
10.16
7.62
5.08
2.54
0 254 508 762 1016 1270 1524 mm
microns
Maximum deviation from parallelism between the vee groove faceand datum faces of each way bar is shown in the graph. Actualaccuracy achieved depends on proper installation.
Mounting holes in the way bars arethreaded, and also counterbored toalternatively permit using the next smallersize screw with threaded mounting holesin the user’s components.
OrderingOrder standard bearing sets from table by modelnumber according to load and travel required.
Each set consists of two complete bearings(4 way bars, 2 roller cages, and end stops).Delivery stock to 6 weeks.
67
Crossed RollerRail Sets
B
LS
M2 M
AF
d
H
C
G
E
+0.00- 0.30
D
M M2
Length, Travel, and Load Selection
NB-1020NB-1030NB-1040NB-1050NB-1060NB-1070NB-1080
NB-2030NB-2045NB-2060NB-2075NB-2090NB-2105NB-2120NB-2135NB-2150NB-2165NB-2180
NB-3050NB-3075NB-3100NB-3125NB-3150NB-3175NB-3200
57
1013161921
58
111316182123262932
7101417212428
20304050607080
3045607590
105120135150165180
5075
100125150175200
12202732374250
18243044506470849095
100
2848587888
105115
2345678
23456789
101112
2345678
20284052647684
3048667896
108126138156173192
70100140170210240280
NB-3225NB-3250NB-3275NB-3300NB-3325NB-3350
NB-4080NB-4120NB-4160NB-4200NB-4240NB-4280NB-4320NB-4360NB-4400NB-4440NB-4480
NB-6100NB-6150NB-6200NB-6250NB-6300NB-6350NB-6400
313538424549
711151923273135394347
8121620242832
225250275300325350
80120160200240280320360400440480
100150200250300350400
135145165175195205
5882
105130150175200225250270295
5585
120150185215245
91011121314
23456789
101112
2345678
310350380419449489
140220300380459539619699779859939
320479639799959
11191278
MODEL
NO. OFROLLERS IN
EACHRETAINER
LENGTHL
TRAVELT
NO.HOLES
RAIL SETLOAD
CAPACITYkg MODEL
NO. OFROLLERS IN
EACHRETAINER
LENGTHL
TRAVELT
NO.HOLES
RAIL SETLOAD
CAPACITYkg
Please specify (SS) for Stainless Steel
Dimensions in mm
-0.35
moment load ratings + load / life formulas. pg.95
68
NB-1
NB-2
NB-3
NB-4
NB-6
8.5
12
18
22
31
4.0
6.0
8.0
11
15
3.9
5.5
8.3
10.2
14.2
*Thread Size **Hole F clears cap screw for through mounting.
SERIES A B C
1.5
2.0
3.0
4.0
6.0
D
NB-1
NB-2
NB-3
NB-4
NB-6
1.5
2.0
3
4
6
2.5
4
5
7
8.5
5
8
10
14
17
ROLLER SIZE ROLLER DIAMETER(D)mm
ROLLER DISTANCE(P)mm
INCREASE OFTRAVEL FOR EACHROLLER CUT-OFF
mm
4
6
10
20
40
ROLLER LOADCARRYING CAP.
PER ROLLERkg
1.5
2.0
2.0
2.0
3.0
S
10
15
25
40
50
1.8
2.5
3.5
4.5
6.0
M2
M3
M4
M5
M6
M1
M2
M3
M4
M5
M E F* J**
1.65
2.54
3.30
4.3
5.2
d
3.0
4.4
6.0
8.0
9.5
G
1.4
2.0
3.1
4.2
5.2
H
Profile Dimensions Mounting Dimensions
P PitchD
Modifying Length of TravelFor a given length of bearing way, since there is no slip atany load, both length of travel and load capacity depend onthe number of rollers and their pitch. The number of rollerssupplied with each standard bearing set provides a traveldistance of approximately 60% of the way length (see page48). In some cases (e.g., when mounting space is restricted)
it may be practical to increase travel at the expense of loadcapacity by removing one or more rollers instead of selectinga longer bearing. Since travel extends symmetrically aroundthe mean position, the travel increase is twice the pitch foreach roller removed. Similarly, the load capacity for the set(page 48) is reduced by twice the load capacity per roller.
Dimensions in mm
Dimensions in mm
69
6 Reasons to chooseDel-Tron Anti-CreepCrossed Roller Rail Sets
1. Designed for vertical applications andcantilevered loads.
2. Rugged- Hardened steel V-grooved railsand rollers withstand heavy loads.
3. Versatile- May be integrated into your owndesign.
4. High Accuracy- Parallelism of 0.002mm over 100mm
5. Easy to use- Standard threaded and counterbored mounting holes allow accessfrom either side.
6. Interchangeable- Form, fit and functionalreplacement for other manufacturer's Railsets.
Anti-Creep Crossed Roller Rail Sets
®
Del-TronAnti-Creep CrossedRoller Rail SetsThe Anti-Creep crossed roller rail system isbased on a new concept to prevent rollercage slippage during operation. This systemallows you to mount the rail set in anyorientation while maintaining direct rollercontact to the rail surface eliminating rollercage creep. This system is ideal for verticalapplications and where high accelerationand deceleration forces are present.
ConstructionEach bearing set contains four V-groovedRails, eight end screws, and two Anti-Creepcrossed roller retainers. The Anti-Creep crossedroller retainers utilize a studded roller anddetented rail to prevent the migration of theretainer due to vertical and cantilevered loadapplications.
ApplicationBearings are normally supplied and installed insets of two to form an assembly that cansupport their rated load in any direction ororientation, and can be preloaded to eliminateside play.
Mounting and banking surfaces must besmooth and flat, and accurately parallel,coplanar, or perpendicular respectively toachieve maximum accuracy. Preload forcesmust be evenly distributed. Dirt and dust must be excluded.Lubrication required depends on theapplication, ranging from light grease or oil atthe time of installation for low speeds1270mm/min. and occasional movement to continuous oil bath or mist at 30000 mm/min.
®
70
RATINGS AND SPECIFICATIONSLoad ratings in the tables are dynamic ratings for each set. Ratings are based on theoretical data, proper installation, appropriate lubrication, and apredicted life of 254 million mm. Ratings are suggested only, based on standard and typical industry practice, and cannot be guaranteed. Life can beincreased approximately 10 times by operating a given bearing at 1/2 its rated load, other factors being constant. Temperature of bearings must notexceed 82°C, even for short periods, since this will reduce hardness and result in significantly reduced load capacity and working life.
ACCURACYThe accuracy of a slide is measured along it’sentire length, as illustrated in Fig 2, andexpressed in terms of parallelism (Fig 1.)Actual accuracy achieved depends on properinstallation.
Mounting holes in the way bars are threaded, andalso counterbored to alternatively permit using thenext smaller size screw with threaded mountingholes in the user’s components.
Fig. 1 Fig. 2
INSTALLATION PROCEDURE
Note:
* Provide external mechanical stoppers.
* Set the movement to be less than the
specified stroke.
(1) Remove burrs, scratches, and dust from the rail mounting surface of the table and bed, and be careful
to prevent contamination during assembly.
(2) Apply low-viscosity oil to the contact surfaces, and align the table and the bed. (Figure 10a)
(3) Set the reference surface shown in Figure 4 onto the mounting surface with the rails assembled. Set
the table in the center position, and tighten the adjustment screws lightly so that almost no gap
remains. (Figure 10b)
(4) Keep the table in the center, tighten the rail mounting bolts lightly, loosen the end pieces of both end
faces, and remove the fastening plate. Following this, firmly retighten the end pieces.
(5) While maintaining the conditions of (4), gently move the assembly through its stroke being certain to
check that the speci.ed stroke length has been secured, and that there is no problem with the
operation, or any other irregularity.
(6) Move the table to the center and tighten only the adjustment screws on the R-retainer with the
recommended tightening torque as shown in Table 3. (Figure 10c)
(7) Gently move the table to one stroke end, and check that the table has surely come into contact with
the external mechanical stopper. Following this, tighten the adjustment screws on the R-retainer in the
same manner as (6). (Figure 10d)
(8) Move the table to the opposite stroke end, and tighten in the same manner as (6). (Figure 10e)
(9) Fasten the mounting bolts on rails 1, 2, and 3 by tightening with the recommended torque shown in
Table 4. (Figure 10f)
(10) Set the dial indicators to the center of the table and to the side (reference surface) of the table.
(Figure 10g)
(11) Perform the final preload adjustment. While moving the table back and forth, repeat steps (6) and (7)
until the dial indicators show a minimum deviation.
(12) Finally, securely fasten rail 4, which has been provisionally mounted, using the recommended torque.
As with the adjustment screws, successively tighten the mounting bolts on the R-retainer while
moving the table.
71
NB-2-AC
NB-3-AC
NB-4-AC
NB-6-AC
12
18
22
31
6.0
8.0
11
15
5.5
8.3
10.2
14.2
*Thread Size
SERIES A B C
2.0
3.0
4.0
6.0
D
2.0
2.0
2.0
3.0
S
15
25
40
6.0
2.5
3.5
4.5
6.0
M3
M4
M5
M6
M2
M3
M4
M5
M E F* J**
2.55
3.30
4.3
5.2
d
4.4
6.0
8.0
9.5
G
2.0
3.1
4.2
5.2
H
Profile Dimensions Mounting Dimensions
Anti-Creep CrossedRoller Rail Sets
OrderingOrder standard bearing sets from table by modelnumber according to load and travel required
Each set consists of two complete bearings (4rails, 2 roller cages, and end stops).Delivery stock to 8 weeks.
NB-2030-ACNB-2045-ACNB-2060-ACNB-2075-ACNB-2090-ACNB-2105-ACNB-2120-ACNB-2135-ACNB-2150-ACNB-2165-ACNB-2180-AC
NB-3050-ACNB-3075-ACNB-3100-ACNB-3125-ACNB-3150-ACNB-3175-ACNB-3200-AC
59
151923273339414751
9131923293541
3048667896
108126138156173192
70100140170210240280
NB-3225-AC
NB-4080-ACNB-4120-ACNB-4160-ACNB-4200-ACNB-4240-ACNB-4280-AC
NB-6100-ACNB-6150-ACNB-6200-ACNB-6250-ACNB-6300-ACNB-6350-ACNB-6400-AC
43
91723293743
9151925313539
225
80120160200240280
100150200250300350400
150
6075
105130143170
6385
135158180230275
9
234567
2345678
310
140220300380459539
320479639799959
11191280
MODEL
NO. OFROLLERS IN
EACH RETAINERLENGTH
LTRAVEL*
TNO.
HOLES
RAIL SETLOAD
CAPACITYLB MODEL
NO. OFROLLERS IN
EACH RETAINERLENGTH
LTRAVEL*
TNO.
HOLES
RAIL SETLOAD
CAPACITYLB
*Travel is 1/2 distance from center in either direction.
**Hole F clears cap screw for through mounting.
B
LS
M2 M
AF
d
H
C
G
E
+00-.014" (-0.3)
D
M M2
moment load ratings + load / life formulas. pg. 96
23456789
101112
2345678
18253040506570809095
100
2548608390
103113
3045607590
105120135150165180
5075
100125150175200
0.3
72
6 Reasons to chooseDel-Tron® Crossed RollerSlide Tables(Aluminum)
1. High accuracy and load capacity.(Precision ground V grooved waysand rollers.)
2. Withstands force in any direction.(Alternately crossed rollers 45° angle.)
3. Easy installation. (Metric threadedmounting holes in standard pattern.)
4. Corrosion Resistant-Non Contaminating(Stainless steel models available.)
5. Lightweight. (Aluminum base andcarriage.)
6. Interchangeable (with othermanufacturer’s slides.)
Del-Tron®
Crossed RollerSlide TablesOur Gold Motion Series crossed roller slidetables offer low cost and lightweight aluminum body construction to supportheavy loads with low friction and precisionlinear motion. Select from over 40 standardsizes for use in a wide range of applications - precision instruments, officeand communications equipment, surfacegrinders, tool grinders, and assembly fixtures, as examples.
Factory assembled and ready to install, eachpositioning table consists of an aluminumbase and an aluminum carriage, both precision milled, and a pair of hardened steellinear bearings. Counterbored clearanceholes, in base, permit easy mounting.Threaded holes, closely spaced in carriage,permit attaching your components withoutadditional machining. Factory preloadedbearings eliminate side play. Internal stops, inthe form of projecting screw heads betweenthe underside of the carriage and base,protect bearings from overtravel during handling.
Mount on flat surfaces to provide full supportto the base. Loads stated, may be applied inany direction. Load values are calculated forweights evenly distributed on yourpositioning table. For full life of tables, werecommend careful calculation of momentsand cantilevered loads.
Crossed Roller Slide Tables(Aluminum)
73
Crossed RollerSlide Tables(Aluminum)
Stainless Steel Models AvailableFor applications where par ticulate contamination caused by corrosion must be reduced, Del-Tron offers Gold Motion crossed rollerpositioning tables equipped with corrosion-resistant, stainless steel, crossed roller linear bearings.
TO ORDER:Add SS to model number before “AM”. For example: NBT-4085SSAM
NBT-1050AMNBT-1065AMNBT-1080AMNBT-1095AMNBT-1125AM
NBT-2035A-18MNBT-2050AMNBT-2050A-30MNBT-2065AMNBT-2065A-40MNBT-2080A-50MNBT-2080AMNBT-2095A-60MNBT-2095AMNBT-2110A-70MNBT-2125AMNBT-2125A-80MNBT-2155A-100MNBT-2185A-120M
NBT-3055AMNBT-3055A-30MNBT-3080A-45MNBT-3105AMNBT-3105A-60MNBT-3130A-75MNBT-3155AMNBT-3155A-90MNBT-3180AMNBT-3180A-105MNBT-3205AMNBT-3205A-130MNBT-3230A-155MNBT-3255A-180MNBT-3280A-205MNBT-3305A-230M
NBT-4085AMNBT-4125AMNBT-4165AMNBT-4205AMNBT-4245AM
NBT-6110AMNBT-6160AMNBT-6260AMNBT-6360AM
SSSSSSSSSS
SSSSSSSSSSSSSSSSSSSSSSSSSSSS
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
SSSSSSSSSS
SSSSSSSS
2538506475
182530384050506064707580
100120
2530455060757590
100105125130155180205230
5075
100125150
75100150225
50658095
125
355050656580809595
110125125155185
555580
105105130155155180180205205230255280305
85125165205245
110160260360
4351667389
304444525266667474859090
144174
8888
100154154170217217248248262262290310340360
196273329395462
280483728924
44888
44444888888888
4444444444888888
44444
4448
40557085
115
254040555570708585
100115115145175
3535608585
110135135160160185185210235260285
65105145185225
90140240340
——405585
—————40405555708585
115145
——————————8585
109135160185
—————
———
140
468
1014
2446688
10101214141822
224668
10101212141416182022
2468
10
248
12
1 x 152 x 153 x 154 x 156 x 15
—1 x 151 x 152 x 152 x 153 x 153 x 154 x 154 x 155 x 156 x 156 x 158 x 15
10 x 15
——
1 x 252 x 252 x 253 x 254 x 254 x 255 x 255 x 256 x 256 x 257 x 258 x 259 x 25
10 x 25
—1 x 402 x 403 x 404 x 40
—1 x 503 x 505 x 50
MODELSTAINLESS
STEELTRAVEL
TLENGTH
L
LOADCAPACITY
kgfNO.
HOLESSPACING
U W
BASE MOUNTING HOLES(COUNTERBORED)
Dimensions in mm
NO.HOLES
SPACINGM
CARRIAGEMOUNTING HOLES
(THREADED)
moment load ratings + load / life formulas. pg.96
74
Specifications:
Straight Line Accuracy0.0025mm/25mm of travel
FinishCarriage: Gold anodize, Base: Black anodize
Positional Repeatability0.0025mm
Coefficient of Friction0.003 typical
ConstructionAluminum carriage and base, hardenedsteel crossed roller rail sets.
OrderingOrder standard positioning tables fromtable by model number according toload and travel required.
Delivery stock to 6 weeks.
NBT-1000AM
NBT-2000AM
NBT-3000AM
NBT-4000AM
NBT-6000AM
15
21
28
35
45
30
40
60
80
100
4.1
6.5
9
10.5
13
Dimensions in mm
SERIES
HEIGHTA
±0.13
WIDTHB
±0.25
BASETHICKNESS
C
Profile Dimensions
T2 L
CA
B
NBT-1000AM
NBT-2000AM
NBT-3000AM
NBT-4000AM
NBT-6000AM
17.5
17.5
27.5
42.5
55
10
15
25
40
50
M3
M4
M5
M5
M6
4.5
8
10.5
13
16
5
5
10
10
10
22
30
40
55
60
6.1
8.1
10.1
10.1
11.0
3.5
4.6
5.8
5.8
7.1
SERIES N P J K R S D dSPACING THREAD DEPTH SPACING COUNTERBORE
CARRIAGE BASE
Dimensions in mm
Mounting Dimensions
CARRIAGE MOUNTING DIMENSIONS
K
P
J
N M
BASE MOUNTING DIMENSIONS
S
D
W
d
UR
75
6 Reasons to chooseDel-Tron Anti-CreepCrossedRoller Slide Tables(Aluminum)
1. Anti-Creep Crossed Roller Technology.Ideal for vertical and cantilevered loadapplications.
2. High accuracy and load capacity.Precision V grooved rails and rollers.
3. Lightweight aluminum carriage and basedesign.
4. Withstands force in any direction.Alternately crossed roller cage design.
5. Easy installation. Threaded andcounterbored mounting holes in standard pattern.
6. Interchangeable with other manufacturer'sslides.
Del-TronAnti-Creep CrossedRoller Slide TablesThe Anti-Creep crossed roller slidetables utilize our Anti-Creep crossedroller rail systems to prevent rollercage slippage during operation. Thissystem allows you to mount the table inany orientation while maintaining directroller contact to the rail surfaceeliminating roller cage creep. Thesetables are ideal for vertical applicationsand where high acceleration anddeceleration forces are present.
Factory assembled and ready to install,each positioning table consists of analuminum base and an aluminumcarriage, both precision milled, and a pairof hardened steel linear bearings.Counterbored clearance holes, in base,permit easy mounting.Threaded holes,closely spaced in carriage, permitattaching your components withoutadditional machining. Factory preloadedbearings eliminate side play. Internalstops, in the form of projecting screwheads between the underside of thecarriage and base, protect bearings fromover travel during handling.
Mount on flat surfaces to provide fullsupport to the base. Loads stated, maybe applied in any direction. Load valuesare calculated for weights evenlydistributed on your positioning table. Forfull life of tables, we recommend carefulcalculation of moments and cantileveredloads.
Anti-Creep Crossed RollerSlide Tables (Aluminum)
®
®
76
Anti-Creep CrossedRoller Slide Tables(Aluminum)
NBT-1050AM-ACNBT-1065AM-ACNBT-1080AM-ACNBT-1095AM-ACNBT-1125AM-AC
NBT-2035AM-18-ACNBT-2050AM-ACNBT-2065AM-ACNBT-2080AM-ACNBT-2095AM-ACNBT-2110AM-70-ACNBT-2125AM-ACNBT-2155AM-100-ACNBT-2185AM-120-AC
NBT-3055AM-ACNBT-3080AM-45-ACNBT-3105AM-ACNBT-3130AM-75-ACNBT-3155AM-ACNBT-3180AM-ACNBT-3205AM-ACNBT-3230AM-155-AC
NBT-4085AM-ACNBT-4125AM-ACNBT-4165AM-ACNBT-4205AM-ACNBT-4245AM-AC
NBT-6110AM-ACNBT-6160AM-ACNBT-6260AM-ACNBT-6360AM-AC
2530405070
1825304050657090
100
2548608390
103113150
6075
105130143
6385
158230
50658095
125
3550658095
110125155185
5580
105130155180205230
85125165205245
110160260360
4351657389
30445266748590
144174
88100154170217248262290
196273329395462
280483728924
44888
444888888
44444488
44444
4448
40557085
115
2540557085
100115145175
356085
110135160185210
65105145185225
90140240340
——405585
———40557085
115145
——————85
110
—————
———
140
468
1014
2468
1012141822
2468
10121416
2468
10
248
12
1515151515
151515151515151515
2525252525252525
4040404040
50505050
MODELTRAVEL*
T LENGTH
L
LOADCAPACITYLBF (kgf)
NO.HOLES
SPACINGU W
BASE MOUNTING HOLES(COUNTERBORED)
NO.HOLES
SPACINGM
CARRIAGEMOUNTING HOLES
(THREADED)
*Travel is 1/2 distance from center in either direction.moment load ratings + load / life formulas. pg. 97
Stainless Steel Models AvailableFor applications where par ticulate contamination caused by corrosion must be reduced, Del-Tron offers Gold Motion crossed rollerpositioning tables equipped with corrosion-resistant, stainless steel, crossed roller linear bearings.
TO ORDER:Add SS to model number before “AM”. For example: NBT-4085SSAM-AC
77
Specifications:
Straight Line Accuracy0.0025mm/25mm of travel
Positional Repeatability0.0025mm
Coefficient of Friction0.003 typical
ConstructionAluminum carriage and base,hardened steel crossed roller railsets.
FinishCarriage: Gold anodize, Base:Black anodize
OrderingOrder standard slide tables fromtable by model number accordingto load and travel required.
Delivery stock to 6 weeks.
NBT-1000AM-AC
NBT-2000AM-AC
NBT-3000AM-AC
NBT-4000AM-AC
NBT-6000AM-AC
15
21
28
35
45
30
40
60
80
100
4.1
6.5
9
10.5
13
Dimensions in mm
SERIES
HEIGHTA
±0.13
WIDTHB
±0.25
BASETHICKNESS
C
Profile Dimensions
T2 L
CA
B
NBT-1000AM-AC
NBT-2000AM-AC
NBT-3000AM-AC
NBT-4000AM-AC
NBT-6000AM-AC
17.5
17.5
27.5
42.5
55
10
15
25
40
50
M-3
M-4
M-5
M-5
M-6
4.5
8
10.5
13
16
5
5
10
10
10
22
30
40
55
60
5
6.1
8.3
8.3
10.3
3.1
3.7
5
5
6.7
3.2
3.7
5.2
5.2
8.0
SERIES N P J K R S D d hSPACING THREAD DEPTH SPACING COUNTERBORE
CARRIAGE BASE
Dimensions in mm
Mounting Dimensions
CARRIAGE MOUNTING DIMENSIONS
K
P
J
N M
BASE MOUNTING DIMENSIONS
S
D
W
d
UR
h
78
6 Reasons to chooseDel-Tron® Crossed RollerSlide Tables(Steel)
1. High Accuracy - .002mm parallelism.
2. High Load Capacity - Crossed roller wayconstruction handles loads up to 1200 kg.
3. Interchangeable with other manufacturer’stables.
4. Low Friction - 0.003 coefficient of frictionfor smooth operation.
5. Standard Mounting - Holes provided.
6. Backlash Free - Factory preloaded forminimum axial play.
Del-Tron®
Crossed Roller Slide Tables
Crossed Roller Slide Tables are factory assembled, and ready to install. They useDel-Tron crossed roller bearings to provide veryprecise linear motion with low friction and highsupport stiffness for the load. A selection ofmore than 40 standard sizes is available forapplications including precision instruments,office and communications equipment, surfacegrinders, tool grinders, assembly fixtures, andanywhere precise linear positioning is required.
ConstructionEach positioning table consists of a one piecebase, a one piece carriage, and a pair of linearbearings. The bearings are factory preloaded toeliminate side play.
Counterbored clearance holes in the base permit easy mounting in your structure.Threaded holes in the carriage are closelyspaced to permit attaching your componentswithout additional machining in most cases.
Standard material for base and carriage is coldrolled steel, with black oxide finish.
ApplicationMount on a flat surface to provide full support tothe base.
Although it is seldom needed, the carriage surface can be machined or additional mountingholes can be added if the following precautionsare observed:
1. Do not disassemble the table since reassembly and readjustment of the preloading require special procedures.
2. Protect the ways against entry of chips anddebris.
3. Drill only blind holes through the carriage toavoid depositing chips inside the unit.
4. Avoid intersection with internal mounting orpreloading screws.
5. Avoid clamping forces in excess of the ratedload capacity.
Internal stops, in the form of projecting screwheads between the under side of the carriageand the base, are intended only to protect thebearings from overtravel during handling.Provide separate stops appropriate for your loadif needed.
The ends of the carriage contain tapped holesthat permit easy attachment of way covers, bellows, or other shields to exclude dust andkeep the ways clean.
Crossed Roller Slide Tables(Steel)
79
Crossed RollerSlide Tables(Steel)
NBT-1025NBT-1035NBT-1045NBT-1055NBT-1065NBT-1075NBT-1085
NBT-2035NBT-2050NBT-2065NBT-2080NBT-2095NBT-2110NBT-2125NBT-2140NBT-2155NBT-2170NBT-2185
NBT-3055NBT-3080NBT-3105NBT-3130NBT-3155NBT-3180NBT-3205NBT-3230NBT-3255NBT-3280NBT-3305
NBT-4085NBT-4125NBT-4165NBT-4205NBT-4245NBT-4285NBT-4325
NBT-6110NBT-6160NBT-6210NBT-6260NBT-6310
12182532404550
1830405060708090
100110120
3045607590
105130155180205230
5075
105130155185210
6095
130165200
25354555657585
3550658095
110125140155170185
5580
105130155180205230255280305
85125165205245285325
110160210260310
12162026323640
40637595
105120130145155170180
126184220275310355375420450490520
280390470565660745830
400690870
10401200
4448888
4448888
12121216
444466
1010101212
44466
1010
44666
18283848586878
2540557085
100115130145160175
356085
110135159185210235260285
65105145185225265305
90140190240290
———————
———————————
————85
110135160185210235
———
105145185225
——90
140190
———28384858
———40557085
100115130145
——————85
110135160185
—————
105145
—————
———————
———————————
—————————
110135
———————
—————
———————
———————7085
100115
———————————
———————
—————
2468
101214
2468
10121416182022
2468
10121416182022
2468
101214
2468
10
—1 × 102 × 103 × 104 × 105 × 106 × 10
—1 × 152 × 153 × 154 × 155 × 156 × 157 × 158 × 159 × 15
10 × 15
—1 × 252 × 253 × 254 × 255 × 256 × 257 × 258 × 259 × 25
10 × 25
—1 × 402 × 403 × 404 × 405 × 406 × 40
—1 × 502 × 503 × 504 × 50
Length, Travel and Load Selection
MODELTRAVEL
TLENGTH
L
LOADCAPACITY
kgfNO.
HOLES U V W X YNO.
HOLESSPACING
M
CARRIAGEMOUNTING HOLES
(THREADED)BASE MOUNTING HOLES(COUNTERBORED) SPACING
T2 L
O
Dimensions in mm
moment load ratings + load / life formulas. pg.97
80
Crossed Roller Slide Tables (Steel)
Load RatingsSee “Ratings and Specifications” page 54
The load capacities stated in the tablesmay be applied in any direction, and areassumed to be centered and evenlydistributed over the table. Calculatemoments and cantilevered loads carefullysince inadvertent overloading will reduceservice life.
OrderingOrder standard positioning tables fromtable by model number according to loadand travel required.
Delivery stock to 6 weeks.
NBT-1000NBT-2000NBT-3000NBT-4000NBT-6000
12.517.527.542.555
1015254050
M2M3M4M5M6
78
10.51316
3.55
101010
2230405560
4.56.58.0
10.011.5
2.53.54.55.57
Mounting Dimensions
SERIES N P J K R S D d
SPACING THREAD DEPTH SPACING C’BORECARRIAGE BASE
Dimensions in mm
CARRIAGE MOUNTING DIMENSIONS
BASE MOUNTING DIMENSIONS
V
H
B
G
F
E
O
C
A
H
K
P
J
N M
S
D
W
d
UR
Y
VX
NBT-1000NBT-2000NBT-3000NBT-4000NBT-6000
1721283545
30406080
100
5.56.59
10.513
2.53.45.56.58
————15
1216405560
————92
M2M2M3M3M4
Dimensions in mm
Profile Dimensions
SERIES * HEIGHTA
± 0.1
WIDTHB**
± 0.1
FLANGEHEIGHT
O C E F G H
DUST COVER ATTACHMENTHOLES
THREAD
* Series NBT-1000 Tables use series NB-1 bearings etc. ** Except Series NBT-1000 and NBT-2000 +0.2mm
–0.4mm
NBT 1025NBT 1035NBT 1045NBT 1055NBT 1065NBT 1075NBT 1085
NBT 2035NBT 2050NBT 2065NBT 2080NBT 2095NBT 2110NBT 2125
2222222
2222233
4445555
4455566
NBT 2140NBT 2155NBT 2170NBT 2185
NBT 3055NBT 3080NBT 3105NBT 3130NBT 3155NBT 3180NBT 3205NBT 3230NBT 3255NBT 3280
3333
2233333333
6677
5566677777
NBT 3305
NBT 4085NBT 4125NBT 4165NBT 4205NBT 4245NBT 4285NBT 4325
NBT 6110NBT 6160NBT 6210NBT 6260NBT 6310
3
2333334
33333
7
5677778
66777
MODEL MODEL MODELDeflection Deflection Deflection
V H V H V H
Dimensions in μm
AccuracyTop and bottom mounting surfaces andcarriage side surfaces are ground flat and parallelto the line of motion. Accuracy of movement (V) ismeasured as a deflection over the center line ofthe carriage as shown. Accuracies, measuredwithout load, depend primarily on overall length aslisted.
Deflections (H), measured at either side of thecarriage under the same conditions.
81
Del-Tron®
RecirculatingBall Slide Guides(BSG)
The BSG type consists of a block and aguide rail, both having two R-shape raceway grooves machined by precisiongrinding. The block consists of a mainbody having raceway grooves and a resinreturn cap ensuring smooth circulation ofballs. These precision steel balls roll in therespective raceway groove with contact atfour points.
• Smooth and Stable operation. Since precision steel balls are used as rolling elements, the rolling resistance is extremely small, ensuring smooth and stable operation.
• Compact, lightweight, and low price. Theblock is a simple structure, so the slideguide is compact and inexpensive. Its compactness and light weight also makethis product optimum for linear operation athigh speed.
• High load capacity utilizing the R-shapedgroove. The raceway surface over whichthe balls roll is an R-shaped groove, offering a large contact area. Therefore, theproduct features a large load capacity anda long effective life.
• Four-point contact to carry load andmoment in all directions. The Gothic archgroove, where the balls contact the raceway surface at four points, enables theload and moment to be carried in all directions.
• Stainless steel type (BSGS) is available.The BSGS type uses stainless steel for theblock and guide rail, thus having superior corrosion resistance.
• Extra wide type (BSGW) is also available.With its increased number of rolling elements and increased width, this unit canreplace the use of two linear guides.Stiffness in regard to moment load isincreased, thus creating an effective compact linear motion mechanism.
• Slide guides are supplied with temporaryends stops. They are not to be used as positive stops.
6 Reasons to chooseDel-Tron® RecirculatingBall Slide Guides(BSG)
1. Smooth and stable operation.
2. Compact, lightweight and low price.
3. High load capacity due to R-shapedgroove.
4. Four-point contact to carry load andmoment in all directions.
5. Stainless steel type available.
6. Extra wide type available.
Recirculating Ball Slide Guides (BSG)
82
NomenclaturePart number for BSG
BSG S 5 UU 2
Type
S Stainless Steel
Height of guide
Rail/ guidewidth
None Without sealUU Seals on both sides
W
Seal
Material
C
A
H
D
B
Ref
eren
ceP
lane
s
W1
BSG Type
Marking
AccuracyHeight (H) toleranceDifference of heights (H) between paired onesWidth (W1) toleranceDifference of widths (W1) between paired ones
Running parallelism of C plane with respect to A planeRunning parallelism of D plane with respect to B plane
160 N
Number of carriages per rail
Length of guide rail (mm)
Rail mounting hole
Nominal No.Height of shoulder ofcarriage section h1
Height of shoulder of rail section h2
BSGS5BSGS8BSGS9W • BSG10BSGS12WBSG13 BSGS14WBSG16 BSGS16WBSG25
22.5334455
8.5
11
1.52.52
2.53.52.54
The corners of the reference planes should be finished with undercuts as shown in Figure 3. Therecommended heights of the shoulders of the mounting planes are as shown in the table. To attainhigh accuracy, it is recommended to finish the mounting planes of the bed and table to an accuracythe same as or better than that of the guide rail and block.
MountingRequirements
Recommended Tightening Torques: Therecommended tightening torques for the mountingbolts (hex socket head bolts) are shown here.
Nominal Bolt Size Tightening Torques
M2
M3
M4
M5
0.4
1.0
2.5
4.9
Fixing Method
To install a BSG Slide Guide (Fig. 4), confirm the reference planes as shown in Figure 1, then let thereference planes of the bed and table make close contact with the reference planes of the object andfix them. When using two guide rails, fix the reference side in a state in which it is closely contactedwith the reference plane. Fix the adjustment side after adjusting the traveling state with either the guiderails or the block in a free state.
Unit: mm
Unit: mm
Unit: N⋅m
TravelAccuracy
Fig. 2
h 1
h2
Fig. 3
Fig. 4
Fig. 1
None CounterboreN Threaded hole
BSGS5 Only
±0.0410.015
±0.041
0.020See Fig. 2
See Fig. 2
None STD WidthW Extra Width
83
LM x P
P
LM x P
P
Lmm
BSG10BSG10UU
BSG13BSG13UU
BSG16BSG16UU
BSG25BSG25UU
BSGS5BSGS5UU
BSGS8BSGS8UU
BSGS10BSGS10UU
BSGS13BSGS13UU
BSGS16BSGS16UU
BSGS25BSGS25UU
MODEL
55160
55130
75195
170370
230670
280880
70
70
95275
220470
310
340
100
85
115
270
430
460
[M] Lmm [M] Lmm [M] Lmm [M]
GUIDE RAIL LENGTHS / [NUMBER OF HOLES]
MODEL
BSG12WBSG12WUU
BSG14WBSG14WUU
BSG16WBSG16WUU
BSGS9WBSGS9WUU
BSGS12WBSGS12WUU
BSGS14WBSGS14WUU
BSGS16WBSGS16WUU
80200
80200
110310
150550
110230
110230
150390
230670
140260
140260
190470
310
Lmm [M] Lmm [M] Lmm [M] Lmm [M]
GUIDE RAIL LENGTHS / [NUMBER OF HOLES]
See page 84 for Carriage information.
See page 85 for Carriage information.
BBaallll SSlliiddee GGuuiiddeeBSGBSGS (Stainless Steel)
BBaallll SSlliiddee GGuuiiddeeEExxttrraa WWiiddeeBSG-W BSGS-W (Stainless Steel)
15
15
20
25
40
60
30
30
40
40
P
P
MAX LENGTH
STEEL STAINLESS
N/A
N/A
500
500
1900
1900
340
700
1000
1000
1000
1000
MAX LENGTH
STEEL STAINLESS
40130
40100
55155
120320
150550
220640
Maximum lengthis available for special order.
Maximum lengthis available for special order.
Dimension - mm
[2][8]
[2][6]
[2][7]
[4][12]
[3][13]
[3][10]
[3][10]
[3][8]
[3][9]
[6][14]
[5][16]
[4][14]
[4]
[4]
[4][13]
[8][18]
[7]
[5]
[6]
[5]
[5]
[10]
[10]
[7]
[2][6]
[2][6]
[2][7]
[3][13]
[3][7]
[3][7]
[3][9]
[5][16]
[4][8]
[4][8]
[4][11]
[7]
170290
170290
230
430
[5][9]
[5][9]
[5]
[10]
N/A
1000
1900
1900
700
1000
1000
1000
84
BSGS5BSGS5UU
BSGS8BSGS8UU
BSGS10BSGS10UU
BSGS13BSGS13UU
BSGS16BSGS16UU
BSGS25BSGS25UU
BBaallll SSlliiddeeGGuuiiddeeBSGBSGS(Stainless Steel)
MODEL DIMENSIONS OF CARRIAGE
BSG10BSG10UU
BSG13BSG13UU
BSG16BSG16UU
BSG25BSG25UU
STEEL STAINLESSSTEEL
STEEL STAINLESSSTEEL
H
6
8
10
13
16
]25
B
12
17
20
27
32
46
L2
17
23.5
30.5
34
42.5
62
L1
15.6
21.9
28.1
30
38.5
55.7
W
2
2.5
2.5
3.5
3.5
4
P1
8
12
15
20
25
38
S1
M2
M2
M3
M3
M3
M4
l 1
1.5
2.5
3
3.5
4
6
L3
9.8
15.1
20.4
23
29.5
45.7
b
4.5
6.5
7.8
10
12
17.5
P2
—
8
10
15
20
38
BASIC LOADRATING
C kgf
44
110
170
220
370
701
Co kgf
73
170
250
320
550
1001
H1
4
4.7
5.5
7.2
9.5
15
C
5
7
9
12
15
20
DIMENSIONS OF GUIDE RAIL
BSG10BSG10UU
BSG13BSG13UU
BSG16BSG16UU
BSG25BSG25UU
BSGS5BSGS5UU
BSGS8BSGS8UU
BSGS10BSGS10UU
BSGS13BSGS13UU
BSGS16BSGS16UU
BSGS25BSGS25UU
B1
2.5
3.5
4.5
6
7.5
10
W1
3.5
5
5.5
7.5
8.5
13
d x G x h
2.4x 3.5 x 1
2.4 x 4.2 x 2.3
3.5 x 6 x 3.5
3.5 x 6 x 4.5
3.5 x 6 x 4.5
6 x 9.5 x 8.5
N
5
5
7.5
10
15
20
S3N Type
M2.6
—
—
—
—
—
WEIGHT
Carriagekg
.003
0.01
0.02
0.04
0.06
0.23
Guide Railkg/m
.43
0.19
0.31
0.61
1.02
2.15
MODEL
M 1
BP1W
H
B1
CW1
bM 3
4 – S1
2 For BSGS5
M 2
L1
L3
P2
G
H1
d
N
h
N
BSG/BSGS
4 – S 1 B
WP1
W1C
L 2
L1
P2
B1
H
BSG-UU/BSGS-UU (with double seals)
NOTE: Models BSGS5, BSGS8, BSGS5UU and BSGS8UU are available in Stainless Steel only.
N
S3
M x P
2 FOR BSGS5
BSGS5 ONLY
Dims - in(mm)
Part # BSGS5 - Mtg ScrewSpecial Base MountingFastener Supplied withBSGS5 Series
Dimensions in mm
Dimensions in mm
2.87Dia
5.9
.66
M2 x 0.4Threadmm
moment load ratings + load / life formulas. pg.98
85
BBaallll SSlliiddee GGuuiiddeeEExxttrraa WWiiddeeBSG-WBSGS-W (Stainless Steel)
MODEL DIMENSIONS OF CARRIAGE
BSG12WBSG12WUU
BSG14WBSG14WUU
BSG16WBSG16WUU
BSGS9WBSGS9WUU
BSGS12WBSGS12WUU
BSGS14WBSGS14WUU
BSGS16WBSGS16WUU
H
9
12
14
16
B
25
30
40
60
L2
31.5
39
44.5
55.5
L1
30.1
35.3
40.7
51.2
W
3.5
4.5
6
7.5
P1
18
21
28
45
l 1
2.5
3
3
4.5
L3
22.1
28.4
33.5
42
b
7
9
11
13
P2
12
12
15
20
W2
12.5
—
—
—
S2
M4
—
—
—
l 2
3.5
—
—
—
BASIC LOADRATING
C kgf
160
230
300
500
Co kgf
250
340
440
720
MODEL
BSG12WBSG12WUU
BSG14WBSG14WUU
BSG16WBSG16WUU
BSGS9WBSGS9WUU
BSGS12WBSGS12WUU
BSGS14WBSGS14WUU
BSGS16WBSGS16WUU
H1
5.2
7.5
8
9.5
C
14
18
24
42
B1
7
9
12
9.5
W1
5.5
6
8
9
DIMENSIONS OF GUIDE RAIL
d x G x h
3.5 x 6 x 3.2
3.5 x 6 x 4.5
4.5 x 8 x 4.5
4.5 x 8 x 4.5
N
10
10
15
15
WEIGHT
Carriagekg
0.02
0.04
0.08
0.15
0.5
0.96
1.4
2.96
B2
—
—
—
23
S1
M2.6
M2.6
M3
M4
Dimensions in mm
Dimensions in mm
Guide Railkg/m
L 2
L1
P24 – S 1
BP1
W
b H
B1
W1 C
BSG-WUU/BSGS-WUU(with double seals)
For BSG16W/BSGS16W Guide Rails
B
W
W1
H
4 – S 1
C
P1B
W
B1
H
4 – S
M 3
1
C
P1 W2
b
B1
2 – S 2
M 1
M 2
h
L1
G
H1b
W1
L3
P2
N
d
N
BSG12W ~ 16WBSGS12W ~ 16W BSGS9W
NOTE: Models BSGS9W and BSGS9WUU are available in Stainless Steel only.
B1
H1
G
dB 2
C
STEEL STAINLESSSTEEL
STEEL STAINLESSSTEEL
moment load ratings + load / life formulas. pg.98
86
Technical Section Index
General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 83Life Formulas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 85 Moment Load Formulas & Ratings . . . . . . . . . . . . . . . . . . . . . . . . page 87
General Information
1. Ball Slides or Roller Slides
A. Ball slide design offers the following advantages:
• Self cleaning (point contact of balls and shafts does notallow foreign material to interfere.
• Low cost (Ball and shaft materials are common and easilymanufactured).
B. Crossed roller slide design offers the following advantages:
• Line contact of roller to shafts offer 8 x 10 times the loadcapacity of balls.
• Higher over hanging load capacity and low axial play.
Ball Slide Crossed Roller
2. Straight Line Design or Recirculating Type
Straight line, or non-recirculating slides, have rolling elements which move on a straight track and are separated by a retainer.The slide reaches the end of its travel when the retainer or rolling element contacts a limiting component, (either a screw head orend cap). This travel limitation is determined by the relationship of the retainer length to the carriage length. Standard slidesusually have travel equal to 1/3 the carriage length. Maximum total travel can be as much a 1x the carriage length. Therefore,for more travel, you must specify a longer slide. This design offers extremely low friction and stiction characteristics.
Recirculating slide designs offer travel which is not limited by carriage size. In this design the rolling elements revolve within anoval track inside the carriage. See the Del-Tron® BSG series.
Travel ends when ball or rollerretainer contacts the end cap.
Balls recirculate around an oval track. Travel is limited bythe length of the base rail.
Straight Line Type Recirculating Type
3. Standard Tolerances
Ball Slide Crossed Roller
Unless otherwise specified,tolerances are as follows:
One (1) place decimals ±0.25
Two (2) place decimals ±0.13
Dimensions in Millimeters
87
4. Custom Slides
Del-Tron’s engineering staff will be pleased to assist you in developing custom versions of our linear slides. Ourproprietary manufacturing processes allow us to offer completely customized slides built to your requirements even insmall quantities in less than eight weeks.
Minor modifications can be provided. Some of the more common modifications we can provide:
• Changes in height, width, or length
• More or less travel
• Increased load capacity
• Light, medium, or heavy preload
• Different holes, threads or hole locations
• Dowel holes and pins
5. High Temperature ApplicationsDel-Tron slides can be modified to operate in elevated temperature areas by the substitution of teflon, aluminum, or brassretainers.
6. Static Sensitive ApplicationsDel-Tron now offers precision linear motion devices that meet low electrostatic discharge requirements common in the semiconductor and electronics industries. The new slides are coated with electroless nickel, an alloy of nickel and phosphorous produced by autocatalytic chemical reduction with hypophosphite. The plating allows static charges to dissipate, helping theslides to meet requirements for automated equipment. Del-Tron® “ESD” electroless nickel plated slides are plated to ASTMstandard B 733-97. This process is available for Del-Tron® line of ball slides, crossed roller slides and both ball and crossed rollermulti-axis positioning stages.
7. Vacuum Applications
Outgassing of slide components can be reduced or eliminated for vacuum applications by eliminating anodized and oxidedfinishes, labels, lubricants, and non-metallic retainers.
Many of our slides allow the preload to be set to a specific amount to accommodate the needs of the application. A light,medium, or heavy preload may be ordered. The amount of preload can expressed as grams of force needed to move either thebase or carriage. Please contact our engineering staff to discuss your special preload requirements.
8. Preload vs. Axial Play
Slide preload and axial play are related.
• Increased preload = less axial play
• Decreased preload = more axial play
AXIAL PLAY
PRELOAD
9. Straight Line Accuracy
Straight Line Accuracy = possible runout in any plane
Measured by comparison of the line of travel to a master straight edge, using a gage or indicator mounted on the slides.
H = Horizontal DisplacementV = Vertical Displacement
V
HV
H
• Reduced or increased axial play
• Multiple carriages on a single base
• Non-standard retainer material
• No anodize or non-standard anodize color
• Corrosion resistant stainless steel components
88
LifeFormulas
Linear Ball and Roller Slides
Rated Life
The rated life “L” of a linear slide is thelength of travel endured by the slideunder a specified condition. Since inreality, life varies from one slide toanother, industry normally uses the L10life rating which is defined as the lengthof travel that 90% of apparently identicalslides will complete before the firstevidence of failure.
Speed Factor
The effect of speed on the load rating ofa slide can be accounted for by aspeed factor:
where: V = speed of the slide movement in mm/min (when the speed varies during the cycle, the peak value should be used)
m = 3 for ball slides, orm = 10/3 for roller slides
Note: When the speed is less than760mm/min, fs = 1.
Temperature Factor
When the temperature of the slideexceeds certain limits, it reduces thehardness of contacting elements andconsequently affects the load rating ofthe slide. Therefore, its load rating shallbe adjusted by a temperature factor “ft”.The values of this factor are presentedin Table 1.
Table 1
Note: When specifying slides forelevated temperature service, it shouldbe kept in mind that the delrin retainersfound in many slides are notrecommended for temperatures above82 deg. C.
Load Type Factor
In reality, the load endured by a slidecan never be absolutely smooth, butrather is a sum of variable forces thatinclude working load, inertial forces,vibrations, impacts, occasional loads,etc. In order to have their influencetaken into account, the load rating of theslide shall be adjusted by a load typefactor “fw”.
The values of “fw” for calculations performula (2) and (3) are presented inTable 2.
Table 2
Condition of Load Value of “fw”
Relatively smooth motion 1 to 1.5Motion with impacts 2 to 3
m 760fs= V
Formula 1
Temp.DegreeCelsius
Temp. Factor, “ft”
Regular BearingSteel Contacting
Elements
StainlessSteel Contacting
Elements
104149204260
10.9
0.75not recommended
11
0.90.75
89
Life Formula for Ball and RollerSlides
Based on the above definitions and role ofdifferent factors, the real life of linearslides can be obtained from the followingformula:
Formula 2
where:L10 = life of the slide at 90% of reliability as
defined above (in millimeters).C= catalog “load capacity” of the slide in
kg. (which is a load that corresponds to an L10 life of 250 million mm, provided the factors fs, ft and fw are equal to 1.
Pc= calculated effective load the slide is subjected to in kg. (fs, ft and fw are factors as described above.)
m= 3 for ball slides, or 10/3 for roller slides.
When other than 90% reliability is required(for instance, “K”% reliability), the knownvalue of L10 shall be multiplied by areliability factor “fr” so that:
Ln = fr × L10where:Ln = rated life at the reliability of K%
(n = 100-K).The values of the factor “fr” are presented inTable 3.
Table 3RELIABILITY “Ln” rated life “fr”, reliability
K% factor
50 L50 5.0090 L10 1.0095 L5 0.6297 L3 0.4499 L1 0.21
The general formula for the life of Del-Tron linear slides is expressed asfollowing:Example
Formula 3
Design considerations lead to theselection of a ball slide. The availablespace accommodates the Del-Tron SA2-4slide. Find the life at 95% reliability (L5life) under the following conditions:
•Peak speed during the cycle:V=3810 mm/min
•Working temperature of slide = 66 deg. C.
•Calculated effective load the slide issubjected to: Pc = 9.1 kg
•Type of load: Moderatevibration, no impacts.
Solution:
(1) With the formula (1) the speed factor “fs”is found as:
3 760fs= 3810 = 0.58
(2) The value of the temperature factor “ft” is found in Table 1 as: ft = 1.
(3) Using Table 2, the value of the type of load factor can be estimated as: fw = 1.25.
(4) The value of reliability factor “fr” is foundin Table 3 as: fr = 0.62.
(5) The value of the load capacity for the Del-Tron SA2-4 slide is found in the Del-Tron Catalog as: C = 27.2 kg
(6) The required life of the slide can then be calculated using formula (3):
L5=0.62 x x 25.4 x 106 =42 x 106 mm27.2 x .58 x 19.1 x 1.25
3( ) ( )
(L10= x (25.4 x 106 mm)C x fs x ftPc x fw
m)
(Ln=fr x x (25.4 x 106 mm)C x fs x ftPc x fw
m)
90
Moment LoadRatings
M 1
M 2
M 3
X Y
Z
A = Distance (mm) from slide centerline to lineof acting force.
F = Acting force (kg).L = Published load capacity (kg).M1, M2, M3 = Moment load rating (kg - mm).m1 - m2 - m3 = Acting moment load (kg - mm).
Unit Conversion:(N⋅m) x (102) = kg - mm
A
M 1
2
Y F
F
A
M 2
F
A
A
M 3
M 2
F
F
m1= [F x A]
F m1L M1
+ <1
m3= [F x A]
F m3L M3
+ <1
m2= [F x A]
F m2L M2
+ <1
[ ] [ ]
[ ]
Need motor/controller for your Posi-Drive?Call us. We can supplythe complete package.
91
Moment Load Ratings
CA-.5CA-1CA-2CA-3
DA-1DA-2DA-3DA-4DA-5DA-6
EA-1EA-2EA-3EA-4EA-5EA-6
MA-1MA-2MA-2.5MA-3MA-4
NA-1NA-2NA-3NA-4NA-6NA-8NA-10
SA1-1SA1-2SA1-3SA1-3.5SA1-4SA1-6SA1-8
SA2-1SA2-1.5SA2-2SA2-3SA2-4SA2-6SA2-8
SA3-1SA3-1.5SA3-2SA3-3SA3-4SA3-5SA3-6SA3-9SA3-12
C-1ACC-2ACC-3AC
D-1ACD-2ACD-3ACD-4ACD-5ACD-6AC
E-1ACE-2ACE-3ACE-4ACE-5ACE-6AC
M-1ACM-2ACM-2.5ACM-3ACM-4AC
N-1ACN-2ACN-3ACN-4ACN-6ACN-8ACN-10AC
S1-1ACS1-2ACS1-3ACS1-3.5ACS1-4ACS1-6ACS1-8AC
S2-1ACS2-1.5ACS2-2ACS2-3ACS2-4ACS2-6ACS2-8AC
S3-1ACS3-1.5ACS3-2ACS3-3ACS3-4ACS3-5ACS3-6ACS3-9ACS3-12AC
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
Ball Slide Assemblies and Anti-Creep Ball Slide AssembliesRefer to Page 7 and 10
.01
.01
.01
.01
.06
.14
.17
.20
.23
.26
.18
.22
.26
.31
.35
.39
.28
.34
.37
.42
.51
.43
.52
.58
.72
.371.011.16
.63
.831.041.251.461.882.29
.961.442.022.502.883.604.32
2.472.885.117.259.72
11.1212.3515.2416.89
.01
.02
.04
.05
.11
.51
.981.522.022.60
.22
.54
.981.522.022.60
.38
.981.171.492.27
.511.222.033.115.087.51
10.39
.681.362.263.735.549.15
13.67
.902.033.324.709.49
15.2522.37
1.901.906.86
12.5320.5332.0340.3461.4581.07
.02
.03
.04
.06
.11
.531.021.592.132.73
.23
.571.021.592.132.73
.401.021.231.572.39
.531.282.143.265.347.89
10.91
.711.422.373.915.819.61
14.35
.952.143.494.949.97
16.0223.49
1.991.997.21
13.1521.5633.6342.3564.5385.12
.124
.124
.124
.511.221.531.792.042.30
1.551.942.332.723.103.49
2.503.003.253.754.50
3.854.625.136.417.708.98
10.26
5.567.389.23
11.0712.9216.6120.30
8.5112.7617.8622.1125.5231.8938.27
21.8725.5245.2064.1586.0298.42
109.35134.87149.45
.216
.324
.486
.964.488.64
13.4417.9223.04
1.924.808.64
13.4417.9223.04
3.338.64
10.4013.2020.16
4.5010.8018.0027.5045.0066.5092.00
6.0012.0020.0033.0049.0081.00
121.00
8.0018.0029.4041.6084.00
135.00198.00
16.8016.8060.76
110.88181.72283.50357.00543.90717.50
.227
.340
.510
1.014.709.07
14.1118.8124.19
2.015.049.07
14.1118.8124.19
3.509.07
10.9213.8621.17
4.7311.3418.9028.8847.2569.8396.60
6.3012.6021.0034.6551.4585.05
127.05
8.4018.9030.8743.6888.20
141.75207.90
17.6417.6463.80
116.42190.81297.68374.85571.10753.38
92
Moment Load Ratings
Crossed Roller Slide AssembliesRefer to Page 16
5.506.297.348.76
12.8415.0117.20
6.347.218.468.46
14.8018.0221.62
18.5321.5428.7235.9135.9138.9257.4560.9564.17
MODEL M1 M2 M3#
MODEL M1 M2 M3#
.852.795.177.97
10.6313.67
1.373.997.36
11.1613.8116.40
2.776.667.408.61
11.96
3.558.77
18.2328.7050.7267.0687.31
RDA-1RDA-2RDA-3RDA-4RDA-5RDA-6
REA-1REA-2REA-3REA-4REA-5REA-6
RMA-1RMA-2RMA-2.5RMA-3RMA-4
RNA-1RNA-2RNA-3RNA-4RNA-6RNA-8RNA-10
0.430.710.951.011.151.30
1.051.532.062.152.282.37
1.982.202.202.332.54
3.183.835.686.968.268.629.27
0.812.664.927.59
10.1213.02
1.303.807.05
10.6313.1615.62
2.636.357.058.20
11.39
3.718.35
17.3627.3348.3063.8683.16
7.0210.0316.3727.4049.1176.87
107.66
7.0210.6814.0316.2949.1180.05
117.45
14.9518.7937.5862.6478.30
117.72175.39258.10323.46
RSA1-1RSA1-2RSA1-3RSA1-3.5RSA1-4RSA1-6RSA1-8
RSA2-1RSA2-1.5RSA2-2RSA2-3RSA2-4RSA2-6RSA2-8
RSA3-1RSA3-1.5RSA3-2RSA3-3RSA3-4RSA3-5RSA3-6RSA3-9RSA3-12
6.689.55
15.5926.1046.7773.21
102.53
6.6810.1713.3615.5946.7776.26
111.85
14.2417.9035.7959.6674.57
112.11167.04245.81308.05
MA-2SSMA-3SSMA-4SS
SA2-1SSSA2-1.5SSSA2-2SSSA2-3SSSA2-4SS
SA3-1SSSA3-2SSSA3-3SSSA3-4SSSA3-5SSSA3-6SS
SA5-3SSSA5-5SSSA5-7SS
.34
.60
.78
.961.442.022.502.88
2.475.117.259.72
11.1212.35
8.3316.4217.78
.982.033.19
.902.033.324.709.49
1.906.86
12.5320.5332.0340.34
14.4160.9570.95
1.022.673.69
.952.143.494.949.97
1.997.21
13.1521.5633.6342.35
15.1361.8474.47
MODEL M1 M2 M3# Precision Series Crossed
Roller SlidesRefer to Page 19
RSA2-1SSRSA2-2SSRSA2-3SSRSA2-4SS
RSA3-1SSRSA3-2SSRSA3-3SSRSA3-4SSRSA3-5SS
RSA5-3SSRSA5-5SSRSA5-7SS
4.445.926.917.66
18.1024.1330.1635.9141.30
19.3021.2123.00
4.689.35
10.9112.11
15.0330.0750.1162.6472.03
72.2179.3692.75
4.919.82
11.4012.66
15.7931.5752.6265.7775.64
73.7581.0597.39
MODEL M1 M2 M3#
Precision Series Ball SlidesRefer to Page 19
N⋅m N⋅m N⋅m N⋅m N⋅m
N⋅m
N⋅mN⋅mN⋅m
N⋅mN⋅m
N⋅m
93
Posi-Drive StagesRefer to Page 27
High Precision Ball SlidesRefer to Page 22
HPMA-1HPMA-2HPMA-2.5HPMA-3
HPSA2-1HPSA2-1.5HPSA2-2HPSA2-3
HPSA3-1HPSA3-2HPSA3-3HPSA3-4HPSA3-5
HPSA4-2HPSA4-3HPSA4-5HPSA4-6.5HPSA4-9
HPSA5-5HPSA5-7HPSA5-10
.28
.40
.55
.74
.961.442.022.50
4.566.928.40
10.8711.94
11.1212.3514.0515.2416.89
16.1617.5219.42
.381.031.762.61
.902.033.324.70
3.769.30
14.5222.9734.40
32.0340.3452.5861.4581.07
60.4670.6793.23
.401.081.853.72
.952.143.494.94
3.989.77
15.2524.1236.12
33.6342.3553.7064.5385.12
61.7574.2197.89
MODEL M1 M2 M3#
NOTE: Ratings for FB (Flanged Base) typeare the same.
High Precision CrossedRoller Slides
Refer to Page 22
HPRSA2-1HPRSA2-1.5HPRSA2-2HPRSA2-3
HPRSA3-1HPRSA3-2HPRSA3-3HPRSA3-4HPRSA3-5
HPRSA4-2HPRSA4-3HPRSA4-5HPRSA4-6.5HPRSA4-9
HPRSA5-5HPRSA5-7HPRSA5-10
5.045.616.737.85
17.8820.3928.3737.6243.27
19.4621.6224.5926.6729.55
28.2730.6733.98
5.318.29
10.6312.40
14.8525.4147.1365.6275.46
56.0670.5992.01
107.54141.87
105.81123.67163.15
5.588.58
11.1612.96
15.6026.6849.4968.9079.24
58.8674.1293.97
112.92148.96
108.06129.86171.31
MODEL M1 M2 M3#
NOTE: Ratings for FB (Flanged Base) typeare the same.
Moment Load Ratings
5.506.297.34
12.84
6.347.068.469.86
14.80
21.5428.7235.9142.7557.4564.3574.5478.78
MODEL M1 M2 M3#
MODEL M1 M2 M3#
.711.422.375.81
.952.143.494.949.97
1.997.21
13.1521.5642.3553.9275.1685.12
LSA1-25LSA1-50LSA1-75LSA1-100
LSA2-25LSA2-38LSA2-50LSA2-75LSA2-100
LSA3-25LSA3-50LSA3-75LSA3-100LSA3-150LSA3-200LSA3-250LSA3-300
.63
.831.041.46
.961.442.022.502.88
2.475.117.259.72
12.3513.8416.0316.89
.681.362.265.54
.902.033.324.709.49
1.906.86
12.5320.5340.3449.9471.1481.07
7.0210.0316.3749.11
7.0211.1214.0316.2949.11
18.7937.5862.6478.30
175.39223.29311.25352.70
LRSA1-25LRSA1-50LRSA1-75LRSA1-100
LRSA2-25LRSA2-38LRSA2-50LRSA2-75LRSA2-100
LRSA3-25LRSA3-50LRSA3-75LRSA3-100LRSA3-150LRSA3-200LRSA3-250LRSA3-300
6.689.55
15.5946.77
6.6810.4213.3615.5946.77
17.9035.7959.6674.57
167.04206.81294.61324.41
N⋅m N⋅m N⋅m
N⋅m N⋅m N⋅m
N⋅m N⋅m N⋅m N⋅m N⋅m N⋅m
94
Ball Slide Positioning Stages & Side Drive StagesRefer to Page 44
99MM101MM201MM301MM
450MM451MM453MM750MM751MM753MM
301PMM451PMM452PMM751PMM752PMM
401MM501MM
.11
.19
.28
.50
.96
.96
.964.944.944.94
.50
.96
.964.944.94
.962.02
.11
.18
.27
.50
.96
.96
.964.944.944.94
.681.131.135.755.75
.962.02
.11
.18
.27
.50
.96
.96
.964.944.944.94
.711.191.196.046.04
.962.02
502MM701MM702MM
1201MM1203MM2201MM2202MM2203MM2204MM3201MM3202MM3203MM3204MM
1202PMM1204PMM2205PMM2206PMM3205PMM3206PMM
2.024.944.94
2.052.053.213.213.213.214.254.254.254.25
2.892.894.804.804.807.11
2.024.944.94
1.951.953.043.043.043.044.054.054.054.05
1.951.953.043.043.044.05
2.024.944.94
1.951.953.043.043.043.044.054.054.054.05
2.052.053.213.213.214.25
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
Crossed Roller Positioning Stages & Side Drive StagesRefer to Page 50
R101MMR201MMR301MM
R450MMR451MMR453MMR750MMR751MMR753MM
R301PMMR451PMMR452PMMR751PMMR752PMM
R401MMR501MMR502MM
1.091.642.88
1.921.921.929.889.889.88
1.671.921.929.889.88
1.923.843.84
1.041.562.88
1.921.921.929.889.889.88
2.262.262.26
11.5011.50
1.923.843.84
1.041.562.88
1.921.921.929.889.889.88
2.372.372.37
12.0712.07
1.923.843.84
R701MMR702MM
R1201MMR1203MMR2201MMR2202MMR2203MMR2204MMR3201MMR3202MMR3203MMR3204MM
R1202PMMR1204PMMR2205PMMR2206PMMR3205PMMR3206PMM
13.1813.18
5.815.819.109.109.109.10
12.0512.0512.0512.05
8.198.19
13.6013.6013.6020.15
13.1813.18
5.535.538.608.608.608.60
11.4711.4711.4711.47
5.535.538.608.608.60
11.47
13.1813.18
5.535.538.608.608.608.60
11.4711.4711.4711.47
5.815.819.109.109.10
12.05
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
Moment Load Ratings
95
Crossed Roller Rail SetsRefer to Page 65
NB1-020NB1-030NB1-040NB1-050NB1-060NB1-070NB1-080
NB2-030NB2-045NB2-060NB2-075NB2-090NB2-105NB2-120NB2-135NB2-150NB2-165NB2-180
NB3-050NB3-075NB3-100NB3-125NB3-150NB3-175
0000000
00000000000
000000
1.102.174.156.90
10.3414.5618.01
2.466.17
11.6016.1324.4030.7941.8950.1464.0879.8797.62
9.8619.9638.9157.2387.16
115.09
1.152.274.367.24
10.8515.2918.90
2.596.47
12.1916.9425.6232.3244.0052.6567.2883.86
102.50
10.3620.9640.8660.0991.51
120.84
NB3-200NB3-225NB3-250NB3-275NB3-300NB3-325NB3-350
NB4-080NB4-120NB4-160NB4-200NB4-240NB4-280NB4-320NB4-360NB4-400NB4-440NB4-480
NB6-100NB6-150NB6-200NB6-250NB6-300NB6-350NB6-400
0000000
00000000000
0000000
156.18191.11243.20286.35349.36400.73474.74
27.9568.05
126.23200.81297.13406.91533.90678.17839.62
1026.771223.50
90.82202.02350.75548.04779.78
1063.191390.38
163.99200.67255.36300.66366.83420.77498.48
29.3571.45
132.54210.85311.98427.26560.60712.08881.61
1078.101284.67
95.36212.12368.29575.44818.77
1116.351459.90
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
Low Profile Crossed Roller Slide TablesRefer to Page 62
LPTA-1025LPTA-1035LPTA-1045LPTA-1055LPTA-1065LPTA-1075LPTA-1085
LPTA-2035LPTA-2050LPTA-2065LPTA-2080
.801.041.511.741.942.272.55
2.353.714.415.58
1.292.594.555.368.16
11.5813.93
3.066.499.92
15.35
1.332.714.795.638.33
12.1714.63
3.216.80
10.4216.12
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
LPTA-2095LPTA-2110LPTA-2125
LPTA-3055LPTA-3080LPTA-3105LPTA-3130LPTA-3155LPTA-3180LPTA-3205
6.177.057.64
9.8714.4217.2421.5524.2927.8229.46
20.0526.4532.47
14.8131.0948.5674.75
100.22135.58157.61
21.0627.7734.10
15.5532.6450.9178.49
105.19142.36165.52
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
Moment Load Ratings
96
Anti-Creep Crossed Roller Rail SetsRefer to Page 69
NB2-030-ACNB2-045-ACNB2-060-ACNB2-075-ACNB2-090-ACNB2-105-ACNB2-120-ACNB2-135-ACNB2-150-ACNB2-165-ACNB2-180-AC
NB3-050-ACNB3-075-ACNB3-100-ACNB3-125-ACNB3-150-ACNB3-175-AC
00000000000
000000
2.466.17
11.6016.1324.4030.7941.8950.1464.0879.8797.62
9.8619.9638.9157.2387.16
115.09
2.596.47
12.1916.9425.6232.3244.0052.6567.2883.86
102.50
10.3620.9640.8660.0991.51
120.84
NB3-200-ACNB3-225-AC
NB4-080-ACNB4-120-ACNB4-160-ACNB4-200-ACNB4-240-ACNB4-280-AC
NB6-100-ACNB6-150-ACNB6-200-ACNB6-250-ACNB6-300-ACNB6-350-ACNB6-400-AC
00
000000
0000000
156.18191.11
27.9568.05
126.23200.81297.13406.91
90.82202.02350.75548.04779.78
1063.191390.38
163.99200.67
29.3571.45
132.54210.85311.98427.26
95.36212.12368.29575.44818.77
1116.351459.90
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
Moment Load Ratings
Crossed Roller Slide Tables (Aluminum)Refer to Page 72
NBT-1050AMNBT-1065AMNBT-1080AMNBT-1095AMNBT-1125AM
NBT-2035A-18MNBT-2050AMNBT-2050A-30MNBT-2065AMNBT-2065A-40MNBT-2080A-50MNBT-2080AMNBT-2095A-60MNBT-2095AMNBT-2110A-70MNBT-2125AMNBT-2125A-80MNBT-2155A-100MNBT-2185A-120M
NBT-3055AMNBT-3055A-30MNBT-3080A-45M
SSSSSSSSSS
SSSSSSSSSSSSSSSSSSSSSSSSSSSS
SSSSSS
2.512.983.804.245.17
2.603.473.474.114.115.235.235.845.846.647.147.14
10.7112.86
10.8110.8112.97
6.379.32
14.0918.2430.61
4.786.376.379.329.32
14.0914.0918.2418.2424.3630.6130.6145.9255.09
14.5214.5217.42
6.699.78
14.7919.1432.14
5.026.696.699.789.78
14.7914.7919.1419.1425.6232.1432.1448.2257.86
15.2515.2518.30
MODEL STAINLESS M1 M2 M3# STEEL N⋅m N⋅m N⋅m
NBT-3105AMNBT-3105A-60MNBT-3130A-75MNBT-3155AMNBT-3155A-90MNBT-3180AMNBT-3180A-105MNBT-3205AMNBT-3205A-130MNBT-3230A-155MNBT-3255A-180MNBT-3280A-205MNBT-3305A-230M
NBT-4085AMNBT-4125AMNBT-4165AMNBT-4205AMNBT-4245AM
NBT-6110AMNBT-6160AMNBT-6260AMNBT-6360AM
SSSSSSSSSSSSSSSSSSSSSSSSSS
SSSSSSSSSS
SSSSSSSS
18.9418.9420.8324.7024.7030.5430.5432.2832.2835.5138.0041.4143.89
34.4448.0557.9069.6781.36
55.5395.73
144.24183.18
47.8747.8752.6699.2199.21
125.30125.30145.03145.03159.53170.70186.06197.23
45.5992.76
160.80219.04305.16
78.82206.38523.53888.04
50.2750.2755.29
104.17104.17131.56131.56152.27152.27167.50179.22195.35207.07
47.8797.40
168.83229.99320.42
82.75216.70549.70932.44
MODEL STAINLESS M1 M2 M3# STEEL N⋅m N⋅m N⋅m
97
Crossed Roller Slide Tables (Steel)Refer to Page 78
NBT-1025NBT-1035NBT-1045NBT-1055NBT-1065NBT-1075NBT-1085
NBT-2035NBT-2050NBT-2065NBT-2080NBT-2095NBT-2110NBT-2125NBT-2140NBT-2155NBT-2170NBT-2185
NBT-3055NBT-3080
.68
.921.151.491.832.072.30
3.174.945.947.548.339.51
10.3011.5012.2913.4814.27
15.5222.69
.881.622.543.955.607.389.39
4.078.53
13.2120.4526.7235.2343.2553.9363.7076.5288.07
19.7241.44
.931.692.684.155.897.759.86
4.278.96
13.8721.4828.0536.9945.4156.6266.8980.3592.48
20.7043.51
NBT-3105NBT-3130NBT-3155NBT-3180NBT-3205NBT-3230NBT-3255NBT-3280NBT-3305
NBT-4085NBT-4125NBT-4165NBT-4205NBT-4245NBT-4285NBT-4325
NBT-6110NBT-6160NBT-6210NBT-6260NBT-6310
27.1233.9038.2143.7646.2251.7755.4660.4064.10
49.3368.7182.8099.54
116.27131.24146.22
79.33136.84172.54206.25237.98
64.5999.56
133.48177.18205.52250.72290.66340.28386.86
65.75133.57206.97309.65432.78561.36715.15
125.28303.92493.83723.00985.87
67.82104.54140.15186.05215.80263.25305.19357.30406.20
69.03140.25217.31325.13454.41589.43750.91
131.54319.11518.53759.14
1035.17
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
MODEL M1 M2 M3# N⋅m N⋅m N⋅m
Anti-Creep Crossed Roller Slide Tables (Aluminum)Refer to Page 75
NBT-1050AMNBT-1065AMNBT-1080AMNBT-1095AMNBT-1125AM
NBT-2035A-18MNBT-2050AMNBT-2065AMNBT-2080AMNBT-2095AMNBT-2110A-70MNBT-2125AMNBT-2155A-100MNBT-2185A-120M
NBT-3055AMNBT-3080A-45M
SSSSSSSSSS
SSSSSSSSSSSSSSSSSS
SSSS
2.512.983.804.245.17
2.603.474.115.235.846.647.14
10.7112.86
10.8112.97
6.379.32
14.0918.2430.61
4.786.379.32
14.0918.2424.3630.6145.9255.09
14.5217.42
6.699.78
14.7919.1432.14
5.026.699.78
14.7919.1425.6232.1448.2257.86
15.2518.30
MODEL STAINLESS M1 M2 M3# STEEL N⋅m N⋅m N⋅m
NBT-3105AMNBT-3130A-75MNBT-3155AMNBT-3155A-90MNBT-3180AMNBT-3205AMNBT-3230A-155M
NBT-4085AMNBT-4125AMNBT-4165AMNBT-4205AMNBT-4245AM
NBT-6110AMNBT-6160AMNBT-6260AMNBT-6360AM
SSSSSSSSSSSSSS
SSSSSSSSSS
SSSSSSSS
18.9420.8324.7024.7030.5432.2835.51
34.4448.0557.9069.6781.36
55.5395.73
144.24183.18
47.8752.6699.2199.21
125.30145.03159.53
45.5992.76
160.80219.04305.16
78.82206.38523.53888.04
50.2755.29
104.17104.17131.56152.27167.50
47.8797.40
168.83229.99320.42
82.75216.70549.70932.44
MODEL STAINLESS M1 M2 M3# STEEL N⋅m N⋅m N⋅m
Moment Load Ratings
Recirculating Ball Slide GuidesRefer to Page 81
BSGS5BSGS5UU
BSGS8BSGS8UU
BSG10BSG10UUBSGS10BSGS10UU
BSG13BSG13UUBSGS13BSGS13UU
BSG16BSG16UUBSGS16BSGS16UU
BSG25BSG25UUBSGS25BSGS25UU
1.20
4.12
6.87
8.82
21.57
51.00
1.50
4.90
7.85
10.79
25.50
60.82
MODEL#
M1N⋅m
M2N⋅m
M3N⋅m
BSGS9WBSGS9WUU
BSG12WBSG12WUUBSGS12WBSGS12WUU
BSG14WBSG14WUUBSGS14WBSGS14WUU
BSG16WBSG16WUUBSGS16WBSGS16UU
10.79
13.73
37.27
40.21
12.76
16.68
21.57
48.06
15.69
30.40
51.98
148.11
MODEL#
M1N⋅m
M2N⋅m
M3N⋅m
Moment Load Ratings
1.90
5.20
11.77
18.63
40.21
98.09
98
UNITED COMPONENTS EUROPE
HAMOTEK Montagetechnik GmbHFürstenweg 1D-83395 Freilassing
Tel. +49(0)8654/7709663Fax +49(0)8654/[email protected]
HÄNDLERADRESSE
UN ITED COMPONENTS EUROPE