Quality-Assurance System for Manufacturer of MaterialsASTM A285 / ASME SA285 AR Hot rolled plate 5...

TÜV Rheinland Industrie Service GmbH E-008-D-Rev22 Notifizierte Stelle für Druckgeräte, Kennnummer: 0035 Am Grauen Stein, D-51105 Köln

Certificate

Quality-Assurance System

for Manufacturer of Materials

acc. to Directive 2014/68/EU Certificate no.: 01 202 ROK/Q-10 0044 Name and address of the manufacturer:

Dongkuk Steel Mill Co.,Ltd. 25, Godaegongdan1-gil, Songak-eup, Dangjin-si, Chungcheongnam-do 31719 Korea

Herewith we certify that the material manufacturer has established and applies a Quality Management System. The system was audited according to the European Directive 2014/68/EU, Annex I, Par. 4.3, with regard to the materials as listed in the scope of approval.

Tested acc. to Directive 2014/68/EU:

QM System acc. to EN 764-5, article 4.2

Audit report no.:

ROK/Q-10 0044

Area of validity:

Steel Plates for Pressure Purpose, see annex to certificate

Manufacturing plant:

Dongkuk Steel Mill Co.,Ltd. 25, Godaegongdan1-gil, Songak-eup, Dangjin-si, Chungcheongnam-do 31719 Korea

Valid until:

March 29, 2022

Cologne, April 15, 2019 Dipl.-Ing. (FH) Roman Alexander Meyers

Annex to Certificate No. : 01 202 ROK/Q-10 0044

E-100-E-Questionnaire MM-Form8-Scope-Rev22(2019).doc Rev. 22

Scope according to

Directive 2014/68/EU Annex I §4.3

EN 764-4 AD 2000-Merkblatt W0

FPC, Regulation (EU) No. 305/2011(System 2+)

Manufacturer Work Nationality Date Page No..

Company Name: Dongkuk Mill Steel Co., Ltd 08. Jan 2019

1 TÜV Rheinland

Dangjin Korea Industrie Service

Location: 25, Godaegongdan1(il)-gil, Song-ak-eup, Dangjin-si, Chungcheongnam-do, Korea

Rev.: 4 of : 3 GmbH

Cur

-

Materials-term Materials-No.

Material Specification

Delivery Cond.

Article Type of Product

Dimensions Weight max

Technical Specifications

Remarks

Thick-ness Requirements

mm mm 1=t / 2=kg

Technical Regulations

from Up to

from

Up to

result

1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10

1. Materials according to harmonized European standards (hEN) and European Approval for Materials (EAM) acc. Directive 2014/68/EU

The use of the materials according to Directive 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the particular

material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved. The requirements and limits of the

applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.

1 P275NL1, P275NL2, P355N, P355NL1, P355NL2

EN 10028-3:2009 N, NT Hot rolled plate

4,5 100 - - - - EN 10028-1:2009

EN 10029

Remarks +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved



Scope according to






2 TÜV Rheinland



Rev.: 4 of : 3 GmbH

Cur

-



Delivery Cond.




Remarks

Thick-ness Requirements

mm mm 1=t / 2=kg


from Up to

from Up to

result

1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10

2. Materials according to international standards(e.g. ASTM, ASME, IBR, AD-2000 etc.)

The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the particular



1 S235JR+N, S235J2+N, S275JR+N, S275J2+N, S355J2+N, S355K2+N

EN 10025-2:2004 AR, N Hot rolled plate

4,5 100 - - - - EN 10025-1:2004

EN 10029

The materials meet the general mechanical and technological requirments for the PED.

2 C ASTM A283 / ASME SA283

AR,M Hot rolled

plate 5 60 - - - -

ASTM A283 / ASME SA283

The pressure equipments manufacturer must define the specific operation condition.

3 C ASTM A285 / ASME SA285

AR Hot rolled

plate 5 40 - - - -


As applicable, the pressure equipment manufacturer or the notified body involved

4 - ASTM A36 / ASME SA36

AR Hot rolled

plate 5 203 - - - -


has to agree(See PED, Annex I, sec. 4.2).

5 60, 65, 70 ASTM A516 / ASME SA516

AR, N Hot rolled

plate 5 100 - - - -


PMA is requested for material grades mentioned in non harmonized standards.

6 Cl1 ASTM A537/ ASME SA537

N Hot rolled

plate 5 70 - - - -

ASTM A537/ ASME SA537

Remarks +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved



Scope according to






3 TÜV Rheinland



Rev.: 4 of : 3 GmbH

Cur

-



Delivery Cond.




Remarks

Thick-ness

Requirements

mm mm 1=t / 2=kg


from Up to

from Up to

result

1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10

2. Materials according to international standards(e.g. ASTM, ASME, IBR, AD-2000 etc.)

The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the particular



7 50 ASTM A572 / ASME SA572

AR,N,M Hot rolled

plate 5 100 - - - -


The materials meet the general mechanical and technological requirments

8 70 ASTM A573 / ASME SA573

N Hot rolled

plate 5 40 - - - -


for the PED. The pressure equipments manufacturer must define the specific operation condition.

As applicable, the pressure equipment manufacturer or the notified body involved

has to agree(See PED, Annex I, sec. 4.2).

PMA is requested for material grades

mentioned in non harmonized standards.

Results +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved

Quality-Assurance System for Manufacturer of MaterialsASTM A285 / ASME SA285 AR Hot rolled plate 5...

Documents

Transcript of Quality-Assurance System for Manufacturer of MaterialsASTM A285 / ASME SA285 AR Hot rolled plate 5...