AGFEO IP-Video TFE - peaknx.com · nummer“ wählen und die Rufnummer „**xxx“ des Controlminis...
Transcript of AGFEO IP-Video TFE - peaknx.com · nummer“ wählen und die Rufnummer „**xxx“ des Controlminis...
AGFEO IP-Video TFE Einrichtung mit einen PEAKnx Touch-Panel und YOUVI
www.peaknx.com2
DE Einrichtung einer AGFEO Türsprechanlage mit einem PEAKnx Touch-Panel
In diesem Dokument erwähnte Produktnamen können Marken oder eingetragene Marken der jeweiligen Eigentümer sein. Diese sind nicht ausdrücklich durch „™“ und „®“ gekennzeichnet.© DOGAWIST Investment GmbH
PEAKnx a DOGAWIST Investment GmbH Division Otto-Röhm-Straße 69 64293 Darmstadt Deutschland
www.peaknx.com [email protected] 1.2.0 (November 2019)
Erstellt zur Nutzung mit folgendem Produkt Kompatible Türstation
Controlpro, Controlmini, YOUVI AGFEO IP-Video TFE 1
www.peaknx.com 3
DE Einrichtung einer AGFEO Türsprechanlage mit einem PEAKnx Touch-Panel
Inhaltsverzeichnis
Einleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41. Fritzbox-Konfiguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1. Einrichten des Controlminis/-pros in der Fritzbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.2. Einrichten der AGFEO Türsprechanlage in der Fritzbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Einrichten der AGFEO Türsprechanlage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53. Einrichten des YOUVI Kameramoduls (mit Bria Solo Free) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84. Technischer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Über PEAKnx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
www.peaknx.com4
DE Einrichtung einer AGFEO Türsprechanlage mit einem PEAKnx Touch-Panel
Einleitung
In der folgenden Anleitung wird erläutert, wie Sie eine AGFEO IP Video Türstation mit Ihrem PEAKnx Touch-Panel einrichten. Die Kommunikation zwischen dem Touch-Panel und der Türstation erfolgt über SIP. Stellen Sie daher bitte sicher, dass sich beide Geräte im selben Netzwerk befinden und YOUVI über einen Internetzugang verfügt.
1. Fritzbox-Konfiguration
1.1. Einrichten des Controlminis/-pros in der Fritzbox1. Öffnen Sie den Browser und geben Sie in die Adresszeile „fritz.box“ ein und melden Sie
sich bei Ihrer Fritzbox an.2. Navigieren Sie zu Telefonie -> Telefoniegeräte.3. Gehen Sie auf „Neues Gerät einrichten“, wählen Sie im nächsten Schritt die Option
„Telefon“ und gehen Sie auf „Weiter“.4. Wählen Sie „LAN/WLAN (IP-Telefon)“, vergeben Sie einen aussagekräftigen Namen z.B.
„Controlmini“ und wählen Sie „Weiter“.
■ Geben Sie Benutzername und Passwort für das Controlmini an und notieren Sie diese. Achten Sie darauf, ein sicheres Passwort zu vergeben. Das bedeutet, es sollte weder dem Benutzernamen entsprechen noch zu kurz oder zu leicht zu erraten sein. Wir empfehlen Ihnen ein automatisch generiertes Zufallspasswort zu nutzen.
5. Bestätigen Sie die vergebene Rufnummer und wählen Sie „Weiter“.6. Wählen Sie „Nur Anrufe für folgende Rufnummern annehmen“ und „Weiter“.7. Sie erhalten eine Übersicht, die Sie mit „Übernehmen“ bestätigen können. Drücken Sie
einen beliebigen Knopf auf der Fritzbox, um die Eingaben für den Router zu bestätigen.
1.2. Einrichten der AGFEO Türsprechanlage in der Fritzbox8. Unter Telefonie-> Telefoniegeräte gehen Sie erneut auf „Neues Gerät einrichten“ und
wählen Sie im nächsten Schritt die Option „Türsprechanlage“ und „Weiter“.9. Der Anschluss wird über „LAN/WLAN (IP-Türsprechanlage)“ vorgenommen.10. Vergeben Sie einen aussagekräftigen Namen für die Türsprechanlage und gehen Sie
auf „Weiter“.11. Geben Sie Benutzername und Passwort für die Türsprechanlage an und notieren Sie
diese.
■ Sonderzeichen, Leerzeichen oder Umlaute sollten vermieden werden.
■ Achten Sie darauf, ein sicheres Passwort zu vergeben. Das bedeutet, es sollte
www.peaknx.com 5
DE Einrichtung einer AGFEO Türsprechanlage mit einem PEAKnx Touch-Panel
weder dem Benutzernamen entsprechen noch zu kurz oder zu leicht zu erraten sein. Wir empfehlen Ihnen ein automatisch generiertes Zufallspasswort zu nutzen.
12. Wählen Sie für „Klingel weiterleiten an“: „Controlmini“ aus und gehen Sie auf „Weiter“.
■ Sollte diese Option nicht im Auswahlmenü erscheinen, können Sie hier auch “Ruf-nummer“ wählen und die Rufnummer „**xxx“ des Controlminis in der Fritzbox eingeben. In diesem Beispiel wäre das die „**627“.
13. Sie erhalten eine Übersicht, die Sie mit „Übernehmen“ bestätigen können.
2. Einrichten der AGFEO Türsprechanlage
14. Schließen Sie das AGFEO-Gerät an einen PoE-fähigen Switch oder eine Spannungs-quelle und das Netzwerk an und notieren Sie sich die während des Starts angezeigte IP-Adresse.
15. Geben Sie diese in den Browser ein, um die AGFEO Türstation zu konfigurieren. 16. Das Passwort ab Werk ist „admin“.
www.peaknx.com6
DE Einrichtung einer AGFEO Türsprechanlage mit einem PEAKnx Touch-Panel
17. Unter SIP-Konfiguration geben Sie den Benutzernamen, Authentifizierungsnamen und das Passwort ein, welche Sie für die AGFEO Türstation in der Fritzbox vergeben haben.
■ Ihre Anmeldedaten finden Sie auch unter fritz.box-> Telefoniegeräte, wenn Sie die angelegte Türsprechanalage bearbeiten und zum Reiter „Anmeldedaten“ wechseln.
■ Der Server ist wiederum fritz.box.18. Der Status sollte nun grün anzeigen.19. Wählen Sie unter Netzwerk (LAN)-> Methode: „Dynamisch (DHCP)“ aus.20. Unter Klingeltaster wird die Rufnummer hinterlegt. Diese ist die gleiche, die Sie auch in
der Fritzbox für das Controlmini/-pro vergeben haben, z.B. „**627“ (intern 627).21. Zur Steuerung des Türöffners finden Sie unter Relais den Öffnungscode: DTMF: z. B. #9
■ Das heißt, wenn Sie nach Annahme eines Anrufes von der Türsprechanlage die Tür öffnen möchten, drücken Sie auf dem Bria Solo Free Nummernfeld einfach die „#9“.
22. Möchten Sie das Kamerabild der Türstation, zum Beispiel in YOUVI einbinden, finden Sie unter Video den entsprechenden Link.
23. Zur Nutzung der Türstation mit dem Controlpro, stellen Sie den Mikrofonpegel des Controlpros auf 20 ein.
■ Machen Sie dazu einen Rechtsklick oder einen langen Fingerdruck auf das Laut-sprechersymbol in der Taskleiste und wählen Sie „Sounds“ aus.
■ Unter dem Reiter „Aufnahme“ wählen Sie das erste Mikrofon.
■ Im darauffolgenden Menü können Sie unter dem Reiter „Pegel“ den Mikrofonpe-gel einstellen.
www.peaknx.com 7
DE Einrichtung einer AGFEO Türsprechanlage mit einem PEAKnx Touch-Panel
24. Stellen auf der AGFEO-Konfigurationsseite die Lautsprecher und Mikrofonlautstärke für die Nutzung mit dem Controlpro wie unten gezeigt ein.
25. Zur Nutzung der Türstation mit dem Controlmini überprüfen Sie, ob die Soundeinstel-lungen des Controlminis, wie auf dem Bild gezeigt, eingestellt sind. Gehen Sie dazu wie beim Controlpro vor.
26. Stellen auf der AGFEO-Konfigurationsseite die Lautsprecher und Mikrofonlautstärke für die Nutzung mit dem Controlmini wie unten gezeigt ein.
www.peaknx.com8
DE Einrichtung einer AGFEO Türsprechanlage mit einem PEAKnx Touch-Panel
3. Einrichten des YOUVI Kameramoduls (mit Bria Solo Free)
Hinweise zum Kamera-StreamAuf der Konfigurationsseite der Türstation finden Sie unter Video verschiedene Links, um das Kamerabild der Türsprechanlage als Videostream zu nutzen. Sie können hier ebenfalls die Auflösung und die Bildwiederholrate eingeben, um Ihr Netzwerk durch den Stream nicht unnötig zu überlasten.
Um die eingebaute Kamera der AGFEO Türstation verwenden zu können, muss diese in YOUVI Configuration hinzugefügt und eingerichtet werden. 1. Um das Kamera-Modul hinzuzufügen, öffnen Sie am Panel YOUVI Dashboard und wäh-
len Sie Kamera installieren. Sollten Sie noch keine Volllizenz besitzen, können Sie diese im PEAKnx Shop erwerben.
2. Wechseln Sie auf dem Panel zu YOUVI Dashboard -> Kamera ODER öffnen Sie die Konfigurationsseite am PC in Ihrem Browser, wobei sicherzustellen ist, dass sich das System, auf dem der Browser läuft, im selben Netzwerk befindet, wie das PEAKnx Touch-Panel. Dazu geben Sie folgende URL in Ihren Browser ein:
■ http://x.x.x.x:31228
■ Wobei x.x.x.x durch die lokale IP-Adresse Ihres PEAKnx Touch-Panels ersetzt werden muss. Diese finden Sie in den Fritzbox Einstellungen(fritz.box) unter Heimnetz und dem jeweiligen Gerät.
■ Wählen Sie aus dem Menü, links den Punkt „Kameras“.3. Fügen Sie über das „+“-Symbol ein neues Kamera-Set hinzu.
www.peaknx.com 9
DE Einrichtung einer AGFEO Türsprechanlage mit einem PEAKnx Touch-Panel
4. Klicken Sie auf das „+“-Symbol neben „Kamera-Stream auswählen“, um einen neuen Kamera-Stream hinzuzufügen.
5. Geben Sie der Kamera der AGFEO Türstation unter „Stream Name“ einen passenden Namen.
6. Ändern Sie den „Stream Type“ auf „MJPEG“.7. Tragen Sie sowohl unter „Low Resolution URL“, als auch unter „High Resolution URL“
den Link des Kamera-Streams von Ihrer Türstation ein. Sie finden diesen auf der AGFEO-Konfigurations-Website unter Video.
8. Speichern Sie diese Einstellungen mit Klick auf „Speichern“.9. Wechseln Sie innerhalb des PEAKnx Touch-Panels zurück zu YOUVI Visu10. Um zu gewährleisten, dass die Visualisierung bei einem Systemneustart automatisch
gestartet wird, öffnen Sie die YOUVI-Visu-Einstellungen unter Autostart und aktivieren Sie diesen.
11. Schalten Sie nun den Edit Mode ein und wechseln Sie zum Dashboard.12. Wählen Sie den Button „Webcam“ aus, um eine in YOUVI Configuration angelegte
Kamera zu wählen.
VoIP-Software Bria Solo FreeUm „Voice over IP“ auf dem Touch-Panel zu nutzen, benötigen Sie eine laufende Instanz von Bria Solo Free . Diese VoIP Software taucht bei einem Anruf von der Türstation vor Ihrer Visualisierung auf, sodass Sie das Kamerabild sehen und gleichzeitig den Anruf entgegennehmen können.13. Gehen Sie auf dem Panel auf folgende Website: https://www.counterpath.com/plan-
select-solo/.14. Tippen Sie auf „Continue with Bria Solo“.15. Zur Nutzung der Software müssen Sie zuerst einen Account anlegen.16. Dann wird das VoIP eingerichtet. Wählen Sie „Configure SIP Settings“
17. Tragen Sie für die „Domain“ die IP-Adresse Ihrer Fritzbox ein und für „SIP Username“ und „Password“ den Benutzernamen und Passwort ein, welche Sie für das Controlmini
www.peaknx.com10
DE Einrichtung einer AGFEO Türsprechanlage mit einem PEAKnx Touch-Panel
in der Fritzbox/SIP-Server vergeben haben.
■ Ihre Anmeldedaten finden Sie auch unter fritz.box -> Telefoniegeräte, wenn Sie das angelegte Controlmini (IP-Telefon) bearbeiten und zum Reiter „Anmeldedaten“ wechseln. Die IP-Adresse der Fritzbox ist auch unter „Registrar“ vermerkt.
18. Unter „Service Settings“ können Sie weitere Einstellungen treffen. Wählen Sie „Next Step“.
19. Wählen Sie den Download für Windows aus und installieren Sie die Software auf dem Controlmini/-pro.
20. Öffnen Sie die Software und loggen Sie sich ein. Erlauben Sie den Zugriff auf das Gerät.21. Durch den grünen Hörer wird Ihnen angezeigt, dass sich das Telefon erfolgreich bei
Ihrer Fritzbox registriert hat.
www.peaknx.com 11
DE Einrichtung einer AGFEO Türsprechanlage mit einem PEAKnx Touch-Panel
22. Um zu gewährleisten, dass die Bria Solo Free App bei einem Systemneustart automa-tisch gestartet wird, öffnen Sie die Einstellungen unter Softphone->Preferences und setzen Sie einen Haken bei “Beim Hochfahren von Windows automatisch starten.“
23. Um die Korrektheit dieser Einstellungen zu testen, betätigen Sie die Klingel an Ihrer AGFEO IP Video Türstation. Nach wenigen Sekunden sollte auf Ihrem PEAKnx Touch- Panel eine Benachrichtigung über einen eingehenden Anruf erscheinen.
24. Testen Sie die Lautstärke der Lautsprecher und des Mikrofons der Türstation. Wenn zu erwarten ist, dass es hohe Hintergrundgeräusche geben wird, können Sie unter Audio die Lautsprecher der Türstation entsprechend lauter einstellen.
25. Auf dem PEAKnx Touch-Panel kann zusätzlich zur normalen Lautstärke, auch die Lautstärke in Bria erhöht werden.
www.peaknx.com12
DE Einrichtung einer AGFEO Türsprechanlage mit einem PEAKnx Touch-Panel
4. Technischer Support
Sollten Probleme mit Ihrem Controlmini oder Controlpro auftreten, kontaktieren Sie bitteunser PEAKnx Support Team:
■ Mail: [email protected]
■ Support Ticket erstellen: https://support.peaknx.com/?lang=de
■ Tel.: +49-6151-279 1825
www.peaknx.com 13
DE Einrichtung einer AGFEO Türsprechanlage mit einem PEAKnx Touch-Panel
Über PEAKnx
Als Hersteller von innovativen Hard- und Softwarekomponenten entwickelt PEAKnx Produkte für eine zukunftssichere Gebäudeautomation. Zum Beispiel individuelle Front-End-Panels inklusive Visualisierung, die alle Informationen eines intelligenten Gebäudes an einem zentralen Punkt zur Verfügung stellen. Dabei wird großen Wert auf die Langlebigkeit der Produkte und das qualitative Zusammenspiel von Design und Funktionalität gelegt.
Als neuester Geschäftsbereich der PEAK-Firmengruppe mit Sitz in Darmstadt greift PEAKnx auf mehr als 25 Jahre Erfahrung im Hard- und Softwarebereich zurück. Durch ein breit aufgestelltes Netzwerk an zertifizierten Partnern bietet PEAKnx darüber hinaus auch die dazugehörigen Dienstleistungen – von der Beratung bis hin zur Installation und Realisierung von Automatisierungsprojekten. Ziel ist es, die Haus- und Gebäudeautomation durch inno-vative Lösungen komfortabel, kostensparend und zukunftssicher zu machen.
www.peaknx.com14
EN Set up of an AGFEO door station with a PEAKnx touch panel
AGFEO IP-Video TFE Setup with a PEAKnx touch panel and YOUVI
www.peaknx.com 15
EN Set up of an AGFEO door station with a PEAKnx touch panel
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171. Fritzbox Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.1. Setting up the Controlmini/-pro in the Fritzbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171.2. Setting up the AGFEO door intercom in the Fritzbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. Setting up the AGFEO door intercom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183. Setting up the YOUVI camera module (with Bria Solo Free) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204. Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24About PEAKnx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
www.peaknx.com16
EN Set up of an AGFEO door station with a PEAKnx touch panel
Created for use with the following products Compatible Doorstation
Controlpro, Controlmini, YOUVI AGFEO IP-Video TFE 1
The product names mentioned in this document may be brands or registered trademarksof their respective owners. These are not explicitly labeled with “™” or “®”.© DOGAWIST Investment GmbH
PEAKnxa DOGAWIST Investment GmbH DivisionOtto-Röhm-Straße 6964293 DarmstadtGermany
[email protected] Version 1.2.0 (November 2019)
www.peaknx.com 17
EN Set up of an AGFEO door station with a PEAKnx touch panel
Introduction
The following instructions explain how to set up an AGFEO IP Video Door Station with your PEAKnx touch panel. The communication between the touch panel and the door station is realized via SIP. Therefore, please make sure that both devices are part of the same network and that YOUVI has Internet access.
1. Fritzbox Configuration
1.1. Setting up the Controlmini/-pro in the Fritzbox1. Open the browser and enter „fritz.box“ into the address bar and log in to your Fritzbox.2. Navigate to Telephony -> Telephony Devices.3. Go to „Configure new device“, select the option „Telephone“ in the next step and go to
„Next“.4. Select „LAN/WLAN (IP telephone)“, assign a meaningful name, e.g. „Controlmini“ and
select „Next“.
■ Enter the username and password for the Controlmini and note them for later use. Be sure to give a secure password. This means it should not be the same as the user name nor too short or too easy to guess. We recommend that you use an automatically generated random password.
5. Confirm the assigned phone number and select „Next“.6. Select „Accept calls for the following numbers only“ and „Next“.7. You will get an overview, which you can confirm with „Apply“. Press any button on the
Fritzbox to confirm the input for the router.
1.2. Setting up the AGFEO door intercom in the Fritzbox8. Under Telephony > Telephony Devices, go to „Configure new device“ again and in the
next step select the option „Door Intercom System“ and „Next“.9. The connection is made via „LAN/WLAN (IP door intercom)“.10. Assign a meaningful name for the door intercom and press „Next“.11. Enter a username and password for the door intercom and note them down.
■ Special characters, umlauts or spaces should be avoided.
■ Be sure to give a secure password. This means it should not be the same as the user name nor too short or too easy to guess. We recommend that you use an automatically generated random password.
12. For „Route doorbells to“, select „Controlmini“ from the drop-down list and go to „Next“.
www.peaknx.com18
EN Set up of an AGFEO door station with a PEAKnx touch panel
■ If this option does not appear in the selection menu, you can also select „tele-phone number“ and enter the phone number „** xxx“ of the Controlmini in the Fritzbox. In this example, that would be the „** 627“.
13. You will get an overview, which you can confirm with „Apply“.
2. Setting up the AGFEO door intercom
14. Connect the AGFEO device to a PoE-enabled switch or the network and a power sup-ply and write down the IP address displayed during startup.
15. Enter the IP address in the browser to configure the AGFEO door station.16. The default password is „admin“.17. Under SIP-Configuration enter the user name, authentication name and password that
you have assigned to the AGFEO door station in the Fritzbox.
■ You can also find your credentials under fritz.box -> Telephony Devices“ if you edit the created AGFEO door intercom and go to the tab „Login data“.
■ The server is again fritz.box.
www.peaknx.com 19
EN Set up of an AGFEO door station with a PEAKnx touch panel
18. The status should now show green.19. Select under Network (LAN) -> „Method“: „Dynamic (DHCP)“.20. The phone number is stored under Ringers. This is the same one you have given in the
Fritzbox for the Controlmini/ -pro, e.g. „** 627“ (internal 627).21. To control the door opener, you will find the opening code under Relay: DTMF: e.g. #9
■ If you want to open the door after accepting a call from the door phone, simply press „# 9“ on the Bria Solo Free number pad.
22. If you would like to integrate the camera image of the door station, for example in YOUVI, you will find the corresponding link under Video.
23. To use the door station with the Controlpro set the microphone level of the Cont-rolpro to 20.
■ To do this, right-click or long-press the loudspeaker icon in the taskbar and select „Sounds“.
■ In the „Recording“ tab, select the first microphone.
■ In the following menu, you can set the microphone level in the „Levels“ tab.
24. On the AGFEO Configuration page, set the speakers and microphone volume for use with the Controlpro as shown below.
25. To use the door station with the Controlmini, check that the sound settings of the Controlmini are set as shown in the picture. Therefore, proceed in the same way as for the Controlpro.
www.peaknx.com20
EN Set up of an AGFEO door station with a PEAKnx touch panel
26. On the AGFEO Configuration page, set the speakers and microphone volume for use with the Controlmini as shown below.
3. Setting up the YOUVI camera module (with Bria Solo Free)
Notes on the camera streamOn the configuration page of the door station you will find various links under Video to use the camera image of the door intercom as a video stream. You can also enter the resolution and refresh rate here to avoid overloading your network with the stream.
To make use of the AGFEO Door Station’s camera, it needs to be added and set up within YOUVI Configuration. 1. To add the camera module open YOUVI Dashboard on the panel and select Install
Camera Device. If you do not have a full license yet, you can purchase it in the PEAKnx Shop.
2. Switch to YOUVI Dashboard -> Camera Device OR open the configuration page at a PC in your browser, making sure that the system running the browser is on the same net-work as the PEAKnx Touch Panel. To do this, enter the following URL in your browser:
■ http://x.x.x.x:31228
■ Where x.x.x.x must be replaced by the local IP address of your PEAKnx touch panel. This can be found in the Fritzbox settings (fritz.box) under Home network
www.peaknx.com 21
EN Set up of an AGFEO door station with a PEAKnx touch panel
and the respective device.
■ From the menu on the left, select “Cameras”.3. Use the „+“ symbol to add a new camera set. 4. Click the “+”-Symbol next to “Select Camera Stream” to create a new camera stream.5. For the “Stream Name”, enter an appropriate name of your preference.6. Set the Stream Type to “MJPEG”.7. Enter the link of the camera stream from your door station under „Low Resolution
URL“ as well as under „High Resolution URL“. You can find it on the AGFEO configura-tion website under Video.
8. Click “Save” to register the settings with your PEAKnx touch panel.9. Within the PEAKnx Touch Panel, switch back to YOUVI Visu10. In order to ensure that the visualization is automatically activated when the system is
rebooted, open the YOUVI Visu settings under Auto start and activate this feature.11. Now switch on the Edit Mode and switch to the Dashboard.12. Select the „Webcam“ button to select a Camera created in YOUVI Configuration.
VoiP-Software Bria Solo FreeTo use „Voice over IP“ on the touch panel, you need a running instance of Bria Solo Free. This VoiP software appears when a call from the door station is made and pops up, even with the visualization running. So you can see the camera image and answer the call at the same time.13. On the panel, go to https://www.counterpath.com/plan-select-solo/.14. Tap on „Continue with Bria Solo“
www.peaknx.com22
EN Set up of an AGFEO door station with a PEAKnx touch panel
15. To use the software, you must first create an account.16. VoIP will then be set up. Select „Configure SIP Settings“.
17. For the „Domain“ enter the IP address of your Fritzbox and for „SIP Username“ and „Password“ enter the user name and password which you have assigned for the Cont-rolmini in the Fritzbox/SIP server.
■ Your login data can also be found under fritz.box -> Telephony devices, if you edit the created Controlmini (IP telephone) and switch to the „Login data“ tab. The IP address of the fritzbox is the same as „Registrar“.
18. You can make further settings under „Service Settings“. Select „Next Step“.19. Select the download for Windows and install the software on the Controlmini/-pro.20. Open the software and log in. Allow access to the device.21. The green handset indicates that the phone has successfully registered with your
Fritzbox.
www.peaknx.com 23
EN Set up of an AGFEO door station with a PEAKnx touch panel
22. To ensure that the Bria Solo Free App starts automatically when the system is rebooted, open the settings under Softphone->Preferences and check „Launch when Windows starts“.
23. To test the correctness of these settings, press the bell on your AGFEO IP Video door station. After a few seconds, your PEAKnx touch panel should display an incoming call notification.
24. Test the volume of the loudspeakers and microphone of the door station. If you expect there to be high background noise, you can adjust the volume of the door station‘s speakers accordingly under Audio.
25. On the PEAKnx touch panel, additionally to the normal volume, the volume can also be increased in Bria.
.
www.peaknx.com24
EN Set up of an AGFEO door station with a PEAKnx touch panel
4. Technical Support
If you experience problems with your Controlmini or Controlpro please contact our PEAKnx Support Team:
■ Mail: [email protected]
■ Create a Support Ticket: https://support.peaknx.com/?lang=en_US
■ Tel.: +49-6151-279 1825
www.peaknx.com 25
EN Set up of an AGFEO door station with a PEAKnx touch panel
About PEAKnx
As a manufacturer of innovative hardware and software components, PEAKnx develops products for future-proof building automation. For example, individual front-end panels including visualization, which make all information of an intelligent building available at a central point. Great importance is attached to the longevity of the products and the qualita-tive interaction of design and functionality.
As the newest division of the PEAK group headquartered in Darmstadt, Germany, PEAKnx can draw from more than 25 years of experience in hardware and software development. Through a broad network of certified partners, PEAKnx also offers the associated services - from consulting to the installation and implementation of automation projects. The goal is to make home and building automation comfortable, cost-saving and future-proof through innovative solutions.
www.peaknx.com